Search Results

Search found 12582 results on 504 pages for 'remove'.

Page 375/504 | < Previous Page | 371 372 373 374 375 376 377 378 379 380 381 382  | Next Page >

• Using URL rewrite module for http to https redirect

  - by johnnyb10

  Following ruslany's suggestion on the URL Rewrite Tips page here, I'm trying to use URL Rewrite to redirect http:// requests for my site to https://. I've written and tested the rule using a test site I set up, and so now the final piece is to create a second site (http) to redirect to my https site. (I need to use a second site because I don't want to uncheck the "Require SSL encryption" checkbox on my existing site.) I'm an IIS newbie so my question is: how do I do this? Should I create a site with the same name and host header, only it will be bound to http? Will IIS let me create a site with the same name? I don't want to screw anything up with my existing site (which is a SharePoint site, currently used by external users). That site currently has http and https bound to it. So my assumption is that, using ISS (not SharePoint), I will create a new site (http only) with the same name and host header as my existing site, and add the URL Rewrite rule to the http site. And then I guess I should remove the http binding from my existing site? Does that seem correct? Any advice, gotchas, etc., would be appreciated. Thanks.

  Read the article

• NTFS 'Owner' missing when accessing hard disk from external USB adapter

  - by trismarck

  I have a hard drive with Windows XP SP3 installed on it. When the drive is connected through the standard SATA connector inside the laptop, everything works as expected. However when I remove the drive from the laptop and connect the drive to the external USB adapter, almost all files / folders lose the 'Owner' field contents. I was wondering why could that be. I've tried two USB adapters and this happens on each. I could take the ownership of all of the files, but this would overwrite the Owner value (the Owner value that is present when the drive is accessed through standard SATA connector in the laptop). //edit: if the hard drive is used through the USB adapter, I can't access most of the files, at least until I take ownership of the files (/folders). This is how it looks like: HDD inside USB adapter: HDD inside laptop: (note the Owner column) //edit: some of the files on the first screenshot have Owner field filled up. That's because I took the ownership of those files / folders to be able to access the files on the hard drive. //edit2: also, if the hard drive is connected through USB adapter and if I've took the ownership of some files by the 'ddd' user, then if i login as a different user (lets say 'eee' user), the owner field is _still_ empty: ddd user: eee user: eee user can't access the 'ddd' folder. Both users have Administrator priviledges.

  Read the article

• nginx not starting at reboot after gitlab installation

  - by Luis Masuelli

  I installed nginx (1.6) in ubuntu server (14.04). After that, I installed gitlab. I didn't realize it came with its own nginx. I uninstalled gitlab later. After installing gitlab, my first nginx began to never start at boot as a service. This means: If I hit sudo netstat -anp I don't see the corresponding entry in 0.0.0.0:80. If I hit sudo nginx -s reload and then sudo netstat -anp I see the corresponding entry I mentioned. I thought I could fixing it by doing: sudo update-rc.d nginx remove sudo update-rc.d nginx defaults After removing gitlab, but it did not help me (i.e. after reboot, nginx does not automatically start). I revised the /etc/init.d/nginx just to see that $DAEMON is still /usr/sbin/nginx. Question: What should I check to see the problem here (or: what could the problem be)? sudo nginx -s reload works with no problems at all.

  Read the article

• emacs ORG-mode "headless" export-as commands?

  - by Seamus

  When I use org-export-as-latex or org-export-as-html orgmode turns my buffer into a .tex file or .html file. But I don't want all the extra junk that it adds to the file: I want to handle the documentclass and everything myself and just \input the org mode generated file. (Or the analogous things for html with php). So if my org file just has: * Section - Stuff - Things I want the org mode command to output just \section{Section} \begin{itemize} \item Stuff \item Things \end{itemize} Without any of the extra \tableofcontents junk that ORG adds to it. I know I could define my own kind of #+LaTeX_CLASS that could add the packages I want and so on, but I don't want to do things that way (and that wouldn't remove the \maketitle or the spurious \vspace* that ORG insists on inserting. Is there a command to do this "headless" parsing and converting? I had a look but it's not obvious from the documentation. Presumably some low level ORG command is doing the parsing and converting I want, but I couldn't find what it was called from looking at the docs and C-h pages... This is not a question about HTML or LaTeX but about emacs ORG mode. So don't kick it off to some other site...

  Read the article

• Best usage for a laptop being used as a desktop without removable batteries

  - by Senseful

  After reading the information on http://batteryuniversity.com, I realize that one of the best ways to permanently damage a lithium ion battery is to use the battery at a high temperature while it's fully charged. This is exactly what happens when you use the computer as if it were a desktop computer, since leaving it plugged in will keep the battery at 100% and using the computer will heat up the battery. This is why it's recommend to remove the battery from your laptop if you are using it is this scenario. My question is what would you do if the laptop doesn't have removable batteries (e.g. a MacBook Pro)? Should I use some kind of charge cycle such as: charge to 80%, unplug the power chord, use the laptop until it reaches 20%, then repeat the cycle by charging to 80% again? If so, which values should I use instead of 80% and 20%? (I think charging to 80% is better than 100% because of the damage that a hot battery at 100% can do, but I just made the figure 80% up, and I'm sure there's a better number to strive for which is backed by science.) I've read many of the articles on batteryuniversity.com, but couldn't find anything pertaining to this. Update: What about doing something like charge (or discharge) it to 50%, then plug it in and turn on settings which use the battery as much as possible (e.g. brightness all the way up, wi-fi on, etc.), in order to try to maintain the battery at 50% (i.e. the rate it is charging is the same as it is discharging). This will probably heat up the battery, but would make it so you don't need to constantly plug and unplug the laptop. The one bad thing is that you are taking up more charge cycles which would decrease the battery life, thus I'm not sure this is a good idea.

  Read the article

• BIOS not detecting working SATA hard drive.

  - by Evan

  Some time ago my power supply died. It's a long story from then till now, but the important bit is that I ended up with a new hard drive and a new power supply. I tested to see if my original hard drive was still alive, and it booted and worked perfectly until I turned it off. When I started it again it would not boot. I bought new SATA cables, assuming that the one I had was not seating properly (it was cheap and wobbly), but no dice. Upon start-up I am presented with a message telling me to insert boot media into the selected drive or add a drive and restart. Neither the new or the old drive is detected by BIOS, my Vista install disk, or from my bootable Linux USB drive. When I remove all of the RAM the computer ceases outputting visual information, and upon reinstalling the ram and starting up again gives me a "failed overclock" error. So, does anyone have an idea as to what might be going on? I'm completely lost at this point.

  Read the article

• tmpreaper, --protect and a non-root user

  - by nsg

  Hi, I'm a little confused. I have a download directory that I want to remove all files older then 30 days with tmpreaper. Just one problem, the directory in question is a separate partition with a lost+found directory, of course I need to keep it so I added --protect 'lost+found', the problem is that tmpreaper outputs: error: chdir() to directory 'lost+found' (inode 11) failed: Permission denied (PID 30604) Back from recursing down `lost+found'. Entry matching `--protect' pattern skipped. `lost+found' I have tried with other pattern like lost* and so on... I'm running tmpreaper as a non-root user because there is no reason for superuser privileges because I own all files (except lost+found). Are I'm forced to run tmpreaper as root? Or are my shell-skills not as good as I thought? I guess the problem is: tmpreaper will chdir(2) into each of the directories you've specified for cleanup, and check for files matching the <shell_pattern> there. It then builds a list of them, and uses that to protect them from removal. Any thought and/or advice? Edit: The command I'm trying to run is something like $ /usr/sbin/tmpreaper -t --protect 'lost+found' 30d /mydir 1> /dev/null error: chdir() to directory `lost+found' (inode 11) failed: Permission denied Edit 2: I read the source code for tmpreaper-1.6.13 and found this if (safe_chdir (dirname)) exit(1); and if (chdir (dirname)) { message (LOG_ERROR, "chdir() to directory `%s' (inode %lu) failed: %s\n", dirname, (u_long) sb1.st_ino, strerror (errno)); return 1; } So it seems tmpreaper needs to be able to chdir in to all directories, ignored or not. I see two options left Run tmpreaper as root Move the download directory Find a alternative tool (tmpwatch?) I will give it some more research before i make a choice.

  Read the article

• Win7 - Opening "Programs and Features" as Admin from command line (logged in as regular user)

  - by user1741264

  We have Win7 machines on a domain that we'd like to open the "Programs and Features" control applet via the command line while a regular user is logged in. Heres the catch: I know how to do this using runas from command line BUT after "Programs and Features" opens, I dont truly have the ability to remove a program. I am told that I need to be an Admin to do so. Here are the commands I have tried: runas /user:%computername%\administrator cmd.exe then in the new cmd window running: control appwiz.cpl runas /user:%companydomain%\%domainadminacct% cmd.exe then in the new cmd window running: control appwiz.cpl runas /user:%computername%\administrator cmd.exe then in the new cmd window running: rundll32.exe shell32.dll,Control_RunDLL appwiz.cpl runas /user:%companydomain%\%domainadminacct% cmd.exe then in the new cmd window running: rundll32.exe shell32.dll,Control_RunDLL appwiz.cpl I have also tried all of the above as one long line of code instead of launching a cmd.exe as Admin As you can see, I have tried running the command using both a local admin account (Administrator) AND a domain admin account. I have alos tried launching the runas command as one long command (opening the "programs and features") AND 1st launching a cmd.exe with admin rights and THEN launching the "Prgrams and Features" window. The result is the same: The "Programs and Features" windows opens but when I try to perform an uninstall, I am told I need Admin rights. Thus I am lead to believe that this instance of "Programs and Features" is not truly being run as an admin I am trying to avoid logging the regular user out. I am also aware that every program has its own uninstaller, I do not want to uninstall that way. I want to use the uninstaller in "Programs and Features". Any help is appreciated.

  Read the article

• dig show only answer

  - by Zulakis

  I want dig only to show the answer of my query. Normally, it prints out alot of additional info like this: ;; <<>> DiG 9.7.3 <<>> google.de ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 55839 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;google.de. IN A ;; ANSWER SECTION: google.de. 208 IN A 173.194.69.94 ;; Query time: 0 msec ;; SERVER: 213.133.99.99#53(213.133.99.99) ;; WHEN: Sun Sep 23 10:02:34 2012 ;; MSG SIZE rcvd: 43 I want this to be reduced to just the answer section. dig has alot of options, a good one i found was +noall +answer ; <<>> DiG 9.7.3 <<>> google.de +noall +answer ;; global options: +cmd google.de. 145 IN A 173.194.69.94 It leaves out most of the stuff, but still shows this options thing. Any ideas on how to remove it using dig options? I sure could cut it out using other tools, but a option with dig itself would be the cleanest and nicest.

  Read the article

• Self-connecting printers

  - by Martin Cerny

  Hello, I work as an administrator in a small company using XP Professional on all computers and two servers with Win 2003 Server. Recently a very unusual problam occured one of the computers keeps connecting to all the printers on the network it doesn't matter if it's an administrator or Domain User as soon as somebody logs in the commputer connects all the printers. The printers are either installed on local computers or on the server and shared. There is no log-on script connecting the printers, I install them manualy and none of the other computers shows such behaviour. We have a printer which is installed on two computers and both of them share it (I'm moving it to Server from a small PC which shared it up to now, but some computers still use the old connection), meaning this specific computer connects to one of the printer two times and it can't use either of the connections. How to prevent this self-connecting to all printers (none of the other computers has this problem). If I delte them from the "Printers" folder everything works fine untill I reconnect and the Folder is once again full of all the printers we have. I solved the smaller problem, computer is now capable of printing on all of the printers (it seems there have been some registry issues), after cleaning the registry and reinstalling the printer it seems to work just fine. But the second thing prevails, the computer connects to all the printers in the network (when I remove one/multiple it is reconnected right after the next log-in by any user).

  Read the article

• Exchange 2010 OWA- Open Other User Mailbox

  - by Benjamin Jones

  I just started working for this small firm (30 people) a little bit ago, replacing their System Admin. First thing I noticed was Exchange Server 2010 was WAY out of date. Believe it or not they did not have SP1 installed. So after I installed and configured Exchange 2010 SP3 and redirected OWA I noticed something in OWA. I could add ANYONE's User Mailbox WITHOUT giving mailbox premission. I created a couple test users, same thing. I even had another employee provide me access to their OWA and they could open anyone's Inbox without granting permission. I don't want to play the blame game, but I was SHOCKED that this was going on. Luckly being such a small company I'll be able to cover this mistake that I did not create, BUT HOW? My guess is that I need to find out where the past System Admin went wrong in providing Full Access Permission? Or could this be a Auto-Mapping issue? I found this article: http://technet.microsoft.com/en-us/library/hh529943.aspx This might work $FixAutoMapping = Get-MailboxPermission sharedmailbox |where {$_.AccessRights -eq "FullAccess" -and $_.IsInherited -eq $false} $FixAutoMapping | Remove-MailboxPermission $FixAutoMapping | ForEach {Add-MailboxPermission -Identity $_.Identity -User $_.User -AccessRights:FullAccess -AutoMapping $false} However how do I insert the above code into Powershell? Again I was thrown into this mess and I'm just trying to iron out this tangled mess.

  Read the article

• Configure Nginx to render static files and rewrite file extension or proxy_pass

  - by Pardoner

  I've set up Nginx to handle all my static files else proxy_pass to a Node.js server. It's working fine but I'm having difficulty rewriting the url so that it remove the .html file extension. upstream my_upstream { server 127.0.0.1:8000; keepalive 64; } server { listen 80; server_name staging.mysite.com; root /var/www/staging.mysite.org/public; access_log /var/logs/staging.mysite.org.access.log; error_log /var/logs/staging.mysite.org.error.log; location ~ ^/(images/|javascript/|css/|robots.txt|humans.txt|favicon.ico) { rewrite (.*)\.html $1 permanent; try_files $uri.html $uri/ /index.html; access_log off; expires max; } location / { proxy_redirect off; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header X-Forwarded-Proto $scheme; proxy_set_header Host $http_host; proxy_set_header X-NginX-Proxy true; proxy_set_header Connection ""; proxy_http_version 1.1; proxy_cache one; proxy_cache_key sfs$request_uri$scheme; proxy_pass http://my_upstream; } }

  Read the article

• Can varnish cache files without specific extension or residing in specific directory

  - by pataroulis

  I have a varnish installation to cache (MANY) images that my service serves. It is about 200 images of around 4k per second and varnish happily serves them according to the following rule: if (req.request == "GET" && req.url ~ "\.(css|gif|jpg|jpeg|bmp|png|ico|img|tga|wmf)$") { remove req.http.cookie; return(lookup); } Now, the thing is that I recently added another service on the same server that creates thumbnails to serve but it does not add a specific extension. The files are of the following filename pattern: http://www.example.com/thumbnails/date-of-thumbnail/xxxxxxxxx.xx where xx are numbers, so xxxxxxxxx.xx could be 6482364283.73 (two numbers at the end) (actually this is the timestamp so I can keep extra info in the filename) That has the side effect that varnish does not cache them and I see them constantly being served by apache itself. Even though I can change the format from now on to create thumbs ending in .jpg, is there a way to change the vcl file of my varnish daemon to either cache everything under a directory (the thumbnails directory) or everything with two numbers at its extension? Let me know if I can provide any additional info ! Thanks!

  Read the article

• Did my registrar screw up or is this how name server propagation works?

  - by Brad

  So my company has a number of domains with a large registrar that shall go unnamed. We are making some changes to our DNS infrastructure and the first of those is we are moving our secondary DNS from one server on site to four servers offsite. So we updated the name servers for each domain at the registrar by removing the entry for the old secondary name server and adding the four new ones. I monitored the old secondary server for requests and when I saw no new requests had been made for 24 hours I shut it down. That was this morning. I assumed at this point everything was good. Unfortunately this was my mistake. I should have gone and made sure name servers at large were returning the correct NS records. So this afternoon we were performing maintenance on our primary DNS server and we shut it down. This is when I started getting alerts from our external monitoring. I checked and sure enough, the DNS server used there reported the only NS record for our primary domain was the primary name server. The new secondary servers were not listed and neither was the old secondary. Is it unreasonable of me to have assumed that because the update was from ns1.mydomain.com ns2.mydomain.com to ns1.mydomain.com ns1.backupdns.com ns2.backupdns.com ns3.backupdns.com ns4.backupdns.com in one step at the registrar that there should be no intermediate state where the only NS record was for ns1.mydomain.com? Going forward to be safe obviously I will always leave the old name servers alone until after I'm 100% sure the new ones have propagated and only then remove the old name servers from the registrar. However, I'd still like to know if my registrar screwed up or if my expectation was unreasonable.

  Read the article

• How should a small company administer their web server?

  - by John Isaacks

  We currently have our website hosted by a small company that is actually a reseller for Rackspace. They act as our server administrators. They configured the servers, handle the backups, if there is a problem, we call them and they fix it. We are growing and want to move away from our shared server to either a cloud or dedicated server. I am thinking cloud myself but I am open to either. The current company doesn't seem to want to offer us anything more than a shared hosting plan. I looked into cloud solutions at vps.net, with them I would have to be the server administrator myself. I am the website programmer but administering the server is outside my comfort zone. vps.net does have a $99/month plan for Pro-Active Managed Support but I am not sure if this is the equivalent on a server admin that is there when you need them. We could hire someone in house, but I think that would be overkill for our needs. I am not exactly sure what we need, I do know we need as close to 100% uptime as we possible can. and we need the ability to add/remove/change the server configuration/software/etc. when needed (though changes shouldn't be very often once everything is setup right). Can someone point me in the right direction? What do other companies do?

  Read the article

• How to allow users to transfer files to other users on linux

  - by Jon Bringhurst

  We have an environment of a few thousand users running applications on about 40 clusters ranging in size from 20 compute nodes to 98,000 compute nodes. Users on these systems generate massive files (sometimes 1PB) controlled by traditional unix permissions (ACLs usually aren't available or practical due to the specialized nature of the filesystem). We currently have a program called "give", which is a suid-root program that allows a user to "give" a file to another user when group permissions are insufficient. So, a user would type something like the following to give a file to another user: > give username-to-give-to filename-to-give ... The receiving user can then use a command called "take" (part of the give program) to receive the file: > take filename-to-receive The permissions of the file are then effectively transferred over to the receiving user. This program has been around for years and we'd like to revisit things from a security and functional point of view. Our current plan of action is to remove the bit rot in our current implementation of "give" and package it up as an open source app before we redeploy it into production. Does anyone have another method they use to transfer extremely large files between users when only traditional unix permissions are available?

  Read the article

• How to create a new background process in a KSH "while read" loop?

  - by yael

  The following test script has a problem. When I add the line (sleep 5 ) & in the script then the "while read" loop does not read all lines from the file, but only prints the first line. But when I remove the ( sleep 5 ) & from the script, then the script prints all lines as defined in the file. Why the ( sleep 5 ) & causes this? And how to solve the problem? I want to create a new process (for which the sleep is just an example) in the while loop: $ more test #!/bin/ksh while read -r line ; do echo Read a line: echo $line ( sleep 5 )& RESULT=$! echo Started background sleep with process id $RESULT sleep 1 echo Slept for a second kill $RESULT echo Killed background sleep with process id $RESULT done < file echo Completed On my Linux, when using the following contents of file: $ more file 123 aaa 234 bbb 556 ccc ...running ./test just gives me: Read a line: 123 aaa Started background sleep with process id 4181 Slept for a second Killed background sleep with process id 4181 Completed

  Read the article

• Virus on site but can't find where

  - by Rob

  WARNING! THIS IS ABOUT A VIRUS ON MY SITE. IT APPEARS IT HAS BEEN THERE FOR SOMETIME AND I'VE HAD NO PROBLEMS. BUT PLEASE BE CAREFUL. READ EVERYTHING I SAY AND SEE IF YOU CAN HELP ME WITHOUT VISITING THE LINK. AVG PICKS UP ON IT AND BLOCKS IT, MCAFEE DOES NOT. Sorry about the warning, obviously i'm not here to get anyone infected or anything like that. Basically I run the website sortitoutsi dot net. Ages ago I got a virus on my computer, they got hold of my FTP passwords and added some lines of javascript to the top of my site. I removed them and believe it was fixed. However i'm using the "Web Developer" extension for Firefox and chose to view all javascript on my page and find there are various links to horrible urls such as: gittigidiyor-com.excite.co.jp.webmasterworld-com.eastmusicdirect.ru:8080/aboutus.org/aboutus.org/google.com/skycn.com/torrents.ru.php and gittigidiyor-com.excite.co.jp.webmasterworld-com.eastmusicdirect.ru:8080/index.php?jl= These terms do not appear anywhere. In the source code, in any of the javascript or the css. I also can't see that there are any rogue images that I don't recognise either. So i've no idea where this javascript is coming from. Can anyone suggest how I can find references to these links and remove them? I can see them both in the Web Developer firefox extension and in the net tab using Firebug. Any help would be greatly appreciated

  Read the article

• How to completely disable IPv6 for loopback interface on RHEL 5.6

  - by Marc D

  I've done lots of research on how to disable IPv6 on RedHat Linux and I have it almost completely disabled. However the loopback interface is still getting an inet6 loopback address (::1/128). I can't find where IPV6 is still enabled for loopback. To disable IPV6 I added the following settings to /etc/sysctl.conf: net.ipv6.conf.default.disable_ipv6=1 net.ipv6.conf.all.disable_ipv6=1 And also added the following line to /etc/sysconfig/network: NETWORKING_IPV6=no After rebooting, the inet6 address is gone from my physical interface (eth0), but is still there for lo: # ip addr show 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 00:50:56:xx:xx:xx brd ff:ff:ff:ff:ff:ff inet 10.x.x.x/21 brd 10.x.x.x scope global eth0 If I manually remove the IPV6 address from loopback and then bounce the interface, it comes back: # ip addr del ::1/128 dev lo # ip addr show lo 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo # ip link set lo down # ip link set lo up # ip addr show lo 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever I believe IPV6 should be disabled at the kernel level as confirmed by sysctl: # sysctl net.ipv6.conf.lo.disable_ipv6 net.ipv6.conf.lo.disable_ipv6 = 1 Any ideas on what else would cause the loopback interface to get an IPV6 address?

  Read the article

• How to sandbox a VMWare image as much as possible

  - by Craig H

  The situation: -A corporate environment, with a corporate managed XP desktop (locked down, patched regularly, restricted user rights, no manual install of SW, AV, etc.) The requirement: -Using VMWare Workstation, run a sandboxed image (also XP) for specific testing purposes (with admin rights in the guest VM). No network connectivity is required. It can't be a separate standalone physical workstation disconnected from the network. (FWIW, this is a legitimate, sanctioned requirement - not someone trying to get around corporate restrictions.) The challenge: -Do this in as safe/secure a manner as possible. The proposed solution: -Create an image with host-only networking. -Perhaps remove the virtual ethernet adapter? (not sure if it's required for basic VMWare functionality?) The question (finally): -What potential risks remain (and how could I best mitigate them)? One challenge is that the guest VM will not be a managed workstation itself, so patching, AV, etc. can't be guaranteed (and, ironically, would in fact be somewhat difficult given the proposed solution!)

  Read the article

• File Server Resource Manager attempting to access quota.xml on System Reserved partition?

  - by pmellett

  I've got a new install of Server 2008 R2 that is designed to be our quota server for user home directories and shared areas. I installed FSRM and set up a few quotas to try out. They worked fine but at some point over the weekend it's stopped loading the FSRM console quota screen and gives the following error, with Event ID 8228: File Server Resource Manager was unable to access the following file or volume: '\\?\Volume{73649de6-7f04-11e1-a344-005056b10310}\System Volume Information\SRM\quota.xml'. This file or volume might be locked by another application right now, or you might need to give Local System access to it. I have removed and reinstalled the FSRM Role Service, cleared the \System Volume Information\SRM folder on each volume and am at the verge of just starting again. I'd rather not since then I have to go through and set up all my NTFS permissions again. Since it looks like the service is trying to access the System Reserved partition, which I assume won't have any files it could possibly need, how do I remove System Reserved partition as a volume to be monitored for the quota service? (I am not aware of configuring that to be the case originally though!)

  Read the article

• Creating security permissions for a non-domain-member user in Windows Server 2008

  - by Overhed

  Hello everyone, I apologize in advance for incorrect use of terminology, as I'm not an IT person by trade. I'm doing some remote work via a VPN for a client and I need to add some DCOM Service security permissions for my remote user. Even though I'm on the VPN, the request for access to the DCOM service is using my PCs native user (and since I'm running Vista Home Premium it looks something like: PC-NAME\Username). The request for access comes back with access denied and I can not add this user to the security permissions as it "is not from a domain listed in the Select Location dialog box, and is therefore not valid". I'm pretty stuck and have no clue what kind of steps I need to do here. Any help would be appreciated, thanks in advance. EDIT: I have no control over what credentials are being passed in to the server by my computer. This scenario is occurring in an installation wizard that has a section which requests you point it to the machine running the "server" version of the software I'm installing (it then tries to invoke the relevant COM service, but my user does not have "Remove Activation Permissions" on that service, so I get request denied).

  Read the article

• VNC Address Book - Window Invisible? Working as intended?

  - by user1445967

  I have VNC Server and VNC Viewer on the same PC with Windows 7 Ultimate x64. Is VNC Address Book supposed to have a main application window? I can't tell if this is bugged or working as intended. When I start VNC Address book, it creates an item in the task list and also an icon in the notification area. If I click the task list item once, nothing happens. If I click again, it disappears from the task list but remains in the notification area**. If I right-click the icon on the notification area, there is an option 'open address book', which if chosen, creates the item in the task list again, with the exact same behavior. If I left or right click on the address book icon, I have ways to connect to servers in the address book. However I have no way to add/remove/edit servers in the address book. **Note that this behavior is identical to that of an application with a main window where there is an option to 'minimize to system tray / notification area'. Only here, no main window is visible, ever. If fixing this problem is beyond the scope of this site, that's fine, but at this point I have no real way to tell if the program is malfunctioning on my pc or if it is far more minimalist than I expected. There appears to be no forum on realvnc.com where I can ask about this, perhaps this is to prevent me from getting any help unless I pay to register?

  Read the article

• Routing / binding 128 IPs to one server

  - by Andrew

  I have a Ubuntu server with 128 ip's (static external ips 86.xx.xx.16), and I want to crawl pages thru different ip's. The gateway is xx.xxx.xxx.1, the main ip is xx.xxx.xxx.16, and the other 128 ip's are xx.xxx.xxx.129/255. I tried this configuration in /etc/network/interfaces but I doesn't work. It work if I remove the gateway for the aliases eth0:0 and eth0:1. I think this is routing problem. auto lo iface lo inet loopback auto eth0 auto eth0:0 auto eth0:1 iface eth0 inet static address xx.xxx.xxx.16 netmask 255.255.255.128 gateway xx.xxx.xxx.1 iface eth0:0 inet static address xx.xxx.xxx.129 netmask 255.255.255.128 gateway xx.xxx.xxx.1 iface eth0:1 inet static address xx.xxx.xxx.130 netmask 255.255.255.128 gateway xx.xxx.xxx.1 Also, please tell me how to "reset" every changes that I made in networking and routing. Update: I removed the gateway and now it works. I can reach the website thru all 128 ip's. But when I try to bind a socket connection in php to a specific ip I get no answer. socket_bind($sock, "xx.xxx.xx.xxx"); socket_connect($sock, 'google.com', 80); I tryed to use a sniffer to see the packets, and I see the packet sent from binded ip to google.com but the "connection" can't be established. I don't know anything about "route" command, but I have a feeling that this is the solution.

  Read the article

• Snapshotting single disk of running Hyper-V VM

  - by modelnine

  I'm currently somewhat at a loss of how to create a snapshot of a single virtual hard-disk of a running Hyper-V VM. Generally, creating a differential disk while a server is shut down is no problem (i.e., call the new-vhd cmdlet and pass a ParentPath, then update the VHD-binding of the respective VM-device), but while the host is running, all I can find is checkpointing the VM as a whole (which creates snapshots of all attached disks), and leaves the VM-state in a form which isn't easily processable by external tools (i.e., it requires reading additional meta-data from the VM). Generally, what'd I'd like to happen for a single-disk snapshot (in my understanding) is: Pause the VM Rename current disk to some other name which specifies it as a base-snapshot Create a new VHD which has the renamed VHD as parent path and is marked as "current" Swap the VHD for the VM for the snapshotted hard-disk to the newly created differential VHD Resume the VM Is there any means to do this programatically? Update: I've seen that this is actually possible with SCSI-disks, i.e. pause the VM, remove the SCSI disk, make the snapshot, reattach the SCSI disk at the same position, resume the VM. And, the VM resumes properly. But: is something similar also possible with G1 machines for the boot disk which is always IDE?

  Read the article

< Previous Page | 371 372 373 374 375 376 377 378 379 380 381 382  | Next Page >