Search Results

Search found 3657 results on 147 pages for 'motion planning'.

Page 38/147 | < Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >

• Microsoft Researchers shows off best Touch Screen ever made. Better than Apple touch screens!

  - by Gopinath

  All the touch devices we have in market today like iPads, iPhones, Samsung tablets and phones, etc.  have a very small issue – 100 milliseconds of lag. The lag is the amount of time a touch device takes to respond after you touch the device. The 100 milliseconds of lag may not be an issue when you are tapping and swapping the interface elements on a device, but they are apparent when you wing your finger around the screen faster. For example if you use any painting app, the lag is very obvious and screen responds slowly than an artist can paint with his finger. Researchers at Microsoft labs came out with a prototype of touch device that drastically cuts down the 100 milliseconds of lag time to just 1 millisecond. That’s 100 times faster than today’s touch screen devices. Check out the video embedded below for a demo of new touch screen. Over at TechCrunch, Chris Velazco says: The difference is staggering, especially when Dietz trots out the slow-motion footage. With the delay between touch input and screen response slashed by orders of magnitude, a device that sports the sort of super-low-latency Dietz envisions has the potential to feel far more (for lack of a better term) natural than its brethren. There’s zero delay when you slide a checker across a board, for example, and bringing that sort of instantaneous feedback to the many screens in our lives could help to bridge the gap between operating a bit of software and the feeling of interacting with objects.   It will be great boost to Microsoft’s tablet strategy if they succeed in bringing this research into mass market and allow it’s partners to use the technology on Windows 8 tablets.

  Read the article

• Play Updated Retro Arcade Games for Free Courtesy of Microsoft

  - by Jason Fitzpatrick

  As part of a promotion for Internet Explorer 10, Microsoft comissioned Atari to update several classic retro games from the arcade and the Atari consoles. Fortunately for those of us looking for a retro gaming fix, you can play the games in any HTML5-enabled browser. While game play is really smooth on most games there are a few little quirks that using Internet Explorer 10 does take care of. First, if you’re not on IE10, you’ll see a little advertisement before you begin playing each game. Second, some games call on some of the new touch/motion variable functionality built into IE10 for the Windows 8 tablet experience and they’ll stall out when they reach the point in the game they need to call that variable. That said, we played quite a few games without any hiccups at all. Hit up the link below to play classics like Asteroids, Lunar Lander, Pong, Super Breakout, and more. Atari IE10 Promo Gallery [Atari] HTG Explains: Why Do Hard Drives Show the Wrong Capacity in Windows? Java is Insecure and Awful, It’s Time to Disable It, and Here’s How What Are the Windows A: and B: Drives Used For?

  Read the article

• How to recover broken MJPEG AVI file after a camera crash

  - by Jam K

  I was recording a video when my KODAK EASYSHARE M531 Digital Camera fell to the ground and turned off. When i turned it on nothing happened to the camera but the video file is somehow broken. Obviously the camera did not have time to convert and close it properly. $file myvid.avi myvid.AVI: data where it should be: another_vid.AVI: RIFF (little-endian) data, AVI, 640 x 480, ~30 fps, video: Motion JPEG, audio: uLaw (stereo, 12000 Hz)` I would like to fix my video which I believe needs to be converted to AVI. Any idea? VLC does not play the file and returns: could not determine type of stream

  Read the article

• My First Iteration Zero

  - by onefloridacoder

  I recently watched a web cast that covered the idea of planning from the concept stage to the product backlog.  It was the first content I had seen related to Iteration Zero and it made a lot of sense from a planning and engagement perspective where the customer is concerned.  It illuminated some of the problems I’ve experienced with getting a large project of the ground.  The idea behind this is to just figure out get everyone to understand what needs to be constructed and to build the initial feature set from a *very* high level.  Once that happens other parts of the high level construction start to take place.  You end up with a feature list that describes what the business wants the system to do, and what it potentially may (or may not) interact with.  Low tech tools are used to create UI mockups that can be used as a starting point for some of the key UI pieces. Toward the end of the webcast they speaker introduced something that was new to me.  He referred to it as an executable skeleton or the steel thread.  The idea with this part of the webcast was to describe walking through the different mocked layers of the application.  Not all layers and collaborators are involved at this stage since it’s Iteration Zero, and each layer is either hard-coded or completely mocked to provide a 35K foot view of how the different layers layers work together.  So imagine two actors on each side of a layer diagram and the flow goes down from the upper left side down through a a consumer, thorough a service layer and then back up the service layer to the destination/actor. I would imagine much could be discussed moving through new/planned or existing/legacy layers, or a little of both to see what’s implied by the current high-level design. One part of the web cast has the business and design team creating the product box (think of your favorite cereal or toy box) with all of the features and even pictures laid out on the outside of the box.  The notion here is that if you handed this box to someone and told them your system was inside they would have an understanding of what the system would be able to do, or the features it could provide.    One of the interesting parts of the webcast was where the speaker described that he worked with a couple of groups in the same room and each group came up with a different product box – the point is that each group had a different idea of what the system was supposed to do.  At this point of the project I thought that to be valuable considering my experience has been that historically this has taken longer than a week to realize that the business unit and design teams see the high level solution differently.  Once my box is finished I plan on moving to the next stage of solution definition which is to plan the UI for this small application using Excel, to map out the UI elements.  I’m my own customer so it feels like cheating, but taking these slow deliberate steps have already provided a few learning opportunities.    So I resist the urge to load all of my user stories into my newly installed VS2010  TFS project and try to reduce or add to, the number of user stories and/or refine the high level estimates I’ve come up with so far.

  Read the article

• Are these components compatible and are there any significant bottlenecks?

  - by Tom Gullen

  I'm trying to buy a new pc, for software dev and a bit of gaming. I already have a 500gb HDD , and a PCI sound card I want to use as well. Is all this stuff compatible, and will it all work together and are there any significant bottlenecks? Case, Mobo and PSU "Primo Motion" AMD 880G DDR3 Ready Barebones (Socket AM3) http://www.overclockers.co.uk/showproduct.php?prodid=FS-268-OK&groupid=43&catid=1817&subcat= SSD 64GB Crucial RealSSD C300 64GB 2.5" SATA 6Gb/s Solid State Hard Drive http://www.overclockers.co.uk/showproduct.php?prodid=HD-007-CR&groupid=1657&catid=1660&subcat=1668 CPU AMD Phenom II X6 Six Core 1090T Black Edition 3.20GHz (Socket AM3) http://www.overclockers.co.uk/showproduct.php?prodid=CP-266-AM&groupid=701&catid=6&subcat=1944 RAM 8GB Corsair Vengeance 8GB (2x4GB) DDR3 PC3-15000C9 1866MHz Dual Channel Kit http://www.overclockers.co.uk/showproduct.php?prodid=MY-292-CS&groupid=701&catid=8&subcat=1387 Graphics XFX ATI Radeon HD 5770 1024MB GDDR5 PCI-Express Graphics Card http://www.overclockers.co.uk/showproduct.php?prodid=GX-149-XF

  Read the article

• Managing flash animations for a game

  - by LoveMeSomeCode

  Ok, I've been writing C# for a while, but I'm new to ActionScript, so this is a question about best practices. We're developing a simple match game, where the user selects tiles and tries to match various numbers - sort of like memory - and when the match is made we want a series of animations to take place, and when they're done, remove the tile and add a new one. So basically it's: User clicks the MC Animation 1 on the MC starts Animation 1 ends Remove the MC from the stage Add a new MC Start the animation on the new MC The problem I run into is that I don't want to make the same timeline motion tween on each and every tile, when the animation is all the same. It's just the picture in the tile that's different. The other method I've come up with is to just apply the tweens in code on the main stage. Then I attach an event handler for MOTION_FINISH, and in that handler I trigger the next animation and listen for that to finish etc. This works too, but not only do I have to do all the tweening in code, I have a seperate event handler for each stage of the animation. So is there a more structured way of chaining these animations together?

  Read the article

• How do I use setFilmSize in panda3d to achieve the correct view?

  - by lhk

  I'm working with Panda3d and recently switched my game to isometric rendering. I moved the virtual camera accordingly and set an orthographic lens. Then I implemented the classes "Map" and "Canvas". A canvas is a dynamically generated mesh: a flat quad. I'm using it to render the ingame graphics. Since the game itself is still set in a 3d coordinate system I'm planning to rely on these canvases to draw sprites. I could have named this class "Tile" but as I'd like to use it for non-tile sketches (enemies, environment) as well I thought canvas would describe it's function better. Map does exactly what it's name suggests. Its constructor receives the number of rows and columns and then creates a standard isometric map. It uses the canvas class for tiles. I'm planning to write a map importer that reads a file to create maps on the fly. Here's the canvas implementation: class Canvas: def __init__(self, texture, vertical=False, width=1,height=1): # create the mesh format=GeomVertexFormat.getV3t2() format = GeomVertexFormat.registerFormat(format) vdata=GeomVertexData("node-vertices", format, Geom.UHStatic) vertex = GeomVertexWriter(vdata, 'vertex') texcoord = GeomVertexWriter(vdata, 'texcoord') # add the vertices for a flat quad vertex.addData3f(1, 0, 0) texcoord.addData2f(1, 0) vertex.addData3f(1, 1, 0) texcoord.addData2f(1, 1) vertex.addData3f(0, 1, 0) texcoord.addData2f(0, 1) vertex.addData3f(0, 0, 0) texcoord.addData2f(0, 0) prim = GeomTriangles(Geom.UHStatic) prim.addVertices(0, 1, 2) prim.addVertices(2, 3, 0) self.geom = Geom(vdata) self.geom.addPrimitive(prim) self.node = GeomNode('node') self.node.addGeom(self.geom) # this is the handle for the canvas self.nodePath=NodePath(self.node) self.nodePath.setSx(width) self.nodePath.setSy(height) if vertical: self.nodePath.setP(90) # the most important part: "Drawing" the image self.texture=loader.loadTexture(""+texture+".png") self.nodePath.setTexture(self.texture) Now the code for the Map class class Map: def __init__(self,rows,columns,size): self.grid=[] for i in range(rows): self.grid.append([]) for j in range(columns): # create a canvas for the tile. For testing the texture is preset tile=Canvas(texture="../assets/textures/flat_concrete",width=size,height=size) x=(i-1)*size y=(j-1)*size # set the tile up for rendering tile.nodePath.reparentTo(render) tile.nodePath.setX(x) tile.nodePath.setY(y) # and store it for later access self.grid[i].append(tile) And finally the usage def loadMap(self): self.map=Map(10, 10, 1) this function is called within the constructor of the World class. The instantiation of world is the entry point to the execution. The code is pretty straightforward and runs good. Sadly the output is not as expected: Please note: The problem is not the white rectangle, it's my player object. The problem is that although the map should have equal width and height it's stretched weirdly. With orthographic rendering I expected the map to be a perfect square. What did I do wrong ? UPDATE: I've changed the viewport. This is how I set up the orthographic camera: lens = OrthographicLens() lens.setFilmSize(40, 20) base.cam.node().setLens(lens) You can change the "aspect" by modifying the parameters of setFilmSize. I don't know exactly how they are related to window size and screen resolution but after testing a little the values above seem to work for me. Now everything is rendered correctly as long as I don't resize the window. Every change of the window's size as well as switching to fullscreen destroys the correct rendering. I know that implementing a listener for resize events is not in the scope of this question. However I wonder why I need to make the Film's height two times bigger than its width. My window is quadratic ! Can you tell me how to find out correct setting for the FilmSize ? UPDATE 2: I can imagine that it's hard to envision the behaviour of the game. At first glance the obvious solution is to pass the window's width and height in pixels to setFilmSize. There are two problems with that approach. The parameters for setFilmSize are ingame units. You'll get a way to big view if you pass the pixel size For some strange reason the image is distorted if you pass equal values for width and height. Here's the output for setFilmSize(800,800) You'll have to stress your eyes but you'll see what I mean

  Read the article

• PARTNER WEBCAST- ORACLE COMPETENCE - PROGRAM (COMPETENCE VIRTUAL)

  - by mseika

  I am pleased to invite you to join the second (Competence Virtual). In Competence - program we will present Oracle Applications' Product's new functions and features including sales positioning. The key objectives of these webcasts are to inspire System Integrator's implementation personnel to conduct successful after sales in their Customer projects. Competencewill be presented on 1st Monday of each quarter after the billable day (4:00 to 5:00 PM CET). The webcast is intended for System Integrator's Implementation Certified Specialists but Competence is open for other interested Oracle Applications system Integrator's personnel as well. At first, two Oracle representatives will discuss Oracle's contribution to Partners. Then you will see product breakout session followed by Q&A with Oracle Experts. Each session will last for maximum 1 hour. A Q&A Document covering all questions and answers will be made available two weeks after the webcast. What are the Benefits for Partners? Find out how Competence helps you to improve your after sales Discover new functions and features so you can enrich your Customer’s solution Learn more about Oracle Applications products, especially sales positioning Hear crucial questions raised by colleagues alike, learn from their interest Engage and present your questions to subject experts Be inspired of the richness of Oracle Applications portfolio – for your and your Customer’s benefit.   Note: Should you already be familiar with a specific Product, then choose another one. Doing so you would expand your knowledge of the overall Applications portfolio. Some presentations contain product demonstration, although these presentations are not intended to be extremely detailed technical presentations. Product breakout sessions:- Fusion CRM: Effective, Efficient and Easy- Fusion HCM: Talent management overview performance, goals, talent review- Distributed Order Management - Fusion SCM Solution- Oracle Transportation Management- Oracle Value Chain Planning: Demantra Sales & Operation Planning and Demantra Demand Management- Oracle CX (Customer Experience) - formerly CEM: Powering Great Customer Experiences- EPM 11.1.2.2 Overview- Oracle Hyperion Profitability and Cost Management, 11.1.2.1 For more details please visit and other breakout sessions on OPN page. Delivery FormatCompetence- program (Competence Virtual) is a series of FREE prerecorded Applications product presentations followed by Q&A. It will be delivered over the Web. Participants have the opportunity to submit questions during the cast via chat and subject matter experts will provide verbal answers live. Competence consists of several parallel prerecorded product breakout sessions, each lasting for max. 1 hour. At first, two Oracle representatives will discuss Oracle’s contribution to Partners. Then you’ll see the product breakout sessions followed by Q&A with Oracle Experts. A Q&A document covering all questions and answers will be made available two weeks after the webcast. You can also see Competence afterwards as its content will be available online for the next 6-12 months.The next Competence web casts will be presented as follows: June the 4th  2012 September the 3rd  2012 December the 3rd  2012 March the 4th  2013. Note: Depending on local network bandwidth please allow some seconds time the presentations to download. You might want to refresh your screen by pressing F5. DurationMaximum 1 hour For further information please contact me at [email protected]. Best regards Markku RouhiainenDirector, Applications Partner EnablementWestern Europe

  Read the article

• BI&EPM in Focus June 2012

  - by Mike.Hallett(at)Oracle-BI&EPM

  General News Thomas Kurian Discusses Oracle Exalytics, SAP HANA (replay | preso | press)  Accenture & Oracle Study: The Challenges of Corporate Financial Reporting  (link) Flash Demo: Oracle Hyperion Planning on Exalytics in the Public Sector (link) Flash Demo: OBIEE & Exalytics in Retail (link) Customers Italian Partner Alfa Sistemi implemented at Autovie Venete S.p.A. Integrates Business Intelligence and Performance Management to Improve Efficiency and Speed for Managing Public Works Projects (English version)  / Autovie Venete implementa un sistema integrato di Business Intelligence e Performance Management per migliorare l’efficienza e la tempestività dell’attività di Controlling di Commessa (Italian version). FANCL Gains 360-Degree View of Customers across Multiple Sales Channels, Reduces Reports by 75% Korea Yakult Improves Profit & Loss Analysis with Oracle Hyperion Planning and OBIEE Hill International Streamlines Forecasting, Improves Visibility into Project Productivity and Profitability Children’s Rights in Society Better Supports Organizational Mission with Advanced, Integrated, and Streamlined Business Intelligence Tools Profit: International utility Enel monitors the performance of global subsidiaries with Oracle Hyperion Applications (link) Profit: Charting a New Course: Korean Air gains altitude by leveraging its greatest asset: information (link)   Events June 12: Breaking Away from the Excel Add-In: Welcome to Hyperion Smart View 11.1.2.2 (link) June 13: Upgrading OBIEE 10g to 11g: Best Practices and Lessons Learned (performance architects) (link) June 14, The Netherlands: Strategies for Business Excellence, New Release of Oracle Hyperion EPM Suite (link) June 21: Comprehensive and Accurate Forecasting for Healthcare (link) June 26: What Exactly is Exalytics? (KPI Partners) (link) Webcast Replay: Is Your Company Able to Navigate Through Market Volatility? (link)  Webcast Replay: Is Hope and Email The Core of Your Reconciliation Process? (link) Webcast Replay: Troubleshooting EPM Reporting & Analysis 11.1.2.x  (link) Webcast Replay: Is your Organization Flying Blind when it comes to Understanding Profitability?  (link) Enterprise Performance Management Final Oracle EPM  Information Panel (CIP) survey on cost, profitability and performance reporting/scorecards is now OPEN (link) New on EPM Blog: What's Going on With IFRS? (link) How does Crystal Ball integrate with EPM Solutions? New collateral and demos on Crystal Ball Solution Factory!  (link) New Youtube Video: Business Case Analysis with Oracle Crystal Ball (link) Crystal Ball 11.1.2.2 is released! Grouped Assumptions in Sensitivity Charts, Data Filtering When Fitting Distributions and Parameter Edits When Fitting Distributions to name a few. Get full details from the online New Features Guide (link) New DRM Oracle-by-Examples now available (link) Support Blog: Hyperion Ledgerlink Sample Record and Windows 7: Now you see it, now you don’t  (link) Use Enterprise Manager FMW Control to Troubleshoot Oracle EPM 11.1.2 Family of Products (link) Business  Intelligence Whitepaper: Real-Time Operational Reporting for E-Business Suite via GoldenGate Replication to an Operational Data Store.  How Oracle enabled real-time operational reporting for its $20B services contract business with Golden Gate & OBIEE (link) KPI Partners ebook: Understanding Oracle BI Components and Repository Modeling Basics (link) “Getting Started with Oracle Endeca Information Discovery” video tutorials now available (link) Oracle BI Publisher Conversion Center: Convert from Crystal, Actuate, or Oracle Reports to Oracle BI Publisher (link) Oracle Fusion Applications: Monthly Partner Updates Webcast Replays to help BI partners understand how OBI, Essbase, BI-Apps and Fusion work together: More on Fusion CRM: Fusion Marketing More on Fusion CRM: Fusion CRM Sales Start-Up Packs and Expert Services for Implementation Partners Introducing the Oracle Fusion Accounting Hub Implementing Fusion Applications using Oracle's Composers Oracle Fusion Applications Co-Existence

  Read the article

• Kinect will recognise your finger movement

  - by Boonei

  Sources inside Microsoft suggest they MS guys are tying to improve motion controller. This could be a huge boost to gaming. There are quite a few things that we can do with our fingers when playing games like driving, shooting,sports etc. If fingers are captured then  XBox will give more realistic version of our avatar. Eurogamer has also suggested the same according to their sources. It would be only(mostly) a software update and would not require a new camera, because the USB controller interface currently in place in Kinect can take in data up-to 35MBps. The current utilization is only around roughly 1/2 of it. So there is currently a facility to send more data. Little more tech data, Kinect does transmit 320×240-pixel in 30 fps, if the device could capture and transfer at 640×480 pixels, then better resolution can detect more movements compared to current level of detection. Lets wait and watch ! This article titled,Kinect will recognise your finger movement, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

  Read the article

• Jumping with Mecanim synchronization

  - by Abhishek Deb

  I am using Unity3D 4.1 for one of my projects. I have a robot character which is always running. I am using mecanim animation system. What I really want:When I press Space bar, the character should jump up in the air, triggering an animation clip and then by the time it reaches the ground, the animation clip should also end. What actually is happening:When I press Space bar, the character jumps in the air. Animation clip plays as it should, but ends way before it reaches the ground. So, it looks like he is running in the mid air. What have I done: I have this humanoid robot setup with a jump animation bounded with the space bar key. Also, instead of using root motion, I am directly moving the robot from code. //Jumping if(Input.GetKeyDown(KeyCode.Space)){ rigidbody.AddForce(Vector3.up*jumpVelocty); anim.SetBool("Jump",true); } else anim.SetBool("Jump",false); Character's Details: Rigidbody = Mass:30, Freeze rotaion:x,y,z Capsule Collider = Material: metal, center(0,4.5,0), radius:1, height:11 Script = jumpVelocity:20000 Jump Animation Clip: ~ 2 seconds. I am really out of ideas how to synchronize everything. Should I make the character jump in some other way so that it quickly comes down and touches the ground to match the animation clip? If yes, please provide a direction.

  Read the article

• Using orientation to calculate position on Windows Phone 7

  - by Lavinski

  I'm using the motion API and I'm trying to figure out a control scheme for the game I'm currently developing. What I'm trying to achive is for a orienation of the device to correlate directly to a position. Such that tilting the phone forward and to the left represents the top left position and back to the right would be the bottom right position. Photos to make it clearer (the red dot would be the calculated position). Forward and Left Back and Right Now for the tricky bit. I also have to make sure that the values take into account left landscape and right landscape device orientations (portrait is the default so no calculations would be needed for it). Has anyone done anything like this? Notes: I've tried using the yaw, pitch, roll and Quaternion readings. Sample: // Get device facing vector public static Vector3 GetState() { lock (lockable) { var down = Vector3.Forward; var direction = Vector3.Transform(down, state); switch (Orientation) { case Orientation.LandscapeLeft: return Vector3.TransformNormal(direction, Matrix.CreateRotationZ(-rightAngle)); case Orientation.LandscapeRight: return Vector3.TransformNormal(direction, Matrix.CreateRotationZ(rightAngle)); } return direction; } }

  Read the article

• Streaming Flash Video - getting my feet wet

  - by Travis

  I'm working on a project that will involve having a couple thousand short videos online. I haven't done anything with online video before and this is all a bit new to me, so I am looking for some general advice... I would like to use Flowplayer, and I would like to encode the videos as H264s. I am enamoured with Flowplayer's slow motion feature, which if I understand correctly, is only available using a Wowza server. I'm wondering: Is it advisable to use a delivery network of some sort? (Flowplayer seems to have a partnership with HDDN, and recommends them. http://www.hddn.com/) Or would I be better off purchasing Wowza and installing it on our own server? (At first glance, it looks as though signing up with a network like HDDN is much simpler, but perhaps there are problems that come along with this...?) Any tips / warnings of imminent peril would be much appreciated. Thanks in advance.

  Read the article

• Roll a DIY Camera Jib for $25

  - by Jason Fitzpatrick

  Video gear is expensive; save your pennies by building a DIY camera jib for smooth camera movement on a budget. Over at Oliva tech they explain just how few parts you need to build their DIY jib: The guys here at the studio mocked up a simple DIY jib that is not only ridiculously inexpensive to piece together, but also very straight forward. The point of this jib was to get a very wide range of motion from top to bottom with only a few feet of 0.75? square tube, 1? angled aluminum, 1/4? nuts and bolts, and nylon washers is all you’ll need to put the jib together. This light weight jib can be used on small portable tripods, but will require a fluid head for panning left and right. Hit up the link below for a detailed parts list and build guide. How to Make a DIY Camera Jib [via Make] How to Own Your Own Website (Even If You Can’t Build One) Pt 1 What’s the Difference Between Sleep and Hibernate in Windows? Screenshot Tour: XBMC 11 Eden Rocks Improved iOS Support, AirPlay, and Even a Custom XBMC OS

  Read the article

• How to use mencoder to speed up video ?

  - by timday

  There's a webcam streaming WMV video that I can play/record with mplayer/mencoder (Debian Lenny including Debian-multimedia) just fine. I'd like to capture the video such that, when played back, it's faster (so say 100s of real time zooms past in every 1s of video). The "frameskip" filter seems like it ought to do this, but when I try e.g mencoder -o output.avi -ofps 25 -vf framestep=100 -ovc lavc -lavcopts vcodec=mpeg4:... <mms source URL> what I actually get is something which plays for the same length of time as it's allowed to capture for, but which only updates the displayed image every 4 seconds. Is there any way mencoder can be persuaded to do what I want ? (By the way, ideally I'd like to average the frames together to obtain motion-blur instead of just dropping/discarding most of them.).

  Read the article

• App to make a video from photos?

  - by chtfn

  I was wondering what could be a good app (with a GUI ;) ) for making a video from a bunch of photos or images, to create a time-lapse video, or a stop-motion animation, or even a video like this one. The idea is to set a really small time between each photo, but also to be able to change this time every so often, or add some effects, to make the succession smoother in particular. What would be perfect is a function that allows automatic cropping of the photos as well as exposure adjustment so they all have the same background and so the time-lapse video looks smoother. I know about the slide show app "Imagination" but the interval can not go under one second. Cheers! Edit: here is my progress, also thanks to the first answer: I tried Luciole, it is really simple and promessing, but pretty buggy, and I only could export an average video in .dv format (mpg2 and avi don't work). Apparently, it has difficulties when changing the fps. I also tried StopMotion: also pretty buggy, I had to go into preferences and modify the encoding commands to get a result, but it's the best result I got so far. But none of those has effects to make transitions smoother... I tried several diaporama apps: Imagination doesn't handle more than 1 image per second; PhotoFilmStrip (repo version and latest version from website): same problem even though you can go down to 0.1 second per image, it still behaves wierdly (going back to 1 second automatically); Videoporama: doesn't start at all on 12.04. Any other idea, folks?

  Read the article

• Physics not synchronizing correctly over the network when using Bullet

  - by Lucas

  I'm trying to implement a client/server physics system using Bullet however I'm having problems getting things to sync up. I've implemented a custom motion state which reads and write the transform from my game objects and it works locally but I've tried two different approaches for networked games: Dynamic objects on the client that are also on the server (eg not random debris and other unimportant stuff) are made kinematic. This works correctly but the objects don't move very smoothly Objects are dynamic on both but after each message from the server that the object has moved I set the linear and angular velocity to the values from the server and call btRigidBody::proceedToTransform with the transform on the server. I also call btCollisionObject::activate(true); to force the object to update. My intent with method 2 was to basically do method 1 but hijacking Bullet to do a poor-man's prediction instead of doing my own to smooth out method 1, but this doesn't seem to work (for reasons that are not 100% clear to me even stepping through Bullet) and the objects sometimes end up in different places. Am I heading in the right direction? Bullet seems to have it's own interpolation code built-in. Can that help me make method 1 work better? Or is my method 2 code not working because I am accidentally stomping that?

  Read the article

• Move a 2D square on y axis on android GLES2

  - by Dan

  I am trying to create a simple game for android, to start i am trying to make the square move down the y axis but the way i am doing it dosent move the square at all and i cant find any tutorials for GLES20 The on draw frame function in the render class updates the users position based on accleration dew to gravity, gets the transform matrix from the user class which is used to move the square down, then the program draws it. All that happens is that the square is drawn, no motion happens public void onDrawFrame(GL10 gl) { user.update(0.0, phy.AccelerationDewToGravity); GLES20.glClear(GLES20.GL_COLOR_BUFFER_BIT | GLES20.GL_DEPTH_BUFFER_BIT); // Re draws black background GLES20.glVertexAttribPointer(maPositionHandle, 3, GLES20.GL_FLOAT, false, 12, user.SquareVB);//triangleVB); GLES20.glEnableVertexAttribArray(maPositionHandle); GLES20.glUniformMatrix4fv(maPositionHandle, 1, false, user.getTransformMatrix(), 0); GLES20.glDrawArrays(GLES20.GL_TRIANGLE_STRIP, 0, 4); } The update function in the player class is public void update(double vh, double vv) { Vh += vh; // Increase horrzontal Velosity Vv += vv; // Increase vertical velosity //Matrix.translateM(mMMatrix, 0, (int)Vh, (int)Vv, 0); Matrix.translateM(mMMatrix, 0, mMMatrix, 0, (float)Vh, (float)Vv, 0); }

  Read the article

• Make an object slide around an obstacle

  - by Isaiah

  I have path areas set up in a game I'm making for canvas/html5 and have got it working to keep the player within these areas. I have a function isOut(boundary, x, y) that returns true if the point is outside the boundary. What I do is check only the new position x/y separately with the corresponding old position x/y. Then if each one is out I assign them the past value from the frame before. The old positions are kept in a variable from a closure I made. like this: opos = [x,y];//old position npos = [x,y];//new position if(isOut(bound, npos[0], opos[1])){ npos[0] = opos[0]; //assign it the old x position } if(isOut(bound, opos[0], npos[1])){ npos[1] = opos[1]; //assign it the old y position } It looks nice and works good at certain angles, but if your boundary has diagonal regions it results in jittery motion. What's happening is the y pos exits the area while x doesn't and continues pushing the player to the side, once it has moved the player to the side a bit the player can move forward and then the y exits again and the whole process repeats. Anyone know how I may be able to achieve a smoother slide? I have access to the player's velocity vector, the angle, and the speed(when used with the angle). I can move the play with either angle/speed or x/yvelocities as I've built in backups to translate one to the other if either have been altered manually.

  Read the article

• Successfully Deliver on State and Local Capital Projects through Project Portfolio Management

  - by Sylvie MacKenzie, PMP

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} While the debate continues on Capitol Hill about which federal programs to cut and which to keep, communities and towns across America are feeling the budget crunch closer to home. State and local governments are trying to save as many projects as they can without promising too much to constituents – and they, in turn, want to know where their tax dollars are going. Fortunately, with the right planning and management, you can deliver successful projects and portfolios on a limited budget. Watch the replay of our recent webcast with Oracle Primavera and Industry Product Manager Garrett Harley that will demonstrate how state and local governments can get the most out of their capital projects and learn how two Oracle Primavera customers have implemented project portfolio management practices to: Predict the cost of long-term capital programs and projects Assess risk and mitigation strategies Collaborate and track performance across government agencies Speakers: Garrett Harley, Industry and Product Manager, Oracle Primavera Cory Davis, Director of Capital Renovation and New Construction, Chicago Public Schools Julie Owen, PSP™, CCC™, Sr. Project Controls Manager,LA Metro Transit Authority With the right planning and management, state and local governments can deliver successful projects on a limited budget. 1024x768 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif"; mso-fareast-font-family:"Times New Roman";}

  Read the article

• EEE PC 701/4G Surf Internal Drive: Is it really SSD?

  - by Bart Silverstrim

  I have an old EEE PC with the 4 Gig internal drive. Everything I've read keeps saying it's an SSD drive; running lshw tells me that it's an ATA disk, Silicon Motion SM. The thing seems to be rather slow, though. I know it has a 900 Mhz Celeron processor and only 512 meg of RAM, but it seems like drive access is slow even for those specs. Does anyone know if it really has an SSD drive? I thought that compared to regular hard disks SSD's were blazing fast, and this feels like and acts like it's pulling from something more akin to an internal USB memory stick.

  Read the article

• Type of computer for a developer on the road

  - by nabucosound

  Hi developers: I am planning to be traveling through eurasia and asia (russia, china, korea, japan, south east asia...) for a while and, although there are plenty of marvelous things to see and to do, I must keep on working :(. I am a python developer, dedicated mainly to web projects. I use django, sqlite3, browsers, and ocassionaly (only if I have no choice) I install postgres, mysql, apache or any other servers commonly used in the internets. I do my coding on vim, use ssh to connect, lftp to transfer files, IRC, grep/ack... So I spend most of my time in the terminal shells. But I also use IM or Skype to communicate with my clients and peers, as well as some other software (that after all is not mandatory for my day-to-day work). I currently work with a Macbook Pro (3 years old now) and so far I am very happy with the performance. But I don't want to carry it if I am going to be "on transit" for long time, it is simply huge and heavy for what I am planning to load in my rather small backpack (while traveling, less is more, you know). So here I am reading all kind of opinions about netbooks, because at first sight this is the kind of computer I thought I had to choose. I am going to use Linux for it, Microsoft is not my cup of tea and Mac is not available for them, unless I were to buy a Macbook air, something that I won't do because if I am robbed or rain/dust/truck loaders break it I would burst in tears. I am concerned about wifi performance and connectivity, I am going to use one of those linux distros/tools to hack/test on "open" networks (if you know what I mean) in case I am not in a place with real free wifi access and I find myself in an emergency. CPU speed should be acceptable, but since I don't plan to run Photoshop or expensive IDEs, I guess most of the time I won't be overloading the machine. Apart from this, maybe (surely) I am missing other features to consider. With that said (sorry about the length) here it comes my question, raised from a deep ignorance regarding the wars betweeb betbooks vs notebooks (I assume tablet PCs are not for programming yet): If I buy a netbook will I have to throw it away after 1 month on the road and buy a notebook? Or will I be OK? Thanks! Hector Update I have received great feedback so far! I would like to insist on the fact that I will be traveling through many different countries and scenarios. I am sure that while in Japan I will be more than fine with anything related to technology, connectivity, etc. But consider that I will be, for example, on a train through Russia (transsiberian) and will cross Mongolia as well. I will stay in friends' places sometimes, but most of the time I will have to work from hostel rooms, trains, buses, beaches (hey this last one doesn't sound too bad hehe!). I think some of your answers guys seem to focus on the geek part but loose the point of this "on the road" fact. I am very aware and agree that netbooks suck compared to notebooks, but what I am trying to do here is to find a balance and discover your experiences with netbooks to see first hand if a netbook will be a fail in the mid-long term of the trip for my purposes. So I have resumed the main concepts expressed here on this small list, in no particular order: keyboard/touchpad feel: I use vim so no need of moving mouse pointers that much, unless I am browsing the web, but intensive use of keyboard screen real state: again, terminal work for most of the time battery life: I think something very important weight/size: also very important looks not worth stealing it, don't give a shit if it is lost/stolen/broken: this may depend on kind of person, your economy, etc. Also to prevent losing work, I will upload EVERYTHING to the cloud whenever I'll have a chance. wifi: don't want to discover my wifi is one of those that cannot deal with half the routers on this planet or has poor connectivity. Thanks again for your answers and comments!

  Read the article

• Why is my model's scale changing after rotating it?

  - by justnS

  I have just started a simple flight simulator and have implemented Roll and pitch. In the beginning, testing went very well; however, after about 15-20 seconds of constantly moving the thumbsticks in a random or circular motion, my model's scale begins to grow. At first I thought the model was moving closer to the camera, but i set break points when it was happening and can confirm the translation of my orientation matrix remains 0,0,0. Is this a result of Gimbal Lock? Does anyone see an obvious error in my code below? public override void Draw( Matrix view, Matrix projection ) { Matrix[] transforms = new Matrix[Model.Bones.Count]; Model.CopyAbsoluteBoneTransformsTo( transforms ); Matrix translateMatrix = Matrix.Identity * Matrix.CreateFromAxisAngle( _orientation.Right, MathHelper.ToRadians( pitch ) ) * Matrix.CreateFromAxisAngle( _orientation.Down, MathHelper.ToRadians( roll ) ); _orientation *= translateMatrix; foreach ( ModelMesh mesh in Model.Meshes ) { foreach ( BasicEffect effect in mesh.Effects ) { effect.World = _orientation * transforms[mesh.ParentBone.Index]; effect.View = view; effect.Projection = projection; effect.EnableDefaultLighting(); } mesh.Draw(); } } public void Update( GamePadState gpState ) { roll = 5 * gpState.ThumbSticks.Left.X; pitch = 5 * gpState.ThumbSticks.Left.Y; }

  Read the article

• How to get started setting up IP security cameras

  - by dave

  I have just finished renovating my house. As part of the job, I have cat6 cable run through the house, including two external plugs. All cables terminate in the same location. My rough plan is to plug two IP cameras to monitor the front and rear, run POE from a central router to the two external cameras, plug my PC into the same router and run magic software X. Any machine plugged into the router or wirelessly connection should then be able to get a live feed and alerts based on motion detection. That's the plan, but I'm not sure how possible it is. What hardware to get and what monitoring software to get. Has anyone does something similar? What were your experiences?

  Read the article

• Help deciding on language for a complex desktop - web application

  - by user967834

  I'm about to start working on a fairly complex project needing a desktop GUI as well as a web interface and I need to decide on a language(s) to use. This is from an electrical engineering/robotics background. These are the requirements: Program will have to read data from multiple sensors and inputs (motion sensor, temperature sensor, capacitive sensor, infrared, magnetic sensors, etc) through a port on a computer - so either through USB or ethernet. Program will have to be able to send control signals based on this input. Program will have to continuously monitor all input signals at all times - so realtime data. Program will require authentication. Program will need to be controllable from a web interface from anywhere via logging in to a website. Web interface will also need to have realtime feedback once authenticated. What language do you think would best accomplish this? I was thinking maybe saving everything into a database which can be accessed by both the desktop and web app? And would Python be able to do all of this? Or something like a remote desktop app? I know this is a complex project but let's assume I can learn any language. Has anyone done something like this and if so how did you accomplish it?

  Read the article

< Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >