Search Results

Search found 33971 results on 1359 pages for 'ask and learn'.

Page 372/1359 | < Previous Page | 368 369 370 371 372 373 374 375 376 377 378 379  | Next Page >

• Setting primary internet connection and network on notebook

  - by Francois

  I have installed Ubuntu on a notebook that I have configured to connect to the internet using an Iburst USB modem. This works 100% after a bit of configuring. I now have a desktop pc that I have installed ubuntu on, and would like to connect the two with a router. I bought a router with wifi, and would like to connect my notebook to the other computer using wifi, while still keeping the internet working with the usb modem. The problem is that as soon as the wifi connect, the internet connection dies. Is there a way to force ubuntu to get internet access through the usb modem, but use wifi to connect to the network? I am pretty new to ubuntu so any help would be appreciated. I also have a samsung galaxy tab that I would like to connect to the internet through usb modem via the wifi, so is there also a way to share that internet connection with the other computers on the network? Thanks in advance.....

  Read the article

• Booting the liveCD/USB in EFI mode fails on Samsung Tablet XE700T1A

  - by F.L.

  My tablet is Samsung Series 7 Slate (XE700T1A-A02FR (French Language)). It operates an Intel Sandy Bridge architecture. The main issue about this tablet is that it ships with an installed Windows 7 in (U)EFI mode (GPT partition table, etc.), so I'd like to get an EFI dual boot with Ubuntu. But it seems I can't boot on the liveCD in EFI mode. It starts loading (up to initrd), but I then get a blank (black) screen. I've tried the nomodeset kernel option (as well as removing quiet and splash) with no luck. [2012-09-27] I have used the Ubuntu 12.04.1 Desktop ISO (I have read somewhere that it is the only one that can boot in EFI mode). I'd say this has something to do with UEFI since the LiveCD boots in bios mode but not in efi mode. Besides, I am not sure my boot info will help, since I can't boot the LiveCD in EFI mode. As a result I can't install ubuntu in EFI mode. So it would be the boot info from the liveCD boot in bios mode. This happens on a ubuntu-12.04.1-desktop-amd64 iso used on a LiveUSB. Live USB was created by dd'ing the iso onto the full disk device (i.e. /dev/sdx no number) of the Flash drive. I have also tried copying the LiveCD files on a primary GPT partition, but with no luck, I just get the grub shell, no menu, no install option. [2012-09-28] I tried today a flash drive created with Ubuntu's Startup Disk Creator and the alternate 12.04.1 64 bit ISO. I get a grub menu in text mode (which meens it did start in efi mode) with install options / test options. But when I start any of these, I simply get a black screen (no cursor, neither mouse nor text-mode cursor). I tried removing the 'quiet' option and adding nomodeset and acpi=off, but it didn't do any good. So this is the same result as for the LiveCD. [2012-10-01] I have tried with a version of the secure remix version via usb-creator-gtk. The boot on the USB key has the same symptoms. Boot in EFI mode is impossible (I have menu but whatever entry I choose, I get the blank screen problem). The boot in BIOS mode works, I did the install. Then I used boot-repair to try installing grub-efi and get a system that would boot in efi mode. But I can't boot this system, because the EFI firmware doesn't seem to detect that sda contains a valid efi partition. Here is the resulting boot-info Boot info 1253554 [2012-10-01] Today, I have reinstalled the pre-shipped version of windows 7, and then installed ubuntu from a secure-remix iso dumped on USB flash drive vie usb-creator-gtk booted in BIOS mode. When install ended, I said "continue testing" then I used boot-repair to try get the bootloader installed. Now, when I boot the tablet, I get the grub menu, it can chainload windows 7 flawlessly. But when I try to start one of the ubuntu options I get the same old blank screen. Here is the new boot-info: Boot info 1253927 [2012-10-01] I tried installing the 3.3 kernel by chrooting a live usb boot (secure remix again) into the installed system. Same symptoms. I feel the key to this is that the device's efi firmware (which is EFI v2.0) would expose the graphics hardware in a way that prevents the kernel to initialize it, and thus prevents it from booting (the kernel stops all drive access just after the screen turns kind of very dark purple). Here is some info on the UEFI firmware as given by rEFInd: EFI revision: 2.00 Platform: x86_64 (64 bit) Firmware: American Megatrends 4.635 Screen Output: Graphics Output (UEFI), 800x600 [2012-10-08] This week end I tried loading the kernel with elilo. Eventhough I didn't have more luck on booting the kernel, elilo gives more info when loading the kernel. I think the next step is trying to load a kernel with EFI stub directly.

  Read the article

• dead keys not working in java app

  - by jippie

  The Arduino IDE is based on a java application called processing. While typing text into processing, it refuses to accept any of the characters under dead keys like " ' ^. As a work around I: Open another window (usually my browser or mail client); I type the character I need; Select and copy the character onto my clip board; Copy the character into processing. What do I have to do to make processing accept characters under dead keys? Disabling dead keys is not an option.

  Read the article

• Ubuntu 12.04 on Lenovo ThinkPad with UEFI

  - by Oleksandr

  I have installed Ubuntu 12.04 Desktop amd64 on my Lenovo ThinkPad E330. There were no problem during installation. Now I can boot to Ubuntu and use it. BUT: now there is only one option in Boot Devices in my ThinkPad's BIOS: ubuntu I can boot ThinkPad to Ubuntu on HDD ONLY - no other options. I switched BIOS to "Legacy devices only" - this did not help :( Could you, please, help me and explain how to boot my ThinkPad from USB drive? How can I switch back to Legacy devices and use MBR, not UEFI? Thank you!

  Read the article

• Cannot run one of two OS

  - by Nathan

  first i am happy cuz i updated to ubuntu 12.10! yeah The grub had an error, but using this guide https://help.ubuntu.com/community/Boot-Repair i fixed it. yeah again I show you the page that gives me the program http://paste.ubuntu.com/1370085/ I have the system selection screen in violet, but i cannot run Windows XP. Only Ubuntu. When i press enter to start windows, the screen turns black and it returns automatically to the system selection screen. Is just that little problem, i need to use twos OS for job's reason. Thanks in advance and sorry for my little english!

  Read the article

• Force ntfs volumes to be treated like any other by default

  - by soandos

  I have a 20 GB NTFS volume that I was planning on using for a variety of purposes, including being readable by windows with little effort. Unfortunately, for some reason, I cannot execute any files on the drive, even after following the answer here (I was able to mount the volume just fine, but the error persists). How can I fix this? Output from mount: /dev/sda1 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/cgroup type tmpfs (rw) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755) none on /sys/fs/pstore type pstore (rw) systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd) gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=daniel)

  Read the article

• Why does my application hang in interruptible state?

  - by Greg

  Hello, I am running on Ubuntu 10.04 LTS Server an GTK application that used to work fine. It suddenly started to hang in interruptible state (Sl+) without any apparent reason. Here is a snippet of the strace: poll([{fd=3, events=POLLIN}, {fd=5, events=POLLIN}], 2, 0) = 0 (Timeout) poll([{fd=5, events=POLLIN|POLLOUT}], 1, -1) = 1 ([{fd=5, revents=POLLOUT}]) writev(5, [{"\2\30\4\0\224\4\240\0\0@\0\0\37\0\240\0\2\4\4\0\224\4\240\0\0@\0\0\37\0\240\0"..., 192}, {NULL, 0}, {"", 0}], 3) = 192 read(5, 0x2ba9ac4, 4096) = -1 EAGAIN (Resource temporarily unavailable) I googled that line read(5, 0x2ba9ac4, 4096), which seems to be more significant, and it seems that many other applications tend to have the same problem. I tried to restart my X server, but it didn't help. Do you have an idea how to solve this problem?

  Read the article

• Font corruption Ubuntu 12.04 Mirosoft Office 2007 / Google earth & Adobe

  - by oneofthemany

  When using MS office 2007 applications I get lines going through text fields on excel spreadsheets and also when I open or save any MS Office document. I am using crossover to run office but I'm also using ttf-mscorefonts for Adobe and Google earth. It appears that sense I upgraded to 12.04 from 11.10 the ms fonts clash. Because if I purge ttf all is OK on MS Office but then Adobe and Google are unreadable Any ideas? Thanks Sean

  Read the article

• USB mass storage couldn't get mounted

  - by revo

  It's my android phone SD card which was indicated damaged by android yesterday night, out of the blue! I put it directly to a USB port with a USB SD card holder case, so in that way I can recover it with TestDisk, which I had experienced before on a similar situation. I also noticed that there is a change in file system and capacity: File System : RAW Capacity : 0 (unknown capacity) Also TestDisk doesn't show it on its partitions list. A 2 GB SD card is not that important in price but I've a lot of files and medias which I need them. Used a mini card reader, TestDisk displayed it on its list but a quick search and or a deep search doesn't have any results No partition found or selected for recovery and then I should quit the program. Your help is appreciated. Update #2 lsusb output: Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 002: ID 04f3:0234 Elan Microelectronics Corp. Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 007 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

  Read the article

• permiso se usuario para lectura de disco duro

  - by Dayron Chavez Sandoval

  tengo una pc asus con ubuntu 14.04.01lts y en el existen 3 cuentas.1 administrador y 2 estandar.el administrador puede leer y modificar los archivos dentro el disco duro.sin embargo los estandar ni siquiera pueden leerlo,dice que necesita permisos para entrar,intentamos cambiarlos desde cuenta administrador pero al marcar la opcion lectura y modificar esta se vuelve a poner automaticamente en no.recuerdo que ubuntu esta instalado junto a windows 8.1 pero estamos pronto a quitarlo por ser muy inestable.

  Read the article

• How do I turn off the onscreen keyboard on the lock screen?

  - by Patrick Marchwiak

  The lock screen has an on screen keyboard that I am unable to disable. I don't remember exactly but I believe I turned it on using the "Screen Keyboard" setting in the Universal Access settings. I've tried a number of things all with no effect: Toggling "Screen Keyboard" in Universal Access Toggling "Onscreen keyboard" in the login screen (LightDM) Clicking on the "x" in the upper right corner of the keyboard

  Read the article

• Suddely internet is not accessible

  - by user189708

  I am going crazy here. One day everything was working fine. I turned pc off and went to sleep. Next day turn pc on and cannot access internet (from any browser). The situation is: I cannot open any webpage from browser (tried Firefox and Epiphany) and cannot receive emails in thunderbird. BUT if I run firefox from console as sudo, I can use it as usual. I can access Skype and pretty much any other network stuff (like installing software with apt-get etc.), also if I use Astrill VPN software I can access webpages even running without sudo. I haven't install any software or anything like that for several days = I have not a clue what could cause this. Just by the way, other Win PC in our home has no issue. Here is what I have tried to fix this: I have tried to restart my pc, router, modem - multiple times I have tried to change permissions to my firefox profile I have tried to completely re-install firefox and start with blank profile, thus no addons I have tried to change /etc/resolv.conf to an IP of my router (it was 127.0.1.1) I have tried to change my hostname (from tomino-NB to tominoNB) I think I might try even more stuff. None of it works. Can someone please try to help me. Thank you UPDATE 1: I have tried this: Removing resolv.conf - Didn't help Also "ping" and "dig" commands cannot resolve host UPDATE 2: I have tried to edit nameservers in resolv.conf but still no effect. I can ping router as well as I can ping outside IP. So definitely just some DNS issue. Is it possible that something is rewriting path to resolv.conf and using different file? UPDATE 3: I have just restarted PC and everything works now... resolv.conf went back to nameserver 127.0.1.1 . I have no clue what happened that it works again...

  Read the article

• Audio codec consuming high battery power

  - by Vamsi Emani

  My powertop reports this for the two audio codec components. 4.85 W 100.0% Device Audio codec hwC0D3: Intel 4.85 W 100.0% Device Audio codec hwC0D0: Realtek I think 10 W for audio is too high. Can somebody please suggest me a way to reduce the power consumption? It'd be nice if someone could educate me on this, I have an idea about codecs in general but I have no clue about their internals? Why is it that these two components keep running always even when I am not listening to audio?

  Read the article

• Ubuntu 12.10 Unity Dash transparency problem

  - by madox2

  I have just upgraded my Ubuntu 12.04 to 12.10 and there is following problem. When I press super button to show Unity Dash I get wrong background image behind the dash box. Especially I can see part of the bottom of the screen. Also when I set transparency to top panel the background behind is not correct. Here is an example with Mc Duck picture: Unity Mc Duck example Do you have any ideas whats wrong? My system preferences: Ubuntu 12.10 32-bit Intel® Pentium(R) CPU G840 @ 2.80GHz × 2 GeForce GTS 450/PCIe/SSE2 Any help will be highly appreciated!

  Read the article

• How to use GCC 4.7 in place of 4.6 (Ubuntu 12.04)

  - by Larz Conwell

  So I'm working on a project and I wanted to use some C11 features for C. To use those features GCC 4.7 is required, so I went to synaptic and looked up 4.7, and I found the packages gcc-4.7-base so I installed it[1]. So now that gcc-4.7-base is installed I expected to be able to use 4.7, but no, when I do gcc --version it still shows 4.6.3 even more, when I try to directly call 4.7(via /usr/bin/gcc-4.7) it doesn't exist, though a gcc-4.6 executable does exist. How do I "activate" GCC 4.7? I read here, you do some crazy stuff with update-alternatives, but it doesn't work for me as the gcc-4.7 executable doesn't actually exist on my machine. Notes: 1. I also saw gcc-4.6-base, so I figured I'd uninstall it, but synaptic attempted to remove every package I had installed and install a Java runtime, so for obvious reason I decided not to remove it.

  Read the article

• does ubuntu 11.10 is support ns2.29

  - by nasser

  I need your help, I'm a beginner on NS2 , and I'm trying to install ns2.29 on ubuntu 11.10 32bits but i can't. This message appear and installation stopped : Build tcl8.4.11 ============================================================ loading cache ./config.cache checking whether to use symlinks for manpages... no checking whether to compress the manpages... no checking whether to add a package name suffix for the manpages... no checking for gcc... gcc checking whether the C compiler (gcc ) works... yes checking whether the C compiler (gcc ) is a cross-compiler... no checking whether we are using GNU C... yes checking whether gcc accepts -g... yes checking for building with threads... no (default) checking if the compiler understands -pipe... yes checking how to run the C preprocessor... gcc -pipe -E checking for sin... no checking for main in -lieee... yes checking for main in -linet... no checking for net/errno.h... no checking for connect... yes checking for gethostbyname... yes checking how to build libraries... static checking for ranlib... ranlib checking if 64bit support is requested... no checking if 64bit Sparc VIS support is requested... no checking system version (for dynamic loading)... ./configure: 1: Syntax error: Unterminated quoted string tcl8.3.2 configuration failed! Exiting ... Tcl is not part of the ns project. Please see www.Scriptics.com to see if they have a fix for your platform. Anyone can help me?

  Read the article

• unable to see gui

  - by Vikasa

  Hey I have Installed UBUNTU 12.04 on vmware work station on windows 7 but when i start up it in vmware i get a message on black screen of ubuntu i.e. " [ 7.3326] pixx4_smbus 0000:00:07.3: Host SMBus controller not enabled! ", and after that it asks for user id and password on black screen and after entering them i still resides in black screen, i am unable to see GUI. please suggest what to do. i am newer to UBUNTU.

  Read the article

• Ubuntu and Surface Pro, wifi issues not fixed?

  - by Confused or too stupid

  Just a quick question, from the numerous other threads I found, is the wifi still a no go straight out of installing Ubuntu? I tried this Dual boot Surface Pro with Ubuntu? with 13.04, the wifi is sporadic in working. From that and other threads I gathered that 13.10 would include the fix, so I tossed that onto the Surface as well, with the same results. Is there anything I am missing? Is there any other distro that has better luck with the Marvell chip?

  Read the article

• PHP-FPM - Nginx - phpMyAdmin - 502 bad gateway

  - by Jesse

  I have installed and configured PHP-FPM, Nginx, and then phpMyAdmin. When I access the main site everything works fine but as soon as I go to http://mysite.com/phpmyadmin I get a 502 bad gateway error. When I look in my error logs I see the following error repeated throughout: (111: Connection refused) while connecting to upstream, client: xx.xx.xx.xx Here is my default.conf for nginx: http://pastebin.com/YFEvAw81 I have tried many different configurations that I have found from users that have had the same issue but can't seem to get any of them to work.

  Read the article

• Ubuntu One API Java - how to use REST and AccessToken?

  - by Michael

  I am writing a java app in eclipse that backups data to several consumer-cloud-services encrypted and redundant. So far, I successfully implemented the authentication process, as it is described in the documentation. At this point, I do not know how to proceed. The next step would be implementing the auth with the stored AccessToken and afterwars implementing upload/download/listing functionality through the REST API. I think I have to store the String oauth.getSerialized(). How do I authenticate with this String afterwards? This does not work e.g.: AuthenticateResponse oauth = api.authenticate(serialized); api.setAuthorizer(new OAuthAuthorizer(oauth)); Can someone tell me please, how I can use the REST API with java? There is no explanation or link in the developers area as far as I saw. And btw, I wasted at least one hour trying to fix errors, because some needed libraries are listet after the example code. :/

  Read the article

• Can I create a hybrid software-RAID array with disks of different sizes?

  - by stueng

  Products such as Synology offer something called Synology Hybrid RAID http://www.synology.com/us/products/features/RAID.php This RAID type allows you to make best use of your disks available by using all the disk space available as long as at least two disks share the same increased size where a typical RAID setup would simply "throw away" the extra space I would like to build a NAS with 4 disks available. I will begin by populating it with 3 X 3TB to give me 6TB usable. By the time I have filled this 6TB I imagine that 4TB disks will have come down in price, so at this stage I would add a 4th 4TB disk to give me an additional 3TB of space. When I next run out of space I will change one of the original 3TB disks with a 4TB disk giving me an additional 1TB of space. This is not possible with a typical RAID configuration, only with these "hybrid RAID" types I am wondering if I can acheive a similar "hybrid RAID" with Ubuntu? or another linux distro?

  Read the article

• "Not enough free swap" error when trying to hibernate

  - by Spirit Zhang

  I recently upgraded from 11.04 to 11.10, but I get "Not enough free swap" error when trying to put my laptop to hibernation. I have 2G of physical memory and 3G for swap. Besides, the hibernate works fine in 11.04. So what might be the problem ? Thanks in advance. UPDATE: The error happens when I try to hibernate. And the memoinfo is here: SwapCached: 0 kB SwapTotal: 4028604 kB SwapFree: 4028604 kB

  Read the article

• Flexible Keyboard starts too late

  - by user289237

  So I just managed to revive an old Windows XP machine that I am getting ready to format into Ubuntu 14.04. However the USB keyboard I have plugged in, powers down with the machine (obviously) but doesn't power up until the Windows loading screen (After my only chance to select boot device, for which I have a USB) It is really frustrating as this renders the f12 key useless and me stuck with a decade + 2 old machine. Thanks for any help :D

  Read the article

• How do I get a Qualcomm Atheros Killer E2200 gigabit ethernet card working on a MSI Z87-GD65?

  - by Travis Allen

  So I literally just built my first computer from scratch and I can't get the network card to work as I've gathered it requires getting some drivers somehow.. Motherboard : MSI Z87-GD65 CPU : Intel Haswell i7 Ubuntu Ver : 12.04 Using the on-board network port Please help I'm about to start crying into my keyboard over this (not really). Any info would be greatly appreciated, also please be very specific as to what I have to do as I have not used Ubuntu very much so talk to me like a child, I won't take offence. Also I've already tried following the instructions here : How do I get a Qualcomm Atheros Killer E2200 gigabit ethernet card working? I don't know if I'm just retarded or am missing something

  Read the article

• Switch keyborad layout hotkeys don't work on lockscreen

  - by svz

  I've recently upgraded to Ubuntu 13.10 which has a known bug that makes it impossible to change keyboard layout via Alt+Shift. I installed this patch which made it possible to switch layouts again. The problem I'm facing now is that it is still impossible to switch keyboard layout when I lock (Ctrl+Alt+L) system and press Alt+Shift. This way if I lock system with wrong layout enabled, I can't switch it to enter the password and unlock PC. I can still change layout by clicking on the layout indicator. I'll be thankful for suggestions on solving this.

  Read the article

< Previous Page | 368 369 370 371 372 373 374 375 376 377 378 379  | Next Page >