Search Results

Search found 14588 results on 584 pages for 'usb drive'.

Page 366/584 | < Previous Page | 362 363 364 365 366 367 368 369 370 371 372 373  | Next Page >

• How to route my internet from mobile broadband from a third party software to network manager

  - by user86865

  I use mobile broadband connection (Reliance Netconnect+ USB) for internet. I can connect to this network from Network Manager easily. There is a 3rd party software which is given by the service provider. I can also connect to the internet by using this software (Software from ZTE). But when i am using this software, i cannot upload files to Ubuntu One, Cannot install packages from Software Center, etc except i can load web pages from FireFox. But when using the connection from NM, i can do all the stuffs. But, there are so many options available in this 3rd party software. So, can i route my internet connection from this software to my Network Manager? There are some options available in the settings as;- Dns, alternate dns, static IP, CHAP, PAP. Can anyone help me?? I use 12.04.

  Read the article

• mobile broadband quick connect..how to?

  - by Ubuntuser

  Hello all, I have a Reliance broadband + mobile broadband connection. It connects fine, but the only problem is it takes more than 2 -3 mins to get the connection started. If I plug in the USB datacard, the network manager applet dothes not show up the mobile broadband connection immediately. It takes a good 2-3 mins to detect the connection before I can select Reliance connection from the dropdown list. Is there any way of getting a shortcut of that connection on the desktop or on the panel? Thanks, Sayantan

  Read the article

• Newb: First install of ubuntu, no wired or wireless

  - by Ienzo

  Ran 12.04 through a usb drive for a day or so, and had no issues outside of some latency that is more due to the lack of ram on my aspire one D255e than to OS. Had wireless running with no issue, and wired tested as working also. Ran the install and removed windows 7, wireless network is detected but ethernet is not, and neither gets connection. Disabled proprietary driver and rebooted, re-enabled driver and still neither. I know nothing of ubuntu yet! What do? _<

  Read the article

• Ubuntu not appearing in Boot Loader [new]

  - by Bryce

  I installed Ubuntu in a separate partition, along side Windows 8.1. However, Ubuntu/Grub does not appear in the Boot Loader. When I hold shift at startup, the regular Boot Loader (the one before I installed Ubuntu) appears with only Windows 8.1 as a boot option. I already tried the the Boot Repair from a Live USB, but nothing has changed. I have two partitions, one is a journaling file system (mounted on /) and the other is the swap. I read that it may be because Windows doesn't recognize the file system, but I don't know what to do about it. I don't know what I did wrong. Did I mount it in the wrong place? Any help would be appreciated. (If the problem is stupid, I apologize. I'm completely new to installing Ubuntu, and I could not find very detailed instructions.) Edit: In case this has any relevance, safe boot IS disabled.

  Read the article

• How To Change the Window Border Color in Windows 8

  - by Chris Hoffman

  Windows 8’s default blue window border color isn’t the only option. Windows 8 automatically selects the appropriate color depending on your wallpaper – you can also select a different color or use a third-party tool to easily select other colors. Changing the color of the window borders also changes the color of your taskbar. The taskbar and window borders use the same colors in Windows 8, although the taskbar is still partially transparent. HTG Explains: Does Your Android Phone Need an Antivirus? How To Use USB Drives With the Nexus 7 and Other Android Devices Why Does 64-Bit Windows Need a Separate “Program Files (x86)” Folder?

  Read the article

• Programmer avec les pieds, ça vous tente ? "SoftStep KeyWorx" améliore la productivité en mettant les orteils à contribution

  Programmer avec les pieds, ça vous tente ? "SoftStep KeyWorx" améliore la productivité en mettant à contribution les orteils Alors que les doigts du développeur se déchaînent à longueur de journée sur les centaines de touches de raccourci de son IDE qu'il maîtrise par coeur, ses pieds restent toujours posés sur le sol, inertes, ou même sur un pouf pour les mieux gâtés. Autant d'appendices inutiles sept heures par jour, voire deux fois plus pour beaucoup de geeks et bourreaux de travail ? Pour Keith McMillen Instruments, c'est du passé grâce à SoftStep KeyWorx, un nouveau gadget USB, destiné à mettre à contribution les pieds pour que la programmation devien...

  Read the article

• Can't install ubuntu 12.04 64 bit and 32 bit

  - by Mark

  I downloaded The Ubuntu 12.04 64 bit, i burned it from a cd and when I tried to install it i only and get a black screen and saying Peter Arvin et al could not find kermel image I thought there's a problem with the file so i downloaded it again and install it then i always get the same message. I tried also 32 bit and i always get the same error. I tried also installing it from a usb and i always get the same. So i just downloaded the WUBI and works so fine to my computer. I'm using Sony Vaio E Series with a 32 bit system and 500 GB hard Disk Drive.

  Read the article

• Fail to load Ubuntu11.10 onto ASUS PC 1015PX

  - by strugglingbadly

  My new ASUS 1015PX has the usual windows on the SDA1 partition - 100Gb, followed by SDA2 - 15Gb - with the recovery for windows, SDA3 with 183Gb for drive 'D' for windows. ASUS uses SDA4 - 19Mb for it's own use. 11.10 on an USB will load Ubuntu on a try basis and it seems OK, but every time I attempt an install, Ubuntu quickly shuts down and the restart process begins. Repeat endlessly. I've tried 10.4 netbook but that will not boot at all with the machine reporting - unknown keyword in config file gfxboot vesamenu.c32: not a COM32R image. I've gone through the above about 6 times each with the same results. I have also tried the above with the partitioning unchanged, and using gparted, with SDA3 formatted to ext4, windows 'D' reduced to 8Gb providing a 175Gb unallocated space - all to no avail. Please help

  Read the article

• networkprinting with cups in ubuntu 13.10

  - by gero

  I upgraded from Ubuntu 13.04 to Ubuntu 13.10. The printer configurations were transferred correctly. I have an USB laser printer, which still works if I connect my laptop directly. Usually I used this printer by wlan or bluetooth, where an old laptop works as server (cups 1.3.X). If I now want to print some pdf or postscript file, one or the other way I only obtain a header printed, not the content of the file. Curiously the Ubuntu 13.10 test page is printed correctly.

  Read the article

• 11.04 64 bit live install cd freezes immediately on boot

  - by wrchis

  I am trying to install 11.04 alpha to a free set of partitions to try it out but neither the regular graphic installer or the alternate installer work. The graphic one freezes when I try to boot the cd (or cd image on usb stick rather) with a distorted static picture of my regular desktop repeated four times. I have an nvidia 240 graphics card if that is any help in diagnosis. I think it is a matter of getting the cd image to use a low rez video mode but I have no idea how to force that. I have used both the iso's from the regular page and the daily page (for several days so far) and they all do the same thing. I have tried both the internal utility and unetbootin to set up the stick with the same results. The alternate installer seems to work up to the point of the software selection step and then throws a 'failed step' error part way through.

  Read the article

• VMWare Player pauses often

  - by pascal

  I'm using a 64bit Windows 8 inside vmplayer, with 2 virtual processor cores, virtual hard disk resides on a fast local disc and is not preallocated; host CPU is Intel i7 3770, should be capable of hardware virtualisation but I don't know if VMWare uses it; NAT networking; Sound card connected, USB connected, accelerated 3D graphics (NVidia 313.30 on host) My problem is, that the VM often pauses for a few seconds, and then speeds up for a few seconds to reach real time again. Time in the VM actually moves faster after the pause, for example all animations using timers speed up. When running, the vmware-vmx process shows ~150% CPU usage in top, but 0% when pausing (and D state i.e. waiting for IO). iotop shows normal disk writes from vmware-vmx threads, but during pauses, the flush kernel thread uses 99%. Are there some options to try so that VMWare doesn't wait for IO? I've tried a few things available from the GUI but the issue never went away…

  Read the article

• After Upgrading to 12.04 the Kernel won't Initiate

  - by Jeff

  I had 11.10 and tried to upgrade recently, via the installer pop-up reminder. Afterwards it would not boot, citing an issue with the kernel. So I've setup a 12.04 installation USB, which appears to work fine. The problem is it doesn't provide an upgrade option, just format and install or install alongside the current broken kernel. I believe I should be able to still get the information from the broken OS after installing alongside, but if there is a way to fix this more directly that would be preferable.

  Read the article

• Printing Problem on Shared Printer

  - by paulus_almighty

  I'm using Ubuntu 11.10 on two machines. One has a USB printer connected. I want to share this printer with the other over the wireless network. Under Printing > Server > Settings: I have Publish shared printers connected to this system and Allow printing from the internet enabled. All other checkboxes are disabled. When I right click on the printer icon, I can see enabled and shared are ticked. On my other machine, I can now click on add network printer. It finds the machine name of the server and correctly identifies the printer. However, print test page fails. Under printer properties the printer state says: Processing - Unable to connect to printer; will retry in 30 seconds... What's gone wrong?

  Read the article

• Mount external HD ubuntu 12.10

  - by Luigi Tiburzi

  Although it's an abundantly treated matter, I'm unable to find an answer valid for my needs. I had a 12.04 installation of ubuntu and I decided to install the 12.10. I copied (using GParted) the partition where my system was to an external hd where there is a windows partition. Then I installed the newest ubuntu version and now I want to take back some files (for example my .emacs) from that partition but when I try to mount it, it is not found as sdb and if I mount it from /dev/usb/hddev0 I don't get any output, only a blinking cursor, no errors, no output. I even tried to mount it as an ntfs disk but the result was the same. It's like the hd cannot be detected. So how can I access data to that disk? Could I get them from GParted terminal instead of Ubuntu one? Thanks

  Read the article

• Ubuntu 12.10 install freezes at configuring hardware

  - by Max Keener

  I'm installing Ubuntu 12.10 (64 bit) from a bootable USB stick. At first I had trouble with a black screen after selecting 'install ubuntu'. I added nomodeset and xforcevesa to the options to fix that problem. Now when installing, it hangs at 'Configuring Hardware', specifically at ubuntu ubiquity: update-initramfs: Generating /boot/initrd.img-3.5.0-17-generic Specs: Asus UX32a DB51 Intel Core i5 3317U 1.7 GHz 4GB DDR3 RAM intel hd 4000 graphics 500 GB harddrive with 25 GB sandisk ssd I'm trying to install Ubuntu by itself right now on the SSD. I made custom partitions (100 mb EFI boot partition, 4GB swap space, 20GB ext4 mounted on '/') I've tried re-downloading the ubuntu iso and creating a new boot image on my flash drive and it results in the same problem. Thanks in advance for the help!

  Read the article

• Trouble installing 12.04 from cd, blank screen with cursor

  - by Master Morality

  I should preface this with saying that this is not my first rodeo. I started playing with Linux in 1999 (Red Hat) and I'm currently typing this on a ThinkPad running 12.04... When I put in the live cd, I boots, and I can get to the option menu to decide whether to install/run etc, but at any point beyond that I get only a single caret. I can type stuff in, but it goes no where. I've tried the usual stuff like running with nomodeset (thinking it was the intel HD400 graphics, but it is integrated graphics...) here is the setup: ASUS p8z77 pro (with the Atheros AR9485 wifi supposedly, but I'm not that far yet) i7 3370k 8gig X 2 G.Skill Crucial M4 (256 gig) LG Super-multi DVD re-writer no video card UPDATE: I though may be it was a bad image on the CD, so I downloaded another iso, and used a USB disk. now it boots to a blank screen. I can see the "press any key to get options" screen, but after that, it just goes to a blank screen.

  Read the article

• BURG broken by Windows

  - by Sallée

  I have successfully installed, using Super Boot Manager, BURG in a computer at my work. After I boot into Windows XP, BURG is no longer operational. The machine just boots to the BIOS screen, goes black, and then boots to the BIOS screen again ad infinitum. The only way to recover I have found so far is to use a Boot-Repair USB, which restores either GRUB2 or MBR, not BURG. Everything works fine under GRUB2, but I prefer the improved look of BURG to make things easier on my students.

  Read the article

• Grub can't find device on boot resulting in Grub Rescue

  - by user1160163

  So I have 2 hard drives a HDD 320GB and a SSD 20GB. Before I had Windows 7 on the HDD and Ubuntu on the SSD but wanted to get rid of windows and reinstall a clean Ubuntu on the SSD then use the HDD for storage. So I deleted everything from the HDD and set up the SSD with 18GB ext4 and 2GB Swap and installed Ubuntu on the 18GB ext4. Though now when I boot up I get "Error: No such device Grub Rescue" I have a live USB and I ran the Boot Repair following these instructions - grub rescue after install of Ubuntu 12.04 (dual boot) - it says successful though still have the same problem. This is the given URL from Boot Repair - http://paste.ubuntu.com/1257988/ Thanks for any help given.

  Read the article

• grub rescue: grub not installed

  - by linda8

  I tried to install beside my windows 7. It didn't work. After installing it could not find the root directory and I got some other error messages... I just wanted my computer to be faster again so instead I decided to reinstall windows from recovery disk. It formatted the disk and installed windows again. The hard-disk has msdos structure now and the ubuntu partition is empty When I start up the computer grab is starting up an I get a grab rescue problem, but grab is no longer installed. How can I boot directly into windows? i can boot Ubuntu from an usb stick but I'm not able to install it anymore. I just want windows to work again... I'm hoping for advice... Linda

  Read the article

• After installing Windows XP I can't boot into Ubuntu 12.04 LTS

  - by Osama

  I know that this issue may have been happened to many people and answered many times. For some reason, I had to install Windows XP beside Ubuntu 12.04 LTS. Once I did that, I'm no longer able to log on to my Ubuntu. The booting list screen doesn't show up. I tried some ways to fix that, one was to try Boot Repair (of course after opening Ubuntu live from a USB), however, the program didn't open after the installation had finished !! So how can I fix that? I hope you guys stick a little with my problem until it is solved

  Read the article

• Command line option to check which filesystem I am using?

  - by j-g-faustus

  Is there a command that will show which file system (ext3, ext4, FAT32, ...) the various partitions and disks are using? Similar to how sudo fdisk -l lists information about disks and partitions? Update Accepted the "mount" answer as mount works without specifying filesystem type (commenting out the relevant entries in fstab, if any): $ sudo mount /dev/sdf1 /mnt/tmp $ mount | grep /mnt/tmp /dev/sdf1 on /mnt/tmp type ext3 (rw) Found another option in ubuntuforums - blkid: # system disk $ sudo blkid /dev/sda1 /dev/sda1: UUID="...." TYPE="ext4" # USB disk: $ sudo blkid /dev/sdf1 /dev/sdf1: LABEL="backup" UUID="..." TYPE="ext3" # mdadm RAID: $ sudo blkid /dev/md0 /dev/md0: LABEL="raid" UUID="..." TYPE="ext4" Thanks for your help!

  Read the article

• Is the Lenovo Ideapad Z570 fully compatible with 12.04?

  - by umpirsky

  I'm looking for some notebook that will run on Ubuntu perfectly. I like LENOVO IdeaPad Z570, but I'm not sure how it will perform on Ubuntu. I heard people are complaining about wireless problems. Here is full configuraion: Processor Intel Core i5 2430M 2.4GHz - 3.0GHz Chipset Intel HM65 Express Memory 4GB DDR3 1333MHz Graphics NVIDIA GeForce GT 520M 1GB HDD 750GB SATA II Wireless 802.11b/g/n, Bluetooth 2.1 Network adapter Ethernet LAN 10/100Mbps Ports VGA, HDMI, 3x USB 2.0, eSATA Does anyone have experience with this model? Any problems noted? I heard there is a test suite, how can I install it? Maybe I can boot live CD and try it myself before buying it. But, unfortunately, sometimes something works on live CD, but not when you install it. I guess critical components here are graphics and wireless. Any feedback would be appreciated.

  Read the article

• Mass Transit Visualizations Reveal Cities’ Daily Movements [Video]

  - by Jason Fitzpatrick

  If you’re a sucker for data visualization–and we certainly are–this collection of mass transit data visualized over city maps are fascinating and makes mass transit look like a cell culture unfolding. Check out one day in the life of the New York City mass transit system in the video above and then hit up the link below to check out other cities including Chicago, Washington D.C., Boston, and Manchester. Mesmerizing Visualizations Show Mass-Transit Patterns of Major Cities [Wired] HTG Explains: Does Your Android Phone Need an Antivirus? How To Use USB Drives With the Nexus 7 and Other Android Devices Why Does 64-Bit Windows Need a Separate “Program Files (x86)” Folder?

  Read the article

• Change guest username

  - by Eelviny

  Now, looking around on Google shows me some ways in which to customise the settings of the Guest session. But, I would love a way to change the name of the Guest account. Basically, I'm planning to take some laptops out to a school in Africa and want to rename the "Guest" account in 14.04 to "Student" so the students use that. They tend to store stuff on USB sticks and they're using the Guest account so they can't break anything. EDIT: I'll expand on this slightly. They're using the guest account simply for the reason it doesn't save anything after logoff. This was a specific thing the teachers have asked for. I don't mind if the actual username remains guest behind the scenes, but as long as it shows up as Student to on Unity. Any way of going about this?

  Read the article

• Using an iPad or Nexus 7 as an Ubuntu Second Monitor

  - by never4getthis

  Is there any way to use an iPad mini or a Nexus 7 as a second monitor through a cable? I dont want something like vnc, I need it to work through the usb cable (or any other cable). I imagine that the iPad will get a lot of hate around here, the reason why I am considering it is because of the larger screen (compared to the nexus 7). I think its self explanatory that I need this to work with ubuntu (as I am posting in this formum). Thanks for reading this highly unorganized, typo-flled (<--see what I did there?), un-cohesive post. Any help will be appreciated!

  Read the article

< Previous Page | 362 363 364 365 366 367 368 369 370 371 372 373  | Next Page >