Search Results

Search found 12375 results on 495 pages for 'red black tree'.

Page 375/495 | < Previous Page | 371 372 373 374 375 376 377 378 379 380 381 382  | Next Page >

• How to fix display on external Samsung Syncmaster shifted to the right when connected to Macbook Pro?

  - by joe larson

  Is there something special I need to do to be able to use external LCD displays with my new MacBook Pro? Do I need extra software, or do I possibly need a different cable? I'm attempting to use an external display with my MBP. I've got a "Mini DisplayPort to VGA Female Adapter for Mac", plugged into the thunderbolt port on my MBP, which I understood should be compatible with thunderbolt. I've tried this with three different SyncMaster models: a B2330 (21.5"), a EX2220 (22"), and a third (also 22" ish) which I don't have the model # for -- but all are 1920x1080 resolution; plus an additional HP monitor of similar size and resolution. In all four cases, the MBP recognizes the screen and choses the correct resolution. However, the display is shifted over about 1 inch. This is true no matter if I change screen resolutions also. The controls on the monitor for horizontal position don't help. Also, sometimes (especially if I drag an app over into the second screen), the screen starts skipping left to right and having bands of fuzz. Additionally, the monitor will periodically blink off for a moment, trying to switch from Digital to Analog and back (the Syncmaster shows text on the screen to tell you it's trying to do this). Often when it comes back from one of these blank-outs, it will show OK (no skipping or fuzz) but still shifted right; then after a few seconds it will go wrong again skipping and fuzzy. This photo shows the worst of it. I've added red rectangles to show the physical edge of the screen, and a yellow rectangle to show the empty space on the left of the screen. (Sorry for the awful quality and lighting!) Also, it's worth noting I am on Mac OS X 10.6.7, and yes I have this update 1.4 installed.

  Read the article

• A star vs internet routing pathfinding

  - by alan2here

  In many respects pathfinding algorythms like A star for finding the shortest route though graphs are similar to the pathfinding on the internet when routing trafic. However the pathfinding routers perform seem to have remarkable properties. As I understand it: It's very perfromant. New nodes can be added at any time that use a free address from a finite (not tree like) address space. It's real routing, like A*, theres never any doubling back for example. IP addresses don't have to be geographicly nearby. The network reacts quickly to changes to the networks shape, for example if a line is down. Routers share information and it takes time for new IP's to be registered everywhere, but presumably every router dosn't have to store a list of all the addresses each of it's directions leads most directly to. I can't find this information elsewhere however I don't know where to look or what search tearms to use. I'm looking for a basic, general, high level description to the algorithms workings, from the point of view of an individual router.

  Read the article

• Integration of SharePoint 2010 with TFS2010

  - by Kabir Rao

  We have performed following steps as of now- Install TFS2010 10.0.30319.1 (RTM) on Windows Server 2008 R2 Enterprise(app tier) SQL 2008 SP1 with Cumulative update 2 on Windows Server 2008 R2 Enterprise(data tier) Reporting Service is installed on app tier. After this installation worked fine we installed SharePoint 2010 on app tier. After installation we followed http://blogs.msdn.com/b/team_foundation/archive/2010/03/06/configuring-sharepoint-server-2010-beta-for-dashboard-compatibility-with-tfs-2010-beta2-rc.aspx for configuration. We are not able to perform the last step described in the link as following error occured- TF249063: The following Web service is not available: http://apptier:31254/_vti_bin/TeamFoundationIntegrationService.asmx. This Web service is used for the Team Foundation Server Extensions for SharePoint Products. The underlying error is: The remote server returned an error: (404) Not Found.. Verify that the following URL points to a valid SharePoint Web application and that the application is available: http://apptier:31254. If the URL is correct and the Web application is operating normally, verify that a firewall is not blocking access to the Web application. We have also noticed that Document Folder in Team project also have red x. Please help. Thanks upfront.

  Read the article

• Why do I often have to refresh pages I navigate to once for them (or content in them) to load?

  - by GetOutOfBox

  I have noticed a bizarre pattern when using my PC, that when I open a link to a website, it often will often take a very long time to load, or time out. Sometimes content on the website will be drawn, but again, it seems to get "stuck" for an unusual amount of time before finishing. Most affected is Youtube; almost every time I navigate to a youtube video from another website such as Google, the video will not begin playing, but will instead just display the player controls with a black screen where the video should be and the buffering symbol, usually before displaying an error such as "The video failed to load". The unusual part of this problem is that whenever this happens, refreshing the page always causes it to load almost immediately the second time around, without any problems. Note that I'm not talking about how some browsers will dump whatever has been cached to the "pallet" briefly when the page is refreshed or loading stopped; but that the second time loading the website being faster. I have done my best to rule out some of the obvious causes: My Windows 7 desktop computer is the only device that seems to be affected. I use Firefox on it (latest version, flash updated, etc). My connection has more than enough bandwidth (30 megabits down, 4 up), and I've even tried QoSing all other devices to make sure this isn't happening due to usage spikes. Wireshark is not showing any clearly unusual network activity (i.e frequently dropped packets).

  Read the article

• Identify differences between MP3 files

  - by Thingomy

  I have 2 old similar directory trees with MP3 files in them. I am happily using tools like diff and Rsync to identify and merge the files that are only present on one side, or are identical, I'm left with a bunch of files that are bitwise different. On running diff over a pair actually different files, (with -a tag to force text analysis) it produces incomprehensible gibberish. I have listened to files from both sides, and they both seem to play fine (but at nearly 10 minutes per song, when listening to them twice each, I haven't done many) I suspect the differences are due to some player in the past "enhancing" my collection by messing about with ID3 tags, but I can't be certain. Even if I identify differences in ID3 tags, I would like to confirm that no cosmic ray or file copy error issues have damaged any of the files. One method that occurs to be is finding the byte locations of the differences, and ignoring all changes in the first ~10kb of each file, but I don't know how to do this. I have on the order of a hundred or so files that differ across the directory tree. I found How to compare mp3, flac audio data in a file, ignoring header data (ID3 tag) etc.? -- but I can't run alldup due to being Linux only, and from the sounds of it, it would only partially solve my issues anyway.

  Read the article

• Unable to send mail to hotmail from rackspace cloud

  - by Jo Erlang

  I'm having issue sending mail from postfix on a rackspace cloud instance for my domain. Hotmail says "550 SC-001 (SNT0-MC4-F35) Unfortunately, messages from 198.101.x.x weren't sent. Please contact your Internet service provider since part of their network is on our block list. " Here is the mail log Sep 20 08:02:59 mydomain postfix/smtpd[1810]: disconnect from localhost[127.0.0.1] Sep 20 08:02:59 mydomain postfix/smtp[1814]: 59CFF4B191: to=<[email protected]>, relay=mx3.hotmail.com[65.55.92.184]:25, delay=0.19, delays=0.1/0.01/0.06/0.01, dsn=5.0.0, status=bounced (host mx3.hotmail.com[65.55.92.184] said: 550 SC-001 (SNT0-MC4-F35) Unfortunately, messages from 198.101.x.x weren't sent. Please contact your Internet service provider since part of their network is on our block list. You can also refer your provider to http://mail.live.com/mail/troubleshooting.aspx#errors. (in reply to MAIL FROM command)) Sep 20 08:02:59 mydomain postfix/smtp[1814]: 59CFF4B191: lost connection with mx3.hotmail.com[65.55.92.184] while sending RCPT TO I have implemented rDNS, SPF and DKIM they all are looking fine. I have checked my IP and domain, on most of the spam black lists and it is listed as ok on those, (not listed as spamming IP) What should I try next?

  Read the article

• installing Conkeror on Ubuntu 12.04

  - by Menelaos Perdikeas

  I am reading the instructions on conkeror site (and elsewhere) on how to install conkeror on Ubuntu (I am using Ubuntu 12_04 LTS) and it seems that the correct sequence is: sudo apt-add-repository ppa:xtaran/conkeror sudo apt-get update sudo apt-get install conkeror conkeror-spawn-process-helper The first step (apt-add-repository) seems to execute without a problem, giving the following output: You are about to add the following PPA to your system: Conkeror Debian packages for Ubuntu releases without xulrunner (i.e. for 11.04 Natty and later) More info: https://launchpad.net/~xtaran/+archive/conkeror Press [ENTER] to continue or ctrl-c to cancel adding it Executing: gpg --ignore-time-conflict --no-options --no-default-keyring --secret- keyring /tmp/tmp.Re7pWaDEQF --trustdb-name /etc/apt/trustdb.gpg --keyring /etc/apt/trusted.gpg --primary-keyring /etc/apt/trusted.gpg --keyserver hkp://keyserver.ubuntu.com:80/ --recv CB29CBE050EB1F371BAB6FE83BE0F86A6D689050 gpg: requesting key 6D689050 from hkp server keyserver.ubuntu.com gpg: key 6D689050: "Launchpad PPA for Axel Beckert" not changed gpg: Total number processed: 1 gpg: unchanged: 1 However, the apt-get update seems unable to fetch packages from the newly added PPA, with its output ending in: Hit http://security.ubuntu.com precise-security/restricted Translation-en Hit http://security.ubuntu.com precise-security/universe Translation-en Err http://ppa.launchpad.net precise/main Sources 404 Not Found Ign http://extras.ubuntu.com precise/main Translation-en_US Err http://ppa.launchpad.net precise/main i386 Packages 404 Not Found Ign http://extras.ubuntu.com precise/main Translation-en Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en W: Failed to fetch http://ppa.launchpad.net/xtaran/conkeror/ubuntu/dists/precise /main/source/Sources 404 Not Found W: Failed to fetch http://ppa.launchpad.net/xtaran/conkeror/ubuntu/dists/precise/main/binary-i386/Packages 404 Not Found E: Some index files failed to download. They have been ignored, or old ones used instead. Accordingly, apt-get-install conkeror fails with: mperdikeas@mperdikeas:~$ sudo apt-get install conkeror Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package conkeror Any ideas what might be wrong ?

  Read the article

• x display problems in centos 5.5

  - by John Ruiz

  I have a Dell E510 desktop with a geForce 7200 instead of the ATI x600 it came with. I have attempted to install CentOS 5.4 x86_64 (DVD), CentOS 5.5 (net install), and CentOS 5.5 x86_64 (DVD). Gnome desktop. All of these run into the same issue. When I put the DVD into the machine and reboot, the installer begins and I select "graphical install". I see text that say anaconda is starting, and then my screen goes nuts. It's not black, but rather a screen full of diagonal stripes or multiple colors. So I attempted to do a text install of CentOS 5.5 (DVD) and got it installed. When I booted for the first time, I logged into the virtual console and started X (startx). The desktop came up and it already had the display properties GUI up. I changed it from 800x600 to 1680x1050, saw that there were updates available, installed them, and then rebooted. When I start X from the virtual console this time, I get exactly the same display problem as I described before. Does anyone know what might be causing this and what I can do about it? edit: I should also mention that I'm capable of installing Windows 7 and Ubuntu 10.04 onto this machine with absolutely no issues at all.

  Read the article

• Blinking power button

  - by Mike Ramsey

  A friend asked me to look at his Gateway DX4640 desktop. When he presses the power button, power goes to the mobo (NVIDIA nForce 630i MCP73PV, GeForce 7100 chipset) and the CPU fan starts spinning. The power button slowely blinks on and off (blue) and the screen briefly says no signal and then goes black. And nothing else; no post code beeps. My initial two conjectures were: 1. Vista was stuck in sleep/hibernation mode, or 2. A power off had left the mobo in a bad state. The fix for both is to: a) Unplug the AC power cord b) hold the power button for 30 second to fully discharge the mobo It didn't help. I left the system unplugged from AC power for an hour. No change. I am out of ideas. Has anybody seen anything like this before? What does a blinking blue power button mean? How can I get more data points to guide trouble shooting? --Thank you, --Mike

  Read the article

• Optimal file system type and mount options for an rsnapshot dedicated drive

  - by Nimmy Lebby

  We have an external USB 2 drive that we are using as a backup drive for our configuration. We use rsnapshot for the backups. It uses a few standard commands for managing snapshots: rm -rf: deletes expired snapshots mv: moves older snapshots down a slot cp -al: duplicates last snapshot to new slot rsync -a --delete --numeric-ids --relative: synchronizes new snapshot As you could see by the log below, the majority of the time is spent on the rm -rf and the cp -al steps: [25/Dec/2010:14:00:02] rsnapshot hourly: started [25/Dec/2010:14:00:02] echo 21012 > /var/run/rsnapshot.pid [25/Dec/2010:14:00:02] rm -rf /mnt/extdrive/snapshots/hourly.5/ [25/Dec/2010:14:15:48] mv /mnt/extdrive/snapshots/hourly.4/ /mnt/extdrive/snapshots/hourly.5/ [25/Dec/2010:14:15:48] mv /mnt/extdrive/snapshots/hourly.3/ /mnt/extdrive/snapshots/hourly.4/ [25/Dec/2010:14:15:48] mv /mnt/extdrive/snapshots/hourly.2/ /mnt/extdrive/snapshots/hourly.3/ [25/Dec/2010:14:15:48] mv /mnt/extdrive/snapshots/hourly.1/ /mnt/extdrive/snapshots/hourly.2/ [25/Dec/2010:14:15:48] cp -al /mnt/extdrive/snapshots/hourly.0 /mnt/extdrive/snapshots/hourly.1 [25/Dec/2010:14:23:32] rsync -a --delete --numeric-ids --relative /etc /mnt/extdrive/snapshots/hourly.0/sm4/ [25/Dec/2010:14:23:52] touch /mnt/extdrive/snapshots/hourly.0/ [25/Dec/2010:14:23:52] rm -f /var/run/rsnapshot.pid [25/Dec/2010:14:23:52] rsnapshot hourly: completed successfully My questions: I'm currently using ext4 for the filesystem. Maybe this is not the best choice from those available in Red Hat. Anyone have any recommendations that would speed up the process? The partition's mount options are sync,dirsync 1 2. Is there a way to optimize this since it's solely used for rsnapshot? Of course, reasoning would be greatly appreciated.

  Read the article

• Dependencies problems installing openjdk on Ubuntu

  - by Rodnower

  I try to install openjdk-7-jre: sudo apt-get install openjdk-7-jre But I have dependencies problems: Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: openjdk-7-jre : Depends: openjdk-7-jre-headless (= 7u7-2.3.2a-0ubuntu0.12.04.1) but it is not going to be installed Depends: libgif4 (>= 4.1.4) but it is not installable Depends: libatk-wrapper-java-jni (>= 0.30.4-0ubuntu2) but it is not installable Recommends: libgnome2-0 but it is not installable Recommends: libgnomevfs2-0 but it is not going to be installed Recommends: ttf-dejavu-extra but it is not installable E: Unable to correct problems, you have held broken packages. This is version of Ubuntu: Ubuntu 12.04.1 LTS I completely don't know how resolve dependencies... Some one can help me? Thank you for ahead.

  Read the article

• Alternatives to using email (in particular, Outlook) as a knowledge store?

  - by Umber Ferrule

  I suspect that, like many people, I use my work email account (accessed via Outlook 2007) to store information. I generally try to group similar things in folders and sub-folders, but with a multitude of folders this gets very unwieldy. In particular, it can be a bind to locate things using Outlook's tree structure. (As an aside: I've yet to come across a good free search add-on for Outlook.) I realise Outlook is not the best place to store all my information and I'd prefer not to. In an ideal world I'd like to be able to organise all of the information stored in Outlook in a MindMap (my software of choice being Freemind) or Wiki. To maintain an email audit-trail, I've considered saving individual emails as files using a MindMap or Wiki to link them. What do people think of this? (I can't say I relish the thought of the exporting process!) Whatever I do is going to involve some pain (i.e. setting up a Wiki/MindMap) or sticking with what Outlook provides currently. Has anyone been in the same position? Has anyone mass-migrated information from Outlook? If so, what was the best way? Any ideas or alternative proposals?

  Read the article

• apt-get : Size mismatch

  - by Cédric Girard

  I created a private deb repository to spread a software and it's updates to 600 Ubuntu netbooks. Each time the network is connected, my script try to do a apt-get update. But sometimes (quite often in fact), I have this : Failed to fetch https://myserver/ubuntu/dists/maverick/main/binary-i386/voosicomat.deb Size mismatch The server is an 2.2 Apache, HTTPS only. There is no error on it's logs. Here is the script : apt-get update apt-get dist-upgrade --force-yes --yes Here is the complete output of apt-get Ign https://myserver maverick Release.gpg Ign https://myserver/ubuntu/ maverick/main Translation-en Ign https://myserver maverick Release Ign https://myserver maverick/main i386 Packages/DiffIndex Ign https://myserver maverick/main i386 Packages Ign https://myserver maverick/main i386 Packages Hit https://myserver maverick/main i386 Packages Reading package lists... Reading package lists... Building dependency tree... Reading state information... The following packages will be upgraded: majdb utilitaires voosicomat 3 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 6207kB/6273kB of archives. After this operation, 0B of additional disk space will be used. WARNING: The following packages cannot be authenticated! utilitaires voosicomat majdb Get:1 https://myserver/ubuntu/ maverick/main voosicomat all 2.0.1 [4755kB] Get:2 https://myserver/ubuntu/ maverick/main majdb all 1.0.17 [1452kB] Failed to fetch https://myserver/ubuntu/dists/maverick/main/binary-i386/voosicomat.deb Size mismatch Fetched 7091kB in 21s (324kB/s) E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing? Regards Cédric

  Read the article

• Quad channel memory and compatibility

  - by balteo

  My motherboard has quad channel memory compatibility. There are 8 memory slots in all: 4 slots are black the other 4 slots are white. I currently have 4 memory modules of 1 GB each in the 4 white slots. That leaves me with 4 free memory slots. My question is: can I put 4 memory modules of 2 GB each in the 4 remaining slots or do I have to use modules of 1 GB all over? FYI here is the output of lshw: alpha description: Ordinateur Tour produit: Precision WorkStation 690 *-cpu:0 description: CPU produit: Intel(R) Xeon(R) CPU X5355 @ 2.66GHz *-memory description: Mémoire Système identifiant matériel: 1000 emplacement: Carte mère taille: 4GiB *-bank:0 description: FB-DIMM DDR2 FB-DIMM Synchrone 667 MHz (1,5 ns) produit: HYMP512F72CP8N3-Y5 fabriquant: Hynix Semiconductor (Hyundai Electronics) identifiant matériel: 0 numéro de série: 56737501 emplacement: DIMM 1 taille: 1GiB bits: 64 bits horloge: 667MHz (1.5ns) *-bank:1 description: FB-DIMM DDR2 FB-DIMM Synchrone 667 MHz (1,5 ns) produit: HYMP512F72CP8N3-Y5 fabriquant: Hynix Semiconductor (Hyundai Electronics) identifiant matériel: 1 numéro de série: 48115124 emplacement: DIMM 2 taille: 1GiB bits: 64 bits horloge: 667MHz (1.5ns) *-bank:2 description: FB-DIMM DDR2 FB-DIMM Synchrone 667 MHz (1,5 ns) produit: HYMP512F72CP8N3-Y5 fabriquant: Hynix Semiconductor (Hyundai Electronics) identifiant matériel: 2 numéro de série: 48115523 emplacement: DIMM 3 taille: 1GiB bits: 64 bits horloge: 667MHz (1.5ns) *-bank:3 description: FB-DIMM DDR2 FB-DIMM Synchrone 667 MHz (1,5 ns) produit: HYMP512F72CP8N3-Y5 fabriquant: Hynix Semiconductor (Hyundai Electronics) identifiant matériel: 3 numéro de série: 48115424 emplacement: DIMM 4 taille: 1GiB bits: 64 bits horloge: 667MHz (1.5ns) *-bank:4 description: FB-DIMM DDR2 FB-DIMM Synchrone 667 MHz (1,5 ns) [vide] fabriquant: FFFFFFFFFFFF identifiant matériel: 4 numéro de série: FFFFFFFF emplacement: DIMM 5 bits: 64 bits horloge: 667MHz (1.5ns) *-bank:5 description: FB-DIMM DDR2 FB-DIMM Synchrone 667 MHz (1,5 ns) [vide] fabriquant: FFFFFFFFFFFF identifiant matériel: 5 numéro de série: FFFFFFFF emplacement: DIMM 6 bits: 64 bits horloge: 667MHz (1.5ns) *-bank:6 description: FB-DIMM DDR2 FB-DIMM Synchrone 667 MHz (1,5 ns) [vide] fabriquant: FFFFFFFFFFFF identifiant matériel: 6 numéro de série: FFFFFFFF emplacement: DIMM 7 bits: 64 bits horloge: 667MHz (1.5ns) *-bank:7 description: FB-DIMM DDR2 FB-DIMM Synchrone 667 MHz (1,5 ns) [vide] fabriquant: FFFFFFFFFFFF identifiant matériel: 7 numéro de série: FFFFFFFF emplacement: DIMM 8 bits: 64 bits horloge: 667MHz (1.5ns) *-pci:0 description: Host bridge produit: 5000X Chipset Memory Controller Hub fabriquant: Intel Corporation identifiant matériel: 100 information bus: pci@0000:00:00.0 version: 12 bits: 32 bits horloge: 33MHz

  Read the article

• Azure's Ubuntu 12.0.4 fails to install PHP5

  - by Alex Kennberg

  Similar to this article from Azure themselves: http://www.windowsazure.com/en-us/manage/linux/common-tasks/install-lamp-stack/ I am trying to install PHP5 on Ubuntu 12.0.4 virtual machine. However, it fails installing the ssl-cert. $ sudo apt-get install php5 Reading package lists... Done Building dependency tree Reading state information... Done php5 is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 49 not upgraded. 1 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? y Setting up ssl-cert (1.0.28) ... Could not create certificate. Openssl output was: Generating a 2048 bit RSA private key ............................+++ ...................................................................................................................+++ writing new private key to '/etc/ssl/private/ssl-cert-snakeoil.key' ----- problems making Certificate Request 140320238503584:error:0D07A097:asn1 encoding routines:ASN1_mbstring_ncopy:string too long:a_mbstr.c:154:maxsize=64 dpkg: error processing ssl-cert (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: ssl-cert E: Sub-process /usr/bin/dpkg returned an error code (1) Any tips appreciated.

  Read the article

• Process does ICMP port scan on my OSX box and I am afraid my Mac got a virus

  - by Jamgold

  I noticed that my 10.6.6 box has some process sending out ICMP messages to "random" hosts, which concerns me a lot. when doing a tcpdump icmp I see a lot of the following 15:41:14.738328 IP macpro > bzq-109-66-184-49.red.bezeqint.net: ICMP macpro udp port websm unreachable, length 36 15:41:15.110381 IP macpro > 99-110-211-191.lightspeed.sntcca.sbcglobal.net: ICMP macpro udp port 54045 unreachable, length 36 15:41:23.458831 IP macpro > 188.122.242.115: ICMP macpro udp port websm unreachable, length 36 15:41:23.638731 IP macpro > 61.85-200-21.bkkb.no: ICMP macpro udp port websm unreachable, length 36 15:41:27.329981 IP macpro > c-98-234-88-192.hsd1.ca.comcast.net: ICMP macpro udp port 54045 unreachable, length 36 15:41:29.349586 IP macpro > c-98-234-88-192.hsd1.ca.comcast.net: ICMP macpro udp port 54045 unreachable, length 36 I got suspicious when my router notified me about a lot of ICMP messages that don't get a response [INFO] Mon Jan 10 16:31:47 2011 Blocked outgoing ICMP packet (ICMP type 3) from 192.168.1.189 to 212.25.57.90 Does anyone know how to trace which process (or worse kernel module) might be responsible for this? I rebooted and logged in with a virgin user account and tcpdump showed the same results. Any dtrace magic welcome.

  Read the article

• Immediately tell which output was sent to stderr

  - by Clinton Blackmore

  When automating a task, it is sensible to test it first manually. It would be helpful, though, if any data going to stderr was immediately recognizeable as such, and distinguishable from the data going to stdout, and to have all the output together so it is obvious what the sequence of events is. One last touch that would be nice is if, at program exit, it printed its return code. All of these things would aid in automating. Yes, I can echo the return code when a program finishes, and yes, I can redirect stdout and stderr; what I'd really like it some shell, script, or easy-to-use redirector that shows stdout in black, shows stderr interleaved with it in red, and prints the exit code at the end. Is there such a beast? [If it matters, I'm using Bash 3.2 on Mac OS X]. Update: Sorry it has been months since I've looked at this. I've come up with a simple test script: #!/usr/bin/env python import sys print "this is stdout" print >> sys.stderr, "this is stderr" print "this is stdout again" In my testing (and probably due to the way things are buffered), rse and hilite display everything from stdout and then everything from stderr. The fifo method gets the order right but appears to colourize everything following the stderr line. ind complained about my stdin and stderr lines, and then put the output from stderr last. Most of these solutions are workable, as it is not atypical for only the last output to go to stderr, but still, it'd be nice to have something that worked slightly better.

  Read the article

• Which Linux distributions work on IBM's JS20 PowerPC blade?

  - by Matthew Rankin

  Which Linux distributions have people successfully gotten working on an IBM JS20 Blade, which has the PowerPC 970 processor? Specifically, I'm interested in distributions other than RHEL and SLES. What gotchas need to be watched out for when installing a particular distribution of Linux on the JS20? Non-Specific Distribution Information IBM's Linux on BladeCenter JS20 IBM's eServer BladeCenter JS20 Whitepaper — "The JS20 blade supports all popular Linux distributions including Red Hat®, Inc., and SUSE LINUX." PenguinPPC Distributions List PPCLinux — "This project is a repository of information on how to run GNU/Linux on PowerPC architectures." Ubuntu Specific Information Ubuntu PowerPC FAQ — "Ubuntu 6.10 was the last officially supported PowerPC version of Ubuntu." Ubuntu PowerPC Download Ubuntu 8.04 PowerPC Supported Hardware Ubuntu 9.10 Ports — Mac (PowerPC) and IBM-PPC (POWER5) server install CD. For Apple Macintosh G3, G4, and G5 computers, including iBooks and PowerBooks as well as IBM OpenPower machines. Debian Specific Information Debian on PowerPC —"We may have a 64bit port in the future." Looks like there is only a 32-bit version available currently. Debian on JS20 blades Installing Debian Etch on IBM JS20s Gentoo Specific Information Gentoo Linux Crux PPC Specific Information Crux PPC

  Read the article

• No headphone or speakers plugged in - Windows 7 issue

  - by Amit Ranjan

  I am facing a wierd issue between my sound card driver and Windows7(any edition). I have a sony vaio notebook (VPCEB24EN). Two days ago, on start I got diabled wifi, charging and speakers. Then I restart the PC and everthing worked fine. Later on I again restarted my machine, and then I found the my speakers were not working. I thought, restart will work. I restarted many more times but it did'nt work. I searched google and found that , it might be due to : 1. Hardware is not switched on from bios. 2. No hardware. 3. overriding 64-bit drivers with 32-bit drivers. To make it working, I restored my laptop from scratched, but while restoring pc, the realtek HD drivers, it gave me an error 505. I then formatted the drive and installed Win7 Ultimate 32bit (With PC was, Win7 64-bit Home Basic). I got lots of yellow exclamation in device manager, thinking now this will resolve my issue. But Even after the installing all drivers on a fresh installation, I was still with the same position. A red cross on speaker- No Speakers or Headphone plugged in. Please Note: My Laptop is Vaio , E Series, VPCEB24EN. Audio : Intel® High Definition Audio compatible but accepts Realted Audio. While using BIOS Agent, I got Intel Chipset 5 Series Audio Adapter and ATI RV370 Audio adapter found on my board. Installed is Win7 32bit Ultimate. factory default was Win7 64-bit Home Basic Memory: RAM 3GB/ 320GB HDD Display : ATI Mobility Radeon™ HD 5145 Graphics

  Read the article

• Lost Permission on Files using wrong chmod syntax Centos 5.5

  - by alloutfallout

  Hello, I was trying to remove write permissions on an entire directory, and I used the incorrect command: chmod 644 -r sites/default I meant to type chmod -R 644 sites/default The result was this: chmod: cannot access `644': No such file or directory $ ls -als sites total 24 4 drwxr-xr-x 5 user group 4096 Jan 11 10:54 . 4 drwxrwxr-x 14 user group 4096 Jan 11 10:11 .. 4 drwxr-xr-x 4 user group 4096 Jan 5 01:25 all 4 d-w------- 3 user group 4096 Jan 11 10:43 default 4 -rw-r--r-- 1 user group 1849 Apr 15 2010 example.sites.php I fixed the permissions on the default folder with $ chmod 644 sites/default But, the following ls shows a all the files with red backgrounds and question marks. I can't access any files unless I am root. $ ls -als sites/default total 0 ? ?--------- ? ? ? ? ? . ? ?--------- ? ? ? ? ? .. ? ?--------- ? ? ? ? ? default.settings.php ? ?--------- ? ? ? ? ? files ? ?--------- ? ? ? ? ? settings.php When I log in as root, I can edit all of the files, and their permissions appear correctly. I do not know how to undo the damage caused by using -r with chmod instead of -R. Any Suggestions?

  Read the article

• Hardware doesn't work some times

  - by Ali

  I have an Asus n51vf laptop. I bought it not long time ago (less than a month) and installed Windows 7 on it. Since that it wasn't new when I bought it, I don't know, if the problem was occuring before re-installing Windows 7. There are two problems, that might (or might not) have something to do with each other: Problem The less annoying problem is that the screen flickers ONLY on YouTube when scrolling and/or pausing/playing the video or moving the curser over the video. The second more timeconsuming problem is that some of the hardware doesn't work when I turn up the computer. Then I have to reboot the computer and try again. Example: I turn on the computer, and the touchpad doesn't work - I then reboot and it works again. This has so far happened to the screen (leading to a black screen), the keyboard and the touchpad. More frequently the mouse. What have I tried to do so far? I tried reeinstalling the touchpad driver (Synaptic Touchpad driver from Asus Support Page) - didn't help at all. I even tried reinstalling the driver when the non-responding mouse on startup-problem occured (using the keyboard), but it asked me to reboot and didn't help at all. I also installed (and reinstalled) the graphics driver; it's a GeForce GT 130M. Now, the problem never occurs spontaneously - it only appears when booting my computer. I can even use the computer for heavy tasks (games, multiple programs running etc.) with no problem at all. I suspect, that the problem is in some booting mechanism that fails: Maybe the Windows driver loading? Motherboard problems?

  Read the article

• Fedora 12 on Vmware network disabled on restore

  - by Chaitanya

  I have a fedora 12 guest running on VMWare on windows 7. I use it mainly for the occasional linux dev. Whenever I restart the guest, networking works fine. But if I close the VMware player and save state, the next time I start the image, networking is disabled (red x on the network icon. message saying networking disabled). I can't seem to find a way to restore networking. I have to reboot the guest to get my network access back again. My Ubuntu image doesn't have this problem. I can close the player and when I re run the image, I can pick up where I left off, with all the open firefox windows and application windows as I left them. Fedora saves state, but doesn't seem to enable networking. There is a relevant warning I have seen "SELinux is preventing /sbin/ifconfig "read" access to/var/run/vmware-active-nics." But I am not sure how to solve it. I know fedora isn't officially supported by VMware, but it seems to be working fine for the most part and meeting my needs, except for this one little issue. Any help would be much appreciated.

  Read the article

• Do you known a reputable backup software that can capture ONLY file system structure + attributes, WITHOUT file content

  - by bogdan

  Is there, on Windows, a reputable backup software out there capable of capturing ONLY a file system's directory and file structure, along with each item's attributes, WITHOUT capturing the actual file content (all files should be zero-length in the backup). I thoroughly searched the web for a solution and wasn't able to find one. Scenario when this would be very useful: I have a large drive with a huge amount of files. If the drive dies, I don't care so much about the content in these files (I can always download this content again from the Internet at any time) but I do care HUGELY about the names of the files that were on it, possibly also about their MD5 hashes and other classic file attributes (especially created-date / modified-date). The functionality I need is present to an extent in "media"/file cataloging software (i.e. whereisit) and, to a lesser extent, in a Total Commander set of extensions (DiskDir, DiskDirExtended). The huge drawback with cataloging software is that it's not designed to store previous versions of each item (AFAIK) and, most importantly, it has very weak content backup capabilities. I managed to think of a hack but I hope there's some backup software out there that already has this capability and I just failed to find it, thus this question. The hack: RoboCopy could be used with /CREATE (CREATE directory tree and zero-length files only) or /COPY (what to COPY for files) without the D=Data flag, to clone a directory structure into one where all files are zero-length but have the desired attributes. Then I would backup the cloned directory structure with a reputable backup software. I would really love to avoid a hack like this one, if possible. Thanks, Bogdan

  Read the article

• Optical Audio out stuck on on a MacBook

  - by Clinton Blackmore

  Apple have made an interesting headphone port for the MacBook (and some other Intel Mac models). It works like a standard jack: nothing plugged in - audio comes out of built-in speakers headphones/external speakers plugged in - plays through headphones/external speakers but you can also use a special adapter (which trips a tiny microswitch) to get an optical audio out signal (which you can presumably plug into a nice surround-sound system). This is all well and good except when, like auto-tracking, it doesn't work, and you are left with nothing to adjust. Users report that they get no sound when they have nothing plugged in and that a red light emanates from the headphone port. If you go to System Preferences - Sound - Output, it will say (IIRC) "Optical Out" instead of "Internal Speakers". The only solution I'm aware of is to try to reset the switch by inserting and removing a set of headphones or a toothpick, perhaps wiggling it inside of the port, and hoping that you luck out and get it. Are there other ways to fix this problem? Does anyone know where the microswitch is or have a good technique to reset it?

  Read the article

• Scanning website for vulnerablities

  - by Kristen

  I have found that the local school's website installed a Perl Calendar - this was years ago, it has not been used for ages, but Google has it indexed (which is how I found it) and it full of Viagra links and the like ... program was by Matt Kruse, here is details of the exploit: http://www.securiteam.com/exploits/5IP040A1QI.html I've got the school to remove that, but I think they also have MySQL installed and I'm aware that out-of-the-box there have been some exploits of Admin Tools / Login in old versions. For all I know they also have PHPBB and the like installed ... The school is just using some cheap, shared hosting; the HTTP response header I get is: Apache/1.3.29 (Unix) (Red-Hat/Linux) Chili!Soft-ASP/3.6.2 mod_ssl/2.8.14 OpenSSL/0.9.6b PHP/4.4.9 FrontPage/5.0.2.2510 I'm looking for some means of checking if they have other junk installed (quite possibly from way back, and now unused) that might put the site at risk. I'm more interested in something that can scan for things like the MySQL Admin exploit rather than open ports etc. My guess is that they have little control over the hosting space that they have - but I'm a Windows DEV, so this *nix stuff is all Greek to me. I found http://www.beyondsecurity.com/ which looks like it might do what I want (within their evaluation :) ) but I have a worry about how to find out if they are well known / honest - otherwise I will be tipping them a wink with a Domain Name that may be at risk! Many thanks.

  Read the article

< Previous Page | 371 372 373 374 375 376 377 378 379 380 381 382  | Next Page >