Search Results

Search found 10496 results on 420 pages for 'real yang'.

Page 367/420 | < Previous Page | 363 364 365 366 367 368 369 370 371 372 373 374  | Next Page >

• ASA and cisco vs NSA sonic firewall

  - by Lbaker101

  Currently I’m trying to structure our network to fully support and be redundant with BGP/Multi homing. Our current company size is 40 employees but the major part of that is our Development department. We are a software company and continued connection to the internet is a requirement as 90% of work stops when the net goes down. The only thing hosted on site (that needs to remain up) is our exchange server. Right now i'm faced with 2 different directions and was wondering if I could get your opinions on this. We will have 2 ISPs that are both 20meg up/down and dedicated fiber (so 40megs combined). This is handed off as an Ethernet cable into our server room. ISP#1 first digital ISP#2 CenturyLink we currently have 2x ASA5505s but the 2nd one is not in use. It was there to be a failover and it just needs the security+ license to be matched with the primary device. But this depends on the network structure. I have been looking into the hardware that would be required to be fully redundant and I found that we will either of the following. 2x Cisco 2921+ series routers with failover licenses. They will go in front of the ASAs and either connects in a failover state or 1 ISP into each of the 2921 series routers and then 1 line into each of the ASAs (thus all 4 hardware components will be used actively). So 2x Cisco 2921+ series routers 2x Cisco ASA5505 firewalls The other route 2x SonicWalls NSA2400MX series. 1 primary and the secondary will be in a failover state. This will remove the ASAs from the network and be about 2k cheaper than the cisco route. This also brings down the points of failure because it’s just the 2x sonicwalls It will also allow us to scale all the way up to 200-400 users (depending on their configuration). This also makes so the Sonic walls. So the real question is with the added functionality ect of the sonicwall is there a point in paying so much more to stay the cisco route? Thanks!

  Read the article

• Is it possible to change an "Unidentified Network" into a "Home" or "Work" network on Windows 7

  - by Rhys

  I have a problem with Windows 7 RC (7100). I frequently use a crossover network cable on WinXP with static IP addresses to connect to various industrial devices (e.g. robots, pumps, valves or even other Windows PCs) that have Ethernet network ports. When I do this on Windows 7, the network connection is classed as an "Unidentified Network" in Networks and Sharing Center and the public firewall profile is enforced by Windows. I do not want to change the public profile and would prefer to use the Home or Work profile instead. For other networks like Home and Work I'm able to click on them and change the classification. This is not available for unidentified networks. My questions are these:- Is there a way to manual override the "Unidentified Network" classification? What tests are performed on the network that fail, therefore classifying it as an "Unidentified Network" By googling (hitting mainly vista issues) it seems that you need to ensure that the default gateway is not 0.0.0.0. I've done this. I've also tried to remove IPv6 but this does not seem possible on Windows 7. UPDATE For those still having problems here is the answer to my issue and the possible reasons why:- Win7 keeps a list of the networks you visit by (I am assuming, but don’t know for sure) the MACID of the device pointed to by the Default Gateway. The default gateway is usually the constant device in a network (i.e. the NAT or router) so can be used to uniquely identify one network from another. The default gateway in the IPv4 properties panel must therefore point to an actual endpoint so windows can then keep track of it. If there is a device at the end of the Default Gateway windows will identify it and track it remembering its settings. The ways you can therefore fool Win7 is to either point the default gateway to your own IP address, or the IP address of the target device you’re communicating with. This will have the side effect of expecting that target device to start routing packets for IP destinations that are outside your subnet. So some applications on Win7 will try to communicate with the internet, these will be passed on to the default gateway (either back you the same IP address or a target device that is not a router) and thus will eventually timeout because neither can route packets. Which you can usually live with. This gets slightly complicated when you mix a this type of connection with a real connection to the internet via WIFI. The wired network card usually has priority when routing because of the “interface metric” so some applications might not connect correctly.

  Read the article

• Seeking (somewhat) better explanations about supporting > 2.1 TB hard drives.

  - by irrational John

  Today while Googling about I stumbled across posts claiming that Seagate plans to ship a 3TB drive sometime later in 2010. Unfortunately, the stuff I looked at all seemed to contain tidbits of info which I didn't think fit together properly. (I would link to some examples, but I'm only allowed 1 link per post at the moment). Now I really don't have any "need" to better understand the underlying tedious details of this. I am just curious. And confused. So ... some questions I'm hoping someone better informed than I might answer. The talk about a potential addressing problem in both the hardware and the software confused me. The assertion is that something called something called Long LBA addressing (LLBA) is needed in the Command Descriptor Block as a way to get around the current limits to access a hard drive bigger than ~2.1 (or ~2.2?) TB. OK, fine. But I thought the last time this problem came up it was solved by extending the length of the LBA field from 28 to 48 bits. (Remember this website? www.48bitlba.com) A 6 byte LBA is clearly large enough, so what's up with this LLBA talk. I thought this was all fixed back by Win XP SP2, if not sooner? And certainly all the hardware should be up to the task, shouldn't it? The real problem as I understand it with drives much bigger than 2 TB are the 4 byte LBA fields in the Master Boot Record (MBR) used to partition just about all hard drives at the moment. The most likely solution is to migrate to Intel's GUID Partition Table (GPT). A GPT uses 8 byte fields for the LBA. What I don't understand in this context is what is the problem with booting say Windows from a 3TB drive that uses a GPT. Granted, the current PC BIOS wouldn't know how to recognize or work with a GPT. But every GPT comes with a so-called "Safety" or "Guarding" MBR in sector 0.Apple already uses a hybrid version of the MBR to allow them to boot Windows on their Intel Macs (aka Boot Camp). Couldn't something similar be done to allow the PC BIOS to recognize and boot from a partition in, say, the first 1 GB of a 3GB or larger drive? I've got more questions such as where do 4K sectors fit into all of this. But it's probably time I just shut up and posted this. ;-) -irrational john

  Read the article

• Local Apache on Windows XP not finishing page requests

  - by asgeo1

  I have Apache 2.2.11 installed locally on my Windows XP (SP3) dev machine, which I setup about 3 months ago. I have just started having a strange problem in the last few week. Apache is serving some basic PHP applications like phpMyAdmin. When I make a page request, Apache appears to not finish serving all resources for that page. Firefox shows the "Transferring data from servername..." message, and the page never completes. The same problem happens in Internet Explorer too. I can sometimes tell which resource it is waiting on, because most of the page will render except for some image or similar resources. (Not sure why Firebug doesn't show this) It doesn't have the problem every page request - for page requests where most of the resources are cached in my browser, the page request will work with no problems. Or pages that are very light will work with no problems. However, if I "hard" refresh the page, I will have this problem (probably because it is requesting all page resources) Does anyone know what this could be? It is so strange that it has only just started happening - and I did not make any changes to my system (that I am aware of) I tried playing with the Apache ThreadsPerChild setting, but it did not seem to make a difference. UPDATE: I have been doing some more tests. I have been serving the most basic of pages, just a plain HTML file: <html> <body> <h1>testing</h1> </body> </html> If I request this page multiple times in a row, AND each request occurs immediately after the previous has completed, then 50% of the time the request will time out. However, if I put a 1-2 second gap between requests, then there is no problem. This correlates to what I have observed when the brower requests a real application page. When the browser has nothing cached, then all of the page resources are requested from the browser in a short amount of time - this appears to trigger the problem. UPDATE2: Nathan Long has helped me understand the issue a little better with the server-status page (see below). It is weird, it is like the server has a hickup sending data to the client. The client sits there waiting forever for data that never arrives. Closing the client process does not terminate the connection on the server - the server still has active threads for each previously attempted connection, but they just sit there - not sending any data and never terminating. (even though the client is now closed) Only a restart of the server seems to terminate them.

  Read the article

• Sharing folder in a Virtual Private Windows Server 2008 R2 ?

  - by Triztian

  See Edit 2: Hello all, seems my involvement with computers has grown and I've found my self in the need to access a shared folder on a server. I've read some documentation and managed to set up the folder as a share, for this I created a local group and for now just one local user that has access to the share, the folder is in the public user folder and it's permissions should be (and I believe they are) read/write. The problem is that I can't connect from a remote machine I mean I don't know how the way it should be accessed, the server has a public IP and we use it also as a host to our website I don't know if that affects it though, the folder will be used as the "keeper" for the QuickBooks company files and has the database server manager installed. I've tried setting up a VPN Connection to the but no success. The server has a domain name a "http://www.example.com" that redirects to our website, I am unsure if it could be accessed that way, also the share has a location displayed when I right-click properties Heres what I've tried Setting up a VPN Connection (Windows Vista and 7) Got to the point where I got asked for credential and entered the user I created (which is not an admin) but I got a "Connection fail error 800" I suppose this is because in the domain field I entered the servers workgroup. right-click add network connection (Windows 7) Went through the wizard until I reached the point of entering the location, tried many things, the name in the share's properties(\\SOMETHING\Share), the http://www.example.com , the IP address I'm quite unfamiliar with this, so I have my guesses: Since the group and user are local they do not have access to the folder. The firewall in the server is blocking my connection. Anyways, any help and guidence is truly appreciated. EDIT 1: As @tony roth pointed out it may be a security fail, an I commented it out to management and said that that is not an issue, so please bare with me. EDIT 2: I've found out that the real question could be streamlined to "Sharing folder in a Virtual Private Server?", as thats what we have, a virtual private windows server 2008 R2, and I would like to know how to make it show like a normal folder in the client computer. Thanks again for all of your support.

  Read the article

• Change Logon DPI setting in Windows 8.1

  - by jmc302005

  I love how M$ keeps making decisions for me about how I want my desktop to look. Now they have added per-user dpi settings. The problem this has created is that there is no adjustable dpi setting for the Lock/Logon screen. Let me explain. you can change the dpi setting to be the same across all displays and this does affect the icons and font on the lock/logon screen. However it does not affect any app/program that can run on the lock/logon screen. Ex. I use a 44" flat screen tv for my monitor on my desktop. Big enough for me to sit in my recliner and use my comp. But I don't have a wireless keyboard. And it sucks having the wire from the keyboard running across the floor. Plus I really don't want to keep a keyboard next to me. So I use the on screen keyboard for logging in and quick typing (search, web address, etc.) So the problem is that with the new dpi setup my on screen keyboard takes up nearly half the screen. Does M$ think we are all blind? Oh no I remember they think desktops should look like tablets and phones. I tried looking through the registry to see if I could find a setting for it. In the key HKEY_USERS.DEFAULT\Control Panel\Desktop there is a string value named "LogicalDPIOverride" with a value of -1. I have a feeling this is where I can fix the issue. I tried changing the value to 0 and to 1 with no change in the result. Instead I noticed that after logging out and back in the -1 value was back in the registry. So now M$ has also added a way for us to not be able to change a setting in the registry. They are making it harder and harder for us power users to be able to do anything with the settings in windows. Soon we will all have the same exact Windows with absolutely no customization. ok sorry for the quick rant. The real question here is. How can I change this defualt dpi crap? Can I use the LogPixels string that worked for dpi in Windows 7? Here are 2 Screen shots 1 of the Lock Screen and 1 of the Logon Screen http://i.imgur.com/6RM5ufE.jpg http://i.imgur.com/cnY5bmm.jpg Please any help will be appreciated.

  Read the article

• Linux Software RAID1 Rebuild Completes, but after reboot, its degraded again

  - by zimmy6996

  I have been beating my head with an issue here, and I'm now turning to the internet for help. I have a system running Mandrake Linux, with the following configuration: /dev/hda - This is a IDE drive. Has some partitions on it that boot the system and make up most of the file system. /dev/sda - This is drive 1 of 2 for a software raid /dev/md0 /dev/sdb - This is drive 2 of 2 for a software raid /dev/md0 md0 gets mounted but fstab as /data-storage, so it is not critical to the systems ability to boot. We can comment it out of fstab, and the system works just fine either way. The problem is, we have a failed sdb drive. So I shut the box down, and have pulled the failed disk and installed a new disk. When the system boots up, /proc/mdstat shows only sda as part of the raid. I then run the various command to rebuild the RAID to /dev/sdb. Everything rebuilds correctly, and upon completion, you look at /proc/mdstat and it shows 2 drives sda1(0) and sdb1(1). Everything looks great. Then you reboot the box ... UGH!!! Once rebooted, sdb is missing again from the RAID. It is like the rebuild never happened. I can walk through the commands to rebuild it again, and it will work, but again, after reboot, the box seems to make sdb just vanish! The real odd thing is, if after reboot, I pull sda out of the box, and try to get the system to load with the rebuilt sdb drive in the system, and when I do, the system actually throws and error just after grub, and says something about drive error, and the system has to shut down. Thoughts??? I'm starting to wonder if grub has something to do with this mess. That the drive isn't being setup within grub to be visible at boot? This RAID array isn't necessary for the system to boot, but when the replacement drive is in there, without SDA it won't boot system, so it makes me believe there is something to that. On top of that, there just seems to be something wonky here the drive falling off of RAID after reboot. I've hit the point of pounding my head on the keyboard. Any help would be greatly appreciated!!!

  Read the article

• Suggestions for splitting server roles amongst Hyper-V virtual servers / RAID6 or RAID10? / AppAssure

  - by Anon

  We have 2 Hyper-V hosts at present running 1 virtual server that was converted from a physical box running all roles. My plan is to split the roles over various virtual machines, upgrading to the latest software versions as I go, and use the backup server as a standby in case the main server fails. AppAssure backup software has a feature called Virtual Standby, so the VHD's can be ready to be fired up on the backup server if necessary. Off-site backups will be done via external USB drive for now. I'm just seeking some input/suggestions into how I'm planning to split the roles out amongst various virtual servers. Also, I'm curious how to setup the storage on the servers. We do not have any NAS's, SAN'S or any budget for this. What would the best RAID level be to use? I'm thinking either RAID6 (which is currently used) however I'm concerned about the write speeds, or RAID10 but again I'm worried that I can only lose 1 drive (from the same mirror) as opposed to any 2 with RAID6. I realise I have a hot swap for this, but what if a further drive fails during a rebuild? Is the write penalty of RAID6 worth the extra reliability over RAID10? Or will it be too slow with all the roles I am planning, therefore RAID10 is my only real option? The reason for the needed redundancy is I am the only technician and I'm not always on-site. Options I've considered: 1) 5 drives in RAID6 set, 200gb for host OS, rest for VM storage. 1 drive for hot swap - this is how it is currently setup 2) 4 drives in RAID10 set, 200gb for host OS, rest for VM storage. 2 drives for hot swap 3) 4 drives in RAID10 set for VM storage, 2 drives in RAID1 set for host OS. No drives for hot swap - While this is probably the best option with the amount of drives I have, I don't like the idea of having no hot swap 4) 3 drives in RAID6 set for VM storage, 2 drives in RAID1 set for host OS. 1 drive for hot swap All options give us enough storage capacity for our files, etc. We don't have any budget for extra drives or extra hot swap HD chassis for the servers. We have about 70 clients and about 150 users. MAIN SERVER Intel Xeon 5520 @ 2.27 GHz (2 processors) 16GB RAM 6 x 1TB Seagate Barracuda ES.2 Enterprise SATA drives Intel SRCSATAWB RAID controller Virtual machine workload using Hyper-V on Windows Server 2008 R2: DC01 - Active Directory Domain Controller / DNS server / Global catalog - 1GB RAM DC02 - Active Directory Domain Controller / DNS server / Global catalog - 1GB RAM Member Server - DHCP server, File server, Print server - 1GB RAM SCCM Member Server - 4GB RAM Third Party Software Member Server - A/V server, Ticketing software, etc - 4GB RAM Exchange 2007 - 4GB RAM - however we are probably migrating to a hosted solution, therefore freeing up resources BACKUP SERVER Intel Xeon E5410 @ 2.33GHz (2 processors) 16GB RAM 6 x 2TB WD RE4 SATA drives Intel SRCSASRB RAID controller Virtual machine workload using Hyper-V on Windows Server 2008 R2: AppAssure backup software - 8GB RAM

  Read the article

• How to encrypt dual boot windows 7 and xp (bitlocker, truecrypt combo?) on sdd (recommended?)

  - by therobyouknow

  I would like to setup a dual boot Windows 7 and Windows XP laptop/notebook computer where each operation system's partition is fully encrypted. I would like to do this on a SSD - a 128Gb Crucial M4. My research Dual boot of truecrypt encrypted OSs on one drive (not possible - in Truecript 7.x at time of writing) This cannot be done on a standard Truecrypt setup - it will only support encrypting one of the operating systems. I have tried this and also read about it here on superuser.com However, I did see a solution here that uses grub4dos as the initial bootloader to chain to separate truecrypt encrypted OSs, in my case Windows 7 and Windows XP: http://yyzyyz.blogspot.co.uk/2010/06/truecrypt-how-to-encrypt-multiple.html I am not going to consider this solution as it relies upon some custom code for use in the bootloader that is provided by the author. I would prefer a solution that can be fully understood so that I can be sure that there is nothing undesirable occuring (i.e. malware or just simply bugs in the code). I would like to believe such a solution doesn't have those risks but I can't be sure. BitLocker and Truecrypt combination - possible solution? So I am now considering a combination of encryption programs: I now aim to encrypt Windows XP with Truecrypt and Windows 7 with BitLocker. Assuming Truecrypt bootloader can boot into non-Truecrypt OSs (e.g. via hitting Escape to go to another menu), then this solution may be viable. SSDs and Encryption (use fastest possible spinning hard disk instead (?)) I read on various superuser.com posts and elsewhere that current SSDs are not suited to whole drive encryption for various reasons: impact of performance algorithms that give SSDs advantage over spinning harddisks. Algorithms used in compression of data for example. Wear on the SSD, shortening its life Security issues whereby data is repeated, as indicated in some Truecrypt documentation So I am now considering not using SSD. But with the aim to have the fastest drive possible, I am considering using the Western Digital Scorpion black 2.5" 7200rpm harddisk as this appears to be top rated among spinning platter-based harddrives (don't work for Western Digital). Summary So to achieve whole drive encrypted dual boot Windows 7 and Windows XP with minimal performance impact I intend to use a combination of Truecrypt and Bitlocker on a top-rated conventional spinning platter-based harddisk. Questions Will my summary: achieve whole disk encryption of the dual-boot Windows XP, Windows 7? OR an you suggest a simpler solution, including one that only requires only Truecrypt (BitLocker not available on XP). Or another encryption tool, including paid-for? provide the highest performance. Am I correct to avoid using SDD with encryption for the reasons I discovered? Are the concerns about SSDs and encryption still very real (some articles I read go back to 2010) Thanks for your input!

  Read the article

• Thinkpad speaker turns mute - Linux Codec issue?

  - by Curlew

  At some point a few days ago the speakers on my Lenovo Thinkpad T410 (Model number: 2537A11) suddenly stopped working randomly. This error happens every time I watch a video or listen to a music file. The sound just abruptly stops. At the moment, I can't produce a single sound no matter what I do. I am using Debian GNU/Linux on this laptop and there doesn't appear to be anything else wrong (the fan is working, no abnormal heat (staying around ~40°C), no other obvious errors or problems). Here is the output of a nice program someone pointed me to: martin@martin:~/Downloads$ sudo python run.py --monitor Using temporary directory: /dev/shm/hda-analyzer You may remove this directory when finished or if you like to download the most recent copy of hda-analyzer tool. Downloading file hda_analyzer.py Downloading file hda_guilib.py Downloading file hda_codec.py Downloading file hda_proc.py Downloading file hda_graph.py Downloading file hda_mixer.py Downloaded all files, executing hda_analyzer.py Watching 1 cards ====================================== Sound is working normally and then it stops and the following lines appear: Diff for codec 0/0 (0x14f15069): --- +++ @@ -164,17 +164,17 @@ Power: setting=D0, actual=D0 Node 0x1f [Pin Complex] wcaps 0x400501: Stereo Pincap 0x00000010: OUT Pin Default 0x901701f0: [Fixed] Speaker at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT - Power: setting=D0, actual=D0 + Power: setting=D3, actual=D3 Connection: 2 0x10* 0x11 Node 0x20 [Pin Complex] wcaps 0x400781: Stereo Digital Pincap 0x00000010: OUT Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE And now there is also an error in the dmesg output hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj. I changed the bdl_pos_adj to various numbers (-1, 0, 64, 1024) and either there is no change at all or dmesg reports that the adjustment is too big. I wonder if this bdl_pos_adj is the real reason for the error. Here is my hardware information provided by alsa-info.sh website. Okay, i did some serious testing and even installed Windows and now i officially conclude that this is a hard-ware related issue with my Laptop speakers. Reason: The error occurs in my installed Debian Linux, an Ubuntu Live distribution and Windows XP No error-message appears in all of the OS. The sound just keeps running and i can't hear a thing. I tested different setups, including OSS, ALSA and the pulseaudio server on top If i use my new usb-headphones i can hear sound all the time without any sudden silences. So obviously, although hard to believe, my laptop speakers are not okay (never heard of similar cases). I'll award the bounty to anyone who can point me to good tutorials or the procedure how to exchange my T410 speakers (i still have warranty. The laptop was bought in Germany, but now i am in Denmark). Or to someone who can explain me the output from hda-analyzer (big log above).

  Read the article

• HOW TO Convert DVD to iPad(Also converts to iPods)?

  - by goodm

  DVD to iPad Converter (Also converts to iPods) DVD to iPad Converter is the easiest-to-use and fastest DVD to iPad converter for Apple iPad movie and iPad video. It can convert almost any kind of DVD to iPad movie or iPad video format. It is also a powerful DVD to iPad converter with a conversion speed that is much faster than real-time. With this converter, you can use your iPad as a portable DVD player and enjoy your favorite DVDs on your iPad. http://www.softseeking.com/prodail.aspx?proid=83" Features of this DVD to iPad Converter Three Running Modes --In Direct Mode, you can directly click the DVD menu to select the movie you want to rip. This mode is very easy for ripping DVD movies. --In Batch Mode, you can select the DVD titles or chapters you want to rip via a checkbox list. This mode is very easy for batch ripping music DVDs, MTV DVDs and episodic DVDs. --In 1-Click Mode, you just need one click to open a DVD, after which the rest of the task will be done automatically. This is a “designed-for-dummies” mode. Input Types You can convert almost any kind of DVD format to iPad. Output Splitting You can split your output video by DVD chapters and titles. Fully supports MTV DVDs and episodic DVDs. File Size and Quality Adjustment You can customize the output file size and corresponding video quality. Flexible Output Profiles You can easily customize the various video settings such as brightness, bit rate, etc. Language Selection for Subtitles and Audio Track In Direct mode and in Batch mode, you can select the subtitle and audio track language. (In 1-Click mode, the default language is chosen automatically). Video Crop You can crop your video to 16:9, 4:3, full screen, etc. Video Resize You can resize your video. For example, you can set it to "Keep aspect ratio" or "Stretch to fit screen." Other Converts DVD to MP3 audio. Supports Dolby, DTS Surround audio track. Converts to the latest iPhone, 4th generation iPad nano, nano chromatic, 2nd generation iPad touch, and Apple TV.

  Read the article

• Mysql Servers for Attendance System

  - by foo

  I'm building an attendance system. There are about 20 places where people will check in and check out using Mifare 1K Card. It will use MySQL as the database. The system will display something like "#ID IN: 800AM" when the first time the user checks in and "#ID OUT: 400PM" when the user checks out. For this to work, all the databases need to be synchronized with each other all the times. For an example, if user A went to location #1 to check in but by the time he wants to return home, the server at location #1 went down, he needs to go to location #2 or the nearest server to check out. The server at location #2 should display '#ID OUT: 400PM" and not "#ID IN: 400PM" since he's already checked in. So, what should I use to ensure this idea will work? My main concern is with the network (other department manages it) which is very unpredictable. It just love to go down anytime it wants to. Update LOL, didn't realize my question is not clear, just noticed it when you guys pointed it out, sorry about that. My real question is, how can I configure my MySQL to be synchronized with each other (20 servers)? MySQL cluster ? (tried reading about it, but I'm not sure if it's the right thing to do) My current setup (first phase): Local database for each server OS: Slackware A main server that keeps track which staff is at which server A web based front end for the user to see their history (which connects to the server based on their records) Main Pros No worries about network problems since it is a local database Main Cons A user can only check in and out at the same server. Databases/Servers are not connected with each others. Have to add the user to each server if the users want to check in at different locations. Which means, if he wants to go to location A, he must be checked out from location A first and then check in at location B. The server at location B didn't know that the user has checked in before at A. By the way, I've already centralized my NTP to a local server. About the network, let's just say, I don't have the authority to make changes so that the network will be better. The network won't effect all 20 servers at once, usually, just a few of them for several times a week. If there are anything else you would like me to answer, please just ask.

  Read the article

• nginx timeout albeit ridicolous configuration

  - by Joa Ebert

  The scenario is an API server that should handle uploads. Posting on my.host.com/api/upload should do something with the body the client sends. However the API server has been designed to block the whole request until it fully processed the file, including some analysis which can take up to approx. 5min (...!). This has to change of course. In the meantime I wanted to setup nginx as a load balancer in front of the API servers. I quickly ran into a timeout issue, consulted Google and came up with this ridiculous test configuration: user www-data; worker_processes 4; error_log /var/log/nginx/error.log; pid /var/run/nginx.pid; events { worker_connections 1024; } http { include /etc/nginx/mime.types; access_log off; sendfile on; send_timeout 3600; keepalive_timeout 3600 120; tcp_nopush on; tcp_nodelay on; gzip off; client_header_timeout 3600; client_body_timeout 3600; proxy_send_timeout 3600; proxy_read_timeout 3600; proxy_connect_timeout 1800; proxy_next_upstream error; include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; } And upstream test { server host1; server host2; } server { listen 80; server_name my.host.com; client_max_body_size 10m; location /api/ { proxy_pass http://test; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $host; proxy_redirect off; } } Still, when an upload happens, I get the following result in the error.log: 2010/12/22 13:36:42 [error] 5256#0: *187359 upstream timed out (110: Connection timed out) while reading response header from upstream, client: xx.xx.xx.xx, server: my.host.com, request: "POST /api/upload HTTP/1.1", upstream: "http://apiserver:80/upload", host: "my.host.com" What else could I do? If I look at the log of the API server I still see that it is processing the request and analyzing the file. But I think 3600 seconds as a timeout should be more than enough. This happens even after a could of seconds. And I did a reload and force-reload of the configuration as well of course.

  Read the article

• nginx + Jetty - thousands of connections stuck in LAST_ACK

  - by virulence

  I have a FreeBSD machine with jails -- two in particular, one that runs nginx and another that runs a Java program that accepts requests via Jetty (embedded mode) Jetty receives upwards of 500 requests/sec constantly and there has been an issue lately where I will constantly have over 60,000 connections in the LAST_ACK state between nginx and jetty. Distribution of all connections (includes some other services, particularly php-fpm) root@host:/root # netstat -an > conns.txt root@host:/root # cat conns.txt | awk '{print $6}' | sort | uniq -c | sort -n 18 LISTEN 112 CLOSING 485 ESTABLISHED 650 FIN_WAIT_2 1425 FIN_WAIT_1 3301 TIME_WAIT 64215 LAST_ACK Distribution of nginx - jetty connections root@host:/root # cat conns.txt | grep '10.10.1.57' | awk '{print $6}' | sort | uniq -c | sort -n 1 3 CLOSE_WAIT 3 LISTEN 18 FIN_WAIT_2 125 ESTABLISHED 64193 LAST_ACK I'd prefer every request to fully close the connection. Clients requests are about 10 minutes apart from each other so connections must be closed. Some of the connections, tcp4 0 0 10.10.1.50.46809 10.10.1.57.9050 LAST_ACK tcp4 0 0 10.10.1.50.46805 10.10.1.57.9050 LAST_ACK tcp4 0 0 10.10.1.50.46797 10.10.1.57.9050 LAST_ACK tcp4 0 0 10.10.1.50.46794 10.10.1.57.9050 LAST_ACK tcp4 0 0 10.10.1.50.46790 10.10.1.57.9050 LAST_ACK tcp4 0 0 10.10.1.50.46789 10.10.1.57.9050 LAST_ACK tcp4 0 0 10.10.1.50.46771 10.10.1.57.9050 LAST_ACK etc.. On Jetty's end I've set maxIdleTime to 2000 -- before this all connections were in ESTABLISHED but they are now LAST_ACK On Jetty's end I've set Connection: close (i.e response.setHeader(HttpHeaders.CONNECTION, HttpHeaderValues.CLOSE);) Jetty never reports a lot of open connections -- always very few. PF/IPFW is not currently being used nginx - reset_timedout_connection is on I cannot figure out how to get nginx or jetty to forcibly close the connection, is this simply something that needs to be fixed in Jetty so that it fully closes the socket after the request finishes? Thanks a lot in advance EDIT: forgot my nginx config for the proxy setup- proxy_pass http://10.10.1.57:9050; proxy_set_header HTTP_X_GEOIP $http_x_geoip; proxy_set_header GEOIP_COUNTRY_CODE $geoip_country_code; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_set_header Connection ""; proxy_http_version 1.1; EDIT2: Forcing Jetty to close the connection via request.getConnection().getEndPoint().close() does nothing -- it's obvious the connection IS being closed (as it's in LAST_ACK) but why isn't it getting past this? Is Nginx keeping the connection open to the backend for some reason?

  Read the article

• Vista stuck at "Shutting down..." screen. Any way to get verbose logging?

  - by CapBBeard

  Hi all, My home machine has been running fine for about 3 years, no problems at all. Within the last couple of weeks it's had real trouble trying to shut down. It'll get so far and then just sit there at the "Shutting down..." screen for hours. I've left it overnight, I've tried in safe mode, all to no avail. These days, I just wait for the disk activity to finish up and then hold the power button to turn it off. Feels dirty as, especially because there's a RAID involved! The hardware itself is in pretty good shape and of decent spec; Core 2 Quad, 4GB RAM, 1TB RAID 1+0, so it's not quite like a 7 year old PC coming to end of life! In the last month, hardware hasn't changed except for a new monitor. Admittedly I haven't tried unplugging the monitor but I've never heard of that preventing a shutdown. I might give it a whirl later I guess, as a last resort. I've uninstalled old apps, done updates, checked the event log, looked in device manager, uninstalled all non-present devices, disabled various non-critical devices (imaging, audio etc), unplugged peripherals, stopped non-essential services, unplugged the network, disabled the network adapter entirely, ran chkdsk, verified my RAID, the list goes on. But not a single lead. I'm pretty stumped. It could be hardware, but I have no other evidence to suggest so; when the PC is running, it runs fine. Temperatures are good, gaming is smooth as always, disk performance is fine. Event log even makes it look like the shutdown was completed (gets to the point where the event log service stops). In fact, the PC doesn't appear to realise that I cut the power to it. So my question is, does anyone know if there is a way I can get some verbose output (or a log) from shutdown to give me some idea of what is causing the issue? I'm guessing it's stuck unloading some app/driver but it would be good to get some specifics! Unless anyone has any other ideas? I suspect a reinstall would resolve the issue, however I'm looking to get a new PC built in the next month or so, and the reinstall is going to be quite a big job so I'd rather just wait until then if it comes to that. Would still be nice to get this sorted in the mean time though. Cheers!

  Read the article

• Should use EXT4 or XFS to be able to 'sync'/backup to S3?

  - by Rafa

  It's my first message here, so bear with me... (I have already checked quite a few of the "Related Questions" suggested by the editor) Here's the setup, a brand new dedicated server (8GB RAM, some 140+ GB disk, Raid 1 via HW controller, 15000 RPM) it's a production web server (with MySQL in it, too, not just serving web requests); not a personal desktop computer or similar. Ubuntu Server 64bit 10.04 LTS We have an Amazon EC2+EBS setup with the EBS volume formatted as XFS for easily taking snapshots to S3, via AWS' console. We are now migrating to the dedicated server and I want to be able to backup our data to Amazon's S3. The main reason being the possibility of using the latest snapshot from an EC2 instance in case of hardware failure on the dedicated server. There are two approaches I am thinking of: do a "simple" file-based backup with rsync, dumping the database' and other files, and uploading to amazon via S3 API commands, or to an EC2 instance, or something. do a file-system "freeze" (using XFS) with the usual ebs/ec2 snapshot tool to take part of the file system, take a snapshot, and upload it to Amazon. Here's my question (or series of questions): Can I safely use XFS for the whole system as the main and only format on the dedicated server? If not, is it safe to use EXT4? Or should I use something else? would then be possible to make snapshots of the system to upload to Amazon? Is it possible/feasible/practical to do what I want to do, anyway? any recommendations? When searching around for S3/EBS/XFS, anything relevant to my problem is usually focused on taking snapshots of a XFS system that is already an EBS volume. My intention is to do it in a "real"/metal dedicated server. Update: I just saw this on Wikipedia: XFS does not provide direct support for snapshots, as it expects the snapshot process to be implemented by the volume manager. I had always assumed that I could choose 2 ways of doing snapshots: via LVM or via XFS (without LVM). After reading this, I realize these 2 options are more like it: With XFS: 1) do xfs_freeze; 2) copy the frozen files via, eg, rsync; 3) unfreeze xfs With LVM and XFS: 1) do xfs_freeze; 2) make a binary copy of the frozen fs via lvcreate and related commands; 3) unfreeze xfs; 4) somehow backup the LVM snapshot. Thanks a lot in advance, Let me know if I need to clarify something.

  Read the article

• Help needed setting up nginx to serve static files.

  - by Catalina

  Hi Guys, I'm trying to setup nginx to serve static files. Basically all I need is to have http://mydomain.com/site_media/ point to /var/django/myproject/site_media. I have tried so many configurations and when I test it I always get a 404 error for static files. Can anyone please tell me what I'm doing wrong or how I should be setting this up? This is my current nginx configuration file. user www-data; worker_processes 1; #error_log /usr/local/nginx/logs/error.log; #pid /usr/local/nginx/logs/nginx.pid; events { worker_connections 1024; use epoll; } http { # Enumerate all the Tornado servers here upstream frontends { server 127.0.0.1:8000; server 127.0.0.1:8001; server 127.0.0.1:8002; server 127.0.0.1:8003; } include mime.types; default_type application/octet-stream; #access_log /usr/local/nginx/logs/access.log; keepalive_timeout 65; proxy_read_timeout 200; sendfile on; tcp_nopush on; tcp_nodelay on; gzip on; gzip_min_length 1000; gzip_proxied any; gzip_types text/plain text/html text/css text/xml application/x-javascript application/xml application/atom+xml text/javascript; proxy_next_upstream error; server { listen 80; # Allow file uploads client_max_body_size 50M; location ^~ /site_media/ { root /var/django/myproject/site_media; if ($query_string) { expires max; } } location = /favicon.ico { rewrite (.*) /site_media/favicon.ico; } location = /robots.txt { rewrite (.*) /site_media/robots.txt; } location / { proxy_pass_header Server; proxy_set_header Host $http_host; proxy_redirect off; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Scheme $scheme; proxy_pass http://frontends; } } #include /usr/local/nginx/sites-enabled/*; } Thanks, Cata

  Read the article

• Fix single entry from mbr

  - by Sander

  I use EasyBCD to manage my tripleboot of (1) Windows Server 2008 R2, (2) Windows 7 Professional and (3) Ubuntu Linux. While trying to change the order of my boot menu I ended up losing the Windows Server entry. Luckily I had a boot menu backup (.bcd file) that allowed me to restore my boot menu using EasyBCD. However, when I now select the Windows Server option in my boot menu the Windows Server Recovery Environment starts up. So I have to select language/keyboard layout/etc. and then I have 3 options as shown in the image below. . My goal is to fix the one corrupted Windows Server entry from my boot menu without messing up or losing the two other ones. I'm guessing the Recovery Console (Command Prompt) is the next step and that I will be needing bootrec.exe. But when consulting this page: Use the Bootrec.exe tool in the Windows Recovery Environment to troubleshoot and repair startup issues in Windows (about half way down there's a link that shows the bootrec.exe options) I'm getting uncertain. The page lists 4 options for bootrec.exe : /FixMbr /FixBoot /ScanOs /RebuildBcd What option do I need to fix just the server entry of my boot menu? Thanks in advance, Sander P.S. All three OS's are on the same physical disk (3 different partitions). Disk layout: System reserved (primary partition, 100 MB) Windows 7 (primary parition, 150 GB) Windows Server 2008 (primary partition, 150 GB) Extended partition (linux partitions (/,/swap,/home), 150GB + data partition, 150 GB) P.P.S. This is what my boot menu looks like using EasyBCD (Detailed/Debug mode) on my Windows 7 installation. Windows Boot Manager -------------------- identifier {9dea862c-5cdd-4e70-acc1-f32b344d4795} device partition=\Device\HarddiskVolume1 description Windows Boot Manager locale en-US inherit {7ea2e1ac-2e61-4728-aaa3-896d9d0a9f0e} default {93f90e43-cae8-11df-b05a-c9177e705936} resumeobject {93f90e3e-cae8-11df-b05a-c9177e705936} displayorder {93f90e43-cae8-11df-b05a-c9177e705936} {93f90e3f-cae8-11df-b05a-c9177e705936} {93f90e46-cae8-11df-b05a-c9177e705936} toolsdisplayorder {b2721d73-1db4-4c62-bf78-c548a880142d} timeout 10 displaybootmenu Yes Windows Boot Loader ------------------- identifier {93f90e43-cae8-11df-b05a-c9177e705936} device partition=\Device\HarddiskVolume3 path \Windows\system32\winload.exe description Windows Server 2008 R2 - Standard locale en-US inherit {6efb52bf-1766-41db-a6b3-0ee5eff72bd7} recoverysequence {93f90e44-cae8-11df-b05a-c9177e705936} recoveryenabled Yes osdevice partition=\Device\HarddiskVolume3 systemroot \Windows resumeobject {93f90e42-cae8-11df-b05a-c9177e705936} nx OptOut Windows Boot Loader ------------------- identifier {93f90e3f-cae8-11df-b05a-c9177e705936} device partition=C: path \Windows\system32\winload.exe description Windows 7 - Professional locale nl-NL inherit {6efb52bf-1766-41db-a6b3-0ee5eff72bd7} recoverysequence {93f90e40-cae8-11df-b05a-c9177e705936} recoveryenabled Yes osdevice partition=C: systemroot \Windows resumeobject {93f90e3e-cae8-11df-b05a-c9177e705936} nx OptIn Real-mode Boot Sector --------------------- identifier {93f90e46-cae8-11df-b05a-c9177e705936} device partition=C: path \NST\AutoNeoGrub0.mbr description Ubuntu 10.04 - Lucid Lynx

  Read the article

• Too many Tunnel Adapter Interfaces

  - by Tomas Lycken

  If I open a command prompt on my machine and type ipconfig /all, I see lots of Tunnel adapter Local Area Connection* 9: Media state . . . . . . . . . . . . . : Media disconnected Connection-specific DNS Sufficx . . . : Description . . . . . . . . . . . . . : Microsoft 6to4 Adapter #5 Physical address. . . . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . . . : No Autoconfiguration Enabled . . . . . . : Yes In fact, they're so many that my "real" adapters are pushed out of the stack, and can't be seen anymore. Is there any flag I can use on ipconfig to hide all virtual interfaces? Or is there some other way around this problem? Since they always say "Media disconnected" I suppose disabling could be an option, but if possible I'd rather not turn any functionality off. I just want to control what output I get from ipconfig. Also, I know these are related to IPv6 stuff. However, most of what I find on google merely states what these are, and that they're harmless - nothing about hiding/removing them.

  Read the article

• Htaccess strange behaviour with Nginx

  - by Termos

  I have a site running on Nginx (v1.0.14) serving as reverse proxy which proxies requests to Apache (v2.2.19). So Nginx runs on port 80, Apache is on 8080. Overall site works fine except that i cannot block access to certain directories with .htaccess file. For example i have 'my-protected-directory' on 'www.site.com' Inside it i have htaccess with following code: <Files *> order deny,allow deny from all allow from 1.2.3.4 <--- my ip address here </Files> When i try to access this page with my ip (1.2.3.4) i get 404 error which is not what i expect: http://www.site.com/my-protected-directory However everything works as expected when this page is served directly by Apache. I can see this page, everyone else can't. http://www.site.com:8080/my-protected-directory Update. Nginx config (7.1.3.7 is site ip.): user apache; worker_processes 4; error_log logs/error.log; pid logs/nginx.pid; events { worker_connections 1024; } http { include mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; sendfile on; keepalive_timeout 65; gzip on; gzip_min_length 1024; gzip_http_version 1.1; gzip_proxied any; gzip_comp_level 5; gzip_types text/plain text/css application/x-javascript text/xml application/xml application/xml+rss text/javascript image/x-icon; server { listen 80; server_name www.site.com site.com 7.1.3.7; access_log logs/host.access.log main; # serve static files location ~* ^.+.(jpg|jpeg|gif|png|ico|css|zip|tgz|gz|rar|bz2|doc|xls|exe|pdf|ppt|txt|tar|mid|midi|wav|bmp|rtf|js)$ { root /var/www/vhosts/www.site.com/httpdocs; proxy_set_header Range ""; expires 30d; } # pass requests for dynamic content to Apache location / { proxy_redirect off; proxy_set_header X-Real-IP $remote_addr; proxy_set_header Host $http_host; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Range ""; proxy_pass http://7.1.3.7:8080; } } Could please anyone tell me what is wrong and how this can be fixed ?

  Read the article

• VPN Connection Causes Internal LAN Connection Loss with Server

  - by sleepisfortheweak

  I've tried configuring basic PPTP VPN at my small business using a number of different tutorials. As far as I can tell, the actual VPN connection worked fine, but upon connecting a client, the Server 'disappears' from the internal LAN. The RRAS service must be stopped before the connection is restored. My Setup: The network is simply a DSL Gateway/Router to the outside functioning as NAT/Firewall/DHCP. The server is a Win Server 2008 machine at fixed IP 192.168.1.200. The server has 1 NIC, so I used the 'custom' option when configuring RRAS. The RRAS settings should be default except that I've disabled ports for connection types I'm not using and reduced PPTP ports to 10. I've also created an address pool and disabled DHCP packet forwarding. The server only functions as a File Share and now a VPN Server. Local LAN computers all have mapped network shares to the server authenticated based on Local User/Group setup on the server. The Problem: The moment a client connects through VPN, the server 'disappears' from the local network. All mapped drives disconnect and there is no response to a ping 192.168.1.200. Even if the client disconnects, the server does not re-appear at that address until the RRAS service is stopped. I've Tried: Using an Address Pool inside and outside the local subnet. Using DCHP Relay Checking Inbound/Outbound filters (none enabled) The fact that nothing I've tried has had any effect, and that I can connect and successfully obtain an IP tells me that it's something more fundamental I'm missing. My gut tells me that it's something to do with the second IP address added by the VPN client somehow taking over the interface or traffic from the local LAN accidently getting routed to the VPN client instead of handled at the server once RRAS has become 'active' when a client connects. Hopefully this may be obvious to someone with real IT experience. I've been doing this a while and almost never been stumped. I'm starting to think it might actually be something tricky since my setup is pretty basic yet refuses to work. I'll be happy to include more info if this doesn't ring any bells right away for anyone. Thanks

  Read the article

• Got Hacked. Want to understand how.

  - by gaoshan88

  Someone has, for the second time, appended a chunk of javascript to a site I help run. This javascript hijacks Google adsense, inserting their own account number, and sticking ads all over. The code is always appended, always in one specific directory (one used by a third party ad program), affects a number of files in a number of directories inside this one ad dir (20 or so) and is inserted at roughly the same overnight time. The adsense account belongs to a Chinese website (located in a town not an hour from where I will be in China next month. Maybe I should go bust heads... kidding, sort of), btw... here is the info on the site: http://serversiders.com/fhr.com.cn So, how could they append text to these files? Is it related to the permissions set on the files (ranging from 755 to 644)? To the webserver user (it's on MediaTemple so it should be secure, yes?)? I mean, if you have a file that has permissions set to 777 I still can't just add code to it at will... how might they be doing this? Here is a sample of the actual code for your viewing pleasure (and as you can see... not much to it. The real trick is how they got it in there): <script type="text/javascript"><!-- google_ad_client = "pub-5465156513898836"; /* 728x90_as */ google_ad_slot = "4840387765"; google_ad_width = 728; google_ad_height = 90; //--> </script> <script type="text/javascript" src="http://pagead2.googlesyndication.com/pagead/show_ads.js"> </script> Since a number of folks have mentioned it, here is what I have checked (and by checked I mean I looked around the time the files were modified for any weirdness and I grepped the files for POST statements and directory traversals: access_log (nothing around the time except normal (i.e. excessive) msn bot traffic) error_log (nothing but the usual file does not exist errors for innocuous looking files) ssl_log (nothing but the usual) messages_log (no FTP access in here except for me)

  Read the article

• LdapErr: DSID-0C0903AA, data 52e: authenticating against AD '08 with pam_ldap

  - by Stefan M

  I have full admin access to the AD '08 server I'm trying to authenticate towards. The error code means invalid credentials, but I wish this was as simple as me typing in the wrong password. First of all, I have a working Apache mod_ldap configuration against the same domain. AuthType basic AuthName "MYDOMAIN" AuthBasicProvider ldap AuthLDAPUrl "ldap://10.220.100.10/OU=Companies,MYCOMPANY,DC=southit,DC=inet?sAMAccountName?sub?(objectClass=user)" AuthLDAPBindDN svc_webaccess_auth AuthLDAPBindPassword mySvcWebAccessPassword Require ldap-group CN=Service_WebAccess,OU=Groups,OU=MYCOMPANY,DC=southit,DC=inet I'm showing this because it works without the use of any Kerberos, as so many other guides out there recommend for system authentication to AD. Now I want to translate this into pam_ldap.conf for use with OpenSSH. The /etc/pam.d/common-auth part is simple. auth sufficient pam_ldap.so debug This line is processed before any other. I believe the real issue is configuring pam_ldap.conf. host 10.220.100.10 base OU=Companies,MYCOMPANY,DC=southit,DC=inet ldap_version 3 binddn svc_webaccess_auth bindpw mySvcWebAccessPassword scope sub timelimit 30 pam_filter objectclass=User nss_map_attribute uid sAMAccountName pam_login_attribute sAMAccountName pam_password ad Now I've been monitoring ldap traffic on the AD host using wireshark. I've captured a successful session from Apache's mod_ldap and compared it to a failed session from pam_ldap. The first bindrequest is a success using the svc_webaccess_auth account, the searchrequest is a success and returns a result of 1. The last bindrequest using my user is a failure and returns the above error code. Everything looks identical except for this one line in the filter for the searchrequest, here showing mod_ldap. Filter: (&(objectClass=user)(sAMAccountName=ivasta)) The second one is pam_ldap. Filter: (&(&(objectclass=User)(objectclass=User))(sAMAccountName=ivasta)) My user is named ivasta. However, the searchrequest does not return failure, it does return 1 result. I've also tried this with ldapsearch on the cli. It's the bindrequest that follows the searchrequest that fails with the above error code 52e. Here is the failure message of the final bindrequest. resultcode: invalidcredentials (49) 80090308: LdapErr: DSID-0C0903AA, comment: AcceptSecurityContext error, data 52e, v1772 This should mean invalid password but I've tried with other users and with very simple passwords. Does anyone recognize this from their own struggles with pam_ldap and AD? Edit: Worth noting is that I've also tried pam_password crypt, and pam_filter sAMAccountName=User because this worked when using ldapsearch. ldapsearch -LLL -h 10.220.100.10 -x -b "ou=Users,ou=mycompany,dc=southit,dc=inet" -v -s sub -D svc_webaccess_auth -W '(sAMAccountName=ivasta)' This works using the svc_webaccess_auth account password. This account has scan access to that OU for use with apache's mod_ldap.

  Read the article

• Problem with several USB devices on Windows XP. How to diagnose USB device?

  - by Lukasz Baran

  Hello All, Recently I've bought some electronic devices (like e.g. Sony Ebook reader PRS-600 or HP PDA IPaq) which are connected to PC using USB ports. These devices have own batteries and they are recharged using USB. However, I am experiencing a problem with Ebook Reader and the similiar thing happens with my PDA (but in this case it's more rare). Sometimes, I am unable to make it start recharging, when it's connected to USB port. The LCD diode on my Reader lights up and the icon in the system tray appears. They both indicate that the device has been connected. However, the device should start recharching and it should appear on Windows XP as a 'explorable' device (just like pendrive it offers some HDDs). None of these happens:( This problem appears on two PCs - desktop and laptop. Both have Windows XP SP3 installed. And what's interesting and surprising to me is the fact that these devices sometimes work without any problems. I mean, I just plug them in and they work properly. Besides that, there are some computers (I have tested a variety of possible conditions) on which the problem does not appear! I am confused and, on the other hand, determined to find out what is the real cause of such strange behavior. Maybe I'm wrong but I always assumed that I'm using deterministic machines, but the described situation makes me feel like I was dreaming:) And that's why I'm asking you here. Are there any tools that could help me diagnose USB ports? Or maybe anyone knows the solution? I have a lot experience with low level programming (mostly from the times of MS-DOS applications), but I'm not an expert when it comes to WinXP technology. If this was a problem with network connection, I would know what to do - I know how to track network traffic, but with USB ports I feel powerless. I have a feeling that the problem may lie in a way WinXP handles USB devices. Personally, I hate auto-discovery and P'n'P features available in Windows. I know that some of may suggest to move to Linux or other *Nix system. Unfortunately, I have to use WinXP in my professional life, so it's rather impossible. Besides that, I don't consider XP as a total disaster. Any help from you will be appreciated!

  Read the article

• Thunderbird 3: can't change column width?

  - by rumtscho

  I recently installed Thunderbird 3.0.3. Just noticed a suboptimal UI setting: in the upper pane, which lists the e-mails in the current folder, the Date column is about 200px wide. So when I keep the window at 480x600, all I see in a row is: | tree icon | favourites icon | attachment icon | read icon | junk icon | Date and time, followed by 5cm whitespace | ... | P Where "P" is the first letter of the name of the sender. And the "..." is actually shown this way, I have no idea which column it is meant to be. But I don't see neither the sender, nor the message subject, which makes scrolling a folder for a certain mail rather pointless. I see these when I maximize the window, actually the columns are then not only bigger, they are arranged in another sequence. But I feel that holding a mail client permanently maximised at 1600x1200 is a waste of screen real estate. My naive solution attempt was to try to go with the mouse cursor to the right edge of the date column and try to shrink it by moving the cursor left while holding down the left mouse button. Not only is this default behaviour for all resizable columns I've ever encountered in GUIs, the cursor actually turns into a horizontal double-headed arrow. But pulling has no effect at all. I cannot make a wide column narrow, and I cannot make the narrow columns wide. I didn't find anything in the preferences either. So can please somebody explain how to get the columns arranged sensibly? Edit: I found out that I only have the problem when I drag the Thunderbird window to a GridMove screen area. It gets automatically resized, but doesn't notice the resize event or something, so the column width remains the same as under a maximized window. First making the window narrow using the mouse helps with column width, but the width of the mail pane is still too wide (rows don't reflow). Anyway, this seems to be a bug caused by the combination of the two applications and not a configuration problem, so I guess I'll have to live with it.

  Read the article

< Previous Page | 363 364 365 366 367 368 369 370 371 372 373 374  | Next Page >