Search Results

Search found 4993 results on 200 pages for 'drivers signing'.

Page 38/200 | < Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >

• Disk boot failure in Windows 7 64-bit after installing the latest NVIDIA drivers

  - by Domchi

  I successfully installed the newest NVIDIA drivers (275.33) in Windows 7 64-bit and rebooted afterwards just in case. After the reboot, I got an error about missing MBR. I disconnected the slave disk so that Windows doesn't get confused and got this message: DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER It seems that Windows doesn't recognize the main disk anymore. I booted from Windows install disk but the main disk doesn't get listed as possible Windows locations to repair, and I can't get to it from the recovery prompt. The BIOS does recognize it, and I'm able to see it if I run diskpart - however "detail disk" in diskpart says that there are no volumes on the disk. I also tried bootrec /FixMbr without effect, and bootrec /FixBoot which gives the error message: Element not found. What else can I do? Why would diskpart say there are no volumes on the disk?

  Read the article

• Need advice to choose correct wi-fi drivers for Dell Vostro 3560

  - by overdriven

  I'm having problems with my Dell notebook's Wi-Fi, it can't see some of the available access points, despite they are close and I used to be connected to them yesterday. Other notebooks and my phone can see them. I believe it's a driver issue, since after installing system I haven't downloaded any network drivers. I went to Dell's website to search for them but I have no idea which should I choose. For my Dell Vostro 3560 and system Windows 8.1 64bit these are available: Intel Smart Connect Technology Application APP_iSCT_W8.1_A00_Setup-TJW84_ZPE.exe (23 MB) Vostro-3560_Network_Application_TJW84_WN_4.2.40.2418_A00.EXE (29 MB) Dell Wireless 1704 WLAN 802.11b/g/n (2.4GHz), Bluetooth v4.0+HS Driver DW1704_W8.1_A00_Setup-K1HGN_ZPE.exe (239 MB) Network_Driver_K1HGN_WN_6.30.223.143_A00.EXE (247 MB) Dell Wireless1703 802.11 b/g/n, BT4.0 + HS Driver Dell Wireless1901 802.11a/b/g/n (2.4GHz and 5GHz), Bluetooth v4.0+HS Driver DW1703_DW1901_Win8.1_A00_Setup-7FPWR_ZPE.exe (265 MB) Network_Driver_7FPWR_WN_10.0.0.263_A00.EXE (272 MB) Realtek RTL8105E/RTL8111E Ethernet Controller Driver LOM_Realtek_W8.1_A00_Setup-0XCVW_ZPE.exe (6 MB) Network_Driver_0XCVW_WN_8.018.0621.2013_A00.EXE (12 MB) Intel® Centrino® Wireless-N 2230 Bluetooth Driver BT_Intel_W8.14_A00_Setup-XR83W_ZPE.exe (31 MB) Network_Application_XR83W_WN_3.1.1307.0362_A00.EXE (37 MB)

  Read the article

• Adding localhost entry to Windows\System32\drivers\etc\hosts file with port number

  - by Kamyar

  I have set up a local site under IIS 7.5 under port 900. to access it I should type localhost:900 in the address bar. I'm a little bit familiar with the System32\Drivers\etc\hosts file and I know I can define my custom name with IP adderss there. For example I can add: 127.0.0.1 MyLocalSite and whenever I type in http://MyLocalSite in the browser, The DNS resolves its IP as 127.0.0.1. Is there anyway that I can specify port number in that file as well? (e.g. 127.0.0.1:900 MySecondSite and the DNS resolves it correctly) I tried 127.0.0.1:900 and 127.0.0.1::900 with no luck.

  Read the article

• Removing integrated video card drivers broke other hardware?

  - by jsnlxndrlv

  I just purchased and installed an XFX ATI Radeon HD 4650 video card. The installation instructions said to remove the old video card drivers before installing the new driver. I did both things, but now every time I start my computer, the Found New Hardware wizard pops up for the following three devices: PCI Device SM Bus Controller Other PCI Bridge Device Furthermore, my LAN port no longer functions. The cable's connected, and the light on the port comes on, but the computer can't find any servers when I attempt to connect with it. The modem and router are working, and obviously I'm able to use the other computer here to post this. What do I do to fix this?

  Read the article

• Installing drivers and getting -> Error Code 28

  - by Adrov

  I've recently upgraded mainboard, without reinstalling OS, so I guess that's the issue. I really don't want to install OS at this moment. Issue is I can't install USB drivers, if I right-click uninstall, just installs same driver, which isn't working ofc. and giving error code 28. I fixed such issue once long long time ago, with editing registry, but I really can't remember what and where I have to do, so if anyone know please let me know, I'm also open to all other solutions to this issue. http://i.stack.imgur.com/AuBtB.png

  Read the article

• How to repackage NVIDIA .run drivers into .deb with DKMS

  - by Delan Azabani

  At present, Ubuntu offers the 195.36.24 drivers as nvidia-current in their repository. This packaged driver is pretty cool as it uses DKMS so you don't have to keep reinstalling the driver after a new kernel version. The NVIDIA .run package drivers are at version 257 (beta) but they don't use DKMS so the graphics screws up every time a new kernel is installed and you don't reinstall the driver. How can I modify the .run to use DKMS and even better, package it as a deb package?

  Read the article

• Unable to install USB drivers for android

  - by Dave

  I'm running Win XP 64bit and am connecting a Motocliq to my computer. The device is recognized by windows and shows up in the device manager (Motorola ADB Interface), however when I try to install drivers (manually, from the usb_driver revision 3 provided by Android) it fails giving the error "The hardware was not installed because the wizard cannot find the necessary software." Does anyone else have experience installing this drivers on XP64bit/Motocliq?

  Read the article

• Most suitable Unix platform for developing device drivers

  - by bugspy.net

  I completely newbie in device drivers, so I hope my question is in place, but I need to develop a driver to control some equipment. I was thinking on using Linux as the host OS, but not sure if it is such good idea. I've heard some horror stories about the mess of developing device drivers under Linux. Is there a better alternative under the *Nix world? Or maybe should I check other OSes?

  Read the article

• C#, MEF - Sign trusted plugins for abuse reduction

  - by Marks

  Hi there. I have a program that is extendable by plugins using the Microsoft Extensibility Framework. But i dont want untrusted sources to give out plugins that may be insecure. So i want to sign the plugins (maybe with Visual Studio's built in signing) and check if the plugins are trustworthy at program start. I didn't find a way to check DLL signing from inside C#. And also there is the problem, that I load the plugins with a DirectoryCatalog. There is no way to tell, which plugin is from which file. Anyone knows a way to do this? Thanks for any help, Marks

  Read the article

• drivers/rtc/hctosys.c: unable to open rtc device (rtc0) after recompile on boot

  - by squareone

  After recompiling a new kernel on CentOS 6.3, using the same kernel I have been using on several other machines, I am getting a kernel panic on two machines. I get the following when trying to boot: drivers/rtc/hctosys.c: unable to open rtc device (rtc0) (flashes this before displaying the panic below) not syncing: Attempted to kill init! exitcode=0x00000100 Pid: 1, comm: init Not tainted etc... I have been trying to figure out what is going on, and am having trouble doing so, and feel I have exhausted all of my options here. Any help would be appreciated. My grub.conf: default=0 timeout=5 splashimage=(hd0,0)/grub/splash.xpm.gz hiddenmenu title CentOS (3.4.18-rt29) root (hd0,0) kernel /vmlinuz-3.4.18-rt29 ro root=/dev/mapper/VolGroup-lv_root rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD rd_LVM_LV=VolGroup/lv_swap SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_LVM_LV=VolGroup/lv_root KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet panic=5 initrd /initramfs-3.4.18-rt29.img title CentOS (2.6.32-279.14.1.el6.x86_64) root (hd0,0) kernel /vmlinuz-2.6.32-279.14.1.el6.x86_64 ro root=/dev/mapper/VolGroup-lv_root rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD rd_LVM_LV=VolGroup/lv_swap SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_LVM_LV=VolGroup/lv_root KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet panic=5 initrd /initramfs-2.6.32-279.14.1.el6.x86_64.img Any help or guidance would be greatly appreciated.

  Read the article

• DIY a simple .inf on an existing .sys?

  - by Stijn Sanders

  In continuation of attempting to get an old Digi ST-1032 working on a new server, we've downgraded a server to Windows 2000 in an attempt to use the NT4 drivers. And it works, the old software setup works, finds the device on the SCSI bus, and connects the 32 ports to COM3..COM34 or any other set using the port remapper tool. The minor issue that remains is that Plug-and-Play still detects this device over SCSI and tries to wizard you into selecting a driver for it. Which doesn't exists (Digi Intl support confirms this device is so old, a 2000 or XP driver was never made). The exact name displayed is "DigiIntl ST-1032 SCSI Net Device" (Oddly enough, two devices get detected with this name, on two neighbouring LUN's, could one be the built-in terminator?) Is there a way to concoct a simple .inf that would (re-)register the existing sts.sys that appears to get registered by the (old) installer of the driver software?

  Read the article

• Sony VAIO TZ2 internal camera and Windows XP

  - by user34300

  I have a Sony Vaio TZ2 laptop here and I'm trying to install Windows XP SP3 on it. Everything works fine except of the integrated camera which is supposed to be a USB device but is absent in the Devoice Manager. I've read that it is important in what order you install drivers when you downgrade this Vista preinstalled model to Windows XP so I repeated once again the installation with the correct order by still had no luck with the camera. Can someone give me an advice on how to woke up this camera? Thanks!

  Read the article

• Windows 7 video driver for Intel 82865G graphics chipset

  - by Nick Kavadias

  I have an old Dell Inspirion 3000 which came with Windows XP. It's still quite decent, 3 GHz P4, 2 GB RAM. I've installed windows 7 RTM (x86) & the best resolution it will do is 640x480 with a generic driver. It has an integrated Intel 8265G graphics card, and only PCI slots on the motherboard. I cannot stick another graphics card on it. Can I get a working driver for Windows 7? Official Dell website only lists XP drivers Am I destined to have the suckiness of XP on this computer forever?

  Read the article

• NLB NIC w/ Static IP permanently "Acquiring Network Address" after adding more IP's to the cluster

  - by I.T. Support

  We have a 2 node NLB cluster. I recently added more IP's to the cluster range, after which point, the NLB NIC's on both of my nodes ended up in a permanent "acquiring network address" state. The cluster appears to be functioning despite this hang in acquiring an address. We've also rebooted the machines, and these NIC's remain in this state "acquiring network address" even after reboot, which I find troubling. Questions: Does anyone know where I can find documentation on how NLB binds to a NIC? (are there dll's involved, drivers, etc.) Does anyone know of any programs that have known incompatability issues with NLB? We have an application server installed on these NLB nodes (AOL Server) that interacts with the NIC's as well, and I suspect that it might be causing this issue. Before I go directly to Microsoft, I want to gather as much information as possible about the issue. Any help / guidance would be much appreciated...

  Read the article

• Wireless network not working Linux Mint

  - by zharvey

  I have a home LAN that I am confident is working properly (I have a Windows 7 and an Ubuntu Desktop machine that both see the router and a working Internet connection). I just installed Linux Mint (Maya) on a new machine and although I can connect to the Internet via a wired (ethernet) connection, it does not see my wireless network. In fact, as you can see in the screenshot below, it doesn't even look like it has the drivers to be able to detect a wireless network... I have ran update manager and made sure that I am up-to-date with everything and have restarted. Any ideas here?!?

  Read the article

• Serial port game controller (racing pedals)

  - by Cheesegraterr

  I have an old madCatz racing wheel for the playstation 2. The gas and brake pedals are connected to the wheel by a serial port. I just bought a usb racing wheel for the PC but it lacks pedals so I wanted to see if I could get these old madCatz working. I just installed the serial port in my motherboard, but now I have a problem with software. Nothing will recognize the pedal. I was wondering if there are any programs or drivers out there that will allow me to set the pedals up to work. Any advice would be appreciated!

  Read the article

• Can't add a network printer - Windows 7

  - by r0ca

  Hi all, I have an HP 2600n installed on a SBS2003 server. This printer works fine when I print from the server itself and also from my Windows 7 computer #1. From my Windows 7 #2, it doesn't work. I get the error message that I need to install the driver. The error message is in french but here it the translation. No drivers has been found Windows is unable to find a driver for HP Color Laserjet 2600n on the network. To find a driver manually, click ok. If not, click on cancel and contact your sys adm. I reinstalled from scratch the printer, deleted the driver... Still no luck Any takers?

  Read the article

• Realtek audio AC 97 5.1 on Windows 7: Terrible subwoofer quality

  - by Edu

  I have a media center PC with on-board Realtek AC97 Audio. I have been using Windows XP for a couple of years with great audio quality. I just upgraded this PC with Windows 7 and installed the latest Realtek drivers from http://www.realtek.com.tw/downloads/ At the testing screen, all the speakers works correctly (including subwoofer). Despite that, while playing any movie or music, the subwoofer quality is terrible. From it it just comes noises, in the correct rhythm but quite low and quite out of tone. I compensated the loudness by putting the other speakers lower but the sound of the subwoofer is really terrible. Is there anyone facing the same problem? Does anyone have a workaround for that? PS.: I had gone past the steps given in Terrible noises from subwoofer of ACER Aspire 6930 with Realtek sound chip but still I have a bad quality of sound. My problem is very similar to the one in http://www.mp3car.com/car-audio/143796-realtek-hd-audio-is-robbing-my-subwoofer.html

  Read the article

• MP3 player no longer syncing

  - by zildjohn01

  I recently installed third-party drivers for the (Sony) PS3 controller on my friend's PC (Windows XP). I found out a few days later that his MP3 player (also Sony) is no longer recognized by Windows. He gets the "connect device" sound, and about 250ms later, the "disconnect device" sound. I figured the controller driver took over the Walkman's device ID, so I went through the registry and C:\Windows\inf removing all references to Sony's VID (054C), but I haven't had any luck. What would you do in this situation?

  Read the article

• Audio doesn't work on Windows XP guest (WS 7.0)

  - by Mads

  I can't get audio to work with on a Windows XP guest running on VMware Workstation 7.0 and Ubuntu 9.10 host. Windows fails to produce any audio output and the Windows device manager says the Multimedia Audio Controller is not working properly. Audio is working fine in the host OS. When I open Multimedia Audio Controller properties it says: Device status: The drivers for this device are not installed (Code 28) If I try to reinstall the driver I get the following error message: Cannot Install this Hardware There was a problem installing this hardware: Multimedia Audio Controller An Error occurred during the installation of the device Driver is not intended for this platform Has anyone else experienced this problem?

  Read the article

• Windows 2003 SP1 terminal server printers Disappear after reboot - HP laserjet 4240

  - by Alex

  had working PCL6 laserjet 4240 driver. needed to downgrade to PCl5, tried but did not get clean install. tried again and it seemed to work (this is 2003 enterprise terminal server SP2) Have over 40 working laserjets (5, 4000, 4100 and 18 of the 4240) After normal nightly reboot the 18 4240 printers were 'gone'. Worked w/Microsoft who said bad HP driver issues - weird since they work on other terminal servers. downloaded latest version, etc. from HP site and can NOT get to work. As soon as I install, then do a Net Stop Spool and Net Start Spooler the printer is 'gone'. Current workaround is to use HP 4000 PCL5 drivers for all of these 4240 printers.

  Read the article

• Can I use a display driver from Windows 8 in Windows 7?

  - by adam0101

  My latest display driver doesn't support WDDM 1.0, and I need it to be at least version 1.1. I've been attempting to get the Windows Phone 7 SDK working on my HP Pavillion dv9000, but the phone emulator requires 1.1 or higher. My drivers are as up-to-date as they can get. I even tried a modded driver found here, but no go. Then, while evaluating Windows 8 Developer Preview on a different partition I noticed that dxdiag.exe showed it was using WDDM 1.2. I tried installing Windows Phone 7 SDK on Windows 8, but I get an "Internal Error" popup and "Connection failed because of invalid command-line arguments" in the error window in Visual Studio. I'm guessing because Windows Phone 7 SDK isn't supported on Windows 8 yet. So my question is this: Can I get Windows 7 to use the display driver Windows 8 is using to get WDDM 1.2 on Windows 7 and how would I go about doing it?

  Read the article

• How to change the color of Razer Mamba?

  - by Delphy

  I just bought a Razer Mamba and I was in the process of configuring it when I noticed that the "Lighting and Power" tab was just "Lighting" and didn't give me the option to change thing. I've seen Youtube videos and I'm wondering how to get the same Razer Configuration program as all these other people. I went to the Razer site and downloaded the most recent drivers but no help there. Something is missing and I don't know what. I am trying to get it run on Windows 7.

  Read the article

• How to enable Unity 3D support in 12.04 using open-source drivers for RadeonHD cards?

  - by martin

  As the title says I can't enable the Unity 3D support when I'm using open-source drivers (xorg-edgers). I have an xfx Radeon HD 6950 by the way. If I install the proprietary 12.3 drivers from AMD it works, but I get poorer 2D performance than the open-source drivers and also I get some freezes and lock ups at random. So because of this I'm trying the open-source drivers and so far no issues at all, except this one. Running this command $ /usr/lib/nux/unity_support_test -p shows this: OpenGL vendor string: VMware, Inc. OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 0x300) OpenGL version string: 2.1 Mesa 8.0.2 Not software rendered: no Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no And this command $ lspci -nn | grep VGA shows: 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Cayman PRO [Radeon HD 6950] [1002:6719] So, is this normal? Do I need to go back to proprietary drivers to enable Unity 3D? If anyone can give me help, I'll much appreciate it.

  Read the article

• What's the difference between these Intel things?

  - by Coldblackice

  My head still spins with the various Intel "things" that may (or may not) need installing/configuring/yaddayadda'ing: Intel Rapid Storage Technology (is this driver? a software manager/package?), Intel Chipset (i.e., Intel INF Update Utility, Intel RST OROM, Intel RST driver, Intel Matrix Manager, etc. I think I have a basic understanding that the OROM is the low-level BIOS "driver", which communicates with the higher-level RST driver (in Windows). But what's the Chipset Installation software? What's the INF installation/update software? I'm confused as to what the other pieces are (or why there are so many to begin with). And as for a practical matter -- I'm wanting to upgrade my BIOS with a recent Intel OROM included, and then also update the Intel RST drivers in Windows -- BUT, as for the Windows side of things, I don't know what I should uninstall -- the Intel Chipset installer thing (through official uninstaller), Intel RST Manager, finding the individual Intel devices in Device Manager and right-clicking-uninstall/deleting, etc.

  Read the article

< Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >