Search Results

Search found 51790 results on 2072 pages for 'long running'.

Page 372/2072 | < Previous Page | 368 369 370 371 372 373 374 375 376 377 378 379  | Next Page >

• OpenVPN not sending traffic to internet?

  - by coleifer

  I've set up openvpn on my pi and am running into a small issue. I can connect to the VPN server and ping it just fine, and I can also connect to other machines on my local network. However I am unable, when connected to the VPN, to reach the outside world (either by name lookup or IP). here are the details: On the server the tun0 interface: tun0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1500 inet 10.8.0.1 netmask 255.255.255.255 destination 10.8.0.2 unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen 100 (UNSPEC) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 I can ping it just fine: # ping -c 3 10.8.0.1 PING 10.8.0.1 (10.8.0.1) 56(84) bytes of data. 64 bytes from 10.8.0.1: icmp_seq=1 ttl=64 time=0.159 ms 64 bytes from 10.8.0.1: icmp_seq=2 ttl=64 time=0.155 ms 64 bytes from 10.8.0.1: icmp_seq=3 ttl=64 time=0.156 ms --- 10.8.0.1 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2002ms Routing table # ip route show default via 192.168.1.1 dev eth0 metric 204 10.8.0.0/24 via 10.8.0.2 dev tun0 10.8.0.2 dev tun0 proto kernel scope link src 10.8.0.1 192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.6 metric 204 I also have ip traffic forwarding: net.ipv4.ip_forward = 1 I do not have any custom iptables rules (that I'm aware of). On the client, I can connect to the VPN. Here is my tun0: tun0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1500 inet 10.8.0.6 netmask 255.255.255.255 destination 10.8.0.5 unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen 100 (UNSPEC) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 21 bytes 1527 (1.4 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 And on the client I can ping it: sudo ping -c 3 10.8.0.6 PING 10.8.0.6 (10.8.0.6) 56(84) bytes of data. 64 bytes from 10.8.0.6: icmp_seq=1 ttl=64 time=0.035 ms 64 bytes from 10.8.0.6: icmp_seq=2 ttl=64 time=0.026 ms 64 bytes from 10.8.0.6: icmp_seq=3 ttl=64 time=0.032 ms --- 10.8.0.6 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 1998ms rtt min/avg/max/mdev = 0.026/0.031/0.035/0.003 ms I can ssh from the client into another server on my LAN (192.168.1.x), however I cannot reach anything outside my LAN. Here's some of the server logs at the bottom of this gist: https://gist.github.com/coleifer/6ef95c3008f130249933/edit I am frankly out of ideas! I don't think it's my client because both my laptop and my phone (which has an openvpn client) exhibit the same behavior. I had OpenVPN installed on this pi before using debian and it worked, so I don't think it's my router but of course anything is possible.

  Read the article

• Could not retrieve backup settings for primary ID in Log shipping

  - by user1723139

  I am doing log shipping between two Amazon EC2 instances running Windows Server 2008 R2 with SQL Server 2008 R2 standard edition. Both the instances are in the same domain and I can access the shared folders between the instances. The SQL server service account, agent service account are all running under a domain account. When I activate log shipping (with stand by mode restore in secondary server), the initial backup gets restored on the secondary. After that the backup operation is getting failed and i get the following error message: *** Error: Could not retrieve backup settings for primary ID 'xxxxxx-xxxx-xxxx-xxxx-4d772cd7337e'.(Microsoft.SqlServer.Management.LogShipping) *** *** Error: Failed to connect to server IP-0A7653F2.(Microsoft.SqlServer.ConnectionInfo) *** ****** Error: A network-related or instance-specific error occurred while establishing a connection to SQL Server.******** **The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(.Net SqlClient Data Provider) *** **----- END OF TRANSACTION LOG BACKUP -----**** Any ideas?

  Read the article

• Getting "-bash: fork: Resource temporarily unavailable" in OSX

  - by Joseph Tura

  I seem to run into problems with the max. number of processes every so often. Anyone know what is best practice for fixing this? Running OSX 10.6 on a MacBook Pro i7. ulimit -a returns these values: core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited file size (blocks, -f) unlimited max locked memory (kbytes, -l) unlimited max memory size (kbytes, -m) unlimited open files (-n) 256 pipe size (512 bytes, -p) 1 stack size (kbytes, -s) 8192 cpu time (seconds, -t) unlimited max user processes (-u) 266 virtual memory (kbytes, -v) unlimited When the error occurred I checked, and there were 102 running tasks and 523 threads.

  Read the article

• Route all traffic via OpenVPN client

  - by Ilya

  I've got OpenVPN client running on 192.168.0.3. What I'd like to do is route all the traffic from the second computer with 192.168.0.100 via OpenVPN client that's running on the first computer. My router ip is 192.168.0.1 Network topology: Computer with OpenVPN client: 192.168.0.3 Computer that has to be rerouted: 192.168.0.100 Router: 192.168.0.1 I want it to work in the following way: 192.168.0.100 computer => 192.168.0.3 computer => OpenVPN => 192.168.0.1 How can I achieve that by only modifying windows' routing table? I've tried the following, which didn't work (it just dropped my internet connection): route delete 0.0.0.0 mask 255.255.255.255 192.168.0.1 route add 0.0.0.0 mask 255.255.255.255 192.168.0.100 Thanks!

  Read the article

• Tab title is wrong with ssh/screen on osx

  - by sds

  I am doing ssh -t host screen -D -RR in OS X (10.9) terminal tabs. My ~/.screenrc is identical on all remote hosts and contain the following line: hardstatus string "%H(%n:%t)$USER %h" My ~/.bashrc is also identical on all hosts. When I login to host host_u (Ubuntu 12.04.3 LTS) running Screen version 4.00.03jw4 (FAU) 2-May-06, the tab title on the OS X terminal is host_u(1:bash)sds ~, as expected. When I login to host host_c (CentOS release 6.3 (Final)) running Screen version 4.00.03 (FAU) 23-Oct-06, the tab title on the OS X terminal is ~/FooBar (which is the local OS X directory from which I ran the ssh/screen command. Problem: the hardstatus line does not work on host_c.

  Read the article

• SSD Fresh Does Not Start

  - by Jim Fell

  I recently installed a new 60GB SSD as my primary hard drive and re-installed Windows 7 Professional 64-bit. I then installed SSD Fress from Abelssoft to optimize Windows to run on the SSD. It seemed to install okay, but when I try to run the utility, its splash screen appears briefly before it quietly closes. No errors are displayed; the utility just fails to launch. I have run SSD Fresh on another SSD-equipped Windows 7 Pro x64 computer in the past without any problems. Does anyone know what might be preventing the program from running? I tried shutting down the Spybot Resident and disabling the firewall and virus scanner with no luck. I also tried running the tool as administrator; I even tried reinstalling it, running the installer as administrator. No luck. Every time I try to launch the program the Event Viewer logs this same set of errors: Error 4/2/2012 11:35:44 PM Application Error 1000 (100) Error 4/2/2012 11:35:43 PM .NET Runtime 1026 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None For those who are interested, here is my system configuration: ASRock M3A770DE AM3 AMD 770 ATX AMD Motherboard AMD Athlon II X3 455 Rana 3.3GHz Socket AM3 95W Triple-Core Desktop Processor ADX455WFGMBOX G.SKILL Value Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10600) Desktop Memory Model F3-10600CL9D-8GBNT Mushkin Enhanced Chronos Deluxe MKNSSDCR60GB-DX 2.5" 60GB SATA III Synchronous MLC Internal Solid State Drive (SSD) (Primary/Boot HD) Western Digital Caviar Blue RFHWD1600AAJS 160GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive (Secondary HD) Sony Optiarc CD/DVD Burner Black SATA Model AD-7261S-0B LightScribe Support RAIDMAX RX-850AE 850W ATX12V v2.3 / EPS12V SLI Certified CrossFire Ready 80 PLUS GOLD Certified Modular Active PFC Power Supply ASUS HD7850-DC2-2GD5 Radeon HD 7850 2GB 256-bit GDDR5 PCI Express 3.0 x16 HDCP Ready CrossFireX Support Video Card Asus ML228H 21.5" Full HD LED BackLight LED Monitor Slim Design (x3)

  Read the article

• localhost still responses after uninstalling IIS Windows 7

  - by ryanzec

  I was experimenting with IIS and ASP.NET however I want to go back to WAMP as far as my development server stack on my local windows 7 computer. So I disabled the IIS windows program (using Control Panel - Program and Features - Turn Windows Features on or off) and installed WAMP. I then when to localhost in my browser and just got a blank page. I then uninstalled WAMP and tried again and still got the blank page. I cleared my browser all of saved data like cache and still the same effect. I have uninstalled IIS and WAMP however I can't get localhost to return server not found like it usually does. I know the skype can sometimes effect things running on port 80 so I quit that but still it does not work. Is there a way I can figure out what is running on the port and returning me an empty page?

  Read the article

• How difficult is it to setup a mailserver?

  - by Jacob R

  I want a secure mail solution, as I am looking to move away from Google and other parties looking into my private data. How much of a PITA is it to setup my own mailserver? Should I go for an external provider with a good privacy policy and encrypted data instead? I have a VPS running Debian (with a dedicated IP + reverse DNS), and I'm a fairly capable Linux administrator, having setup a couple of webservers, home networks, and looking over the shoulder of sysadmins at work. The security I currently have on the VPS is limited to iptables and installing/running the bare minimum of what I need (currently basically irssi and lighttpd). When setting up a mail server, is there a lot of stuff to take into consideration? Will my outgoing mail be marked as spam on other servers if I don't implement a number of solutions? Will reliable spam filtering be difficult to setup? Can I easily encrypt the stored mail?

  Read the article

• Run application or script on Windows RDC connection

  - by NickLarsen

  I checked this thread, but it did not solve my exact problem. I need to run a script on when a connection is made across my network using windows remote desktop connection. The thread listed above works for the initial login, however, if I don't log out (which is necessary for some processes running on my network), then it wont run the script again the next time someone connects to the system using remote desktop connection. Previously we were using pcAnywhere to achieve this, however after running into some graphical issues with pcAnywhere, we have decided to move away from it to RDC. For a little more information, we need to have an email sent out anytime a connection is made to particular machines. The login name will always be the same for those systems and we do not log off when closing the connection.

  Read the article

• Windows 7 Ultimate x64 / Safari / Downloads disappear

  - by Dayton Brown

  Running Safari 4.0.5. When I download a file, it never appears in the download folder. If I pause the download I get the xxxxxx.xxx.download temp file to show up. When I then resume the download, it will finish, but will never rename the file to xxxxx.xxx. I've heard from some other posts that AV seems to have a hand in it, but I'm running clamwin av which doesn't have an in memory av process. What should I do?

  Read the article

• Upgrading my Active Directory domain from Server 2003 to Server 2008 R2

  - by drpcken

  We are currently a single domain on a single network running Server 2003 Standard and Exchange 2007. I have a new server up and running (added to the domain already) with Server 2008 R2 on it. I want this to become my Primary Domain Controller, thus replacing my old Server 2003 server. I know I should just be able to run dcpromo on the new server, then decomission my old server, and raise my domain functional level to match the 2008 server. My only concern is the Exchange 2007 server. Is there anything I need to know relevant to it before I start? Thanks!

  Read the article

• IP not Pinging!

  - by Paddy

  I have an apache server running on Mac. i had windows before on the same machine and i had apache running there too. i could access my public sites by just typing in my ip in the web browser. now its not working. its working with localhost though!!! weird!! :( tried a lot of stuff! just couldnt make it work! any help would be greatly appreciated!!

  Read the article

• NFS-Root not working when booting over PXE

  - by Randy

  I am desperately trying to get a diskless client running over PXE-Boot using a NFS-Share as a root file system. I did this before some years ago but for some reason I am stucked at this since days. The TFTP-Server itself is running fine and booting a netinstaller works also fine. The kernel and initrd are loaded also but the bootprocess stops with this (screenshot) kernel panic. I'm using the squeeze standard i386-Kernel and I have prepared the initrd with this config: MODULES=most BUSYBOX=y KEYMAP=n COMPRESS=gzip BOOT=nfs DEVICE= NFSROOT=auto I also tried MODULES=netboot with the same outcome. My PXE-configuration looks like this: LABEL linux KERNEL diskless/debian-default/vmlinuz-2.6.32-5-686 APPEND root=/dev/nfs initrd=diskless/debian-default/vmlinuz-2.6.32-5-686 nfsroot=192.168.140.2:/storage/nfs-boot-images/default-squeeze ip=dhcp rw Furthermore I have captured the network communication of the client via tcpdump and learned that the client isn't even trying to connect to the NFS-share. Does anybody has got an idea what is going wrong here?

  Read the article

• nginx crashes on ssl after about a minute

  - by Scott

  Here are my configuration files ssl.conf # HTTPS server # server { listen 443 ssl; server_name api.domain.com; error_log /var/log/nginx/api.error.log; location / { root /var/www/api.domain.com; index index.html index.php index.php; try_files $uri $uri/ /index.php?$args; } ssl on; ssl_certificate /etc/nginx/api.domain.com.crt; ssl_certificate_key /etc/nginx/api.domain.com.key; ssl_session_timeout 5m; ssl_protocols SSLv2 SSLv3 TLSv1; ssl_ciphers HIGH:!aNULL:!MD5; ssl_prefer_server_ciphers on; # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 location ~ \.php$ { # root html; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_split_path_info ^(.+\.php)(.*)$; fastcgi_param SCRIPT_FILENAME /var/www/api.domain.com$fastcgi_script_name; fastcgi_param HTTPS on; include fastcgi_params; } location ~ /\.ht { deny all; } } nginx.conf user nginx; worker_processes 1; error_log /var/log/nginx/error.log; pid /var/run/nginx.pid; events { worker_connections 1024; } http { include /etc/nginx/mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; access_log /var/log/nginx/access.log main; sendfile on; #tcp_nopush on; #keepalive_timeout 0; keepalive_timeout 65; gzip on; include /etc/nginx/conf.d/*.conf; } I have a server running on port 80 that runs with no issues. As soon as I turn on this api server running on ssl, it works for about a minute and then crashes and gives a 504 Gateway Time-out. Running nginx/1.2.3

  Read the article

• Is this a bug in Profiler or Entity Framework?

  - by AjarnMark

  Using Entity Framework 4 with stored procedures and SQL Server 2008 SP1... When running SQL Server Profiler (TSQL_SPs template), the lines that show my stored procedure call and its statements say that they executed in DatabaseID = 1 (Master) but it is actually happening in my application database (ID = 8). The procedures execute properly and return the data, and they only exist in my application database, so why does Profiler mark those lines as being in Master? Is this a bug in Profiler? Is it a bug in EF4? Note that running the same code against a SQL 2000 instance, Profiler correctly shows the application's database ID.

  Read the article

• change default port of IIS and let another process to listen on port 80 (Windows Server 2008)

  - by aleroot

  I have an installation of Windows Server 2008 running IIS 6 with a website listening on port 8080, even though I have moved the website to listen on 8080, port 80 is still kept in use by IIS (for truth by the kernel process : System - ProcId : 4). I want to let another process listen on port 80 without uninstalling or disabling IIS, I want to keep IIS listening on port 8080 and another service on port 80, is there a way to do it? I saw another similar thread here on serverfault but the solution (using httpcfg.exe delete iplisten -i 0.0.0.0:80 ) can work only in 2003 because in 2008 the utility httpcfg.exe doesn't exist and it seems that it cannot be installed ... Does anyone have a solution to get rid of the kernel listening on port 80 in Windows Server 2008 with IIS running?

  Read the article

• nginx won't respond to monit

  - by Miko

  Although EngineX is running, monit can't seem to figure it out. Here's my monit log: [PDT Apr 13 02:19:19] error : HTTP error: Server returned status 400 [PDT Apr 13 02:19:19] error : 'nginx' failed protocol test [HTTP] at INET[localhost:80] via TCP [PDT Apr 13 02:19:19] info : 'nginx' trying to restart [PDT Apr 13 02:19:19] info : 'nginx' stop: /etc/init.d/nginx [PDT Apr 13 02:19:20] info : 'nginx' start: /etc/init.d/nginx The monitrc file contains the following configuration: if failed port 80 protocol http and request '/ping.txt' # check for response with timeout 20 seconds then restart I can access the file through lynx http://localhost:80/ping.txt without any problems. Why would monit have trouble requesting the file when nginx is running just fine?

  Read the article

• Accessing localhost on IIS7 from another computer on the network

  - by Adam

  I recently upgraded computers to Windows 7 Professional and am running IIS7. When I'm on my computer I can easily access localhost through my web browser but when I try from another computer on my network (replacing localhost with my computer name) it doesn't work. I also tried using "computername.domain.com" and still no luck. I can access other computers running Windows XP and IIS 5 but I'm having no luck accessing my own from another computer. I checked and my IIS7 has anonymous users enabled. Am I missing any other setting? Is this an IIS7 thing or am I missing a setting? Thanks in advance!

  Read the article

• Joining an Active Directory domain using netdom

  - by Cheezo

  I have a simple script to join an AD domain and rename the computer. When I execute these commands directly on the CLI, it works fine. When I execute the same via batch file, I get an error saying The network path was not found I am running as Administrator with full privileges. I have googled around microsoft forums but my case is unique because it works from the CLI and not from the batch file netdom join %%computername%% /domain:OPSCODEDEMO.COM /userd:Administrator /passwordd:xxx netdom renamecomputer %%computername%% /NewName:%hostname% /Force The environment is Windows 2k8 R2 SP1 running on Ninefold Cloud (Xenserver).

  Read the article

• DPMS, keep screen off when lid shut

  - by Evan Teran

  I have a laptop running linux. In my xorg configuration, I have DPMS setup so that the screen automatically turns off during several events. In addition to that I have to the following script tied to ACPI lid open/close events: #!/bin/sh for i in $(pidof X); do CMD=$(ps --no-heading $i) XAUTH="$(echo $CMD | sed -n 's/.*-auth \(.*\)/\1/p')" DISPLAY="$(echo $CMD | sed -n 's/.* \(:[0-9]\) .*/\1/p')" # turn the display off or back on export XAUTHORITY=$XAUTH /usr/bin/xset -display $DISPLAY dpms force $1 done Basically, this script takes one parameter ("on" or "off") then iterates through all of my running X sessions and either turns on or turns off the monitor. Here's my issue. When I close the lid of the laptop, the screen goes off as expected, but if a mouse event occurs (like if something bumps into the table...) then the screen turns back on even though it is closed (I can see the light through the side of the laptop). Is there a way to prevent the screen from turning on during a mouse event if the lid is closed?

  Read the article

• How can I trap errors for an application that is tightly coupled with IIS?

  - by PeanutsMonkey

  We have an unsupported application that relies on IIS however intermittently brings out the website it is integrated with. I have looked at the logs and there is nothing in the logs to indicate what the issue could be as the logs only have GET verbs. I have also looked at the event viewer and there are no error logged in there either. The application runs off a Windows 2008 server. Is there a freely available application we can have running in the background that will listen to or is aware of the application running and traps the error when it crashes? The unsupported application is a bespoke implementation for which we don't have code for and the developer is no longer contactable.

  Read the article

• What's constitute an entry on the IPTables and how to find out which client it is originated from

  - by cbd

  I have a Billion BiPac 7700N Modem/Router/Access Point and I connect another router (TP-Link TL-WR1043ND) in wan-bypass mode to extend the wireless coverage. Lately, I noticed that the connection through TP-Link has been dropping out quite regularly. Having read some posts on the Internet, I checked system log on 7700N and found that there are many "nf_conntract: expectation table full" errors, which I suppose the iptables are full. My questions: What does constitute an entry on the iptable? Is it a client or a connection (which means one client can have multiple connections) How could I find out where are those connections originated from? Note: Many reported that the issue is usually related to having torrents running but I don't have any torrents running. Thank you.

  Read the article

• Outlook 2010 corrupts all Office attachments on a Server 2008R2 Remote Desktop Server

  - by Zhadu

  I have a rather annoying problem with a clients new Remote Desktop server. The problem is that any and all Office attachments (tested with Word and Excel documents) sent to the users via email cannot be opened due to the file seemingly being corrupted/damaged. I have determined that it is a local problem on the server, as the attachments work fine on my own pc. Also I believe the problem is isolated to Outlook, as the users can open already stored Office files without any issues. What are your thoughts on this? Extra information: The server is running Microsoft Server 2008 R2. The Office is a version 2010. It is handeling the roles of AD and RDS - The client only has one server, hence the breach of best practise. There is currently no AV software on the server. I have tried running a repair as well as a reinstalling of Office, with the error still there.

  Read the article

• kernel: journal commit I/O error

  - by jasondewitt

  I am having some problems with a Dell 1950 server. I am installing RHEL 4.6 along with Oracle and some other software on here. I am randomly getting an error message saying "kernel: journal commit I/O error" on my ssh session and on the monitor I have hooked up to the server I see an error scrolling by that says "EXT3-fs error (device sda5) in start_transaction: Journal has aborted." It has happened several times but never at the same point during the install. Actually, this last time the system was up and running and I was just trying to import a database into oracle. This has happened on several hard drives, so I'm pretty sure that is not the problem. This makes me think the raid controller is going bad. What do you guys think? ** UPDATE ** Pretty sure it was a bad hard drive. I threw another drive in the server and it's been running for about 48 hours with out problems.

  Read the article

• How to properly shutdown a Linux VMware Server Host

  - by Mikee

  Hi Everybody: In our lab, we have a server running Ubuntu Linux 8.04.4 x64, with VMware Server 2.1 hosting 4 VM's. I have a major concern with regards to shutting down the host server. Mostly, how do I ensure that the guest VM's are being shut down safely? In the VMware web interface console, I have enabled: "Allow virtual machines to start and stop automatically with the system" I enabled the Default Startup Delay for 15 seconds along with the "Start next VM immediately if the VMware Tools start" option checked I enabled the Default Shutdown Delay with a 60 second shutdown delay and a Shutdown Action of "Shut Down Guest" All VM's have the VMware Tools installed and properly working. All VM's are moved up into the "Specified Order" section of "Startup Order", thus when powering the server back on, all those VM's should start up again in that specified order. When I went to shut down the server, I used the shutdown -h now command. Based on the settings I entered above, I was expecting a 4 minute shutdown, as there is an option to delay the shutdown of each VM by 60 seconds. However, that is not what happened. Instead, the server shutdown in under a minute. When I powered the server back on, only 2 VM's properly loaded. The other 2 showed the following error: "Power on Virtual Machine" failed to complete If these problems problems persist, please contact your system administrator. Details: Cannot open the disk '[location to .vmdk]' or one of the snapshot disks it depends on. Reason: Failed to lock the file. Obviously, if this error occured, then it is clear to me that the VM's were not properly shutdown, or the server powered off before the VM's were completely shutdown. I have fixed the above error by deleting the .lck files in the respective VM directories. How would I know if the VM's were properly shut down? I checked the VMware-server logs, but they only seem to display the logs of when the vmware-mgmt service is running in the current session. I'm mostly running Linux VM's, so is there an easy way to know whether or not a server was properly shut down in Linux? Thank you all for the help!

  Read the article

< Previous Page | 368 369 370 371 372 373 374 375 376 377 378 379  | Next Page >