Search Results

Search found 11897 results on 476 pages for 'dean rather'.

Page 369/476 | < Previous Page | 365 366 367 368 369 370 371 372 373 374 375 376  | Next Page >

  • ASP.net file operations delay

    - by mtranda
    Ok, so here's the problem: I'm reading the stream from a FileUpload control, reading in chunks of n bytes and writing the array in a loop until I reach the stream's end. Now the reason I do this is because I need to check several things while the upload is still going on (rather than doing a Save(); which does the whole thing in one go). Here's the problem: when doing this from the local machine, I can see the file just fine as it's uploading and its size increases (had to add a Sleep(); clause in the loop to actually get to see the file being written). However, when I upload the file from a remote machine, I don't get to see it until the the file has completed uploading. Also, I've added another call to write the progress to a text file as the progress is going on, and I get the same thing. Local: the file updates as the upload goes on, remote: the token file only appears after the upload's done (which is somewhat useless since I need it while the upload's still happening). Is there some sort of security setting in (or ASP.net) that maybe saves files in a temporary location for remote machines as opposed to the local machine and then moves them to the specified destination? I would liken this with ASP.net displaying error messages when browsing from the local machine (even on the public hostname) as opposed to the generic compilation error page/generic exception page that is shown when browsing from a remote machine (and customErrors are not off) Any clues on this? Thanks in advance.

    Read the article

  • SQL Server: Clustering by timestamp; pros/cons

    - by Ian Boyd
    I have a table in SQL Server, where i want inserts to be added to the end of the table (as opposed to a clustering key that would cause them to be inserted in the middle). This means I want the table clustered by some column that will constantly increase. This could be achieved by clustering on a datetime column: CREATE TABLE Things ( ... CreatedDate datetime DEFAULT getdate(), [timestamp] timestamp, CONSTRAINT [IX_Things] UNIQUE CLUSTERED (CreatedDate) ) But I can't guaranteed that two Things won't have the same time. So my requirements can't really be achieved by a datetime column. I could add a dummy identity int column, and cluster on that: CREATE TABLE Things ( ... RowID int IDENTITY(1,1), [timestamp] timestamp, CONSTRAINT [IX_Things] UNIQUE CLUSTERED (RowID) ) But you'll notice that my table already constains a timestamp column; a column which is guaranteed to be a monotonically increasing. This is exactly the characteristic I want for a candidate cluster key. So I cluster the table on the rowversion (aka timestamp) column: CREATE TABLE Things ( ... [timestamp] timestamp, CONSTRAINT [IX_Things] UNIQUE CLUSTERED (timestamp) ) Rather than adding a dummy identity int column (RowID) to ensure an order, I use what I already have. What I'm looking for are thoughts of why this is a bad idea; and what other ideas are better. Note: Community wiki, since the answers are subjective.

    Read the article

  • Memory allocation in detached NSThread to load an NSDictionary in background?

    - by mobibob
    I am trying to launch a background thread to retrieve XML data from a web service. I developed it synchronously - without threads, so I know that part works. Now I am ready to have a non-blocking service by spawning a thread to wait for the response and parse. I created an NSAutoreleasePool inside the thread and release it at the end of the parsing. The code to spawn and the thread are as follows: Spawn from main-loop code: . . [NSThread detachNewThreadSelector:@selector(spawnRequestThread:) toTarget:self withObject:url]; . . Thread (inside 'self'): -(void) spawnRequestThread: (NSURL*) url { NSAutoreleasePool * pool = [[NSAutoreleasePool alloc] init]; parser = [[NSXMLParser alloc] initWithContentsOfURL:url]; [self parseContentsOfResponse]; [parser release]; [pool release]; } The method parseContentsOfResponse fills an NSMutableDictionary with the parsed document contents. I would like to avoid moving the data around a lot and allocate it back in the main-loop that spawned the thread rather than making a copy. First, is that possible, and if not, can I simply pass in an allocated pointer from the main thread and allocate with 'dictionaryWithDictionary' method? That just seems so inefficient. Are there perferred designs?

    Read the article

  • LINQDataSource and private columns

    - by fyjham
    Hey, I was trying to use a ListView bound to a LinqDataSource to insert to a table where I had a few columns private to the table class (Specifically password columns - only access I want to give outside the class is methods that generate the salt and encrypt the password to store it in 1 go). I gave this a few shots, but I didn't come up with anything I really liked... was wondering if anyone has a better way to do this. The methods I've found: Use the LinqDataSource inserting event and make the appropriate calls on e.NewObject. I don't really like this because it's so far removed from the actual input and there's no simple way to hold the password in the meantime other than a class variable set during the ListView's inserting event (Which works, but seems a little dodgy). Open up these properties and just ask everyone to use the appropriate static methods for encoding the passwords they pass in. I don't really like this cause I'd prefer that class to enforce data integrity rather than relying on all calling code doing it properly... I'm currently going with option #1, but I don't really like passing values between events using class variables like that (It just seems unstructured... even though I can guarantee the events will happen in the right order). Does anyone know a better way, or alternatively am I being too pedantic and one of the methods above is actually the right way to go? Thanks

    Read the article

  • Integrating Search Server 2008 Express with WSS 3.0

    - by Jason Kemp
    I'm setting up the environment for an intranet using WSS (Windows SharePoint Services) 3.0. The catch is getting the environment configured to work with MS Search Server 2008 Express. Here's the environment I'd like to setup: A: Web Server; Win Server 2003 SP2; WSS 3.0 SP2; IIS 6.0; .NET 3.5 SP1 B: Search Server; Win Server 2003 SP2; WSS 3.0 SP2; IIS 6.0; .NET 3.5 SP1; Search Server 2008 Express C: Database Server; Win Server 2003 SP2; SQL Server 2000 SP3 - Admin db, Content db, Config db, Search db The question is whether 3 servers can be used like the above configuration or if the Search Server (B) has to be combined with (A) since we're using the free Express version of the Search Server. The documentation from MS doesn't make it clear either way. I can attack this problem with trial and error but would rather not. The bigger question is: What is the best practice for a WSS / Search Server installation?

    Read the article

  • How do I force or add the content length for ajax type POST requests in Firefox?

    - by Jayson
    I'm trying to POST a http request using ajax, but getting a response from the apache server using modsec_audit that: "POST request must have a Content-Length header." I do not want to disable this in modsec_audit. This occurs only in firefox, and not IE. Further, I switched to using a POST rather than a GET to keep IE from caching my results. This is a simplified version of the code I'm using for the request, I'm not using any javascript framework. function getMyStuff(){ var SearchString = ''; /* build search string */ ... /* now do request */ var xhr = createXMLHttpRequest(); var RequestString = 'someserverscript.cfm' + SearchString; xhr.open("POST", RequestString, true); xhr.onreadystatechange = function(){ processResponse(xhr); } xhr.send(null); } function processResponse(xhr){ var serverResponse = xhr.responseText; var container = document.getElementById('myResultsContainer'); if (xhr.readyState == 4){ container.innerHTML = serverResponse; } } function createXMLHttpRequest(){ try { return new ActiveXObject("Msxml2.XMLHTTP"); } catch (e) {} try { return new ActiveXObject("Microsoft.XMLHTTP"); } catch (e) {} try { return new XMLHttpRequest(); } catch(e) {} return null; } How do I force or add the content length for ajax type POST requests in Firefox?

    Read the article

  • How do I simulate the usage of a sequence of web pages?

    - by Rory Becker
    I have a simple sequence of web pages written in ASP.Net 3.5 SP1. Page1 - A Logon Form.... txtUsername, txtPassword and cmdLogon Page2 - A Menu (created using DevExpress ASP.Net controls) Page3 - The page redirected to by the server in the event that the user picks the right menu option in Page2 I would like to create a threaded program to simulate many users trying to use this sequence of pages. I have managed to create a host Winforms app which Launches a new thread for each "User" I have further managed to work out the basics of WebRequest enough to perform a request which retrieves the Logon page itself. Dim Request As HttpWebRequest = TryCast(WebRequest.Create("http://MyURL/Logon.aspx"), HttpWebRequest) Dim Response As HttpWebResponse = TryCast(Request.GetResponse(), HttpWebResponse) Dim ResponseStream As StreamReader = New StreamReader(Response.GetResponseStream(), Encoding.GetEncoding(1252)) Dim HTMLResponse As String = ResponseStream.ReadToEnd() Response.Close() ResponseStream.Close() Next I need to simulate the user having entered information into the 2 TextBoxes and pressing logon.... I have a hunch this requires me to add the right sort of "PostData" to the request. before submitting. However I'm also concerned that "ViewState" may be an issue. Am I correct regarding the PostData? How do I add the postData to the request? Do I need to be concerned about Viewstate? Update: While I appreciate that Selenium or similar products are useful for acceptance testing , I find that they are rather clumsy for what amounts to load testing. I would prefer not to load 100 instances of Firefox or IE in order to simulate 100 users hitting my site. This was the reason I was hoping to take the ASPNet HttpWebRequest route.

    Read the article

  • Colour manipulation of custom tags in niceEdit HTML editor ( JS / DOM )

    - by Chris
    Hi, I would like to be able to highlight, during typing and in real time, certain custom tags in the format #tag_name# within the text of a nicEdit instance ( http://nicedit.com/ ). My current attempt to implement as close to this as possible revolves around using the blur event of the editor to highlight the tags once the editor loses focus. I then use the following logic to wrap the tags in a span with a highlight class.. htmlEditor.addEvent( "blur", function( ) { str = nicEditors.findEditor( "html_content" ).getContent( ); // Remove existing spans first, leaving just the tag ( this could mess up if the html has been edited directly ) str = str.replace( /(<span class=\"highlight\">)(.[^<]+)(<\/span>)/gi, "$2" ); // Then wrap all instances of a particular tag with the highlight span str = str.replace( /#tag_name#/gi, "<span class='highlight'>#tag_name#</span>" ); nicEditors.findEditor( "html_content" ).setContent( str ); }); This is not ideal as my actual text now contains unwanted spans ( I only want the highlighting for the user's input experience, not to be saved to the database ). Obviously I could remove the spans before saving the text but the whole system is currently open to errors ( If the html is directly edited then other text may get highlighted etc ). What I would like to know is.. Is there any way to directly change the colour of the tags in the editor or DOM without using a mechanism such as this? Perhaps a way of colouring the text in memory rather than changing the HTML ? Any ideas ? Regards Chris P

    Read the article

  • Computing complex math equations in python

    - by dassouki
    Are there any libraries or techniques that simplify computing equations ? Take the following two examples: F = B * { [ a * b * sumOf (A / B ''' for all i ''' ) ] / [ sumOf(c * d * j) ] } where: F = cost from i to j B, a, b, c, d, j are all vectors in the format [ [zone_i, zone_j, cost_of_i_to_j], [..]] This should produce a vector F [ [1,2, F_1_2], ..., [i,j, F_i_j] ] T_ij = [ P_i * A_i * F_i_j] / [ SumOf [ Aj * F_i_j ] // j = 1 to j = n ] where: n is the number of zones T = vector [ [1, 2, A_1_2, P_1_2], ..., [i, j, A_i_j, P_i_j] ] F = vector [1, 2, F_1_2], ..., [i, j, F_i_j] so P_i would be the sum of all P_i_j for all j and Aj would be sum of all P_j for all i I'm not sure what I'm looking for, but perhaps a parser for these equations or methods to deal with multiple multiplications and products between vectors? To calculate some of the factors, for example A_j, this is what i use from collections import defaultdict A_j_dict = defaultdict(float) for A_item in TG: A_j_dict[A_item[1]] += A_item[3] Although this works fine, I really feel that it is a brute force / hacking method and unmaintainable in the case we want to add more variables or parameters. Are there any math equation parsers you'd recommend? Side Note: These equations are used to model travel. Currently I use excel to solve a lot of these equations; and I find that process to be daunting. I'd rather move to python where it pulls the data directly from our database (postgres) and outputs the results into the database. All that is figured out. I'm just struggling with evaluating the equations themselves. Thanks :)

    Read the article

  • How can I get the mapi system stub dll to pass extended mapi calls to my dll?

    - by Bogatyr
    For various reasons (questioning the reasons is not helpful to me), I'd like to implement my own extended mapi dll for windows xp. I have a skeleton dll now, just a few entrypoints exist for testing, but the system mapi stub (c:\windows\system32\mapi32.dll, I've checked that it's identical to mapistub.dll) will not pass through calls to my dll, while it happily passes the same calls through to MS Outlook's msmapi32.dll, (MAPIInitialize, MAPILoginEx are two such calls). There's some secret handshake between the stub and the extended mapi dll wherein the stub checks that "yup, it's an extended mapi dll": maybe it's the presence of some additional entrypoints I haven't implemented yet, maybe it's the return value from some function, I don't know. I've tried tracing a sample app I wrote that calls MAPIInitialize with STraceNT and ProcessMonitor but that didn't show anything obvious. Tracing has shown that indeed the stub loads my dll, but then finds the secret sauce is missing apparently, and returns an error code instead of calling my dll's function. What more could be needed for calling MAPIInitialize than the presence of MAPIInitialize in my dll's exports table? GetProcAddress says it's there. What I'd like to know is how to minimally extend my skeleton extended mapi dll so that the stub mapi dll will pass through extended mapi calls to my dll. What's the secret sauce? I'd rather not spend a painful week in msvc reverse engineering the stub behavior.

    Read the article

  • Is there a way to make changes to toggles in my .emacs file apply without re-starting Emacs?

    - by Vivi
    I want to be able to make the changes to my .emacs file without having to reload Emacs. I found three questions which sort of answer what I am asking (you can find them here, here and here), but the problem is that the change I have just made is to a toggle, and as the comments to two of the answers (a1, a2) to those questions explain, the solutions given there (such as M-x reload-file or M-x eval-buffer) don't apply to toggles. I imagine there is a way of toggling the variable again with a command, but if there is a way to reload the whole .emacs and have the all the toggles re-evaluated without having to specify them, I would prefer. In any case, I would also appreciate if someone told me how to toggle the value of a variable so that if I just changed one toggle I can do it with a command rather than re-start Emacs just for that (I am new to Emacs). I don't know how useful this information is, but the change I applied was the following (which I got from this answer to another question): (setq skeleton-pair t) (setq skeleton-pair-on-word t) (global-set-key (kbd "[") 'skeleton-pair-insert-maybe) (global-set-key (kbd "(") 'skeleton-pair-insert-maybe) (global-set-key (kbd "{") 'skeleton-pair-insert-maybe) (global-set-key (kbd "<") 'skeleton-pair-insert-maybe) Edit: I included the above in .emacs and reloaded Emacs, so that the changes took effect. Then I commented all of it out and tried M-x load-file. This doesn't work. The suggestion below (C-x C-e by PP works if I am using it to evaluate the toggle first time, but not when I want to undo it). I would like something that would evaluate the commenting out, if such thing exists... Thanks :)

    Read the article

  • UnsupportedEncodingException thrown when using Resin and Grails

    - by knorv
    I've encountered a strange problem in a Grails webapp running under Grails: java.io.UnsupportedEncodingException is thrown quite frequently due to various unknown encoding strings (such as "ISO8859_10", "ISO-8859-10"), and the strange thing is that this is done entirely within the Resin and Grails code. That is - no custom code is involved when the exception is thrown. I'm not sure if it is Grails or the servlet container's code that should handle the exception. But I'd assume that the exception should be handled somewhere and not bubble up all the way to stderr. This is the exception in full: java.io.UnsupportedEncodingException: ISO-8859-10 at com.caucho.vfs.i18n.JDKWriter$OutputStreamEncodingWriter.<init>(JDKWriter.java:112) at com.caucho.vfs.i18n.JDKWriter.create(JDKWriter.java:79) at com.caucho.vfs.Encoding.getWriteEncoding(Encoding.java:231) at com.caucho.server.connection.ToByteResponseStream.setEncoding(ToByteResponseStream.java:137) at com.caucho.server.connection.AbstractHttpResponse.setLocale(AbstractHttpResponse.java:1683) at com.caucho.server.connection.HttpServletResponseImpl.setLocale(HttpServletResponseImpl.java: 115) at javax.servlet.ServletResponseWrapper.setLocale(ServletResponseWrapper.java:139) at javax.servlet.ServletResponseWrapper.setLocale(ServletResponseWrapper.java:139) at org.springframework.web.servlet.DispatcherServlet.render(DispatcherServlet.java:1035) at org.codehaus.groovy.grails.web.servlet.GrailsDispatcherServlet.doDispatch(GrailsDispatcherServlet.java:290) at org.springframework.web.servlet.DispatcherServlet.doService(DispatcherServlet.java:716) at org.springframework.web.servlet.FrameworkServlet.processRequest(FrameworkServlet.java:647) at org.springframework.web.servlet.FrameworkServlet.doGet(FrameworkServlet.java:552) at javax.servlet.http.HttpServlet.service(HttpServlet.java:114) My questions: Should the exception be handled? If so, is it the responsibility of the servlet container (Resin) or the web framework (Grails)? How would you go about solving this? (I'd rather not having the exception log cluttered with exceptions that I can do nothing about.)

    Read the article

  • Is there a tool that can refactor this C code correctly?

    - by Alex
    Lets say I have the following code (the array* function are what we use for resizable arrays and they operate on pointers-to-arrays that are null initialized): typedef struct MyStruct { int i; } MyStruct; MyStruct* GetNewMyStruct(int i) { MyStruct* s = malloc(sizeof(MyStruct)); s->i = i; return s; } int SomeFunction(int number, MyStruct *elem) { MyStruct **structs = NULL; int i; for (i = 0; i < number; i++) arrayPush(&structs, GetNewMyStruct(i)); arrayPush(&structs, elem); return arraySize(&structs); } I decide that SomeFunction is too large and I want refactor it. Currently where I work we use VisualAssist X, which has some refactoring capabilities, but when I use it on this it does not work correctly. If I attempt to use it to refactor out the loop, this is what I get: void MyMethod( int number, MyStruct ** structs ) { int i; for (i = 0; i < number; i++) arrayPush(&structs, GetNewMyStruct(i)); } int SomeFunction(int number, MyStruct *elem) { MyStruct **structs = NULL; MyMethod(number, structs); arrrayPush(&structs, elem); return arraySize(&structs); } This is not correct. MyMethod should take a MyStruct ***, not a MyStruct **. This is because the code I'm refactoring takes the address of structs. The result is that the refactored version will always return 1 (since only one object has been pushed into my array) rather than number+1. Are there other tools out there that do this type of refactoring correctly?

    Read the article

  • Collecting high-volume video viewing data

    - by DanK
    I want to add tracking to our Flash-based media player so that we can provide analytics that show what sections of videos are being watched (at the moment, we just register a view when a video starts playing) For example, if a viewer watches the first 30 seconds of a video and then clicks away to something else, we want the data to reflect that. Likewise, if someone watches the first 10 seconds, then scrubs the timeline to the last minute of the video and watches that, we want to register viewing on the parts watched and not the middle section. My first thought was to collect up the viewing data in the player and send it all to the server at the end of a viewing session. Unfortunately, Flash does not seem to have an event that you can hook into when a viewer clicks away from the page the movie is on (probably a good thing - it would be open to abuse) So, it looks like we're going to have to make regular requests to the server as the video is playing. This is obviously going to lead to a high volume of requests when there are large numbers of simultaneous viewers. The simple approach of dumping all these 'heartbeat' events from clients to a database feels like it will quickly become unmanageable so I'm wondering whether I should be taking an approach where viewing sessions are cached in memory and flushed to database when they become inactive (based on a timeout). That way, the data could be stored as time spans rather than individual heartbeats. So, to the question - what is the best way to approach dealing with this kind of high-volume viewing data? Are there any good existing architectures/patterns? Thanks, Dan.

    Read the article

  • Running ASP / ASP.NET markup outside of a web application (perhaps with MVC)

    - by Frank Schwieterman
    Is there a way to include some aspx/ascx markup in a DLL and use that to generate text dynamically? I really just want to pass a model instance to a view and get the produced html as a string. Similar to what you might do with an XSLT transform, except the transform input is a CLR object rather than an XML document. A second benefit is using the ASP.NET code-behind markup which is known by most team members. One way to achieve this would be to load the MVC view engine in-process and perhaps have it use an ASPX file from a resource. It seems like I could call into just the ViewEngine somehow and have it generate a ViewEngineResult. I don't know ASP.NET MVC well enough though to know what calls to make. I don't think this would be possible with classic ASP or ASP.NET as the control model is so tied to the page model, which doesn't exist in this case. Using something like SparkViewEngine in isolation would be cool too, though not as useful since other team members wouldn't know the syntax. At that point I might as well use XSLT (yes I am looking for a clever way to avoid XSLT).

    Read the article

  • Capture data read from file into string stream Java

    - by halluc1nati0n
    I'm coming from a C++ background, so be kind on my n00bish queries... I'd like to read data from an input file and store it in a stringstream. I can accomplish this in an easy way in C++ using stringstreams. I'm a bit lost trying to do the same in Java. Following is a crude code/way I've developed where I'm storing the data read line-by-line in a string array. I need to use a string stream to capture my data into (rather than use a string array).. Any help? char dataCharArray[] = new char[2]; int marker=0; String inputLine; String temp_to_write_data[] = new String[100]; // Now, read from output_x into stringstream FileInputStream fstream = new FileInputStream("output_" + dataCharArray[0]); // Convert our input stream to a BufferedReader BufferedReader in = new BufferedReader (new InputStreamReader(fstream)); // Continue to read lines while there are still some left to read while ((inputLine = in.readLine()) != null ) { // Print file line to screen // System.out.println (inputLine); temp_to_write_data[marker] = inputLine; marker++; }

    Read the article

  • Where should you put 3rd party .NET dlls when using git submodules to avoid duplication

    - by Tim Abell
    I have two .NET library projects in Visual Studio 2008 that both make use of the MySql Connector for .NET (MySql.Data.dll). These libraries are then in turn both used by a .NET command line application which also uses the Connector. The library projects are pulled in to the application's solution as git submodules and referenced by project in Visual Studio. I'm looking for the most effective strategy for storing and referencing the MySql Connector library. I have tried having the MySql.Data.dll checked in to all three projects (in their root folder), this was problematic when one project changed to a newer version of the connector dll. Although each project had its own version of the dll, only one was packaged into the resultant application leading to an API mismatch which was hard to pin down. This has put me off this approach. I have tried having the command line application reference the connector dll that is held in a submodule, however this only removes the possibility of version mismatches when there is only one submodule rather than two as in this case. I am contemplating putting the dll in the global assembly cache (GAC) of all machines that need to build or use the application, but I'm wary of not having all dependencies for an application available in source control.

    Read the article

  • What's your most controversial programming opinion?

    - by Jon Skeet
    This is definitely subjective, but I'd like to try to avoid it becoming argumentative. I think it could be an interesting question if people treat it appropriately. The idea for this question came from the comment thread from my answer to the "What are five things you hate about your favorite language?" question. I contended that classes in C# should be sealed by default - I won't put my reasoning in the question, but I might write a fuller explanation as an answer to this question. I was surprised at the heat of the discussion in the comments (25 comments currently). So, what contentious opinions do you hold? I'd rather avoid the kind of thing which ends up being pretty religious with relatively little basis (e.g. brace placing) but examples might include things like "unit testing isn't actually terribly helpful" or "public fields are okay really". The important thing (to me, anyway) is that you've got reasons behind your opinions. Please present your opinion and reasoning - I would encourage people to vote for opinions which are well-argued and interesting, whether or not you happen to agree with them.

    Read the article

  • Custom QAbstractGraphicsShapeItem very slow in Qt Jambi

    - by Mene
    I try to implement an own QAbstractGraphicsShapeItem in Qt Jambi (4.5) but as soon as I implement a custom class (rather than use e.g. QGraphicsEllipseItem) the rendering speed drops by about on order of magnitude. If looked in the original Code of QGraphicsEllipseItem and it seems to do basicly the same. class Circle extends QAbstractGraphicsShapeItem { final private QRectF rect = new QRectF(); public final void setRect(double x, double y, double w, double h) { QRectF newRect = new QRectF(x, y, w, h); if (!newRect.equals(rect)) { prepareGeometryChange(); this.rect.setX(x); this.rect.setY(y); this.rect.setWidth(w); this.rect.setHeight(h); this.update(rect); } } @Override public final QRectF boundingRect() { return rect; } QPainterPath shape; @Override public final QPainterPath shape() { if (shape == null) { QPainterPath path = new QPainterPath(); path.addEllipse(rect); QPainterPathStroker stroker = new QPainterPathStroker(); QPen pen = this.pen(); stroker.setCapStyle(pen.capStyle()); stroker.setWidth(pen.widthF()); shape = stroker.createStroke(path); } return shape; } @Override public final void paint(QPainter painter, QStyleOptionGraphicsItem option, QWidget widget) { painter.setPen(this.pen()); painter.setBrush(this.brush()); painter.drawEllipse(this.rect); } } I need to render a lot of objects and they are mostly moving, so speed is essential. Anyone knows how to speed this up? I underestand that Java might be slower then the nativ code in the library. But the code in the paint method seems not to be the problem, since commenting it out doesn't change the speed notably.

    Read the article

  • php user authentication libraries / frameworks ... what are the options?

    - by es11
    I am using PHP and the codeigniter framework for a project I am working on, and require a user login/authentication system. For now I'd rather not use SSL (might be overkill and the fact that I am using shared hosting discourages this). I have considered using openID but decided that since my target audience is generally not technical, it might scare users away (not to mention that it requires mirroring of login information etc.). I know that I could write a hash based authentication (such as sha1) since there is no sensitive data being passed (I'd compare the level of sensitivity to that of stackoverflow). That being said, before making a custom solution, it would be nice to know if there are any good libraries or packages out there that you have used to provide semi-secure authentication? I am new to codeigniter, but something that integrates well with it would be preferable. Any ideas? (i'm open to criticism on my approach and open to suggestions as to why I might be crazy not to just use ssl). Thanks in advance. Update: I've looked into some of the suggestions. I am curious to try out zend-auth since it seems well supported and well built. Does anyone have experience with using zend-auth in codeigniter (is it too bulky?) and do you have a good reference on integrating it with CI? I do not need any complex authentication schemes..just a simple login/logout/password-management authorization system. Also, dx_auth seems interesting as well, however I am worried that it is too buggy. Has anybody else had success with this? I realized that I would also like to manage guest users (i.e. users that do not login/register) in a similar way to stackoverflow..so any suggestions that have this functionality would be great

    Read the article

  • Using ARIMA to model and forecast stock prices using user-friendly stats program

    - by Brian
    Hi people, Can anyone please offer some insight into this for me? I'm coming from a functional magnetic resonance imaging research background where I analyzed a lot of time series data, and I'd like to analyze the time series of stock prices (or returns) by: 1) modeling a successful stock in a particular market sector and then cross-correlating the time series of this historically successful stock with that of other newer stocks to look for significant relationships; 2) model a stock's price time series and use forecasting (e.g., exponential smoothing) to predict future values of it. I'd like to use non-linear modeling methods (ARIMA and ARCH) to do this. Several questions: How often do ARIMA and ARCH modeling methods (given that the individual who implements them does so accurately) actually fit the stock time series data they target, and what is the optimal fit I can expect? Is the extent to which this model fits the data commensurate with the extent to which it predicts this stock time series' future values? Rather than randomly selecting stocks to compare or model, if profit is my goal, what is an efficient approach, if any, to selecting the stocks I'm going to analyze? Which stats program is the most user-friendly for this? Any thoughts on this would be great and would go a long way for me. Thanks, Brian

    Read the article

  • How to draw a circle in java with a radius and points around the edge

    - by windopal
    Hi, I'm really stuck on how to go about programming this. I need to draw a circle within a JFrame with a radius and points around the circumference. i can mathematically calculate how to find the coordinates of the point around the edge but i cant seem to be able to program the circle. I am currently using a Ellipse2D method but that doesn't seem to work and doesn't return a radius, as under my understanding, it doesn't draw the circle from the center rather from a starting coordinate using a height and width. My current code is on a separate frame but i need to add it to my existing frame. import java.awt.*; import javax.swing.*; import java.awt.geom.*; public class circle extends JFrame { public circle() { super("circle"); setSize(410, 435); setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); Panel sp = new Panel(); Container content = getContentPane(); content.add(sp); setContentPane(content); setVisible(true); } public static void main (String args[]){ circle sign = new circle(); } } class Panel extends JPanel { public void paintComponent(Graphics comp) { super.paintComponent(comp); Graphics2D comp2D = (Graphics2D) comp; comp2D.setColor(Color.red); Ellipse2D.Float sign1 = new Ellipse2D.Float(0F, 0F, 350F, 350F); comp2D.fill(sign1); } }

    Read the article

  • How to design Models the correct way: Object-oriented or "Package"-oriented?

    - by ajsie
    I know that in OOP you want every object (from a class) to be a "thing", eg. user, validator etc. I know the basics about MVC, how they different parts interact with each other. However, i wonder if the models in MVC should be designed according to the traditional OOP design, that is to say, should every model be a database/table/row (solution 2)? Or is the intention more like to collect methods that are affecting the same table or a bunch of related tables (solution 1). example for an Address book module in CodeIgniter, where i want be able to "CRUD" a Contact and add/remove it to/from a CRUD-able Contact Group. Models solution 1: bunching all related methods together (not real object, rather a "package") class Contacts extends Model { function create_contact() {) function read_contact() {} function update_contact() {} function delete_contact() {} function add_contact_to_group() {} function delete_contact_from_group() {} function create_group() {} function read_group() {} function update_group() {} function delete_group() {} } Models solution 2: the OOP way (one class per file) class Contact extends Model { private $name = ''; private $id = ''; function create_contact() {) function read_contact() {} function update_contact() {} function delete_contact() {} } class ContactGroup extends Model { private $name = ''; private $id = ''; function add_contact_to_group() {} function delete_contact_from_group() {} function create_group() {} function read_group() {} function update_group() {} function delete_group() {} } i dont know how to think when i want to create the models. and the above examples are my real tasks for creating an Address book. Should i just bunch all functions together in one class. then the class contains different logic (contact and group), so it can not hold properties that are specific for either one of them. the solution 2 works according to the OOP. but i dont know why i should make such a dividing. what would the benefits be to have a Contact object for example. Its surely not a User object, so why should a Contact "live" with its own state (properties and methods). you experienced guys with OOP/MVC, please shed a light on how one should think here in this very concrete task.

    Read the article

  • Moq, a translator and an expression

    - by jeriley
    I'm working with an expression within a moq-ed "Get Service" and ran into a rather annoying issue. In order to get this test to run correctly and the get service to return what it should, there's a translator in between that takes what you've asked for, sends it off and gets what you -really- want. So, thinking this was easy I attempt this ... the fakelist is the TEntity objects (translated, used by the UI) and TEnterpriseObject is the actual persistance. mockGet.Setup(mock => mock.Get(It.IsAny<Expression<Func<TEnterpriseObject, bool>>>())).Returns( (Expression<Func<TEnterpriseObject, bool>> expression) => { var items = new List<TEnterpriseObject>(); var translator = (IEntityTranslator<TEntity, TEnterpriseObject>) ObjectFactory.GetInstance(typeof (IEntityTranslator<TEntity, TEnterpriseObject>)); fakeList.ForEach(fake => items.Add(translator.ToEnterpriseObject(fake))); items = items.Where(expression); var result = new List<TEnterpriseObject>(items); fakeList.Clear(); result.ForEach(item => translator.ToEntity(item)); return items; }); I'm getting the red squigglie under there items.where(expression) -- says it can't be infered from usage (confused between <Func<TEnterpriseObject,bool>> and <Func<TEnterpriseObject,int,bool>>) A far simpler version works great ... mockGet.Setup(mock => mock.Get(It.IsAny<Expression<Func<TEntity, bool>>>())).Returns( (Expression<Func<TEntity, bool>> expression) => fakeList.AsQueryable().Where(expression)); so I'm not sure what I'm missing... ideas?

    Read the article

  • What is SSIS order of data transformation component method calls

    - by Ron Ruble
    I am working on a custom data transformation component. I'm using NUnit and NMock2 to test as I code. Testing and getting the custom UI and other features right is a huge pain, in part because I can't find any documentation about the order in which SSIS invokes methods on the component at design time as well as runtime. I can correct the issues readily enough, but it's tedious and time consuming to unregister the old version, register the new version, fire up the test ssis package, try to display the UI, get an obscure error message, backtrace it, modify the component and continue. One of the big issues involves the UI component needing access to the componentmetadata and buffermanager properties of the component at design time, and what I need to provide for to support properties that won't be initialized until after the user enters them in the UI. I can work through it; but if someone knows of some docs or tips that would speed me up, I'd greatly appreciate it. The samples I've found havn't been much use; they seem to be directed to showing off cool stuff (Twitter, weather.com) rather than actual work. Thanks in advance.

    Read the article

< Previous Page | 365 366 367 368 369 370 371 372 373 374 375 376  | Next Page >