Search Results

Search found 25182 results on 1008 pages for 'ask'.

Page 373/1008 | < Previous Page | 369 370 371 372 373 374 375 376 377 378 379 380  | Next Page >

  • VertTwoFingerScroll and VertEdgeScroll not settable via xorg.conf

    - by James Wood
    I've just upgraded to Saucy (this was working in Raring). I've tried rebooting. Here's /etc/X11/xorg.conf: Section "InputClass" Identifier "Touchpad" Driver "synaptics" MatchIsTouchpad "on" Option "PressureMotionMinZ" "60" Option "MaxTapMove" "4" Option "PalmDetect" "1" Option "VertTwoFingerScroll" "1" Option "VertEdgeScroll" "0" EndSection And here's the output from synclient: LeftEdge = 100 RightEdge = 2408 TopEdge = 71 BottomEdge = 1249 FingerLow = 1 FingerHigh = 1 MaxTapTime = 180 MaxTapMove = 4 MaxDoubleTapTime = 180 SingleTapTimeout = 180 ClickTime = 100 EmulateMidButtonTime = 75 EmulateTwoFingerMinZ = 282 EmulateTwoFingerMinW = 7 VertScrollDelta = 56 HorizScrollDelta = 56 VertEdgeScroll = 1 HorizEdgeScroll = 1 CornerCoasting = 0 VertTwoFingerScroll = 0 HorizTwoFingerScroll = 0 MinSpeed = 1 MaxSpeed = 1.75 AccelFactor = 0.0705716 TouchpadOff = 2 LockedDrags = 0 LockedDragTimeout = 5000 RTCornerButton = 2 RBCornerButton = 3 LTCornerButton = 0 LBCornerButton = 0 TapButton1 = 1 TapButton2 = 3 TapButton3 = 0 ClickFinger1 = 1 ClickFinger2 = 1 ClickFinger3 = 0 CircularScrolling = 0 CircScrollDelta = 0.1 CircScrollTrigger = 0 PalmDetect = 1 PalmMinWidth = 10 PalmMinZ = 200 CoastingSpeed = 20 CoastingFriction = 50 PressureMotionMinZ = 60 PressureMotionMaxZ = 160 PressureMotionMinFactor = 1 PressureMotionMaxFactor = 1 ResolutionDetect = 1 GrabEventDevice = 1 TapAndDragGesture = 1 AreaLeftEdge = 0 AreaRightEdge = 0 AreaTopEdge = 0 AreaBottomEdge = 0 HorizHysteresis = 14 VertHysteresis = 14 ClickPad = 0 Notice that PressureMotionMinZ, MaxTapMove and PalmDetect are as specified in xorg.conf, but VertEdgeScroll and VertTwoFingerScroll aren't. I can set them temporarily via synclient VertEdgeScroll=0 and synclient VertTwoFingerScroll=1, but these changes are lost when I reboot. What's the best way of fixing this?

    Read the article

  • Grub Rescue Unknown Filesystem Error. Grub Corrupted or Filesystem?

    - by nightcrawler
    Now it has happened twice & have been pulling my hairs now... I have installed xubuntu on my external hardisk & have been using it for about 3 months. It has three partitions, one of 500 mb mounted at /boot, 2nd one of 48gb mounted at / & the rest (out of 160gb) is ntfs partition....used as normal external storage. The last storage supposedly acts as a buffer b/w Linux distributions & Win platform, buffer in the sense that it provides a universal channel for data transfers. I have constantly used this external hardisk for data transfers b/w win7 laptop & xubuntu (on this external hd) without any hassle. However, on of my desktops where I have ubuntu I (for the first time) attached this external drive which let me do data transfers where all three partitions properly mounted....but then nasty thing occurred the same that occurred before. I (as usual) tried booting via this external hd (one having xubuntu, one having being formerly used under Ubuntu) I got error Now I am totally devastated because similar thing happened ~6months before when I had fedora 17 in my external hd (instead of xubuntu) & after it was used under ubuntu the same happened...i didn't reported it because I already had planned towards debian instead of rpm! The mystery is that as long as I don't attach this external hd under ubuntu the data never** corrupts whereas under win xp/7 I can use it as a normal usb storage of coarse linux partitions aren’t available under win platforms... **From corrupts I mean hd fails to boot with the error mentioned however cant say whether data within remains untouched? It seems that my grub & or MBR is corrupted. Please sir guide me to solve this issue also why I cant attach & use linux external hds under linux platform Disk /dev/sdc: 160.0 GB, 160041884672 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581806 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0004e7d0 Device Boot Start End Blocks Id System /dev/sdc1 * 2048 976895 487424 83 Linux /dev/sdc2 978942 96874495 47947777 5 Extended /dev/sdc3 96874496 312575999 107850752 7 HPFS/NTFS/exFAT /dev/sdc5 978944 94726143 46873600 83 Linux /dev/sdc6 94728192 96874495 1073152 82 Linux swap / Solaris I can recall for sure that have seen a thread here when a similar problem occurred & in response someone gave solution of how to mount (now invisible) partitions & recover important data in them. I have misplaced that URL so if any can guide me thither because my important documents resides in / partition What I already have done: Without success I have tried this & related solutions What I plan to do: I believe that filesystem has corrupted & would you recommend solution like this provided I cant recall whether my /boot (500mb) partition was ext4 or ext2 though I am sure that my / (48gb) partition was ext4 UPDATE 1 Attached my external hd under Ubuntu ran followinf command as root grub-install /dev/sdc where /dev/sdc was my external hd containing corrupted xubuntu....it reported all done! I re-ran fdisk -l but to my disappointment it reported Disk /dev/sdc: 160.0 GB, 160041884672 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581806 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x1b6b9167 Disk /dev/sdc doesn't contain a valid partition table ...& now I can't even access its ntfs partition (former /dev/sdc3) please help? UPDATE 2 TestDisk (by cgsecurity) failed at founding any partition table :( TestDisk 6.13, Data Recovery Utility, November 2011 Christophe GRENIER <[email protected]> http://www.cgsecurity.org Disk /dev/sdc - 160 GB / 149 GiB - CHS 19457 255 63 Partition Start End Size in sectors

    Read the article

  • cowbuilder --create --distribution lucid fails

    - by Daenyth
    I'm trying to create a build environment for Lucid, and calling cowbuilder --create --distribution lucid fails with the messages below: Get:1 http://us-east-1.ec2.archive.ubuntu.com lucid Release.gpg [189B] Hit http://us-east-1.ec2.archive.ubuntu.com lucid Release Hit http://us-east-1.ec2.archive.ubuntu.com lucid/main Packages Fetched 189B in 0s (2376B/s) Reading package lists... I: Obtaining the cached apt archive contents Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Reading package lists... Building dependency tree... apt is already the newest version. Package cowdancer is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source E: Package cowdancer has no installation candidate I: unmounting dev/pts filesystem I: unmounting proc filesystem pbuilder create failed forking: rm -rf /opt/cowbuilder

    Read the article

  • How to move ubuntu 12.04 on another drive

    - by Maksim
    How I can move my ubuntu on another drive? I know about clonezilla but problem is that destination drive is smaller the source one. Gparted can't copy-paste partition if destination not the end last partition. I tried dpkg --selected-packages and apt-clone. First one just not install all my packages and removed existed that now I have no full unity and not my all packages. Second one just fail on configuration package. But before I did that way I copy-paste my /etc to new system. My partition table destination : gpt 1 1049kB 106MB 105MB fat32 EFI System ??????????? 2 106MB 12,1GB 12,0GB ext4 3 12,1GB 66,3GB 54,2GB ext4 source: msdos 1 1049kB 12,0GB 12,0GB primary ext4 ??????????? 2 12,0GB 492GB 480GB primary ext4 3 492GB 500GB 8107MB primary linux-swap(v1) Gpt not working with ubuntu that use grub 1.99. I don't know why but my laptop can't boot any device with uefi just black screen and ubuntu detect it on fresh install.

    Read the article

  • How to mount read-only filesystem as read-write?

    - by Eric
    this is my problem. I have a USB drive which somehow was set as read-only. I want to set it as read write then format it. sudo chown -R eric /dev/sdb Seems to go through, but when I view the drive in Nautilius it says Error mounting: mount: block device /dev/sdb1 is write-protected, mounting read-only mount: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or helper program, or other error In some cases useful inf.o is found in syslog - try dmesg | tail or so. Thanks in advance!

    Read the article

  • How can I create a symlink to the location that Ubuntu 10.10 mounts a CD?

    - by Michael Curran
    In Ubuntu 10.10, when I insert a CD or DVD into my optical drive, the system mounts the CD in a folder called /media/XYZ where XYZ is the disk's label. This has cause problems with Wine, as in order for an application to verify that an application's CD is present, Wine uses a symlinks to point to a mounted CD's folder. In this case, that folder must be /media/XYZ, but when using a different application, the folder would be different. I would like to know if there is a way to create a symlink that will always point to the mounted folder from a given /dev/cdrom* device, or how to force the system to always mount CDs to the same address (i.e. /media/cdrom).

    Read the article

  • How do you force Ubuntu to unmount a disk when you press the eject button on an optical drive?

    - by Michael Curran
    When upgrading my hardware, I also upgraded to Ubuntu 10.10. On my previous system (with 10.04 and earlier) when I ejected a disk from the optical drive, the subfolder in the /media directory was automatically removed. In my new 10.10 system, if I don't eject the disk using the "eject" command within the system, the disk remains mounted, even after a new disk is installed. The new drive is a Blu Ray drive, but I haven't noticed any other problems from it. Normally, this isn't a problem, but it makes installing applications that are spread over multiple CDs more difficult in many cases (i.e. Wine). Any advice?

    Read the article

  • Cheap sound on speakers - Dell XPS L502X

    - by Rafael
    I have a new machine that comes with JBL 2.1 Speakers with Waves Maxx Audio 3. On Windows it sounds perfect, though in Ubuntu 12.04 I get cheap/sound with simple mp3 files. I have tried a few things on different blogs but no luck so far. Any ideas? aplay -l **** List of PLAYBACK Hardware Devices **** card 0: PCH [HDA Intel PCH], device 0: ALC665 Analog [ALC665 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 1: ALC665 Digital [ALC665 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: N700 [Logitech Speaker Lapdesk N700], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0

    Read the article

  • Need new developers-laptop, with ubuntu. Multiple ext displays, ssd, dock, NO DVD [closed]

    - by Ole Morten Amundsen
    I'm having a really hard time finding a great alternative for Macbook Pro (I have a MB pro '08). I'd like to return to ubuntu and need a kick-ass laptop. If you help, you've lead me back to linux :) Req: ubuntu friendly lots of memory 8G+ ssd 160GB+ great processor (intel sandy?) connect up to three external displays. this triple display looks cool No optical drive, NO DVD 13-17" dock. In place of the ridiculous optical drive (It's like having a floppy drive IMO): extra battery? 2nd ssd? extra graphics card? your suggestion The laptop should be designed for not having dvd. I can't find many, unless they are tiny 11"... I'm exited to know your answers!

    Read the article

  • Mount to /dev/sdb1 without password

    - by Jarmo
    I am unable to mount a USB drive (or SD card) to my system without root access. When I plug in a USB drive, it is visible in the left column of Nautilus, but when I click on it to open it, I receive the error message Unable to mount 2.1 GB Filesystem Error mounting: mount exited with exit code 1: helper failed with: mount: only root can mount /dev/sdb1 on /media/sdb1 I am able to mount the drive using sudo mount -w /dev/sdb1, but this causes problems for operations such as creating startup discs, which requires unmounting and remounting the drive. I suspect this problem may be caused by the fact that when I upgraded from 11.10 to 12.04, I had an SD card plugged in. This caused the system to stall during later startups, as it could not find this drive. I remedied this by editing a line of /etc/fstab to read /dev/sdb1 /media/sdb1 vfat noauto 0 0 However, I am dual booting Ubuntu with Windows XP, and I have no problem mounting the C: drive of the Windows system without root access, so I feel that this is a problem related to the mount point rather than mounting in general.

    Read the article

  • Wifi - wireless network not working after installing Ubuntu 12.04

    - by Nilesh
    I had installed ubuntu 12.04 in my Dell Vostro 3460. Initially wired as well wireless both are not working. After installing compat-wireless-2012-07-03-pc.tar.bz2 wired network fine but wireless is not working. Previously both were working fine with ubuntu 11.10. Also presently both network are working fine in Win7. lspci: 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Ivy Bridge PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.4 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 5 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 0de9 (rev a1) 02:00.0 Network controller: Broadcom Corporation Device 4365 (rev 01) 03:00.0 Ethernet controller: Atheros Communications Inc. AR8161 Gigabit Ethernet (rev 10) iwconfig: lo no wireless extensions. eth0 no wireless extensions. ifconfig: eth0 Link encap:Ethernet HWaddr 84:8f:69:d4:35:9b inet addr:10.24.22.72 Bcast:10.24.31.255 Mask:255.255.224.0 inet6 addr: fe80::868f:69ff:fed4:359b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:15332 errors:0 dropped:0 overruns:0 frame:0 TX packets:10425 errors:0 dropped:0 overruns:0 carrier:1 collisions:0 txqueuelen:1000 RX bytes:9262594 (9.2 MB) TX bytes:1572030 (1.5 MB) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1432 errors:0 dropped:0 overruns:0 frame:0 TX packets:1432 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:145656 (145.6 KB) TX bytes:145656 (145.6 KB)

    Read the article

  • How to fix "Disk drive for /boot/efi is not ready or not present"?

    - by N.N.
    After I updated BIOS/UEFI version to 1101 on an Asus P8Z68-V PRO motherboard Ubuntu (11.10) did not boot. After POST all I saw was a black screen with a blinking cursor in the top left corner. I booted an Ubuntu 11.10 live-CD and set the flag for the 20 MB partition before my boot partition to "bios_grub". Then I was able to boot and login. But now every time I boot and Ubuntu loads I get the following message: Disk drive for /boot/efi is not ready or not present. Continue waiting or press s to skip or m for manual recovery. I am able to login if I choose to ignore it by pressing s, but what does this message mean? How can I fix what the message warns about? After logging in I have noticed that /boot/efi is empty. The following forum post speaks of the same issue ubuntuforums.org/showthread.php?t=1893030. Updating to the latest BIOS/UEFI - version 3203, did not have any effect on this issue.

    Read the article

  • How to change ownership for an external HDD?

    - by Angstrem
    I've got an external HDD (640 GB), with file system FAT32. I want to change the ownership of it from root (default) to angstrem (my username). The system is mounted to /media/exthdd. I try to do that by a command: sudo chown -vR angstrem:angstrem /media/exthdd and after that the system gives me an error: chown: changing ownership of `/media/exthdd': Operation not permitted If anybody knows, please tell me, how to change ownership of that HDD?

    Read the article

  • How to recover broken dpkg after lucid-bleed ppa-purge?

    - by TryTryAgain
    Did a ppa-purge of lucid-bleed and dpkg didn't downgrade properly and now it is broken. dpkg: PreDepends: tar (>= 1.23) but 1.22-2ubuntu1 is to be installed What scares me is when simulating the removal of dpkg I get: Removing this package may render the system unusable. Are you sure you want to do that? and then the list of packages which depend on it, which will also be removed, is obviously very long. Is it safe for me to remove dpkg just to reinstall it? How would I ensure the list of packages which were also removed are then reinstalled? Will forcing the version of dpkg help? (FYI: simulating a forced version brings up a much smaller list of applications which will also be removed). Any other suggestions? Additional information based on comments: ppa-purge log: http://pastebin.com/1kT8cLvP If I sudo apt-get install dpkg=1.15.5.6ubuntu4.5 I get The following packages have unmet dependencies: libdpkg-perl: Depends: dpkg (= 1.15.8) but 1.15.5.6ubuntu4.5 is to be installed which sucks because that means more would be broken after doing so...but when I force the version through Synaptic I get: To be removed alien, build-essential, cdbs, checkinstall, debhelper, devscripts, dpkg-dev, google-earth-stable, googleearth-package, libdpkg-perl, lintian, lsb, lsb-core, lsb-cxx, lsb-desktop, lsb-graphics, lsb-languages, lsb-multimedia, lsb-printing, lsb-qt4, lsb-security, ubuntu-dev-tools.

    Read the article

  • Port 21 will not open. status is closed. forward port 21 to new domains.

    - by Bob Swaggerty
    I am having a problem opening port 21 on my Linux Ubuntu server. No matter what i do, i can not get my status to change from closed to open. Here is a recent iptables command i used and the result iptables -A INPUT -p tcp -m tcp --dport 21 -j ACCEPT nmap -p21-22,25,80,443 CCR1 Starting Nmap 4.53 ( http://insecure.org ) at 2012-06-19 03:13 CDT Interesting ports on CCR1.chennaichristianradio.com (5.10.69.98): PORT STATE SERVICE 21/tcp closed ftp 22/tcp open ssh 25/tcp closed smtp 80/tcp open http 443/tcp closed https I also used commands from the advise from this forum http://www.cyberciti.biz/faq/iptables-open-ftp-port-21/ I need to open this for FTP access to the server, and ultimately I need to forward port 21 to 2 domains i am setting up. Thank you for any assistance you can provide -Bob Swaggerty

    Read the article

  • What is the right way to Windows 7/Ubuntu 10.10 Dual-Triple Boot Partitioning for Laptop OEM?

    - by Denja
    Hi Linux Community, I find my self struggling with the ever slow and buggy windoze OS once again. It's Time to change with the Ubuntu 10.10 64bit as a really faster Operating System. My Hard Disk laptop as a RECOVERY and HP_TOOLS partition they are both Primary. I Have the System Recovery DVD for Windows 64bit should anything happen. Here's the layout I used with windows before: * (C:) Windows 7 system partition NTFS - 284,89GB (Primary,Boot,Pagefile,Dump) * HP_TOOLS system partition FAT32 - 99MB (Primary) * (D:) RECOVERY partition NTFS - 12,90GB (Primary) * SYSTEM partition NTFS 199MB (Primary) Here's the layout I want to make based on your answers * (C:) Windows 7 system partition NTFS - 60GB (Primary) (sda1) * (D:) Windows DATA partition (user files) NTFS - 120GB(Primary)(sda2);wanna share with Linux * Linux root Ext4 - 100GB (Primary)(sda3) (Ubuntu 10.10 64bit) * Linux swap swap- RAM size, 3GB (sda4) * Linux root Ext3- 15,9GB (Extended)(sda5) (OpenSuse or Puppy) Here is my New Ubuntu 10.10 64bit layout in use now: * SYSTEM partition NTFS 199MB (Primary) (sda1) **Partition 1 does not end on cylinder boundary.(?)** * (C:) Windows 7 system partition NTFS - 90GB (Primary) (sda2) * (D:) Windows 7 RECOVERY partition NTFS - 12,90GB (Primary) (sda3) * Linux system partition EXTENDED - 195GB (Logical) * Linux root Ext4- 10GB (Extended) (sda5) * Linux home Ext3- 185GB (Extended) (sda6) I didn't know if I could wipe all previous partitions when i installed Ubuntu because of the RECOVERY partition so I just made the space for my extended partition by deleting the HP_TOOLS (Fat32). By doing this I managed to make and successfully install Ubuntu 64 but I couldn't actually make the partition for the swap or a third Linux OS. Question 1: What is the right way to Windows 7/Ubuntu 10.10 Dual-Triple Boot Partitioning for Laptop OEM?? Thank you in advance for your advises and suggestions and Happy New Year to All!!

    Read the article

  • Using local repository with vmbuilder and https

    - by Onitlikesonic
    I seem to be having problems using vmbuilder with a local https mirror "--mirror=https:///archive.ubuntu.com/ubuntu/" as shown below: Process (['/usr/sbin/debootstrap', '--arch=amd64', 'precise', '/tmp/tmpYc0cOktmpfs', '<my_internal_server>/ubuntu/']) returned 1. stdout: I: Retrieving Release E: Failed getting release file <my_internal_server>/ubuntu/dists/precise/Release , stderr: 2012-10-18 10:36:36,429 INFO : Unmounting tmpfs from /tmp/tmpYc0cOktmpfs Traceback (most recent call last): File "/usr/bin/vmbuilder", line 24, in <module> cli.main() File "/usr/lib/python2.7/dist-packages/VMBuilder/contrib/cli.py", line 216, in main distro.build_chroot() File "/usr/lib/python2.7/dist-packages/VMBuilder/distro.py", line 83, in build_chroot self.call_hooks('bootstrap') File "/usr/lib/python2.7/dist-packages/VMBuilder/distro.py", line 67, in call_hooks call_hooks(self, *args, **kwargs) File "/usr/lib/python2.7/dist-packages/VMBuilder/util.py", line 165, in call_hooks getattr(context, func, log_no_such_method)(*args, **kwargs) File "/usr/lib/python2.7/dist-packages/VMBuilder/plugins/ubuntu/distro.py", line 136, in bootstrap self.suite.debootstrap() File "/usr/lib/python2.7/dist-packages/VMBuilder/plugins/ubuntu/dapper.py", line 269, in debootstrap run_cmd(*cmd, **kwargs) File "/usr/lib/python2.7/dist-packages/VMBuilder/util.py", line 120, in run_cmd raise VMBuilderException, "Process (%s) returned %d. stdout: %s, stderr: %s" % (args.__repr__(), status, mystdout.buf, mystderr.buf) VMBuilder.exception.VMBuilderException: Process (['/usr/sbin/debootstrap', '--arch=amd64', 'precise', '/tmp/tmpYc0cOktmpfs', '<my_internal_server>/ubuntu/']) returned 1. stdout: I: Retrieving Release E: Failed getting release file <my_internal_server>/ubuntu/dists/precise/Release , stderr: I've checked that the files are in the correct place and i'm able to setup this using http instead of https. However this server will be providing https access only to the repos, the http is only temporarily open. This might be due to the certificate not being valid on the https (since it's self signed) or due to the fact that vmbuilder doesn't support https? In either case how can i get this to work? (If it's the case of the invalid certificate I don't mind ignoring any checks)

    Read the article

  • Keeping files that are often changed in sync between desktop and laptop

    - by N.N.
    I'm looking for a way to keep a desktop and a laptop in sync. What I want to keep in sync are some folders, mainly ~/Documents, that are changed often when working on them. If it matters I can connect to my desktop from anywhere via an URL but my laptop is harder to access since it might be behind NAT and such. I have been looking at Ubuntu One but it seems to not go well with working on documents written in LaTeX. If I work on a .tex file in the Ubuntu One directory and compile it (with pdflatex) every now and then (as often as every 10 sec when working) it will create several new files including a pdf which are uploaded to Ubuntu One and this seems stupid since it will create continuous upload when working on .tex files. I also usually keep .tex documents version controlled by git and then every commit (which also can happen frequently) will cause upload (by changes in ./.git) so that it happens continuously when working. Another example is editing images that are saved often. What I think would be best is for sync to happen every tenth minute or at the end of every working session (but there might be some other way to handle this?).

    Read the article

  • Hostapd to connect laptop to Android

    - by Kmegamind
    i am trying to set up my laptop as an access point for my Android to use WiFi, so i knew that ubuntu sets the network as Ad-Hoc which is not discoverable by android, So i tried the method explained here -which i found on many other websites- but when i run hostapd.conf this error appears : nl80211: Failed to set interface wlan0 into AP mode nl80211 driver initialization failed. ELOOP: remaining socket: sock=4 eloop_data=0x8e488f8 user_data=0x8e48ea0 handler=0x807c5e0 ELOOP: remaining socket: sock=6 eloop_data=0x8e4aca8 user_data=(nil) handler=0x8086770 this is how my hostapd.conf looks like : interface=wlan0 driver=nl80211 ssid=Any_SSID_name hw_mode=g channel=1 macaddr_acl=0 auth_algs=1 ignore_broadcast_ssid=0 wpa=2 wpa_passphrase=Any_password wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP rsn_pairwise=CCMP and this is my wireless card info : description: Wireless interface product: BCM43225 802.11b/g/n vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:05:00.0 logical name: wlan0 version: 01 serial: 78:e4:00:73:51:f1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=brcmsmac driverversion=3.2.0-31-generic-pae firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:f0300000-f0303fff

    Read the article

  • help bonding streaming rtp 3g

    - by enrique
    first sorry for contact me here. Recuro to you after reading all the material I found about it and so it does not get set. My question is: I can configure load balancing in any way out? I have a hub with 3 USB 3G modems, I got the 3 simultaneously connect with an upload speed of about 500kb in each approx. and a dynamic ip each. I do a unicast streaming with vlc rtp with a bandwidth of 1.5mb. Bone the sum of the three modems. I was searching on ifenslave, iproute. Then I found a draft vlc MultiCat. I understood that this could end, but configure it only moves a card. If I can help extend the information willingly. From now eternally grateful.

    Read the article

  • watchdog/0 process using all my CPU suddenly

    - by jeffery_the_wind
    I have a fresh installation of Ubuntu 12.04, I have been running it for about a week. Suddenly today I noticed my computer freezes every 5 seconds. I restarted the computer and I still get this. I believe it is a process called watchdog/0 that is using all the resources. See the attached pictures. How can I stop this? I can barely use my computer like this. UPDATE Well I just did a cold reboot, (shutdown, unplug, and plug back in, and turn on) and it seems to have fixed it. After looking at the man page for watchdog, it seems that this process may stay on during a restart? so it is more like a soft restart? Why that happens I don't know.

    Read the article

  • Windows 7 not booting from Ubuntu 12.10 boot menu

    - by Raj Inevitable
    Am having windows 7 in one hard drive. I installed Ubuntu in second hard drive. Am configured BIOS to boot second hard drive first (Ubuntu OS). and then i updated grub, so its shows windows 7 in the boot list. I can boot in to ubuntu, but i can't boot into windows 7, its shows error A disk read error occured Press Ctrl+Alt+Del to restart . then am configured BIOS again to load windows 7 first, it shows windows 7 and ubuntu in the boot list, windows 7 is working, but i can't boot into ubuntu.. Help to solve this problem.. i want dual boot from any one of the drive...

    Read the article

  • Allow any arguments for a given command with sudo

    - by Mark L
    I have the following sudo config entry which I added via sudo visudo: mark ALL = NOPASSWD: /usr/bin/lxc-ls* I can run lxc-ls with my user fine but I can't append any parameters without it demanding I prefix the command with sudo. $ whoami mark $ lxc-ls test-container $ lxc-ls --fancy lxc-ls: error: You must be root to access advanced container properties. Try running: sudo /usr/bin/lxc-ls Any idea how I can edit via sudo visudo to allow for any argument after the command? I don't want to prefix the command with sudo as I'm using a python library to execute the command and it's being funny about sudo prefixes.

    Read the article

  • Probelm with ATI catalyst drivers in ubuntu 13.10

    - by Raja
    Recently I've installed dual boot ubuntu 13.10 alongside windows 8. My Laptop is Dell Inspiron 15, with AMD Radeon HD 7670 Video Card. Without fglrx my battery is draining to 1:30 hrs from 3:30hrs (In Ubuntu 13.04 but very slow booting ) so I installed fglrx using What is the correct way to install ATI Catalyst Video Drivers (fglrx)? But the problem is as you all know, Black Screen after logging into ubuntu. Tried so many solutions for this like reinstalling unity , ubuntu-desktop , compizconfig , etc.. but none helped except removing fglrx* completely. (But I need them very badly due to battery) Assuming that all hope is lost., Posting here as a final try.! Will be highly greatfull for those who helped :) PS : For those who think this question is a duplicate., Though the question may be a duplicate, but the answer is not! (so give me a assured solution for this problem before flagging this as duplicate., Kindly understand my frustation) Thank You !

    Read the article

  • Ubuntu 12.10: Installing proprietary Nvidia driver causes freeze at boot

    - by Greg
    Ok, so I just installed Ubuntu on my laptop, and I immediately encountered an issue: the HDMI audio output won't work. Yes, I know about the sound settings thing where you have to select the HDMI option, but even when it's selected I get no sound out of the TV I'm hooking it up to. This is a dealbreaker for me, because my laptop speakers are terrible, it's one of the big reasons I use my TV monitor. So I decided to work on solving the problem by upgrading my Nvidia drivers. I switched to one of the propriety drivers offered in that software updating utility that comes with the OS, the one option that said (tested). Viola, sound over the HDMI is now working. Unfortunately, this now brings me to my next problem: when I reboot Ubuntu with this or any other proprietary driver installed, it freezes when it tries to load my desktop. As in I can see my wallpaper, but no icons or options of any kind. The system is totally frozen, and gives me one of those "we've experienced an error, do you want to report it messages." So there's my bind. I need HDMI audio out, that's a total dealbreaker for me, but installing the drivers that give me that capability crash the system. Does anyone have any idea what's causing this

    Read the article

< Previous Page | 369 370 371 372 373 374 375 376 377 378 379 380  | Next Page >