Search Results

Search found 18379 results on 736 pages for 'output buffering'.

Page 381/736 | < Previous Page | 377 378 379 380 381 382 383 384 385 386 387 388  | Next Page >

• Local Area Connection in Slacware 13

  - by asdasd

  I have windows xp and slackware 13 on one computer, and the ISP provided me a new modem. There was manual how to configure it, so i start the web browser and typed it's ip address 192.168.1.1 and the web interface of the modem appeared so i logged in, that was easy. But under slackware, i don't know how to enter in the modem config / web interface. I type in 192.168.1.1 but it's not working. Here's the output of ifconfig eth0 : eth0 Link encap:Ethernet HWaddr 00:a1:b0:01:18:28 inet addr:169.254.73.8 Bcast:169.254.255.255 Mask:255.255.0.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:17 Memory:febff400-febff4ff How can i log in into the modem from linux, i.e. find it's assigned ip under slackware ? Thank you.

  Read the article

• How to get which file is requested to open using a mac application?

  - by ramsey

  i have created an mac application which can be open my file extensions. But when i tested it, i dont get the path of the file requested to open using the application, instead i got the "psn_0_151589". I checked it for itunes, textedit, xcode and other applications. Below is my app sample main code where i process path of the opened file python code import sys import os.path print("File opened with this app :: ",sys.argv[1]) if(os.path.exists(sys.argv[1]): print("valid file :: { do something...}\n") else: print("Invalid file path received :: { do nothing }\n") OUTPUT : File opened with this app :: psn_0_151589 Invalid file path received :: { do nothing } Hope someone knows how to get the filepath which was opened using any application. Any help would be greatly appreciated. -ramsey

  Read the article

• Hypertransport sync flood error

  - by Carl B

  What is it? And what causes it? Is it only for uncorrectable DIMM Errors(Troubleshooting DIMM errors)? When an UCE occurs, the memory controller causes an immediate reboot of the system. During reboot, the BIOS checks the Machine Check registers and determines that the previous reboot was due to an UCE, then reports this in POST after the memtest stage: A Hypertransport Sync Flood occurred on last boot 3 BIOS reports this event in the service processor’s system event log (SEL) as shown in the sample IPMItool output There are what seems to be some suggested answers to include Bad Caps Bios verisons (happens in one version not the other) Graphics card issues Lack of power to the CPU The list of possible generators seems to target everything but the computer case. System Specs: Windows Home Premium 64 Motherboard - MSI790FX-GD70 (MS7577) / Bios v 1.9 (American Megatrensa Inc) Ram - Patriot G Series ‘Sector 5’ Edition 4GB DDR3 1600 CPU - AMD Phenom II X2 555 Black Edition Callisto 3.2GHz Socket AM3 80W (Note: unlocked 2 cores CPU Z ids it as phenom II x4 B55) Graphics - 2 x Radeon 5750 in crossfire PSU - ABS 900w HDDs - 2 Seagate 1.5 TB Sata SSD - 1 OCZ 120 GB Vertex Plus R2

  Read the article

• Have to run sudo dhclient eth0 automatically every boot

  - by Fyksen

  I just installed ubuntu 12.04.1 alternative install (for raid 0 on some disks). I Have some problems with the net. I'm at school, we use cable, and it got IPv6. If I run ifconfig eth0 heres my output: eth0 Link encap:Ethernet HWaddr e0:cb:4e:87:ff:db inet addr:128.39.194.217 Bcast:128.39.194.223 Mask:255.255.255.224 inet6 addr: 2001:700:1100:8008:e2cb:4eff:fe87:ffdb/64 Scope:Global inet6 addr: fe80::e2cb:4eff:fe87:ffdb/64 Scope:Link inet6 addr: 2001:700:1100:8008:48f7:c23:1d87:da6c/64 Scope:Global UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1063378 errors:0 dropped:0 overruns:0 frame:0 TX packets:489811 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1577173461 (1.5 GB) TX bytes:37043669 (37.0 MB) Interrupt:68 Base address:0x6000 My /etc/network/interfaces look like this: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 # NetworkManager#iface eth0 inet dhcp # NetworkManager#hostname 2001:700:1100:1::4 # This is an autoconfigured IPv6 interface iface eth0 inet6 auto (I had to remove the hash tags, because of the BIGFONT i get on ask ubuntu) The "network manager" says that I'm not connected. Let me know if you need any more information. :)

  Read the article

• Launching php script through comman line - keeping terminal window open after execution

  - by somethis

  Oh, my girlfriend really likes it when I launch php scripts! There's something special about them, she says ... Thus, I coded this script to run throught the CLI (Command Line Interface) - so it's running locally, not on a web server. It launches just fine through right click open run in terminal but closes right after execution. **Is there a way to keep the terminal window open? Of course I can launch it through a terminal window - which would stay open - but I'm looking for a one click action. With bash scripts I use $SHELL but that didn't work (see code below). So far, the only thing I came up with is sleep(10); which gives me 10 seconds for my girl to check the output. I'd rather close the terminal window manually, though. #!/usr/bin/php -q <?php echo "Hello World \n"; # wait before closing terminal window sleep(10); # the following line doesn't work $SHELL; ?> (PHP 5.4.6-1ubuntu1.2 (cli) (built: Mar 11 2013 14:57:54) Copyright (c) 1997-2012 The PHP Group Zend Engine v2.4.0, Copyright (c) 1998-2012 Zend Technologies )

  Read the article

• Error when running debuild on package source

  - by Chris Wilson

  I'm attempting to build the squeak-vm source but am getting an error every time I do so. The output is: dpkg-buildpackage -rfakeroot -D -us -uc dpkg-buildpackage: export CFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export CPPFLAGS from dpkg-buildflags (origin: vendor): dpkg-buildpackage: export CXXFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export FFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export LDFLAGS from dpkg-buildflags (origin: vendor): -Wl,-Bsymbolic-functions dpkg-buildpackage: source package squeak-vm dpkg-buildpackage: source version 1:4.0.3.2202-2 dpkg-buildpackage: source changed by José L. Redrejo Rodríguez <[email protected]> dpkg-source --before-build squeak-vm-4.0.3.2202 dpkg-buildpackage: host architecture i386 fakeroot debian/rules clean dh_testdir dh_testroot rm -f build-stamp configure-stamp rm -f unix/cmake/config.sub unix/cmake/config.guess /usr/bin/make -f debian/rules unpatch make[1]: Entering directory `/home/notgary/Projects/squeak/squeak-vm-4.0.3.2202' QUILT_PATCHES=debian/patches \ quilt --quiltrc /dev/null pop -a -R || test $? = 2 Patch linex.patch does not remove cleanly (refresh it or enforce with -f) make[1]: *** [unpatch] Error 1 make[1]: Leaving directory `/home/notgary/Projects/squeak/squeak-vm-4.0.3.2202' make: *** [clean] Error 2 dpkg-buildpackage: error: fakeroot debian/rules clean gave error exit status 2 debuild: fatal error at line 1337: dpkg-buildpackage -rfakeroot -D -us -uc failed

  Read the article

• CentOS Insufficient space in download directory /var/cache/yum/base/packages

  - by Joao Heleno

  Hello! I was trying to yum install libpcap when I got Error Downloading Packages: 14:libpcap-0.9.4-15.el5.i386: Insufficient space in download directory /var/cache/yum/base/packages * free 0 * needed 108 k Here's output from df -h: Filesystem Size Used Avail Use% Mounted on /dev/sda1 20G 19G 0 100% / /dev/sda3 202G 38G 154G 20% /home tmpfs 1.5G 0 1.5G 0% /dev/shm And fdisk -l: Disk /dev/sda: 250.0 GB, 250000000000 bytes 255 heads, 63 sectors/track, 30394 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 2611 20972826 83 Linux /dev/sda2 2612 3251 5140800 82 Linux swap / Solaris /dev/sda3 3252 30394 218026147+ 83 Linux I have launched yum clean all with no success clearing up space. Please advise. Thanks.

  Read the article

• Reinstall ruby (or just yaml lib)

  - by Christian Sciberras

  I've installed ruby 1.9 from source, and tried installing gem 'bundler': < gem install bundler > /usr/local/lib/ruby/1.9.1/yaml.rb:56:in `<top (required)>': > It seems your ruby installation is missing psych (for YAML output). > To eliminate this warning, please install libyaml and reinstall your ruby. > .... I've not been able to cleanly uninstall ruby (wtf?!), and installing libyaml at this point didn't help either. So it seems I've ended up with a fk-ed up server since I can't rollback nor fix the issue. Of course, I do have backups, but this situation is ridiculous nonetheless. Surely there must be a real fix?

  Read the article

• Lync using SQL 2008 R2 SP1 - Publish Topology error

  - by EKS

  Error that shows in the web page opened by the Topology builder: Error: An error occurred: "Microsoft.Rtc.Common.Data.SqlConnectionException" "A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)" Looking in the log file: ( I assume this is the acutal error making it STOP) Installed SQL Server 2005 Backward Compatibility version is 8.05.1054 Error: SQL Server 2005 Backward Compatibility is not installed or its version is not high enough. SQL Server 2005 Backward Compatability SP2 or higher must be installed. I have installed SQLServer2005_BC_x64.msi from MS, and cant seem to find this SP2 version. SQL server is a 2008 R2 SP1. I have also tested with a 2008 SP3 SQL server same error. Named pippes output via ( OSQL /L) SQL-2008-1 SQL2

  Read the article

• FFMPEG Segfault Solutions

  - by Brentley_11

  I'm trying to convert a bunch of movies into h.264 mp4's using FFMPEG. These movies are sourced from various portable camcorders such as the Flip Mino HD and the Kodak ZI8. One issue I'm having with video from the ZI8 is it seems to be causing FFMPEG to segfault. Here is my command: ffmpeg -i 'XmasSailor720p60fps.MOV' -threads 2 -acodec libfaac -ab 96kb -vcodec libx264 -vpre hq -b 500kb -s 484x272 XmasSailor.mp4 Here is the output: FFmpeg version SVN-r20668, Copyright (c) 2000-2009 Fabrice Bellard, et al. built on Dec 2 2009 18:37:34 with gcc 4.2.4 (Ubuntu 4.2.4-1ubuntu4) configuration: --enable-libfaac --enable-libfaad --enable-libmp3lame --enable-libx264 --enable-gpl --enable-nonfree --enable-postproc --enable-pthreads --enable-shared libavutil 50. 5. 1 / 50. 5. 1 libavcodec 52.42. 0 / 52.42. 0 libavformat 52.39. 2 / 52.39. 2 libavdevice 52. 2. 0 / 52. 2. 0 libswscale 0. 7. 2 / 0. 7. 2 libpostproc 51. 2. 0 / 51. 2. 0 Seems stream 0 codec frame rate differs from container frame rate: 59.94 (60000/1001) -> 29.97 (30000/1001) Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'XmasSailor720p60fps.MOV': Duration: 00:00:05.37, start: 0.000000, bitrate: 12021 kb/s Stream #0.0(eng): Video: h264, yuv420p, 1280x720 [PAR 1:1 DAR 16:9], 11994 kb/s, 29.97 tbr, 90k tbn, 59.94 tbc Stream #0.1(eng): Audio: aac, 48000 Hz, stereo, s16, 128 kb/s Metadata major_brand : qt minor_version : 0 compatible_brands: qt comment : KODAK Zi8 Pocket Video Camera comment-eng : KODAK Zi8 Pocket Video Camera [libx264 @ 0x99e1020]using SAR=1/1 [libx264 @ 0x99e1020]using cpu capabilities: MMX2 SSE2Fast SSSE3 FastShuffle SSE4.1 Cache64 [libx264 @ 0x99e1020]profile High, level 2.1 Output #0, mp4, to 'XmasSailor.mp4': Stream #0.0(eng): Video: libx264, yuv420p, 484x272 [PAR 1:1 DAR 121:68], q=10-51, 500 kb/s, 30k tbn, 29.97 tbc Stream #0.1(eng): Audio: aac, 48000 Hz, stereo, s16, 96 kb/s Metadata comment : Encoded with the Statusfirm Video Transcoder Stream mapping: Stream #0.0 -> #0.0 Stream #0.1 -> #0.1 Press [q] to stop encoding [h264 @ 0x99de950]B picture before any references, skipping [h264 @ 0x99de950]decode_slice_header error [h264 @ 0x99de950]no frame! Error while decoding stream #0.0 [h264 @ 0x99de950]B picture before any references, skipping [h264 @ 0x99de950]decode_slice_header error [h264 @ 0x99de950]no frame! Error while decoding stream #0.0 frame= 20 fps= 0 q=13797729.0 size= 0kB time=0.66 bitrate= 0.6kbits/s frame= 39 fps= 37 q=13797729.0 size= 0kB time=1.30 bitrate= 0.3kbits/s frame= 48 fps= 30 q=33.0 size= 11kB time=0.10 bitrate= 903.0kbits/s frame= 58 fps= 27 q=31.0 size= 22kB time=0.43 bitrate= 421.0kbits/s frame= 67 fps= 25 q=29.0 size= 41kB time=0.73 bitrate= 462.6kbits/s frame= 75 fps= 23 q=29.0 size= 59kB time=1.00 bitrate= 486.7kbits/s frame= 83 fps= 22 q=29.0 size= 81kB time=1.27 bitrate= 521.9kbits/s frame= 90 fps= 21 q=29.0 size= 97kB time=1.50 bitrate= 530.1kbits/s frame= 98 fps= 20 q=29.0 size= 114kB time=1.77 bitrate= 526.9kbits/s frame= 106 fps= 20 q=29.0 size= 134kB time=2.04 bitrate= 537.7kbits/s frame= 114 fps= 19 q=29.0 size= 150kB time=2.30 bitrate= 533.7kbits/s frame= 122 fps= 19 q=29.0 size= 172kB time=2.57 bitrate= 547.8kbits/s frame= 130 fps= 19 q=29.0 size= 193kB time=2.84 bitrate= 557.5kbits/s frame= 136 fps= 18 q=29.0 size= 211kB time=3.04 bitrate= 570.0kbits/s frame= 144 fps= 18 q=29.0 size= 242kB time=3.30 bitrate= 599.5kbits/s frame= 152 fps= 17 q=30.0 size= 261kB time=3.57 bitrate= 598.6kbits/s frame= 157 fps= 15 q=-1.0 Lsize= 368kB time=5.21 bitrate= 579.3kbits/s video:302kB audio:61kB global headers:0kB muxing overhead 1.416371% [libx264 @ 0x99e1020]frame I:1 Avg QP:27.22 size: 8720 [libx264 @ 0x99e1020]frame P:48 Avg QP:25.15 size: 3759 [libx264 @ 0x99e1020]frame B:108 Avg QP:30.10 size: 1105 [libx264 @ 0x99e1020]consecutive B-frames: 0.6% 11.5% 28.8% 59.0% [libx264 @ 0x99e1020]mb I I16..4: 28.5% 47.6% 23.9% [libx264 @ 0x99e1020]mb P I16..4: 0.8% 1.3% 0.5% P16..4: 50.6% 17.7% 13.1% 0.0% 0.0% skip:15.9% [libx264 @ 0x99e1020]mb B I16..4: 0.2% 0.3% 0.1% B16..8: 44.0% 1.2% 2.6% direct: 5.1% skip:46.5% L0:45.5% L1:51.0% BI: 3.5% [libx264 @ 0x99e1020]final ratefactor: 23.51 [libx264 @ 0x99e1020]8x8 transform intra:49.9% inter:67.9% [libx264 @ 0x99e1020]direct mvs spatial:98.1% temporal:1.9% [libx264 @ 0x99e1020]coded y,uvDC,uvAC intra: 54.7% 76.1% 41.4% inter: 17.1% 24.4% 7.8% [libx264 @ 0x99e1020]i16 v,h,dc,p: 18% 52% 5% 25% [libx264 @ 0x99e1020]i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 12% 22% 9% 7% 10% 10% 9% 8% 13% [libx264 @ 0x99e1020]i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 13% 18% 8% 8% 10% 13% 10% 9% 12% [libx264 @ 0x99e1020]Weighted P-Frames: Y:10.4% [libx264 @ 0x99e1020]ref P L0: 60.2% 15.3% 11.0% 7.6% 5.2% 0.7% [libx264 @ 0x99e1020]ref B L0: 72.6% 15.6% 11.8% [libx264 @ 0x99e1020]kb/s:471.17 Segmentation fault I'm wondering if anyone else has ran into similar issues. I wasn't able to find anything helpful via Google. Another question I have is if anyone knows of a company that offers paid support for FFMPEG. Thank you for your time.

  Read the article

• change directory automatically on ssh login

  - by Gareth

  Hi, I'm trying to get ssh to automatically change to a particular directory when I log in. I tried to get that behaviour working using the following directives in ~/.ssh/config: Host example.net LocalCommand "cd web" but whenever I log in, I see the following: /bin/bash: cd web: No such file or directory although though there is definitely a web folder in my home directory. Even using an absolute path gives the same message. To be clear, if I type cd web after logging in I get to the right folder. What am I missing here? EDIT: Different combinations of quotes/absolute paths give different error messages: LocalCommand "cd web" /bin/bash: cd web: No such file or directory LocalCommand cd web /bin/bash: line 0: cd: web: No such file or directory LocalCommand cd /home/gareth/web /bin/bash: line 0: cd: /home/gareth/web: Input/output error This makes me think that the quotes shouldn't be there, and that there's another error happening.

  Read the article

• Dlink DWA-643 ExpressCard / Atheros AR5008 can't connect to wifi networks

  - by Justin Kelly

  I've just purchased a D-Link DWA-643 Xtreme N ExpressCard Notebook Adapter - but it can't connect to my wireless network The card is listed on the FSF website and - refer links below: http://www.fsf.org/resources/hw/index_html/net/wireless/index_html/cards.html http://www.dlink.com.au/products/?pid=550 Ubuntu see the card as using the Atheros AR5008 chipset - refer image below The card lights up and I can see that available wifi networks using this card - so it seems to 'just work' on ubuntu 12.04 but when i try and connect to my networks - it fails I've tried setting the network to all the different options (WEP, WPA2, no encryption, etc.. b/g/n ) but ubuntu sill cant connect to it I've also installed wicd but still couldn't connect Has anyone got a DWA-643 to work in Ubuntu? Or does anyone have any suggestion on how to get it to connect?? Any help would be greatly appreciated Note: the laptop has built in wifi but its broadcom, works but with dialup speed connection - and i've had nothign but trouble using the boardcom drivers so purchased the FSF recommended PCI expresscard as i hoped it would 'just work' on the latest Ubuntu i've have tried to disable the built in wifi - broadcom - but even with the broadcom uninstall and unavailable it didnt help the dlink to connect previously I had MAC address filtering on the router - i've added the dlinks MAC - and also disabled MAC address filtering - still no luck lspci output below: 18:00.0 Network controller: Atheros Communications Inc. AR5008 Wireless Network Adapter (rev 01) Subsystem: D-Link System Inc Device 3a6f Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at e4000000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [60] Express Legacy Endpoint, MSI 00 Capabilities: [90] MSI-X: Enable- Count=1 Masked- Capabilities: [100] Advanced Error Reporting Capabilities: [140] Virtual Channel Kernel driver in use: ath9k Kernel modules: ath9k

  Read the article

• send command to an already running screen session

  - by aXon

  Hi I have been trying to send commands to a running gnu screen session (4.00.03) in opensolaris, but cannot get it to run any commands through any combination of screen -X Ok, I start a screen session with screen -S test, and then tried to with screen -r -X "date"to just show me the date, when I would reconnect to it. But neither an error message nor output in the screen happened. I tried with so many combinations, that I can't even remember. Any hints on how to accomplish it? The reason why I am doing this is, because I have a program, which does not come as a daemon, and I wish to start it in a screen session, so I can later on see what is going on.

  Read the article

• Why cant I get 3 monitors working with my ati 5770

  - by G-Dogg

  I have an ati 5770, card with vga, dvi and hdmi output. I can only get 2 out of the 3 monitors working at once, however i can change the configuation so that all monitors can be selected, but only 2 will work at once.. 2 of my monitors have dvi inputs and one has vga. in my catyalist control center it shows all 3 monitors are there but either 2 can be selected at a time, and so the same with my windows 7. I have and adapter which i use on the 3rd monitor, hdmi-dvi adaptor and it works. also when i boot up my pc i get 2 monitors booting up and when windows starts the 3rd monitor boots but the 1st one closes. I looked at my package box and it actualy does specify ati eyefinity technology is available with this card. why wont it work???

  Read the article

• MySQL port 3306 blocked in csf yet can still telnet to port 3306 from external host

  - by Neek

  We have a Centos 6 VPS that was recently migrated to a new machine within the same web hosting company. It's running WHM/cPanel and has csf/lfd installed. csf is set up with mostly vanilla config. I'm no iptables expert, csf has not let me down before. If a port isn't in the TCP_IN list, it should be blocked on the firewall by iptables. My problem is that I can telnet to port 3306 from an external host, yet I think iptables ought to be blocking 3306 because of csf's rules. We are now failing a security check because of this open port. (this output is obfuscated to protect the innocent: www.ourhost.com is the host with the firewall problem) [root@nickfenwick log]# telnet www.ourhost.com 3306 Trying 158.255.45.107... Connected to www.ourhost.com. Escape character is '^]'. HHost 'nickfenwick.com' is not allowed to connect to this MySQL serverConnection closed by foreign host. So the connection is established, and MySQL refuses the connection due to its configuration. I need the network connection to be refused at the firewall level, before it reaches MySQL. Using WHM's csf web UI I can see 'Firewall Configuration' includes a fairly sensible TCP_IN line: TCP_IN: 20,21,22,25,53,80,110,143,222,443,465,587,993,995,2077,2078,2082,2083,2086,2087,2095,2096,8080 (lets ignore that I could trim that a little for now, my concern is that 3306 is not listed in that list) When csf is restarted it logs the usual slew of output as it sets up iptables rules, for example what looks like it blocking all traffic and then allowing specific ports like SSH on 22: [cut] DROP all opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 [cut] ACCEPT tcp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 state NEW tcp dpt:22 [cut] I can see that iptables is running, service iptables status returns a long list of firewall rules. Here is my Chain INPUT section from service iptables status, hopefully that's enough to show how the firewall is configured. Table: filter Chain INPUT (policy DROP) num target prot opt source destination 1 acctboth all -- 0.0.0.0/0 0.0.0.0/0 2 ACCEPT tcp -- 217.112.88.10 0.0.0.0/0 tcp dpt:53 3 ACCEPT udp -- 217.112.88.10 0.0.0.0/0 udp dpt:53 4 ACCEPT tcp -- 217.112.88.10 0.0.0.0/0 tcp spt:53 5 ACCEPT udp -- 217.112.88.10 0.0.0.0/0 udp spt:53 6 ACCEPT tcp -- 8.8.4.4 0.0.0.0/0 tcp dpt:53 7 ACCEPT udp -- 8.8.4.4 0.0.0.0/0 udp dpt:53 8 ACCEPT tcp -- 8.8.4.4 0.0.0.0/0 tcp spt:53 9 ACCEPT udp -- 8.8.4.4 0.0.0.0/0 udp spt:53 10 ACCEPT tcp -- 8.8.8.8 0.0.0.0/0 tcp dpt:53 11 ACCEPT udp -- 8.8.8.8 0.0.0.0/0 udp dpt:53 12 ACCEPT tcp -- 8.8.8.8 0.0.0.0/0 tcp spt:53 13 ACCEPT udp -- 8.8.8.8 0.0.0.0/0 udp spt:53 14 LOCALINPUT all -- 0.0.0.0/0 0.0.0.0/0 15 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 16 INVALID tcp -- 0.0.0.0/0 0.0.0.0/0 17 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 18 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:20 19 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:21 20 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:22 21 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:25 22 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:53 23 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:80 24 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:110 25 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:143 26 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:222 27 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:443 28 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:465 29 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:587 30 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:993 31 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:995 32 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:2077 33 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:2078 34 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:2082 35 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:2083 36 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:2086 37 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:2087 38 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:2095 39 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:2096 40 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:8080 41 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 state NEW udp dpt:20 42 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 state NEW udp dpt:21 43 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 state NEW udp dpt:53 44 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 state NEW udp dpt:222 45 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 state NEW udp dpt:8080 46 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 8 47 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 0 48 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 11 49 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 3 50 LOGDROPIN all -- 0.0.0.0/0 0.0.0.0/0 What's the next thing to check?

  Read the article

• Add static ARP entries when network is brought up

  - by jozzas

  I have some pretty dumb IP devices on a subnet with my Ubuntu server, and the server receives streaming data from each device. I have run into a problem in that when an ARP request is issued to the device while it is streaming data to the server, the request is ignored, the cache entry times out and the server stops receiving the stream. So, to prevent the server from sending ARP requests to these devices altogether, I would like to add a static ARP entry for each, something like arp -i eth2 -s ip.of.the.device mac:of:the:device But these "static" ARP entries are lost if networking is disabled / enabled or if the server is rebooted. Where is the best place to automatically add these entries, preferably somewhere that will re-add them every time the interface eth2 is brought up? I really don't want to have to write a script that monitors the output of arp and re-adds the cache entries if they're missing. Edit to add what my final script was: Created the file /etc/network/if-up.d/add-my-static-arp With the contents: #!/bin/sh arp -i eth0 -s 192.168.0.4 00:50:cc:44:55:55 arp -i eth0 -s 192.168.0.5 00:50:cc:44:55:56 arp -i eth0 -s 192.168.0.6 00:50:cc:44:55:57 And then obviously add the permission to allow it to be executed: chmod +x /etc/network/if-up.d/add-my-static-arp And these arp entries will be manually added or re-added every time any network interface is brought up.

  Read the article

• Setting up Beats audio on HP Pavilion m6

  - by Joel Auterson

  I have an HP Pavilion m6-1054sa laptop, with a Beats subwoofer on the bottom. The normal laptop speakers work fine under Ubuntu but the Beats speaker(s?) does not. Anyone know how to get this working? Here's my lspci output, if it helps... 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Ivy Bridge PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.1 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 2 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Thames XT/GL [Radeon HD 7600M Series] (rev ff) 07:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5289 (rev 01) 07:00.2 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 0a) 08:00.0 Network controller: Intel Corporation Centrino Wireless-N 2230 (rev c4)

  Read the article

• Ubuntu 11.04 does not detect my tata photon +

  - by nikhil

  I am trying to connect to the Internet via my photon+ from the past day and have tried various suggestions on the Internet and have tried to zero in to the main cause of the problem which is that my device is not detected. I have tried the following ways: 1) After connecting the device, I tried to create a mobile broadband connection via System Preferences Network Connections and selected tata photon plus. But there was no connection. 2) I did sudo apt-get install usb-modeswitch-data and sudo apt-get install usb-modeswitch But the prompt said that they are at their newest version. 3) I tried to edit the file sudo gedit /etc/usb_modeswitch.d/12d1:1446, but this file did not exist. 4) my lsusb output is nikhil@nikhil:~$ lsusb Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 003: ID 22f4:0021 Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 04f2:b159 Chicony Electronics Co., Ltd Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Any Ideas ??

  Read the article

• JMX Monitoring of GlassFish Servers

  - by tjquinn

  Did you ever wonder what this message in your GlassFish server.log file means? JMXStartupService has started JMXConnector on JMXService URL service:jmx:rmi://192.168.2.102:8686/jndi/rmi://192.168.2.102:8686/jmxrmi It means you can monitor any GlassFish server process, remotely or locally, using any standard Java Management Extensions (JMX) client.  Examples: jconsole or jvisualvm.   Copy the part of the log message that starts with "service:" into the Add JMX Connection dialog of jvisualvm:  or into the New Connection dialog of jconsole: (The full string is truncated in the on-screen display, but if you copied from the server.log and pasted into the form it should all be there.) The examples above are for a DAS, and your host will probably be different.   The server.log files for other GlassFish servers (instances) will have similar log entries giving the JMX connection string to use for those processes.  Look for the host and/or port to be different. Note a few things about security: Here we've assumed you are using the default admin username and password.  If you are not, just enter a valid admin username and password for your installation.  Once connected, you have normal access to all the JVM statistics and controls. You can use JMX clients that support MBeans to view the GlassFish configuration.  When you connect to the DAS, you can also change that configuration, but you can only view configuration when you connect to an instance. To use a JMX client on one system to connect to a GlassFish server running on another system, you need to enable secure admin if you have not already done so: asadmin change-admin-password (respond to the prompts) asadmin enable-secure-admin asadmin restart-domain (as prompted in the output from enable-secure-admin)

  Read the article

• compiling php5.4 on macosx 10.6.8

  - by ling

  I'm trying to compile php 5.4.7 on mac osx 10.6.8. I could install it using the default procedure: ./configure \ --prefix=/usr/local \ --with-config-file-path=/usr/local/etc \ --with-apxs2=/usr/local/apache2/bin/apxs \ --with-mysql sudo make clean sudo make sudo make install But now if I try to install to compile php with the curl module it fails: ./configure \ --prefix=/usr/local \ --with-config-file-path=/usr/local/etc \ --with-curl=/usr \ --with-apxs2=/usr/local/apache2/bin/apxs \ --with-mysql sudo make clean sudo make = last lines of make output: Undefined symbols: "_CRYPTO_set_locking_callback", referenced from: _zm_shutdown_curl in interface.o _zm_startup_curl in interface.o "_CRYPTO_num_locks", referenced from: _zm_shutdown_curl in interface.o _zm_startup_curl in interface.o "_CRYPTO_get_id_callback", referenced from: _zm_startup_curl in interface.o "_CRYPTO_set_id_callback", referenced from: _zm_shutdown_curl in interface.o _zm_startup_curl in interface.o ld: symbol(s) not found collect2: ld returned 1 exit status make: * [libs/libphp5.bundle] Error 1 I read somewhere ( http://user.xmission.com/~georgeps/documentation/tutorials/compilation_and_makefiles.html ) that in this case, I should tell the compiler where to find the missing library, so that it can links the missing files. The problem is that I don't what library I should look for, is it libssl2 ?

  Read the article

• How to generate a 8 bit per sample wav audio file in VLC

  - by Ahmed safan

  I'm using the following vlc command line to extract first 5 minutes of audio from video file "-I dummy -vvv --no-sout-video --sout-audio --no-sout-rtp-sap --no-sout-standard-sap --ttl=1 --sout-transcode-threads=5 --sout-transcode-high-priority --sout-keep --sout #transcode{acodec=s16l,channels=1,samplerate=8000,ab=64}:std{mux=wav,access=file,dst="c:\dest.wav"} "c:\originalvideo.mpg" --start-time=0 --stop-time=300 vlc://quit"; if ab=64 =64 k bits per second and samples per second=8 k samples then bits per sample=64/8=8 bits per sample but the problem is that the output file always has samples of 16 bits per sample. I know that sample can contain bits from 8 , 16, 24 to 32 bits per sample. i want to get 8 bits per sample file how can this be done ?

  Read the article

• Inverted question mark only on Microsoft Office applications

  - by inerte

  My dad has a notebook and the key which has the "/?°" symbols acts like ctrl. Known factory problem. Anyway, his keyboard also has a "?" marked under the "w" key. Pressing ctrl + alt + w will display the "?" character (question, interrogation mark). Except on Office applications, like Word and Outlook, which will output "¿". I've searched Word and Outlook menus looking for a parameter that could be, somehow, remapping the notebooks keyboards, applying different regional configurations, language, or encodings. Since it only happens on Office apps, I believe the solution is within its options, but I was unable to find it where. Pressing ctrl + alt gr + w will display ? correctly, but I am stumped by this problem. I could remap the keys and make "/?° behave correctly, but my curiosity now is eating me alive. Why only on Office?

  Read the article

• Python: Check existence of shell command before execution

  - by Gabriel L. Oliveira

  Hi all. I'm trying to find a way to check the existence of a shell command before its execution. For example, I'll execute the command ack-grep. So, I'm trying to do: import subprocess from subprocess import PIPE cmd_grep = subprocess.Popen(["ack-grep", "--no-color", "--max-count=1", "--no-group", "def run_main", "../cgedit/"], stdout=PIPE, stderr=PIPE) Than, if I execute cmd_grep.stderr.read() I receive '' like the output. But I don't have the command ack-grep on my path. So, why Popen is not putting the error message on my .stderr variable? Also, is there a easyer way to do what I'm trying to do?

  Read the article

• How to make a btrfs snapshot?

  - by MountainX

  My /home partition consists of an entire physical disk. It is formatted as btrfs. I want to snapshot it. I'm confused regarding subvolume naming, in particular. I am aware that there are similar questions, but each similar question seems to be asking something different from what I'm asking (and they are older, which means probably outdated, given the rapid development of btrfs). For example, the answer to this question is apparently not the answer to my question because my /home partition is a separate volume and the man page for btrfs shows a different command for creating snapshots now. another similar problem, no solid solution. someone else as confused as me on the naming issues My question: Starting simple: is this the correct command to take a simple snapshot of my home partition? btrfs subvolume snapshot /home/@home /home/@home_snapshot_20120421 I got really brave and tested it and it does not work. The error is error accessing /home/@home. As shown below, @home is listed. I'm obviously confused on subvolume names. Do I need to use them in creating snapshots? Some examples show taking snapshots of home using /home as the source parameter, but based on examples of root volumes, it seems to me that I need to use /home/@home. Would this command work? And if not, why? btrfs subvolume snapshot /home /home/@home_snapshot_20120421 Is the @ just a naming convention? Is it meaningful at all? Here's some output that may be relevant: btrfs subvolume list /home ID 256 top level 5 path @home I'm not sure what that means, exactly. When I try btrfs device scan it gives an error (e.g. unable to scan the device /dev/sda1). My file system doesn't have any errors. Everything is fine.

  Read the article

• Why kernel source is not installed

  - by Subhajit

  I want to install kernel source in Ubuntu 12.04 which is not installed. I have checked the same using the following command : dpkg -s kernel Output is Kernel is not installed no information available Hence I have followed the following steps to install the same: 1.Installed the Dependencies by the following command: sudo apt-get install gcc libncurses5-dev git-core kernel-package fakeroot build-essential sudo apt-get update && sudo apt-get upgrade Download kernel source by the following command: wget http://www.kernel.org/pub/linux/kernel/v3.x/linux-3.5.tar.bz2 tar -xvf linux-3.5.tar.bz2 cd linux-3.5/ 3.Compiled the source code to generate the .deb packages by the following command make-kpkg clean fakeroot make-kpkg --initrd --append-to-version=-spica kernel_image kernel_headers Install the .deb packages (two .deb packages generated, one is to install the kernel headers, another one is to install the kernel image) by the following command sudo dpkg -i linux-*.deb But after reboot it seems kernel is not installed (checked by dpkg -s kernel). Please tell where I am going wrong. Also, In step 3, I guess I am installing a new kernel (named spica kernel_image) but during the boot up this new kernel is not showing as option. Please help me

  Read the article

< Previous Page | 377 378 379 380 381 382 383 384 385 386 387 388  | Next Page >