Search Results

Search found 17063 results on 683 pages for 'window restore'.

Page 367/683 | < Previous Page | 363 364 365 366 367 368 369 370 371 372 373 374  | Next Page >

• I used disk copy to clone my drive, now my windows 7 profile won't load correctly

  - by RzK

  I used easeuse disk copy, after acronis, clonezilla, windows image restore failed me. Basically it copys all sectors, I set it to skip bad sectors(40). The source drive works, it just gave me a couple errors and stopped booting at one point. The drive is an identical copy, minus 40 bad errors. The drive is set to C and active partition, I rebuilt the boot order. I've ran sfc /scannow and ran chkdsk /r chkdsk found 20kb of bad sectors if I remember right. Now the issue I get is when I log into my profile which was saved right, I get a blank light blue wallpaper (non-license) explorer.exe is not running, and there are only 4 processes running in taskmanager, including taskmanager. I would try a repair install but CRTL-E would not open, nothing will open once I force start explorer.exe, almost like all services are down. What should I do? Fresh install is almost not a possibility I will try and fix this issue. sfc /scannow /offbootdir=c:\ /offwindir=c:\windows returns "Windows Resource Protection could not perform the requested operation"

  Read the article

• Issues installing new drivers

  - by Luke

  I have a Windows XP Home SP3 system that won't detect anything on USB. It works on Ubuntu Live (off USB), and the USB keyboard and mouse work in the BIOS. Physically speaking, I'm sure it's fine. I installed the SMBus drivers and the USB driver from the motherboard's website, adn that went fine. If I plug anything in, it can detect the type of thing it is (i.e. keyboard, mouse, flash drive, etc) and even the name sometimes (i.e. Microsoft 5 button mouse), but won't accept any drivers. I have tried putting the Windows CD in the drive, but that didn't help. I have scanned for viruses and CHKDSK with no issues, and ran a MemTest86 with no issues. I am limited to one PS/2 connection for inputs, so I'm using the keyboard and haven't tried WU yet. A colleague suggested trying a new USB controller, so I put in a PCI one that only had drivers for 9x on the CD, so I assume that XP has them built in. It goes through the Found New Hardware wizard, but never actually finds drivers. I have also tried running SFC /SCANNOW and System Restore. SFC just flashes and goes away, making me believe it may be a hidden virus somewhere, but everything else seems to work, including MSE. I have reason to believe it's just an issue with detecting hardware, since even the USB Controller card can't seem to find drivers, but it can detect WHEN a USB device is connected Anyone else run into this, or have a suggestion short of re-installing Windows?

  Read the article

• Remote Debug Windows Azure Cloud Service

  - by Shaun

  Originally posted on: http://geekswithblogs.net/shaunxu/archive/2013/11/02/remote-debug-windows-azure-cloud-service.aspxOn the 22nd of October Microsoft Announced the new Windows Azure SDK 2.2. It introduced a lot of cool features but one of it shocked most, which is the remote debug support for Windows Azure Cloud Service (a.k.a. WACS).   Live Debug is Nightmare for Cloud Application When we are developing against public cloud, debug might be the most difficult task, especially after the application had been deployed. In order to minimize the debug effort, Microsoft provided local emulator for cloud service and storage once the Windows Azure platform was announced. By using local emulator developers could be able run their application on local machine with almost the same behavior as running on Windows Azure, and that could be debug easily and quickly. But when we deployed our application to Azure, we have to use log, diagnostic monitor to debug, which is very low efficient. Visual Studio 2012 introduced a new feature named "anonymous remote debug" which allows any workstation under any user could be able to attach the remote process. This is less secure comparing the authenticated remote debug but much easier and simpler to use. Now in Windows Azure SDK 2.2, we could be able to attach our application from our local machine to Windows Azure, and it's very easy.   How to Use Remote Debugger First, let's create a new Windows Azure Cloud Project in Visual Studio and selected ASP.NET Web Role. Then create an ASP.NET WebForm application. Then right click on the cloud project and select "publish". In the publish dialog we need to make sure the application will be built in debug mode, since .NET assembly cannot be debugged in release mode. I enabled Remote Desktop as I will log into the virtual machine later in this post. It's NOT necessary for remote debug. And selected "advanced settings" tab, make sure we checked "Enable Remote Debugger for all roles". In WACS, a cloud service could be able to have one or more roles and each role could be able to have one or more instances. The remote debugger will be enabled for all roles and all instances if we checked. Currently there's no way for us to specify which role(s) and which instance(s) to enable. Finally click "publish" button. In the windows azure activity window in Visual Studio we can find some information about remote debugger. To attache remote process would be easy. Open the "server explorer" window in Visual Studio and expand "cloud services" node, find the cloud service, role and instance we had just published and wanted to debug, right click on the instance and select "attach debugger". Then after a while (it's based on how fast our Internet connect to Windows Azure Data Center) the Visual Studio will be switched to debug mode. Let's add a breakpoint in the default web page's form load function and refresh the page in browser to see what's happen. We can see that the our application was stopped at the breakpoint. The call stack, watch features are all available to use. Now let's hit F5 to continue the step, then back to the browser we will find the page was rendered successfully.   What Under the Hood Remote debugger is a WACS plugin. When we checked the "enable remote debugger" in the publish dialog, Visual Studio will add two cloud configuration settings in the CSCFG file. Since they were appended when deployment, we cannot find in our project's CSCFG file. But if we opened the publish package we could find as below. At the same time, Visual Studio will generate a certificate and included into the package for remote debugger. If we went to the azure management portal we will find there will a certificate under our application which was created, uploaded by remote debugger plugin. Since I enabled Remote Desktop there will be two certificates in the screenshot below. The other one is for remote debugger. When our application was deployed, windows azure system will open related ports for remote debugger. As below you can see there are two new ports opened on my application. Finally, in our WACS virtual machine, windows azure system will copy the remote debug component based on which version of Visual Studio we are using and start. Our application then can be debugged remotely through the visual studio remote debugger. Below is the task manager on the virtual machine of my WACS application.   Summary In this post I demonstrated one of the feature introduced in Windows Azure SDK 2.2, which is Remote Debugger. It allows us to attach our application from local machine to windows azure virtual machine once it had been deployed. Remote debugger is powerful and easy to use, but it brings more security risk. And since it's only available for debug build this means the performance will be worse than release build. Hence we should only use this feature for staging test and bug fix (publish our beta version to azure staging slot), rather than for production.   Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

  Read the article

• Active Directory FRS problems. 13508 error and other problems

  - by ITPIP

  I have 3 Domain Controllers. We will call them DC1, DC2 and DC3. DC3 and DC2 show Event ID 13508 in their FRS logs with no follow-up event(13509 I think) to say the error had been fixed. DC1's FRS log no matter what you do never shows any events besides FRS service stopped and started. DC1 holds the SYSVOL that needs to be replicated to the other DC's. The other DC's sysvol folders are empty. I have tried the burflag method of fixing this but I haven't had any luck. My procedure for that was to stop all FRS services on all DC's. Then set the burflag on DC1 to D4 and the other two DCs burflag to D2. Started FRS on DC1 and the only event's I see in DC1's FRS event logs are service stopped and service started messages. This fact is leading me to believe that something is wrong on FRS for DC1. I believe there should be events 13553 and 13516 in the FRS event logs after an authoritative sysvol restore. The other two DC's do not have anything in their SYSVOL, otherwise I would have made one of them the authoritative sysvol. DC1 is MS Server 2003 Enterprise Edition SP2 DC2 is MS Server 2003 Standard Edition SP1 DC3 is MS Server 2003 R2 Standard Edition SP2 I did not setup this domain originally but I am now the administrator of it, so I don't have a lot of background on why certain things may have been done in the past. My main goal is to try and fix these issues to get myself better prepared to decommision DC1 and add a DC running Server 2008 to my domain. Thanks.

  Read the article

• Context Issue in ASP.NET MVC 3 Unobtrusive Ajax

  - by imran_ku07

      Introduction:          One of the coolest feature you can find in ASP.NET MVC 3 is Unobtrusive Ajax and Unobtrusive Client Validation which separates the javaScript behavior and functionality from the contents of a web page. If you are migrating your ASP.NET MVC 2 (or 1) application to ASP.NET MVC 3 and leveraging the Unobtrusive Ajax feature then you will find that the this context in the callback function is not the same as in ASP.NET MVC 2(or 1). In this article, I will show you the issue and a simple solution.       Description:           The easiest way to understand the issue is to start with an example. Create an ASP.NET MVC 3 application. Then add the following javascript file references inside your page,   <script src="@Url.Content("~/Scripts/MicrosoftAjax.js")" type="text/javascript"></script> <script src="@Url.Content("~/Scripts/MicrosoftMvcAjax.js")" type="text/javascript"></script> <script src="@Url.Content("~/Scripts/jquery-1.4.4.min.js")" type="text/javascript"></script> <script src="@Url.Content("~/Scripts/jquery.unobtrusive-ajax.js")" type="text/javascript"></script>             Then add the following lines into your view,   @Ajax.ActionLink("About", "About", new AjaxOptions { OnSuccess = "Success" }) <script type="text/javascript"> function Success(data) { alert(this.innerHTML) } </script>              Next, disable Unobtrusive Ajax feature from web.config,   <add key="UnobtrusiveJavaScriptEnabled" value="false"/>              Then run your application and click the About link, you will see the alert window with "About" message on the screen. This shows that the this context in the callback function is the element which is clicked. Now, let's see what will happen when we leverage Unobtrusive Ajax feature. Now enable Unobtrusive Ajax feature from web.config,     <add key="UnobtrusiveJavaScriptEnabled" value="true"/>              Then run your application again and click the About link again, this time you will see the alert window with "undefined" message on the screen. This shows that the this context in the callback function is not the element which is clicked. Here, this context in the callback function is the Ajax settings object provided by jQuery. This may not be desirable because your callback function may need the this context as the element which triggers the Ajax request. The easiest way to make the this context as the element which triggers the Ajax request is to add this line in jquery.unobtrusive-ajax.js file just before $.ajax(options) line,   options.context = element;              Then run your application again and click the About link again, you will find that the this context in the callback function remains same whether you use Unobtrusive Ajax or not.       Summary:          In this article I showed you a breaking change and a simple workaround in ASP.NET MVC 3. If you are migrating your application from ASP.NET MVC 2(or 1) to ASP.NET MVC 3 and leveraging Unobtrusive Ajax feature then you need to consider this breaking change. Hopefully you will enjoy this article too.     SyntaxHighlighter.all()

  Read the article

• virtualbox snapshot size

  - by intuited

  I've started using Windows 7 under VirtualBox on an Ubuntu 10.10 host. I took about 6 snapshots over the course of setting up the VM from the Windows restore image that came with the computer. My installations were more or less limited to windows updates, antivirus, and the VB Guest Additions. I uninstalled much more than I installed. The VM was running for about 24 hours total. The snapshots increased in size at a worrisome rate, even when the machine was idle: the snapshot .vdi file for the period between 11:22 PM and 9:02 AM is 6 gigs in size; during that time very little happened. The other .vdi files are between 0.5 and 3 GB, most between 1 and 2 GB. The corresponding .sav files are between 0.5 and 1 GB. The Internet connection where I was doing this is limited to 30KB/s download, which, constantly saturated, works out to less than 3 GB per 24 hour period. Is this normal? Is there something that can be done to make snapshots more practical? update On starting up the VM again, I've noticed that mscorsvw is using significant processing time. Apparently this process [precompiles .NET assemblies]. This may have been going on during the period when I was taking snapshots, which might explain some of the snapshot size increase. I would be somewhat surprised to learn that this could be responsible for over 10 GB of additional disk usage, or that it would run for roughly 24 hours. Is this possible?

  Read the article

• Windows 7 Black Screen On Boot, Seperate Bootable VHD Works Fine

  - by David Osborn

  I have a Window 7 x64 install with a bootable VHD (also Windows 7 x64). I was having problems getting my homeserver to do backups (VSS erred) so I ran check disk and used a tool from MS (cleanc2r.exe) to remove an empty Q drive from the VHD that I believe was a result of installing Office 2010 Beta. (All of this was done on the bootable VHD, not the main install.) Now I can't boot into the main install. It gets past the Starting Windows screen and then goes black. I can still boot into the bootable VHD and everything works fine from there. I have tried to boot the main install in Safe Mode/Safe Mode with Networking/and Safe Mode command prompt and it has the same issue. I ran chkdsk /r on the main install and after doing all the work there was a message about correcting some free space that was marked as allocated and also that it was unable to make an entry into the event log. I tried the startup repair utility and it found no problems. I don't see the setting for restore to last know good configuration so I couldn't do that. I don't recall installing anything new to the main install nor having hooked up any new hardware recently.

  Read the article

• 3 Ways to Make Steam Even Faster

  - by Chris Hoffman

  Have you ever noticed how slow Steam’s built-in web browser can be? Do you struggle with slow download speeds? Or is Steam just slow in general? These tips will help you speed it up. Steam isn’t a game itself, so there are no 3D settings to change to achieve maximum performance. But there are some things you can do to speed it up dramatically. Speed Up the Steam Web Browser Steam’s built-in web browser — used in both the Steam store and in Steam’s in-game overlay to provide a web browser you can quickly use within games – can be frustratingly slow on many systems. Rather than the typical speed we’ve come to expect from Chrome, Firefox, or even Internet Explorer, Steam seems to struggle. When you click a link or go to a new page, there’s a noticeable delay before the new page appears — something that doesn’t happen in desktop browsers. Many people seem to have made peace with this slowness, accepting that Steam’s built-in browser is just bad. However, there’s a trick that will eliminate this delay on many systems and make the Steam web browser fast. This problem seems to arise from an incompatibility with the Automatically Detect Proxy Settings option, which is enabled by default on Windows. This is a compatibility option that very few people should actually need, so it’s safe to disable it. To disable this option, open the Internet Options dialog — press the Windows key to access the Start menu or Start screen, type Internet Options, and click the Internet Options shortcut. Select the Connections tab in the Internet Options window and click the LAN settings button. Uncheck the Automatically detect settings option here, then click OK to save your settings. If you experienced a significant delay every time a web page loaded in Steam’s web browser, it should now be gone. In the unlikely event that you encounter some sort of problem with your network connection, you could always re-enable this option. Increase Steam’s Game Download Speed Steam attempts to automatically select the nearest download server to your location. However, it may not always select the ideal download server. Or, in the case of high-traffic events like big seasonal sales and huge game launches, you may benefit from selecting a less-congested server. To do this, open Steam’s settings by clicking the Steam menu in Steam and selecting Settings. Click over to the Downloads tab and select the closest download server from the Download Region box. You should also ensure that Steam’s download bandwidth isn’t limited from here. You may want to restart Steam and see if your download speeds improve after changing this setting. In some cases, the closest server might not be the fastest. One a bit farther away could be faster if your local server is more congested, for example. Steam once provided information about content server load, which allowed you to select a regional server that wasn’t under high-load, but this information no longer seems to be available. Steam still provides a page that shows you the amount of download activity happening in different regions, including statistics about the difference in download speeds in different US states, but this information isn’t as useful. Accelerate Steam and Your Games One way to speed up all your games — and Steam itself —  is by getting a solid-state drive and installing Steam to it. Steam allows you to easily move your Steam folder — at C:\Program Files (x86)\Steam by default — to another hard drive. Just move it like you would any other folder. You can then launch the Steam.exe program as if you had never moved Steam’s files. Steam also allows you to configure multiple game library folders. This means that you can set up a Steam library folder on a solid-state drive and one on your larger magnetic hard drive. Install your most frequently played games to the solid-state drive for maximum speed and your less frequently played ones to the slower magnetic hard drive to save SSD space. To set up additional library folders, open Steam’s Settings window and click the Downloads tab. You’ll find the Steam Library Folders option here. Click the Add Library Folder button and create a new game library on another hard drive. When you install a game in Steam, you’ll be asked which library folder you want to install it to. With the proxy compatibility option disabled, the correct download server chosen, and Steam installed to a fast SSD, it should be a speed demon. There’s not much more you can do to speed up Steam, short of upgrading other hardware like your computer’s CPU. Image Credit: Andrew Nash on Flickr     

  Read the article

• Can I edit the snapshots of websites on most visited sites page in Chrome?

  - by arik

  I saw the previous chain of discussion, but did not find a way to continue the thread - I have found the "Preference" (I have Windows 7), but in that, I did not find clearly what to modify. I did find a section called 'URLs pinned" or something like this, but it did NOT match fully the ones I have. I have activated the 'profile sync' for Chrome - don't know if it has any effect. Can you manually edit the icons of the most visited sites, for the new tab page in Chrome? When you open a new tab in Chrome, I get the 'new page' tab, where I selected the 'most popular', so I have 8 icons with the 8 most popular sites I visited; I can also pin any one of those I see on screen, such that they remain 'permanent' there. We are missing one which would point to, say, "hotmail". So, I was looking for a way to add 'hotmail' to be one of the 8. (and, by the way, we ticked the 'X' on one of those 8, and now it remains grey / shows nothing in it). So, my double-question: How can I add a URL of my choice into one of those 8 spaces? How can I restore usage of the last one?

  Read the article

• Unity 2d support dropped in 12.10, what now?

  - by tomodachi

  So its been announced. Ubuntu is dropping unity 2d support. I wouldn't mind if it wasn't for two things that are important to me. 1) A working system Unity is nice, i try to use it quite often. But it lags. 2) Support for older hardware. I also have old computers. You can imagine how they would work with unity if my current laptop is slog in Ubuntu. I guess i could use another desktop environment/ window manager , like switching to fluxbox. Anyone have any suggestion ideas/solutions on how to proceed with Ubuntu in the future? All insights welcome

  Read the article

• Chrome Apps Office Hours

  Chrome Apps Office Hours Ask and vote for questions here: goo.gl Now that you've got a handle on what Chrome Apps are and what they can do, we're going to build an app live, and dive into the new Windowing API to show you how you can completely configure the look and feel of your Chrome App window. We'll also explain more about Content Security Policy, and how it might affect your development. Remember, we want to hear from you! What are the APIs that you're most interested and excited about? Tell us at goo.gl so we can cover the things you're most interested in first! Be sure to add this event to your calendar and tune in next Tuesday! From: GoogleDevelopers Views: 1504 36 ratings Time: 44:00 More in Science & Technology

  Read the article

• Exporting SWF With Transparent Background For Scaleform/UDK

  - by Alex Shepard

  After looking all over in the UDN and forums I have yet to find a solution for this: I am currently using Flash CS3 and Actionscript 2.0 to build my scaleform menus and I can use them in the UDK. For various reasons I can't use the handy plugin Autodesk supplies to enable this export so I publish my flash documents to swf the old fassioned way and manually use the gfxexport.exe tool to get my .gfx file. I can then import into the UDK the normal way. My problem is that the flash movies that I import will not alpha blend even if the material is set to blend in the alpha channel of the target render texture. My project images are set up to export properly. My classpath for Actionscript 2.0 is set to the correct location. My HTML publish settings have window mode set to Transparent Windowless. Is it possible to export without the scaleform flash extension and still get the desired effects and if so how might I do so? Am I merely missing something from my project setup?

  Read the article

• Can't Log in to Lubuntu 12.04 X Server

  - by isomorphismes

  As of rebooting yesterday I can't login as myself to the X server part of 64-bit Lubuntu 12.04. Same problem as Can not get passed the login screen but that solution didn't work for me. Troubleshooting steps I already took: I can log in as guest (with whatever window manager) to the graphic (X) view of Lubuntu. log in as myself into a virtual terminal. (In fact I'm writing this from w3m for that reason.) So I know my password is correct and that most aspects of the system are working. One of the top google results for "can't log into lubuntu" mentioned a disk-full problem on netbooks; I don't have that problem. Let me know if I need to paste any messages or config files to make this question clearer and I'll do so. $ ls -l /home total 12 drwxr-xr-x 99 me me 12288 May 26 14:16 me $ ls -ld /tmp drwxrwxrwt 16 root root 4096 May 26 15:46 /tmp

  Read the article

• The Command Prompt is Outdated: 2 Command Prompt Replacements for Windows

  - by Chris Hoffman

  The Command Prompt window included with Windows is outdated. The command line itself isn’t outdated – the Command Prompt just lacks modern features like tabs, transparency, support for other shells, easy selection of text, and other modern Windows features. If you spend any time at all with the Command Prompt, you’ll want to check out one of these two open-source Command Prompt replacements that improves on the original Command Prompt. HTG Explains: Does Your Android Phone Need an Antivirus? How To Use USB Drives With the Nexus 7 and Other Android Devices Why Does 64-Bit Windows Need a Separate “Program Files (x86)” Folder?

  Read the article

• Linux Mint is Brilliant

  - by Simon Moon

  Most of my blog posts sound way too whiny. I'm not that guy. (Am I?) I've been using SUSE-flavored Linux for personal projects since 2002 (SUSE Linux 8.1). This past weekend, I made the heart-wrenching decision to abandon openSUSE (version 12.1) in favor of Linux Mint (version Maya). OpenSUSE had just become too burdensome. Packages that installed easily on RedHat or Debian always had issues running on top of OpenSUSE. And I never could get the Heroku Toolbelt installed in any kind of usable state.And so, ...I'm beginning again with this enticing young thing -- Mint with the Cinnamon window environment. Delicious. And while I'll always have fond memories of my years with openSUSE, I've got to admit that Mint makes running Linux feel good again. http://blog.linuxmint.com/?p=2031

  Read the article

• can't login to Unity always login to Unity 2D

  - by Goddard

  I select Ubuntu on login and it always loads Unity 2D. I ran /usr/lib/nux/unity_support_test -p And got this error X Error of failed request: BadWindow (invalid Window parameter) Major opcode of failed request: 137 (NV-GLX) Minor opcode of failed request: 4 () Resource id in failed request: 0x21f Serial number of failed request: 42 Current serial number in output stream: 42 I'm using 12.04 with all the latest updates. nvidia-installer --version nvidia-installer: version 295.53 ([email protected]) Sat May 12 00:34:26 PDT 2012 The NVIDIA Software Installer for Unix/Linux. This program is used to install, upgrade and uninstall The NVIDIA Accelerated Graphics Driver Set for Linux-x86_64. Copyright (C) 2003 - 2010 NVIDIA Corporation.

  Read the article

• Moving domain and keeping IMAP email - Linux Evolution, Mac Mail

  - by Douglas Squirrel

  This question is about keeping email during a server move, where the clients are Linux (me) and Mac (my wife) using IMAP. I receive email at [email protected] using a webmail service that my hosting company (1and1) provides. I read it via IMAP in evolution, so I should have copies of all the emails on my local machine. I have just moved mydomain.com from one type of account to another, and the hosting company don't move my existing email on the server when I do this - I assume they move my account to a different mailserver, and don't choose to provide a migration path for the email to move too (yes, this is annoying). Before migrating, I backed up Evolution (File - Backup settings) and did a spot-check in the evolution-backup.tar.gz file to be sure that my mail was in there. After migrating, I restored (File - Restore settings) and had hoped that I would see all my mail again. Unfortunately, Evolution just shows me new mail sent to the account, not the old mail. Is there a way to get the old mail back in the mailserver, or at least displaying in Evolution, as it was before the move? If not, can I read it in some convenient way, e.g. in Evolution offline or in a text file (then I can pick the mails I really want to keep and resend them to myself)? Also, I am about to do a similar move for my wife's domain, [email protected]. She reads her mail on a Mac using IMAP to Apple Mail. Is there anything I can do to make the move smooth for her? (I have backed up [her user]/Library/Mail already, but not sure what to do once the move is done.)

  Read the article

• Configuring port forwarding for SSH - no response outside LAN

  - by WinnieNicklaus

  I recently moved, and at the same time purchased a new router (Linksys E1200). Prior to the move, I had my old router set up to forward a port for SSH to servers on my LAN, and I was using DynDNS to manage the external IP address. Everything worked great. I moved and set up the new router (unfortunately, the old one is busted so I can't try things out with it), updated the DynDNS address, and attempted to restore my port forwarding settings. No joy. SSH connections time out, and pings go unanswered. But here's the weird part (i.e., key to the whole thing?): I can ping and SSH just fine from within this LAN. I'm not talking about the local 192.168.1.* addresses. I can actually SSH from a computer on my LAN to the DynDNS external address. It's only when the client is outside the LAN that connections are dropped. This surely suggests a particular point of failure, but I don't know enough to figure out what it is. I can't figure out why it would make a difference where the connections originate, unless there's a filter for "trusted" IP addresses, which is perhaps just restricted to my own. No settings have been touched on the servers, and I can't find any settings suggesting this on the router admin interface. I disabled the router's SPI firewall and "Filter anonymous traffic" setting to no avail. Has anyone heard of this behavior, and what can I do to get past it?

  Read the article

• Accidentally deleting all OSX users using dscl

  - by gutch

  OK, so I just did something really stupid and deleted all the user accounts on an OSX 10.6.6 machine by running this: sudo dscl . -delete /users What I actually wanted to do was delete a single, troublesome account using a command like this: sudo dscl . -delete /users/localadmin ...but I absent-mindedly pressed return too early and deleted the lot. I've tried using -list and can confirm that I have indeed wiped all the accounts. The machine is currently running fine, but I'm sure that once I log out / reboot then it will be completely broken. I don't mind that I've deleted the normal user accounts (there was only one I wanted anyway). But it's surely going to be a big problem that system accounts like _installer and _jabber and _lda and _windowserver etc etc are gone. So my question is, how can I restore the standard set of system accounts? Do I have to reinstall OSX from scratch? Or can I either: undelete those system accounts, or run some command to recreate the system accounts?

  Read the article

• Mirror a RAID0 volume

  - by Ghostrider

  I have two SSD running in RAID0. The capacity and speed are just great. I use Windows Home Server to do incremental daily backups. This is fine and well and I've successfully restored from these backups. However. When one of the disks physically died. I was stuck without a working system until the replacement arrives so that I can restore the array from backup. WHS restoration takes about 5 hours which basically means that I'm losing entire day for the process. Is it possible to set up kind of a recovery volume for the RAID array? Use a single mechanical HDD that would be updated with the exact clone of the RAID array on a daily basis. This way if the array goes offline for some reason, I can just boot from the mechanical HDD, lose some perf but will still be able to work. The machine in question runs Windows 7. Creating RAID01 is not an option because of the high price of the SSD and the fact that it still doesn't protect against failure of RAID controller. Is there any way it can be set up?

  Read the article

• Restoring snapshot for Microsoft Exchange server

  - by Mugen

  Hi, The background: I need to do some testing with Microsoft exchange server. Specifically, I'll be installing some software on the Microsoft exchange server machine and uninstalling that same software again. The problem I face: While I repeatedly do this with different versions of my software there is a chance that sometime later the Exchange server installation might get corrupted. When that happens I would need to reinstall Exchange server which I feel is somewhat of a chore. So what I am planning to do is to install the Ms Exchange server on a virtual machine in VMware ESX server and take a snapshot so that during my work whenever the installation is corrupted I can restore the snapshot. So here's my question: Would restoring the snapshot for the Microsoft Exchange server virtual machine work correctly? I'm not familiar with the intricacies of exchange server and any changes (if any) that happen with the Domain controller when we use or install an exchange server (Personally I don't think that should happen but just making sure). I have a shortage of time and hence decided to post this question here. Could someone please tell me whether restoring a snapshot for Exchange server would work fine? Thanks a load, Mugen

  Read the article

• VMware vSphere 4.1 and BackupExec 2010

  - by Josh

  I'm sure a common problem with most shops is backups, their size, and the window in which you have to back up the data. What we are working with: VMware vSphere 4.1 Cluster PS4000XV Equallogic Storage Array (1.6TB Volume dedicated for Backup to Disk) Physical Backup Server with a single LTO4 drive. BackupExec 2010 R3 with the following agents, Exchange, SQL, Active Directory, VMware. Dual Gigabit MPIO Connections between all devices (Storage Array, Backup Server, VM Hosts) What we would like to accomplish: I would like to implement an efficient Backup to Disk to Tape solution where all of our VMs are backed up to the Storage Array first, and then once completely backed up to the array are replicated to tape. In the event we needed to recover, we would be able to do so directly from tape. Where we are at currently. Of the several ways I have setup the jobs in Backup Exec 2010 R3 the backup jobs all queue up at the same time, as soon as a job is finished backing up to disk it then starts that same job to tape, but pulling from the original source instead of the designated B2D location. I understand that I could create a job that backs up the "Backup to Disk" folder to tape, but in the event of restoration, I would first need to stage the data in the B2D folder before I could restore the VM. I would really like to hear from individuals in similar situations. Any and all comments and critiques are appreciated.

  Read the article

• Change which server mailbox is associated with in Exchange 2007

  - by tacos_tacos_tacos

  I have restored and mounted an EDB file onto a new Exchange 2007 Server. However, the old server is still online and although all the mailboxes I need are in the newly-mounted database, in Exchange 2007 System Manager it still shows that the mailbox is associated with the old server. If I try to "Move" the database it actually tries to copy the files from the old server to the new server, which is not necessary because they are already there - and produces and error about the mailbox on the destination already existing. How can I simply tell Exchange (AD?) to use the new server to find the mailbox rather than the old? Edit: I did the restore by taking the old server offline (turning off all Exchange services), copying EDB file to the new server, restoring it with eseutil, and mounting it to the new server. I did it this way in part because I didn't know a better way and in part because I couldn't use move-mailbox as the source location had a horrible Internet connection (which is why Exchange is being moved to the new location). I had to copy the EDB from the old server to a hard disk, go somewhere with a better Internet connection, upload the EDB to the new server.

  Read the article

• Microsoft Codename Houston

  - by kaleidoscope

  On one of the final talks about SQL Azure in Day 3 of PDC09, David Robinson, Senior PM on the Azure team, announced a project codenamed ‘Houston’ which is basically a Silverlight equivalent of SQL Server Management Studio. The concept comes from the SQL Azure being within the cloud, and if the only way to interact with it is by installing SSMS locally then it does not feel like a consistent story. From the limited preview, it only contains the basics but it clearly lets you create tables, stored procedures and views, edit them, even add data to tables in a grid view reminiscent of Microsoft Access. The UI was based around the standard ribbon bar, object window on the left and working pane on the right. As of now this tool is still pre-alpha and it seems like a basic tool that will facilitate rapid database development on cloud. When asked about general availability, no dates were given but calendar 2010 was indicated as the target. More information can be found at:      http://sqlfascination.com/2009/11/20/pdc-09-day-3-sql-azure-and-codename-houston-announcement/   Tinu, O

  Read the article

• Windows 7 - Windows XP - sharing - why isn't working?

  - by durumdara

  Hi! This is seems to be "hardware" and not "software" / "programming" question, but I need to use this share in my programs, so it is "close to programming". We had an XP based wireless network. The server is XP Professional, the clients are XP Home (Notebooks). This was working well with folder sharing (with user rights, not simple share). Then we replaced the one of the notebook with Win7/X64 notebook. First time this can reach the server, and the another client too. Later I went to another sites, and connect to another servers, another networks. And then, when I return to this network, I saw that I cannot connect to this server. Nothing of resources I see, and when try to dbl click on this computer, I got login window, where I can write anything, never I can login... The interesting part, that: Another XP home can see the server, can login as quest, or with other user. The server can see the XP home notebook. The Win7 can see the notebook's shared folders, and XP home can see the Win7 shared folders. The server can see the Win7 folders, BUT: the Win7 cannot see the server folders. Cannot see the resources too... The Win7 is in "work networking group", the group name is not mshome. I tried everything on the server, I tried to remove MS client, restore it with simple sharing, set guest password, etc., but I lost the possibilities to access this server from Win7. Does anyone have any idea what I need to see, what I need to set to access these resource - to use them in my programs? Thanks for every info, link: dd

  Read the article

< Previous Page | 363 364 365 366 367 368 369 370 371 372 373 374  | Next Page >