Search Results

Search found 12834 results on 514 pages for 'small wolf'.

Page 377/514 | < Previous Page | 373 374 375 376 377 378 379 380 381 382 383 384  | Next Page >

  • SharePoint extranet security concerns, am I right to be worried?

    - by LukeR
    We are currently running MOSS 2007 internally, and have been doing so for about 12 months with no major issues. There has now been a request from management to provide access from the internet for small groups (initially) which are comprised of members from other Community Organisations like ours. Committees and the like. My first reaction was not joy when presented with this request, however I'd like to make sure the apprehension is warranted. I have read a few docs on TechNet about security hardening with regard to SharePoint, but I'm interested to know what others have done. I've spoken with another organisation who has already implemented something similar, and they have essentially port-forwarded from the internet to their internal production MOSS server. I don't really like the sound of this. Is it adviseable/necessary to run a DMZ type configuration, with a separate web front-end on a contained network segment? Does that even offer me any greater security than their setup? Some of the configurations from a TechNet doc aren't really feasible, given our current network budget. I've already made my concerns known to management, but it appears it will go ahead in some form or another. I'm tempted to run a completely isolated, seperate install just for these types of users. Should I even be concerned about it? Any thoughts, comments would be most welcomed at this point.

    Read the article

  • FTP Server with advanced features

    - by Nikolas Sakic
    Hi, We supply zone-files to our customers. Some zone files are big about 300MB and some are quite small, maybe like 1MB. We had this issue that someone setup a script to continually download the file. Imagine downloading 300MB file a few hundred times a day. Since, we don't have packet-shaper to throttle the traffic, we need to upgrade ftp server and use add-on modules to limit the download somehow. We currently use proftpd server. Also note that there are different users for different domains - say, if you want to download zone file for .INFO domain, then you use a particular user. That user can't download any other zone's file. This is what we are looking for: Have maximum of 400MB download per user per day. Or even have different download limit for different users per day. Have one connection per user at any time. Max # of connection (non-simultaneous) per user per day is 5. Anyone trying to exceed that gets banned for 24 hours. Has anyone used FTP server with similar restrictions above? Does anyone have any ideas where I can start? Any help would be appreciated. Thanks. -N

    Read the article

  • SQL 2008 R2 replication error: The process could not connect to Distributor

    - by Lance Lefebure
    I have two servers running SQL 2008 R2 Standard, each with an instance named "MAIN". I have a small test database on my primary server (one table, 13 rows) that I want to replicate to a second server as a proof-of-concept for some larger databases that I want to replicate. I set up the primary server to be a publisher and distributor, and set the database to do transactional replication. I copied the data to the second server via a backup/restore, not via a snapshot (which I'll have to do with the larger databases due to database size and limited bandwidth). I followed the instructions here: http://gnawgnu.blogspot.com/2009/11/sql-2008-transactional-replication-and.html Now on the subscriber, I go under Replication / Local Subscriptions / Right click / Properties on my subscription to the DB. The status of the last synchronization shows a status of: "The process could not connect to Distributor 'PRIMARYSERVER\MAIN'." Data IS replicating from the primary to the secondary. Any record I add on the primary shows up on the secondary server within seconds. Is the Distributor part of the Snapshot system that I'm not using, or is it part of the transaction replication stuff? Thanks, Lance

    Read the article

  • csvde doesn't import users

    - by The Eighth Ero
    I have a small problem as I'm a server manager beginner, I installed a Domain Controller on my Windows Server 2008, and I created three OUs, now I'm trying to add users to each OU via csvde command, but I get as a result of the operation, without mentioning any errors: > C:\csvde>csvde -i -f List.csv > Connecting to "(null)" > Logging in as current user using SSPI Importing directory from file > "List.csv" Loading entries. > 0 entries modified successfully. Below is the csv file I'm using to add 2 users to "Offshoring1" OU, the domain name is "iado.lan". DN objectClass sAMAccountName sn givenName userPrincipalNAme cn=BB NN,ou=Offshoring1,dc=iado,dc=lan user BB NN BB [email protected] cn=II YY,ou=Offshoring1,dc=iado,dc=lan user II YY II [email protected] and this the csv data as generated by Word 2011 on my mac : DN;objectClass;sAMAccountName;sn;givenName;userPrincipalNAme cn=BB NN,ou=Offshoring1,dc=iado,dc=lan;user;BB;NN;BB;[email protected] cn=II YY,ou=Offshoring1,dc=iado,dc=lan;user;II;YY;II;[email protected] I do use -k option to force import but still no success.

    Read the article

  • Netgear router is not resolving hostnames

    - by Thomas Clayson
    Not sure what the problem is, but I am used to being able to access other clients on my LAN via their hostname. We got a new router from plusnet (Netgear WNR1000v3) and now this has stopped working. For instance, if I were to run a web server from one computer with the hostname TomPC usually I could go into a browser and type http://TomPC and I would get the web server front page. I can access it by using the LAN ip of the machine. e.g. http://192.168.1.1 works fine. I thought it would be a simple option in the admin panel of the router - possibly I had to turn on DNS/DCHP or something. But I can't see anything, and my searches on the internet seem to turn up ridiculous solutions involving setting up a dedicated DNS server on my LAN. This is just a small home network - really I just want to be able to access my Raspberry PI on the network without having to work out the IP address every time. (I know I could just set a static IP address for it, but using its hostname would be much easier). DCHP is enabled in the LAN settings part, although RIP is disabled (I don't know what the latter is) I don't know if this has anything to do with it? Many thanks!

    Read the article

  • Persistent PuTTY sessions for multiple windows

    - by Tgr
    I'm working in various Linux environments through PuTTY connections which break from time to time. I'm looking for a solution to make the PuTTY windows persist (e.g. if I was editing a file, then after reconnecting I should be in the same editor with the same file open at the same place), with the following requirements: it shouldn't require any manual setup at the beginning of the session or after reconnection (I don't want to type in screen or anything like that) I have several windows open to the same machine with the same user, which tend to disconnect at the same time the number/role of windows is not constant (it's not like I have an mc window, a mysql window and a "script runner" window; sometimes I use one window for search or for SVN commands, other times I need several at the same time) sometimes I need to change the properties of the windows for a task (large window for grepping/editing, small windows because I need to see two of them at the same time, red background because I am modifying the live database in MySQL etc), so I need to get the same console back in the same window after a reconnect Is there a way to achieve this? I suppose I should use screen or something equivalent, but how does it know which window I am reconnecting from? Is there some way to pass a unique window identifier to the shell from PuTTY?

    Read the article

  • Undeliverable e-mail message from [email protected]

    - by QGfisher
    I am responsible for IT for a small charity and we have a problem with a few individuals who e-mail us on our hosted e-mail addresses. The individual is on btconnect and our server is also on BT broadband and using MSExchange. I understand that the message from [email protected] are generated by Exchange but can't tell whether this is a problem with our server (seems unlikely as most people send and receive e-mails perfectly well) or with the sender's server. I have copied a sample test message below and would be very grateful if somebody can explain what is causing this problem. I have * the personal details - hope that's acceptable but I don't want to compromise the individual's identity/security. ----- Original Message ----- From: "System Administrator" To: "****" <****.***@btconnect.com Sent: Tuesday, April 06, 2010 3:26 PM Subject: Undeliverable: Test Message Your message To: ***** Subject: Test Message Sent: Tue, 6 Apr 2010 15:25:59 +0100 did not reach the following recipient(s): ***@quiltersguild.org.uk on Tue, 6 Apr 2010 15:26:07 +0100 The e-mail account does not exist at the organization this message was sent to. Check the e-mail address, or contact the recipient directly to find out the correct address.

    Read the article

  • Equivalent of scp -l bandwidth_cap for .ssh/config?

    - by Mark Bennett
    Short form: You can limit the bandwidth the scp uses with the -l switch, you pass a number that's in kbits/sec. I'd rather set this in my .ssh/config file for certain names machines. What's the equivalent named setting for -l ? I haven't been able to find it. Followup question: Generally, not sure how to map back and forth between ssh command line options and config names, short of doing Google searches or manually comparing man pages on a case by case basis. Is there a table that directly equates the two? Longer form of first question, with context: I've started using ssh config quite a bit, especially now that I need to go through a proxy and do lots of port mappings. I even define the same machine more than once depending on what type of tunneling I need. However, when uploading a large file, it's difficult to do anything else on my machine. Even though I have more download bandwidth than up, I think that scp saturates the link so even my small requests can't reach the Internet. There's a fix for this, using the -l bandwidth command line switch for scp. scp -l 1000 bigfile.zip titan: I'd like to use this in my config instead, so I'd create an additional named entry called "titan-upload" and I'd use that as the target whenever I upload. So instead of: scp bigfile.zip titan: I'd say: scp bigfile.zip titan-upload Or even set different caps depending on where I am: scp bigfile.zip titan-upload-from-home vs. scp bigfile.zip titan-upload-from-work I'm generally on Mac and Linux.

    Read the article

  • External SATA drive does not work without the optional USB cable *also* connected

    - by Software Monkey
    I have Vantec NST-260SU external eSATA/USB drive enclosure (which came with an optional separate power supply) connected to a relatively new Windows 7 computer. The drive should work as a SATA drive with either the separate power supply or using a USB cable solely for power. I would prefer to use the external power supply because I have used all my rear USB ports. Now, if I connect both the eSATA and USB cable, then: The drive shows in the BIOS list of AHCI drives (and not in the list of attached USB devices). Everything I can see about it in Computer Management seems to show it as a SATA driver (for example, it shows as "Location 0 (Channel 5, Target 0, Lun 0)" like my other SATA drives (and not "on USB Mass Storage Device" like my USB flash-drives). It seems very fast, very much faster than my USB flash drives. However, if I disconnect the USB cable and attach the power adapter instead, the drive does not show in the BIOS list and cannot be seen by Windows. The power LED on the enclosure is lit, and the drive enclosure becomes warm after running for a bit, so I am sure it is receiving power. Does anyone know if this device requires both the USB and eSATA cable, and if so, why? Or is there possibly something I need to do to reset the enclosure to not need the USB - the install instructions are pretty clear that you must connect the SATA cable before connecting the USB cable in order for the drive to function as SATA, which I am sure I did. PS: I have reviewed the small manual which came with it, which has not been of help.

    Read the article

  • Time Machine vs Source Control?

    - by Blub
    Finally got convinced to start using some kind of version control for my code instead of zipping down a copy of the project at the end of each day. Downloaded Tortoise SVN and used it to create a repository localy on my hdd. I've been using it for 2 days now but I have to say that using it is actually more hassle than just copying the project manually in explorer. Sure, you only store incremental changes but with the cheap disks of today I can't really say that's an argument when you only have small projects. I haven't realy found a quick way to browse the older versions of my files eighter. What I want is an infinite undo that is completely transparent while I code, if I save the file I want a backup. I don't want to check out, check in and don't even get me started on moving files. I haven't tried Time Machine for OS X but it looks like it's exactly what I'm looking for. Does such a program exist for windows? Preferably free and with some kind of tagging-system so I can tag a timestamp when the project is working etc. Maybe should add that I mostly work alone on a single computer. Update: Some of you asked why I want backup. Since I work alone it's mostly to allow me to quickly hack up a solution without worrying that something will screw up.

    Read the article

  • Trouble connecting to a local SQL server instance from the web

    - by dfarney
    We have a small network behind a firewall (WatchGuard XTM 2 series) and network switch. On our network we have multiple instances of SQL server, but 1 in specific that I would like to be able to access remotely from our website. We have a static IP address from our ISP and then all the machines on the network have a locally assigned dynamic IP address. When trying to connect to the database from outside our network how do I get the request to be directed to the proper machine / SQL instance? Is it a parameter in my connection string or something in my firewall? A few things to rule out: 1) The firewall is allowing access from the website to our network. I added the site's IP and opened up port 1433. Also, when trying to connect and monitoring the firewall no exceptions come up as they did before I added the proper IP address. 2) Remote connections on the SQL server has been setup and enabled. I've done a lot of reading up on remote connections and I am sure it has been setup properly. I am currently getting this error message on my site: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.)

    Read the article

  • Linux: CIFS/Samba mount hangs for several minutes

    - by Pistos
    I have a small local network which has a Gentoo box and a Windows box. I mount a share originating on the Windows box onto the Gentoo box with a command like: mount -t cifs -o username=WindowsUsername,password=thepassword,uid=pistos //192.168.0.103/Users /mnt/windowsbox Most of the time, everything Just Works, and I can read and write without problems. However, every few weeks or so, the connection or the mount point seems to go dead or hang, such that any process that tries to access the mount point gets stuck in D state (disk, or I/O wait). These processes become impervious to TERM and KILL signals. Disconnecting and reconnecting the Windows box from the network does not help. The frozen state lasts for 5+ minutes. It's really frustrating and gets in the way of normal work, because it freezes Save As dialogues, ls commands, etc. If I issue a umount on the mount point, it either hangs also, or reports that the mount point is in use. Eventually, the dead state resolves itself, and the mount point gets unmounted, or it becomes possible to umount with no delay. My guess is that this happens when the connection/mount has gone idle, or when the Windows machine has been idle. I am not really sure. Why is this happening, and what can I do to prevent it? Or how can I successfully kill these D-state processes at will? Possibly related: CIFS mounts hang on read

    Read the article

  • Windows Server 2012 Can't Print

    - by Chris
    I know this may sound incredibly stupid and there is probably an easy solution but I can't seem to find it. Friends of mine recently upgraded their server for their small business from the POS old one. New hardware and a change from Windows Server 2003 to Windows Server 2012. I've got everything they need transfered over and running except for printing. They need to be able to print to printers in the vans their technicians use from the server via remote desktop. In other words the use a laptop to remote desktop into the server and need to print invoices out from the remote server to printers attached locally via usb. On the old server they just installed the identical driver and that was it, they could print as needed. On this server no matter what we seem to do we can't get it to print remotely, and in the process we also discovered that the server can't even print to the network printer. It sees the printer on it's network and it sees (through redirect) the printers in the vans but when you hit print it claims it did and nothing happens. There isn't an issue with the printers themselves as every other device we have can print to them without issues. Is there some setting that is inhibiting the server from printing? Is there something I need to install (print server?) to add the functionality? Thanks in advance for helping me out here

    Read the article

  • Could hybrid SSD + HDD be made with fixed internal partitions?

    - by Aaron
    I was pretty close to getting Seagate's Momentus XT but have been scared off by the many problems reported on forums and feedback sites, especially in Mac Book Pros. So I'm waiting for mk 2 with some extra flash and better reliablilty I'm assuming will come out this year. What would suit me better though is a 32+500 hybrid drive where I have more control over what is on the flash drive and what is on the disk drive. So there are 2 physical partitions within the one 2.5" hard drive enclosure which use different media internally (32GB for core files and 500GB for data and multimedia). The partitions would be locked so they can't be changed. - Or even better, the disk driver just makes them appear as two disks to the OS that share the same bus... Perhaps it's ok if the bios just sees the first drive until the OS is loaded. Is either of it technically possible? Obviously difficult to market outside of the enthusiast market. The SSD memory modules can be pretty small right, so they could even make them a card that plugs into a secondary connection on the enclosure. That would be good for computer builders as well as for upgrading and recoverability. Then future operating systems could recognise these system SSD drives and automatically install the OS + swap files on it. While placing document libraries on the larger data drive. While in the longer term HDD will probably disapear there will always be a trade off between speed, storage size and expense.

    Read the article

  • Using Different Networks with Different Proxy Servers on Windows 7

    - by John
    Hi, I have a laptop running Windows 7 Professional. There are two wireless networks I connect to every day: Home: no proxy server Work: proxy server with authentication On my iPad and iPhone, I've got two WiFi network profiles (one for home, one for work). The work one has the proxy server settings specified. The home one has no proxy specified. It all works great and I don't need to go changing settings around whenever I move from home to work or vice versa. On my laptop, however, I can't seem to get this going. I can certainly connect to both networks, but when I'm at work I have to go and change the proxy settings (in Internet Options) to be able to use the network. When I'm at home, I have to then go and turn them off. It's a small thing, but considering this is something I have to do every day, it's a bit annoying. Is there any way I can make Windows automatically switch proxy settings on or off based on the network I'm connected to? Thanks, John

    Read the article

  • Imagemagick convert with resample option

    - by coneybeare
    I am creating thumbnails from much larger images and have been using this command successfully for some time: convert FILE -resize "64x" -crop "64x64+0+16" +repage -strip OUTFILE I also do some other processing that is not relevant to the question. I realized that this does not adjust the resolution at all, so if I use a 300dpi image, it ends up displaying really small on some devices. I want to resample it to 72x72 so I have been trying with this command: convert FILE -resize "64x" -crop "64x64+0+16" +repage -strip -resample 72x72 OUTFILE And expected the 64x64 image at 300dpi to be resampled to a 64x64 image at 72dpi, but instead, I am getting a very funny size and density. Here is "identify" output for the original and post-processed file WITHOUT the resample: coneybeare $ convert "aa.jpg" -crop "64x64+0+16" +repage -strip "aa.png" coneybeare $ for image in `find . -type f`; do identify $image; identify -verbose $image | egrep "^ Resolution"; done ./aa.jpg JPEG 1130x1695 1130x1695+0+0 8-bit DirectClass 1.492MiB 0.000u 0:00.000 Resolution: 300x300 ./aa.png PNG 64x64 64x64+0+0 8-bit DirectClass 7.46KiB 0.000u 0:00.000 Resolution: 118.11x118.11 And here is the "identify output for the command WITH the resample: coneybeare $ convert "aa.jpg" -crop "64x64+0+16" +repage -strip -resample 72x72 "aa.png" coneybeare $ for image in `find . -type f`; do identify $image; identify -verbose $image | egrep "^ Resolution"; done ./aa.jpg JPEG 1130x1695 1130x1695+0+0 8-bit DirectClass 1.492MiB 0.000u 0:00.000 Resolution: 300x300 ./aa.png PNG 15x15 15x15+0+0 8-bit DirectClass 901b 0.000u 0:00.000 Resolution: 28.34x28.34 So, the question is: What am I doing wrong and how can I fix it so the end result is a 64x64 cropped thumbnail image at 72dpi?

    Read the article

  • Measure Upload Speed between a client and our server

    - by tresstylez
    We host a SAAS application specially customized for multiple clients. For one customer in particular -- they are reporting sporadic performance issues from various locations on their network, in particular UPLOADING documents through a form on our website. The client claims they have "bandwidth to spare" and that utilization of their "pipe" is so low that it MUST be our application, but our application has MANY clients and all features are working fine for all other clients. Interestingly enough -- DOWNLOADS (ie. just accessing the website, or downloading documents) is working fine. Speed test shows that they should get 1.2Mbps UP. So, a 3MB file should take 20 secs to upload. It takes 60+ seconds on their network. Sometimes even small files take OVER 10 minutes to upload or they timeout. Pings and Traceroutes don't show any abnormally long hops or response times. They claim other SAAS applications they use allow them to upload just fine. Both IT teams are working together to resolve this issue. What kind of data can I request from the clients to begin ruling things out. Seems like we need to somehow measure LATENCY of the networks involved or even at the switch level, we need to understand if packets are getting dropped somewhere and why. Where should I start? Any help is appreciated. I'll provide more info upon requests

    Read the article

  • Recommended offline on-demand virus scanners

    - by ashh
    I have never run full anti-virus on my Windows XP systems. Instead I use various anti-malware tools to manually perform scans every few weeks. This approach, combined with Windows updates and general care about what web-sites I visit and what files I download has kept me 99% free of problems. The remaining 1% has occurred when I download files that I know may contain malware, but still decide the risk is worth it. When on 2 occasions in 10 years I did get caught doing this, I realised that being able to easily scan them would most likely have avoided getting infected. I don't need, or want, to run a "stay resident" anti-virus. Also, the online scanners such as Kaspersky etc limit uploads to small files, so these are not always useful. In summary I would like to simply be able to download a file and then manually initiate an on demand anti-virus scan, on the downloaded file only. I'm sure some/most Anti-Virus do both, however once again I don't really want to pay for or need the stay resident part. Any recommendations (commercial or free)? UPDATE: This is not an exact duplicate, nor a possible duplicate. I searched for and read other questions on anti-virus here at SuperUser and found none that answered my question. I am specifically asking about anti-virus scanners that run ON-DEMAND locally on the computer, not online scanners.

    Read the article

  • Large, high performance object or key/value store for HTTP serving on Linux

    - by Tommy
    I have a service that serves images to end users at a very high rate using plain HTTP. The images vary between 4 and 64kbytes, and there are 1.300.000.000 of them in total. The dataset is about 30TiB in size and changes (new objects, updates, deletes) make out less than 1% of the requests. The number of requests pr. second vary from 240 to 9000 and is dispersed pretty much all over, with few objects being especially "hot". As of now, these images are files on a ext3 filesystem distributed read only across a large amount of mid range servers. This poses several problems: Using a fileysystem is very inefficient since the metadata size is large, the inode/dentry cache is volatile on linux and some daemons tend to stat()/readdir() it's way through the directory structure, which in my case becomes very expensive. Updating the dataset is very time consuming and requires remounting between set A and B. The only reasonable handling is operating on the block device for backup, copying, etc. What I would like is a deamon that: speaks HTTP (get, put, delete and perhaps update) stores data it in an efficient structure. The index should remain in memory, and considering the amount of objects, the overhead must be small. The software should be able to handle massive connections with slow (if any) time needed to ramp up. Index should be read in memory at startup. Statistics would be nice, but not mandatory. I have experimented a bit with riak, redis, mongodb, kyoto and varnish with persistent storage, but I haven't had the chance to dig in really deep yet.

    Read the article

  • What was your biggest waste of money, and what should you have bought instead? [closed]

    - by rob
    I waste a lot of money on computer equipment and other electronics that I don't really need. I've also bought software that I've never really used, or which as been replaced by better free software. As I'm buying things, it doesn't seem like much--fifty bucks here, a hundred dollars there. But when I go back and look at how much I've spent over my past few electronics purchases, I usually start to think of the other things I could have bought with that money instead. Most of the computer hardware and electronics don't usually improve my life by much, if at all. Case in point: back when I was in college, I prided myself on getting the best deals for computer hardware, but when I went back and added up all the money I had spent, I had probably wasted close to a thousand dollars on "cheap" $100 hard drives that eventually all went bad (including the warranty replacements). Even if they did still work, it would not be worth the effort to use them, because they're too small and too noisy by today's standards. I've also spent thousands more on other junk, such as RAM and CPU upgrades that only gave modest performance jumps, and wireless audio transmitters that I used for a short time to stream music from the now-defunct Yahoo! Music service. Every time I see a really great deal on RAM or video cards, I come one click away from buying them, but these days I'm usually able to resist. I've been wanting to get into woodworking ever since I moved into my house, and five years later I'm finally saving up for a $600 table saw. Sure, I've already got a toolbox and a couple of the essential power tools like a drill and a jigsaw, but I can't help but think that I'd have an entire shop full of woodworking tools and a lot of nice wood furniture if I hadn't wasted all that money back in college. What has been your biggest waste of money on computer stuff and technology? If you had all that money back, would you make the same mistake again and buy the same types of things, or would you spend it on something else?

    Read the article

  • Windows Server Connected to Domain Without Being Domain Controller

    - by saluce
    Can a Windows Server be connected to an Active Directory domain without being a domain controller? Here's the scenario: I want to use Windows Server 2012 to run several virtual machines for testing our web application in a variety of environments. We have a corporate domain, and I'd like to use the corporate login (or at least a common login) on each of the virtual machines without necessarily having to get IT to set up each virtual machine on the corporate domain. Also, I need the server itself to be able to authenticate domain logins (the app uses domain login information for users to login). However, I absolutely do NOT want it to be a DC on the corporate network. Thus, my questions: Can a Windows Server be connected to an Active Directory domain without being a DC? Can a Windows Server authenticate users on another domain without being a part of that domain? Can a Windows Server be a domain controller in a small network (comprised of just the server and itself) and use the corporate domain's Active Directory for authenticating user logins to the server, the web app, and the virtual machines?

    Read the article

  • Configuration of Server root email - Change Address and Name on outgoing email

    - by JTWOOD
    As a newbie Postfix user, I've gotten so far and now I am stuck with a SMALL problem. I would like to configure my local network servers to send alerts and like using the following: 1) From address: [email protected] 2) From name: Hostname I can get #1 to work fine using smtp_generic_maps The problem is that on my email client, the name is listed as "root" - as in the header shows the following: Date: Sun, 29 Jul 2012 13:21:01 -0400 (EDT) From: [email protected] (root) To: undisclosed-recipients:; I'd like to change it to "From: [email protected] (Zeus)" I imagine that this can be done in the headers_check, but so far I haven't gotten anything to work and before I waste a ton of time trying to get this to work, I'd like to make sure I am on the right track. My aliasing and genericmaps are set up correctly (As far as I can see and know - the results are correct!). I just want to change that last bit in the From field to reflect the hostname. I would also like to add something in the subject of the outgoing messages for easy filtering - something like Subject: [Zeus.domain] - "Original Subject" Any suggestions are much appreciated. Thanks!

    Read the article

  • Can I use @import to import Kod's default style sheet into my own?

    - by Thomas Upton
    I understand that Kod is being actively developed and is prone to drastic changes in any area. I would like to modify some small things (like font face and size or certain colors) while still being able to benefit from any changes or updates to the default Kod stylesheet. I thought that I would be able to @import the default stylesheet into my own to achieve this. This is what ~/.kod/custom.css would look like, @import url("file:///Applications/Kod.app/Contents/Resources/style/default.css"); /* Change the default font face and color. */ body { font-family: Menlo, monospace; color: #efefef; } This stylesheet was set with the following defaults command, per the comments at the top of Kod's default CSS file: defaults write se.hunch.kod style/url ~/.kod/custom.css Unfortunately, this didn't work. When I first tried to reload the style, Kod crashed. It opened fine again, but the @import statement wasn't working, and Kod crashed every time I saved the custom.css file. Am I doing something wrong? Did I write my @import statement wrong? Is that not how @import is supposed to work? Did I miss some sort of documentation or Kod Google Groups post that mentions that Kod explicitly disallows this?

    Read the article

  • Replacing HD in an MacOS 10.6.8 server caused all shares to fail

    - by Cheesus
    I'm hoping someone might have a helpful suggestion about this problem. We have 2 MacOSX servers available for file sharing. (quad Xeons - 2GB RAM, both 10.6.8), No.1 is an Open Directory Master with 50+ user accounts, No.2 has only 2 local accounts (/local/Default) and looks at the OD Master for all user accounts (/LDAPv3/10.x.x.20/) Both servers have 3 internal HD's, The boot volume with only Server OS and minimal Apps. A 'DataShare' HD (500GB) and a backup drive (500GB). After upgrading the DataShare HD in Server No.2 from a small internal HD (500GB) to larger capacity (2TB) drive, users are unable to connect to shares on Server No.2. Users get an error "There are no shares available or you are not allowed to access them on the server" The process I followed was to use Carbon Copy Cloner to create an exact copy of the original data drive (keeps all ownership data, UID, permissions, last edit date and time). Everything booted up ok, no indication there was any issues. (Paths to the sharepoint look good) Notes during troubleshooting - Server1 is operating perfectly, all users can access shares and authenticate etc. - I've checked the SACL (Server Access Control List) settings is ok. - On Server2 in the Server Admin' app, I can see all the shares listed ok. The paths seem valid, I can disable / reenable the shares, no errors. - On Server2 'workgroup manager' lists all the accounts from the OD Master in the LDAP dir view. All seems fine from here. Basically everything looks normal but no file shares on Server2 can be accessed from regular users.

    Read the article

  • Logitech Performance MX Mouse Jumps on OS X Lion (10.7.4)

    - by Adam Thompson
    I have a Logitech MX Revolution wireless mouse that I am trying to use with OS X Lion. Everything is working except for one problem... there is a small, but quite noticeable, jump when the mouse cursor is moved. The problem is mostly prevalent when dragging and dropping files or trying to highlight items. It makes performing any task with the mouse accurately next to impossible. I did quite a bit of looking and found that all kinds of people have had mouse issues with OS X. I've tried all of the following with absolutely no success: Using the official drivers from Logitech (these performed worse than the default mouse drivers in OS X) Using SteerMouse as a third party mouse driver. This worked ever so slightly better than the default driver, but still suffered quite frequently from the skipping problem Cleaning the sensor on the mouse and ensuring it's not the result of the surface that it's being used on. Tested the mouse on a Windows machine. The mouse worked absolutely flawlessly on the other machine. Changed the channel that my wireless router operates on by the off chance my problems were the result of interference. This also had no effect. I can't think of anything else that could possibly interfere with the mouse. I'm am out of ideas on what to try, so I would really appreciate if anyone has any suggestions. I should also mention that an old wired mouse I had laying around worked just fine when I plugged it in. This really isn't the best solution, however, as I really prefer the MX Revolution.

    Read the article

< Previous Page | 373 374 375 376 377 378 379 380 381 382 383 384  | Next Page >