Search Results

Search found 14757 results on 591 pages for 'switch statement'.

Page 376/591 | < Previous Page | 372 373 374 375 376 377 378 379 380 381 382 383  | Next Page >

  • How do I stop ubuntu from detaching minimize/maximuze/close buttons?

    - by Shahbaz
    Some time ago I managed to get ubuntu to keep the window menubars in the menu rather than the bar above (I'm not sure if this part is unity or compiz, or what's the difference). That was by removing indicator-appmenu Anyway, so now everything is fine except one thing: If I have a window that is full screen, the minimize/maximize/close buttons are still grabbed by the bar on the top. Usually this doesn't cause a problem because the upper-left corner of the full screen window and the whole screen are not too far apart. However, one thing happens to me a lot, and that is I am working on something (programming), then I need to check some things from other places so I open some windows, see what I want and switch back to my work. Those windows however are temporary so at some point I want to close them. Now here's what happens: I have the focus on some window and I can't close the maximized window behind it unless I click on the window first, so that the buttons appear and then close it. I couldn't find anything on the internet about this. Is this something that's hardcoded in unity/compiz/whatever or is there actually a way to configure this?

    Read the article

  • forcing upgrade or how to upgrade packages after update failed

    - by Orosjopie
    How do I continue upgrade or fix upgrade as upgrading in 13.04 to 13.10 failed. I'm currently running terminal in restore mode. I get the error unmet dependencies, but tried to install apt-get -f install, but get this error: unable to fetch some archives. using apt-get update also brings errors for example: failed to fetch http: archive.canonical.com/ubuntu/dists/quantal/release.gpg Could not resolve 'archive.canonical.com. Is it my internet connection? Its currently connected via a network cable and internet is on other computers. If internet on my ubuntu 13.10, how do I switch it on? or how can fix my upgrade problem that I can boot ubuntu normal, backup, then format and reload ubuntu 13.10 properly? I posted this problem that has also linked to this problem I mentioned: upgrading to ubuntu 13.10 failed/crashed. I did manager to install/upgrade some of the files and got ubuntu 13.10 to reboot, but not 100%, as it is slow and the unity desktop is not showing 100%. in trying some of the commands online, I get the error that the activity manager is not installed, when trying to install it, it conflicts with activity-log-manager-common. Please assist.

    Read the article

  • Xubuntu 14.04 with Compton, strange screen tearing, only when playing videos though (advice needed)

    - by LinuxDudester
    Hello beloved community, Yet again I am in need of your great expertise. I ran into a very strange issue and just can't wrap my mind around it. I'm running Xubuntu 14.04 exclusively, with Compton installed. The OS runs great and I have absolutely no screen tearing when I move my windows around, scroll in my web browser, work in Gimp or Photoshop (wine) or even when I play very graphic demanding games, like Metro Last Light, Euro Truck Driver 2 and so on. There's not a tiny bit of tearing to see, but as soon as I play videos, in xbmc, vlc or parole media player the tearing begins (strangely enough this does not apply to youtube videos). I followed all available workarounds on askubuntu and the ubuntu forum,like the 50-xserver-command.conf, startx /etc/X11/Xsession /usr/bin/xbmc-standalone -- -bs or libsdl1.2debian fix and many more, but to no avail. I also tried the Open Source Nouveau display drivers as well, but for some odd reason they don't work so great on my system or at least with my graphics card. Even with Compton installed and configured, I have an extreme amount of screen tearing, as soon as I switch to the proprietary Nvidia drives the screen tearing is gone completely, except for the video playback with xbmc, vlc or parole media player. System info for your reference: OS: Xubuntu 14.04 Linux-x86_64 - Processor: Intel Core i7-4770S CPU @ 3.10GHz - Ram: 16 GB - GeForce GT 750M 1024 MB - Nvidia Driver: 331.38 Has anyone experienced such an odd issue or do you have any advice on how I could fix this? I would appreciate any help! Have a nice day!

    Read the article

  • Wake laptop when lid is opened?

    - by crackout12
    I have a SAMSUNG laptop, which by the experience in the last months, has been a great one. I am actually implementing some functionality to it, and since I noticed, I am able to wake up my laptop from sleep by just opening the lid on Windows 7, however, I need to press to power button to wake up in Ubuntu. Using a program called i-nex, I noted that the kernel DOES dettect a "lid switch", and I am looking forward to use it to wake up function. Any ideas? UPDATE: Thanks @yossile for bringing up some clues! However, output of command cat /proc/acpi/wakeup does not show the LID device. I still tried the second set of commands you gave me with no effect. Then I tried experimenting, guessing that LID should be named by other value, so I tried enabling the others. No victory so far. But I noticed that devices that did not have any pci listings were disabled at all time no matter what I tried. Here is the output of command cat /proc/acpi/wakeup: root@samsung:~# cat /proc/acpi/wakeup Device S-state Status Sysfs node PCE4 S4 *disabled pci:0000:00:04.0 SBAZ S4 *disabled pci:0000:00:14.2 P0PC S4 *disabled pci:0000:00:14.4 GEC S4 *disabled PE20 S4 *disabled pci:0000:00:15.0 PE21 S4 *disabled PE22 S4 *disabled pci:0000:00:15.2 PE23 S4 *disabled PWRB S5 *enabled So maybe it could be that LID is either GEC,PE21, or PE23? Still, there is /proc/acpi/button/lid/LID/state file which shows that LID is opened. Any more ideas?

    Read the article

  • Applying Interactive Sorting to Multiple Columns in Reporting Services

    - by smisner
    A nice feature that appeared first in SQL Server 2008 is the ability to allow the user to click a column header to sort that column. It defaults to an ascending sort first, but you can click the column again to switch to a descending sort. You can learn more about interactive sorts in general at the Adding Interactive Sort to a Data Region in Books Online. Not mentioned in the article is how to apply interactive sorting to multiple columns, hence the reason for this post! Let’s say that I have a simple table like this: To enable interactive sorting, I open the Text Box properties for each of the column headers – the ones in the top row. Here’s an example of how I set up basic interactive sorting: Now when I preview the report, I see icons appear in each text box on the header row to indicate that interactive sorting is enabled. The initial sort order that displays when you preview the report depends on how you design the report. In this case, the report sorts by Sales Territory Group first, and then by Calendar Year. Interactive sorting overrides the report design. So let’s say that I want to sort first by Calendar Year, and then by Sales Territory Group. To do this, I click the arrow to the right of Calendar Year, and then, while pressing the Shift key, I click the arrow to the right of Sales Territory Group twice (once for ascending order and then a second time for descending order). Now my report looks like this: This technique only seems to work when you have a minimum of three columns configured with interactive sorting. If I remove the property from one of the columns in the above example, and try to use the interactive sorting on the remaining two columns, I can sort only the first column. The sort on the second column gets ignored. I don’t know if that’s by design or a bug, but I do know that’s what I’m experiencing when I try it out!

    Read the article

  • CodePlex Daily Summary for Friday, June 07, 2013

    CodePlex Daily Summary for Friday, June 07, 2013Popular ReleasesASP.NET MVC Forum: MVCForum v1.3.5: This is a bug release version, with a couple of small usability features and UI changes. All the small amount of bugs reported in v1.3 have been fixed, no upgrade needed just overwrite the files and everything should just work.Json.NET: Json.NET 5.0 Release 6: New feature - Added serialized/deserialized JSON to verbose tracing New feature - Added support for using type name handling with ISerializable content Fix - Fixed not using default serializer settings with primitive values and JToken.ToObject Fix - Fixed error writing BigIntegers with JsonWriter.WriteToken Fix - Fixed serializing and deserializing flag enums with EnumMember attribute Fix - Fixed error deserializing interfaces with a valid type converter Fix - Fixed error deser...Christoc's DotNetNuke Module Development Template: DotNetNuke 7 Project Templates V2.3 for VS2012: V2.3 - Release Date 6/5/2013 Items addressed in this 2.3 release Fixed bad namespace for BusinessController in one of the C# templates. Updated documentation in all templates. Setting up your DotNetNuke Module Development Environment Installing Christoc's DotNetNuke Module Development Templates Customizing the latest DotNetNuke Module Development Project TemplatesPulse: Pulse 0.6.7.0: A number of small bug fixes to stabilize the previous Beta. Sorry about the never ending "New Version" bug!ZXMAK2: Version 2.7.5.3: - debugger: add LPC indicator (last executed opcode pc) - add host joystick support (written by Eltaron) - change file extension for CMOS PENTEVO to "cmos" - add hardware value monitor (see Memory Map for PENTEVO/ATM/PROFI)QlikView Extension - Animated Scatter Chart: Animated Scatter Chart - v1.0: Version 1.0 including Source Code qar File Example QlikView application Tested With: Browser Firefox 20 (x64) Google Chrome 27 (x64) Internet Explorer 9 QlikView QlikView Desktop 11 - SR2 (x64) QlikView Desktop 11.2 - SR1 (x64) QlikView Ajax Client 11.2 - SR2 (based on x64)BarbaTunnel: BarbaTunnel 7.2: Warning: HTTP Tunnel is not compatible with version 6.x and prior, HTTP packet format has been changed. Check Version History for more information about this release.SuperWebSocket, a .NET WebSocket Server: SuperWebSocket 0.8: This release includes these changes below: Upgrade SuperSocket to 1.5.3 which is much more stable Added handshake request validating api (WebSocketServer.ValidateHandshake(TWebSocketSession session, string origin)) Fixed a bug that the m_Filters in the SubCommandBase can be null if the command's method LoadSubCommandFilters(IEnumerable<SubCommandFilterAttribute> globalFilters) is not invoked Fixed the compatibility issue on Origin getting in the different version protocols Marked ISub...BlackJumboDog: Ver5.9.0: 2013.06.04 Ver5.9.0 (1) ?????????????????????????????????($Remote.ini Tmp.ini) (2) ThreadBaseTest?? (3) ????POP3??????SMTP???????????????? (4) Web???????、?????????URL??????????????? (5) Ftp???????、LIST?????????????? (6) ?????????????????????Media Companion: Media Companion MC3.569b: New* Movies - Autoscrape/Batch Rescrape extra fanart and or extra thumbs. * Movies - Alternative editor can add manually actors. * TV - Batch Rescraper, AutoScrape extrafanart, if option enabled. Fixed* Movies - Slow performance switching to movie tab by adding option 'Disable "Not Matching Rename Pattern"' to Movie Preferences - General. * Movies - Fixed only actors with images were scraped and added to nfo * Movies - Fixed filter reset if selected tab was above Home Movies. * Updated Medi...Nearforums - ASP.NET MVC forum engine: Nearforums v9.0: Version 9.0 of Nearforums with great new features for users and developers: SQL Azure support Admin UI for Forum Categories Avoid html validation for certain roles Improve profile picture moderation and support Warn, suspend, and ban users Web administration of site settings Extensions support Visit the Roadmap for more details. Webdeploy package sha1 checksum: 9.0.0.0: e687ee0438cd2b1df1d3e95ecb9d66e7c538293b Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.93: Added -esc:BOOL switch (CodeSettings.AlwaysEscapeNonAscii property) to always force non-ASCII character (ch > 0x7f) to be escaped as the JavaScript \uXXXX sequence. This switch should be used if creating a Symbol Map and outputting the result to the a text encoding other than UTF-8 or UTF-16 (ASCII, for instance). Fixed a bug where a complex comma operation is the operand of a return statement, and it was looking at the wrong variable for possible optimization of = to just .VG-Ripper & PG-Ripper: VG-Ripper 2.9.42: changes NEW: Added Support for "GatASexyCity.com" links NEW: Added Support for "ImgCloud.co" links NEW: Added Support for "ImGirl.info" links NEW: Added Support for "SexyImg.com" links FIXED: "ImageBam.com" linksDocument.Editor: 2013.22: What's new for Document.Editor 2013.22: Improved Bullet List support Improved Number List support Minor Bug Fix's, improvements and speed upsCarrotCake, an ASP.Net WebForms CMS: Binaries and PDFs - Zip Archive (v. 4.3 20130528): Features include a content management system and a robust featured blogging engine. This includes configurable date based blog post URLs, blog post content association with categories and tags, assignment/customization of category and tag URL patterns, simple blog post feedback collection and review, blog post pagination/indexes, designation of default blog page (required to make search, category links, or tag links function), URL date formatting patterns, RSS feed support for posts and pages...PHPExcel: PHPExcel 1.7.9: See Change Log for details of the new features and bugfixes included in this release, and methods that are now deprecated.Droid Explorer: Droid Explorer 0.8.8.10 Beta: Fixed issue with some people having a folder called "android-4.2.2" in their build-tools path. - 16223 Magick.NET: Magick.NET 6.8.5.402: Magick.NET compiled against ImageMagick 6.8.5.4. These zip files are also available as a NuGet package: https://nuget.org/profiles/dlemstra/patterns & practices: Data Access Guidance: Data Access Guidance Drop3 2013.05.31: Drop 3DotNet.Highcharts: DotNet.Highcharts 2.0 with Examples: DotNet.Highcharts 2.0 Tested and adapted to the latest version of Highcharts 3.0.1 Added new chart types: Arearange, Areasplinerange, Columnrange, Gauge, Boxplot, Waterfall, Funnel and Bubble Added new type PercentageOrPixel which represents value of number or number with percentage. Used for sizes, width, height, length, etc. Removed inheritances in YAxis option classes. Closed issues: 682: Missing property - XAxisPlotLinesLabel.Text 688: backgroundColor and plotBackgroundColor are...New ProjectsAccountingTest: just to learn asp.net mvc 3 Agile Poker Cards for Windows Mobile: During a scrum or other agile processes, you have to estimate the size of a user story during a planning session. With the Agile Poker Cards program there is no need for using real cards anymore!Buildinator: Buildinator generates TFS Build definitions from an XML file, enabling canonical "templates" that make it easy to add or copy build definitions.Clipboard Capture Plugin: Captures an image in the clipboard and gives you more options to insert the image into Live WriterComercial HS: Commercial hsCommonExtranet: CommonExtranet is a basis for an Extranet web site with a user authentication mechanism that incorporates password aging and various features expected on a domain LogOnDataVeryLite: DataVeryLite is a lightweight *Persistence Framework*. DataVeryLite???????*?????*. ??????Nhibernate?????,??Linq to sql???????,?????DataVeryLite.daydayup: snd\realdamon_cpDNN Extension Url Providers: The DNN Extension Url Providers project contains installable extensions for extending DNN URL functionality.DotNetNuke Kitchen Sink: A sample module project for DotNetNuke with a variety of different scenarios covered.Football Team Management: Manage team, player, match and staffFreePiano: Play piano using your computer keyboard.GIF animator: Dev in progessI'm Feeling Lucky Plugin: Lets you put a link in that acts as though doing an I'm Feeling Lucky search.Insert Video Jnr: This is a baby version of my Video plugin, it is intended for Hosted Wordpress blogs only and shouldn't be used with other blog providers.jabbrmercurial: 22Kax.WebControls.RadioButtonList: Web Custom Control that extend RadioButtonList to allow uncheckable state.Kinect Screen Aware: Kinect Screen Aware uses a Kinect to detect touch, hover, gestures, and voice on a standard television display. It's designed to be low cost and easy to setuplppbop: Aplikasi Laporan Bantuan Operasional PendidikanmobiSms: mobismsnga: National Geography of AzerothRadminPassword: ????????? ??? ??????????????? ????? ??????? ? ????????? ????????? ?????????? ?????????? ?? Radmin. A program to automatically enter the passwords in the famous PC remote control software Radmin.Rx Heat: Rx Heat is a library of helper classes that complements the Reactive Extensions Library with additional features. Schema Generator: The basic idea behind this utility is to emit the database schema from an existing SQL Server database. From a developer perspective, it is sometimes very much handy to quickly take a printout of the database structure for creating the UI layout.SharePoint Packager: Perform the instalation, upgrade and retraction of Ms Sharepoint Applications fast, easy and efficientsmartTouch: :-)SpotifyLync: A small tray application that reports your Spotify status to your Microsoft Lync client. Alos contains additional Spotify / Lync features.Syngine: A simple to use game framework using MonoGame and Farseer Physicstest060601CM: testtestMC053003: testToSic.Eav: A powerfull EAV (Entity-Attribute-Value) system created by 2sic Internet Solutions in Switzerland. It's currently mainly used inside 2SexyContent for DotNetNukeTraceLight: <project name> TraceLight ray tracer </project name> <programming language> C# </programming language>trakr: minimalist webtracking software written in python and twistedTwitterXML: A .NET wrapper library for the Twitter REST API. Currently, all of the methods return an XMLDocument. Also included are classes for Users, Statuses, and Direct Messages that use XML serialization for converting the XML responses to objects with a Deserialize() call.Universal Parking Centre: Universal Parking Centre is a website-based software developed by Center Code to help you in organizing your parking business.Velocity OS: Be fast, Be strong. It's Velocity.WinKeGen Code Samples: This project will allow beginning developers a close look at some code samples and variations of how to use those samples in their own code.WinRT Synth lib: Project Description this project aims to provide an easy-to-use API, for sound synthesis under winrt, in c#. It use the XAudio2 api for the playback of the sounWpfCollaborative3D: WpfCollaborative3DX-Parking: Our online parking sites , try at : x-parking.pemrogramaninternet.infoYnote Plugins: Ynote Classic Plugins which help in transforming Ynote Classic into a powerful HTML / XML Editor or an IDE.

    Read the article

  • Migrating Forms to Java or ADF, the truth and no FUD

    - by Grant Ronald
    The question about migrating Forms to Java (or ADF or APEX) comes up time and time again.  I wanted to pull some core information together in a single blog post to address this question. The first question I always ask is "WHY" - Forms may still be a viable option for you so "if it ain't broke don't fix it".  Bottom line is whatever anyone tells you, its going to be a considerable effort and cost to migrate from Forms to something else so the business is going to want to know WHY you spend all those hard earned dollars switching from something that might have been serving you quite adequately. Second point, if you are going to switch, I would encourage you NOT to look at building a Forms clone.  So many times I see people trying to build an ADF application and EXACTLY mimic the Forms model - ADF is NOT a Forms clone.  You should be building to the sweet spot of your target technology, not your 20 year old client/server technology.  This is also the chance for the business to embrace change, so maybe look at new processes, channels and technology options that weren't available when you first developed your Forms applications. To help you understand what is involved, I've put together a number of resources. Thinking about migration of Forms to Java, ADF or APEX, read this to prepare yourself Oracle Forms to ADF: When, Why and How - this gives you an overview of our vision, directly from Oracle Product Management Redeveloping a Forms Application with Oracle JDeveloper and Oracle ADF.  This is a conference session from myself and Lynn Munsinger on how ADF can be used in a Forms migration/rewrite As someone who manages both Forms and ADF Product Management teams, I've a foot in either camp and am happy to see you use either tool.  However, I want you to be able to make an informed decision.  My hope is that there information sources will help you do that.

    Read the article

  • Happy New Year! Back to school :)

    - by Jim Wang
    A brand new year is upon us and it’s time to get cracking with WebMatrix again…and go back to school :).  Last year we ran a successful product walkthrough for WebMatrix Beta 2 with our students from around the world, gathering awesome feedback for the final version of WebMatrix which is coming soon!  I’d like to take this chance to thank all the students who participated in this effort…you have really helped make the final product much better than it would have been otherwise. In 2011, we’re looking, as always, at bigger and better things.  One of the ideas that has been floating around is the concept of a WebMatrix college course that you could take for actual credit.  Of course, this is going to require coordination with college educators, but we think we’re up to the challenge :) If your school is still using an antiquated language to teach their web development 101 course, and you’d like to switch to WebMatrix, we’d like to hear your voice – better yet if you have contacts from your school and would like to be one of the first to give the program a try!  Comment on this post or email wptsdrext at microsoft.com.  We look forward to partnering with you guys ^^.

    Read the article

  • Better solution then simple factory method when concrete implementations have different attributes

    - by danip
    abstract class Animal { function eat() {..} function sleep() {..} function isSmart() } class Dog extends Animal { public $blnCanBark; function isSmart() { return $this->blnCanBark; } } class Cat extends Animal { public $blnCanJumpHigh; function isSmart() { return $this->blnCanJumpHigh; } } .. and so on up to 10-20 animals. Now I created a factory using simple factory method and try to create instances like this: class AnimalFactory { public static function create($strName) { switch($strName) { case 'Dog': return new Dog(); case 'Cat': return new Cat(); default: break; } } } The problem is I can't set the specific attributes like blnCanBark, blnCanJumpHigh in an efficient way. I can send all of them as extra params to create but this will not scale to more then a few classes. Also I can't break the inheritance because a lot of the basic functionality is the same. Is there a better pattern to solve this?

    Read the article

  • Is using multiple canvas objects a good practice?

    - by user1818924
    We're developing a jump and run game with HTML5 and JavaScript and have to build an own game framework for this. Here we have some difficulties and would like to ask you for some advice: We have a "Stage" object, which represents the root of our game and is a global div-wrapper. The stage can contain multiple "Scenes", which are also div-elements. We would implement a Scene for the playing task, for pause, etc. and switch between them. Each scene can therefore contain multiple "Layers", representing a canvas. These Layer contain "ObjectEntities", which represent images or other shapes like rectangles, etc. Each Objectentity has its own temporaryCanvas, to be able to draw images for one entity, whereas another contains a rectangle. We set an activeScene in our Stage, so when the game is played, just the active scene is drawn. Calling activeScene.draw(), calls all sublayers to draw, which draw their entities (calling drawImage(entity.canvas)). But is this some kind of good practice? Having multiple canvas to draw? Each game loop every layer-context is cleared and drawn again. E.g. we just have a still Background-Layer, … wouldn't it be more useful to draw this once and not to clear it every time and redraw it? Or should we use a global canvas for example in the Stage and just use this canvas to draw? But we thought this would be to expensive...

    Read the article

  • how to choose a web framework and javascript library?

    - by Trylks
    I've been procrastinating learning some framework for web apps w/ some library for AJAX, something like django with prototype, or turbogears with mootools, or zeta components with dojo, grok, jquery, symfony... The point is to spend some of my spare time, have "fun" and create cool stuff that hopefully is some useful. I think maybe I wouldn't like something like GWT or pyjamas because I wouldn't like to "get married" with some technology, I want to keep my freedom to add another javascript library, and so on. I didn't decide even the language yet, but I think I'd prefer python. PHP could be fine if there is some framework that is nice enough. Besides that, I don't even know where to start. I don't feel like learning a framework to then realize there is something that I cannot comfortably do, switch to another framework then find that a third framework has something really cool, etc. And the same goes for javascript libraries. So, some guidance would be really appreciated. I don't really know why are so many options available and what do they aim for, I guess some of them focus on some aspects and some on others, but I just want to make cool and nice apps that I can easily maintain, without spending too much time on coding or learning and avoiding the "trapped in the framework" feeling, when doing something is awfully complicated (or even impossible) with compared with the rest of things or doing that same thing on a different framework. I guess in the end I'll go for django and jquery since they are the most widely used options, afaik, but if I was going for the most widely used options I guess I should choose Java or PHP (I don't really like Java for my spare time, but php is not so bad), so I preferred to ask first. I think the question has to consider both, framework and library, since sometimes they are coupled. I think this is the place to ask this kind of things, sorry if not, and thank you.

    Read the article

  • Dell Alps Touchpad not working

    - by ppls
    I have a Dell 17R SE with Ubuntu 13.04. The touchpad is recognized as PS/2 mouse out of the box, giving just normal touchpad behaviour, but no tap to click, no scrolling, etc. Most answers related to that issue suggest trying an ALPS driver from dahetral.com: http://www.dahetral.com/public-download For installing I followed the steps on this page: https://www.linuxwind.org/html/dell-touchpad-driver-for-ubuntu-13-04.html Now my xinput looks like this: Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? PS/2 Mouse id=13 [slave pointer (2)] ? ? AlpsPS/2 ALPS GlidePoint id=14 [slave pointer (2)] ? ? Logitech Bluetooth Mouse M555b id=16 [slave pointer (2)] My touchpad isn't working at all now, just the two hardware buttons for left and right mouse buttons work. Interestingly also the tap to click functions works, but only in the address bar of nautilus, nowhere (!) else. What can I do? I would even switch back to initial state, where at least the basic touchpad functionality worked, i I knew, how to get there.

    Read the article

  • Starting out with OpenGL when most tutorials are out of date

    - by AUTO
    I'm sure there are already a bunch of questions like this asked, but the constant updating of the OpenGL library throws them all away, and in a month or two, the answers here will be worthless again. I am ready to start programming in OpenGL using C++. I've got a working compiler (DevCpp; do NOT ask me to switch to VC++, and don't ask me why). Now I'm just looking for a solid tutorial on how to program with OpenGL. My assistant found the tutorial provided by NeHe Productions, but as I've come to find out, it's WAY OUT OF DATE! (although I did pull together a basic window to support an OpenGL canvas) Then I went online, and found the OpenGL SuperBible, which apparently uses freeglut? But what I'd like to know is whether or not SuperBible 5th edition is up to date any longer. The suggestion to freeglut I found said the latest version was 2.6.0 but now it's 2.8.0! Is the OpenGL SuperBible still a good, and fairly up-to-date place to start? Is there a better place to go to learn OpenGL? Am I allowed to simply store freeglut in the DevCpp include directory (maybe in GL), or is there some important procedure? Are there any comments or suggestions that I didn't think to ask since I'm only just beginning? @dreta cleared some things up for me, so now I have a better idea of what to ask: I think I'd like to start out with OpenGL using a wrapper library instead of directly accessing OpenGL.I just think that, for a beginner, it would be easier for me to program and get good results, while I don't yet have to understand all the grimy details (as @stephelton mentioned). The problem is, I can't find any library that doesn't have undefined references to no longer supported functions. Freeglut sounds operational, but it still uses GLU.Does anyone know what I can do?Also, I tried compiling the first SuperBible's source, but I got errors since GLAPI is not being defined as a type, the error originating in the GLU library. I'd like to use the SuperBible, but I don't know how to fix this.

    Read the article

  • Personalisation of the Ubuntu interface

    - by Ben
    It's quite hard to phrase this question as the answer is very subjective and I don't know the right terminology to ask for what I want, but I will try my best. I love linux and would love to use it full-time as my main OS but the one think I have a problem with is the look of it. In my opinion it looks like it was designed for a child and I like my computer to look stylish rather than dated (this is opinion obviously). I like the look of OSX but there are certain things that I don't like, so no, I am not asking the age old question of "how do I make ubunutu look like OSX"...most of the attempts I have seen of this have been pretty poor when put up against the real thing so I just want to take certain things from it. Things I'd like to take from OSX: Spotlight (I don't like the Unity dashboard-esque thingy) Expose Spaces Dock (at the bottom) Icons (apart from the apple one) Look of file manager - its more pleasant to navigate around the file system. Closing an application window doesn't actually quit the program, so when you next launch it - it is instantaneous. Global menu (at the top) What are the latest Ubuntu alternatives to these? When it comes to actually changing the look of Ubuntu what should I be looking at? I know the following exists: Shell theme Icons Fonts ...but is there anything else I need to look into to actually change the look? I hear the term "Window Manager" thrown around, but I don't actually know what that is. What are good sources for reviews/links to the latest and greatest customisation techniques? Ubuntu now comes with Unity which I don't like very much. What are my alternatives? Should I look into Gnome3 or switch to classic desktop which is Gnome2 if I recall correctly? I hope I haven't put too much in one question and that it makes sense. Thanks.

    Read the article

  • Host grub error after installing Virtualbox - Non Recoverable

    - by BiggJJ
    I have been unable to fine a resolution to my problem and I have been suffering from it for a while. I can install Virtualbox and can reboot the machine successfully straight after. Once the system is back up I can run Virtualbox ans start working towards creating a new machine. So, say I am installing an XP machine. 1 time out of 10 it will work successfully first time. If it doesn't work (i.e BSOD), I delete the machine and start again. But when the time comes to finish up and switch off my computer, but it doesn't happen gracefully. As soon as I click shutdown, The machine dies. When the machine is switched back on I get: Error: no such device grub resuce I boot up my Grub Fix Live CD, but the grub reinstaller get stuck on searching for partitions, gparted just get stuck looking for devices and even fdisk -l drops a line and displays nothing and is the same. Stuck. The only way I know how to sort it is by re-installing Ubuntu. Has anyone had this problem, or know how to fix it?

    Read the article

  • Prevent oversteering catastrophe in racing games

    - by jdm
    When playing GTA III on Android I noticed something that has been annoying me in almost every racing game I've played (maybe except Mario Kart): Driving straight ahead is easy, but curves are really hard. When I switch lanes or pass somebody, the car starts swiveling back and forth, and any attempt to correct it makes it only worse. The only thing I can do is to hit the brakes. I think this is some kind of oversteering. What makes it so irritating is that it never happens to me in real life (thank god :-)), so 90% of the games with vehicles inside feel unreal to me (despite probably having really good physics engines). I've talked to a couple of people about this, and it seems either you 'get' racing games, or you don't. With a lot of practice, I did manage to get semi-good at some games (e.g. from the Need for Speed series), by driving very cautiously, braking a lot (and usually getting a cramp in my fingers). What can you do as a game developer to prevent the oversteering resonance catastrophe, and make driving feel right? (For a casual racing game, that doesn't strive for 100% realistic physics) I also wonder what games like Super Mario Kart exactly do differently so that they don't have so much oversteering? I guess one problem is that if you play with a keyboard or a touchscreen (but not wheels and pedals), you only have digital input: gas pressed or not, steering left/right or not, and it's much harder to steer appropriately for a given speed. The other thing is that you probably don't have a good sense of speed, and drive much faster than you would (safely) in reality. From the top of my head, one solution might be to vary the steering response with speed.

    Read the article

  • Incompatible group permissions in Linux - Is it a bug?

    - by Sachin
    I am on Ubuntu 11.04. I am creating another user and placing an existing user in the group of other user, hoping to write in the home directory of other user. # uname -a Linux vini 2.6.38-11-generic #50-Ubuntu SMP Mon Sep 12 21:18:14 UTC 2011 i686 athlon i386 GNU/Linux # whoami sachin # su root # useradd -m -U foo // create user foo # usermod -a -G foo sachin // add user `sachin' to group `foo' # chmod 770 /home/foo/ # exit # whoami sachin # cd /home/foo/ bash: cd: /home/foo/: Permission denied # groups sachin sachin : sachin foo This is totally weird. Though user sachin is in group foo, and group bits for /home/foo/ is set to rwx, sachin can't chdir to /home/foo/. I am not able to understand this. But, if at the exit step, I switch to sachin user from root, this is what happens: # uname -a Linux vini 2.6.38-11-generic #50-Ubuntu SMP Mon Sep 12 21:18:14 UTC 2011 i686 athlon i386 GNU/Linux # whoami sachin # su root # useradd -m -U foo // create user foo # usermod -a -G foo sachin // add user `sachin' to group `foo' # chmod 770 /home/foo/ # su sachin # whoami sachin # cd /home/foo/ # ls examples.desktop Now, whatever is happening here is totally incomprehensible. Does su sachin inherits some permissions from the root user at this step? Any explanations would be much appreciated.

    Read the article

  • Using LINQ to Twitter OAuth with Windows 8

    - by Joe Mayo
    In previous posts, I explained how to use LINQ to Twitter with Windows 8, but the example was a Twitter Search, which didn’t require authentication. Much of the Twitter API requires authentication, so this post will explain how you can perform OAuth authentication with LINQ to Twitter in a Windows 8 Metro-style application. Getting Started I have earlier posts on how to create a Windows 8 app and add pages, so I’ll assume it isn’t necessary to repeat here. One difference is that I’m using Visual Studio 2012 RC and some of the terminology and/or library code might be slightly different.  Here are steps to get started: Create a new Windows metro style app, selecting the Blank App project template. Create a new Basic Page and name it OAuth.xaml.  Note: You’ll receive a prompt window for adding files and you should click Yes because those files are necessary for this demo. Add a new Basic Page named TweetPage.xaml. Open App.xaml.cs and change !rootFrame.Navigate(typeof(MainPage)) to !rootFrame.Navigate(typeof(TweetPage)). Now that the project is set up you’ll see the reason why authentication is required by setting up the TweetPage. Setting Up to Tweet a Status In this section, I’ll show you how to set up the XAML and code-behind for a tweet.  The tweet logic will check to see if the user is authenticated before performing the tweet. To tweet, I put a TextBox and Button on the XAML page. The following code omits most of the page, concentrating primarily on the elements of interest in this post: <StackPanel Grid.Row="1"> <TextBox Name="TweetTextBox" Margin="15" /> <Button Name="TweetButton" Content="Tweet" Click="TweetButton_Click" Margin="15,0" /> </StackPanel> Given the UI above, the user types the message they want to tweet, and taps Tweet. This invokes TweetButton_Click, which checks to see if the user is authenticated.  If the user is not authenticated, the app navigates to the OAuth page.  If they are authenticated, LINQ to Twitter does an UpdateStatus to post the user’s tweet.  Here’s the TweetButton_Click implementation: void TweetButton_Click(object sender, RoutedEventArgs e) { PinAuthorizer auth = null; if (SuspensionManager.SessionState.ContainsKey("Authorizer")) { auth = SuspensionManager.SessionState["Authorizer"] as PinAuthorizer; } if (auth == null || !auth.IsAuthorized) { Frame.Navigate(typeof(OAuthPage)); return; } var twitterCtx = new TwitterContext(auth); Status tweet = twitterCtx.UpdateStatus(TweetTextBox.Text); new MessageDialog(tweet.Text, "Successful Tweet").ShowAsync(); } For authentication, this app uses PinAuthorizer, one of several authorizers available in the LINQ to Twitter library. I’ll explain how PinAuthorizer works in the next section. What’s important here is that LINQ to Twitter needs an authorizer to post a Tweet. The code above checks to see if a valid authorizer is available. To do this, it uses the SuspensionManager class, which is part of the code generated earlier when creating OAuthPage.xaml. The SessionState property is a Dictionary<string, object> and I’m using the Authorizer key to store the PinAuthorizer.  If the user previously authorized during this session, the code reads the PinAuthorizer instance from SessionState and assigns it to the auth variable. If the user is authorized, auth would not be null and IsAuthorized would be true. Otherwise, the app navigates the user to OAuthPage.xaml, which I’ll discuss in more depth in the next section. When the user is authorized, the code passes the authorizer, auth, to the TwitterContext constructor. LINQ to Twitter uses the auth instance to build OAuth signatures for each interaction with Twitter.  You no longer need to write any more code to make this happen. The code above accepts the tweet just posted in the Status instance, tweet, and displays a message with the text to confirm success to the user. You can pull the PinAuthorizer instance from SessionState, instantiate your TwitterContext, and use it as you need. Just remember to make sure you have a valid authorizer, like the code above. As shown earlier, the code navigates to OAuthPage.xaml when a valid authorizer isn’t available. The next section shows how to perform the authorization upon arrival at OAuthPage.xaml. Doing the OAuth Dance This section shows how to authenticate with LINQ to Twitter’s built-in OAuth support. From the user perspective, they must be navigated to the Twitter authentication page, add credentials, be navigated to a Pin number page, and then enter that Pin in the Windows 8 application. The following XAML shows the relevant elements that the user will interact with during this process. <StackPanel Grid.Row="2"> <WebView x:Name="OAuthWebBrowser" HorizontalAlignment="Left" Height="400" Margin="15" VerticalAlignment="Top" Width="700" /> <TextBlock Text="Please perform OAuth process (above), enter Pin (below) when ready, and tap Authenticate:" Margin="15,15,15,5" /> <TextBox Name="PinTextBox" Margin="15,0,15,15" Width="432" HorizontalAlignment="Left" IsEnabled="False" /> <Button Name="AuthenticatePinButton" Content="Authenticate" Margin="15" IsEnabled="False" Click="AuthenticatePinButton_Click" /> </StackPanel> The WebView in the code above is what allows the user to see the Twitter authentication page. The TextBox is for entering the Pin, and the Button invokes code that will take the Pin and allow LINQ to Twitter to complete the authentication process. As you can see, there are several steps to OAuth authentication, but LINQ to Twitter tries to minimize the amount of code you have to write. The two important parts of the code to make this happen are the part that starts the authentication process and the part that completes the authentication process. The following code, from OAuthPage.xaml.cs, shows a couple events that are instrumental in making this process happen: public OAuthPage() { this.InitializeComponent(); this.Loaded += OAuthPage_Loaded; OAuthWebBrowser.LoadCompleted += OAuthWebBrowser_LoadCompleted; } The OAuthWebBrowser_LoadCompleted event handler enables UI controls when the browser is done loading – notice that the TextBox and Button in the previous XAML have their IsEnabled attributes set to False. When the Page.Loaded event is invoked, the OAuthPage_Loaded handler starts the OAuth process, shown here: void OAuthPage_Loaded(object sender, RoutedEventArgs e) { auth = new PinAuthorizer { Credentials = new InMemoryCredentials { ConsumerKey = "", ConsumerSecret = "" }, UseCompression = true, GoToTwitterAuthorization = pageLink => Dispatcher.RunAsync(CoreDispatcherPriority.Normal, () => OAuthWebBrowser.Navigate(new Uri(pageLink, UriKind.Absolute))) }; auth.BeginAuthorize(resp => Dispatcher.RunAsync(CoreDispatcherPriority.Normal, () => { switch (resp.Status) { case TwitterErrorStatus.Success: break; case TwitterErrorStatus.RequestProcessingException: case TwitterErrorStatus.TwitterApiError: new MessageDialog(resp.Error.ToString(), resp.Message).ShowAsync(); break; } })); } The PinAuthorizer, auth, a field of this class instantiated in the code above, assigns keys to the Credentials property. These are credentials that come from registering an application with Twitter, explained in the LINQ to Twitter documentation, Securing Your Applications. Notice how I use Dispatcher.RunAsync to marshal the web browser navigation back onto the UI thread. Internally, LINQ to Twitter invokes the lambda expression assigned to GoToTwitterAuthorization when starting the OAuth process.  In this case, we want the WebView control to navigate to the Twitter authentication page, which is defined with a default URL in LINQ to Twitter and passed to the GoToTwitterAuthorization lambda as pageLink. Then you need to start the authorization process by calling BeginAuthorize. This starts the OAuth dance, running asynchronously.  LINQ to Twitter invokes the callback assigned to the BeginAuthorize parameter, allowing you to take whatever action you need, based on the Status of the response, resp. As mentioned earlier, this is where the user performs the authentication process, enters the Pin, and clicks authenticate. The handler for authenticate completes the process and saves the authorizer for subsequent use by the application, as shown below: void AuthenticatePinButton_Click(object sender, RoutedEventArgs e) { auth.CompleteAuthorize( PinTextBox.Text, completeResp => Dispatcher.RunAsync(CoreDispatcherPriority.Normal, () => { switch (completeResp.Status) { case TwitterErrorStatus.Success: SuspensionManager.SessionState["Authorizer"] = auth; Frame.Navigate(typeof(TweetPage)); break; case TwitterErrorStatus.RequestProcessingException: case TwitterErrorStatus.TwitterApiError: new MessageDialog(completeResp.Error.ToString(), completeResp.Message).ShowAsync(); break; } })); } The PinAuthorizer CompleteAuthorize method takes two parameters: Pin and callback. The Pin is from what the user entered in the TextBox prior to clicking the Authenticate button that invoked this method. The callback handles the response from completing the OAuth process. The completeResp holds information about the results of the operation, indicated by a Status property of type TwitterErrorStatus. On success, the code assigns auth to SessionState. You might remember SessionState from the previous description of TweetPage – this is where the valid authorizer comes from. After saving the authorizer, the code navigates the user back to TweetPage, where they can type in a message, click the Tweet button, and observe that they have successfully tweeted. Summary You’ve seen how to get started with using LINQ to Twitter in a Metro-style application. The generated code contained a SuspensionManager class with way to manage information across multiple pages via its SessionState property. You also saw how LINQ to Twitter performs authorization in two steps of starting the process and completing the process when the user provides a Pin number. Remember to marshal callback thread back onto the UI – you saw earlier how to use Dispatcher.RunAsync to accomplish this. There were a few steps in the process, but LINQ to Twitter did minimize the amount of code you needed to write to make it happen. You can download the MetroOAuthDemo.zip sample on the LINQ to Twitter Samples Page.   @JoeMayo

    Read the article

  • NVIDIA Graphics - resolution problems with new 12.04 LTS installation

    - by Daveisuser56810
    I've been trying to install Ubuntu 12.04 LTS on my desktop most of the day. The desktop uses a NVIDIA GEFORCE 9800 (GT I think) graphics card. I am unable to set the correct resolution (1680 x 1050) for the display. The first problem I had was that of the "Black Screen" during install. I overcame this by utilising the "nomodeset" switch on the install options (once I'd found how to do that). The second problem of course was the "Black screen" following the first reboot. Once again this was overcome by using "nomodeset", this time by "editing" the GRUB. This gave me a resolution of 1280x768 which, the Displays GUI allowed me to change to 1280x720 (appears to fit on screen). I then tried to install the NVIDIA drivers. 1) using additional drivers 2) manually by downloading driver and installing in root As soon as NVIDIA drivers are installed - resolution become restricted to 640x480 (max). At this resolution Ubuntu GUI is not usable as most screens are larger than the display. Removing the NVIDIA driver and removing the XORG.CONF file does not lift this restriction. I have tried most things that I have found and that were vaguely intelligible, but nothing appears to get me closer to a resolution of 1680x1050. UPDATE: reinstalled Ubuntu 12-04 and used the "NoModeSet" in the Grub to restore the resolution to 1280x720, which is at least usable. Will live with this for now.

    Read the article

  • HLSL How to flip geometry horizontally

    - by cubrman
    I want to flip my asymmetric 3d model horizontally in the vertex shader alongside an arbitrary plane parallel to the YZ plane. This should switch everything for the model from the left hand side to the right hand side (like flipping it in Photoshop). Doing it in pixel shader would be a huge computational cost (extra RT, more fullscreen samples...), so it must be done in the vertex shader. Once more: this is NOT reflection, i need to flip THE WHOLE MODEL. I thought I could simply do the following: Turn off culling. Run the following code in the vertex shader: input.Position = mul(input.Position, World); // World[3][0] holds x value of the model's pivot in the World. if (input.Position.x <= World[3][0]) input.Position.x += World[3][0] - input.Position.x; else input.Position.x -= input.Position.x - World[3][0]; ... The model is never drawn. Where am I wrong? I presume that messes up the index buffer. Can something be done about it? P.S. it's INSANELY HARD to format code here. Thanks to Panda I found my problem. SOLUTION: // Do thins before anything else in the vertex shader. Position.x *= -1; // To invert alongside the object's YZ plane.

    Read the article

  • configuring USB modem( Huawei EC156) in ubuntu 13.10

    - by user205427
    I am facing difficulty in installing my USB modem in Ubuntu 13.10. Contrary to what many have suggested,it does not get detected automatically, nor does setting a new connection help. USB Device is listed in lsusb, but not under network manager or Devices, it is detected as a CD-ROM, what I understood from the web was that usb-modeswitch can be used to switch it to a USB device. Even 'Enable Mobile Broadband' option is not shown in network manager. What was interesting is when I start laptop with windows 7 and use the USB modem and after that restart with Ubuntu, both Enable Broadband and the mobile broadband connection can be seen. Sadly, internet connection could not be installed. I tried using USB-modeswitch command as suggested somewhere, but it does not seem to work. Following is the message. Take all parameters from the command line * usb_modeswitch: handle USB devices with multiple modes * Version 2.0.1 (C) Josua Dietze 2013 * Based on libusb1/libusbx ! PLEASE REPORT NEW CONFIGURATIONS ! DefaultVendor= 0x12d1 DefaultProduct= 0x1505 HuaweiMode=1 NeedResponse=0 InquireDevice enabled (default) Look for default devices ... found USB ID 8087:0020 found USB ID 1d6b:0002 found USB ID 0461:4db6 found USB ID 12d1:1505 vendor ID matched product ID matched found USB ID 138a:0007 found USB ID 03f0:231d found USB ID 8087:0020 found USB ID 1d6b:0002 Found devices in default mode (1) Access device 005 on bus 001 Get the current device configuration ... OK, got current device configuration (1) Use interface number 0 Use endpoints 0x08 (out) and 0x87 (in) Inquire device details; driver will be detached ... Looking for active driver ... OK, driver detached INQUIRY message failed (error -9) USB description data (for identification) ------------------------- Manufacturer: HUA?WEI TECHNOLOGIES Product: HUAWEI Mobile Serial No.: ??????????????????? ------------------------- Send old Huawei control message ... -> Run lsusb to note any changes. Bye! I am stuck with this problem for 4 days now, any help would be appreciated

    Read the article

  • Code Behaviour via Unit Tests

    - by Dewald Galjaard
    Normal 0 false false false EN-ZA X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Some four months ago my car started acting up. Symptoms included a sputtering as my car’s computer switched between gears intermittently. Imagine building up speed, then when you reach 80km/h the car magically and mysteriously decide to switch back to third or even second gear. Clearly it was confused! I managed to track down a technician, an expert in his field to help me out. As he fitted his handheld computer to some hidden port under the dash, he started to explain “These cars are quite intelligent, you know. When they sense something is wrong they run in a restrictive program which probably account for how you managed to drive here in the first place...”  I was surprised and thought this was certainly going to be an interesting test drive. The car ran smoothly down the first couple of stretches as the technician ran through routine checks. Then he said “Ok, all looking good. We need to start testing aspects of the gearbox. Inside the gearbox there are a couple of sensors. One of them is a speed sensor which talks to the computer, which in turn will decide which gear to switch to. The restrictive program avoid these sensors altogether and allow the computer to obtain its input from other [non-affected] sources”. Then, as soon as he forced the speed sensor to come back online the symptoms and ill behaviour re-emerged... What an incredible analogy for getting into a discussion on unit testing software? Besides I should probably put my ill fortune to some good use, right? This example provide a lot of insight into how and why we should conduct unit tests when writing code. More importantly, it captures what is easily and unfortunately often the most overlooked goal of writing unit tests by those new to the art and those who oppose it alike - The goal of writing unit tests is to test the behaviour of our code under predefined conditions. Although it is very possible to test the intrinsic workings of each and every component in your code, writing several tests for each method in practise will soon prove to be an exhausting and ultimately fruitless exercise given the certain and ever changing nature of business requirements. Consequently it is true and quite possible whilst conducting proper unit tests, to call any single method several times as you examine and contemplate different scenarios. Let’s write some code to demonstrate what I mean. In my example I make use of the Moq framework and NUnit to create my tests. Truly you can use whatever you’re comfortable with. First we’ll create an ISpeedSensor interface. This is to represent the speed sensor located in the gearbox.  Then we’ll create a Gearbox class which we’ll pass to a constructor when we instantiate an object of type Computer. All three are described below.   ISpeedSensor.cs namespace AutomaticVehicle {     public interface ISpeedSensor     {         int ReportCurrentSpeed();     } }   Gearbox.cs namespace AutomaticVehicle {      public class Gearbox     {         private ISpeedSensor _speedSensor;           public Gearbox( ISpeedSensor gearboxSpeedSensor )         {             _speedSensor = gearboxSpeedSensor;         }         /// <summary>         /// This method obtain it's reading from the speed sensor.         /// </summary>         /// <returns></returns>         public int ReportCurrentSpeed()         {             return _speedSensor.ReportCurrentSpeed();         }     } } Computer.cs namespace AutomaticVehicle {     public class Computer     {         private Gearbox _gearbox;         public Computer( Gearbox gearbox )         {                     }          public int GetCurrentSpeed()         {             return _gearbox.ReportCurrentSpeed( );         }     } } Since this post is about Unit testing, that is exactly what we’ll create next. Create a second project in your solution. I called mine AutomaticVehicleTests and I immediately referenced the respective nunit, moq and AutomaticVehicle dll’s. We’re going to write a test to examine what happens inside the Computer class. ComputerTests.cs namespace AutomaticVehicleTests {     [TestFixture]     public class ComputerTests     {         [Test]         public void Computer_Gearbox_SpeedSensor_DoesThrow()         {             // Mock ISpeedSensor in gearbox             Mock< ISpeedSensor > speedSensor = new Mock< ISpeedSensor >( );             speedSensor.Setup( n => n.ReportCurrentSpeed() ).Throws<Exception>();             Gearbox gearbox = new Gearbox( speedSensor.Object );               // Create Computer instance to test it's behaviour  towards an exception in gearbox             Computer carComputer = new Computer( gearbox );             // For simplicity let’s assume for now the car only travels at 60 km/h.             Assert.AreEqual( 60, carComputer.GetCurrentSpeed( ) );          }     } }   What is happening in this test? We have created a mocked object using the ISpeedsensor interface which we've passed to our Gearbox object. Notice that I created the mocked object using an interface, not the implementation. I’ll talk more about this in future posts but in short I do this to accentuate the fact that I'm not not really concerned with how SpeedSensor work internally at this particular point in time. Next I’ve gone ahead and created a scenario where I’ve declared the speed sensor in Gearbox to be faulty by forcing it to throw an exception should we ask Gearbox to report on its current speed. Sneaky, sneaky. This test is a simulation of how things may behave in the real world. Inevitability things break, whether it’s caused by mechanical failure, some logical error on your part or a fellow developer which didn’t consult the documentation (or the lack thereof ) - whether you’re calling a speed sensor, making a call to a database, calling a web service or just trying to write a file to disk. It’s a scenario I’ve created and this test is about how the code within the Computer instance will behave towards any such error as I’ve depicted. Now, if you’ve followed closely in my final assert method you would have noticed I did something quite unexpected. I might be getting ahead of myself now but I’m testing to see if the value returned is equal to what I expect it to be under perfect conditions – I’m not testing to see if an error has been thrown! Why is that? Well, in short this is TDD. Test Driven Development is about first writing your test to define the result we want, then to go back and change the implementation within your class to obtain the desired output (I need to make sure I can drive back to the repair shop. Remember? ) So let’s go ahead and run our test as is. It’s fails miserably... Good! Let’s go back to our Computer class and make a small change to the GetCurrentSpeed method.   Computer.cs public int GetCurrentSpeed() {   try   {     return _gearbox.ReportCurrentSpeed( );   }   catch   {     RunRestrictiveProgram( );   } }     This is a simple solution, I know, but it does provide a way to allow for different behaviour. You’re more than welcome to provide an implementation for RunRestrictiveProgram should you feel the need to. It's not within the scope of this post or related to the point I'm trying to make. What is important is to notice how the focus has shifted in our approach from how things can break - to how things behave when broken.   Happy coding!

    Read the article

  • http to https upgrade -- SEO troubles

    - by SLIM
    I upgraded my site so that all pages have gone from using http to https. I didn't consider that Google treats https pages differently than http. I re-created my sitemap to so that all links now reflect the new https and let it be for a few days. (Whoops!) Google is now re-indexing all https pages. I have about 19k pages on the site, and Google has already indexed about 8k of the new https. The problem is that Google sees all of these as brand new pages when many of them have a long http history. Of course most of you will recognize the problem, I didn't set up a 301 from the old http to the new https. Is it too late to do this? Should I switch my sitemap back to http and then 301 to the new https? Or should I leave the sitemap as is, and setup 301 redirects anyway.. I'm not even sure if Google is trying to reach the http site anymore. Currently the site is doing 303 redirects (from http to https), although I haven't figured out why yet. Thanks for any suggestions you can offer.

    Read the article

  • Who spotted the omission?

    - by olaf.heimburger
    In my entry OFM 11g: Install OAM 10.1.4.3 (32-bit) on 64-bit RedHat AS 5 I explained how to install OAM 10.1.4.3 (32-bit) on 64-bit RedHat. This is great and works. If you seriously want to use OAM 10.1.4.3 you should consider OHS 11g 32-bit. But this installation is a bit tricky. Nearly all tricks to get this done are described in the above mentioned entry. Today I realized that I missed a small bit to get the installation successfully done.The missing part is within the script to create a vital piece of the OHS 11g package. This part is called genclientsh and resides in $OHS_HOME/bin. This script uses gcc to link binaries. By default this script works great, but on a 64-bit Linux it fails. To get around this, find the variable LD and change the value of gcc to gcc -m32.Done. Caveat On support.oracle.com you will find a Note that suggests to build a small shell script named gcc and includes the -m32 switch. Actually, I consider this as dangerous, because we are humans and tend to forget things quickly. Building a globally available script that changes things for a single setup has side effects that will result in unpredictable results.

    Read the article

  • How to do dependency Injection and conditional object creation based on type?

    - by Pradeep
    I have a service endpoint initialized using DI. It is of the following style. This end point is used across the app. public class CustomerService : ICustomerService { private IValidationService ValidationService { get; set; } private ICustomerRepository Repository { get; set; } public CustomerService(IValidationService validationService,ICustomerRepository repository) { ValidationService = validationService; Repository = repository; } public void Save(CustomerDTO customer) { if (ValidationService.Valid(customer)) Repository.Save(customer); } Now, With the changing requirements, there are going to be different types of customers (Legacy/Regular). The requirement is based on the type of the customer I have to validate and persist the customer in a different way (e.g. if Legacy customer persist to LegacyRepository). The wrong way to do this will be to break DI and do somthing like public void Save(CustomerDTO customer) { if(customer.Type == CustomerTypes.Legacy) { if (LegacyValidationService.Valid(customer)) LegacyRepository.Save(customer); } else { if (ValidationService.Valid(customer)) Repository.Save(customer); } } My options to me seems like DI all possible IValidationService and ICustomerRepository and switch based on type, which seems wrong. The other is to change the service signature to Save(IValidationService validation, ICustomerRepository repository, CustomerDTO customer) which is an invasive change. Break DI. Use the Strategy pattern approach for each type and do something like: validation= CustomerValidationServiceFactory.GetStratedgy(customer.Type); validation.Valid(customer) but now I have a static method which needs to know how to initialize different services. I am sure this is a very common problem, What is the right way to solve this without changing service signatures or breaking DI?

    Read the article

< Previous Page | 372 373 374 375 376 377 378 379 380 381 382 383  | Next Page >