Search Results

Search found 20963 results on 839 pages for 'video game'.

Page 368/839 | < Previous Page | 364 365 366 367 368 369 370 371 372 373 374 375  | Next Page >

  • GameStateManagement and inputs not being recognized

    - by Dave Voyles
    EDIT: I've removed a bit of code from the input class to make this more readable, and updated my StartScreen class, which is now at the bottom. I have the same issues though, but they are explained in my comments on the bottom of this page. It won't let me paste my additional code here (the format comes out crazy), so I've linked to pastebin with the code pastebin I've been trying to implement the MS provided GameStateManagement sample with my game, but it has proven a bit difficult. Really, I'm using Oneksoft's Starter Kit, which uses the MS provided sample, so they are identical, except for my splash screen. I'm able to get the splash screen to launch, where it informs the player to press A to advance the screen, but this doesn't seem to accept any of my inputs. I’ve also added Console.Writeline(“Pressing A”) under the IsMenuPressed method in Input.cs to verify that it is getting called, but for some reason it is constantly spamming my log, rather than just appearing each time I press it. Not sure why this is happening. I have a bit too much code to post it all here, so I’ve attached a link to my .rar with my classes, but I’ll also leave a bit here which I thinkmay be applicable. https://www.dropbox.com/sh/6ek4uru2jc2ch0k/JTeBWN_3PQ What do you guys think the issue is? namespace Pong { public class Input { public const int MaxInputs = 4; public readonly KeyboardState[] CurrentKeyboardState; public readonly GamePadState[] CurrentGamePadState; public KeyboardState[] LastKeyboardState; public GamePadState[] LastGamePadState; public readonly bool[] GamePadWasConnected; public Input() { // Get input state CurrentKeyboardState = new KeyboardState[MaxInputs]; CurrentGamePadState = new GamePadState[MaxInputs]; // Preserving last states to check for isKeyUp events LastKeyboardState = CurrentKeyboardState; LastGamePadState = CurrentGamePadState; } /// <summary> /// Checks for a "menu select" input action. /// The controllingPlayer parameter specifies which player to read input for. /// If this is null, it will accept input from any player. When the action /// is detected, the output playerIndex reports which player pressed it. /// </summary> public bool IsMenuSelect(PlayerIndex? controllingPlayer, out PlayerIndex playerIndex) { Console.WriteLine("Pressing A"); return IsNewKeyPress(Keys.Space, controllingPlayer, out playerIndex) || IsNewKeyPress(Keys.Enter, controllingPlayer, out playerIndex) || IsNewButtonPress(Buttons.A, controllingPlayer, out playerIndex) || IsNewButtonPress(Buttons.Start, controllingPlayer, out playerIndex); } /// <summary> /// Checks for a "menu cancel" input action. /// The controllingPlayer parameter specifies which player to read input for. /// If this is null, it will accept input from any player. When the action /// is detected, the output playerIndex reports which player pressed it. /// </summary> public bool IsMenuCancel(PlayerIndex? controllingPlayer, out PlayerIndex playerIndex) { return IsNewKeyPress(Keys.Escape, controllingPlayer, out playerIndex) || IsNewButtonPress(Buttons.B, controllingPlayer, out playerIndex) || IsNewButtonPress(Buttons.Back, controllingPlayer, out playerIndex); }

    Read the article

  • Difficulties with rotation of a sprite

    - by Andy
    I want to program a dolphin that jumps and rotates like a real dolphin. Jumping is not the problem, but I don't know how to make the rotation. My dolphin always rests in the same angle while it jumps. But I want that it changes the rotation during the jump, like a real dolphin does. How can I improve the rotation? public class Game1 : Microsoft.Xna.Framework.Game { GraphicsDeviceManager graphics; SpriteBatch spriteBatch; Texture2D image, water; float Gravity = 5.0F; float Acceleration = 20.0F; Vector2 Position = new Vector2(1200,720); Vector2 Velocity; float rotation = 0; SpriteEffects flip; Vector2 Speed = new Vector2(0, 0); public Game1() { graphics = new GraphicsDeviceManager(this); Content.RootDirectory = "Content"; graphics.PreferredBackBufferWidth = 1280; graphics.PreferredBackBufferHeight = 720; } protected override void Initialize() { base.Initialize(); } protected override void LoadContent() { spriteBatch = new SpriteBatch(GraphicsDevice); image = Content.Load<Texture2D>("cartoondolphin"); water = Content.Load<Texture2D>("background"); flip = SpriteEffects.None; } protected override void Update(GameTime gameTime) { float VelocityX = 0f; float VelocityY = 0f; float time = (float)gameTime.ElapsedGameTime.TotalSeconds; KeyboardState kbState = Keyboard.GetState(); if(kbState.IsKeyDown(Keys.Left)) { rotation = 0; flip = SpriteEffects.None; VelocityX += -5f; } if(kbState.IsKeyDown(Keys.Right)) { rotation = 0; flip = SpriteEffects.FlipHorizontally; VelocityX += 5f; } // jump if the dolphin is under water if(Position.Y >= 670) { if (kbState.IsKeyDown(Keys.A)) { if (flip == SpriteEffects.None) { rotation = 45; VelocityY += 40f; } else { rotation = -45; VelocityY += 40f; } } } else { VelocityY += -10f; } float deltaY = 0; float deltaX = 0; deltaY = Gravity * (float)gameTime.ElapsedGameTime.TotalSeconds; deltaX += VelocityX * (float)gameTime.ElapsedGameTime.TotalSeconds * Acceleration; deltaY += -VelocityY * (float)gameTime.ElapsedGameTime.TotalSeconds * Acceleration; Speed = new Vector2(Speed.X + deltaX, Speed.Y + deltaY); Position += Speed * (float)gameTime.ElapsedGameTime.TotalSeconds; Velocity.X = 0; if (Position.Y + image.Height/2 > graphics.PreferredBackBufferHeight) Position.Y = graphics.PreferredBackBufferHeight - image.Height/2; base.Update(gameTime); } protected override void Draw(GameTime gameTime) { GraphicsDevice.Clear(Color.CornflowerBlue); spriteBatch.Begin(); spriteBatch.Draw(water, new Rectangle(0, graphics.PreferredBackBufferHeight -100, graphics.PreferredBackBufferWidth, 100), Color.White); spriteBatch.Draw(image, Position, null, Color.White, MathHelper.ToRadians(rotation), new Vector2(image.Width / 2, image.Height / 2), 1, flip, 1); spriteBatch.End(); base.Draw(gameTime); } }

    Read the article

  • XNA - 3D AABB collision detection and response

    - by fastinvsqrt
    I've been fiddling around with 3D AABB collision in my voxel engine for the last couple of days, and every method I've come up with thus far has been almost correct, but each one never quite worked exactly the way I hoped it would. Currently what I do is get two bounding boxes for my entity, one modified by the X translation component and the other by the Z component, and check if each collides with any of the surrounding chunks (chunks have their own octrees that are populated only with blocks that support collision). If there is a collision, then I cast out rays into that chunk to get the shortest collision distance, and set the translation component to that distance if the component is greater than the distance. The problem is that sometimes collisions aren't even registered. Here's a video on YouTube that I created showing what I mean. I suspect the problem may be with the rays that I cast to get the collision distance not being where I think they are, but I'm not entirely sure what would be wrong with them if they are indeed the problem. Here is my code for collision detection and response in the X direction (the Z direction is basically the same): // create the XZ offset vector Vector3 offsXZ = new Vector3( ( _translation.X > 0.0f ) ? SizeX / 2.0f : ( _translation.X < 0.0f ) ? -SizeX / 2.0f : 0.0f, 0.0f, ( _translation.Z > 0.0f ) ? SizeZ / 2.0f : ( _translation.Z < 0.0f ) ? -SizeZ / 2.0f : 0.0f ); // X physics BoundingBox boxx = GetBounds( _translation.X, 0.0f, 0.0f ); if ( _translation.X > 0.0f ) { foreach ( Chunk chunk in surrounding ) { if ( chunk.Collides( boxx ) ) { float dist = GetShortestCollisionDistance( chunk, Vector3.Right, offsXZ ) - 0.0001f; if ( dist < _translation.X ) { _translation.X = dist; } } } } else if ( _translation.X < 0.0f ) { foreach ( Chunk chunk in surrounding ) { if ( chunk.Collides( boxx ) ) { float dist = GetShortestCollisionDistance( chunk, Vector3.Left, offsXZ ) - 0.0001f; if ( dist < -_translation.X ) { _translation.X = -dist; } } } } And here is my implementation for GetShortestCollisionDistance: private float GetShortestCollisionDistance( Chunk chunk, Vector3 rayDir, Vector3 offs ) { int startY = (int)( -SizeY / 2.0f ); int endY = (int)( SizeY / 2.0f ); int incY = (int)Cube.Size; float dist = Chunk.Size; for ( int y = startY; y <= endY; y += incY ) { // Position is the center of the entity's bounding box Ray ray = new Ray( new Vector3( Position.X + offs.X, Position.Y + offs.Y + y, Position.Z + offs.Z ), rayDir ); // Chunk.GetIntersections(Ray) returns Dictionary<Block, float?> foreach ( var pair in chunk.GetIntersections( ray ) ) { if ( pair.Value.HasValue && pair.Value.Value < dist ) { dist = pair.Value.Value; } } } return dist; } I realize some of this code can be consolidated to help with speed, but my main concern right now is to get this bit of physics programming to actually work.

    Read the article

  • Why is the framerate (fps) capped at 60?

    - by dennmat
    ISSUE I recently moved a project from my laptop to my desktop(machine info below). On my laptop the exact same code displays the fps(and ms/f) correctly. On my desktop it does not. What I mean by this is on the laptop it will display 300 fps(for example) where on my desktop it will show only up to 60. If I add 100 objects to the game on the laptop I'll see my frame rate drop accordingly; the same test on the desktop results in no change and the frames stay at 60. It takes a lot(~300) entities before I'll see a frame drop on the desktop, then it will descend. It seems as though its "theoretical" frames would be 400 or 500 but will never actually get to that and only do 60 until there's too much to handle at 60. This 60 frame cap is coming from no where. I'm not doing any frame limiting myself. It seems like something external is limiting my loop iterations on the desktop, but for the last couple days I've been scratching my head trying to figure out how to debug this. SETUPS Desktop: Visual Studio Express 2012 Windows 7 Ultimate 64-bit Laptop: Visual Studio Express 2010 Windows 7 Ultimate 64-bit The libraries(allegro, box2d) are the same versions on both setups. CODE Main Loop: while(!abort) { frameTime = al_get_time(); if (frameTime - lastTime >= 1.0) { lastFps = fps/(frameTime - lastTime); lastTime = frameTime; avgMspf = cumMspf/fps; cumMspf = 0.0; fps = 0; } /** DRAWING/UPDATE CODE **/ fps++; cumMspf += al_get_time() - frameTime; } Note: There is no blocking code in the loop at any point. Where I'm at My understanding of al_get_time() is that it can return different resolutions depending on the system. However the resolution is never worse than seconds, and the double is represented as [seconds].[finer-resolution] and seeing as I'm only checking for a whole second al_get_time() shouldn't be responsible. My project settings and compiler options are the same. And I promise its the same code on both machines. My googling really didn't help me much, and although technically it's not that big of a deal. I'd really like to figure this out or perhaps have it explained, whichever comes first. Even just an idea of how to go about figuring out possible causes, because I'm out of ideas. Any help at all is greatly appreciated. EDIT: Thanks All. For any others that find this to disable vSync(windows only) in opengl: First get "wglext.h". It's all over the web. Then you can use a tool like GLee or just write your own quick extensions manager like: bool WGLExtensionSupported(const char *extension_name) { PFNWGLGETEXTENSIONSSTRINGEXTPROC _wglGetExtensionsStringEXT = NULL; _wglGetExtensionsStringEXT = (PFNWGLGETEXTENSIONSSTRINGEXTPROC) wglGetProcAddress("wglGetExtensionsStringEXT"); if (strstr(_wglGetExtensionsStringEXT(), extension_name) == NULL) { return false; } return true; } and then create and setup your function pointers: PFNWGLSWAPINTERVALEXTPROC wglSwapIntervalEXT = NULL; PFNWGLGETSWAPINTERVALEXTPROC wglGetSwapIntervalEXT = NULL; if (WGLExtensionSupported("WGL_EXT_swap_control")) { // Extension is supported, init pointers. wglSwapIntervalEXT = (PFNWGLSWAPINTERVALEXTPROC) wglGetProcAddress("wglSwapIntervalEXT"); // this is another function from WGL_EXT_swap_control extension wglGetSwapIntervalEXT = (PFNWGLGETSWAPINTERVALEXTPROC) wglGetProcAddress("wglGetSwapIntervalEXT"); } Then just call wglSwapIntervalEXT(0) to disable vSync and 1 to enable vSync. I found the reason this is windows only is that openGl actually doesn't deal with anything other than rendering it leaves the rest up to the OS and Hardware. Thanks everyone saved me a lot of time!

    Read the article

  • Java Dragging an object from one area to another [on hold]

    - by user50369
    Hello I have a game where you drag bits of food around the screen. I want to be able to click on an ingredient and drag it to another part of the screen where I release the mouse. I am new to java so I do not really know how to do this please help me Here is me code. This is the class with the mouse listeners in it: public void mousePressed(MouseEvent e) { if (e.getButton() == MouseEvent.BUTTON1) { Comp.ml = true; // placing if (manager.title == true) { if (title.r.contains(Comp.mx, Comp.my)) { title.overview = true; } else if (title.r1.contains(Comp.mx, Comp.my)) { title.options = true; } else if (title.r2.contains(Comp.mx, Comp.my)) { System.exit(0); } } if (manager.option == true) { optionsMouse(e); } mouseinventory(e); } else if (e.getButton() == MouseEvent.BUTTON3) { Comp.mr = true; } } private void mouseinventory(MouseEvent e) { if (e.getButton() == MouseEvent.BUTTON1) { } else if (e.getButton() == MouseEvent.BUTTON1) { } } @Override public void mouseReleased(MouseEvent e) { if (e.getButton() == MouseEvent.BUTTON1) { Comp.ml = false; } else if (e.getButton() == MouseEvent.BUTTON3) { Comp.mr = false; } } @Override public void mouseDragged(MouseEvent e) { for(int i = 0; i < overview.im.ing.toArray().length; i ++){ if(overview.im.ing.get(i).r.contains(Comp.mx,Comp.my)){ overview.im.ing.get(i).newx = Comp.mx; overview.im.ing.get(i).newy = Comp.my; overview.im.ing.get(i).dragged = true; }else{ overview.im.ing.get(i).dragged = false; } } } @Override public void mouseMoved(MouseEvent e) { Comp.mx = e.getX(); Comp.my = e.getY(); // System.out.println("" + Comp.my); } This is the class called ingredient public abstract class Ingrediant { public int x,y,id,lastx,lasty,newx,newy; public boolean removed = false,dragged = false; public int width; public int height; public Rectangle r = new Rectangle(x,y,width,height); public Ingrediant(){ r = new Rectangle(x,y,width,height); } public abstract void tick(); public abstract void render(Graphics g); } and this is a class which extends ingredient called hagleave public class HagLeave extends Ingrediant { private Image img; public HagLeave(int x, int y, int id) { this.x = x; this.y = y; this.newx = x; this.newy = y; this.id = id; width = 75; height = 75; r = new Rectangle(x,y,width,height); } public void tick() { r = new Rectangle(x,y,width,height); if(!dragged){ x = newx; y = newy; } } public void render(Graphics g) { ImageIcon i2 = new ImageIcon("res/ingrediants/hagleave.png"); img = i2.getImage(); g.drawImage(img, x, y, null); g.setColor(Color.red); g.drawRect(r.x, r.y, r.width, r.height); } } The arraylist is in a class called ingrediantManager: public class IngrediantsManager { public ArrayList<Ingrediant> ing = new ArrayList<Ingrediant>(); public IngrediantsManager(){ ing.add(new HagLeave(100,200,1)); ing.add(new PigHair(70,300,2)); ing.add(new GiantsToe(100,400,3)); } public void tick(){ for(int i = 0; i < ing.toArray().length; i ++){ ing.get(i).tick(); if(ing.get(i).removed){ ing.remove(i); i--; } } } public void render(Graphics g){ for(int i = 0; i < ing.toArray().length; i ++){ ing.get(i).render(g); } } }

    Read the article

  • Slide 2d Vector to destination over a period of time

    - by SchautDollar
    I am making a library of GUI controls for games I make with XNA. I am currently developing the library as I make a game so I can test the features and find errors/bugs and hopefully smash them right away. My current issue is on a slide feature I want to implement for my base class that all controls inherit. My goal is to get the control to slide to a specified point over a specified amount of time. Here is the #region containing the code #region Slide private bool sliding; private Vector2 endPoint; private float slideTimeLeft; private float speed; private bool wasEnabled; private Vector2 slideDirection; private float slideDistance; public void Slide(Vector2 startPoint, Vector2 endPoint, float slideTime) { this.location = startPoint; Slide(endPoint,slideTime); } public void Slide(Vector2 endPoint, float slideTime) { this.wasEnabled = this.enabled; this.enabled = false; this.sliding = true; Vector2 tempLength = endPoint - this.location; this.slideDistance = tempLength.Length(); //Was this.slideDistance = (float)Math.Sqrt(tempLength.LengthSquared()); this.speed = slideTime / this.slideDistance; this.endPoint = endPoint; this.slideTimeLeft = slideTime; } private void UpdateSlide(GameTime gameTime) { if (this.sliding) { this.slideTimeLeft -= gameTime.ElapsedGameTime.Milliseconds; if (this.slideTimeLeft >= 0 ) { if ((this.endPoint-this.location).Length() != 0){//Was if (this.endPoint.LengthSquared() > 0 || this.location.LengthSquared() > 0) { this.slideDirection = Vector2.Normalize(this.endPoint - this.location); } this.location += this.slideDirection * speed * gameTime.ElapsedGameTime.Milliseconds;//This is where I believe the issue is, but I'm not sure. It seems right to me... (Even though it doesn't work) } else { this.enabled = this.wasEnabled; this.location = this.endPoint;//After time, the controls position will get set to be the endpoint. this.sliding = false; } } } #endregion this.location is the location of the control elsewhere defined in the class. I have looked at this blog as a huge reference and have googled around quite and have looked on many forums but can't find anything that shows how to implement it. Please and Thanks for your time! EDIT: I have switched this line "this.location += this.slideDirection * speed * gameTime.ElapsedGameTime.Milliseconds;" several times to see what it does. My issue is getting the control to smoothly move to the end location. It moves after the time has expired, but It doesn't move other then that except flash in my face. EDIT2: I have used the first slide method with 3 parameters and it works except it doesn't do it in a period of time and once it gets to its destination, it starts moving randomly towards the previous location and the end location.

    Read the article

  • Silverlight Cream for March 25, 2010 -- #820

    - by Dave Campbell
    In this Issue: René Schulte, Jeremy Likness, Hassan, Victor Gaudioso, SilverLaw, Mike Taulty, Phani Raj, Tim Heuer, Christian Schormann, Brad Abrams, David Anson, Diptimaya Patra, and Daniel Vaughan. Shoutouts: Last week, Koen Zwikstra announced Silverlight Spy at MIX10 Anand Iyer announced this for students on the Windows Team Blog: Be a Windows Phone 7 “Rockstar” Justin Angel blogged that Silverlight Isn't Fully Cross-Platform ... let him know if you think it's a yawn or important. On behalf of SilverlightShow, Cigdem Patlak posted MIX10: Laurent Bugnion on Silverlight adoption, WP7 and the EcoContest From SilverlightCream.com: Coding4Fun - Silverlight Real Time Face Detection René Schulte has a Coding 4 Fun article posted on facial recognition. Who better to be manipulating graphics like this than René? Sequential Asynchronous Workflows Part 2: Simplified Jeremy Likness follows up his previous post with another one that is 'simplified'. Remember his previous post began with a post on the Silverlight.net forum and Rob Eisenburg's MVVM presentation from MIX10 Windows Phone 7 Video Tutorial Hassan has a new video up on his AfricanGeek site, and that's a continuation of his previous WP7 video tutorial, adding a listbox and databinding it to the selected index of another listbox. The Los Angeles Silverlight Usergorup will be Streaming its March Meeting LIVE in Silverlight – Tonight! Victor Gaudioso used his Live Streaming knowledge to stream his User Group meeting last night from LA where Michael Washington presented on MVVM followed by Victor himself. That was last night. Today he has a couple of the videos up to view. Shining 3D Font Design - Silverlight 3 SilverLaw has a "Shining 3D Font" tutorial up, and a video on it here: New Video: How to create a 3D effect on a Silverlight 3 Textblock ... this is also available in the Expression Gallery. Silverlight 4 RC – Signing trusted apps with home made certificates Mike Taulty has a post up about building a hand-rolled cert to test out the XAP signing features, and then gives a nod to John Papa with a link to the Silverlight White Paper I've posted about before, because this info is in there as well. Developing a Windows Phone 7 Application that consumes OData Phani Raj has a tutorial up on consuming the NetFlix OData catalog on the WP7 emulator ... now *that* is cool! Make your Silverlight applications Speak to you with Microsoft Translator Tim Heuer used Silverlight to demonstrate Microsoft Translator as a speech synthesis tool using the Speak API included ... pretty cool, Tim ... lots of external links and code. Blend 4: About Path Layout, Sidebar – More About ListBox Than You Ever Wanted To Know Christian Schormann has another outstanding tutorial up on the ListBox and PathLayout in Expression Blend ... just check out the screen shots and you'll wanna read it! Silverlight 4 + RIA Services: Ready for Business: Updating Data in the Client This is the continuation of Brad Abrams' series on WCF RIA Services and is a tutorial on setting up to deal with updating the data. Tip: The CLR wrapper for a DependencyProperty should do its job and nothing more David Anson is posting some "Development Tips", and this is the first ... discussing making sure your DependencyProperty CLR wrapper stays on point... Create and Apply Theme Silverlight Application Diptimaya Patra has a tutorial up on creating and using themes. He states that "Themes are nothing but some predefined styles" ... check it out and see if it's really that easy :) Building a Windows Phone 7 Puzzle Game Daniel Vaughan has a great post up starting with installing all the tools and ending with a maze game for WP7 using XNA for sound... this is the first I've seen that integrates XNA (I think). Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone    MIX10

    Read the article

  • 2d movement solution

    - by Phil
    Hi! I'm making a simple top-down tank game on the ipad where the user controls the movement of the tank with the left "joystick" and the rotation of the turret with the right one. I've spent several hours just trying to get it to work decently but now I turn to the pros :) I have two referencial objects, one for the movement and one for the rotation. The referencial objects always stay max two units away from the tank and I use them to tell the tank in what direction to move. I chose this approach to decouple movement and rotational behaviour from the raw input of the joysticks, I believe this will make it simpler to implement whatever behaviour I want for the tank. My problem is 1; the turret rotates the long way to the target. With this I mean that the target can be -5 degrees away in rotation and still it rotates 355 degrees instead of -5 degrees. I can't figure out why. The other problem is with the movement. It just doesn't feel right to have the tank turn while moving. I'd like to have a solution that would work as well for the AI as for the player. A blackbox function for the movement where the player only specifies in what direction it should move and it moves there under the constraints that are imposed on it. I am using the standard joystick class found in the Unity iPhone package. This is the code I'm using for the movement: public class TankFollow : MonoBehaviour { //Check angle difference and turn accordingly public GameObject followPoint; public float speed; public float turningSpeed; void Update() { transform.position = Vector3.Slerp(transform.position, followPoint.transform.position, speed * Time.deltaTime); //Calculate angle var forwardA = transform.forward; var forwardB = (followPoint.transform.position - transform.position); var angleA = Mathf.Atan2(forwardA.x, forwardA.z) * Mathf.Rad2Deg; var angleB = Mathf.Atan2(forwardB.x, forwardB.z) * Mathf.Rad2Deg; var angleDiff = Mathf.DeltaAngle(angleA, angleB); //print(angleDiff.ToString()); if (angleDiff > 5) { //Rotate to transform.Rotate(new Vector3(0, (-turningSpeed * Time.deltaTime),0)); //transform.rotation = new Quaternion(transform.rotation.x, transform.rotation.y + adjustment, transform.rotation.z, transform.rotation.w); } else if (angleDiff < 5) { transform.Rotate(new Vector3(0, (turningSpeed * Time.deltaTime),0)); //transform.rotation = new Quaternion(transform.rotation.x, transform.rotation.y + adjustment, transform.rotation.z, transform.rotation.w); } else { } transform.position = new Vector3(transform.position.x, 0, transform.position.z); } } And this is the code I'm using to rotate the turret: void LookAt() { var forwardA = -transform.right; var forwardB = (toLookAt.transform.position - transform.position); var angleA = Mathf.Atan2(forwardA.x, forwardA.z) * Mathf.Rad2Deg; var angleB = Mathf.Atan2(forwardB.x, forwardB.z) * Mathf.Rad2Deg; var angleDiff = Mathf.DeltaAngle(angleA, angleB); //print(angleDiff.ToString()); if (angleDiff - 180 > 1) { //Rotate to transform.Rotate(new Vector3(0, (turretSpeed * Time.deltaTime),0)); //transform.rotation = new Quaternion(transform.rotation.x, transform.rotation.y + adjustment, transform.rotation.z, transform.rotation.w); } else if (angleDiff - 180 < -1) { transform.Rotate(new Vector3(0, (-turretSpeed * Time.deltaTime),0)); //transform.rotation = new Quaternion(transform.rotation.x, transform.rotation.y + adjustment, transform.rotation.z, transform.rotation.w); print((angleDiff - 180).ToString()); } else { } } Since I want the turret reference point to turn in relation to the tank (when you rotate the body, the turret should follow and not stay locked on since it makes it impossible to control when you've got two thumbs to work with), I've made the TurretFollowPoint a child of the Turret object, which in turn is a child of the body. I'm thinking that I'm making it too difficult for myself with the reference points but I'm imagining that it's a good idea. Please be honest about this point. So I'll be grateful for any help I can get! I'm using Unity3d iPhone. Thanks!

    Read the article

  • Changing enum in a different class for screen

    - by user2434321
    I'm trying to make a start menu for my game and my code uses Enum's to moniter the screen state. Now i want to change the screenstate declared in the main class, in my Background class Screen screen = new Screen(); is declared in the Game1 class Background(ref screen); This is in the update method for the Background Class KeyboardState keystate = Keyboard.GetState(); switch (screen) { case Screen.Start: if (isPressed && keystate.IsKeyUp(Keys.Up) && keystate.IsKeyUp(Keys.Down) && keystate.IsKeyUp(Keys.Enter)) { isPressed = false; } if (keystate.IsKeyDown(Keys.Down) && isPressed != true) { if (menuState == MenuState.Options) menuState = MenuState.Credits; if (menuState == MenuState.Play) menuState = MenuState.Options; isPressed = true; } if (keystate.IsKeyDown(Keys.Up) && isPressed != true) { if (menuState == MenuState.Options) menuState = MenuState.Play; if (menuState == MenuState.Credits) menuState = MenuState.Options; isPressed = true; } switch (menuState) { case MenuState.Play: arrowRect.X = 450; arrowRect.Y = 220; if (keystate.IsKeyDown(Keys.Enter) && isPressed != true) screen = Screen.Play; break; case MenuState.Options: arrowRect.X = 419; arrowRect.Y = 340; if (keystate.IsKeyDown(Keys.Enter) && isPressed != true) screen = Screen.Options; break; case MenuState.Credits: arrowRect.X = 425; arrowRect.Y = 460; if (keystate.IsKeyDown(Keys.Enter) && isPressed != true) screen = Screen.Credits; break; } break; } } For some reason when I play this and I hit the enter button the Background class's screen is changed but the main class's screen isn't how can i change this? EDIT 1* class Background { private Texture2D background; private Rectangle backgroundRect; private Texture2D arrow; private Rectangle arrowRect; private Screen screen; private MenuState menuState; private bool isPressed = false; public Screen getScreenState(ref Screen screen) { this.screen = screen; return this.screen; } public Background(ref Screen screen) { this.screen = screen; } public void Update() { KeyboardState keystate = Keyboard.GetState(); switch (screen) { case Screen.Start: if (isPressed && keystate.IsKeyUp(Keys.Up) && keystate.IsKeyUp(Keys.Down) && keystate.IsKeyUp(Keys.Enter)) { isPressed = false; } if (keystate.IsKeyDown(Keys.Down) && isPressed != true) { if (menuState == MenuState.Options) menuState = MenuState.Credits; if (menuState == MenuState.Play) menuState = MenuState.Options; isPressed = true; } if (keystate.IsKeyDown(Keys.Up) && isPressed != true) { if (menuState == MenuState.Options) menuState = MenuState.Play; if (menuState == MenuState.Credits) menuState = MenuState.Options; isPressed = true; } switch (menuState) { case MenuState.Play: arrowRect.X = 450; arrowRect.Y = 220; if (keystate.IsKeyDown(Keys.Enter) && isPressed != true) screen = Screen.Play; break; case MenuState.Options: arrowRect.X = 419; arrowRect.Y = 340; if (keystate.IsKeyDown(Keys.Enter) && isPressed != true) screen = Screen.Options; break; case MenuState.Credits: arrowRect.X = 425; arrowRect.Y = 460; if (keystate.IsKeyDown(Keys.Enter) && isPressed != true) screen = Screen.Credits; break; } break; case Screen.Pause: break; case Screen.Over: break; } } public void LoadStartContent(ContentManager Content, GraphicsDeviceManager graphics) { background = Content.Load<Texture2D>("startBackground"); arrow = Content.Load<Texture2D>("arrow"); backgroundRect = new Rectangle(0, 0, graphics.GraphicsDevice.Viewport.Width, graphics.GraphicsDevice.Viewport.Height); arrowRect = new Rectangle(450, 225, arrow.Width, arrow.Height); screen = Screen.Start; } public void LoadPlayContent(ContentManager Content, GraphicsDeviceManager graphics) { background = Content.Load<Texture2D>("Background"); backgroundRect = new Rectangle(0, 0, graphics.GraphicsDevice.Viewport.Width, graphics.GraphicsDevice.Viewport.Height); screen = Screen.Play; } public void LoadOverContent(ContentManager Content, GraphicsDeviceManager graphics) { } public void Draw(SpriteBatch spritebatch) { if (screen == Screen.Start) { spritebatch.Draw(background, backgroundRect, Color.White); spritebatch.Draw(arrow, arrowRect, Color.White); } else spritebatch.Draw(background, backgroundRect, Color.White); } } Thats my background class!

    Read the article

  • XNA Level Select Menu

    - by user29901
    I'll try to explain this the best I can. I'm trying to create a level select menu for a game I'm making. The menu is basically a group of blocks numbered 1-16, similar to something like the Angry Birds menu. What I've done is created a cursor, basically just an outline to surround a block, that the user can move to select what level they want to play. What I want it do is move from block to block instead of simply moving around on the X and Y axes as it does now. So my question is, how can I get the cursor (highLight in the below code) to move from block to block(destinationRectangle1 etc. in the code)? /// Field for the "cursor" Vector2 highLightPos = new Vector2(400, 200); ///This is the Update code KeyboardState keyBoardState = Keyboard.GetState(); if (keyBoardState.IsKeyDown(Keys.Up)) highLightPos.Y--; if (keyBoardState.IsKeyDown(Keys.Down)) highLightPos.Y++; if (keyBoardState.IsKeyDown(Keys.Right)) highLightPos.X++; if (keyBoardState.IsKeyDown(Keys.Left)) highLightPos.X--; /// This is the draw code SpriteBatch spriteBatch = ScreenManager.SpriteBatch; Rectangle screenRectangle = new Rectangle(0, 0, 1280, 720); Rectangle destinationRectangle1 = new Rectangle(400, 200, 64, 64); Rectangle frameRectangle1 = new Rectangle(0, 0, 64, 64); Rectangle destinationRectangle2 = new Rectangle(500, 200, 64, 64); Rectangle frameRectangle2 = new Rectangle(64, 0, 64, 64); Rectangle destinationRectangle3 = new Rectangle(600, 200, 64, 64); Rectangle frameRectangle3 = new Rectangle(128, 0, 64, 64); Rectangle destinationRectangle4 = new Rectangle(700, 200, 64, 64); Rectangle frameRectangle4 = new Rectangle(192, 0, 64, 64); Rectangle destinationRectangle5 = new Rectangle(800, 200, 64, 64); Rectangle frameRectangle5 = new Rectangle(256, 0, 64, 64); Rectangle destinationRectangle6 = new Rectangle(400, 300, 64, 64); Rectangle frameRectangle6 = new Rectangle(320, 0, 64, 64); Rectangle destinationRectangle7 = new Rectangle(500, 300, 64, 64); Rectangle frameRectangle7 = new Rectangle(384, 0, 64, 64); Rectangle destinationRectangle8 = new Rectangle(600, 300, 64, 64); Rectangle frameRectangle8 = new Rectangle(448, 0, 64, 64); Rectangle destinationRectangle9 = new Rectangle(700, 300, 64, 64); Rectangle frameRectangle9 = new Rectangle(0, 64, 64, 64); Rectangle destinationRectangle10 = new Rectangle(800, 300, 64, 64); Rectangle frameRectangle10 = new Rectangle(64, 64, 64, 64); Rectangle destinationRectangle11 = new Rectangle(400, 400, 64, 64); Rectangle frameRectangle11 = new Rectangle(128, 64, 64, 64); Rectangle destinationRectangle12 = new Rectangle(500, 400, 64, 64); Rectangle frameRectangle12 = new Rectangle(192, 64, 64, 64); Rectangle destinationRectangle13 = new Rectangle(600, 400, 64, 64); Rectangle frameRectangle13 = new Rectangle(256, 64, 64, 64); Rectangle destinationRectangle14 = new Rectangle(700, 400, 64, 64); Rectangle frameRectangle14 = new Rectangle(320, 64, 64, 64); Rectangle destinationRectangle15 = new Rectangle(800, 400, 64, 64); Rectangle frameRectangle15 = new Rectangle(384, 64, 64, 64); Rectangle destinationRectangle16 = new Rectangle(600, 500, 64, 64); Rectangle frameRectangle16 = new Rectangle(448, 64, 64, 64); spriteBatch.Begin(); spriteBatch.Draw(forestBG, screenRectangle, Color.White); spriteBatch.Draw(highLight, highLightPos, Color.White); spriteBatch.Draw(levelSelectTiles, destinationRectangle1, frameRectangle1, Color.White); spriteBatch.Draw(levelSelectTiles, destinationRectangle2, frameRectangle2, Color.White); spriteBatch.Draw(levelSelectTiles, destinationRectangle3, frameRectangle3, Color.White); spriteBatch.Draw(levelSelectTiles, destinationRectangle4, frameRectangle4, Color.White); spriteBatch.Draw(levelSelectTiles, destinationRectangle5, frameRectangle5, Color.White); spriteBatch.Draw(levelSelectTiles, destinationRectangle6, frameRectangle6, Color.White); spriteBatch.Draw(levelSelectTiles, destinationRectangle7, frameRectangle7, Color.White); spriteBatch.Draw(levelSelectTiles, destinationRectangle8, frameRectangle8, Color.White); spriteBatch.Draw(levelSelectTiles, destinationRectangle9, frameRectangle9, Color.White); spriteBatch.Draw(levelSelectTiles, destinationRectangle10, frameRectangle10, Color.White); spriteBatch.Draw(levelSelectTiles, destinationRectangle11, frameRectangle11, Color.White); spriteBatch.Draw(levelSelectTiles, destinationRectangle12, frameRectangle12, Color.White); spriteBatch.Draw(levelSelectTiles, destinationRectangle13, frameRectangle13, Color.White); spriteBatch.Draw(levelSelectTiles, destinationRectangle14, frameRectangle14, Color.White); spriteBatch.Draw(levelSelectTiles, destinationRectangle15, frameRectangle15, Color.White); spriteBatch.Draw(levelSelectTiles, destinationRectangle16, frameRectangle16, Color.White); spriteBatch.End(); PS, I'm aware that this code is probably inefficient, cumbersome or that there's a better way to draw parts of a tile sheet. Any suggestions would be appreciated.

    Read the article

  • An issue with tessellation a model with DirectX11

    - by Paul Ske
    I took the hardware tessellation tutorial from Rastertek and implemended texturing instead of color. This is great, so I wanted to implemended the same techique to a model inside my game editor and I noticed it doesn't draw anything. I compared the detailed tessellation from DirectX SDK sample. Inside the shader file - if I replace the HullInputType with PixelInputType it draws. So, I think because when I compiled the shaders inside the program it compiles VertexShader, PixelShader, HullShader then DomainShader. Isn't it suppose to be VertexShader, HullSHader, DomainShader then PixelShader or does it really not matter? I am just curious why wouldn't the model even be drawn when HullInputType but renders fine with PixelInputType. Shader Code: [code] cbuffer ConstantBuffer { float4x4 WVP; float4x4 World; // the rotation matrix float3 lightvec; // the light's vector float4 lightcol; // the light's color float4 ambientcol; // the ambient light's color bool isSelected; } cbuffer cameraBuffer { float3 cameraDirection; float padding; } cbuffer TessellationBuffer { float tessellationAmount; float3 padding2; } struct ConstantOutputType { float edges[3] : SV_TessFactor; float inside : SV_InsideTessFactor; }; Texture2D Texture; Texture2D NormalTexture; SamplerState ss { MinLOD = 5.0f; MipLODBias = 0.0f; }; struct HullOutputType { float3 position : POSITION; float2 texcoord : TEXCOORD0; float3 normal : NORMAL; float3 tangent : TANGENT; }; struct HullInputType { float4 position : POSITION; float2 texcoord : TEXCOORD0; float3 normal : NORMAL; float3 tangent : TANGENT; }; struct VertexInputType { float4 position : POSITION; float2 texcoord : TEXCOORD; float3 normal : NORMAL; float3 tangent : TANGENT; uint uVertexID : SV_VERTEXID; }; struct PixelInputType { float4 position : SV_POSITION; float2 texcoord : TEXCOORD0; // texture coordinates float3 normal : NORMAL; float3 tangent : TANGENT; float4 color : COLOR; float3 viewDirection : TEXCOORD1; float4 depthBuffer : TEXTURE0; }; HullInputType VShader(VertexInputType input) { HullInputType output; output.position.w = 1.0f; output.position = mul(input.position,WVP); output.texcoord = input.texcoord; output.normal = input.normal; output.tangent = input.tangent; //output.normal = mul(normal,World); //output.tangent = mul(tangent,World); //output.color = output.color; //output.texcoord = texcoord; // set the texture coordinates, unmodified return output; } ConstantOutputType TexturePatchConstantFunction(InputPatch inputPatch,uint patchID : SV_PrimitiveID) { ConstantOutputType output; output.edges[0] = tessellationAmount; output.edges[1] = tessellationAmount; output.edges[2] = tessellationAmount; output.inside = tessellationAmount; return output; } [domain("tri")] [partitioning("integer")] [outputtopology("triangle_cw")] [outputcontrolpoints(3)] [patchconstantfunc("TexturePatchConstantFunction")] HullOutputType HShader(InputPatch patch, uint pointId : SV_OutputControlPointID, uint patchId : SV_PrimitiveID) { HullOutputType output; // Set the position for this control point as the output position. output.position = patch[pointId].position; // Set the input color as the output color. output.texcoord = patch[pointId].texcoord; output.normal = patch[pointId].normal; output.tangent = patch[pointId].tangent; return output; } [domain("tri")] PixelInputType DShader(ConstantOutputType input, float3 uvwCoord : SV_DomainLocation, const OutputPatch patch) { float3 vertexPosition; float2 uvPosition; float4 worldposition; PixelInputType output; // Interpolate world space position with barycentric coordinates float3 vWorldPos = uvwCoord.x * patch[0].position + uvwCoord.y * patch[1].position + uvwCoord.z * patch[2].position; // Determine the position of the new vertex. vertexPosition = vWorldPos; // Calculate the position of the new vertex against the world, view, and projection matrices. output.position = mul(float4(vertexPosition, 1.0f),WVP); // Send the input color into the pixel shader. output.texcoord = uvwCoord.x * patch[0].position + uvwCoord.y * patch[1].position + uvwCoord.z * patch[2].position; output.normal = uvwCoord.x * patch[0].position + uvwCoord.y * patch[1].position + uvwCoord.z * patch[2].position; output.tangent = uvwCoord.x * patch[0].position + uvwCoord.y * patch[1].position + uvwCoord.z * patch[2].position; //output.depthBuffer = output.position; //output.depthBuffer.w = 1.0f; //worldposition = mul(output.position,WVP); //output.viewDirection = cameraDirection.xyz - worldposition.xyz; //output.viewDirection = normalize(output.viewDirection); return output; } [/code] Somethings are commented out but will be in place when fixed. I'm probably not connecting something correctly.

    Read the article

  • RTS Voxel Engine using LWJGL - Textures glitching

    - by Dieter Hubau
    I'm currently working on an RTS game engine using voxels. I have implemented a basic chunk manager using an Octree of Octrees which contains my voxels (simple square blocks, as in Minecraft). I'm using a Voronoi-based terrain generation to get a simplistic yet relatively realistic heightmap. I have no problem showing a 256*256*256 grid of voxels with a decent framerate (250), because of frustum culling, face culling and only rendering visible blocks. For example, in a random voxel grid of 256*256*256 I generally only render 100k-120k faces, not counting frustum culling. Frustum culling is only called every 100ms, since calling it every frame seemed a bit overkill. Now I have reached the stage of texturing and I'm experiencing some problems: Some experienced people might already see the problem, but if we zoom in, you can see the glitches more clearly: All the seams between my blocks are glitching and kind of 'overlapping' or something. It's much more visible when you're moving around. I'm using a single, simple texture map to draw on my cubes, where each texture is 16*16 pixels big: I have added black edges around the textures to get a kind of cellshaded look, I think it's cool. The texture map has 256 textures of each 16*16 pixels, meaning the total size of my texture map is 256*256 pixels. The code to update the ChunkManager: public void update(ChunkManager chunkManager) { for (Octree<Cube> chunk : chunks) { if (chunk.getId() < 0) { // generate an id for the chunk to be able to call it later chunk.setId(glGenLists(1)); } glNewList(chunk.getId(), GL_COMPILE); glBegin(GL_QUADS); faces += renderChunk(chunk); glEnd(); glEndList(); } } Where my renderChunk method is: private int renderChunk(Octree<Cube> node) { // keep track of the number of visible faces in this chunk int faces = 0; if (!node.isEmpty()) { if (node.isLeaf()) { faces += renderItem(node); } List<Octree<Cube>> children = node.getChildren(); if (children != null && !children.isEmpty()) { for (Octree<Cube> child : children) { faces += renderChunk(child); } } return faces; } Where my renderItem method is the following: private int renderItem(Octree<Cube> node) { Cube cube = node.getItem(-1, -1, -1); int faces = 0; float x = node.getPosition().x; float y = node.getPosition().y; float z = node.getPosition().z; float size = cube.getSize(); Vector3f point1 = new Vector3f(-size + x, -size + y, size + z); Vector3f point2 = new Vector3f(-size + x, size + y, size + z); Vector3f point3 = new Vector3f(size + x, size + y, size + z); Vector3f point4 = new Vector3f(size + x, -size + y, size + z); Vector3f point5 = new Vector3f(-size + x, -size + y, -size + z); Vector3f point6 = new Vector3f(-size + x, size + y, -size + z); Vector3f point7 = new Vector3f(size + x, size + y, -size + z); Vector3f point8 = new Vector3f(size + x, -size + y, -size + z); TextureCoordinates tc = textureManager.getTextureCoordinates(cube.getCubeType()); // front face if (cube.isVisible(CubeSide.FRONT)) { faces++; glTexCoord2f(TEXTURE_U_COORDINATES[tc.u], TEXTURE_V_COORDINATES[tc.v]); glVertex3f(point1.x, point1.y, point1.z); glTexCoord2f(TEXTURE_U_COORDINATES[tc.u + 1], TEXTURE_V_COORDINATES[tc.v]); glVertex3f(point4.x, point4.y, point4.z); glTexCoord2f(TEXTURE_U_COORDINATES[tc.u + 1], TEXTURE_V_COORDINATES[tc.v + 1]); glVertex3f(point3.x, point3.y, point3.z); glTexCoord2f(TEXTURE_U_COORDINATES[tc.u], TEXTURE_V_COORDINATES[tc.v + 1]); glVertex3f(point2.x, point2.y, point2.z); } // back face if (cube.isVisible(CubeSide.BACK)) { faces++; glTexCoord2f(TEXTURE_U_COORDINATES[tc.u + 1], TEXTURE_V_COORDINATES[tc.v]); glVertex3f(point5.x, point5.y, point5.z); glTexCoord2f(TEXTURE_U_COORDINATES[tc.u + 1], TEXTURE_V_COORDINATES[tc.v + 1]); glVertex3f(point6.x, point6.y, point6.z); glTexCoord2f(TEXTURE_U_COORDINATES[tc.u], TEXTURE_V_COORDINATES[tc.v + 1]); glVertex3f(point7.x, point7.y, point7.z); glTexCoord2f(TEXTURE_U_COORDINATES[tc.u], TEXTURE_V_COORDINATES[tc.v]); glVertex3f(point8.x, point8.y, point8.z); } // left face if (cube.isVisible(CubeSide.SIDE_LEFT)) { faces++; glTexCoord2f(TEXTURE_U_COORDINATES[tc.u], TEXTURE_V_COORDINATES[tc.v]); glVertex3f(point5.x, point5.y, point5.z); glTexCoord2f(TEXTURE_U_COORDINATES[tc.u + 1], TEXTURE_V_COORDINATES[tc.v]); glVertex3f(point1.x, point1.y, point1.z); glTexCoord2f(TEXTURE_U_COORDINATES[tc.u + 1], TEXTURE_V_COORDINATES[tc.v + 1]); glVertex3f(point2.x, point2.y, point2.z); glTexCoord2f(TEXTURE_U_COORDINATES[tc.u], TEXTURE_V_COORDINATES[tc.v + 1]); glVertex3f(point6.x, point6.y, point6.z); } // ETC ETC return faces; } When all this is done, I simply render my lists every frame, like this: public void render(ChunkManager chunkManager) { glBindTexture(GL_TEXTURE_2D, textureManager.getCubeTextureId()); // load all chunks from the tree List<Octree<Cube>> chunks = chunkManager.getTree().getAllItems(); for (Octree<Cube> chunk : chunks) { if (frustum.cubeInFrustum(chunk.getPosition(), chunk.getSize() / 2)) { glCallList(chunk.getId()); } } } I don't know if anyone is willing to go through all of this code or maybe you can spot the problem right away, but that is basically the problem, and I can't find a solution :-) Thanks for reading and any help is appreciated!

    Read the article

  • 2d tank movement and turret solution

    - by Phil
    Hi! I'm making a simple top-down tank game on the ipad where the user controls the movement of the tank with the left "joystick" and the rotation of the turret with the right one. I've spent several hours just trying to get it to work decently but now I turn to the pros :) I have two referencial objects, one for the movement and one for the rotation. The referencial objects always stay max two units away from the tank and I use them to tell the tank in what direction to move. I chose this approach to decouple movement and rotational behaviour from the raw input of the joysticks, I believe this will make it simpler to implement whatever behaviour I want for the tank. My problem is 1; the turret rotates the long way to the target. With this I mean that the target can be -5 degrees away in rotation and still it rotates 355 degrees instead of -5 degrees. I can't figure out why. The other problem is with the movement. It just doesn't feel right to have the tank turn while moving. I'd like to have a solution that would work as well for the AI as for the player. A blackbox function for the movement where the player only specifies in what direction it should move and it moves there under the constraints that are imposed on it. I am using the standard joystick class found in the Unity iPhone package. This is the code I'm using for the movement: public class TankFollow : MonoBehaviour { //Check angle difference and turn accordingly public GameObject followPoint; public float speed; public float turningSpeed; void Update() { transform.position = Vector3.Slerp(transform.position, followPoint.transform.position, speed * Time.deltaTime); //Calculate angle var forwardA = transform.forward; var forwardB = (followPoint.transform.position - transform.position); var angleA = Mathf.Atan2(forwardA.x, forwardA.z) * Mathf.Rad2Deg; var angleB = Mathf.Atan2(forwardB.x, forwardB.z) * Mathf.Rad2Deg; var angleDiff = Mathf.DeltaAngle(angleA, angleB); //print(angleDiff.ToString()); if (angleDiff > 5) { //Rotate to transform.Rotate(new Vector3(0, (-turningSpeed * Time.deltaTime),0)); //transform.rotation = new Quaternion(transform.rotation.x, transform.rotation.y + adjustment, transform.rotation.z, transform.rotation.w); } else if (angleDiff < 5) { transform.Rotate(new Vector3(0, (turningSpeed * Time.deltaTime),0)); //transform.rotation = new Quaternion(transform.rotation.x, transform.rotation.y + adjustment, transform.rotation.z, transform.rotation.w); } else { } transform.position = new Vector3(transform.position.x, 0, transform.position.z); } } And this is the code I'm using to rotate the turret: void LookAt() { var forwardA = -transform.right; var forwardB = (toLookAt.transform.position - transform.position); var angleA = Mathf.Atan2(forwardA.x, forwardA.z) * Mathf.Rad2Deg; var angleB = Mathf.Atan2(forwardB.x, forwardB.z) * Mathf.Rad2Deg; var angleDiff = Mathf.DeltaAngle(angleA, angleB); //print(angleDiff.ToString()); if (angleDiff - 180 > 1) { //Rotate to transform.Rotate(new Vector3(0, (turretSpeed * Time.deltaTime),0)); //transform.rotation = new Quaternion(transform.rotation.x, transform.rotation.y + adjustment, transform.rotation.z, transform.rotation.w); } else if (angleDiff - 180 < -1) { transform.Rotate(new Vector3(0, (-turretSpeed * Time.deltaTime),0)); //transform.rotation = new Quaternion(transform.rotation.x, transform.rotation.y + adjustment, transform.rotation.z, transform.rotation.w); print((angleDiff - 180).ToString()); } else { } } Since I want the turret reference point to turn in relation to the tank (when you rotate the body, the turret should follow and not stay locked on since it makes it impossible to control when you've got two thumbs to work with), I've made the TurretFollowPoint a child of the Turret object, which in turn is a child of the body. I'm thinking that I'm making it too difficult for myself with the reference points but I'm imagining that it's a good idea. Please be honest about this point. So I'll be grateful for any help I can get! I'm using Unity3d iPhone. Thanks!

    Read the article

  • Improve Playback Using Enhancements in Windows Media Player 12

    - by DigitalGeekery
    Are you looking for ways to improve the playback of your media in Windows Media Player 12? We’ll show you how to do that by using the enhancements in WMP 12. If you are in Library mode, you’ll need to click the icon at the lower right to switch to Now Playing mode. Right-click anywhere in Media Player while in Now Playing mode, select Enhancements, and select any of the available options.   You can switch between the individual enhancements by clicking the right and left buttons at the top left.   Crossfading and Auto Volume Leveling The Auto Volume Leveling setting is just a simple toggle on and off. If your MP3 or WMA files have volume leveling information values.   You can automatically add volume leveling information values to all files you add to your library by switching to Library view, going to Tools > Options, and selecting Add volume leveling information values for new files on the Library tab. Click OK when finished.   Crossfading will gradually decrease the volume of the song that is ending (fade out) and increase volume of the song that is beginning. Click Turn on Crossfading and then click and drag the slider left or right change the amount of overlap between tracks. Graphic Equalizer The graphic equalizer is toggled on and off by clicking Turn on / Turn off at the top left. You can select pre-defined equalizer settings by music genre by clicking the Default list. The radio buttons on the left allow you to move the sliders individually, in a loose group or a tight group. You can always return to the default settings by clicking Reset. Play Speed Settings Choose a pre-defined settings by clicking Slow, Normal, or Fast. Uncheck the Snap slider to common speeds the move the slider right and left to your desired speed. If nothing else, these settings provide a little fun and amusement. Quiet Mode Quiet mode will level out any sharp volume highs and lows within a single track. Simply toggle the setting on or off and select whether you prefer Medium difference or Little difference by selecting one of the radio buttons. SRS WOW effects SRS WOW effects enhance low-frequency and stereo sound performance. Click Turn on to enable the TruBass and WOW Effect sliders. You can also optimize for your speaker type. Click to switch between Regular, Large, and Headphones. Video Settings Video Settings allow you to adjust the Hue, Brightness, Saturation, and Contrast.   You can also adjust the zoom settings by clicking Select video zoom settings.   Dolby Digital Settings Choose between Normal, Night, and Theater settings to adjust the audio for Dolby Digital content. This setting will only effect media with Dolby Digital sound. Looking for more ways to improve your media experience in WMP 12? Check out how to update metadata and cover art and how to share media with other Windows 7 computers on your home network. Similar Articles Productive Geek Tips Fixing When Windows Media Player Library Won’t Let You Add FilesInstall and Use the VLC Media Player on Ubuntu LinuxHow To Rip a Music CD in Windows 7 Media CenterStream Media from Windows 7 to XP with VLC Media PlayerInstalling Windows Media Player Plugin for Firefox TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Check these Awesome Chrome Add-ons iFixit Offers Gadget Repair Manuals Online Vista style sidebar for Windows 7 Create Nice Charts With These Web Based Tools Track Daily Goals With 42Goals Video Toolbox is a Superb Online Video Editor

    Read the article

  • Lighttpd not cleanly restarting (address already in use)

    - by NilObject
    When doing a dist-upgrade recently, my lighttpd-1.4.19 install on Ubuntu 8.0.4 has begun failing to restart or reload properly with the /etc/init.d/lighttpd restart command. ~$ sudo /etc/init.d/lighttpd restart * Stopping web server lighttpd ...done. * Starting web server lighttpd 2009-06-13 04:06:36: (network.c.300) can't bind to port: 80 Address already in use ...fail! The same error occurs when I do a reload. The way I get around it is to kill lighttpd and then issue the start command, but it seems like I shouldn't have to do that :) I've looked at my config files, and can't spot any immediate errors. Does anyone have any ideas what can be causing this error? This seems to be the latest version as of writing this question that is available via the apt-get route. My config file is: # Debian lighttpd configuration file # ############ Options you really have to take care of #################### ## modules to load # mod_access, mod_accesslog and mod_alias are loaded by default # all other module should only be loaded if neccesary # - saves some time # - saves memory server.modules = ( "mod_access", "mod_alias", "mod_accesslog", "mod_compress", "mod_fastcgi", "mod_rewrite", "mod_redirect", ) ## a static document-root, for virtual-hosting take look at the ## server.virtual-* options server.document-root = "/var/www/" ## where to send error-messages to server.errorlog = "/var/log/lighttpd/error.log" fastcgi.server = (".php" => (( "bin-path" => "/usr/bin/php5-cgi", "socket" => "/tmp/php.socket" ))) ## files to check for if .../ is requested index-file.names = ( "index.php", "index.html", "index.htm", "default.htm", "index.lighttpd.html" ) ## Use the "Content-Type" extended attribute to obtain mime type if possible # mimetype.use-xattr = "enable" #### accesslog module accesslog.filename = "/var/log/lighttpd/access.log" ## deny access the file-extensions # # ~ is for backupfiles from vi, emacs, joe, ... # .inc is often used for code includes which should in general not be part # of the document-root url.access-deny = ( "~", ".inc" ) ## # which extensions should not be handle via static-file transfer # # .php, .pl, .fcgi are most often handled by mod_fastcgi or mod_cgi static-file.exclude-extensions = ( ".php", ".pl", ".fcgi" ) mimetype.assign = ( ".pdf" => "application/pdf", ".sig" => "application/pgp-signature", ".spl" => "application/futuresplash", ".class" => "application/octet-stream", ".ps" => "application/postscript", ".torrent" => "application/x-bittorrent", ".dvi" => "application/x-dvi", ".gz" => "application/x-gzip", ".pac" => "application/x-ns-proxy-autoconfig", ".swf" => "application/x-shockwave-flash", ".tar.gz" => "application/x-tgz", ".tgz" => "application/x-tgz", ".tar" => "application/x-tar", ".zip" => "application/zip", ".mp3" => "audio/mpeg", ".m3u" => "audio/x-mpegurl", ".wma" => "audio/x-ms-wma", ".wax" => "audio/x-ms-wax", ".ogg" => "audio/x-wav", ".wav" => "audio/x-wav", ".gif" => "image/gif", ".jpg" => "image/jpeg", ".jpeg" => "image/jpeg", ".png" => "image/png", ".xbm" => "image/x-xbitmap", ".xpm" => "image/x-xpixmap", ".xwd" => "image/x-xwindowdump", ".css" => "text/css", ".html" => "text/html", ".htm" => "text/html", ".js" => "text/javascript", ".asc" => "text/plain", ".c" => "text/plain", ".conf" => "text/plain", ".text" => "text/plain", ".txt" => "text/plain", ".dtd" => "text/xml", ".xml" => "text/xml", ".rss" => "application/rss+xml", ".mpeg" => "video/mpeg", ".mpg" => "video/mpeg", ".mov" => "video/quicktime", ".qt" => "video/quicktime", ".avi" => "video/x-msvideo", ".asf" => "video/x-ms-asf", ".asx" => "video/x-ms-asf", ".wmv" => "video/x-ms-wmv", ".bz2" => "application/x-bzip", ".tbz" => "application/x-bzip-compressed-tar", ".tar.bz2" => "application/x-bzip-compressed-tar" ) include_shell "/usr/share/lighttpd/include-conf-enabled.pl" My /etc/init.d/lighttpd script is (untouched from installation): #!/bin/sh ### BEGIN INIT INFO # Provides: lighttpd # Required-Start: networking # Required-Stop: networking # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: Start the lighttpd web server. ### END INIT INFO PATH=/sbin:/bin:/usr/sbin:/usr/bin DAEMON=/usr/sbin/lighttpd NAME=lighttpd DESC="web server" PIDFILE=/var/run/$NAME.pid SCRIPTNAME=/etc/init.d/$NAME ENV="env -i LANG=C PATH=/usr/local/bin:/usr/bin:/bin" SSD="/sbin/start-stop-daemon" DAEMON_OPTS="-f /etc/lighttpd/lighttpd.conf" test -x $DAEMON || exit 0 set -e # be sure there is a /var/run/lighttpd, even with tmpfs mkdir -p /var/run/lighttpd > /dev/null 2> /dev/null chown www-data:www-data /var/run/lighttpd chmod 0750 /var/run/lighttpd . /lib/lsb/init-functions case "$1" in start) log_daemon_msg "Starting $DESC" $NAME if ! $ENV $SSD --start --quiet\ --pidfile $PIDFILE --exec $DAEMON -- $DAEMON_OPTS ; then log_end_msg 1 else log_end_msg 0 fi ;; stop) log_daemon_msg "Stopping $DESC" $NAME if $SSD --quiet --stop --oknodo --retry 30\ --pidfile $PIDFILE --exec $DAEMON; then rm -f $PIDFILE log_end_msg 0 else log_end_msg 1 fi ;; reload) log_daemon_msg "Reloading $DESC configuration" $NAME if $SSD --stop --signal 2 --oknodo --retry 30\ --quiet --pidfile $PIDFILE --exec $DAEMON; then if $ENV $SSD --start --quiet \ --pidfile $PIDFILE --exec $DAEMON -- $DAEMON_OPTS ; then log_end_msg 0 else log_end_msg 1 fi else log_end_msg 1 fi ;; restart|force-reload) $0 stop [ -r $PIDFILE ] && while pidof lighttpd |\ grep -q `cat $PIDFILE 2>/dev/null` 2>/dev/null ; do sleep 1; done $0 start ;; *) echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2 exit 1 ;; esac exit 0

    Read the article

  • Integrated webcam in lenovo t410 not working with 12.04

    - by kristianp
    I have a Lenovo T410 with an inbuilt webcam and I haven't been able to get the webcam working. I tried skype, cheese, both just give me a black window. The microphone works fine with skype, by the way. Can anyone provide any clues please? The webcam is enabled in the bios, but there is no light indicating the webcam is on (not sure if there should be, though). I tried this on Kubuntu 11.10 and have upgraded to 12.04 with the same results. The Fn-F6 keyboard combination doens't seem to do anything either. EDIT: I got the webcam replaced, it looks like it was a hardware problem, because it works fine now. Thanks guys. $ ls /dev/v4l/* /dev/v4l/by-id: usb-Chicony_Electronics_Co.__Ltd._Integrated_Camera-video-index0 /dev/v4l/by-path: pci-0000:00:1a.0-usb-0:1.6:1.0-video-index0 And lsusb: $ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 147e:2016 Upek Biometric Touchchip/Touchstrip Fingerprint Sensor Bus 001 Device 004: ID 0a5c:217f Broadcom Corp. Bluetooth Controller Bus 001 Device 005: ID 17ef:480f Lenovo Integrated Webcam [R5U877] Bus 002 Device 003: ID 05c6:9204 Qualcomm, Inc. Bus 002 Device 004: ID 17ef:1003 Lenovo Integrated Smart Card Reader Here is the output from guvcview, minus lots of lines describing the available capture formats. It says "unable to start with minimum setup. Please reconnect your camera.". guvcview 1.5.3 ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.rear ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.center_lfe ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.side ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib pcm_dmix.c:957:(snd_pcm_dmix_open) The dmix plugin supports only playback stream ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave Cannot connect to server socket err = No such file or directory Cannot connect to server socket jack server is not running or cannot be started video device: /dev/video0 Init. Integrated Camera (location: usb-0000:00:1a.0-1.6) { pixelformat = 'YUYV', description = 'YUV 4:2:2 (YUYV)' } { discrete: width = 640, height = 480 } Time interval between frame: 1/30, .... { discrete: width = 1600, height = 1200 } Time interval between frame: 1/15, vid:17ef pid:480f driver:uvcvideo checking format: 1196444237 libv4l2: error setting pixformat: Device or resource busy VIDIOC_S_FORMAT - Unable to set format: Device or resource busy Init v4L2 failed !! Init video returned -2 trying minimum setup ... video device: /dev/video0 Init. Integrated Camera (location: usb-0000:00:1a.0-1.6) { pixelformat = 'YUYV', description = 'YUV 4:2:2 (YUYV)' } { discrete: width = 640, height = 480 } .... vid:17ef pid:480f driver:uvcvideo checking format: 1448695129 libv4l2: error setting pixformat: Device or resource busy VIDIOC_S_FORMAT - Unable to set format: Device or resource busy Init v4L2 failed !! ERROR: Minimum Setup Failed. Exiting... VIDIOC_REQBUFS - Failed to delete buffers: Invalid argument (errno 22) cleaned allocations - 100% Closing portaudio ...OK Terminated.

    Read the article

  • Trying to implement fling events on an object

    - by Adam Short
    I have a game object, well a bitmap, which I'd like to "fling". I'm struggling to get it to fling ontouchlistener due to it being a bitmap and not sure how to proceed and I'm struggling to find the resources to help. Here's my code so far: https://github.com/addrum/Shapes GameActivity class: package com.main.shapes; import android.app.Activity; import android.content.Context; import android.graphics.Bitmap; import android.graphics.BitmapFactory; import android.graphics.Canvas; import android.os.Bundle; import android.view.GestureDetector; import android.view.MotionEvent; import android.view.SurfaceHolder; import android.view.SurfaceView; import android.view.View.OnTouchListener; import android.view.Window; public class GameActivity extends Activity { private GestureDetector gestureDetector; View view; Bitmap ball; float x, y; @Override protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); //Remove title bar this.requestWindowFeature(Window.FEATURE_NO_TITLE); view = new View(this); ball = BitmapFactory.decodeResource(getResources(), R.drawable.ball); gestureDetector = new GestureDetector(this, new GestureListener()); x = 0; y = 0; setContentView(view); ball.setOnTouchListener(new OnTouchListener() { @Override public boolean onTouch(android.view.View v, MotionEvent event) { // TODO Auto-generated method stub return false; } }); } @Override protected void onPause() { super.onPause(); view.pause(); } @Override protected void onResume() { super.onResume(); view.resume(); } public class View extends SurfaceView implements Runnable { Thread thread = null; SurfaceHolder holder; boolean canRun = false; public View(Context context) { super(context); holder = getHolder(); } public void run() { while (canRun) { if (!holder.getSurface().isValid()) { continue; } Canvas c = holder.lockCanvas(); c.drawARGB(255, 255, 255, 255); c.drawBitmap(ball, x - (ball.getWidth() / 2), y - (ball.getHeight() / 2), null); holder.unlockCanvasAndPost(c); } } public void pause() { canRun = false; while (true) { try { thread.join(); } catch (InterruptedException e) { e.printStackTrace(); } break; } thread = null; } public void resume() { canRun = true; thread = new Thread(this); thread.start(); } } } GestureListener class: package com.main.shapes; import android.view.GestureDetector.SimpleOnGestureListener; import android.view.MotionEvent; public class GestureListener extends SimpleOnGestureListener { private static final int SWIPE_MIN_DISTANCE = 120; private static final int SWIPE_THRESHOLD_VELOCITY = 200; @Override public boolean onFling(MotionEvent e1, MotionEvent e2, float velocityX, float velocityY) { if (e1.getX() - e2.getX() > SWIPE_MIN_DISTANCE && Math.abs(velocityX) > SWIPE_THRESHOLD_VELOCITY) { //From Right to Left return true; } else if (e2.getX() - e1.getX() > SWIPE_MIN_DISTANCE && Math.abs(velocityX) > SWIPE_THRESHOLD_VELOCITY) { //From Left to Right return true; } if (e1.getY() - e2.getY() > SWIPE_MIN_DISTANCE && Math.abs(velocityY) > SWIPE_THRESHOLD_VELOCITY) { //From Bottom to Top return true; } else if (e2.getY() - e1.getY() > SWIPE_MIN_DISTANCE && Math.abs(velocityY) > SWIPE_THRESHOLD_VELOCITY) { //From Top to Bottom return true; } return false; } @Override public boolean onDown(MotionEvent e) { //always return true since all gestures always begin with onDown and<br> //if this returns false, the framework won't try to pick up onFling for example. return true; } }

    Read the article

  • Why does calling CreateDXGIFactory prevent my program from exiting?

    - by smoth190
    I'm using CreateDXGIFactory to get the graphics adapters and display modes. When I call it, it works fine and I get all the data. However, when I exit my program, the main Win32 thread exits, but something stays open because it keeps debugging. Does CreateDXGIFactory create an extra thread and I'm not closing it? I don't understand. The only thing I would suspect is that in the documentation it says it doesn't work if it's called from DllMain. It is in a DLL, but it's not called from DllMain. And it doesn't fail, either. I'm using DirectX 11. Here is the function that initializes DirectX. I haven't gotten past retrieving the refresh rate because of this problem. I commented everything out to pinpoint the problem. bool CGraphicsManager::InitDirectX(HWND hWnd, int width, int height) { HRESULT result; IDXGIFactory* factory; IDXGIOutput* output; IDXGIAdapter* adapter; DXGI_MODE_DESC* displayModes; DXGI_ADAPTER_DESC adapterDesc; unsigned int modeCount = 0; unsigned int refreshNum = 0; unsigned int refreshDen = 0; //First, we need to get the monitors refresh rater result = CreateDXGIFactory(__uuidof(IDXGIFactory), (void**)&factory); //if(FAILED(result)) //{ //MemoryUtil::MessageBoxError(TEXT("InitDirectX"), 0, 0, TEXT("Failed to create DXGI factory\nError:\n%s"), DXGetErrorDescription(result)); //return false; //} /*//Create a graphics card adapter result = factory->EnumAdapters(0, &adapter); if(FAILED(result)) { MemoryUtil::MessageBoxError(TEXT("InitDirectX"), 0, 0, TEXT("Failed to get graphics adapters\nError:\n%s"), DXGetErrorDescription(result)); return false; } //Get the output result = adapter->EnumOutputs(0, &output); if(FAILED(result)) { MemoryUtil::MessageBoxError(TEXT("InitDirectX"), 0, 0, TEXT("Failed to get adapter output\nError:\n%s"), DXGetErrorDescription(result)); return false; } //Get the modes result = output->GetDisplayModeList(DXGI_FORMAT_R8G8B8A8_UNORM, DXGI_ENUM_MODES_INTERLACED, &modeCount, 0); if(FAILED(result)) { MemoryUtil::MessageBoxError(TEXT("InitDirectX"), 0, 0, TEXT("Failed to get mode count\nError:\n%s"), DXGetErrorDescription(result)); return false; } displayModes = new DXGI_MODE_DESC[modeCount]; result = output->GetDisplayModeList(DXGI_FORMAT_R8G8B8A8_UNORM, DXGI_ENUM_MODES_INTERLACED, &modeCount, displayModes); if(FAILED(result)) { MemoryUtil::MessageBoxError(TEXT("InitDirectX"), 0, 0, TEXT("Failed to get display modes\nError:\n%s"), DXGetErrorDescription(result)); return false; } //Now we need to find one for our screen size for(unsigned int i = 0; i < modeCount; i++) { if(displayModes[i].Width == (unsigned int)width) { if(displayModes[i].Height == (unsigned int)height) { refreshNum = displayModes[i].RefreshRate.Numerator; refreshDen = displayModes[i].RefreshRate.Denominator; break; } } } //Store the video card data result = adapter->GetDesc(&adapterDesc); if(FAILED(result)) { MemoryUtil::MessageBoxError(TEXT("InitDirectX"), 0, 0, TEXT("Failed to get adapter description\nError:\n%s"), DXGetErrorDescription(result)); return false; } m_videoCard = new CVideoCard(); MemoryUtil::CreateGameObject(m_videoCard); m_videoCard->VideoCardMemory = (unsigned int)(adapterDesc.DedicatedVideoMemory); wcstombs_s(0, m_videoCard->VideoCardDescription, 128, adapterDesc.Description, 128);*/ //ReleaseCOM(output); //ReleaseCOM(adapter); ReleaseCOM(factory); //DeletePointerArray(displayModes); return true; } Also, I don't know if this means anything, but this is some of the output log when the function is commented out: //... 'LostRock.exe': Loaded 'C:\Windows\SysWOW64\msvcr100d.dll', Symbols loaded. 'LostRock.exe': Loaded 'C:\Windows\SysWOW64\imm32.dll', Cannot find or open the PDB file 'LostRock.exe': Loaded 'C:\Windows\SysWOW64\msctf.dll', Cannot find or open the PDB file 'LostRock.exe': Loaded 'C:\Windows\SysWOW64\uxtheme.dll', Cannot find or open the PDB file 'LostRock.exe': Loaded 'C:\Program Files (x86)\Common Files\microsoft shared\ink\tiptsf.dll', Cannot find or open the PDB file 'LostRock.exe': Loaded 'C:\Windows\SysWOW64\ole32.dll', Cannot find or open the PDB file 'LostRock.exe': Loaded 'C:\Windows\SysWOW64\oleaut32.dll', Cannot find or open the PDB file 'LostRock.exe': Loaded 'C:\Windows\SysWOW64\clbcatq.dll', Cannot find or open the PDB file 'LostRock.exe': Loaded 'C:\Windows\SysWOW64\oleacc.dll', Cannot find or open the PDB file The program '[6560] LostRock.exe: Native' has exited with code 0 (0x0). And when it isn't commented out... //... 'LostRock.exe': Loaded 'C:\Windows\SysWOW64\cfgmgr32.dll', Cannot find or open the PDB file 'LostRock.exe': Loaded 'C:\Windows\SysWOW64\devobj.dll', Cannot find or open the PDB file 'LostRock.exe': Loaded 'C:\Windows\SysWOW64\wintrust.dll', Cannot find or open the PDB file 'LostRock.exe': Loaded 'C:\Windows\SysWOW64\crypt32.dll', Cannot find or open the PDB file 'LostRock.exe': Loaded 'C:\Windows\SysWOW64\msasn1.dll', Cannot find or open the PDB file 'LostRock.exe': Unloaded 'C:\Windows\SysWOW64\setupapi.dll' 'LostRock.exe': Unloaded 'C:\Windows\SysWOW64\devobj.dll' 'LostRock.exe': Unloaded 'C:\Windows\SysWOW64\cfgmgr32.dll' 'LostRock.exe': Loaded 'C:\Windows\SysWOW64\clbcatq.dll', Cannot find or open the PDB file 'LostRock.exe': Loaded 'C:\Windows\SysWOW64\oleacc.dll', Cannot find or open the PDB file The thread 'Win32 Thread' (0xb94) has exited with code 0 (0x0). The program '[8096] LostRock.exe: Native' has exited with code 0 (0x0). //This is called when I click "Stop Debugging" P.S. I know it is CreateDXGIFactory because if I comment it out, the program exits correctly.

    Read the article

  • XNA RTS A* pathfinding issues

    - by Slayter
    I'm starting to develop an RTS game using the XNA framework in C# and am still in the very early prototyping stage. I'm working on the basics. I've got unit selection down and am currently working on moving multiple units. I've implemented an A* pathfinding algorithm which works fine for moving a single unit. However when moving multiple units they stack on top of each other. I tried fixing this with a variation of the boids flocking algorithm but this has caused units to sometimes freeze and get stuck trying to move but going no where. Ill post the related methods for moving the units below but ill only post a link to the pathfinding class because its really long and i don't want to clutter up the page. These parts of the code are in the update method for the main controlling class: if (selectedUnits.Count > 0) { int indexOfLeader = 0; for (int i = 0; i < selectedUnits.Count; i++) { if (i == 0) { indexOfLeader = 0; } else { if (Vector2.Distance(selectedUnits[i].position, destination) < Vector2.Distance(selectedUnits[indexOfLeader].position, destination)) indexOfLeader = i; } selectedUnits[i].leader = false; } selectedUnits[indexOfLeader].leader = true; foreach (Unit unit in selectedUnits) unit.FindPath(destination); } foreach (Unit unit in units) { unit.Update(gameTime, selectedUnits); } These three methods control movement in the Unit class: public void FindPath(Vector2 destination) { if (path != null) path.Clear(); Point startPoint = new Point((int)position.X / 32, (int)position.Y / 32); Point endPoint = new Point((int)destination.X / 32, (int)destination.Y / 32); path = pathfinder.FindPath(startPoint, endPoint); pointCounter = 0; if (path != null) nextPoint = path[pointCounter]; dX = 0.0f; dY = 0.0f; stop = false; } private void Move(List<Unit> units) { if (nextPoint == position && !stop) { pointCounter++; if (pointCounter <= path.Count - 1) { nextPoint = path[pointCounter]; if (nextPoint == position) stop = true; } else if (pointCounter >= path.Count) { path.Clear(); pointCounter = 0; stop = true; } } else { if (!stop) { map.occupiedPoints.Remove(this); Flock(units); // Move in X ********* TOOK OUT SPEED ********** if ((int)nextPoint.X > (int)position.X) { position.X += dX; } else if ((int)nextPoint.X < (int)position.X) { position.X -= dX; } // Move in Y if ((int)nextPoint.Y > (int)position.Y) { position.Y += dY; } else if ((int)nextPoint.Y < (int)position.Y) { position.Y -= dY; } if (position == nextPoint && pointCounter >= path.Count - 1) stop = true; map.occupiedPoints.Add(this, position); } if (stop) { path.Clear(); pointCounter = 0; } } } private void Flock(List<Unit> units) { float distanceToNextPoint = Vector2.Distance(position, nextPoint); foreach (Unit unit in units) { float distance = Vector2.Distance(position, unit.position); if (unit != this) { if (distance < space && !leader && (nextPoint != position)) { // create space dX += (position.X - unit.position.X) * 0.1f; dY += (position.Y - unit.position.Y) * 0.1f; if (dX > .05f) nextPoint.X = nextPoint.X - dX; else if (dX < -.05f) nextPoint.X = nextPoint.X + dX; if (dY > .05f) nextPoint.Y = nextPoint.Y - dY; else if (dY < -.05f) nextPoint.Y = nextPoint.Y + dY; if ((dX < .05f && dX > -.05f) && (dY < .05f && dY > -.05f)) stop = true; path[pointCounter] = nextPoint; Console.WriteLine("Make Space: " + dX + ", " + dY); } else if (nextPoint != position && !stop) { dX = speed; dY = speed; Console.WriteLine(dX + ", " + dY); } } } } And here's the link to the pathfinder: https://docs.google.com/open?id=0B_Cqt6txUDkddU40QXBMeTR1djA I hope this post wasn't too long. Also please excuse the messiness of the code. As I said before this is early prototyping. Any help would be appreciated. Thanks!

    Read the article

  • Trying to detect collision between two polygons using Separating Axis Theorem

    - by Holly
    The only collision experience i've had was with simple rectangles, i wanted to find something that would allow me to define polygonal areas for collision and have been trying to make sense of SAT using these two links Though i'm a bit iffy with the math for the most part i feel like i understand the theory! Except my implementation somewhere down the line must be off as: (excuse the hideous font) As mentioned above i have defined a CollisionPolygon class where most of my theory is implemented and then have a helper class called Vect which was meant to be for Vectors but has also been used to contain a vertex given that both just have two float values. I've tried stepping through the function and inspecting the values to solve things but given so many axes and vectors and new math to work out as i go i'm struggling to find the erroneous calculation(s) and would really appreciate any help. Apologies if this is not suitable as a question! CollisionPolygon.java: package biz.hireholly.gameplay; import android.graphics.Canvas; import android.graphics.Color; import android.graphics.Paint; import biz.hireholly.gameplay.Types.Vect; public class CollisionPolygon { Paint paint; private Vect[] vertices; private Vect[] separationAxes; CollisionPolygon(Vect[] vertices){ this.vertices = vertices; //compute edges and separations axes separationAxes = new Vect[vertices.length]; for (int i = 0; i < vertices.length; i++) { // get the current vertex Vect p1 = vertices[i]; // get the next vertex Vect p2 = vertices[i + 1 == vertices.length ? 0 : i + 1]; // subtract the two to get the edge vector Vect edge = p1.subtract(p2); // get either perpendicular vector Vect normal = edge.perp(); // the perp method is just (x, y) => (-y, x) or (y, -x) separationAxes[i] = normal; } paint = new Paint(); paint.setColor(Color.RED); } public void draw(Canvas c, int xPos, int yPos){ for (int i = 0; i < vertices.length; i++) { Vect v1 = vertices[i]; Vect v2 = vertices[i + 1 == vertices.length ? 0 : i + 1]; c.drawLine( xPos + v1.x, yPos + v1.y, xPos + v2.x, yPos + v2.y, paint); } } /* consider changing to a static function */ public boolean intersects(CollisionPolygon p){ // loop over this polygons separation exes for (Vect axis : separationAxes) { // project both shapes onto the axis Vect p1 = this.minMaxProjection(axis); Vect p2 = p.minMaxProjection(axis); // do the projections overlap? if (!p1.overlap(p2)) { // then we can guarantee that the shapes do not overlap return false; } } // loop over the other polygons separation axes Vect[] sepAxesOther = p.getSeparationAxes(); for (Vect axis : sepAxesOther) { // project both shapes onto the axis Vect p1 = this.minMaxProjection(axis); Vect p2 = p.minMaxProjection(axis); // do the projections overlap? if (!p1.overlap(p2)) { // then we can guarantee that the shapes do not overlap return false; } } // if we get here then we know that every axis had overlap on it // so we can guarantee an intersection return true; } /* Note projections wont actually be acurate if the axes aren't normalised * but that's not necessary since we just need a boolean return from our * intersects not a Minimum Translation Vector. */ private Vect minMaxProjection(Vect axis) { float min = axis.dot(vertices[0]); float max = min; for (int i = 1; i < vertices.length; i++) { float p = axis.dot(vertices[i]); if (p < min) { min = p; } else if (p > max) { max = p; } } Vect minMaxProj = new Vect(min, max); return minMaxProj; } public Vect[] getSeparationAxes() { return separationAxes; } public Vect[] getVertices() { return vertices; } } Vect.java: package biz.hireholly.gameplay.Types; /* NOTE: Can also be used to hold vertices! Projections, coordinates ect */ public class Vect{ public float x; public float y; public Vect(float x, float y){ this.x = x; this.y = y; } public Vect perp() { return new Vect(-y, x); } public Vect subtract(Vect other) { return new Vect(x - other.x, y - other.y); } public boolean overlap(Vect other) { if( other.x <= y || other.y >= x){ return true; } return false; } /* used specifically for my SAT implementation which i'm figuring out as i go, * references for later.. * http://www.gamedev.net/page/resources/_/technical/game-programming/2d-rotated-rectangle-collision-r2604 * http://www.codezealot.org/archives/55 */ public float scalarDotProjection(Vect other) { //multiplier = dot product / length^2 float multiplier = dot(other) / (x*x + y*y); //to get the x/y of the projection vector multiply by x/y of axis float projX = multiplier * x; float projY = multiplier * y; //we want to return the dot product of the projection, it's meaningless but useful in our SAT case return dot(new Vect(projX,projY)); } public float dot(Vect other){ return (other.x*x + other.y*y); } }

    Read the article

  • Libnoise producing completely random noise

    - by Doodlemeat
    I am using libnoise in C++ taken and I have some problems with getting coherent noise. I mean, the noise produced now are completely random and it doesn't look like a noise. Here's a to the image produced by my game. I am diving the map into several chunks, but I can't seem to find any problem doing that since libnoise supports tileable noise. The code can be found below. Every chunk is 8x8 tiles large. Every tile is 64x64 pixels. I am also providing a link to download the entire project. It was made in Visual Studio 2013. Download link This is the code for generating a chunk Chunk *World::loadChunk(sf::Vector2i pPosition) { sf::Vector2i chunkPos = pPosition; pPosition.x *= mChunkTileSize.x; pPosition.y *= mChunkTileSize.y; sf::FloatRect bounds(static_cast<sf::Vector2f>(pPosition), sf::Vector2f(static_cast<float>(mChunkTileSize.x), static_cast<float>(mChunkTileSize.y))); utils::NoiseMap heightMap; utils::NoiseMapBuilderPlane heightMapBuilder; heightMapBuilder.SetSourceModule(mNoiseModule); heightMapBuilder.SetDestNoiseMap(heightMap); heightMapBuilder.SetDestSize(mChunkTileSize.x, mChunkTileSize.y); heightMapBuilder.SetBounds(bounds.left, bounds.left + bounds.width - 1, bounds.top, bounds.top + bounds.height - 1); heightMapBuilder.Build(); Chunk *chunk = new Chunk(this); chunk->setPosition(chunkPos); chunk->buildChunk(&heightMap); chunk->setTexture(&mTileset); mChunks.push_back(chunk); return chunk; } This is the code for building the chunk void Chunk::buildChunk(utils::NoiseMap *pHeightMap) { // Resize the tiles space mTiles.resize(pHeightMap->GetWidth()); for (int x = 0; x < mTiles.size(); x++) { mTiles[x].resize(pHeightMap->GetHeight()); } // Set vertices type and size mVertices.setPrimitiveType(sf::Quads); mVertices.resize(pHeightMap->GetWidth() * pHeightMap->GetWidth() * 4); // Get the offset position of all tiles position sf::Vector2i tileSize = mWorld->getTileSize(); sf::Vector2i chunkSize = mWorld->getChunkSize(); sf::Vector2f offsetPositon = sf::Vector2f(mPosition); offsetPositon.x *= chunkSize.x; offsetPositon.y *= chunkSize.y; // Build tiles for (int x = 0; x < mTiles.size(); x++) { for (int y = 0; y < mTiles[x].size(); y++) { // Sometimes libnoise can return a value over 1.0, better be sure to cap the top and bottom.. float heightValue = pHeightMap->GetValue(x, y); if (heightValue > 1.f) heightValue = 1.f; if (heightValue < -1.f) heightValue = -1.f; // Instantiate a new Tile object with the noise value, this doesn't do anything yet.. mTiles[x][y] = new Tile(this, pHeightMap->GetValue(x, y)); // Get a pointer to the current tile's quad sf::Vertex *quad = &mVertices[(y + x * pHeightMap->GetWidth()) * 4]; quad[0].position = sf::Vector2f(offsetPositon.x + x * tileSize.x, offsetPositon.y + y * tileSize.y); quad[1].position = sf::Vector2f(offsetPositon.x + (x + 1) * tileSize.x, offsetPositon.y + y * tileSize.y); quad[2].position = sf::Vector2f(offsetPositon.x + (x + 1) * tileSize.x, offsetPositon.y + (y + 1) * tileSize.y); quad[3].position = sf::Vector2f(offsetPositon.x + x * tileSize.x, offsetPositon.y + (y + 1) * tileSize.y); // find out which type of tile to render, atm only air or stone TileStop *tilestop = mWorld->getTileStopAt(heightValue); sf::Vector2i texturePos = tilestop->getTexturePosition(); // define its 4 texture coordinates quad[0].texCoords = sf::Vector2f(texturePos.x, texturePos.y); quad[1].texCoords = sf::Vector2f(texturePos.x + 64, texturePos.y); quad[2].texCoords = sf::Vector2f(texturePos.x + 64, texturePos.y + 64); quad[3].texCoords = sf::Vector2f(texturePos.x, texturePos.y + 64); } } } All the code that uses libnoise in some way are World.cpp, World.h and Chunk.cpp, Chunk.h in the project.

    Read the article

  • Error in my Separating Axis Theorem collision code

    - by Holly
    The only collision experience i've had was with simple rectangles, i wanted to find something that would allow me to define polygonal areas for collision and have been trying to make sense of SAT using these two links Though i'm a bit iffy with the math for the most part i feel like i understand the theory! Except my implementation somewhere down the line must be off as: (excuse the hideous font) As mentioned above i have defined a CollisionPolygon class where most of my theory is implemented and then have a helper class called Vect which was meant to be for Vectors but has also been used to contain a vertex given that both just have two float values. I've tried stepping through the function and inspecting the values to solve things but given so many axes and vectors and new math to work out as i go i'm struggling to find the erroneous calculation(s) and would really appreciate any help. Apologies if this is not suitable as a question! CollisionPolygon.java: package biz.hireholly.gameplay; import android.graphics.Canvas; import android.graphics.Color; import android.graphics.Paint; import biz.hireholly.gameplay.Types.Vect; public class CollisionPolygon { Paint paint; private Vect[] vertices; private Vect[] separationAxes; int x; int y; CollisionPolygon(Vect[] vertices){ this.vertices = vertices; //compute edges and separations axes separationAxes = new Vect[vertices.length]; for (int i = 0; i < vertices.length; i++) { // get the current vertex Vect p1 = vertices[i]; // get the next vertex Vect p2 = vertices[i + 1 == vertices.length ? 0 : i + 1]; // subtract the two to get the edge vector Vect edge = p1.subtract(p2); // get either perpendicular vector Vect normal = edge.perp(); // the perp method is just (x, y) => (-y, x) or (y, -x) separationAxes[i] = normal; } paint = new Paint(); paint.setColor(Color.RED); } public void draw(Canvas c, int xPos, int yPos){ for (int i = 0; i < vertices.length; i++) { Vect v1 = vertices[i]; Vect v2 = vertices[i + 1 == vertices.length ? 0 : i + 1]; c.drawLine( xPos + v1.x, yPos + v1.y, xPos + v2.x, yPos + v2.y, paint); } } public void update(int xPos, int yPos){ x = xPos; y = yPos; } /* consider changing to a static function */ public boolean intersects(CollisionPolygon p){ // loop over this polygons separation exes for (Vect axis : separationAxes) { // project both shapes onto the axis Vect p1 = this.minMaxProjection(axis); Vect p2 = p.minMaxProjection(axis); // do the projections overlap? if (!p1.overlap(p2)) { // then we can guarantee that the shapes do not overlap return false; } } // loop over the other polygons separation axes Vect[] sepAxesOther = p.getSeparationAxes(); for (Vect axis : sepAxesOther) { // project both shapes onto the axis Vect p1 = this.minMaxProjection(axis); Vect p2 = p.minMaxProjection(axis); // do the projections overlap? if (!p1.overlap(p2)) { // then we can guarantee that the shapes do not overlap return false; } } // if we get here then we know that every axis had overlap on it // so we can guarantee an intersection return true; } /* Note projections wont actually be acurate if the axes aren't normalised * but that's not necessary since we just need a boolean return from our * intersects not a Minimum Translation Vector. */ private Vect minMaxProjection(Vect axis) { float min = axis.dot(new Vect(vertices[0].x+x, vertices[0].y+y)); float max = min; for (int i = 1; i < vertices.length; i++) { float p = axis.dot(new Vect(vertices[i].x+x, vertices[i].y+y)); if (p < min) { min = p; } else if (p > max) { max = p; } } Vect minMaxProj = new Vect(min, max); return minMaxProj; } public Vect[] getSeparationAxes() { return separationAxes; } public Vect[] getVertices() { return vertices; } } Vect.java: package biz.hireholly.gameplay.Types; /* NOTE: Can also be used to hold vertices! Projections, coordinates ect */ public class Vect{ public float x; public float y; public Vect(float x, float y){ this.x = x; this.y = y; } public Vect perp() { return new Vect(-y, x); } public Vect subtract(Vect other) { return new Vect(x - other.x, y - other.y); } public boolean overlap(Vect other) { if(y > other.x && other.y > x){ return true; } return false; } /* used specifically for my SAT implementation which i'm figuring out as i go, * references for later.. * http://www.gamedev.net/page/resources/_/technical/game-programming/2d-rotated-rectangle-collision-r2604 * http://www.codezealot.org/archives/55 */ public float scalarDotProjection(Vect other) { //multiplier = dot product / length^2 float multiplier = dot(other) / (x*x + y*y); //to get the x/y of the projection vector multiply by x/y of axis float projX = multiplier * x; float projY = multiplier * y; //we want to return the dot product of the projection, it's meaningless but useful in our SAT case return dot(new Vect(projX,projY)); } public float dot(Vect other){ return (other.x*x + other.y*y); } }

    Read the article

  • Level of detail algorithm not functioning correctly

    - by Darestium
    I have been working on this problem for months; I have been creating Planet Generator of sorts, after more than 6 months of work I am no closer to finishing it then I was 4 months ago. My problem; The terrain does not subdivide in the correct locations properly, it almost seems as if there is a ghost camera next to me, and the quads subdivide based on the position of this "ghost camera". Here is a video of the broken program: http://www.youtube.com/watch?v=NF_pHeMOju8 The best example of the problem occurs around 0:36. For detail limiting, I am going for a chunked LOD approach, which subdivides the terrain based on how far you are away from it. I use a "depth table" to determine how many subdivisions should take place. void PQuad::construct_depth_table(float distance) { tree[0] = -1; for (int i = 1; i < MAX_DEPTH; i++) { tree[i] = distance; distance /= 2.0f; } } The chuncked LOD relies on the child/parent structure of quads, the depth is determined by a constant e.g: if the constant is 6, there are six levels of detail. The quads which should be drawn go through a distance test from the player to the centre of the quad. void PQuad::get_recursive(glm::vec3 player_pos, std::vector<PQuad*>& out_children) { for (size_t i = 0; i < children.size(); i++) { children[i].get_recursive(player_pos, out_children); } if (this->should_draw(player_pos) || this->depth == 0) { out_children.emplace_back(this); } } bool PQuad::should_draw(glm::vec3 player_position) { float distance = distance3(player_position, centre); if (distance < tree[depth]) { return true; } return false; } The root quad has four children which could be visualized like the following: [] [] [] [] Where each [] is a child. Each child has the same amount of children up until the detail limit, the quads which have are 6 iterations deep are leaf nodes, these nodes have no children. Each node has a corresponding Mesh, each Mesh structure has 16x16 Quad-shapes, each Mesh's Quad-shapes halves in size each detail level deeper - creating more detail. void PQuad::construct_children() { // Calculate the position of the Quad based on the parent's location calculate_position(); if (depth < (int)MAX_DEPTH) { children.reserve((int)NUM_OF_CHILDREN); for (int i = 0; i < (int)NUM_OF_CHILDREN; i++) { children.emplace_back(PQuad(this->face_direction, this->radius)); PQuad *child = &children.back(); child->set_depth(depth + 1); child->set_child_index(i); child->set_parent(this); child->construct_children(); } } else { leaf = true; } } The following function creates the vertices for each quad, I feel that it may play a role in the problem - I just can't determine what is causing the problem. void PQuad::construct_vertices(std::vector<glm::vec3> *vertices, std::vector<Color3> *colors) { vertices->reserve(quad_width * quad_height); for (int y = 0; y < quad_height; y++) { for (int x = 0; x < quad_width; x++) { switch (face_direction) { case YIncreasing: vertices->emplace_back(glm::vec3(position.x + x * element_width, quad_height - 1.0f, -(position.y + y * element_width))); break; case YDecreasing: vertices->emplace_back(glm::vec3(position.x + x * element_width, 0.0f, -(position.y + y * element_width))); break; case XIncreasing: vertices->emplace_back(glm::vec3(quad_width - 1.0f, position.y + y * element_width, -(position.x + x * element_width))); break; case XDecreasing: vertices->emplace_back(glm::vec3(0.0f, position.y + y * element_width, -(position.x + x * element_width))); break; case ZIncreasing: vertices->emplace_back(glm::vec3(position.x + x * element_width, position.y + y * element_width, 0.0f)); break; case ZDecreasing: vertices->emplace_back(glm::vec3(position.x + x * element_width, position.y + y * element_width, -(quad_width - 1.0f))); break; } // Position the bottom, right, front vertex of the cube from being (0,0,0) to (-16, -16, 16) (*vertices)[vertices->size() - 1] -= glm::vec3(quad_width / 2.0f, quad_width / 2.0f, -(quad_width / 2.0f)); colors->emplace_back(Color3(255.0f, 255.0f, 255.0f, false)); } } switch (face_direction) { case YIncreasing: this->centre = glm::vec3(position.x + quad_width / 2.0f, quad_height - 1.0f, -(position.y + quad_height / 2.0f)); break; case YDecreasing: this->centre = glm::vec3(position.x + quad_width / 2.0f, 0.0f, -(position.y + quad_height / 2.0f)); break; case XIncreasing: this->centre = glm::vec3(quad_width - 1.0f, position.y + quad_height / 2.0f, -(position.x + quad_width / 2.0f)); break; case XDecreasing: this->centre = glm::vec3(0.0f, position.y + quad_height / 2.0f, -(position.x + quad_width / 2.0f)); break; case ZIncreasing: this->centre = glm::vec3(position.x + quad_width / 2.0f, position.y + quad_height / 2.0f, 0.0f); break; case ZDecreasing: this->centre = glm::vec3(position.x + quad_width / 2.0f, position.y + quad_height / 2.0f, -(quad_height - 1.0f)); break; } this->centre -= glm::vec3(quad_width / 2.0f, quad_width / 2.0f, -(quad_width / 2.0f)); } Any help in discovering what is causing this "subdivding in the wrong place" would be greatly appreciated.

    Read the article

  • How to properly add texture to multi-fixture/shape b2Body

    - by Blazej Wdowikowski
    Hello to everyone this is my first poste here I hope that will be not fail start. At start I must say I make part 1 in Ray's Tutorial "How To Make A Game Like Fruit Ninja With Box2D and Cocos2D". But I wonder what when I want make more complex body with texture? Simple just add n b2FixtureDef to the same body. OK but what about texture? If I will take code from that tutorial it only fill last fixture. Probably it does not takes every b2Vec2 point. I was right, it did not. So quick refactor and from that -(id)initWithTexture:(CCTexture2D*)texture body:(b2Body*)body original:(BOOL)original { // gather all the vertices from our Box2D shape b2Fixture *originalFixture = body->GetFixtureList(); b2PolygonShape *shape = (b2PolygonShape*)originalFixture->GetShape(); int vertexCount = shape->GetVertexCount(); NSMutableArray *points = [NSMutableArray arrayWithCapacity:vertexCount]; for(int i = 0; i < vertexCount; i++) { CGPoint p = ccp(shape->GetVertex(i).x * PTM_RATIO, shape->GetVertex(i).y * PTM_RATIO); [points addObject:[NSValue valueWithCGPoint:p]]; } if ((self = [super initWithPoints:points andTexture:texture])) { _body = body; _body->SetUserData(self); _original = original; // gets the center of the polygon _centroid = self.body->GetLocalCenter(); // assign an anchor point based on the center self.anchorPoint = ccp(_centroid.x * PTM_RATIO / texture.contentSize.width, _centroid.y * PTM_RATIO / texture.contentSize.height); } return self; } I came up with that -(id)initWithTexture:(CCTexture2D*)texture body:(b2Body*)body original:(BOOL)original { int vertexCount = 0; //gather total number of b2Vect2 points b2Fixture *currentFixture = body->GetFixtureList(); while (currentFixture) { //new b2PolygonShape *shape = (b2PolygonShape*)currentFixture->GetShape(); vertexCount += shape->GetVertexCount(); currentFixture = currentFixture->GetNext(); } NSMutableArray *points = [NSMutableArray arrayWithCapacity:vertexCount]; // gather all the vertices from our Box2D shape b2Fixture *originalFixture = body->GetFixtureList(); while (originalFixture) { //new NSLog((NSString*)@"-"); b2PolygonShape *shape = (b2PolygonShape*)originalFixture->GetShape(); int currentVertexCount = shape->GetVertexCount(); for(int i = 0; i < currentVertexCount; i++) { CGPoint p = ccp(shape->GetVertex(i).x * PTM_RATIO, shape->GetVertex(i).y * PTM_RATIO); [points addObject:[NSValue valueWithCGPoint:p]]; } originalFixture = originalFixture->GetNext(); } if ((self = [super initWithPoints:points andTexture:texture])) { _body = body; _body->SetUserData(self); _original = original; // gets the center of the polygon _centroid = self.body->GetLocalCenter(); // assign an anchor point based on the center self.anchorPoint = ccp(_centroid.x * PTM_RATIO / texture.contentSize.width,_centroid.y * PTM_RATIO / texture.contentSize.height); } return self; } I was working for simple two fixtures body like b2BodyDef bodyDef; bodyDef.type = b2_dynamicBody; bodyDef.position = position; bodyDef.angle = rotation; b2Body *body = world->CreateBody(&bodyDef); b2FixtureDef fixtureDef; fixtureDef.density = 1.0; fixtureDef.friction = 0.5; fixtureDef.restitution = 0.2; fixtureDef.filter.categoryBits = 0x0001; fixtureDef.filter.maskBits = 0x0001; b2Vec2 vertices[] = { b2Vec2(0.0/PTM_RATIO,50.0/PTM_RATIO), b2Vec2(0.0/PTM_RATIO,0.0/PTM_RATIO), b2Vec2(50.0/PTM_RATIO,30.1/PTM_RATIO), b2Vec2(60.0/PTM_RATIO,60.0/PTM_RATIO) }; b2PolygonShape shape; shape.Set(vertices, 4); fixtureDef.shape = &shape; body->CreateFixture(&fixtureDef); b2Vec2 vertices2[] = { b2Vec2(20.0/PTM_RATIO,50.0/PTM_RATIO), b2Vec2(20.0/PTM_RATIO,0.0/PTM_RATIO), b2Vec2(70.0/PTM_RATIO,30.1/PTM_RATIO), b2Vec2(80.0/PTM_RATIO,60.0/PTM_RATIO) }; shape.Set(vertices2, 4); fixtureDef.shape = &shape; body->CreateFixture(&fixtureDef); But if I try put secondary shape upper than first it starting wierd, texture goes crazy. For example not mention about more complex shapes. What's more if shapes have one common point texture will not render for them at all [For that I use Physics Edytor like in tutorial part1] BTW. I use PolygonSprite and in method createWithWorld... another shapes. Uff.. Question So my question is, why texture coords are in such a mess up? It's my modify method or just wrong approach? Maybe I should remove duplicated from points array?

    Read the article

  • XNA: Huge Tile Map, long load times

    - by Zach
    Recently I built a tile map generator for a game project. What I am very proud of is that I finally got it to the point where I can have a GIANT 2D map build perfectly on my PC. About 120000pixels by 40000 pixels. I can go larger actually, but I have only 1 draw back. #1 ram, the map currently draws about 320MB of ram and I know the Xbox allows 512MB I think? #2 It takes 20 mins for the map to build then display on the Xbox, on my PC it take less then a few seconds. I need to bring that 20 minutes of generating from 20 mins to how ever little bit I can, and how can a lower the amount of RAM usage while still being able to generate my map. Right now everything is stored in Jagged Arrays, each piece generating in a size of 1280x720 (the mother piece). Up to the amount that I need, every block is exactly 40x40 pixels however the blocks get removed from a List or regenerated in a List depending how close the mother piece is to the player. Saving A LOT of CPU, so at all times its no more then looping through 5184 some blocks. Well at least I'm sure of this. But how can I lower my RAM usage without hurting the size of the map, and how can I lower these INSANE loading times? EDIT: Let me explain my self better. Also I'd like to let everyone know now that I'm inexperienced with many of these things. So here is an example of the arrays I'm using. Here is the overall in a shorter term: int[][] array = new int[30][]; array[0] = new int[] { 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2 }; array[1] = new int[] { 1, 3, 3, 3, 3, 1, 0, 0, 0, 0, 1, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2 }; that goes on for around 30 arrays downward. Now for every time it hits a 1, it goes and generates a tile map 1280x720 and it does that exactly the way it does it above. This is how I loop through those arrays: for (int i = 0; i < array.Length; i += 1) { for (int h = 0; h < array[i].Length; h += 1) { } { Now how the tiles are drawn and removed is something like this: public void Draw(SpriteBatch spriteBatch, Vector2 cam) { if (cam.X >= this.Position.X - 1280) { if (cam.X <= this.Position.X + 2560) { if (cam.Y >= this.Position.Y - 720) { if (cam.Y <= this.Position.Y + 1440) { if (visible) { if (once == 0) { once = 1; visible = false; regen(); } } for (int i = Tiles.Count - 1; i >= 0; i--) { Tiles[i].Draw(spriteBatch, cam); } for (int i = unWalkTiles.Count - 1; i >= 0; i--) { unWalkTiles[i].Draw(spriteBatch, cam); } } else { once = 0; for (int i = Tiles.Count - 1; i >= 0; i--) { Tiles.RemoveAt(i); } for (int i = unWalkTiles.Count - 1; i >= 0; i--) { unWalkTiles.RemoveAt(i); } } } else { once = 0; for (int i = Tiles.Count - 1; i >= 0; i--) { Tiles.RemoveAt(i); } for (int i = unWalkTiles.Count - 1; i >= 0; i--) { unWalkTiles.RemoveAt(i); } } } else { once = 0; for (int i = Tiles.Count - 1; i >= 0; i--) { Tiles.RemoveAt(i); } for (int i = unWalkTiles.Count - 1; i >= 0; i--) { unWalkTiles.RemoveAt(i); } } } else { once = 0; for (int i = Tiles.Count - 1; i >= 0; i--) { Tiles.RemoveAt(i); } for (int i = unWalkTiles.Count - 1; i >= 0; i--) { unWalkTiles.RemoveAt(i); } } } } If you guys still need more information just ask in the comments.

    Read the article

< Previous Page | 364 365 366 367 368 369 370 371 372 373 374 375  | Next Page >