Search Results

Search found 1202 results on 49 pages for 'specs'.

Page 38/49 | < Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >

• hp DL380 G4 won't boot with disk plugged into front USB

  - by Kev

  We outgrew a few older external USB backup drives, and purchased WD My Passport 1 TB USB 3.0 drives to replace them. When they are plugged into the front of our G4, it will blink forever after the BIOS (which is current, BTW) and never boot, even though the USB disks are not "bootable" per se. Our old drives did not exhibit this behaviour (so I don't think it's this type of issue that I've read about other servers.) The old drives were USB 2.0, but this shouldn't make a difference, AFAICT--the specs say all of the G4's USB ports are the same, 2.0, anyway, so I'm not sure how one port would handle a USB 3.0 device better than another. If we plug the new drives in one of the back slots, it boots fine. What's the cause? My concern is that the front USB port, and possibly the motherboard, might be starting to die. (We are experiencing other strange issues with them, or were initially, like intermittent file permissions errors despite wide-open ACL on these local drives, but some serverfault users have me convinced they may be coincidental software/security related issues.)

  Read the article

• Windows is very slow with my new SSD

  - by Maksym H.

  I have a laptop HP probook 4520s with Core i5 M480 @ 2.67Ghz, 4Gb RAM, 640 GB HDD Radeon HD 6370m 1GB video card. It would seem like a good stack for work, right? But My HDD has crashed after everyday walking with laptop about 1 year. After buying my new SSD (Patriot memory - Torqx II 128 Gb SATA II) and installing new Windows 8 from scratch - it was amazing fast. But I had only install windows updates, and I feel that the speed become the same as my old HDD, after install other software for my work, it becomes so slow, so when I use my PC with old lower configuration and it really works better than my awesome laptop... I checked that TRIM and AHCI mode are turned on. So why's that? I asked for help in Patriot Memory support, they suggested to send them ATTO test results, done, sent. Here is the response: "Thank you very much for the attached results. Looking at the results, I can see that your SSD speed is a lot lower than it should be. Can you tell me your system specs?" Until they checked my email, I re-installed Windows 8 to Windows 7 and it was again perfect, but the story repeats it becomes slower and slower after every installing new software. Check out some screenshots.. (sorry for the screenshot with russian TaskManager, I hope you will recognize those parameters accordingly with your english or other lang TaskManager) So the main issue that something everytime loads the disc on 100% and the response time is jumping around 1000-3000 ms. Why am I asking about Windows? Because I tried to install Linux Mint (x86) and It just flies. So great performance independent on how many programs I have installed. Only Windows (any 7 or 8) has this problem. So guys, I appreciate any ideas about how to fix that and may be answers of main question - "why is it so.?" Thanks!

  Read the article

• Games, Windows 8.1 and 144Hz display

  - by Marioysikax

  So I have been having problems with few games after switching from 7 to 8.1, which seems to be related to my 144Hz monitor. Few examples: Shank, Shank 2, Blood of the Werewolf, Astebreed, the Sims 2 and Rayman Legends patch 1.2Had few other as well but it's been long and I have 600+ steam library. From those games at least the Sims 2 and Shank worked without any problems with same setup and Windows 7. So basically these games simply refuse to launch with basic setup. However if I plug 60Hz TV with HDMI instead everything magically starts to work. As for Astebreed and the Sims 2 using windowed mode seems to also work. As for Rayman Demo and version 1.0 works for some reason and 1.2 breaks settings menu. I have already tried contacting supports. EA support stated game simply shouldn't work with 8.1 at all (which is lie as it works with that TV and friend with 8 plays just fine), ubisoft support took few weeks and support said he will forward info for further processing, blood of the werewolf support had no idea what's going on and told me to just use my TV instead.Changing monitors refresh rate to 120Hz or forcing it to 60Hz doesn't do anything. I have DVI right now but I will try with DisplayPort when I get the cable. At PCGW Garrett said it may have something to do how listing resolutions work with 8 compared to earlier Windows versions but my googling skills don't bring anything up and compatibility mode for earlier windows version doesn't work either (not that I expected that to work). My system specs are on my steam profile. How do I get those work with my 144Hz monitor as well as possible future games having same problem? Downgrading to 7 would work but is far from practical and I don't own legit lisence for that one.

  Read the article

• Applications randomly alt-tab? (especially full screen games)

  - by Henry Scotts

  I'm not sure when this began, how it happens, or why it happens, but it is quite bothersome and apparently random. Just randomly throughout the day my computer will just go to the desktop. I could be in a full screen game and it will just immediately alt tab and present the desktop. Or I could be watching a movie and this happens. Sometimes it happens once every three hours and other times (just today actually) it did it twice in the span of 30 seconds. I am positive I am not pressing a hotkey because I launched a game, sat idle, and noticed it alt tab while cleaning up around my room after about 20 minutes. Sometimes it goes days without this happening. Specs: Windows 7 Ultimate 64 Bit, 10 gigs of RAM, GeForce GTX 260, Intel Xeon CPU. I also have basically nothing running when it happens other than the game and FireFox. My FireFox add-ons: Adblock Plus, Download Statusbar, Firebug, FirePHP, lazarus form recovery, tree-style-tabs, yslow. I doubt FireFox is causing the issue but I figured I'd include it anyway because it is the only application I have running when it happens. As for user processes I have running: VCDDaemon (context menu for virtual clone drive), razerhid (mouse), OSD, taskhost, dmw (desktop window manager), anyfullscreengame, audiorepeater, netsession_win, explorer, razerofa, tsvncache, firefox, plugin-container, and EKIJ5000MUI (printer). Whew. Okay. That was a lot of information. If someone could diagnose this I would be most grateful for this has been around with me for years.. Thanks for reading! PS: I doubt it's a virus because I never download illegal software and pretty much only browse Reddit and Stackexchange and play games. If it was a virus it would be a pretty lame one.. Hah..

  Read the article

• Attaching 3.5" desktop drive to MacBook SATA

  - by Kyle Cronin

  I have a mid-2007 MacBook that, according to the Apple Store, has suffered some liquid damage and requires a new logic board to operate correctly, a ~$750 repair I've been told (would normally be around ~$300 were it not for the "liquid damage"). The unit itself works fine - the only problem I've been having is that the system does not recognize the battery and will not charge it. Curiously, the system can still be powered by the battery and even recognizes when the power cord is detached by diming the backlight, but I digress. Now that this laptop will likely become a desktop, I'm wondering if it might be possible to attach a desktop drive. I recently purchased a 2TB SATA drive and I'm wondering if it's possible to somehow attach it where the current internal drive connects. Obviously the drive itself will not fit inside the device, but as the unit will spend the rest of its days on my desk, that's not really much of an issue. My main questions are: Is this possible? If so, how would I connect the drive? Would a SATA extender cable work? Is the SATA port on my MacBook capable of powering a desktop drive? Or should I just get a SATA male-to-female cable and see if I can power the drive through other means (a cheap power supply, for example) The disk I'm referring to is the Hitachi Deskstar HD32000. Though I couldn't find that exact model on Hitachi's support site, these are the power requirements for a similar drive, the 7K2000 (2TB, 7200RPM, SATA II): Power Requirement +5 VDC (+/-5%) +12 VDC (+/-10%) Startup current (A, max.) 1.2 (+5V), 2.0 (+12V) Idle (W) 7.5 From what I've read, 2.5" drives require 5V, meaning that my MacBook obviously is capable of producing it. The specs seem to suggest that this drive seems capable of accepting it instead of the typical 12V - is this an accurate interpretation of the power requirements? Or does it need both 12V and 5V?

  Read the article

• My Computer hangs for a few minutes just after startup, and then is fine.

  - by EvilChookie

  So I just built myself a reasonably beefy computer, and I installed Windows 7 on it. However, I start the machine up each morning and within a few minutes, the computer will semi hang. That is the mouse is responsive, and most of the time I can open task manager, or a new tab in Chrome. Occasionally windows will be labelled as 'Not responding'. Then, the machine will get over it's problem, and will be nice and quick until I turn it off. Here's my specs: CPU: AMD Phenom-II X4 955 Black (Quad Core, 3.2ghz) RAM: 4GB of DDR3 1300 MOBO: ASUS M4A785T-M (Latest BIOS) HARD DRIVES: 2x1TB Western Digital Caviar Blacks in RAID-0. OS: Windows 7 Ultimate x64. GPU: ASUS GT240 1GB. I believe this issue relates to the RAID array, as I didn't have the lockup problem before I created the array. I purchased a second drive and reformatted after creating a RAID array, since the single drive was a little on the pokey side (compared to the rest of the computer). What I have tried: Updated Raid Drivers Malware checks Windows Updates Unecessary Services CPU and Disk activity appears to be low (via Resource Monitor) No strange errors in the error log. Any thoughts?

  Read the article

• Best video codec to store my own collection

  - by Jack

  Hello! I think this question has already been asked but with different flavours. My problem resised in the fact that my camera (Canon G9) creates video with almost raw codec (I think it's plain old MPEG) so a 10 minutes video is almost 900mb. I would like to convert them in a format that has a good trade-off between space and quality, but I would prefer having the quality as good as the original (of course this is not possible because of lossy compression) just saving as much space is possible with a minimal lose of quality. Which codec should I look for? H264? It seems to be the champion of the moment.. otherwise which other ones could I try? XviD? Which parameters should I use? I mean how many kbits/s is a fair good bitrate to keep high quality? And what about audio codec? video specs are 640x480 at 30fps or 1024x768 at 15fps.. thanks in advance!

  Read the article

• MySQL is killing the server IO.

  - by OneOfOne

  I manage a fairly large/busy vBulletin forums (running on gigenet cloud), the database is ~ 10 GB (~9 milion posts, ~60 queries per second), lately MySQL have been grinding the disk like there's no tomorrow according to iotop and slowing the site. The last idea I can think of is using replication, but I'm not sure how much that would help and worried about database sync. I'm out of ideas, any tips on how to improve the situation would be highly appreciated. Specs : Debian Lenny 64bit ~12Ghz (6 cores) CPU, 7520gb RAM, 160gb disk. Kernel : 2.6.32-4-amd64 mysqld Ver 5.1.54-0.dotdeb.0 for debian-linux-gnu on x86_64 ((Debian)) Other software: vBulletin 3.8.4 memcached 1.2.2 PHP 5.3.5-0.dotdeb.0 (fpm-fcgi) (built: Jan 7 2011 00:07:27) lighttpd/1.4.28 (ssl) - a light and fast webserver PHP and vBulletin are configured to use memcached. MySQL Settings : [mysqld] key_buffer = 128M max_allowed_packet = 16M thread_cache_size = 8 myisam-recover = BACKUP max_connections = 1024 query_cache_limit = 2M query_cache_size = 128M expire_logs_days = 10 max_binlog_size = 100M key_buffer_size = 128M join_buffer_size = 8M tmp_table_size = 16M max_heap_table_size = 16M table_cache = 96 Other : > vmstat procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 9 0 73140 36336 8968 1859160 0 0 42 15 3 2 6 1 89 5 > /etc/init.d/mysql status Threads: 49 Questions: 252139 Slow queries: 164 Opens: 53573 Flush tables: 1 Open tables: 337 Queries per second avg: 61.302. Edit Additional info.

  Read the article

• GA 8KNXP Rev1.0: 4GB installed, only 3.5 recognized by BIOS

  - by hurikhan77

  I've installed 2x 1 GB and 4x 512 MB memory into my GA-8KNXP system which would sum up to 4GB. The specs from the manual say: Maximum memory support: 4GB. If all six slots are utilized, slot 5+6 may only equipped with single-sided RAM modules. And so I did. Anyway: The BIOS counts up to 3.5 GB and finishes there. Also my linux system reports only 3.5 GB of memory although 4 GB memory support is activated in the kernel. So I suppose this is a memory mapping issue or a hardware issue. I've tried removing only on of the 512 MB memory modules leaving 5 modules in place. But that just stopped the system from powering on correctly (screen stays black although fans and leds come to live). Dual Channel was detected and enabled so the system technically found all 6 modules. "dmidecode" in linux reports only memory in slots 1 to 4 and ignores slots 5+6, so it only detects 3 GB of memory. It also says the system would support up to 16 GB of memory with 4 GB modules per slot. I think technically the chipset should be able to offer and utilize the complete 4 GB memory range. Any clues what else I could check? Or do I have just to live with 0.5 GB wasted memory?

  Read the article

• Memory modules not running at rated speeds.

  - by Wesley

  Hi all, I'm having some odd memory issues with my build. Here are my specs right now: QDI Superb 4 motherboard Intel Pentium 4 Northwood 2.4GHz (512KB L2, 533MHz FSB) 3x 256MB PC2100 DDR266 RAM 16MB NVIDIA TNT2 Pro AGP Seagate 80GB IDE HDD Generic USB 2.0 PCI Generic Modem PCI Bestec 250W PSU To be even more specific, here are the current brands and models of each module: Kingston KVR266X64C25/256 Samsung PC2100U-25331-Z SMART SM5643285D4N0CHM0H Supposedly, they are all PC2100 266MHz modules with a latency of 2.5. Looking in Speccy, the Kingston module is somehow running at a speed of PC2300 ~284MHz. I've never overclocked RAM at all as I don't know how to. However, when I first started the computer, I had the SMART module in place first and then reset the BIOS settings, including the integrated overclocking options. However, this still doesn't explain why the Kingston module runs at a higher speed than the SMART and Samsung module. Why is it like this? On a side note, where could I find the motherboard manual for the QDI Superb 4? Thanks in advance.

  Read the article

• Codecs, Premiere Pro & Quicktime: Import or Play Error

  - by Nchpmn

  Original Question I've been using a FS-H200 (not the Pro variant) recorder with a JVC ProHD camera. I have been shooting with the DTE FORMAT to Quicktime (.mov). I copied the files to an external hard drive and am now trying to edit. The files will play back in VLC, as they would be expected to. However they will not import into Adobe Premiere CS5.5, instead giving an error: Unsupported format or damaged file. Quicktime gives the following error when attempting to play the files: Error -2002: a bad public movie atom was found in the movie (Filename) To try and fix this, I have installed the following codec packs: K-Lite Codec Pack 64-bit Full (version 5.9, latest) K-Lite Codec Pack 32-bit Full (version 8.4, latest) MainConcept Codec Suite (Broadcast) v5.1 for Adobe CS5 Reinstalled Quicktime with new download from Apple The same errors and problems still exist. From this I can assume that there is an issue with Quicktime and that is what Premiere is using as an encoder/decoder for the codec. Is there any way to fix this? From looking at the "Codec Information" from VLC: Stream 0 Type: Video Codec: MPEG-1/2 (mpgv) Language: English Resolution: 1280 x 720 Frame Rate: 25 Stream 1 Type: Audio Codec: PCM S16 BE (twos) Language: English Channels: Stereo Sample Rate: 48000 Hz Bits per sample: 16 Other computer specs: Windows 7 Professional 64-bit (SP1) Gigabyte Z68X-UD3-B3 Intel i7-2600K 16GB DDR3 2TB WD 7200RPM SATA 6Gb/s LaCie d2 Quadra 2TB v3 7200RPM (External HDD) NVIDIA GeForce GTX 560 Ti Golden Sample Updates 2012-03-11 @ 2050 AEDT MPEG Steamclip doesn't recognise, play or convert the footage. File open error: unrecognised file type. [Open Anyway] File open error: can't find video or audio tracks. 2012-03-24 @ 1920 AEDT Had to transcode the footage. :(

  Read the article

• Graphics Artifacts/ Texture Flickering

  - by Cerin

  Hey I been having some problems with artifacts in games. Sometimes textures flicker. Artifacts of various shapes and sizes show up usually after a couple games of dota 2. I built my computer almost exactly one month ago and it has been doing this pretty much from the start except before the artifacts I believe just flashed on screen fast enough to where I couldn't tell what it was but I still noticed. In dota I've seen green triangular artifacts among other things. I've tried running Furmark for a while but even though it pushes the gpu much harder than dota 2, there are still no artifacts. It maxes in furmark at about 60C and running every game I've tried on it at 40C. CPU and system temp don't usually get higher than 40C either. These are my system specs: Gigabyte Z68 Intel Motherboard 16 GB Gskill Ripjaws SDRAM DDR3 Sapphire Radeon HD 7770 GHz edition Intel Core i5-2500k (with built in gpu) Corsair 750 Watt PSU windows 7-64 bit I have the latest drivers for everything. What should I do about this? Try to RMA my graphics card? Are there other things that could be causing this?

  Read the article

• Computer sponteously reboots when doing heavy file copy to/from disk

  - by Mark Hosang

  I've been fighting with this problem for the last 3 weeks where my machine will just instantly reboot. No BSOD, and when i checked the event log all that was reported was the generic "Kernal-power" error with the detailed information pointing to a hard crash. This is a machine that was working for 18 months before these crashes started happening. When they started happening is after I added 3 HDs in a RAID-5, upped the memory to 12gb, moved to a new house, added a SSD and added about 5 case fans. I have thus eliminated the RAID, and determined that the SSD was not the cause (because it was still crashing even though the ssd wasn't connected). I've run memtest several times over night with no memory problems showing up. I've run IntelBurnTest to max out the cpu to see if it was a heat issue and at full tilt after 20 min it was only at 85C and the machine didn't crash. I also took a look at the voltages during this test, with a screenshot at the bottom of this post I've ruled out a software issue by reinstalling windows 7 ultimate x64 a total of 5 times, but even during that the install it crashes. Happens sometime during file copying at the beginning, or during uncompressing files, or sometimes during running windows update. The only discernible pattern i can see is that it seems to crash when hard disks might be spinning up or when they are accessed heavily from large file transfers. My current guess is that it is probably an issue with the MB, PSU or the power coming through the outlet. Any suggestions of what i could try to troubleshoot or what may be wrong? Specs PSU: Seasonic M12 700w Mem: 12gb CPU: i7-920 with stock heatsink MB: Asus P6T HDs: 3 green WD and 1 Corsair force 3 120b with 1.3.3 firmware Running full tilt voltages Idling Voltages

  Read the article

• Synchronize two directories on linux pc

  - by Gab

  I need a distributed filesystem (or a synchronization tool) that is capable of keeping a directory synchronized across 4 pc. My requirements are: offline access (data must be available offline on each pc) preserve execution rights: some files are marked executable on a linux partition. This flag should be replicated. efficient sync strategy: some of my files are 20GB, they are changed quite often, but in very little parts (Virtualbox images). Delta transmissions are welcome. efficient handling of space: no history for files, files shouldn't be copied to temp directories "just in case you break it". it must propagate deletions of files modification can happen in any of the 4 pcs, they should be propagated when other pc are connected. Other specs of my solution are: Sync is over a lan, the total amount of data to be synced is around 180GB, in some ten thousand files. Changes are small, but can happen in big files. At the moment i'm interested in a linux only solution. conflicts either don't happen or are solved with "last one wins" I haven't found any good solution. I've been trying: unison: it is the only one working at the moment, but during the hashing phase it hangs my pc for some minute, disk light steady on. Sparkleshare doesn't handle large files nicely. It keeps an history of all your changes that grows up indefinitely. They promise it will be fixed in next releases, but at the moment it still doesn't fit my needs. owncloud (keeps history of each file i change) coda ? (help! i couldn't set it up correctly!) git-annex assistant transforms all your files in symlinks and mark the original file as read only ("just in case you make a mistake while you modify it"!). Before you edit a file you have to issue a special command "git-annex unlock", that creates a local copy of the file, and you have to remember to lock it again if you want it synchronized. What to try next?

  Read the article

• HP Photosmart C4780 printer/scanner breaks netgear WNDR3700v3 router on connection

  - by CodeJunkie

  A few months ago, we upgraded our Netgear router's firmware. Immediately, we started having trouble connecting to the internet. Each time this problem would happen, every device in the house would stop being able to make new connections to the internet. For example, you couldn't open new pages in the browser, but if Skype was running when the problem happened, you could keep talking to people. The only solution to this problem seemed to be resetting the router to factory defaults. Eventually, we solved this problem by just downgrading the router firmware. A while later, we got a new Netgear router. Almost right away, the new router started having exactly the same problems as the old one did on current firmware. The network connection would stay active and the computer would say it had an internet connection, but you couldn't do anything online except for using Skype. We eventually figured out that this happens every time our HP printer gets onto the network. Any time the printer gets onto the wireless network, the whole network stops connecting to the internet almost completely. The only thing that will fix it at that point is to reset the router to factory specs, and unplug the printer so it can't get back onto the network. The Netgear router has the latest version of the firmware, but the printer/scanner is very old. It looks to me like this problem is probably a result of a firmware conflict between the printer and the router, but I'm not sure how to fix that problem. Here's some additional information: Printer: HP Photosmart C4780 Router: WNDR3700v3 Router firmware: V1.0.0.22_1.0.17 (Stock, up to date firmware) Why would the printer getting on the network cause the router to not be able to access the internet correctly until it was reset? What can be done to allow the printer to be on the network without breaking the network for all other devices? Edit: One other thing that happens during this internet problem is that multiple computers in the house display an "IP conflict" message repeatedly, and extremely frequently (as often as every five to ten minutes, and every time a connection to the wireless is made).

  Read the article

• Server Recovery from Denial of Service

  - by JMC

  I'm looking at a server that might be misconfigured to handle Denial of Service. The database was knocked offline after the attack, and was unable to restart itself after it failed to restart when the attack subsided. Details of the Attack: The Attacker either intentionally or unintentionally sent 1000's of search queries using the applications search query url within a couple of seconds. It looks like the server was overwhelmed and it caused the database to log this message: Server Specs: 1.5GB of dedicated memory Are there any obvious mis-configurations here that I'm missing? **mysql.log** 121118 20:28:54 mysqld_safe Number of processes running now: 0 121118 20:28:54 mysqld_safe mysqld restarted 121118 20:28:55 [Warning] option 'slow_query_log': boolean value '/var/log/mysqld.slow.log' wasn't recognized. Set to OFF. 121118 20:28:55 [Note] Plugin 'FEDERATED' is disabled. 121118 20:28:55 InnoDB: The InnoDB memory heap is disabled 121118 20:28:55 InnoDB: Mutexes and rw_locks use GCC atomic builtins 121118 20:28:55 InnoDB: Compressed tables use zlib 1.2.3 121118 20:28:55 InnoDB: Using Linux native AIO 121118 20:28:55 InnoDB: Initializing buffer pool, size = 512.0M InnoDB: mmap(549453824 bytes) failed; errno 12 121118 20:28:55 InnoDB: Completed initialization of buffer pool 121118 20:28:55 InnoDB: Fatal error: cannot allocate memory for the buffer pool 121118 20:28:55 [ERROR] Plugin 'InnoDB' init function returned error. 121118 20:28:55 [ERROR] Plugin 'InnoDB' registration as a STORAGE ENGINE failed. 121118 20:28:55 [ERROR] Unknown/unsupported storage engine: InnoDB 121118 20:28:55 [ERROR] Aborting **ulimit -a** core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited scheduling priority (-e) 0 file size (blocks, -f) unlimited pending signals (-i) 13089 max locked memory (kbytes, -l) 64 max memory size (kbytes, -m) unlimited open files (-n) 1024 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 real-time priority (-r) 0 stack size (kbytes, -s) 8192 cpu time (seconds, -t) unlimited max user processes (-u) 1024 virtual memory (kbytes, -v) unlimited file locks (-x) unlimited **httpd.conf** StartServers 10 MinSpareServers 8 MaxSpareServers 12 ServerLimit 256 MaxClients 256 MaxRequestsPerChild 4000 **my.cnf** innodb_buffer_pool_size=512M # Increase Innodb Thread Concurrency = 2 * [numberofCPUs] + 2 innodb_thread_concurrency=4 # Set Table Cache table_cache=512 # Set Query Cache_Size query_cache_size=64M query_cache_limit=2M # A sort buffer is used for optimizing sorting sort_buffer_size=8M # Log slow queries slow_query_log=/var/log/mysqld.slow.log long_query_time=2 #performance_tweak join_buffer_size=2M **php.ini** memory_limit = 128M post_max_size = 8M

  Read the article

• Getting prompted for password accessing page through script even when client and server are in same

  - by Munawar

  I'm trying to pull up an internal webpage in automated fashion using the methods in 'Internetexplorer.Application' using vbscript. But I'm getting prompted for password, although the client and the server both are in the same domain. Predictably when I manually try to access the web page, I don't have any problem. Only when I try using cscript.exe or iexplore.exe, I get prompted. I'm trying to automate some of the smoke test we do after a new build is deployed. But this password prompt is getting in the way. Following are the system specs Client machine - IE 7.0, OS is Windows server 2003 Server machine - Windows Server 2008 Both are in the same domain. So far I've unsuccessfully tried following to automate the password input system.diagnostics.process.start var WinHttpReq = new ActiveXObject("WinHttp.WinHttpRequest.5.1"); WinHttpReq.Open("GET", "http://website", false); WinHttpReq.SetCredentials("username", "password", 0); Nothing seems to work I checked in IIS. we have only anonymous and forms authentication enabled Is there any configuration setting in the client machine that can be tweaked to bypass this, although I'd hate to do it since you step on the toes of twenty people trying to do that. Preferable way would be to programmatically input it if its possible. Also, if you can suggest a more appropriate forum, that'd be great too. Please help.

  Read the article

• keyboard intermittently stops working, even after reinstalling windows 7; possibly a Chrome issue?

  - by neverskipbreakfast

  My keyboard intermittently stops working. Sometimes a couple of keys will work, but usually none. Sometimes if I mash a couple of the ctrl+alt+windows type keys randomly for a bit, the keyboard will let me type one more letter before stopping again. Sometimes the keys will open a program menu, but usually not. I have even completely wiped my machine and reinstalled windows 7; the problem continues. Specs: Intel iMac (early 2006, 2.0GHz, 2MB RAM, 240GB HD) running ONLY Windows 7 Professional, 32-bit (NOT through boot camp) and using a USB keyboard (Saitek Eclipse II.) *Unplugging & reconnecting keyboard does NOT fix it. *Connecting a different keyboard does NOT fix it. That one won't work, either. *Drivers are up-to-date. Removing and reinstalling drivers does NOT fix it. *Restarting the computer does NOT fix it. In fact, when the Windows logon screen appears, they keyboard won't work, and neither will the icon to pull up the on-screen keyboard. Otherwise my mouse can click around just fine. I can only log onto a non-password protected account. *Generally, logging into as different Windows user fixes it. I can then log back on to my main user account and continue work for a few hours until it happens again. *Clearing my Chrome browsing data stopped the problem from recurring for a week or so. *I use Avira free antivirus software, and repeated scans turn up nothing fishy. *I have already REINSTALLED Windows 7 (not just a restore.) The problem returned after 2 days of use. The only thing I suspect is something in Google Chrome -- I used my google account to reload all my previous Chrome extensions, saved data, etc. (Chrome Extensions Installed: AdBlock, Better Google Tasks, DropBox, FB Photo Zoom, Google Mail Checker, StayFocusd.) Any ideas? Any at all?

  Read the article

• Switching from Onboard intel to Nvidia Dedicated GPU

  - by Anarkie

  How can I switch from Intel onboard grpahics to Nvidia Dedicated GPU? When I go to windows screen resolution I see intel. I cant change it. I go to Device Manager, I see both Adapters are there and Nvidia is known.I disabled intel, I didnt see any option to set one as primary so I disabled intel, black screen!Reboot and re-enable intel. I right click on the desktop, choose "Nvidia Control Panel" and on 3D options I chose the desired game I want to play, High performance Nvidia, but it didnt switch when I started the game. Then I made preferred GPU in the global settings High performance Nvidia for everything it still didnt change.I understand to save the battery etc. there is a switch option between these two but I dont see this switch when it is necessary, I cant also switch manually?Is there a manual switch FN key?I looked but couldnt find. Why I want to do this? 1) Better game peformance. 2) I want to play an old game from 2002(Diablo 2 LOD), when I start the game there are black bars on the sides, so screen becomes just smaller which I dislike!I heard this is intel's specification to center the display.But instead I would like to scale or expand it to fit widescreen(fullscreen).Which should be possible with Nvidia. My Notebook Specs: Fujitsu Lifebook AH531, Win7 , 64 bit, i5, intel HD graphics onboard, Nvidia GT 525. I didnt install Nvidia later, it was always installed and ready from the moment I turned on the computer first time. How I determined that the cards werent switched when I am playing the game: with the windows key I exited from the game, then looked at screen resolutions menu, still saw intel, also the game was still with black bars.I know intel GPU should enough for Diablo 2 but I am interested in this answer for further games, I dont always play Diablo, what if I install an up to date game for example?Then Intel will not be sufficient.I would like to learn the switch option.

  Read the article

• What is the max supported number of SATA devices (using cable adapters) on a Dell SAS 6/iR adapter?

  - by Zac B

  I've got a Dell SAS 6/iR PCI-E adapter. I don't have a multiplier backplane. I'm planning on connecting SATA (non SAS) drives. If I buy cable adapters only (ones that split a SAS connector on the card to a certain number of SATA cables), how many drives can I connect to this card? The way I see it, there are two limitations: a limitation imposed by the theoretical max number of devices supported on the card (which I've dug through the specs to find, but haven't seen yet), and a limitation imposed by the number of SAS plugs on the card multiplied by the number of SATA cables that come out of the highest-multiplying splitter I can buy. The answer to my question would be the minimum of those two limitations. I've seen 4x SATA coming out of some splitters; are there any that have more? Alternatively, if this is an RTFM question, does anyone have a good link to a "this is how SAS works, this is how you figure out the max number of devices, and this is how the concepts of 'ports', 'lanes', 'endpoint devices', and 'connectors' all relate in SAS-land" document? I've looked around on the Dell docs, but haven't found anything that explains this to someone at my level of understanding of SAN/enterprise storage technologies. Cheers!

  Read the article

• mplayer (mplayerhq.hu) repeats ending audio frames

  - by kamikatze

  mplayer (from mplayerhq.hu) on windows repeats the last few audio frames upon exit. When the video ends, before you can see Exiting... (End of file) in the command prompt, you will hear the last 1/2 second or so of the audio track again. This behavior is the same for multiple containers/codecs/soundcards Vista or Windows 7. Is there a workaround for this? My playback specs: MPlayer Sherpya-MT-SVN-r31027-4.2.5 (C) 2000-2010 MPlayer Team 150 audio & 343 video codecs Playing splash_final.wmv. ASF file format detected. [asfheader] Audio stream found, -aid 1 [asfheader] Video stream found, -vid 2 VIDEO: [WMV3] 1280x720 24bpp 1000.000 fps 6291.5 kbps (768.0 kbyte/s) ========================================================================== Opening video decoder: [dmo] DMO video codecs DMO dll supports VO Optimizations 0 1 DMO dll might use previous sample when requested Decoder supports the following formats: YV12 YUY2 UYVY YVYU RGB8 [..] Decoder is capable of YUV output (flags 0x1b) Movie-Aspect is undefined - no prescaling applied. VO: [directx] 1280x720 = 1280x720 Planar YV12 Selected video codec: [wmv9dmo] vfm: dmo (Windows Media Video 9 DMO) ========================================================================== ========================================================================== Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders AUDIO: 44100 Hz, 2 ch, s16le, 329.8 kbit/23.37% (ratio: 41221-176400) Selected audio codec: [ffwmav2] afm: ffmpeg (DivX audio v2 (FFmpeg)) ========================================================================== AO: [dsound] 44100Hz 2ch s16le (2 bytes per sample) Starting playback...

  Read the article

• Is this way of using Excel 2007 Pivot table for BI scalable ?

  - by Sim

  Hi all, Background: We need to consolidate sales data across the country to do analysis Our Internet connection/IT expertise/IT investment is not quite strong, therefore full BI solution is out of question I tried several SaaS BI solution (GoodData, ZohoReports) and while they're good, they seem not to fully support what we need We're looking at 'bout 2 millions record for every 2 months My current approach Our (10) sites currently gathers data from all their branches and consolidate them into 1 Excel file with Pivot table and embed source data In HQ, I will request 10 sites to send back those Excel files periodically We will import those Excel to our MSSQL server There will be a master Excel file, that will also have the same pivot table (as those came from site Excel file), and datasource is the MSSQL server More details For testing, I currently use MSSQL 2008 Express on my laptop So far, I imported our transactions for the past 2 months and there are 2 millions+ row in 1 table in MSSQL (we just use 1 table, corresponding to our common pivot table structure). DB size is ~ 600 MB In the master Excel file, if not including the source data, it's just < 10MB. Including the source data will increase the size to 60 MB (so I supposed Office 2007 automatically zip the data ?) I try using the Pivot (drag-and-drop fields) and the performance so far is OK (my laptop specs: C2D T7200, 3GB RAM, Windows XP) So my question is : If we're looking at full year transaction (roughly 15 millions rows in MSSQL 2008 Express, 3.6 GB in size), is there any issue with that 15 million rows in 1 table in SQL Express ? Is there any performance issue with the pivot table at that time ? Can it still embed the source data ? (I google-ed but didn't find the maximum size of source data Excel 2007 can embed) Any other suggestions on how we can better do this ? Given that we can't afford the full BI solution, any light-weight/budget/SaaS BI that you can recommend ? Thanks

  Read the article

• DVI splitter not working as expected/confusion between DVI-D and -I

  - by Freakishly

  Hey guys, thanks for looking. I have an ATI FirePro™ V3700 in my desktop machine, and I have been running a dual-monitor setup quite effortlessly, thanks to the two DVI ports on the card. I came upon a third monitor, and wanted to extend my desktop to 3 screens, so I purchased a DVI splitter from Amazon. Now, I can only duplicate the second monitor onto the third, not extend it. I've tried all possible combinations of input to no avail. Here's the setup: The ATI FirePro™ V3700 has two Dual-Link DVI-I outputs The splitter splits a single Dual-Link DVI-I port into two Dual-Link DVI-I outputs Two of the monitors are NEC E222W, and the third monitor is a Dell 2001FP. Each monitor has one D-Sub and one Dual-Link DVI-D input. Cables going from the video card to the monitors are two Dual-Link DVI-D to the NECs and one Single-Link DVI-D to the Dell. Is the problem likely with the DVI-D/DVI-I mismatch? Or is it with the cable on the Dell that is only a Single-Link? The cables are easily replaceable, the monitors not so much. Thanks for your time, I really appreciate it. http://www.amd.com/us/products/workstation/graphics/ati-firepro-3d/v3700/Pages/v3700-specs.aspx http://www.amazon.com/Cables-Unlimited-DVI-D-Splitter-PCM-2260/product-reviews/B000H09RFM/ref=dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1 www dot newegg dot com/Product/Product.aspx?Item=N82E16824002495 accessories dot us dot dell dot com/sna/PopupProductDetail.aspx?cs=19&l=en&c=us&sku=320-1578 Apologies for the fudged links, I'm new here and they won't let me post more than two :P

  Read the article

• Computer crashes if left unattended AND running uTorrent, what could be?

  - by DiegoDD

  I have a weird problem in which, if I leave my computer unattended, AND I leave uTorrent open, downloading/seeding, the computer simply crashes after about 20 / 30 minutes (don't know exactly since if I leave it, and come back later, it has already restarted or has a BSOD.) If I leave the computer alone for undefined time WITHOUT uTorrent, nothing happens, and if I am constantly using the computer while using uTorrent, no problem either (I could be using it all day with uT open and it doesn't crash). So what could it be that the combination of those cases makes the computer crash? I have already checked the power management so the computer never enters stand by mode, sleep, hibernate, etc. (the only thing I do is turn off the display). A first guess is that maybe one of my external hard drives DO sleep or enters in a "low power" mode or something if I don't use the PC. but since uT is running MAYBE tries to use that drive, and makes it crash. Could that be possible? How to know for sure if the external drive does that, and to prevent it from doing so. Any more ideas of what may be causing that? Specs: Windows 7 Pro, 64-bit, 2 GB RAM. Latest version of uTorrent (although it has been happening for a while now). UPDATE: i just found out that uTorrent has Disk cache options ( preferences - advanced - disk cache ). I have no idea if that may be causing problems with my external drive, hence causing the crash.

  Read the article

• AGP 4x slot running at 2x

  - by Wesley

  Hi all, Here are the specs of the machine related to this question: AMD Athlon XP 2400+ @ 2 GHz / 2x 512MB PC3200 DDR RAM / 3D Fuzion 128MB GeForce 6200 AGP / WD 160GB IDE HDD / FIC AM37 (mobo) / Codegen 350W PSU / Windows XP Pro SP3 So, for some odd reason, the GeForce 6200 that is in the AGP 4x slot is not running at 4x, but 2x. The card itself supports AGP 4x and even 8x. When I enter the BIOS, the options for the AGP slot only allow 2x as the max. Before, the max option for the AGP slot in the BIOS was 4x. (I do get the 4x option after I reset CMOS, but it does not stick after a restart.) I don't exactly know what the problem could be, but a few weeks ago, this machine's hard drive was reformatted and got a fresh install of XP. Also, I did install Rivatuner, but I never overclocked it at all. (I uninstalled it after thinking that it had done something.) Otherwise, I cannot figure out the cause of the problem. Does anybody have an idea why this is happening? (Would I have to do another reformat?) Thanks in advance. PS: the other options for the AGP slot are aperture size (which I tried changing, but it did nothing) and FastWrite (enabled by default).

  Read the article

< Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >