Search Results

Search found 12834 results on 514 pages for 'small wolf'.

Page 368/514 | < Previous Page | 364 365 366 367 368 369 370 371 372 373 374 375  | Next Page >

  • Getting started with webserver clustering.

    - by Ernie
    I work for a small ISP, and we host about 250 domains and all the stuff that goes along with that: DNS, mail, spam filtering, and backups. Currently, we have separate DNS servers (two of them) and mail servers (outgoing mail is actually on the secondary DNS server, but was previously on its own server). In the past, this was done as an insurance measure. The last thing we need is for some doofus (usually yours truly) to hose a server, taking out DNS and mail right along with it, or for spammers to jam our incoming SMTP server, preventing outgoing mail from being sent too. In the past, this was a problem, and our servers were set up the way they are now to combat it. However, clustering solutions like Sun's Cobalt RAQ (in days of olde) and Virtualmin appear to cater to an all-in-one approach, then deal with failures through redundant servers. I have avoided this thus far, but we've been using Virtualmin on our web server for a while now, and I'd like to expand into using it for a high availability cluster. Our networking partner has recently built a datacenter that has eliminated all of our other bugaboos like network, cooling, and power issues, so now the only thing left to go wrong is me hosing a server, which happened earlier this month. One of the bigger reasons we've avoided going this route is because our hardware requirements aren't particularly high. One server easily handles all the sites we host (most of them are flat sites). Also, load-balancing routers tend to be expensive and complicated. All that I'm really expecting to do is building a two-node cluster for redundancy so that when I hose a server (however rare that might be), we're not out for 8-12 hours while I rebuild it. What I need to know is how to get started, and if I'm really in a position to bother with this kind of thing at all.

    Read the article

  • Using UDF on a USB flash drive

    - by CesarB
    After failing to copy a file bigger than 4G to my 8G USB flash drive, I formatted it as ext3. While this is working fine for me so far, it will cause problems if I want to use it to copy files to someone which does not use Linux. I am thinking of formatting it as UDF instead, which I hope would allow it to be read (and possibly even written) on the three most popular operating systems (Windows, MacOS, and Linux), without having to install any extra drivers. However, from what I found on the web already, there seem to be several small gotchas related to which parameters are used to create the filesystem, which can reduce the compability (but most of the pages I found are about optical media, not USB flash drives). I would like to know: Which utility should I use to create the filesystem? (So far I have found mkudffs and genisoimage, and mkudffs seems the best option.) Which parameters should I use with the chosen utility for maximum compability? How compatible with the most common versions of these three operating systems UDF actually is? Is using UDF actually the best idea? Is there another filesystem which would have better compatibility, with no problematic restrictions like the FAT32 4G file size limit, and without having to install special drivers in every single computer which touches it?

    Read the article

  • VMWare Newbie - looking for hardware recommendations and help :) [closed]

    - by Dan
    I am looking for some hardware recommendations on an upcoming virtualization project. We are a small company (80 users - 25 in site 1, 55 in site 2) currently using Windows Server 2003 - no VM servers yet. Our AD is setup where site 1 is the root domain and site 2 is a subdomain/subnet - connected by T1 and VPN for failover. The current DC's also server as file servers, print servers, AntiVirus servers. Email is in the cloud. Additionally then in site 1 we have 3 additional member servers - one running IBM Websphere for a customer specific app, one running Infor PowerLink (no real heavy load) and another that we use for Virtual Studio apps and also runs DirSync for Exchange Online. No heavy workloads on any of these machines really. We also have an AS400 box that we run ERP/CRM software on that site 2 connects to over the WAN link. In site 2 we also have a SQL machine that runs on Win2K server. Database files are not large less than 5 GB. Light to Medium workload on this machine. File servers in each site store less than 500 GB data and probably won't grow to more than 1TB in the next 5 years. I am looking to go to VMWare in both sites and virtualize all servers. What recommendations do you have for server, storage hardware? Is it safe to virtualize all of your DC's? Any help or advice would be greatly appreciated. Thanks.

    Read the article

  • What do you upgrade to make games load faster? [on hold]

    - by Superbest
    Let's say you have a relatively modern game like Shogun 2. The loading screens take several minutes. This bothers you and you'd like to improve it. What is actually going on when loading screens are up? I'm guessing assets are being loaded into memory from disk, and possibly being decompressed first. However, what is actually causing the slow down? The memory? Mainboard? CPU? HDD? If you had $100 to spend on upgrades and your only goal is to speed up loading screens without reducing other performance, what component of the computer does it make sense to upgrade for maximum benefit? If your answer is "it depends on the existing setup", what sort of benchmarks would you run to determine what is causing the bottleneck? What if you had $500 instead? I give the two budgets for context. I am not asking for actual recommendations about which component to buy (nor are the numbers supposed to be rigid limits), but what features are important when shopping for components with small and large budgets (a large budget could allow buying multiple components which are not so good on their own, but work particularly well together). I mention Shogun 2 as an example, but I'm asking about reducing overall loading times, across all games, not just one game. Therefore, "put it on a solid state disk" probably won't be good solution, because putting every game on your SDD will quickly fill it up.

    Read the article

  • Failing to send email on Ubuntu box (Karmic Koala)

    - by user25312
    I have a home network with an XP and Ubuntu (9.10) box. I have created a small test php script for checking that I can send emails from my machine. I am using the same php.ini file with the same [mail settings], yet the file works on my XP box, and fails on the Ubuntu box. I have included the script here, hopefully, someone can spot whats going wrong: <?php // send e-mail to ... $to="[email protected]"; // Your subject $subject="Test Email"; // From //$header="from: test script"; $header='From: host-email-username@hostdomain_here' . "\r\n" . // Your message $message="Hello \r\n"; $message.="This is test\r\n"; $message.="Test again "; // send email $sentmail = mail($to,$subject,$message,$header); // if your email succesfully sent if($sentmail){ echo "Email Has Been Sent ."; } else { echo "Cannot Send Email "; } ?> The emails have been spoofed for obvious reasons, but otherwise, the script is exactly as the one I tested [Edit] I have since installed mailutils package on my Ubuntu box, now the script runs and returns 'Email has been sent'. However, the mail never arrives in my mail inbox (I've waited 1 day so far). Is there something else I need to be looking at?

    Read the article

  • IPSec for LAN traffic: Basic considerations?

    - by chris_l
    This is a follow-up to my Encrypting absolutely everything... question. Important: This is not about the more usual IPSec setup, where you want to encrypt traffic between two LANs. My basic goal is to encrypt all traffic within a small company's LAN. One solution could be IPSec. I have just started to learn about IPSec, and before I decide on using it and dive in more deeply, I'd like to get an overview of how this could look like. Is there good cross-platform support? It must work on Linux, MacOS X and Windows clients, Linux servers, and it shouldn't require expensive network hardware. Can I enable IPSec for an entire machine (so there can be no other traffic incoming/outgoing), or for a network interface, or is it determined by firewall settings for individual ports/...? Can I easily ban non-IPSec IP packets? And also "Mallory's evil" IPSec traffic that is signed by some key, but not ours? My ideal conception is to make it impossible to have any such IP traffic on the LAN. For LAN-internal traffic: I would choose "ESP with authentication (no AH)", AES-256, in "Transport mode". Is this a reasonable decision? For LAN-Internet traffic: How would it work with the internet gateway? Would I use "Tunnel mode" to create an IPSec tunnel from each machine to the gateway? Or could I also use "Transport mode" to the gateway? The reason I ask is, that the gateway would have to be able to decrypt packages coming from the LAN, so it will need the keys to do that. Is that possible, if the destination address isn't the gateway's address? Or would I have to use a proxy in this case? Is there anything else I should consider? I really just need a quick overview of these things, not very detailed instructions.

    Read the article

  • Slow network file transfer (under 20KB/s) on newly built x64 Win7

    - by Mangoshake
    I am getting <20KB/s for local network file transfer. If I transfer a very small file (less than 100KB) it would start quickly then slow down to <20KB/s. all subsequently network file transfer would be slow, a reboot is needed to reset this. If I transfer a large file it would be stuck on calculating for a long time and then begin with <20KB/s immediately. This is a newly built desktop running Windows 7 x64 SP1. Realtek gigabit LAN from the motherboard (ASRock Extreme3 gen3). Problematic speed is observed on the private LAN, both through ethernet and WiFi. The Router is D-Link DIR-655. Remote Differential Compression is off. Drivers are up-to-date from ASRock's website. I have tested network file transfer to and from another Windows 7 laptop and a MacBook Pro, so I am fairly certain it is the desktop's problem. The slow speed only happens with one direction also, outbound from the desktop, regardless of whether I initiate the file transfer action from the origin or the destination. Inbound network file transfer and internet speeds are fine, so I don't think this is a hardware issue. I am getting 74.8MB/s internet upload speed from speedtest.net (http://www.speedtest.net/result/1852752479.png). Inbound network file transfer I can get around 10-15MB/s. I am hoping this community has some insight for me to troubleshoot this. I don't see anything obviously related from the Event Viewer, and beyond that I just don't know where else to look. Any suggestions are greatly appreciated, thank you in advance.

    Read the article

  • Formatting a a memory stick with two partitions?

    - by Marius
    I have a 16GB memorystick which used to have a Linux partition. It therefore has two partitions; 2GB FAT32 and 14GB linux boot drive. The linux part stopped working, so I decided to reinstall it. But windows can't see that partition. I tried formatting the whole disk, but I can only format one partition (the FAT32). There seems to be no way to combine the two partitions into one big one, and there seems to be no way for windows to partition the large part of the memorystick to but Linux on it. In the windows partition manager, windows sees the large unused partition, and it let me delete it. But once I have deleted it, I'm not allowed to format it. Also I cannot delete or resize the small partition. So, to summarize: I have a memorystick with two partitons. Windows only sees one of them, and won't let me use the other one. I would like to combine the two partitions so I can install Linux on the memory stick again.

    Read the article

  • cfengine3 file_copy only on source side change

    - by megamic
    I am using the 'digest' copy method for all file copy promises, because of the way we package and deploy software, I cant rely on mtime for the criteria for updating files. For various reasons, I am not employing the client-server approach with a central configuration server: rather we package and deploy our entire configuration module to each server, so from cf-engine's perspective, the source and target are local on the server it is running. The problem I am having with this approach is that the source will always update the target when they differ - which is what I want most of the time, usually because the source has been updated. However, like many other cfengine users, we are running an operational environment, where occasionally emergency fixes have to be applied immediately - meaning we don't have time to rebuild and redeploy a configuration module, and the fix will often be applied by deploying a tarball with specific changes. Of course this is problematic if cf-engine comes along 5 mintues later and reverts the changes. What we would like is to be able to make small, incremental changes to our servers, without them being reverted, until the next deployment cycle at which time the new source files would be copied. We do not consider random file corruption or mistaken changes to involve enough risk to warrant having cfengine constantly revert deployments to their source copy - the ability to deploy emergency fixes and have them stay that way until the next deployment would be of much greater value and utility. So, after all that, my question is this: is cf-engine capable of detecting whether it was the source or target that changed when the files differ, and if so, is their a way to use the 'digest' copy method but only if the source side changed? I am very open to other ideas and approaches as-well, as I am still quite new to this whole configuration management thing.

    Read the article

  • Defeating the RAID5 write hole with ZFS (but not RAID-Z) [closed]

    - by Michael Shick
    I'm setting up a long-term storage system for keeping personal backups and archives. I plan to have RAID5 starting with a relatively small array and adding devices over time to expand storage. I may also want to convert to RAID6 down the road when the array gets large. Linux md is a perfect fit for this use case since it allows both of the changes I want on a live array and performance isn't at all important. Low cost is also great. Now, I also want to defend against file corruption, so it looked like a RAID-Z1 would be a good fit, but evidently I would only be able to add additional RAID5 (RAID-Z1) sets at a time rather than individual drives. I want to be able to add drives one at a time, and I don't want to have to give up another device for parity with every expansion. So at this point, it looks like I'll be using a plain ZFS filesystem on top of an md RAID5 array. That brings me to my primary question: Will ZFS be able to correct or at least detect corruption resulting from the RAID5 write hole? Additionally, any other caveats or advice for such a set up is welcome. I'll probably be using Debian, but I'll definitely be using Linux since I'm familiar with it, so that means only as new a version of ZFS as is available for Linux (via ZFS-FUSE or so).

    Read the article

  • Authenticated User Impersonation in Classic ASP under IIS7

    - by user52663
    I've recently moved one of our servers from Server 2003 and IIS6 to Server 2008 R2 and IIS7 (technically IIS7.5 I suppose). In doing so I am transitioning a small account management tool written in classic ASP and have run into a problem with user impersonation. Extensive searching hasn't been much help so far. Under IIS6, the site was configured to impersonate the logged-in user. Thus, if a domain admin logged in, he was able to run commands to create user directories, adjust permissions, etc. Using Procmon you can see the processes executing as that user. This worked fine. However, with the same code under IIS7, I am unable to get this behavior. I have enabled Basic Authentication, disabled Anonymous Auth, enabled impersonation and have changed the app pool to classic instead of integrated pipelining. Everything seems to be configured correctly, however, all the processes launched by the classic ASP site continue to run as the default AppPool identity and not the logged-in user. If it matters, programs are being launched with code such as: set Wsh = Server.CreateObject("WScript.Shell") Wsh.Run("cmd.exe /C mkdir D:\users\foo") Monitoring via Procmon shows cmd.exe being run as either "Classic .NET AppPool" or "DefaultAppPool" depending on the pipeline mode. Any suggestions on how to get the classic ASP site to impersonate and execute as the authenticated user would be great. Thanks!

    Read the article

  • What's the state of the art in image upscaling?

    - by monov
    I like to collect cool pics and use them as wallpapers or for other things. Often, artists publish only low-res versions, probably for fear of theft. Example: Gabriel Pulecio's BIRDS Now, if I want to use that as a wallpaper, I'd have to upscale it, and obviously that'd make it look blurry because of the bicubic interpolation. I realize there's no real way to get a high-res version from a low-res pic, because the information is not simply there. That said, I'm wondering if heuristics have been developed for upscaling with less apparent loss of quality. Those would probably be optimized for specific image types. For photorealistic pictures, for cartoons with large flat areas, for pixel art... One algorithm I'm aware of is Seam Carving. It works for some kinds of pics, especially ones with a plain, undetailed or uninteresting background, and a subject that strongly stands out. But it's far from being general-purpose. Applying it to the above pic produces this. It looks quite sharp, but the proportions are horribly distorted because the algorithm is not designed for this kind of pic. Another is Pixel art scaling algorithms. Those are completely unfit for anything other than actual pixel art that's pixelized to begin with. For example, I tried the scale2x windows binary on my pic, but its output was nearly indistinguishable from nearest-neighbour scaling because the algorithm didn't detect any isolated pixely fragments to work from. Something else I tried was: I enlarged the image in Photoshop with bicubic interpolation, then I applied unsharp mask. The result looks pretty bad. The red blotch is actually resized reasonably well, but the dove is far from it. What I'm looking for is some app that makes a best-effort attempt at upscaling any input image while minimizing blurriness. If you know of any, I'll be thankful. Note that the subjective prettiness and sharpness of the result is what matters... the result doesn't need to be completely faithful to the original small image.

    Read the article

  • Dell fumbles OpenManage installation process, forgets to write documentation?

    - by bwerks
    Hi all, I'm setting up a Dell PowerEdge 2950 for a small business, and I've just spent a while with Dell OpenManage Server Administrator 6.2, trying to clear the installation process of errors before I execute it. Right now I'm getting the following warning from the installer. The installer has detected that the HTTPS listener is not configured for Windows Remote Management. You can either configure the HTTPS listener before installing Remote Enablement, or install Remote Enablement now by selecting the "Custom" installation screen and configure the HTTPS listener later. See the "Remote Enablement Requirements" section in the "Dell OpenManage Installation and Security User's Guide" for information on configuring the HTTPS listener. Note: Remote Enablement is required to manage this system from a remote Server Administrator Web Server and is applicable only for those systems that support Server Instrumentation. Click here to configure HTTPs Listener for Windows Remote Management. The italicized line is a link, which executes...something...via cmd, and doesn't seem to help the problem. Not knowing exactly what to do here, I consulted the documentation. I read through the Setup and Administration section of the User's Guide, but all that it contained was a weird primer on role-based security and some SNMP stuff. The next section skips installation entirely and moved on to features of the suite. Thinking myself crazy, I consulted the readme, which told me that for installation I should consult the "Dell OpenManage Installation and Security Version 6.2 User's Guide" which not only doesn't exist in the documentation, but also not in all of google? Soo yeah, if anyone is familiar with this problem, drop me some knowledge!

    Read the article

  • Custom MS-DOS / FreeDOS

    - by user1801387
    Goal : Build a custom DOS to boot into. To automate tasks like formating a drive, or doing recovery. I've been using Grub4DOS to boot into these images. So far I've looking into taking a windows repair disk ISO and extracting. I can't seem to find the autoexec.bat in the disk. I really don't know where to look for the startup configuration file to change or how to add an autoexec.bat. I've tried MS-DOS 6.22. But it lacks the diskpart tool I require. I've tried extracting the images and adding it. Then I got a boot failed. I assume that after i added it. All the files when to lower case names and I assume that the OS is case sensitive. Then I've looking into using FreeDOS. But I don't know how it works at all. Partially because I can't seem to grasp the help/wiki's information. I looked into getting a bearbones release with just the kernel and I think it's the config.sys file. But I don't have any idea on how the packaging system works to incorporate diskpart into it. So really I'm in general looking for a small bootable DOS to where I can incorporate diskpart and setup an autoexec.bat for the actual function to carry out and to boot into. Thanks :) This is just for personal use also.

    Read the article

  • Failed loading ioncube

    - by time
    I recently upgraded a small server to Ubuntu 12.10 (from 12.04), thus upgrading PHP from 5.3 to 5.4. However, I'm getting this in root's mailbox several times a day: Subject: Cron <root@xxxxxxx> [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -ignore_readdir_race -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete Content-Type: text/plain; charset=ANSI_X3.4-1968 X-Cron-Env: <SHELL=/bin/sh> X-Cron-Env: <HOME=/root> X-Cron-Env: <PATH=/usr/bin:/bin> X-Cron-Env: <LOGNAME=root> Message-Id: xxxxxxxxxxxxxxxxxxxxxxxx Date: Sun, 9 Dec 2012 05:09:02 -0500 (EST) Failed loading /usr/lib/php5/20090626+lfs/ioncube_loader_lin_5.3.so: /usr/lib/php5/20090626+lfs/ioncube_loader_lin_5.3.so: undefined symbol: php_body_write I assume that's coming up because it's for PHP 5.3. How can I just get rid of ioncube? I have no need for it, I don't even remember installing it. That .so file doesn't exist, and I've grep'd several locations for "ioncube" and I can't seem to figure how to stop that message from flooding the mailbox.

    Read the article

  • Font for Wine that supports the entire character set of the Win32 Console?

    - by Brian Campbell
    I would like to be able to display in the Wine console all characters that the Win32 console can display. I've written a small test program to print out all 8-bit characters: #include <stdio.h> int main(int argc, char *argv[]) { int i, j; for (i = 0; i <= 0xF0; i+=0x10) { for (j = i; j <= i + 0x0F; ++j) printf("%2x:%c", j, (char)j); printf("\n"); } getchar(); return 0; } Under Wine, the best I can do so far is using Andale Mono: While this is what I see on Windows Server 2008: Is there anywhere I can legally download a font that will allow me to view all of those characters under Wine? edit I've found a set of DOS fonts that includes a CP437 font, which should cover the character set I'm interested in. However, even if I install this font, wineconsole doesn't seem to recognize it. Is there any way I can get wineconsole to use this font, or convert this font to a format that wineconsole can use? Or is there any way I can extract fonts from DOSEMU for use in Wine? Oh, and I should probably mention that I'm on Mac OS X 10.6.2, installing Wine via MacPorts, using the wine-devel package. more information I have tried installing some console fonts that should cover the full character set as Mac OS X fonts (such as the NewDOS font listed above, and a font I tried converting from the fonts supplied by DOSEMU). Wine does not seem to pick up on new fonts installed in Mac OS X. Is there a way to register new fonts I've installed with Wine? Would manually editing the system.reg file that seems to contain font mappings work, or is there something else I'd need to do? bump Bounty ends soon, I'm still looking for an answer for this. Does anyone use the Wine console for complex text user interfaces?

    Read the article

  • Plesk wildcard subdomain not working

    - by avdgaag
    I'm trying to set up a wildcard subdomain on my VPS. Ultimately I want to end up with this: main site: my.domain.tld subdomain: sub1.my.domain.tld - should end up serving my.domain.tld/sub1 I am using plesk 8.6. I have created a DNS A record pointing at my VPS' IP. I have then restarted the DNS server and waited up to 24 hours. But trying ping sub1.my.domain.tld results in an unknown host error. So I know there's more stuff involved, configuring apache etc. But so far, I cannot even get the subdomain working at all, let alone serve up the right content. I have also tried a CNAME record, to no effect. I have also tried creating a regular subdomain with a fixed name, which also does not work. Pre-configured subdomains DO work, like ftp.my.domain.tld or mail.my.domain.tld. I am clearly missing something here, but my hosting provider charges a small fortune for any support request not involving hardware physically burning down, so I'm hesitant to ask them. Any ideas?

    Read the article

  • PC powers off at random times

    - by Timo Huovinen
    Short Version After experiencing some problems with Mobo batteries my PC started to power off at random times, the power off is instant and sudden and does not restart afterwards, need help figuring out the cause. Facts: Powers off when PC is playing games Powers off when PC is idle Powers off when PC is in safe mode Powers off when PC is in BIOS Powers off when PC is booted through a Windows installation USB Replaced the motherboard battery several times Replaced the 650W PSU with a 750W PSU Replaced the RAM Swapped the RAM between slots Re-applied thermal paste to the CPU Checked if the motherboard touches the case Nothing is overclocked PC Specs PC specs: OS: Windows 7 Ultimate SP1 RAM: klingston 1333MHz 4GB stick CPU: AMD Phenom II x4 955 Mobo: Gigabyte 88GMA-UD2H rev 2.2 Motherboard battery: CR2032 3v HDD: 500GB Seagate ST3500418AS ATA Device Graphics: ATI/AMD Radeon HD 6870 Very Long version Around 10 months ago I built a brand new gaming PC. Around 6 months ago it's time setting in windows started resetting to the year 2010. I swapped the Motherboard battery for a new one of the exact same size and shape and voltage, and the problems disappeared...for around 2 weeks. Then the same problem happened again, time gets reset, I swapped the battery again, and the problem was gone for good and everything was great for about 3 months.. then another problem started happening, the PC started to power off suddenly and without warning at completely random times, sometimes the PC works for and hour, sometimes 5 minutes. So I read on the forums that it might be either the PSU or the motherboard Battery or RAM or HDD or the Graphics card or the CPU or the motherboard or the drivers or a Virus or Grounding issues, or something short circuiting, basically it can be anything... I spent some days researching, and decided to remove the possibility of a virus. I reset the CMOS, cleared all BIOS settings and reinstalled windows 7 after a full format of the HDD, but the random power off kept happening. I then disabled the restart on error option in windows and looked at the event log for error events, but they did not help me figure out the problem. Network list service depends on network location awareness the dependency group failed to start Source Kernel Power Event 41 Task Category 63 Source Disk Event ID 11 Task Category None The driver detected a controller error on device disk I took apart the PC, every little piece, re-applied some expensive thermal paste to the CPU, and double checked that none of the pieces are touching the PC case. The problem was gone, the PC no longer powered off randomly I re-attached the graphics card and all was good for 4 months... then the power off problem appeared again, but was happening at high intervals, the PC would shutdown once in 2 days on average, at random points in time, sometimes when it's idle all day long, sometimes when it's running CRYSIS 2. I checked the CPU temperature, because I know that AMD CPU's have a built in protection mechanism that switches off the PC if the CPU gets too hot, and the Temp was 50C system temp, and 45C CPU after running the PC all day long (I did not do tests to see if there are any temperature spikes, don't know how to do them) Originally the PSU that powered the PC was 650Watts and had one 4 pin cable to power the CPU, I replaced it with a new 750Watts PSU which has two 4 pin cables for the CPU, but the problem remained. I removed the graphics card and let the motherboard use the built in one, but the PC kept suddenly powering off at random times. I took apart the PC completely again, and re-applied thermal paste to the CPU, added lots of insulation, and checked for any type of short-circuit possibility again and again, but the problem remained. The problem was like that for some months. I replaced the Battery a couple of times over the time, changed lots of options in windows, and tried everything I could, but it kept powering off, so I stopped using the PC as much as I used to, just living with the random power offs from time to time, until a couple of days ago, when the power off happens almost immediately after powering on the PC. I replaced the RAM with a brand new one, but that did not help. Took apart the PC again, checked for anything anywhere that might cause it, found some small scratches on the very edge of the motherboard to the left of the PCI express x16 slot. This might cause the problem, I thought, but the scratch looks very superficial, not deep at all, and if the scratch did harm the motherboard, wouldn't it cause it to not start at all? And why did it start to power off a while ago, and then suddenly stop powering off? The scratches could not have vanished??? did chkdsk \d but it powered off when it was at 75% I removed the hard disks, the graphics card, while I fiddled with the BIOS settings, and suddenly the PC shut down while I was looking at the BIOS version. This makes me realize, it is not caused by: HDD, Windows, Drivers or the Graphics card I cleared the CMOS again, updated the BIOS from F5 to F6f beta, but that did not help, it might even seem that the PC powers off even sooner. The shutdown even happened to me while I booted through a windows 7 installation USB and was in the repair console. I removed one of the cables powering the CPU, now only one 4pin cable powers it, and it worked for 30mins after doing that, which makes me think that it's the CPU overheating, and because it gets less power, it overheats slower? The things that I am still considering: CPU overheating (does not seem to overheat, maybe false readings?) Motherboard short circuiting (faulty motherboard?) I desperately need some advice in what is faulty, is it a faulty Motherboard or an overheating CPU? or maybe something else? I have been breaking my head over this problem over a span of 6 months. I'm not sure if this is a good place to ask this question, if it is not, then tell me where I can get some experienced help. More info I have also discovered a mysterious piece that seems to have fallen out of the motherboard i119.photobucket.com/albums/o126/yurikolovsky/strangepiece.jpg What is it? Looks like each time that it powers off the datetime gets reset I also found another forum post tomshardware.co.uk/forum/… except I don't have Integrated PeripheralsUSB Keyboard Function option in BIOS :S Comments summary (asked by Random moderator) Q. tell me, if the computer restarts, is it immediately? Does it take a second and then restarts? Do you see (BSOD) or hear (PSU, short circuit) any suspicious when it happens? After reading trough it, it remains the mainboard that is faulty. – JohannesM A. Immediate power off, all the fans stop instantly, all the light turn off instantly, no sound or anything, and it remains off until I turn it back on. Thanks for the feedback, faulty motherboard is what I fear. Q. Try stress-testing the system with Prime95 and see if errors or shutdowns occur when the CPU is under full load. – speakr A. Prime95 heat stress test peaked CPU heat at 60C after 5mins, it powered off after 30mins of testing in the middle of the test with no errors, Prime95 Heat test or the stress-testing with low RAM usage (small or in-place FFTs) do not report errors while testing for 10-60 mins. The power off does not seem like it is affected by Prime95 at all Makes me wonder if it's a CPU or Motherboard issue at all. Q. I had similar random/intermittent problems with my old board. It gave one of a few different symptoms: keyboard and/or mouse would die and/or the RAM wouldn't work and/or it would shut down. It was in bad shape. One problems was that my old PSU had literally burned the connector on it (browned around the pins), another was that a broken lead inside the layers of the PCB would work sometimes if it happened to be hot or if I bent the board—by jamming a hunk of wood behind it. I managed to keep the board alive for several years, but eventually nothing I did would make it work correctly anymore. – Synetech A. I will try that as the last resort, ok? ;) Q. Have you tried a different power cord, surge protector, outlet (on a different circuit). It's worth a shot just to ensure it's not subpar wiring or a week circuit (dips in power may cause shutdown if the PSU can't pull enough juice from the wall). – Kyle A. yes, I attached the PC to an entirely different outlet on a different circuit and the problem persists. After connecting it to a different outlet after starting the PC it gave me 3 long beeps and 1 short one, then the PC immediately proceeded to boot up normally. Q. Re-check your mainboard manual and all PSU connections to your mainboard to be sure that nothing is missing (e.g. 12V ATX 4-pin/6-pin connector). If you can provoke shutdowns with Prime95, then consider buying new hardware -- a stable system should run Prime95 for 24h without any errors. Prime95 mentions errors in the log when they occur and gives a summary after the stress test was stopped manually (e.g. "0 errors, 0 warnings", if all is fine) – speakr A. Re-checked, there are no more PSU connectors that I can physically connect, except the one ATX 4-pin (there are 2 that power the CPU) that I disconnected on purpose, I have reconnected it but the problem persists. Q. With one PC I had a short curcuit. The power button on the front plate had its cables soldered, but not isolated, and the contacts were very close to the metal case. A heavier touch was enough to cause a shutdown. The PC's vibration could be enough – ott-- A. yes, it seems to switch off with even the lightest touch, I switched on the PC, then pulled out the front panel power cable that connects to the motherboard so the power button does not work anymore, after 5 mins of working like that, with the power button completely disconnected, just sitting idle, the PC powered off again, I don't think it's the power button. Q. I wonder if you dare to operate components without the case, that is remove motherboard, power, disk ( just put the motherboard on a wooden desk). Don't bend the adapters when running like that. – ott-- A. yes, I do dare to do that, but only tomorrow, too tired/late right now.

    Read the article

  • Hubs/switches taking out switches?

    - by Bart Silverstrim
    Here's the issue...we have a network with a lot of Cisco switches. Someone plugged in a hub on the network, and then we started seeing "weird" behavior; errors in communication between clients and servers, or network timeouts, dropping network connections, etc. It seemed that somehow that hub (or SOHO switch) was particularly freaking out our Cisco 3700 series switches. Disconnect that hub or netgear-type SOHO switch and things settled down again. We're in the process of trying to get a centralized logging server for SNMP and management, etc., to see if we can trap errors or narrow down when someone does this sort of thing without our knowledge because things seem to work, for the most part, without issue, we just get freaky oddball incidents on particular switches that don't seem to have any explanation until we find out someone decided to take matters into their own hands to expand available ports in their room. Without getting into procedure changes or locking down ports or "in our organization they'd be fired" answers, can someone explain why adding a small switch or hub, not necessarily a SOHO router (even a dumb hub apparently caused the 3700's to freak out) sending DHCP request out, will cause issues? The boss said it's because the Cisco's are getting confused because that rogue hub/switch is bridging multiple MAC's/IP's into one port on the Cisco switches and they just choke on that, but I thought their routing tables should be able to handle multiple machines coming into the port. Anyone see that behavior before and have a clearer explanation of what's happening? I'd like to know for future troubleshooting and better understanding that just waving my hand and saying "you just can't".

    Read the article

  • EEE PC dropbox server running 24/7

    - by microspino
    I'd like to create a mini dropbox and print server on a small soho network of 5 users (all of them use windows XP desktops). The device need to run 24/7 or at least 12/7 (I can accept just workday hours too but the other two options would be better). Dropbox mini server: I mean I will have a 90gb dropbox on every computer on my network LAN syncing with It and the one onto It syncing to the web. Print Server: I have Samsung SCX 4521F (fax/print/scan/copy), Samsung ML2010, HP Laser jet P1006, HP Color Laserjet CP1215, HP Office jet pro K8600, HP Design jet 500. All of them now are connected using little print servers and I want to get rid of them hooking everything to this mini server. The fax/print/scan/copy machine need to stay connected to a PC to make me able to use the software that comes with It. The mini server would save me on this too. Fax/Scan server: since I have the above mentioned fax/print/scan/copy machine I would like to make people use It from/to their computers through the mini server. I thought to a recent EEEBOX machine because I heard good things about ATOM cpus and because It seems that a recent BIOS version could switch It off and on autonomously. I'd like to listen some advice from You. Best of all would be: If You have something similar running for a long time If You disagree with this hardware choice and If You would suggest some other device. If You see any issues with my printing setup Anything else ;) My budget is from Zero (using right sw to build something on top on a old PC) to 500€ max.

    Read the article

  • How to use different scaling for every monitor?

    - by Mikael Koskinen
    One of the new features in Windows 8.1 is the new "Desktop display scaling", which allows user to configure scaling per monitor. I've been trying to get this working in preview but with no success. If I configure the scaling, it always affects all of my monitors. I have two monitors, the main one with a higher resolution and the secondary with "normal" resolution. The secondary monitor is used in portrait mode. I would like to configure the main monitor's scaling as the text is currently too small. Here's how things look at the configuration screen by default: Now if I adjust the scaling, click apply and do relogin, everything is bigger. On both of my monitors. I haven't clicked the "Let me choose one scaling level for all my displays", but still the slider seems to affect both of them. If I check the "Let me choose one scaling level", the UI changes to look similar to what we have in Windows 8: Still the problem persists. The scaling is applied to both of my monitors. So, it doesn't matter if I check the box or not, the scaling is always applied to all the displays. Any idea how I could get this to work in preview? I've read some comments which seem to indicate that this should work in preview, though Paul Thurrott mentioned at his Winsupersite article that he either didn't get this to work.

    Read the article

  • How should I monitor memory usage/performance in SunOS/Solaris?

    - by exhuma
    Last week we decided to add some SunOS (uname -a = SunOS bbs-sam-belair 5.10 Generic_127128-11 i86pc i386 i86pc) machines into our running munin instance. First off, the machines are pre-configured appliances, so, I want to avoid touching the system too much without supervision of the service provider. But adding it to munin was fairly easy by writing a small socket-service (if anyone is interested, I put it up on github: https://github.com/munin-monitoring/contrib/tree/master/tools/pypmmn) Yesterday, I implemented/adapted the required plugins for our machines. And here the questions start: First, I have not found a way to determine detailed memory usage values. I get the total memory by running prtconf | grep Memory, and the free memory using vmstat. Fiddling together a munin-plugin, gives me the following graph: This is pretty much uninformative. Compare this to the default plugin for linux nodes which has a lot more detail: Most importantly, this shows me how much memory is actually used by applications. So, first question: Is it possible to get detailed memory information on SunOS with the default system tools (i.e. not using top)? Onto the next puzzle: Seeing the graphs, I noticed activity in the "Paging in/out" graphs, even though the memory graph still has unused memory: Upon further investigation, I found out that df reports that /tmp is mounted on swap. Drilling around on the web, I understood that df will display swap, but in fact, it's mounted as a tmpfs. Now I don't know if this explains the swap activity. The default munin-plugin for solaris uses kstat -p -c misc -m cpu_stat to get these values. I find it already strange that this is using the cpu_stat module. So maybe I simply misinterpret the "paging" graphs? Second question: Do the paging graphs indicate that parts of the memory are paged to disk? Or is the activity caused by file operations in /tmp?

    Read the article

  • How do I create a wifi network bridge with qemu on OS X?

    - by a paid nerd
    I grabbed a small FreeBSD live CD and QEMU, and I'm trying to bridge my Mac OS X 10.8 wifi connection so that the guest OS is available on my LAN. However, the guest OS never gets a DHCP lease. This works perfectly with VirtualBox in their "bridged" network mode, so I know it can be done. I need to get it working with QEMU because VirtualBox doesn't support the architecture that I need for this project. Here's what I've done so far based on hours of googling: Installed TUNTAP for OS X Told OS X to supposedly forward all packets, even ARP: (NOTE: This doesn't appear to work.) $ sudo sysctl -w net.inet.ip.forwarding=1 $ sudo sysctl -w net.link.ether.inet.proxyall=1 $ sudo sysctl -w net.inet.ip.fw.enable=1 Created a bridge: $ sudo ifconfig bridge0 create $ sudo ifconfig bridge0 addm en0 addm tap0 $ sudo ifconfig bridge0 up $ ifconfig bridge0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether ac:de:xx:xx:xx:xx Configuration: priority 0 hellotime 0 fwddelay 0 maxage 0 ipfilter disabled flags 0x2 member: en0 flags=3<LEARNING,DISCOVER> port 4 priority 0 path cost 0 member: tap0 flags=3<LEARNING,DISCOVER> port 8 priority 0 path cost 0 tap0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 ether ca:3d:xx:xx:xx:xx open (pid 88244) Started tcpdump with -I in the hopes that it enables promiscuous mode on the wifi device: $ sudo tcpdump -In -i en0 Run QEMU using the bridged network instructions: $ qemu-system-x86_64 -cdrom mfsbsd-9.2-RELEASE-amd64.iso -m 1024 \ -boot d -net nic -net tap,ifname=tap0,script=no,downscript=no But the guest system never gets a DHCP lease: If I tcpdump -ni tap0, I see lots of traffic from the wireless network. But if I tcpdump -ni en0, I don't see any DHCP traffic from the QEMU guest OS. Any ideas? Update 1: I tried sudo defaults write "/Library/Preferences/SystemConfiguration/com.apple.Boot" "Kernel Flags" "net.inet.ip.scopedroute=0" and rebooting per this mailing list suggestion, but this didn't help. In fact, it made VirtualBox bridged mode stop working.

    Read the article

  • Using Round Robin DNS on simple VPN setup

    - by dannymcc
    We have two internet connections which are load balanced to share the load between the two. We set this up after one of the internet provider proved to be less than reliable but great speed and latency wise when it is working. We'd rather utilise both connections as much as possible rather than leave one idle until the other drops out. We have a number of remote workers who occasionally need to connect via VPN from their laptops or iPads, we also have a small number of permanent LAN to LAN tunnels running from smaller branches. Originally we only had one internet connection and used one of our static IP addresses for all VPN users. Now that we have two internet connections running all of the time I am trying to make sure that the VPN is available to our team regardless of which connection drops. So my solution is to create two A records for our domain name with a value of vpn. and the two static IP addresses from each peer. Is this a sensible way of achieving this? Should I expect higher latency due to packets being lost if one peer fails and some packets still get routed to it anyway? A brief mockup of the setup I have:

    Read the article

  • Why are group policy preference drive mappings not applied to the domain administrator account?

    - by Saariko
    I have a working policy on my entire domain. I just found out, when logging with the domain administrator, that this policy is not applied (EDIT: Running : gpresult shows that the GPO's are applied - but, this GPO is for Drive Mappings, and the actual drive mappings are NOT shown) The administrator account - does not have any login script on his profile tab. To note: The mappings were applied before the GPO with a login script using the : net use ... command - all was working perfectly and correctly for the domain administrator user as well - That removes sharing and security problem (IMO) My GPO's are mainly small/atomic settings: single GPO to handle each settings: UAC, Firewall, printers. GPO status for the object is enabled That's an overview of the Drive Maps: Reading on MS support site, I checked the delegation tab, and it is marked as applied to domain and enterprise admins. Every user gets these policies correctly. The OU that is set is the root of the domain. (for testing purpose - I did that to eliminate hierarchy issues - did not help) Block Inheritance is disabled. (never used it anyway) GPO link GPO Security Filterings

    Read the article

< Previous Page | 364 365 366 367 368 369 370 371 372 373 374 375  | Next Page >