Search Results

Search found 2844 results on 114 pages for 'daniel martin'.

Page 38/114 | < Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >

  • Dangers of Running Computers w/o Air Conditioning

    - by Daniel Bingham
    I recently moved in to an apartment with out air conditioning. This is fine most of the time as I am in upstate New York. It only ever gets above the high 70s during the hottest of the summer months. And when it does, I'm stubborn enough that I'll just deal with wearing minimal clothing around the house. However, I'm worried about my computers. I'm a software developer and gamer, so many of my machines are very high powered. And at least one of them is a server that must be left on 24/7 (not just a game server - also serves multiple websites). I've never before had to worry about the heat too much, as I always lived in buildings with central air. The in building temperature rarely got much above 70 F. All of the machines I built had good enough air cooling that I never saw a problem. Now the temperature in building is pushing 100F and I'm worried that the machines will not be able to keep themselves cool enough by simply blowing already hot air over themselves. The hottest of them I've turned off. However, the server I cannot. It's an old Dell (not custom build) that runs on a Pentium 4 (2.2GHz). It only has a single hard drive, integrated video. And it'd not running any processor intensive servers. Just basic LAMP. It used to run a MUD server, but that's off for now. So it should be idling most of the time. I haven't been able to find any sort of built in temperature sensors in the hardware... at least not any that the programs I've found in the Debian repository can read. And it's an inherited machine to which I do not have the full specs, so I don't know the tolerances anyway. How worried should I be about it melting down on me? How worried should I be about the hard drive melting or becoming corrupted? To generalize the question for other people, what are the safe temperature tolerances for most machines. How widely does it vary, and how does one go about determining when their machine is running too hot and needs to be shut down?

    Read the article

  • Sorting by Folder and Received in Outlook 2010

    - by Simon Martin
    I want to sort my Unread Mail folder by Folder and within that by Recieved (oldest on top). I've found that by clicking the "In Folder" header, holding down Shift and clicking Received twice I can get the sort I want but if I leave that view (for example checking the calendar) and then return that the sort order has not kept things as I expect. Looking in the View Settings Sort it shows "In Folder (ascending), Received (ascending)" but that doesn't create the same view as using the shift button...

    Read the article

  • Ubuntu server: Delete first folder in directory

    - by Martin
    How can I grab the first subfolder in a directory and delete it? I found a script to monitor the free diskspace. It sends an alert email if space runs low, but I want to also delete some unneeded stuff. I have a backup folder where I save daily and monthly backups. I want to delete the first folder since this always the oldest, but I don't know the name of the oldest backup. My folders without Jan-May and Dec: 06-01 07-01 08-01 09-01 10-01 11-01 Friday Monday Saturday Sunday Thursday Tuesday Wednesday How can I delete the first folder "06-01" without knowing its name?

    Read the article

  • Run QuickTime from command line to export video

    - by Daniel Huckstep
    I have a bunch of avi's I am converting to m4v, and I can do this in QuickTime by opening the video and then go 'Save As', select a folder, select the type (iPhone, Movie, etc), blah blah blah. But I have around 100 videos I want to do this with. Command line options? Or batch processing options in the GUI? Enlighten me, please. This is QuickTime X on Snow Leopard.

    Read the article

  • Copying single files into a folder that changes name every time the batch file is executed

    - by Daniel Jochem
    Can you please help, I am using this to put the text files made by the batch file into the folder created by the batch file as well. but my problem is that the name is changed of the new folder every time because it is named by the date and time it was created. This is the code: @echo off for /F " tokens=1,2,3* delims=/, " %%i IN ('date /T') DO ( set CUR_DAY_OF_WEEK=%%i set CUR_MONTH=%%j set CUR_DAY=%%k set CUR_YEAR=%%l) for /F " tokens=1,2,3* delims=:, " %%i IN ('time /T') DO ( set CUR_HOUR=%%i set CUR_MIN=%%j set AM_PM=%%k) if not exist E:\Private goto :F cd E:\Private md "E:\Private\%CUR_HOUR%.%CUR_MIN%%AM_PM% %j%%CUR_MONTH%-%CUR_DAY%-%CUR_YEAR%" goto :start :F if not exist F:\Private goto :G cd F:\Private md "F:\Private\%CUR_HOUR%.%CUR_MIN%%AM_PM% %j%%CUR_MONTH%-%CUR_DAY%-%CUR_YEAR%" goto :start :G cd G:\Private md "G:\Private\%CUR_HOUR%.%CUR_MIN%%AM_PM% %j%%CUR_MONTH%-%CUR_DAY%-%CUR_YEAR%" goto :start :start start /min A /stext A.txt start /min B /stext B.txt start /min C /stext C.txt start /min D /stext D.txt (As the directory (E:-G:) changes, how can I check all without an error? And once that is found, then put all these text files into the date folder.

    Read the article

  • How to Eliminate Tape Backup and Off-site Storage Service?

    - by Daniel Lucas
    PLEASE READ UPDATE AT THE BOTTOM. THANKS! ;) Environment Info (all Windows): 2 sites 30 servers site #1 (3TB of backup data) 5 servers site #2 (1TB of backup data) MPLS backbone tunnel connecting site #1 and site #2 Current Backup Process: Online Backup (disk-to-disk) Site #1 has a server running Symantec Backup Exec 12.5 with four 1TB USB 2.0 disks. BE jobs for full backups run nightly on all servers in site #1 to these disks. Site #2 backs up to a central file server there using software they already had when we purchased them. A BE job pulls that data nightly to site #1 and stores them on said disks. Off-site Backup (tape) Connected to our backup server is a tape drive. BE backs up the external disks to tape once a week which gets picked up by our off-site storage company. Obviously we rotate two tape libraries, one is always here and one is always there. Requirements: Eliminate the need for tape and off-site storage service by doing disk-to-disk at each site and replicating site #1 to site #2 and vice versa. Software based solution as hardware options have been too pricey (ie, SonicWall, Arkeia). Agents for Exchange, SharePoint, and SQL. Some Ideas So Far: Storage DroboPro at each site with an initial 8TB of storage (these are expandable up to 16TB at present). I like these because they are rackmountable, allow disparate drives, and have iSCSI interfaces. They are relatively cheap too. Software Symantec Backup Exec 12.5 already has all the agents and licenses we need. I'd like to keep using it unless there is a better solution, similarly priced, that does everything BE does plus deduplication and replication. Server Because there is no more need for a SCSI adapter (for tape drive) we are going to virtualize our backup server as it is currently the only physical machine save for SQL boxes. Problems: When replicating between sites we want as little data as possible to go across the pipe. There is no deduplication or compression in what I have laid out here so far. The files being replicated are BE's virtual tape libraries from our disk-to-disk backup. Because of this each of those huge files will go across the wire every week because they change every day. And Finally, the Question: Is there any software out there that does deduplication, or at least compression, to handle just our site-to-site replication? Or, looking at our setup, is there any other solution that I am missing that might be cheaper, faster, better? Thanks. Sorry so long. UPDATE 2: I've set a bounty on this question to get it more attention. I'm looking for software that will handle replication of data between two sites using the least amount of data possible (either compression, deduplication, or some other method). Something similar to rsync would work but it needs to be native to Windows and not a port involving shenanigans to get up and running. Prefer a GUI based product and I don't mind shelling out a few bones if it works. Please, answers that meet the above criteria only. If you don't think one exists or if you think I'm being to restrictive keep it to yourself. If after seven days there is no answer at all, so be it. Thanks again everyone. UPDATE 2: I really appreciate everyone coming forward with suggestions. There is no way for me to try all of these before the bounty expires. For now I'm going to let this bounty run out and whoever has the most votes will get the 100 rep points. Thanks again!

    Read the article

  • Will Vimperator always be this awesome?

    - by Martín Fixman
    About a week ago I started using Vim, and fell completely in love with it. However, today I installed the Vimperator extension on Firefox, and through there are some problems (all of which will be solved after using it until I get used to it), I found it great. However, I'm still in the "Holy fuck this is totally awesome" phase of software testing, and in some time will go back to the "I have this thing" phase. Just to be sure, will it be a good idea to use it regularly? I want to hear experiences about users and ex-users.

    Read the article

  • How can I rebuild the index in Thunderbird 3.0?

    - by Martin
    Hello, I have just deleted a lot of old messages (about 3,000) from my Thunderbird 3.0 profile. When I now use the new search feature (search all messages), TB still finds the deleted ones. I deleted them this way: I moved the messages to an own "archive" folder (not the built-in archive feature). Then I stopped TB and moved the archive files and folders to a different place on my file system. Then restarted TB. I archive my messages this way for years now. So, it seems that Thunderbird does not notice the deletion of my messages, thus the index is not updated. How can I tell TB to instantly rebuild the index?

    Read the article

  • Stripping Non-Text from a Scanned, OCRd PDF

    - by Daniel S.
    I have a PDF created from a scanned document. OCR was used to recognize text. In Acrobat, if I select text, and click 'copy with formatting', I can paste the formatted text into Word, so it seems that fonts and colors are also embedded in the document in addition to just plain text and possibly the size. Is there any way to use this information to create a PDF that just contains the formatted OCRd text, without the scanned image. Currently, my document only shows the scanned image, and the text is on an invisible layer. I would like to create a PDF document that removes the image that was scanned, and displays the formatted text that is currently hidden. The following post has a section on "How can we make the invisible text visible?" PDF has an extra blank in all words after running through Ghostscript However, doing this does not show the correct text formatting (that is retained when pasting in Word), and I also would like to remove the scanned image so that the final PDF just contains formatted (color, font, size) vector fonts, and no images.

    Read the article

  • Raid1 with active and spare partition

    - by Daniel Baron
    I am having the following problem with a RAID1 software raid partition on my Ubuntu system (10.04 LTS, 2.6.32-24-server in case it matters). One of my disks (sdb5) reported I/O errors and was therefore marked faulty in the array. The array was then degraded with one active device. Hence, I replaced the harddisk, cloned the partition table and added all new partitions to my raid arrays. After syncing all partitions ended up fine, having 2 active devices - except one of them. The partition which reported the faulty disk before, however, did not include the new partition as an active device but as a spare disk: md3 : active raid1 sdb5[2] sda5[1] 4881344 blocks [2/1] [_U] A detailed look reveals: root@server:~# mdadm --detail /dev/md3 [...] Number Major Minor RaidDevice State 2 8 21 0 spare rebuilding /dev/sdb5 1 8 5 1 active sync /dev/sda5 So here is the question: How do I tell my raid to turn the spare disk into an active one? And why has it been added as a spare device? Recreating or reassembling the array is not an option, because it is my root partition. And I can not find any hints to that subject in the Software Raid HOWTO. Any help would be appreciated. Current Solution I found a solution to my problem, but I am not sure that this is the actual way to do it. Having a closer look at my raid I found that sdb5 was always listed as a spare device: mdadm --examine /dev/sdb5 [...] Number Major Minor RaidDevice State this 2 8 21 2 spare /dev/sdb5 0 0 0 0 0 removed 1 1 8 5 1 active sync /dev/sda5 2 2 8 21 2 spare /dev/sdb5 so readding the device sdb5 to the array md3 always ended up in adding the device as a spare. Finally I just recreated the array mdadm --create /dev/md3 --level=1 -n2 -x0 /dev/sda5 /dev/sdb5 which worked. But the question remains open for me: Is there a better way to manipulate the summaries in the superblock and to tell the array to turn sdb5 from a spare disk to an active disk? I am still curious for an answer.

    Read the article

  • Is VGA port hot-pluggable?

    - by Martin Bøgelund
    In meetings, I often see people detaching the VGA connector from one running laptop and connecting it to another, while the projector is still on. Is this 100% risk free, and OK by design of the VGA standard? If there's a risk involved in hot-plugging VGA, can it be removed by turning off or suspending either laptop, display, or both? I see this being done all the time without causing disaster, so clearly I'm not interested in answers stating "we do it all the time, so it should be OK!". I want to know if there's a risk - real or in theory - that something breaks when doing this. EDIT: I did an internet search on the topic, and I never found a clear statement as to why it is safe or unsafe to hot swap VGA devices. The typical form is a forum question asking basically the same question as I did, and the following types of statements Yes it's hot swappable! I do it all the time! It involves some kind of risk, so don't do it! You're some kind of moron if you think there's a risk, so just do it! But no explanation as to why it safe or not... Joe Taylors answer below contains a link to a forum post and answers that basically give me the same statements as mentioned above. But again, no good explanation why. So I looked for an actual manual for a projector, and found "Lenovo C500 Projector User’s Guide". It states on page 3-1: Connecting devices Computers and video devices can be connected to the projector at the same time. Check the user’s manual of the connecting device to confirm that it has the appropriate output connector. [image] Attention: As a safety precaution, disconnect all power to the projector and devices before making connections. But again, no good explanation.

    Read the article

  • Home-made HTTP proxy server [closed]

    - by Martin Dimitrov
    I wanted to help a friend who has some restrictions at work to visit certain sites. Locally, on a Windows 7 machine, I run Apache server and decided to make it a proxy just for the IP of my friend. So I added the following to the configuration file: ProxyRequests On ProxyVia On <Proxy *> Order deny,allow Deny from all Allow from <his.ip> </Proxy> It worked fine. But shortly the proxy started to receive many requests of the form: 66.249.66.242 - - [22/Sep/2012:11:01:12 +0300] "GET /search?hl=en&lr=lang_en&as_qdr=all&ie=UTF-8&q=related:www.aarp.org/aarp-foundation/+allinurl:+foundation&tbo=1&sa=X&ei=BSy2T9L_L8PitQapwtHtBw&ved=0COQBEB8wPw HTTP/1.1" 403 208 66.249.71.36 - - [22/Sep/2012:11:01:49 +0300] "GET /search?hl=en&lr=lang_en&as_qdr=all&ie=UTF-8&q=related:www.aarp.org/aarp-foundation/+allinurl:+foundation&tbo=1&sa=X&ei=BOCzT-_WK8_0sgbki5XCDA&ved=0COABEB8wPg HTTP/1.1" 403 208 These are Google IPs. The requests are every 30 seconds or so. My friend is not at work today. In apache_error.log I see: [Sat Sep 22 11:09:20 2012] [error] [client 66.249.66.242] client denied by server configuration: C:/wamp/www/aclk [Sat Sep 22 11:09:47 2012] [error] [client 66.249.71.36] client denied by server configuration: C:/wamp/www/search What the hell is going on? Please, help.

    Read the article

  • 500 Internal Server Error when setting up Apache on localhost

    - by Martin Hoe
    I downloaded and installed XAMPP, and to keep my projects nicely separated I want to create a VirtualHost for each one based on its future domain name. For example, in my first project (we'll say it's project.com) I've put this in my Apache configuration: NameVirtualHost 127.0.0.1 <VirtualHost 127.0.0.1:80> DocumentRoot C:/xampp/htdocs/ ServerName localhost ServerAdmin admin@localhost </VirtualHost> <VirtualHost 127.0.0.1:80> DocumentRoot C:/xampp/htdocs/sub/ ServerName sub.project.com ServerAdmin [email protected] </VirtualHost> <VirtualHost 127.0.0.1:80> DocumentRoot C:/xampp/htdocs/project/ ServerName project.com ServerAdmin [email protected] </VirtualHost> And this in my hosts file: # development 127.0.0.1 localhost 127.0.0.1 project.org 127.0.0.1 sub.project.org When I go to project.com in my browser, the project loads up successfully. Same if I go to sub.project.com. But, if I navigate to: http://project.com/register (one of my site pages) I get this error: Internal Server Error The server encountered an internal error or misconfiguration and was unable to complete your request. The error log shows this: [Sun May 20 02:05:54 2012] [error] [client 127.0.0.1] Request exceeded the limit of 10 internal redirects due to probable configuration error. Use 'LimitInternalRecursion' to increase the limit if necessary. Use 'LogLevel debug' to get a backtrace., referer: http://project.com/ Sun May 20 02:05:54 2012] [error] [client 127.0.0.1] Request exceeded the limit of 10 internal redirects due to probable configuration error. Use 'LimitInternalRecursion' to increase the limit if necessary. Use 'LogLevel debug' to get a backtrace., referer: http://project.com/ Any idea what config items I got wrong or how to get this working? It happens on any page that's not in in the root directory of project.com. Thanks.

    Read the article

  • Windows repair console, impossible?

    - by Daniel
    I found an old Windows XP SP2 in my -trash- cd can and tried it on a 30 GB FAT32 partition. Installation went fine till the copying operation was completed and XP asked for reboot. After that either it starts over again or throws invalid disk. Starting over is an infinite loop the only way I see is to choose the "Repair console" but I'm not used to a DOS box. Can anyone help me through this harmful installation?

    Read the article

  • AviSynth ChangeFPS: combining videos with different framerates

    - by Daniel Saner
    I have two video recordings of the same scene, but with different framerates, that I would like to combine using an AviSynth script. One video is recorded at 30fps, the other at 120fps. What I would like to do is to keep them temporally synchronised, meaning that for each frame of the 30fps video, the output should display 4 frames from the 120fps video. I would like the final output video to play at 30fps so that the duration is 4 times the original recordings. From AviSynth's documentation, it seems ChangeFPS is the function I'll need, since it removes and duplicates frames, while 'AssumeFPS' just changes the playback speed (and my plan is basically to quadruple every frame of the 30fps clip). However, the filter does not seem to do what it says. If I try: clip30 = AviSource("0326.avi").ChangeFPS(120) clip120 = AviSource("0326-120fps.avi") it doesn't affect the playback speed or frame count of the 30fps clip at all, but removes every fourth frame from the 120fps clip, which is not at all what I want. Unfortunately, appending .ChangeFPS(7.5) to the clip120 instead does not have the same inverse effect—in that case, it does exactly what's to be expected. Alternatively, if I try: clip30 = AviSource("0326.avi").AssumeFPS(7.5) clip120 = AviSource("0326-120fps.avi") there is no effect at all, both clips are played back at 30fps, meaning that only a quarter of the 120fps clip has been shown by the time the 30fps clip is over. So how can I combine these two clips in the manner I want? I was unable to find any other internal or external filters that would help me do that. It seems to me that if ChangeFPS did what the manual says, it would be the right one for the job.

    Read the article

  • Configure IIS to pass-through CGI output without any conditioning

    - by Daniel Watrous
    I'm building a web service on Windows 2008 R2 with IIS 7.5 and Python 2.5. Right now I have the Handler Mappings and everything else setup just fine, Except that IIS is modifying what it gets back from the CGI script before sending it along the the client. Here's an example: I wrote the following CGI script: # hello.py print "Status: 400 Bad Request" print "Content-Type: text/html" print print "Error Message" According to the HTTP spec this should be fine and a Status of 400 should allow for a description of the error message in the body of the response. When the server response actually comes back to me I get the following: Status: 400 Bad Request Date: Fri, 11 Feb 2011 17:58:30 GMT X-Powered-By: ASP.NET Connection: close Content-Length: 11 Server: Microsoft-IIS/7.5 Content-Type: text/html Bad Request I've seen on this forum and others where I can change or eliminate the X-Powered-By header element, but I would like IIS to leave it alone altogether. I'm not sure why it takes my response, deletes "Error Message" from the body and replaces it with "Bad Request" and then adds all that other junk in. Is there some way to tell IIS to just send the response along without making any changes at all?

    Read the article

  • How to monitor a folder for changes, and execute a command if it does, on Windows?

    - by Camilo Martin
    There are similar questions for Linux and Mac, but I'm after a Windows solution here. The problem is as follows: I want to write several (js) script files in a folder, and have a program monitor that folder for file changes and new files being added, and run a command whenever that happens (to compile them all into one single file). The solution has to: Monitor both file changes and new files being added, in a folder. Run a command only if there is any change. It would be best if it either is a built-in solution (like a JScript or VBscript snippet), or something that does not require installation.

    Read the article

  • How can I switch from a custom linux network namespace back to the default one?

    - by Martin
    With ip netns exec you can execute a command in a custom network namespace - but is there also a way to execute a command in the default namespace? For example, after executing these two commands: sudo ip netns add test_ns sudo ip netns exec test_ns bash How can the newly created bash execute programs in the default network namespace? There is no ip netns exec default or anything similar as far as I've found. My scenario is: I want to run a SSH server in a separate network namespace (to keep the rest of the system unaware of the network connection, as the system is used for network testing), but want to be able to execute programs in the default network namespace via the SSH connection. What I've found out so far: Created network namespaces are listed as files under /var/run/netns (but there is no file for the default namespace) The ip netns exec code can be found here: http://git.kernel.org/cgit/linux/kernel/git/shemminger/iproute2.git/tree/ip/ipnetns.c#n132 - I haven't grasped everything that it is doing yet, but it doesn't look very promising. ip netns identify $$ as suggested by Howto query and change network namespace on linux? returns nothing when in the default network namespace

    Read the article

  • How can Windows defragmentation tools cause internal fragmentation in SQL Server?

    - by Martin
    I was just reading this article where the author talks about the file system fragmentation that can be caused by growing database files. There was one bit that I didn't quite follow. What about Windows defragmentation tools? Although you can use a Windows defragmentation tool to defragment your database files, these tools simply move chunks of files around to get them contiguous. This moving of chunks of files can cause internal fragmentation that you might not be able to resolve easily. Is the author saying here that the disc defragmenter makes no attempt to put the chunks of files in the correct sequence or have I misunderstood? If he is saying that then is this a limitation of all disc defragmenter utilities - even commercial ones?

    Read the article

  • Unicode support between different OS and browsers

    - by Martin Trigaux
    I would like to develop a web application that uses unicode. The problem is that I don't know if the user supports or not the full unicode set. First question : is the unicode support depends on the browser or the operating system ? Second question : how well main browsers/OS behave ? To goal is to find big subsets of mainly supported unicode characters (with the fact that I accept to not support old tech) Thank you

    Read the article

  • Arrow keys don't work in htop on OS X in Terminal

    - by Daniel Huckstep
    Not sure when it happened, or what I did (if anything), but my arrow keys don't work in htop anymore to scroll around. You should be able to press up and down to scroll up and down the process list, but they don't work. Some keys tend to be the equivalent of 'go back' or something. If I'm on the settings screen, left, up and down all go back to the main screen. htop seems to be the only affected program.

    Read the article

  • Best Secure Encryption for Zip Files via Linux

    - by Daniel
    I want to use highly secure encryption for zipped files via Linux/Ubuntu using a command line terminal, what is the best command line tool to get this job done? zip -e -P PASSWORD file1 file2 file3 file4 Or 7za a file.7z *.txt -pSECRET What encryption is used and how secure is it?

    Read the article

< Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >