Search Results

Search found 10161 results on 407 pages for 'dual boot'.

Page 376/407 | < Previous Page | 372 373 374 375 376 377 378 379 380 381 382 383  | Next Page >

  • Debootstrap Ubuntu over NFS leads to mknod I/O error

    - by Aaron B. Russell
    Hi everyone, I'm trying to prepare an Ubuntu environment for a diskless machine that will PXE boot and mount an NFS share as it's root. I've currently got another Ubuntu machine mounting the NFS share and I'm trying to debootstrap into it, but it has trouble creating devices over NFS: root@kimiko:~# mount | grep Seiuchi 192.168.0.203:/mnt/user/Seiuchi on /mnt type nfs (rw,addr=192.168.0.203) root@kimiko:~# debootstrap --arch i386 maverick /mnt http://gb.archive.ubuntu.com/ubuntu/ mknod: `/mnt/test-dev-null': Input/output error E: Cannot install into target '/mnt' mounted with noexec or nodev My NFS rule on the unRAID server is 192.168.0.201/32(rw,no_root_squash,sync). I don't have the noexec or nodev options set. I've not got much experience with NFS, so I'm probably missing something basic in the way I'm sharing this, but my attempts at Googling for an answer isn't really turning anything useful up. Does anyone have suggestions on what I might have missed or maybe relevant docs? Edit: Creating normal files (and directories) works just fine, I just can't create devices... root@kimiko:/mnt# mkdir foo root@kimiko:/mnt# cd foo root@kimiko:/mnt/foo# touch bar root@kimiko:/mnt/foo# mknod quux c 4 64 mknod: `quux': Input/output error root@kimiko:/mnt/foo# ls bar

    Read the article

  • Workstations cannot see new MS Server 2008 domain, but can access DHCP. (solved)

    - by Radix
    The XP Pro workstations do not see the new replacement domain upon boot; they only see their cached entry for the old (server 2003) domain controller. The old_server is not connected to the network. I have DHCP working with the same scope as the old_server. In my "before-asking" search for a solution I came across the following two articles, and I recall doing things as suggested by the articles. http://www.windowsreference.com/windows-server-2008/how-to-setup-dhcp-server-in-windows-server-2008-step-by-step-guide/ http://www.windowsreference.com/windows-server-2008/step-by-step-guide-for-windows-server-2008-domain-controller-and-dns-server-setup/ The only possible issue is: I was under the impression that the domain netbios needed to match the DC's netbios. The DC netbios is city01 while the domain's FQDN is city.domain.org (I think this is mistaken and should have been just domain.org) But, the second link led me to a post which I believe answers my question. I did as they instructed by opening Local Area Connection Properties, then selecting TCP/IPv4 and setting the sole preferred DNS server to the local hosts static IP (10.10.1.1). Search for "Your problems should clear up" for the post I'm referencing: http://forums.techarena.in/active-directory/1032797.htm Have I misunderstood their instructions? I am hoping to reach the point where I can define users and user groups. Also, does TechNet have a single theoretical overview document I could read. I really don't like treating comps as magic. I will be watching this closely and will quickly answer any questions. If I've left anything out it is because I did not know it was needed. PS: I am loath to ask obviously basic questions, but I am tired and wish to fix this before tomorrow. Also, this is my first server installation, thank you for your help.

    Read the article

  • How to forever disable driver signature enforcement in Windows 8

    - by IneedHelp
    Is there a way to forever disable driver signature enforcement in Windows 8? I keep seeing this solution posted on various blogs and forums: bcdedit -set loadoptions DISABLE_INTEGRITY_CHECKS bcdedit -set TESTSIGNING ON but it is not working, at least not like when you manually disable driver signature enforcement. To disable driver signature enforcement, I currently have to do this everytime I restart my PC: 1. From the Metro Start Screen, open Settings (move your mouse to the bottom-right-corner of the screen and wait for the pop-out bar to appear, then click the Gear icon). 2. Click ‘More PC Settings’. 3. Click ‘General’. 4. Scroll down, and click ‘Restart now’ under ‘Advanced startup’. 5. Click ‘Troubleshoot’. 6. Click ‘Advanced Options’ 7. Click ‘Windows Startup Settings’ 8. Click Restart. Is there at least a way to create a shortcut or something? F8, Shift+F8 don't work any more at boot. These MS developers freaks really want everything their way only. What's worse is that when I have to power up my PC, I first have to start normally and then restart with driver signature enforcement disabled, because there is no way to tell Windows 8 to show the troubleshoot screen when a PC is powered up.

    Read the article

  • How to disable "safely remove hardware"

    - by Matt
    I have some windows 7 virtual machines in xen that have devices showing up in "safely remove hardware". I don't want users to ever be able to remove/eject any hardware at all. I'm told vmware has a hotplug option. xen doesn't seem to provide this for pci passthrough devices, therefore I'm looking for a reliable solution to prevent users from ejecting devices. This issue is not necessarily related just to virtual machines but seems to be a common problem with devices that get wrongly reported as removable. I'm ideally looking for a way to prevent all devices from appearing or just prevent the safely remove hardware option from ever coming up. I've tried setting device capabilities for specific devices on boot with a script but this for some reason doesn't always seem to work reliably. Is there a way to prevent this icon from appearing in the notification area completely, either by registry key or group policy? I should point out that setting this in group policy to "Administrators" did not seem to work. [Computer ConfigurationWindows SettingsSecurity SettingsLocal PoliciesSecurity Optionsevices:Allowed to format and eject removable media]

    Read the article

  • Dell XPS 15 L502X hard drive Partition

    - by Mohan Gajula
    I have a situation here. I got my new Dell XPS 15 Laptop. The configuration of hard drive is as below : Volume 1: (OEM Partition): 133MB Volume 2: OS (C:): 685.25 GB Volume 3: Recovery : 13.25 GB Now, I am trying to re-partition my C Drive to have a C: drive with 100 GB and a new drive with 585 GB. Earlier, I tried using the Windows 7 Disk Management to shrink and extend the volume. That lead to the OS and hard drive not working. Dell Tech support tried to fix the issue, but they were not able to fix the issue online. Later a Dell Technician arrived my place, and replaced the hard drive with a new hard drive. Please help me re-partition the C: Drive with 100 GB, and new D drive with 585 GB. I don't want to lose my Recovery Partition. SOLUTION As Suggested by KCotreau below , I have done exactly. I have resized the C drive to 100 GB. And then applied the changes. Windows got restarted. On the boot screen, the partition was taking place. It took around 30 mins ( approx. ). Once after restart, I can see my C drive is 100 GB. Now opened the Easeus again. And created a new partition for the free space ( 585 GB ) this took 10 seconds to create. Here goes the screenshot after partitioning. Thanks to KCotreau. You are amazing.

    Read the article

  • Auto-rebuild RAID6 with MDADM

    - by user65632
    Hello everybody, i'm new in this forum, and because I see that a lot of people get helped here, i'll ask my question here! I have a openSUSE 11.3 Linux computer with 5 disks of 1TB (WD enterprise disks) in it. with mdadm I configured an RAID6 device. Now, after a lot of thorough testing, i've noticed that when the computer goes down unsuspectedly it could happen (1 time out of 10) that while booting, the md0 device isn't recognised, and then the machine goes in "recovery mode", which means that i have to 'CTRL + C' it so it can boot to openSUSE. Once in openSUSE i have to readd the drive manually with 'mdadm /dev/md0 --add /dev/sdX'. After this everything works back fine (after resynching). So my question is: Is there a way to auto-rebuild the RAID6 device when there are problems? and how can I stop this "recovery mode" from happening. Because the computer will be in a place I can't go to, to connect a keyboard, 'CTRL + C' it just to get in openSUSE. If you could help me, I would be a very very very! happy man! :-) thanks in advance! Mikhail

    Read the article

  • tcp msl timeout implementation in linux

    - by iamrohitbanga
    The following is given in the book TCP IP Illustrated by Stevens Quiet Time Concept The 2MSL wait provides protection against delayed segments from an earlier incarnation of a connection from being interpreted as part of a new connection that uses the same local and foreign IP addresses and port numbers. But this works only if a host with connections in the 2MSL wait does not crash. What if a host with ports in the 2MSL wait crashes, reboots within MSL seconds, and immediately establishes new connections using the same local and foreign IP addresses and port numbers corresponding to the local ports that were in the 2MSL wait before the crash? In this scenario, delayed segments from the connections that existed before the crash can be misinterpreted as belonging to the new connections created after the reboot. This can happen regardless of how the initial sequence number is chosen after the reboot. To protect against this scenario, RFC 793 states that TCP should not create any connections for MSL seconds after rebooting. This is called the quiet time Few implementations abide by this since most hosts take longer than MSL seconds to reboot after a crash. Do operating systems wait for 2MSL seconds now after a reboot before initiating a TCP connection. The boot times are also less these days. Although the ports and sequence numbers are random but is this wait implemented in Linux? Also RFC 793 says that this wait is not required if history is maintained. Does linux maintain any history of used sequence numbers for connections to handle this case?

    Read the article

  • RHEL 5.2 installing on ProLiant BL460c - hangs at 'now booting the kernel'

    - by Dr Rocket Mr Socket
    As the title states, I have a problem. This server and the installation disc are also on the other side of the world to me so... So far, I have tried to start the install with the parameters: linux text noapic noacpi no=apic no=acpi which results in the same hang. I have also disabled a PCI ethernet adapter, I am uneasy about disabling the onboard ethernet adapter I do not know if ILO uses this. Anyone have any advice? Much appreciated. EDIT: full output after trying to begin the installation. boot: linux text Loading initrd.img.................. Loading vmlinuz....... Uncompressing Linux...done. Now booting the kernel stays on this for hours EDIT2: adding the 'mem=40960M' (server has 40 gigs of ram) parameter allows it to proceed but the following output directly after 'Now booting the kernal' Memory: sized by int13 0e801h initrd extends beyond end of memory (0x00ef2090 > 0x00000000) disabling initrd Console: 16 point font, 400 scans Console: colour VGA+ 80x25, 1 virtual console (max 63) pcibios_init : BIOS32 Service Directory Structure at 0x000ffee0 pcibios_init : BIOS32 Service Directory entry at 0xf0000

    Read the article

  • Black Screen on Logon (windows 7 home premium)

    - by Blacknight334
    i have been having some trouble with a dell Xps 15 laptop that i recently purchased. it is under a month old, and a problem has occurred, upon logging on just after start up, the computer will just sit on a black log on screen (with the mouse still visible and active) for a few minutes. it is extremely annoying, especially when im in a rush. the laptop is under a month old. So far, i have tried to update the drivers, all windows update, and still, nothing. also, it doesnt seem to do it when i log into safe mode, or if it does, it will do it for less than 10 seconds, then load the desktop (in normal boot, it usually takes a few minutes). i have also run a number of the inbuilt diagnostics, but found no errors. i want to avoid having to do a system restore for as long as i can. does anyone know anything that can help? (the laptop is running a 500gb SSD, 2gb Nvidia 640m, 8gb ram, 3rd gen i7 quad core with 8 threads) thanks.

    Read the article

  • SATA Windows 7 Problems

    - by Isaacs
    Scenario: Core 2 Duo processor, Gigabyte MB, 4 SATA Western digital 500 GB hard drives, windows 7 64 bit. Problem: Copying data from USB or among SATA hard drives is faulty. When trying to copy 20GB from one HD to another it starts off with normal ~14-15 MB/s transfer rates and eventually bogs down to < 120KB/s transfer rates. If I leave it alone over night I come back with my computer crashed and setting at BIOS detecting hard drives. Troubleshooting: Removed all but 1 HD with OS on it, everything seems to be happy. I can copy large files from USB HD to main/single HD. Ran SpinRite on all hard drives, no errors found. Tried adding one HD to machine and problem exists, tried switching SATA cables, and SATA ports on MB. Reinstalled windows 7 x2 (from different disks..). Oddly enough if I boot to a ubuntu everything works fine. Getting ready to purchase a new MB, but wanted to see if anyone had suggestions. Thanks!

    Read the article

  • vyatta Server Reboots by itself

    - by Fernando
    I have an issue regarding some hardware, maybe you can help me. First, I set up a Supermicro Superserver SYS-5016I-NTF with a Intel Xeon X3470 and 4 GB of Ram with a Hotlava Card Tambora 64G4 with Intel Chipset 82599EB and 4x10G SPF+ ports. Installed Vyatta community edition 6.3. I used it as router making BGP connections with 2 operators. No load at all, temp ranges normal. But the issue is that it reboots by itself in a ramdom way. Not very often, once every few days. But it is unacceptable for production purposes. So I try to test on different hardware, and installed Vyatta community edition 6.3 on a Dell PowerEdge 2950, with Xeon(R) E5345 @ 2.33GHz and 4 GB of Ram. Same Vyatta configuration as Supermicro Server. With same hotlava Card model ( I bought two of them ) Well I have reboots with this equipment as well. Same frecuency as above. I have checked syslog no strange logs until boot process starts to be logged. So it seems server reboot suddenly. I have installed latest driver for the chipset of the Hotlava card. Servers are placed in a datacenter with UPS So finally two things in common in both servers: Hotlava Card. Someone with issues with this card, or the chipset?? Could be it this card?? Vyatta 6.3 community edition. I don't thing is the problem. Is a regular Debian with packages to glue together different services. Or maybe is something I am missing. Andy ideas, suggestions?? Thank you very much... Fernando

    Read the article

  • Need help with custom init script

    - by churnd
    I'm trying to set up an init script for a process on redhat linux: #!/bin/sh # # Startup script for Conquest # # chkconfig: 345 85 15 - start or stop process definition within the boot process # description: Conquest DICOM Server # processname: conquest # pidfile: /var/run/conquest.pid # Source function library. This creates the operating environment for the process to be started . /etc/rc.d/init.d/functions CONQ_DIR=/usr/local/conquest case "$1" in start) echo -n "Starting Conquest DICOM server: " cd $CONQ_DIR && daemon --user mruser ./dgate -v - Starts only one process of a given name. echo touch /var/lock/subsys/conquest ;; stop) echo -n "Shutting down Conquest DICOM server: " killproc conquest echo rm -f /var/lock/subsys/conquest rm -f /var/run/conquest.pid - Only if process generates this file ;; status) status conquest ;; restart) $0 stop $0 start ;; reload) echo -n "Reloading process-name: " killproc conquest -HUP echo ;; *) echo "Usage: $0 {start|stop|restart|reload|status}" exit 1 esac exit 0 However, the cd $CONQ_DIR is getting ignored, because the script errors out: # ./conquest start Starting Conquest DICOM server: -bash: ./dgate: No such file or directory [FAILED] For some reason, I have to run dgate as ./dgate. I cannot specify the full path /usr/local/conquest/dgate The software came with an init script for a Debian system, so the script uses start-stop-daemon, with the option --chdir to where dgate is, but I haven't found a way to do this with the Redhat daemon function.

    Read the article

  • Computer resetting semi-randomly

    - by Peter
    Hi, I'm having a problem with my desktop whereby it sometimes resets itself semi-randomly. For example, I'll switch it on, it'll boot an OS and shortly after getting to the desktop it will immediately reset with no warning. The time isn't consistent - sometimes it does it before reaching login. I'm pretty sure it's not an OS thing; have tried Ubuntu and a Windows install and both exhibit it. It also doesn't appear to be heat-related because sometimes it appears to be able to "get past" it and will then run stably even under load; if anything it seems to be worse from a cold start. My gut feeling is some kind of power issue but I'm clutching at straws a little. Any suggestions on how I could go about testing it or trying to narrow the problem down would be appreciated. The machine is four years old now so while I can replace components if needed, it's not worth enough that I'm comfortable buying new parts without being pretty confident that they'll fix the problem. Thanks in advance for any help :) Edit: Okay, the motherboard is a MSI K8N SLI; CPU is an Athlon64 X2 4200+. Has one video card, a GeForce 7800GT. 1GB RAM, not sure of brand; 3 hard drives, two SATA and one PATA. Flashed motherboard to latest BIOS some time ago. Edit the Second: I thought I'd narrowed it down to the PSU for a while, but then it recurred again. I ended up pulling everything out but CPU, RAM and motherboard and it still seems to be stuffed (if anything, it's gotten worse in the last couple of days). I assume it's one of those three components, but the machine is old enough that I don't really want to spend money replacing any of them. So thanks for everyone's suggestions; much appreciated!

    Read the article

  • Finding a shared HDD attached to the network from my F-13 machine

    - by Ramy
    Sorry for the slew of n00bie questions, but here is one more. I recently partitioned my 1.5TB harddrive according to this question I then bought this to attach the harddrive to my network. The problem is, how do I navigate to the hard drive to move files over the network to the HDD. should this be moved to serverfault? update: the disk isn't even showing up when i call "fdisk -l" (as root). How can I mount it if I can't even find it? [root@Moonface ~]# /sbin/fdisk -l Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00018598 Device Boot Start End Blocks Id System /dev/sda1 * 1 64 512000 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 64 19458 155777024 8e Linux LVM Disk /dev/dm-0: 53.7 GB, 53687091200 bytes 255 heads, 63 sectors/track, 6527 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/dm-0 doesn't contain a valid partition table Disk /dev/dm-1: 4764 MB, 4764729344 bytes 255 heads, 63 sectors/track, 579 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/dm-1 doesn't contain a valid partition table Disk /dev/dm-2: 101.0 GB, 101032394752 bytes 255 heads, 63 sectors/track, 12283 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/dm-2 doesn't contain a valid partition table

    Read the article

  • init.d script runs correctly but process doesn't live when booted fully up

    - by thetrompf
    I have a problem with an init.d script #!/bin/bash ES_HOME="/var/es/current" PID=$(ps ax | grep elasticsearch | grep $ES_HOME | grep -v grep | awk '{print $1}') #echo $PID #exit 0 case "$1" in start) if [ -z "$PID" ]; then echo "Starting Elasticsearch" echo "Starting Elasticsearch" /var/tmp/elasticsearch su -m elasticsearch -c "${ES_HOME}/bin/elasticsearch" exit 0; else echo "Elasticsearch already running" echo "Elasticsearch already running" /var/tmp/elasticsearch exit 0; fi ;; stop) if [ -n "$PID" ]; then echo "Stopping Elasticsearch" kill ${PID} echo "Stopped Elasticsearch" exit 0; else echo "Elasticsearch is not running" exit 0; fi ;; esac The scripts runs just file, as I can see in /var/tmp/elasticsearch a new line is added after every boot, but if I run: /etc/init.d/elasticsearch stop Just after the server is booted, I get "Elasticsearch is not running", ergo somehow the process does not stay alive. My question is why? and what am I doing wrong? Thanks in advance.

    Read the article

  • Wake OSX 10.8 over WiFi (WoWL - Wake on WiFi Lan)

    - by WrinkledCheese
    I have a stack of Apple Mac minis running SSH servers for remote login. The problem is that I can't seem to get them to wake up. From what I gathered, as of Mac OSX 10.7 you required to have a boot time option set - darkwake=0 10.7 and darkwake=no 10.8. So I tried this and then I came to the realization that this will probably work for a wired connection but I'm using WiFi. My wired connections are used for another local subnet without Internet access, so I have to get it to wake on WiFi. I realize that I can just set the stack of Mac minis to just not sleep, but I'm looking for a sleep enabled option. These services don't require initial response speed as once the connection is made they will be active and once they are no longer active they will hopefully go back to sleep. I have a FreeBSD box running avahi-daemon in order to try and wake the Macs with the Bonjour Service but it doesn't seem to work. I tried registering the service as Gordon suggested in the below post, but that just makes it so that there isn't a timeout when discovering services and resolving them. It still doesn't allow ssh connections to port 22 when it's asleep. For reference, I want what seems like what Gordon Davisson explained on this question: Wake on Demand for Apache server in OS X 10.8

    Read the article

  • KVM error with device pass through

    - by javano
    I am running the following command booting a Debian live CD passing a host PCI device to the guest as a test and KVM errors out; kvm -m 512 -boot c -net none -hda /media/AA502592502565F3/debian.iso -device pci-assign,host=07:00.0 PCI region 1 at address 0xf7920000 has size 0x80, which is not a multiple of 4K. You might experience some performance hit due to that. No IOMMU found. Unable to assign device "(null)" kvm: -device pci-assign,host=07:00.0: Device 'pci-assign' could not be initialized lspci | grep 07 07:00.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 74) I shoved an old spare NIC into my motherboard to test PCI pass through. I have searched the Internet with Goolge and found that errors relating to "No IOMMU found" often mean the PCI device is not supported by KVM. Does KVM have to support the device being "passed-through"? I though the point was to pass the device through and let the guest worry about it? Ultimately I want to pass-through a PCI random number generator, is this not going to be possible with KVM? Thank you.

    Read the article

  • Unable to use OpenGL or install nVidia driver on openSUSE 12.2

    - by djechelon
    I have an ASUS N76VZ laptop with 12.2 openSUSE and GeForce GT650M card. I found that KDE doesn't allow me to use OpenGL rendering. I tried to install nVidia's driver from script but once it writes the xorg.conf file I'm unable to boot desktop. I have the following errors in system log Oct 30 08:28:13 RAYNOR kdm[2727]: X server died during startup Oct 30 08:28:13 RAYNOR kdm[2727]: X server for display :0 cannot be started, session disabled I noticed that the /etc/X11/xorg.conf backup file was empty, so I renamed the new xorg.conf and left none: the desktop booted!!! How can I fix OpenGL rendering with or without driver installation? [Update]: Xorg.0.log says [ 1434.207] compiled for 4.0.2, module version = 1.0.0 [ 1434.207] Module class: X.Org Server Extension [ 1434.207] (II) NVIDIA GLX Module 304.60 Sun Oct 14 20:44:54 PDT 2012 [ 1434.207] (II) Loading extension GLX [ 1434.207] (II) LoadModule: "record" [ 1434.207] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so [ 1434.207] (II) Module record: vendor="X.Org Foundation" [ 1434.207] compiled for 1.12.3, module version = 1.13.0 [ 1434.207] Module class: X.Org Server Extension [ 1434.207] ABI class: X.Org Server Extension, version 6.0 [ 1434.207] (II) Loading extension RECORD [ 1434.207] (II) LoadModule: "dri" [ 1434.207] (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so [ 1434.207] (II) Module dri: vendor="X.Org Foundation" [ 1434.207] compiled for 1.12.3, module version = 1.0.0 [ 1434.207] ABI class: X.Org Server Extension, version 6.0 [ 1434.207] (II) Loading extension XFree86-DRI [ 1434.207] (II) LoadModule: "nvidia" [ 1434.208] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so [ 1434.208] (II) Module nvidia: vendor="NVIDIA Corporation" [ 1434.208] compiled for 4.0.2, module version = 1.0.0 [ 1434.208] Module class: X.Org Video Driver [ 1434.208] (II) NVIDIA dlloader X Driver 304.60 Sun Oct 14 20:24:42 PDT 2012 [ 1434.208] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs [ 1434.208] (++) using VT number 8 [ 1434.320] (EE) No devices detected. [ 1434.320] Fatal server error: [ 1434.320] no screens found [ 1434.320] Please consult the The X.Org Foundation support at http://wiki.x.org for help.

    Read the article

  • Best way to integrate applications to windows 7 install.wim image

    - by cyph3r
    I have right now an unmodified .iso of a windows 7 32bit and 64bit installation disk. And I need to integrate to that some applications (office, adobe reader etc) and windows updates so that when windows are installed the above applications/updates are already installed and working. Requirements: My output has to be a install.wim image containing the new/improved windows installation files because the deployment is done via a pxe server and a custom windowsPE enviroment. The procedure to create the install.wim has to be as automatic as possible. I can't create it manually every time I want to incorporate a new windows or application update to the image. The image will be installed on 100+ computers so it needs to be 'generic'. I've never done something like this before but from what I searched a possible solution to this issue would be: To create a reference installation (preferably on a vm so I can take snapshots) complete with its applications/updates/settings. After the complete setup I take a snapshot of the installation Run C:\Windows\System32\sysprep\sysprep.exe /oobe /generalize /shutdown to sysprep the machine. Boot to a WindowsPE enviroment and capture the .wim image using gimagex. Deploy the .wim and enjoy the rapid installation times. :D Does that sound ok? Would you recommend anything else? Right now the applications are installed after the installation of windows is complete. So the total installation time is quite long. That's why I need a different approach.

    Read the article

  • Update BIOS on Sun Fire X4150 server

    - by Massimo
    I have some Sun Fire X4150 servers with a very old BIOS release (1ADQW015), which seems to have some compatibility problems with WMware ESX Server 3.5 and Windows 2008 R2 virtual machines; so I want to update the BIOS on them. The problem: according to this page, if your servers run ELOM (mine do), you first need to update to the latest ELOM release, then to the interim transition release, then finally you can update to the latest one. Ok, I'm willing to do that... but it looks like Sun (now Oracle) will happily let you download the latest firmware DVD (3.3.0), but it will not let you download the transition release (2.0) if you don't have a support contract. Well, I actuall don't care at all about the servers' management controllers (we don't even use them), so upgrading from ELOM to ILOM is totally irrelevant to me; but I need to update the servers' BIOS. So my question is: can I update the servers' BIOS to the latest version without doing the full ELOM-to-ILOM migration, or will this not work (or even make the servers unusable)? Do BIOS versions and SP ones need to be matched, or can one be updated without bothering with the other? Bonus question: if this whole ELOM-to-ILOM thing actually is needed in order to update the BIOS, can that 2.0 CD-ROM be obtained without having a support contract with Sun/Oracle (which we are definitely not going to sign, being that quite old hardware)? Update: I tried upgrading only the BIOS on one of the servers, and it didn't boot anymore. So it really looks like a full firmware upgrade is needed, and the management controller and BIOS versions should be kept in sync. So... where can I find that *&!£%$% 2.0 CD-ROM? Or at least the transition firmware that can be found on it?

    Read the article

  • Network card very slow, only on Windows

    - by J Penguin
    This only happens to 1 of my machine, and only when booting into Windows 7. No matter what network card I put in, Windows would default its mode to 10Mbps full duplex. Transfer speed is approximately 1 MB/s. If I set it to 100Mbps, the transfer drops to 100-200K/s. If I set it to 1000Mbps, the connection is lost completely. I've tried swapping in different cards, both PCI-E and PCI. I'v etried update the windows, I've tried reinstalling the drivers... On this very same machine, if I boot into Fedora, it can use the card at its full capacity 1000Mbps transfering 80+ MB/s And all the cards work just fine when plugging into other machines on the same network. I'm very curious. What could be the reason for this? The only different software that this machine has is virtual box with a VPN emulator, but disabling that VPN doesn't seem to do anything. I would like to get this fixed, hopefully, without reinstalling windows _< Will that be possible?

    Read the article

  • Why I cannot copy install.wim from Windows 7 ISO to USB (in linux env)

    - by fastreload
    I need to make a USB bootable disk of Windows 7 ISO. My USB is formatted to NTFS, ISO is not corrupt. I can copy install.wim elsewhere but I cannot copy it to USB. I even tried rsync. rsync error sources/install.wim rsync: writefd_unbuffered failed to write 4 bytes to socket [sender]: Broken pipe (32) rsync: write failed on "/media/52E866F5450158A4/sources/install.wim": Input/output error (5) rsync error: error in file IO (code 11) at receiver.c(322) [receiver=3.0.8] Stat for windows.vim File: `X15-65732 (2)/sources/install.wim' Size: 2188587580 Blocks: 4274600 IO Block: 4096 regular file Device: 801h/2049d Inode: 671984 Links: 1 Access: (0664/-rw-rw-r--) Uid: ( 1000/ umur) Gid: ( 1000/ umur) Access: 2011-10-17 22:59:54.754619736 +0300 Modify: 2009-07-14 12:26:40.000000000 +0300 Change: 2011-10-17 22:55:47.327358410 +0300 fdisk -l Disk /dev/sdd: 8103 MB, 8103395328 bytes 196 heads, 32 sectors/track, 2523 cylinders, total 15826944 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc3072e18 Device Boot Start End Blocks Id System /dev/sdd1 * 32 15826943 7913456 7 HPFS/NTFS/exFAT hdparm -I /dev/sdd: SG_IO: bad/missing sense data, sb[]: 70 00 05 00 00 00 00 0a 00 00 00 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ATA device, with non-removable media Model Number: UF?F?A????U]r???U u??tF?f?`~ Serial Number: ?@??~| Firmware Revision: ????V? Media Serial Num: $I?vnladip raititnot baelErrrol aoidgn Media Manufacturer: o eparitgns syetmiM Standards: Used: unknown (minor revision code 0x0c75) Supported: 12 8 6 Likely used: 12 Configuration: Logical max current cylinders 17218 0 heads 0 0 sectors/track 128 0 -- Logical/Physical Sector size: 512 bytes device size with M = 1024*1024: 0 MBytes device size with M = 1000*1000: 0 MBytes cache/buffer size = unknown Capabilities: IORDY(may be)(cannot be disabled) Queue depth: 11 Standby timer values: spec'd by Vendor R/W multiple sector transfer: Max = 0 Current = ? Recommended acoustic management value: 254, current value: 62 DMA: not supported PIO: unknown * reserved 69[0] * reserved 69[1] * reserved 69[3] * reserved 69[4] * reserved 69[7] Security: Master password revision code = 60253 not supported not enabled not locked not frozen not expired: security count not supported: enhanced erase 71112min for SECURITY ERASE UNIT. 172min for ENHANCED SECURITY ERASE UNIT. Integrity word not set (found 0xaa55, expected 0x80a5)

    Read the article

  • Windows 7 Aero theme's "greyed out" - no found fix

    - by Robsta
    Brand new machine that was working fine then randomly it changed the theme when I booted into a sort of "basic" theme (white task bar, no see through windows etc) I've done and attempted many fixes and I still don't understand why it doesn't work. I've tried these two solutions: "How to enable Windows 7 Aero Theme" and "Windows 7 Aero Themes Greyed out" These solutions included registy changes, stopping/starting services, and force starting the aero theme. The closest I got seems to be when I went into: Control panel (category view) Find and fix problems (System and Security) Display Aero Desktop Effects I follow through the wizard and let it do its thing and then I get an error window that pops up: Personalization - "This theme can't be applied to the desktop. Try clicking a diffrent theme." That's what I get from the wizard. What can I do? My drivers are all up to date, there are no viruses on the computer, directx is installed and updated, and the registry is all correct. EDIT: When I boot the computer, I get a notification stating that windows failed to communicate with the windows desktop services.

    Read the article

  • fail2ban block ports rules iptable

    - by J Spen
    I just installed Ubuntu Server 14.04 and don't have much experience with IPtables. I am trying to get a basic setup going where I only accept SSH connections on port 22 and 2222. I actually have that working with no problem using fail2ban ssh. Then I wanted to block all other ports except 423 and 4242 but either method of DROPing all connections that are not listed seems not to work and it blocks me out of everything. Below is the setup that works: -P INPUT ACCEPT -P FORWARD ACCEPT -P OUTPUT ACCEPT -N fail2ban-ssh -A INPUT -p tcp -m multiport --dports 22,2222 -j fail2ban-ssh -A fail2ban-ssh -j RETURN I tried to change it either to: -P INPUT DROP -P FORWARD ACCEPT -P OUTPUT ACCEPT -N fail2ban-ssh -A INPUT -p tcp -m multiport --dports 22,2222 -j fail2ban-ssh -A fail2ban-ssh -j RETURN or: -P INPUT ACCEPT -P FORWARD ACCEPT -P OUTPUT ACCEPT -N fail2ban-ssh -A INPUT -p tcp -m multiport --dports 22,2222 -j fail2ban-ssh -A INPUT -j DROP -A fail2ban-ssh -j RETURN I have noticed that the rules for fail2ban-ssh are automatically added to my iptables on boot because if I save them with iptables-persistant they are entered twice. How do I go about blocking everything accept those 2 ports using fail2ban? Is it a bad fail2ban configuration or do I need to add the fail2ban-ssh -j Return somewhere else in my code.

    Read the article

  • Cannot find FIS partition 'initramfs'......... need help!!!

    - by vikramtheone
    Hi Guys, I have a Ubuntu 9.04 Linux running on Freescale's i.MX515(ARM Cortex based) board with me. There were about 250 updates pending and I did that today, well some of the updates failed because of the infamous errors: E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. E: Couldn't rebuild package cache E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. So, when I do the 'sudo dpkg --configure -a' I get new errors related to FIS partition: Cannot find FIS partition 'initramfs' User postinst hook script [/usr/sbin/flash-kernel] exited with value 1 dpkg: error processing linux-image-2.6.28-18-imx51 (--configure): subprocess post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of linux-image-imx51: linux-image-imx51 depends on linux-image-2.6.28-18-imx51; however: Package linux-image-2.6.28-18-imx51 is not configured yet. dpkg: error processing linux-image-imx51 (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of linux-imx51: linux-imx51 depends on linux-image-imx51 (= 2.6.28.18.23); however: Package linux-image-imx51 is not configured yet. dpkg: error processing linux-imx51 (--configure): dependency problems - leaving unconfigured Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-2.6.28-18-imx51 Cannot find FIS partition 'initramfs' dpkg: subprocess post-installation script returned error exit status 1 Whats going wrong here, need help!!! I'm a newbie. Regards Vikram

    Read the article

< Previous Page | 372 373 374 375 376 377 378 379 380 381 382 383  | Next Page >