Search Results

Search found 11259 results on 451 pages for 'tool uml'.

Page 382/451 | < Previous Page | 378 379 380 381 382 383 384 385 386 387 388 389  | Next Page >

  • IIS Web Farm Framework servers are automatically set to "unavailable" even when they are healthy... And they never return to the available state!

    - by JohannesH
    I have 2 web farm configurations, one with 2 member servers and one with 3 member servers. I have health monitoring set up on both farms and the monitoring tool reports all servers as being healthy. However after a while all the servers are marked as being "Unavailable" and "Healthy" in the "Monitoring and Management" screen (in the "Servers" screen they are all listed with "Yes" in the "Ready for Load Balancing" column). Viewing the event log on both the web farm controller or any of farm servers doesn't reveal anything interesting. there are no warnings or errors in the period where the servers became unavailable. There are a couple of informational events about the worker process getting shut down due to inactivity but I don't hope this is the cause since that would mean that the farms will die during the night when the load is low. Am I missing something? EDIT: Btw, I think its very odd that the application pool shuts down on the servers since the health monitoring system is polling an aspx page on each server. Shouldn't that keep them going? EDIT2: Now I've also experienced this problem with the RTW version of Web Farm Framework 2.

    Read the article

  • Protocol (or service publish/discovery) to detect devices in network

    - by Gobliins
    we connect some embedded devices in a network. What i am looking for now, is a way to find the devices IP and identify them. We work with Windows PC´s and i am about to write a C# tool that should do this. I thought about send a udp broadcast and in the ack i.e. is the device´s ip, which would mean the device needs a daemon runnig to assign an ip itself. Running a service (like a printer) on the device, and on the PC just lookup for the service. I read about some things like apipa, zeroconf, ipv4 local link, bonjour, dns-sd, mdns, bonjour; They can automatically assign ip´s and publish services in a network. My Question is, can someone recommend me what would be good for my task? -The protocol or Service should be low on ressource (memory/cpu usage) use. -Are there some standard protocolls to use? -Is DNS a good idea or would it be to ressource consumpting just for finding a device´s IP? -Should also work when no dhcp servers are around. edit: To clarify a bit: The IP configuration is automatic. The problem to focus is how to tell the PC which IP in the network (or a direct connection in this vase there would only be one) belongs to the device (identity).

    Read the article

  • Is there an simple but good To Do Manager app for the Mac?

    - by Another Registered User
    Every morning I think about what I am going to do today. So I take a paper and start to write things like: [ ] Call Mr. XYZ [ ] Answer Support E-Mails [ ] Reduce website header height by 20 px [ ] Create new navigation bar icons And every time I'm done with something, I paint a checkmark in this square. On paper. It would be fun to have something like this as an application. But I don't want a heavy project management tool or integration with email. It should be like download, install, use without fat configuration and steep learning curve. usually I don't schedule my to do's, I just write down every day what I want to accomplish today. For my experience it doesn't make sense to plan what to do next week, because next week everything looks totally different. Would be cool if such a simple utility exists. At the moment I try just using textEdit and deleting rows which are done. With a nice interface, this would be much more fun.

    Read the article

  • Troubleshoot port forwarding. Could it be ISP blocking incoming connections?

    - by Gravy
    Had a new Axis IP camera delivered yesterday. Plugged into Cisco E2400 Wireless Router but having problems. Example topology: WAN IP: 10.10.10.10 (example) Cisco Router: 192.168.1.1 Axis Camera: 192.168.1.10:80 Port forwarding rules set up on router External Port: 999 Internal Port: 80 Protocol: TCP & UDP Device IP: 192.168.1.10:80 Enabled: True Trying to connect from within the lan to 192.168.1.1:80 from within browser - Works properly. Trying to connect from within the lan to 10:10:10:10:999 from within browser - Works properly. Trying to connect from outside the LAN (e.g. via 3g or another isp) to 10:10:10:10:999 from within browser - Doesnt work. I get the following errors from different machines / browsers: Safari could not open the page because the server stopped responding (IOS) The server at xx.xx.xx.xx is taking too long to respond. (firefox) This problem is not just for the Axis camera. I am also having similar problems connecting to my NAS drive. After using a web based port scanning tool, it appears as though port 999 is closed. Not certain why when I have set up port forwarding within the router. Any troubleshooting suggestions to help me determine whether the problem is with my Cisco settings / firewall or whether it could be my ISP blocking incoming connection requests? Many thanks

    Read the article

  • Fixing bent pins on a CPU

    - by Pekka
    While replacing a mainboard in a desktop machine (see related question), I did something stupid. I inserted the CPU into the new mainboard, but didn't check for the right position. When it didn't immediately lock in, I pressed slightly before realizing what was wrong. The result was a number of bent pins. I tried every tutorial that popped up when Googling "CPU bent pins" - using credit cards, sewing needles, and a hunting knife to get the pins back into position - but to no avail: For every pin I get straightened out, two others are bent. I have no problem getting individual pins straightened out, but my many attempts have led to many pins being slightly askew - enough for the CPU not to fit into the socket (An AMD X3 one). Maybe I just lack the motoric finesse. What I would need is some sort of a grid to fix all pins at once. It's a €50 processor so the loss is not catastrophic. But I thought before I go buy a new one, I thought I'd check here whether anybody knows some magic trick, or a cheap generally-available tool to fix this.

    Read the article

  • I really need help resolving a Window Vista BSOD (Blue Screen Crash) on my desktop

    - by anonymous
    Hi, thanks for taking the time to read this. I'll get straight to the details. My desktop is on the fritz; it keeps going to blue screen with the stop message of 0x0000007E immediately after the loading bar of vista, right before transitioning to the account selection screen. My desktop runs on a dual-core 32-bit processor with windows Vista Home(?) installed. I have 3 GB of ram as two separate modules, a 1GB acer module and a 2GB geil module. I have an ati video card, unfortunately I cannot recall the exact name but the chipset is ATI and the manufacturer is Sapphire and the card is on the lower end. My hard drive is 320GB (i think) partitioned into two. The C:\ partition is red lined, while the D:\ partition is still pretty empty. As per the advice of my friend, i tried restarting the system with the graphics card removed. Upon failure, i repeated the process removing one RAM module one at a time, but the system still failed to load. Vista would attempt to repair the system and it would initially report that the system was fixed, but vista really failed to fix the problem. After removing the memory modules, vista started to report it's inability to fix the problem. I tried running on safe mode and the driver listing would always stop at crcdisk.sys. I ran memory diagnostics using the windows memory diagnostic tool found in the screen after vista's failed attempt to fix the problem with no luck. the problem details are as such: Problem Event Name : StartupRepairV2 Problem Signature 01: AutoFailover 02: (vista's version number?) 03: 6 04: 720907 05: 0x7e 06: 0x7e 07: 0 08: 2 09: WrpRepair 10: 0 OS Version: 6.0.6000.2.0.0.256.1 Locale ID 1033 any correct advice would be appreciated as i really need my pc to work so i can work on my projects. kinda sad, but i'm college of computer science and i have no idea what to do :P

    Read the article

  • Shrink Windows OS partition with unmovable files

    - by Tim
    I am trying to shink Windows 7 OS partition C: but cannot shrink as much as I plan due to unmovable files. I have tried Windows own defrag tool before but it does not move files that are unmovable. Here are some ideas I have learned from previous posts, and I hope at least one of them will work and wish to know the detail how to do: Inspired by this post, which suggests backup C:, then delete C: , create a smaller partition, and then copy the backup to the smaller partition. I was wondering if anyone here can confirm that Windows 7 will still work in this way? What reliable tools can be used for backuping the system, and deleting and creating partition, and then copying back the backup in this method? I am actually trying another way suggested in this post. I have identified what unmovable file currently stop further shrinking: \ProgramData\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\00010015.wid::$DATA If I understand correctly, the file belongs to Windows Search. Can I set up somewhere in Windows system settings to temperately eliminate the file and similar ones (because there are many similar files under the same directory which I guess will also stand in the way of shrinking and unmovable by defrag)? Any other idea that might work will also be appreciated. Thanks and regards!

    Read the article

  • With Ubuntu 12.04 unlike 11.04 Wine installed application start menu links are missing

    - by Ron Whites
    With Ubuntu 12.04 and wine 1.4 unlike ubuntu 11.04 with wine 1.2.2 installed application start menu links are missing. For instance with Ubuntu 11.04 including Wine I can install one of our Windows applications and then can go to Applications Wine Programs Semantic Designs TestCoverage Documentation to bring up the documentation for how to run our tool. Unfortunately with Ubuntu 12.04 the Applications menu is gone and going to Dash I do see "Recent Apps and more apps" but my installed Wine application and related documentation link is shown present, even though the wine uninstaller shows in present. I found this online suggestion and tried using the gnome "main menu"... Windows key to launch the Dash. Enter "Main Menu" in the search field and open the old Edit Main Menu app. Select the Category (aka Unity Dash Filter) you want the item in. Name the Dash/Launcher Item Add the Command to launch said app With "mainmenu" then get down to the TestCoverage Documentation and I could see a command link in properties of .. env WINEPREFIX="/home/sdtest/.wine" wine C:\windows\command\start.exe /Unix /home/sdtest/.wine/dosdevices/c:/users/sdtest/Start\ Menu/Programs/Semantic\ Designs/Test\ Coverage/Java\ 1.7\ Documentation.lnk BUT I could not execute this link to view the installed documentation. So I copied the link properties into a file, set it as executable, and ran it as a bash script and the documentation came up! So why can't I use this link under main menu?

    Read the article

  • How can I extend / create a new partition from the following setup?

    - by Kiada
    I'm a little unsure what to do in this situation. When I try to create a new simple volume from the unallocated space I get an error because I already have 4 partitions. I have no option to extend either my C:\ primary partition or the E:\ logical drive. C:\ - Gaming Win7 install. D:\ - Storage Unallocated Space - Would somehow like to install OSX on a partition from this space. E:\ - Software Development Win7 install. I:\ - Ignore this. It's an external 1TB HDD. Do I have any options that do not involve formatting / losing information on either C:\ or E:\? Thank you. Link to visual disk partitioning setup image. Edit: A bit more information regarding partitions. Firstly, the image linked above is a screenshot of Windows 7 partitioning tool, easier to read than text I guess! H:\ System Reserved: 100MB NTFS C:\ 244 GB NTFS Healthy (Page File, Primary Partition) D:\ 294 GB NTFS Healthy (Primary Partition) E:\ 100 GB NTFS Healthy (Boot, Page File, Crash Dump, Logical Drive) Unallocated 292 GB Hope this helps :)

    Read the article

  • Trouble Starting MySL Community Server on Windows 7

    - by CodeAngel
    I have installed Netbeans 7 on my Windows 7. In addition, the MySQL Community Server 5.6.12 is installed with the MSI installer on thesame 7 PC. The MySQL server is integrated with the Netbeans IDE. However , it is not possible to start or stop the MySQL server from the command prompt or the Netbeans IDE. I am only able to start or stop the server from the Windows 7 services tool. Also , it is difficult running SQL queries from the Netbeans IDE even though it shows there is connection with the MySQL server. I have added the my.ini file to the installed directory of the MySQL server , that is : C:\Program Files\MySQL\MySQL Server 5.6 below is the my.ini file : # For advice on how to change settings please see # http://dev.mysql.com/doc/refman/5.6/en/server-configuration-defaults.html # *** DO NOT EDIT THIS FILE. It's a template which will be copied to the # *** default location during install, and will be replaced if you # *** upgrade to a newer version of MySQL. [mysqld] # Remove leading # and set to the amount of RAM for the most important data # cache in MySQL. Start at 70% of total RAM for dedicated server, else 10%. # innodb_buffer_pool_size = 128M # Remove leading # to turn on a very important data integrity option: logging # changes to the binary log between backups. # log_bin # These are commonly set, remove the # and set as required. # basedir = ..... # datadir = ..... port = 3306 # server_id = ..... # Remove leading # to set options mainly useful for reporting servers. # The server defaults are faster for transactions and fast SELECTs. # Adjust sizes as needed, experiment to find the optimal values. # join_buffer_size = 128M # sort_buffer_size = 2M # read_rnd_buffer_size = 2M sql_mode=NO_ENGINE_SUBSTITUTION,STRICT_TRANS_TABLES Any suggestion is welcomed.

    Read the article

  • What could possibly cause my computer to power down at random times?

    - by geoffreydv
    I have recently bought a new Power Supply and a new graphics card. My PC ran smoothly for a few months now but since a couple of days I'm having a strange problem. I am trying to isolate the problem to a specific piece of hardware (because if it's either the Power Supply or the Graphics card they are still under warranty). The problem started when I was playing a game (diablo 3). My PC suddenly powered down. I was unable to turn it on again by pressing the power button. I unplugged the power cable for a few seconds and plugged it back in. This time the pc powered on but the indication light turned orange instead of white as it normally does. The fans were not spinning and I did not see anything on my screen. After trying a couple of times I gave up. Two days later I tried again and this time the PC did boot up as usual. Everything looked okay until I tested if the problem was resolved by starting Diablo again. After about two minutes it powered down again as it did the first time. If I don't run any games my PC does power down after about 3-5 hours. Another fact that might be relevant: One time the PC did not shut down immediatly, instead first my graphics "powered down" but the music I was playing kept on playing. After about 20 seconds the pc powered down completely as usual. What I also noticed is that when I boot instantly after a power down, the chance of another power down occuring is much higher. Does anyone have an idea what could be causing this kind of behaviour or has a certain tool to diagnose the specific hardware parts? Thanks Specs: Memory: 6GB Processor: Intel i5 OS: Windows 7 64 bit The PC is a Dell Studio XPS 8100 with a replaced PSU and Graphics card: PSU: Corsair CX500 (500 watt) Graphics card: AMD Radeon 6850

    Read the article

  • Diagnosing PC crashes (most often while using shared folders or torrents)

    - by Dyppl
    For the last few weeks my PC (pretty old P4 with WinXP SP3) has been crashing randomly. It just suddenly reboots instanteneously. It feels hardware-related but I wasn't able to determine wether it's software or hardware that causes it. I did notice a pattern though: it's more likely to crash when I copy a lot of files over network or have uTorrent running, but sometimes it crashes when I am not doing anything with it. Copying files from it over network causes it to crash in 1 to 10 minutes almost every time. Using torrents causes it to crash every 1-3 hours. With neither or that on it crashes every 24 hours or so. I ruled out the following probable causes: PSU (I bought a new one and turned off most of the drives so the power is sufficient 100%) Bad HDD or interface cable on my SATA disk from which I was originally copying the data over network (bought new SATA cable and later yanked out the HDD completely, PC still crashes without it) Video adapter (AGP slot is now empty, using the onboard VGA at the moment) Network adapter (removed it from PCI, using onboard LAN) CPU (I think: I changed the termopaste and it's temperature is below 50C) RAM (I think: I ran Memtest86 and it didn't show any errors) At the moment I only have only one system HDD and DVD drives, a mouse and a keyboard plugged in. The fact that it crashes most often when I use network extensively makes me think that maybe it's software related (I removed the network adapter from PCI and now am using an onboard one, so network hardware is unlikely to cause problems). I am now pondering system reinstall but it's not a pleasant solution so I decided to ask wether there are better ideas first. If someone can share a good diagnostic tool it would be great because I didn't find anything good. Thanks in advance, I hope that "help to diagnose" questions aren't entirely banned here. EDIT: Motherboard is actually ~4 years old as I replaced it back in 2007

    Read the article

  • Is there a way to measure wifi traffic on a network from a client?

    - by millimoose
    Is there some way (preferrably one that comes with an existing tool) to measure the traffic going through the whole WiFi network from a computer connected to it? (That is, not from the AP or something between the modem and AP.) My situation is this: a few months back, the internet connection at my parent's place got really sluggish and laggy. (Lag spikes that cause page loads to time out etc, connections plain getting lost and dropping packets forever.) It's impossible to get mom's husband to do anything about this because he brushes this off with something like "just tell your sister to turn off torrents". Unfortunately the WiFi router's firmware doesn't do traffic logging. I'm not going to risk bricking it to put WRT on it; nor am I keen on rewiring the network to add a proxy to analyse the traffic. (I'm one of those people that make computers break just by looking at them, except machines I own.) I'd like to be able to find out roughly how much data is going over the air here while all the LAN wires are out of the router, all the computers accused of torrenting are off, etc. The idea is to either show that: Even if everything but my macbook is turned off, something is congesting the network. The husband is a systems developer and has a whole lot of mysterious hardware that's not to be touched around, one of them might be culprit. There is barely any traffic on the network, but the internet is still sluggish. Meaning this is likely a problem the ISP should solve. (Some hardware of theirs being glitchy, someone on an aggregated line hogging it constantly...) The network is encrypted, but I can temporarily set it to open for the sake of finding this out. So, in conclusion? Can this be done? Or is there some alternative way I could try to diagnose the problem?

    Read the article

  • Open source app to manage and run commands on cloud servers? [closed]

    - by Mark Theunissen
    I'm creating a SaaS platform, and I need a component / library that can create, delete and store the connection details for cloud servers. It also needs to support executing shell commands on these servers and returning the response to the caller. I want a central database of servers and their configuration, plus the ability to reach out and manage the servers via SSH execution of bash scripts. I don't want something that needs agents on every server like Chef. For example, this command is received by the hypothetical application: CREATE USER server = server12345 name = myuser It's translated into the following set of actions and executed by the app, which knows how to connect to server12345, and how to create a user on that server: $ ssh root@server12345 $ adduser myuser And returns the output from the shell: Added user myuser. I've done research on Google and can't quite quite find something that does this already. I've found: fabric This part handles the executing of the shell commands very elegantly, and can take multiple server definitions, but it's supposed to be a deployment tool so doesn't do everything that would be required above - for example, it doesn't have a daemon mode where it listens for commands - it expects to be executed on the shell. It also can't provide the central database functionality. libcloud This library can handle the server admin (CRUD) part, but doesn't have a command interface daemon either, and doesn't let you execute commands on the servers. I guess I need something that is a combination of libcloud, fabric and django for an API. Or something else that does that same thing regardless of language. Overmind Overmind is a GUI and wrapper around libcloud, but doesn't support the command execution part. What am I missing here?

    Read the article

  • Looking for VCS wrapper that tracks system files changing across the whole *nix OS and sends diffs through email

    - by nextus
    I need some software that looks after custom directories across the whole OS (i.e. /etc) and alerting me if someone edit something file inside. Additionally, this tool must automatically commit and push changes into backup server, so I can easily determine when specific change in specific file was made. I'm using cvsbackup right now but I want to create or found something more modern. I think using git as VCS is a great idea. I could have local repository and easily revert changes in my configuration files. Furthermore, pushing changes to the remote repository would helps me to recover my configuration files when the server is fault. It doesn't seems difficult to write some wrapper around the git but there are a lot of problems. For example, I need to track custom directories: /usr/local/nginx/ and /etc/. So the destination point for my git repository is /. I don't need to track the other directories so I must to write overwhelming .gitignore rule: * !.gitignore !/etc/ !etc/* !/usr /usr/* !/usr/local /usr/local/* !/usr/local/nginx !/usr/local/nginx/* It's very daunting and prone to error. So it's maybe a good idea to create intermediate file that wrapper reads and converts to .gitignore format. Additionally, I don't want to keep my .git folder in / partition so I need to set appropriate GIT_DIR and GIT_WORK_TREE variables for git. Is there any ready to use tools for implementation this task? I don't found any but I don't believe that no one needs this feature.

    Read the article

  • How to remove all data that a website stores on a PC? [on hold]

    - by s.r.a
    I was a member in a computer forum website (sevenforums.com) for months. Two days ago I created a thread and many members participated in it, some of them asked me some irrelevant questions and I said “this question is irrelevant” and didn’t get them the answer. Thread finished and I could get the answer from another website and posted it to that website to arise members’ knowledge. Yesterday like every day I went to that website and faced a massage which was banning me, and my account was disabled. I shocked and I didn’t have even any option to appeal against that wrong decision. So I had to do something. And I did the following works: 1- I disconnected my Internet connection and cleared all the history data on the browser I use, the Google chrome. 2- I then ran “ccleaner” tool and marked almost all the options and then clicked on “run” button. Then it cleared all the data including the cookies. 3- I connected the machine (desktop) to the Internet and immediately changed my IP address. 4- I created a new Hotmail account and tried to register as a new member to that website (sevenforums.com). 5- I succeeded and my new account was enabled so I start to posting to that website. But unfortunately, after less than 1 minute I faced this message: “You are already banned”! My question is that, how they could know me again? How to create a new account without they know me? Thanks in advance.

    Read the article

  • Windows 7 constantly accessing hard drive [duplicate]

    - by Zohar
    Possible Duplicate: Tool which finds which process is causing the heavy hard drive activity? Did you notice that on Windows 7 (I use 64-bit) the hard drive LED is constantly blinking, which means that the OS is constantly wearing the hard drive by accessing it? It's something related to the system process, and it even occurs in safe mode, so I don't think it's a third party software problem. Has anyone experienced this problem as well, and is it a Windows problem, or caused by something else? Edit: My indexing service is reduced to indexing only the Start Menu. Even if it was set for the whole computer, it would eventually stop; that's not it. My friends also suffer from the same problem. Please answer my first question: have any of you have seen a Windows 7 machine whose hard drive LED is at rest? I'm also trying to track down the offending process using procmon and Resource Monitor, and it actually seems like a system process. It could also be svchost.exe, and I'm not sure which file they are accessing since I see a lot of activity which I can't make sense of. It's loading system DLLs, accessing registry keys, and other nonsense.

    Read the article

  • OpenLDAP and SSL

    - by Stormshadow
    I am having trouble trying to connect to a secure OpenLDAP server which I have set up. On running my LDAP client code java -Djavax.net.debug=ssl LDAPConnector I get the following exception trace (java version 1.6.0_17) trigger seeding of SecureRandom done seeding SecureRandom %% No cached client session *** ClientHello, TLSv1 RandomCookie: GMT: 1256110124 bytes = { 224, 19, 193, 148, 45, 205, 108, 37, 101, 247, 112, 24, 157, 39, 111, 177, 43, 53, 206, 224, 68, 165, 55, 185, 54, 203, 43, 91 } Session ID: {} Cipher Suites: [SSL_RSA_WITH_RC4_128_MD5, SSL_RSA_WITH_RC4_128_SHA, TLS_RSA_WITH_AES_128_CBC_SHA, TLS_DHE_RSA_WITH_AES_128_CBC_SHA, TLS_DHE_DSS_WITH_AES_128_CBC_SHA, SSL_RSA_W ITH_3DES_EDE_CBC_SHA, SSL_DHE_RSA_WITH_3DES_EDE_CBC_SHA, SSL_DHE_DSS_WITH_3DES_EDE_CBC_SHA, SSL_RSA_WITH_DES_CBC_SHA, SSL_DHE_RSA_WITH_DES_CBC_SHA, SSL_DHE_DSS_WITH_DES_CBC_SH A, SSL_RSA_EXPORT_WITH_RC4_40_MD5, SSL_RSA_EXPORT_WITH_DES40_CBC_SHA, SSL_DHE_RSA_EXPORT_WITH_DES40_CBC_SHA, SSL_DHE_DSS_EXPORT_WITH_DES40_CBC_SHA] Compression Methods: { 0 } *** Thread-0, WRITE: TLSv1 Handshake, length = 73 Thread-0, WRITE: SSLv2 client hello message, length = 98 Thread-0, received EOFException: error Thread-0, handling exception: javax.net.ssl.SSLHandshakeException: Remote host closed connection during handshake Thread-0, SEND TLSv1 ALERT: fatal, description = handshake_failure Thread-0, WRITE: TLSv1 Alert, length = 2 Thread-0, called closeSocket() main, handling exception: javax.net.ssl.SSLHandshakeException: Remote host closed connection during handshake javax.naming.CommunicationException: simple bind failed: ldap.natraj.com:636 [Root exception is javax.net.ssl.SSLHandshakeException: Remote host closed connection during hands hake] at com.sun.jndi.ldap.LdapClient.authenticate(Unknown Source) at com.sun.jndi.ldap.LdapCtx.connect(Unknown Source) at com.sun.jndi.ldap.LdapCtx.<init>(Unknown Source) at com.sun.jndi.ldap.LdapCtxFactory.getUsingURL(Unknown Source) at com.sun.jndi.ldap.LdapCtxFactory.getUsingURLs(Unknown Source) at com.sun.jndi.ldap.LdapCtxFactory.getLdapCtxInstance(Unknown Source) at com.sun.jndi.ldap.LdapCtxFactory.getInitialContext(Unknown Source) at javax.naming.spi.NamingManager.getInitialContext(Unknown Source) at javax.naming.InitialContext.getDefaultInitCtx(Unknown Source) at javax.naming.InitialContext.init(Unknown Source) at javax.naming.InitialContext.<init>(Unknown Source) at javax.naming.directory.InitialDirContext.<init>(Unknown Source) at LDAPConnector.CallSecureLDAPServer(LDAPConnector.java:43) at LDAPConnector.main(LDAPConnector.java:237) Caused by: javax.net.ssl.SSLHandshakeException: Remote host closed connection during handshake at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(Unknown Source) at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(Unknown Source) at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readDataRecord(Unknown Source) at com.sun.net.ssl.internal.ssl.AppInputStream.read(Unknown Source) at java.io.BufferedInputStream.fill(Unknown Source) at java.io.BufferedInputStream.read1(Unknown Source) at java.io.BufferedInputStream.read(Unknown Source) at com.sun.jndi.ldap.Connection.run(Unknown Source) at java.lang.Thread.run(Unknown Source) Caused by: java.io.EOFException: SSL peer shut down incorrectly at com.sun.net.ssl.internal.ssl.InputRecord.read(Unknown Source) ... 9 more I am able to connect to the same secure LDAP server however if I use another version of java (1.6.0_14) I have created and installed the server certificates in the cacerts of both the JRE's as mentioned in this guide -- OpenLDAP with SSL When I run ldapsearch -x on the server I get # extended LDIF # # LDAPv3 # base <dc=localdomain> (default) with scope subtree # filter: (objectclass=*) # requesting: ALL # # localdomain dn: dc=localdomain objectClass: top objectClass: dcObject objectClass: organization o: localdomain dc: localdomain # admin, localdomain dn: cn=admin,dc=localdomain objectClass: simpleSecurityObject objectClass: organizationalRole cn: admin description: LDAP administrator # search result search: 2 result: 0 Success # numResponses: 3 # numEntries: 2 On running openssl s_client -connect ldap.natraj.com:636 -showcerts , I obtain the self signed certificate. My slapd.conf file is as follows ####################################################################### # Global Directives: # Features to permit #allow bind_v2 # Schema and objectClass definitions include /etc/ldap/schema/core.schema include /etc/ldap/schema/cosine.schema include /etc/ldap/schema/nis.schema include /etc/ldap/schema/inetorgperson.schema # Where the pid file is put. The init.d script # will not stop the server if you change this. pidfile /var/run/slapd/slapd.pid # List of arguments that were passed to the server argsfile /var/run/slapd/slapd.args # Read slapd.conf(5) for possible values loglevel none # Where the dynamically loaded modules are stored modulepath /usr/lib/ldap moduleload back_hdb # The maximum number of entries that is returned for a search operation sizelimit 500 # The tool-threads parameter sets the actual amount of cpu's that is used # for indexing. tool-threads 1 ####################################################################### # Specific Backend Directives for hdb: # Backend specific directives apply to this backend until another # 'backend' directive occurs backend hdb ####################################################################### # Specific Backend Directives for 'other': # Backend specific directives apply to this backend until another # 'backend' directive occurs #backend <other> ####################################################################### # Specific Directives for database #1, of type hdb: # Database specific directives apply to this databasse until another # 'database' directive occurs database hdb # The base of your directory in database #1 suffix "dc=localdomain" # rootdn directive for specifying a superuser on the database. This is needed # for syncrepl. rootdn "cn=admin,dc=localdomain" # Where the database file are physically stored for database #1 directory "/var/lib/ldap" # The dbconfig settings are used to generate a DB_CONFIG file the first # time slapd starts. They do NOT override existing an existing DB_CONFIG # file. You should therefore change these settings in DB_CONFIG directly # or remove DB_CONFIG and restart slapd for changes to take effect. # For the Debian package we use 2MB as default but be sure to update this # value if you have plenty of RAM dbconfig set_cachesize 0 2097152 0 # Sven Hartge reported that he had to set this value incredibly high # to get slapd running at all. See http://bugs.debian.org/303057 for more # information. # Number of objects that can be locked at the same time. dbconfig set_lk_max_objects 1500 # Number of locks (both requested and granted) dbconfig set_lk_max_locks 1500 # Number of lockers dbconfig set_lk_max_lockers 1500 # Indexing options for database #1 index objectClass eq # Save the time that the entry gets modified, for database #1 lastmod on # Checkpoint the BerkeleyDB database periodically in case of system # failure and to speed slapd shutdown. checkpoint 512 30 # Where to store the replica logs for database #1 # replogfile /var/lib/ldap/replog # The userPassword by default can be changed # by the entry owning it if they are authenticated. # Others should not be able to see it, except the # admin entry below # These access lines apply to database #1 only access to attrs=userPassword,shadowLastChange by dn="cn=admin,dc=localdomain" write by anonymous auth by self write by * none # Ensure read access to the base for things like # supportedSASLMechanisms. Without this you may # have problems with SASL not knowing what # mechanisms are available and the like. # Note that this is covered by the 'access to *' # ACL below too but if you change that as people # are wont to do you'll still need this if you # want SASL (and possible other things) to work # happily. access to dn.base="" by * read # The admin dn has full write access, everyone else # can read everything. access to * by dn="cn=admin,dc=localdomain" write by * read # For Netscape Roaming support, each user gets a roaming # profile for which they have write access to #access to dn=".*,ou=Roaming,o=morsnet" # by dn="cn=admin,dc=localdomain" write # by dnattr=owner write ####################################################################### # Specific Directives for database #2, of type 'other' (can be hdb too): # Database specific directives apply to this databasse until another # 'database' directive occurs #database <other> # The base of your directory for database #2 #suffix "dc=debian,dc=org" ####################################################################### # SSL: # Uncomment the following lines to enable SSL and use the default # snakeoil certificates. #TLSCertificateFile /etc/ssl/certs/ssl-cert-snakeoil.pem #TLSCertificateKeyFile /etc/ssl/private/ssl-cert-snakeoil.key TLSCipherSuite TLS_RSA_AES_256_CBC_SHA TLSCACertificateFile /etc/ldap/ssl/server.pem TLSCertificateFile /etc/ldap/ssl/server.pem TLSCertificateKeyFile /etc/ldap/ssl/server.pem My ldap.conf file is # # LDAP Defaults # # See ldap.conf(5) for details # This file should be world readable but not world writable. HOST ldap.natraj.com PORT 636 BASE dc=localdomain URI ldaps://ldap.natraj.com TLS_CACERT /etc/ldap/ssl/server.pem TLS_REQCERT allow #SIZELIMIT 12 #TIMELIMIT 15 #DEREF never

    Read the article

  • jQuery.closest(); traversing down the DOM not up

    - by Alex
    Afternoon peoples. I am having a bit of a nightmare traversing a DOM tree properly. I have the following markup <div class="node" id="first-wh"> <div class="content-heading has-tools"> <div class="tool-menu" style="position: relative"> <span class="menu-open stepper-down"></span> <ul class="tool-menu-tools" style="display:none;"> <li><img src="/resources/includes/images/layout/tools-menu/edit22.png" /> Edit <input type="hidden" class="variables" value="edit,hobbies,text,/theurl" /></li> <li>Menu 2</li> <li>Menu 3</li> </ul> </div> <h3>Employment History</h3></div> <div class="content-body editable disabled"> <h3 class="dates">1st January 2010 - 10th June 2010</h3> <h3>Company</h3> <h4>Some Company</h4> <h3>Job Title</h3> <h4>IT Manager</h4> <h3>Job Description</h3> <p class="desc">I headed up the IT department for all things concerning IT and infrastructure</p> <h3>Roles &amp; Responsibilities</h3> <p class="desc">It is a long established fact that a reader will be distracted by the readable content of a page when looking at its layout. The point of using Lorem Ipsum is that it has a more-or-less normal distribution of letters, as opposed to using 'Content here, content here', making it look like readable English. Many desktop publishing packages and web page editors now use Lorem Ipsum as their default model text, and a search for 'lorem ipsum' will uncover many web sites still in their infancy. Various versions have evolved over the years, sometimes by accident, sometimes on purpose (injected humour and the like).</p> </div> <div class="content-body edit-node edit-node-hide"> <input class="variables" type="hidden" value="id,function-id" /> <h3 class="element-title">Employment Dates</h3> <span class="label">From:</span> <input class="edit-mode date date-from" type="text" value="date" /> <span class="label">To:</span> <input class="edit-mode date date-to" type="text" value="date" /> <h3 class="element-title">Company</h3> <input class="edit-mode" type="text" value="The company I worked for" /> <h3 class="element-title">Job Title</h3> <input class="edit-mode" type="text" value="My job title" /> <h3 class="element-title">Job Description</h3> <textarea class="edit-mode" type="text">The Job Title</textarea> <h3 class="element-title">Roles &amp; Responsibilities</h3> <textarea class="edit-mode" type="text">It is a long established fact that a reader will be distracted by the readable content of a page when looking at its layout. The point of using Lorem Ipsum is that it has a more-or-less normal distribution of letters, as opposed to using 'Content here, content here', making it look like readable English. Many desktop publishing packages and web page editors now use Lorem Ipsum as their default model text, and a search for 'lorem ipsum' will uncover many web sites still in their infancy. Various versions have evolved over the years, sometimes by accident, sometimes on purpose (injected humour and the like).</textarea> <div class="node-actions"> <input type="checkbox" class="checkdisable" value="This is a checkbox"/>This element is visible .<br /> <input type="submit" class="account-button save" value="Save" /> <input type="submit" class="account-button cancel" value="Cancel" /></div> </div></div> ... And I am trying to traverse from input.save at the bottom right the way up to div.node... This all works well with one copy of the markup but if I duplicate it (obvisouly changing the ID of the uppermost div.node and use jQuery.closest('div.node') for the upper of the div.node's it will return the element below it not the element above it (which is the right one). I've tried using parents() but that also has it's caveats. Is there some kind of contexyt that can be attached to closest to make it go up and not down? or is there a better way to do this. jQuery code below. $(".save").click(function(){ var element=$(this); var enodes=element.parents('.edit-node').find('input.variables'); var variables=enodes.val(); var onode=element.closest('div.node').find('.editable'); var enode=element.closest('div.node').find('.edit-node-hide'); var vnode=element.closest('div.node-actions').find('input.checkdisable'); var isvis=(vnode.is(":checked")) ? onode.removeClass('disabled') : onode.addClass('disabled'); onode.slideDown(200); enode.fadeOut(100); }); Thanks in advance. Alex P.S It seems that stackoverflow has done something weird to the markup! - I just triple checked it and it is fine but for some reason it's concate'd it below

    Read the article

  • Codeigniter: Using URIs with forms

    - by Kevin Brown
    I'm using URIs to direct a function in a library: $id = $this->CI->session->userdata('id'); $URI = $this->CI->uri->uri_string(); $new = "new"; if(strpos($URI, $new) === FALSE){ $method = "update"; } elseif(strpos($URI, $new) !== FALSE){ $method = "create"; } So I have two if statements directing what information to if ($method === 'update') { // Modify form, first load $this->CI->db->from('be_survey'); $this->CI->db->where('user_id' , $id); $survey = $this->CI->db->get(); $user = array_merge($user->row_array(),$survey->row_array()); $this->CI->validation->set_default_value($user); // Display page $data['user'] = $user; } $this->CI->validation->set_rules($rules); if ( $this->CI->validation->run() === FALSE ) { // Output any errors $this->CI->validation->output_errors(); } else { // Submit form $this->_submit($method); } Submit function: function _submit($method) { //Submit and Update for current User $id = $this->CI->session->userdata('id'); $this->CI->db->select('users.id, users.username, users.email, profiles.firstname, profiles.manager_id'); $this->CI->db->from('be_users' . " users"); $this->CI->db->join('be_user_profiles' . " profiles",'users.id=profiles.user_id'); $this->CI->db->having('id', $id); $email_data['user'] = $this->CI->db->get(); $email_data['user'] = $email_data['user']->row(); $manager_id = $email_data['user']->manager_id; $this->CI->db->select('firstname','email')->from('be_user_profiles')->where('user_id', $manager_id); $email_data['manager'] = $this->CI->db->get(); $email_data['manager'] = $email_data['manager']->row(); // Fetch what they entered in the form for($i=1;$i<18;$i++){ $survey["a_".$i]= $this->CI->input->post('a_'.$i); } for($i=1;$i<15;$i++){ $survey["b_".$i]= $this->CI->input->post('b_'.$i); } for($i=1;$i<12;$i++){ $survey["c_".$i]= $this->CI->input->post('c_'.$i); } $profile['firstname'] = $this->CI->input->post('firstname'); $profile['lastname'] = $this->CI->input->post('lastname'); $profile['test_date'] = date ("Y-m-d H:i:s"); $profile['company_name'] = $this->CI->input->post('company_name'); $profile['company_address'] = $this->CI->input->post('company_address'); $profile['company_city'] = $this->CI->input->post('company_city'); $profile['company_phone'] = $this->CI->input->post('company_phone'); $profile['company_state'] = $this->CI->input->post('company_state'); $profile['company_zip'] = $this->CI->input->post('company_zip'); $profile['job_title'] = $this->CI->input->post('job_title'); $profile['job_type'] = $this->CI->input->post('job_type'); $profile['job_time'] = $this->CI->input->post('job_time'); $profile['department'] = $this->CI->input->post('department'); $profile['vision'] = $this->CI->input->post('vision'); $profile['height'] = $this->CI->input->post('height'); $profile['weight'] = $this->CI->input->post('weight'); $profile['hand_dominance'] = $this->CI->input->post('hand_dominance'); $profile['areas_of_fatigue'] = $this->CI->input->post('areas_of_fatigue'); $profile['job_description'] = $this->CI->input->post('job_description'); $profile['injury_review'] = $this->CI->input->post('injury_review'); $profile['job_positive'] = $this->CI->input->post('job_positive'); $profile['risk_factors'] = $this->CI->input->post('risk_factors'); $profile['job_improvement_short'] = $this->CI->input->post('job_improvement_short'); $profile['job_improvement_long'] = $this->CI->input->post('job_improvement_long'); if ($method == "update") { //Begin db transmission $this->CI->db->trans_begin(); $this->CI->home_model->update('Survey',$survey, array('user_id' => $id)); $this->CI->db->update('be_user_profiles',$profile, array('user_id' => $id)); if ($this->CI->db->trans_status() === FALSE) { flashMsg('error','There was a problem entering your test! Please contact an administrator.'); redirect('survey','location'); } else { //Get credits of user and subtract 1 $this->CI->db->set('credits', 'credits -1', FALSE); $this->CI->db->update('be_user_profiles',$profile, array('user_id' => $manager_id)); //Mark the form completed. $this->CI->db->set('test_complete', '1'); $this->CI->db->where('user_id', $id)->update('be_user_profiles'); // Stuff worked... $this->CI->db->trans_commit(); //Get Manager Information $this->CI->db->select('users.id, users.username, users.email, profiles.firstname'); $this->CI->db->from('be_users' . " users"); $this->CI->db->join('be_user_profiles' . " profiles",'users.id=profiles.user_id'); $this->CI->db->having('id', $email_data['user']->manager_id); $email_data['manager'] = $this->CI->db->get(); $email_data['manager'] = $email_data['manager']->row(); //Email User $this->CI->load->library('User_email'); $data_user = array( 'firstname'=>$email_data['user']->firstname, 'email'=> $email_data['user']->email, 'user_completed'=>$email_data['user']->firstname, 'site_name'=>$this->CI->preference->item('site_name'), 'site_url'=>base_url() ); //Email Manager $data_manager = array( 'firstname'=>$email_data['manager']->firstname, 'email'=> $email_data['manager']->email, 'user_completed'=>$email_data['user']->firstname, 'site_name'=>$this->CI->preference->item('site_name'), 'site_url'=>base_url() ); $this->CI->user_email->send($email_data['manager']->email,'Completed the Assessment Tool','public/email_manager_complete',$data_manager); $this->CI->user_email->send($email_data['user']->email,'Completed the Assessment Tool','public/email_user_complete',$data_user); flashMsg('success','You finished the assessment successfully!'); redirect('home','location'); } } //Create New User elseif ($method == "create") { // Build $profile['user_id'] = $id; $profile['manager_id'] = $manager_id; $profile['test_complete'] = '1'; $survey['user_id'] = $id; $this->CI->db->trans_begin(); // Add user_profile details to DB $this->CI->db->insert('be_user_profiles',$profile); $this->CI->db->insert('be_survey',$survey); if ($this->CI->db->trans_status() === FALSE) { // Registration failed $this->CI->db->trans_rollback(); flashMsg('error',$this->CI->lang->line('userlib_registration_failed')); redirect('auth/register','location'); } else { // User registered $this->CI->db->trans_commit(); flashMsg('success',$this->CI->lang->line('userlib_registration_success')); redirect($this->CI->config->item('userlib_action_register'),'location'); } } } The submit function is similar, updating the db if $method == "update", and inserting if the method == "create". The problem is, when the form is submitted, it doesn't take into account the url b/c the form submits to the function "survey", which passes data to the lib function, so things are always updated, never created. *How can I pass $method to the _submit() function correctly?!*

    Read the article

  • How to generate DELETE statements in PL/SQL, based on the tables FK relations?

    - by The chicken in the kitchen
    Is it possible via script/tool to generate authomatically many delete statements based on the tables fk relations, using Oracle PL/SQL? In example: I have the table: CHICKEN (CHICKEN_CODE NUMBER) and there are 30 tables with fk references to its CHICKEN_CODE that I need to delete; there are also other 150 tables foreign-key-linked to that 30 tables that I need to delete first. Is there some tool/script PL/SQL that I can run in order to generate all the necessary delete statements based on the FK relations for me? (by the way, I know about cascade delete on the relations, but please pay attention: I CAN'T USE IT IN MY PRODUCTION DATABASE, because it's dangerous!) I'm using Oracle DataBase 10G R2. This is the result I've written, but it is not recursive: This is a view I have previously written, but of course it is not recursive! CREATE OR REPLACE FORCE VIEW RUN ( OWNER_1, CONSTRAINT_NAME_1, TABLE_NAME_1, TABLE_NAME, VINCOLO ) AS SELECT OWNER_1, CONSTRAINT_NAME_1, TABLE_NAME_1, TABLE_NAME, '(' || LTRIM ( EXTRACT (XMLAGG (XMLELEMENT ("x", ',' || COLUMN_NAME)), '/x/text()'), ',') || ')' VINCOLO FROM ( SELECT CON1.OWNER OWNER_1, CON1.TABLE_NAME TABLE_NAME_1, CON1.CONSTRAINT_NAME CONSTRAINT_NAME_1, CON1.DELETE_RULE, CON1.STATUS, CON.TABLE_NAME, CON.CONSTRAINT_NAME, COL.POSITION, COL.COLUMN_NAME FROM DBA_CONSTRAINTS CON, DBA_CONS_COLUMNS COL, DBA_CONSTRAINTS CON1 WHERE CON.OWNER = 'TABLE_OWNER' AND CON.TABLE_NAME = 'TABLE_OWNED' AND ( (CON.CONSTRAINT_TYPE = 'P') OR (CON.CONSTRAINT_TYPE = 'U')) AND COL.TABLE_NAME = CON1.TABLE_NAME AND COL.CONSTRAINT_NAME = CON1.CONSTRAINT_NAME --AND CON1.OWNER = CON.OWNER AND CON1.R_CONSTRAINT_NAME = CON.CONSTRAINT_NAME AND CON1.CONSTRAINT_TYPE = 'R' GROUP BY CON1.OWNER, CON1.TABLE_NAME, CON1.CONSTRAINT_NAME, CON1.DELETE_RULE, CON1.STATUS, CON.TABLE_NAME, CON.CONSTRAINT_NAME, COL.POSITION, COL.COLUMN_NAME) GROUP BY OWNER_1, CONSTRAINT_NAME_1, TABLE_NAME_1, TABLE_NAME; ... and it contains the error of using DBA_CONSTRAINTS instead of ALL_CONSTRAINTS... Please pay attention to this: http://stackoverflow.com/questions/485581/generate-delete-statement-from-foreign-key-relationships-in-sql-2008/2677145#2677145 Another user has just written it in SQL SERVER 2008, anyone is able to convert to Oracle 10G PL/SQL? I am not able to... :-( This is the code written by another user in SQL SERVER 2008: DECLARE @COLUMN_NAME AS sysname DECLARE @TABLE_NAME AS sysname DECLARE @IDValue AS int SET @COLUMN_NAME = '<Your COLUMN_NAME here>' SET @TABLE_NAME = '<Your TABLE_NAME here>' SET @IDValue = 123456789 DECLARE @sql AS varchar(max) ; WITH RELATED_COLUMNS AS ( SELECT QUOTENAME(c.TABLE_SCHEMA) + '.' + QUOTENAME(c.TABLE_NAME) AS [OBJECT_NAME] ,c.COLUMN_NAME FROM PBANKDW.INFORMATION_SCHEMA.COLUMNS AS c WITH (NOLOCK) INNER JOIN PBANKDW.INFORMATION_SCHEMA.TABLES AS t WITH (NOLOCK) ON c.TABLE_CATALOG = t.TABLE_CATALOG AND c.TABLE_SCHEMA = t.TABLE_SCHEMA AND c.TABLE_NAME = t.TABLE_NAME AND t.TABLE_TYPE = 'BASE TABLE' INNER JOIN ( SELECT rc.CONSTRAINT_CATALOG ,rc.CONSTRAINT_SCHEMA ,lkc.TABLE_NAME ,lkc.COLUMN_NAME FROM PBANKDW.INFORMATION_SCHEMA.REFERENTIAL_CONSTRAINTS rc WITH (NOLOCK) INNER JOIN PBANKDW.INFORMATION_SCHEMA.KEY_COLUMN_USAGE lkc WITH (NOLOCK) ON lkc.CONSTRAINT_CATALOG = rc.CONSTRAINT_CATALOG AND lkc.CONSTRAINT_SCHEMA = rc.CONSTRAINT_SCHEMA AND lkc.CONSTRAINT_NAME = rc.CONSTRAINT_NAME INNER JOIN PBANKDW.INFORMATION_SCHEMA.TABLE_CONSTRAINTS tc WITH (NOLOCK) ON rc.CONSTRAINT_CATALOG = tc.CONSTRAINT_CATALOG AND rc.CONSTRAINT_SCHEMA = tc.CONSTRAINT_SCHEMA AND rc.UNIQUE_CONSTRAINT_NAME = tc.CONSTRAINT_NAME INNER JOIN PBANKDW.INFORMATION_SCHEMA.KEY_COLUMN_USAGE rkc WITH (NOLOCK) ON rkc.CONSTRAINT_CATALOG = tc.CONSTRAINT_CATALOG AND rkc.CONSTRAINT_SCHEMA = tc.CONSTRAINT_SCHEMA AND rkc.CONSTRAINT_NAME = tc.CONSTRAINT_NAME WHERE rkc.COLUMN_NAME = @COLUMN_NAME AND rkc.TABLE_NAME = @TABLE_NAME ) AS j ON j.CONSTRAINT_CATALOG = c.TABLE_CATALOG AND j.CONSTRAINT_SCHEMA = c.TABLE_SCHEMA AND j.TABLE_NAME = c.TABLE_NAME AND j.COLUMN_NAME = c.COLUMN_NAME ) SELECT @sql = COALESCE(@sql, '') + 'DELETE FROM ' + [OBJECT_NAME] + ' WHERE ' + [COLUMN_NAME] + ' = ' + CONVERT(varchar, @IDValue) + CHAR(13) + CHAR(10) FROM RELATED_COLUMNS PRINT @sql Thank to Charles, this is the latest not working release of the software, I have added a parameter with the OWNER because the referential integrities propagate through about 5 other Oracle users (!!!): CREATE OR REPLACE PROCEDURE delete_cascade ( parent_table VARCHAR2, parent_table_owner VARCHAR2) IS cons_name VARCHAR2 (30); tab_name VARCHAR2 (30); tab_name_owner VARCHAR2 (30); parent_cons VARCHAR2 (30); parent_col VARCHAR2 (30); delete1 VARCHAR (500); delete2 VARCHAR (500); delete_command VARCHAR (4000); CURSOR cons_cursor IS SELECT constraint_name, r_constraint_name, table_name, constraint_type FROM all_constraints WHERE constraint_type = 'R' AND r_constraint_name IN (SELECT constraint_name FROM all_constraints WHERE constraint_type IN ('P', 'U') AND table_name = parent_table AND owner = parent_table_owner) AND delete_rule = 'NO ACTION'; CURSOR tabs_cursor IS SELECT DISTINCT table_name FROM all_cons_columns WHERE constraint_name = cons_name; CURSOR child_cols_cursor IS SELECT column_name, position FROM all_cons_columns WHERE constraint_name = cons_name AND table_name = tab_name; BEGIN FOR cons IN cons_cursor LOOP cons_name := cons.constraint_name; parent_cons := cons.r_constraint_name; SELECT DISTINCT table_name, owner INTO tab_name, tab_name_owner FROM all_cons_columns WHERE constraint_name = cons_name; delete_cascade (tab_name, tab_name_owner); delete_command := ''; delete1 := ''; delete2 := ''; FOR col IN child_cols_cursor LOOP SELECT DISTINCT column_name INTO parent_col FROM all_cons_columns WHERE constraint_name = parent_cons AND position = col.position; IF delete1 IS NULL THEN delete1 := col.column_name; ELSE delete1 := delete1 || ', ' || col.column_name; END IF; IF delete2 IS NULL THEN delete2 := parent_col; ELSE delete2 := delete2 || ', ' || parent_col; END IF; END LOOP; delete_command := 'delete from ' || tab_name_owner || '.' || tab_name || ' where (' || delete1 || ') in (select ' || delete2 || ' from ' || parent_table_owner || '.' || parent_table || ');'; INSERT INTO ris VALUES (SEQUENCE_COMANDI.NEXTVAL, delete_command); COMMIT; END LOOP; END; / In the cursor CONS_CURSOR I have added the condition: AND delete_rule = 'NO ACTION'; in order to avoid deletion in case of referential integrities with DELETE_RULE = 'CASCADE' or DELETE_RULE = 'SET NULL'. Now I have tried to turn from stored procedure to stored function, but the delete statements are not correct: CREATE OR REPLACE FUNCTION deletecascade ( parent_table VARCHAR2, parent_table_owner VARCHAR2) RETURN VARCHAR2 IS cons_name VARCHAR2 (30); tab_name VARCHAR2 (30); tab_name_owner VARCHAR2 (30); parent_cons VARCHAR2 (30); parent_col VARCHAR2 (30); delete1 VARCHAR (500); delete2 VARCHAR (500); delete_command VARCHAR (4000); AT_LEAST_ONE_ITERATION NUMBER DEFAULT 0; CURSOR cons_cursor IS SELECT constraint_name, r_constraint_name, table_name, constraint_type FROM all_constraints WHERE constraint_type = 'R' AND r_constraint_name IN (SELECT constraint_name FROM all_constraints WHERE constraint_type IN ('P', 'U') AND table_name = parent_table AND owner = parent_table_owner) AND delete_rule = 'NO ACTION'; CURSOR tabs_cursor IS SELECT DISTINCT table_name FROM all_cons_columns WHERE constraint_name = cons_name; CURSOR child_cols_cursor IS SELECT column_name, position FROM all_cons_columns WHERE constraint_name = cons_name AND table_name = tab_name; BEGIN FOR cons IN cons_cursor LOOP AT_LEAST_ONE_ITERATION := 1; cons_name := cons.constraint_name; parent_cons := cons.r_constraint_name; SELECT DISTINCT table_name, owner INTO tab_name, tab_name_owner FROM all_cons_columns WHERE constraint_name = cons_name; delete1 := ''; delete2 := ''; FOR col IN child_cols_cursor LOOP SELECT DISTINCT column_name INTO parent_col FROM all_cons_columns WHERE constraint_name = parent_cons AND position = col.position; IF delete1 IS NULL THEN delete1 := col.column_name; ELSE delete1 := delete1 || ', ' || col.column_name; END IF; IF delete2 IS NULL THEN delete2 := parent_col; ELSE delete2 := delete2 || ', ' || parent_col; END IF; END LOOP; delete_command := 'delete from ' || tab_name_owner || '.' || tab_name || ' where (' || delete1 || ') in (select ' || delete2 || ' from ' || parent_table_owner || '.' || parent_table || ');' || deletecascade (tab_name, tab_name_owner); INSERT INTO ris VALUES (SEQUENCE_COMANDI.NEXTVAL, delete_command); COMMIT; END LOOP; IF AT_LEAST_ONE_ITERATION = 1 THEN RETURN ' where COD_CHICKEN = V_CHICKEN AND COD_NATION = V_NATION;'; ELSE RETURN NULL; END IF; END; / Please assume that V_CHICKEN and V_NATION are the criteria to select the CHICKEN to delete from the root table: the condition is: "where COD_CHICKEN = V_CHICKEN AND COD_NATION = V_NATION" on the root table.

    Read the article

  • Can't figure out where race condition is occuring

    - by Nik
    I'm using Valgrind --tool=drd to check my application that uses Boost::thread. Basically, the application populates a set of "Book" values with "Kehai" values based on inputs through a socket connection. On a seperate thread, a user can connect and get the books send to them. Its fairly simple, so i figured using a boost::mutex::scoped_lock on the location that serializes the book and the location that clears out the book data should be suffice to prevent any race conditions. Here is the code: void Book::clear() { boost::mutex::scoped_lock lock(dataMutex); for(int i =NUM_KEHAI-1; i >= 0; --i) { bid[i].clear(); ask[i].clear(); } } int Book::copyChangedKehaiToString(char* dst) const { boost::mutex::scoped_lock lock(dataMutex); sprintf(dst, "%-4s%-13s",market.c_str(),meigara.c_str()); int loc = 17; for(int i = 0; i < Book::NUM_KEHAI; ++i) { if(ask[i].changed > 0) { sprintf(dst+loc,"A%i%-21s%-21s%-21s%-8s%-4s",i,ask[i].price.c_str(),ask[i].volume.c_str(),ask[i].number.c_str(),ask[i].postTime.c_str(),ask[i].status.c_str()); loc += 77; } } for(int i = 0; i < Book::NUM_KEHAI; ++i) { if(bid[i].changed > 0) { sprintf(dst+loc,"B%i%-21s%-21s%-21s%-8s%-4s",i,bid[i].price.c_str(),bid[i].volume.c_str(),bid[i].number.c_str(),bid[i].postTime.c_str(),bid[i].status.c_str()); loc += 77; } } return loc; } The clear() function and the copyChangedKehaiToString() function are called in the datagetting thread and data sending thread,respectively. Also, as a note, the class Book: struct Book { private: Book(const Book&); Book& operator=(const Book&); public: static const int NUM_KEHAI=10; struct Kehai; friend struct Book::Kehai; struct Kehai { private: Kehai& operator=(const Kehai&); public: std::string price; std::string volume; std::string number; std::string postTime; std::string status; int changed; Kehai(); void copyFrom(const Kehai& other); Kehai(const Kehai& other); inline void clear() { price.assign(""); volume.assign(""); number.assign(""); postTime.assign(""); status.assign(""); changed = -1; } }; std::vector<Kehai> bid; std::vector<Kehai> ask; tm recTime; mutable boost::mutex dataMutex; Book(); void clear(); int copyChangedKehaiToString(char * dst) const; }; When using valgrind --tool=drd, i get race condition errors such as the one below: ==26330== Conflicting store by thread 1 at 0x0658fbb0 size 4 ==26330== at 0x653AE68: std::string::_M_mutate(unsigned int, unsigned int, unsigned int) (in /usr/lib/libstdc++.so.6.0.8) ==26330== by 0x653AFC9: std::string::_M_replace_safe(unsigned int, unsigned int, char const*, unsigned int) (in /usr/lib/libstdc++.so.6.0.8) ==26330== by 0x653B064: std::string::assign(char const*, unsigned int) (in /usr/lib/libstdc++.so.6.0.8) ==26330== by 0x653B134: std::string::assign(char const*) (in /usr/lib/libstdc++.so.6.0.8) ==26330== by 0x8055D64: Book::Kehai::clear() (Book.h:50) ==26330== by 0x8094A29: Book::clear() (Book.cpp:78) ==26330== by 0x808537E: RealKernel::start() (RealKernel.cpp:86) ==26330== by 0x804D15A: main (main.cpp:164) ==26330== Allocation context: BSS section of /usr/lib/libstdc++.so.6.0.8 ==26330== Other segment start (thread 2) ==26330== at 0x400BB59: pthread_mutex_unlock (drd_pthread_intercepts.c:633) ==26330== by 0xC59565: pthread_mutex_unlock (in /lib/libc-2.5.so) ==26330== by 0x805477C: boost::mutex::unlock() (mutex.hpp:56) ==26330== by 0x80547C9: boost::unique_lock<boost::mutex>::~unique_lock() (locks.hpp:340) ==26330== by 0x80949BA: Book::copyChangedKehaiToString(char*) const (Book.cpp:134) ==26330== by 0x80937EE: BookSerializer::serializeBook(Book const&, std::string const&) (BookSerializer.cpp:41) ==26330== by 0x8092D05: BookSnapshotManager::getSnaphotDataList() (BookSnapshotManager.cpp:72) ==26330== by 0x8088179: SnapshotServer::getDataList() (SnapshotServer.cpp:246) ==26330== by 0x808870F: SnapshotServer::run() (SnapshotServer.cpp:183) ==26330== by 0x808BAF5: boost::_mfi::mf0<void, RealThread>::operator()(RealThread*) const (mem_fn_template.hpp:49) ==26330== by 0x808BB4D: void boost::_bi::list1<boost::_bi::value<RealThread*> >::operator()<boost::_mfi::mf0<void, RealThread>, boost::_bi::list0>(boost::_bi::type<void>, boost::_mfi::mf0<void, RealThread>&, boost::_bi::list0&, int) (bind.hpp:253) ==26330== by 0x808BB90: boost::_bi::bind_t<void, boost::_mfi::mf0<void, RealThread>, boost::_bi::list1<boost::_bi::value<RealThread*> > >::operator()() (bind_template.hpp:20) ==26330== Other segment end (thread 2) ==26330== at 0x400B62A: pthread_mutex_lock (drd_pthread_intercepts.c:580) ==26330== by 0xC59535: pthread_mutex_lock (in /lib/libc-2.5.so) ==26330== by 0x80546B8: boost::mutex::lock() (mutex.hpp:51) ==26330== by 0x805473B: boost::unique_lock<boost::mutex>::lock() (locks.hpp:349) ==26330== by 0x8054769: boost::unique_lock<boost::mutex>::unique_lock(boost::mutex&) (locks.hpp:227) ==26330== by 0x8094711: Book::copyChangedKehaiToString(char*) const (Book.cpp:113) ==26330== by 0x80937EE: BookSerializer::serializeBook(Book const&, std::string const&) (BookSerializer.cpp:41) ==26330== by 0x808870F: SnapshotServer::run() (SnapshotServer.cpp:183) ==26330== by 0x808BAF5: boost::_mfi::mf0<void, RealThread>::operator()(RealThread*) const (mem_fn_template.hpp:49) ==26330== by 0x808BB4D: void boost::_bi::list1<boost::_bi::value<RealThread*> >::operator()<boost::_mfi::mf0<void, RealThread>, boost::_bi::list0>(boost::_bi::type<void>, boost::_mfi::mf0<void, RealThread>&, boost::_bi::list0&, int) (bind.hpp:253) For the life of me, i can't figure out where the race condition is. As far as I can tell, clearing the kehai is done only after having taken the mutex, and the same holds true with copying it to a string. Does anyone have any ideas what could be causing this, or where I should look? Thank you kindly.

    Read the article

  • Inheritance Mapping Strategies with Entity Framework Code First CTP5 Part 1: Table per Hierarchy (TPH)

    - by mortezam
    A simple strategy for mapping classes to database tables might be “one table for every entity persistent class.” This approach sounds simple enough and, indeed, works well until we encounter inheritance. Inheritance is such a visible structural mismatch between the object-oriented and relational worlds because object-oriented systems model both “is a” and “has a” relationships. SQL-based models provide only "has a" relationships between entities; SQL database management systems don’t support type inheritance—and even when it’s available, it’s usually proprietary or incomplete. There are three different approaches to representing an inheritance hierarchy: Table per Hierarchy (TPH): Enable polymorphism by denormalizing the SQL schema, and utilize a type discriminator column that holds type information. Table per Type (TPT): Represent "is a" (inheritance) relationships as "has a" (foreign key) relationships. Table per Concrete class (TPC): Discard polymorphism and inheritance relationships completely from the SQL schema.I will explain each of these strategies in a series of posts and this one is dedicated to TPH. In this series we'll deeply dig into each of these strategies and will learn about "why" to choose them as well as "how" to implement them. Hopefully it will give you a better idea about which strategy to choose in a particular scenario. Inheritance Mapping with Entity Framework Code FirstAll of the inheritance mapping strategies that we discuss in this series will be implemented by EF Code First CTP5. The CTP5 build of the new EF Code First library has been released by ADO.NET team earlier this month. EF Code-First enables a pretty powerful code-centric development workflow for working with data. I’m a big fan of the EF Code First approach, and I’m pretty excited about a lot of productivity and power that it brings. When it comes to inheritance mapping, not only Code First fully supports all the strategies but also gives you ultimate flexibility to work with domain models that involves inheritance. The fluent API for inheritance mapping in CTP5 has been improved a lot and now it's more intuitive and concise in compare to CTP4. A Note For Those Who Follow Other Entity Framework ApproachesIf you are following EF's "Database First" or "Model First" approaches, I still recommend to read this series since although the implementation is Code First specific but the explanations around each of the strategies is perfectly applied to all approaches be it Code First or others. A Note For Those Who are New to Entity Framework and Code-FirstIf you choose to learn EF you've chosen well. If you choose to learn EF with Code First you've done even better. To get started, you can find a great walkthrough by Scott Guthrie here and another one by ADO.NET team here. In this post, I assume you already setup your machine to do Code First development and also that you are familiar with Code First fundamentals and basic concepts. You might also want to check out my other posts on EF Code First like Complex Types and Shared Primary Key Associations. A Top Down Development ScenarioThese posts take a top-down approach; it assumes that you’re starting with a domain model and trying to derive a new SQL schema. Therefore, we start with an existing domain model, implement it in C# and then let Code First create the database schema for us. However, the mapping strategies described are just as relevant if you’re working bottom up, starting with existing database tables. I’ll show some tricks along the way that help you dealing with nonperfect table layouts. Let’s start with the mapping of entity inheritance. -- The Domain ModelIn our domain model, we have a BillingDetail base class which is abstract (note the italic font on the UML class diagram below). We do allow various billing types and represent them as subclasses of BillingDetail class. As for now, we support CreditCard and BankAccount: Implement the Object Model with Code First As always, we start with the POCO classes. Note that in our DbContext, I only define one DbSet for the base class which is BillingDetail. Code First will find the other classes in the hierarchy based on Reachability Convention. public abstract class BillingDetail  {     public int BillingDetailId { get; set; }     public string Owner { get; set; }             public string Number { get; set; } } public class BankAccount : BillingDetail {     public string BankName { get; set; }     public string Swift { get; set; } } public class CreditCard : BillingDetail {     public int CardType { get; set; }                     public string ExpiryMonth { get; set; }     public string ExpiryYear { get; set; } } public class InheritanceMappingContext : DbContext {     public DbSet<BillingDetail> BillingDetails { get; set; } } This object model is all that is needed to enable inheritance with Code First. If you put this in your application you would be able to immediately start working with the database and do CRUD operations. Before going into details about how EF Code First maps this object model to the database, we need to learn about one of the core concepts of inheritance mapping: polymorphic and non-polymorphic queries. Polymorphic Queries LINQ to Entities and EntitySQL, as object-oriented query languages, both support polymorphic queries—that is, queries for instances of a class and all instances of its subclasses, respectively. For example, consider the following query: IQueryable<BillingDetail> linqQuery = from b in context.BillingDetails select b; List<BillingDetail> billingDetails = linqQuery.ToList(); Or the same query in EntitySQL: string eSqlQuery = @"SELECT VAlUE b FROM BillingDetails AS b"; ObjectQuery<BillingDetail> objectQuery = ((IObjectContextAdapter)context).ObjectContext                                                                          .CreateQuery<BillingDetail>(eSqlQuery); List<BillingDetail> billingDetails = objectQuery.ToList(); linqQuery and eSqlQuery are both polymorphic and return a list of objects of the type BillingDetail, which is an abstract class but the actual concrete objects in the list are of the subtypes of BillingDetail: CreditCard and BankAccount. Non-polymorphic QueriesAll LINQ to Entities and EntitySQL queries are polymorphic which return not only instances of the specific entity class to which it refers, but all subclasses of that class as well. On the other hand, Non-polymorphic queries are queries whose polymorphism is restricted and only returns instances of a particular subclass. In LINQ to Entities, this can be specified by using OfType<T>() Method. For example, the following query returns only instances of BankAccount: IQueryable<BankAccount> query = from b in context.BillingDetails.OfType<BankAccount>() select b; EntitySQL has OFTYPE operator that does the same thing: string eSqlQuery = @"SELECT VAlUE b FROM OFTYPE(BillingDetails, Model.BankAccount) AS b"; In fact, the above query with OFTYPE operator is a short form of the following query expression that uses TREAT and IS OF operators: string eSqlQuery = @"SELECT VAlUE TREAT(b as Model.BankAccount)                       FROM BillingDetails AS b                       WHERE b IS OF(Model.BankAccount)"; (Note that in the above query, Model.BankAccount is the fully qualified name for BankAccount class. You need to change "Model" with your own namespace name.) Table per Class Hierarchy (TPH)An entire class hierarchy can be mapped to a single table. This table includes columns for all properties of all classes in the hierarchy. The concrete subclass represented by a particular row is identified by the value of a type discriminator column. You don’t have to do anything special in Code First to enable TPH. It's the default inheritance mapping strategy: This mapping strategy is a winner in terms of both performance and simplicity. It’s the best-performing way to represent polymorphism—both polymorphic and nonpolymorphic queries perform well—and it’s even easy to implement by hand. Ad-hoc reporting is possible without complex joins or unions. Schema evolution is straightforward. Discriminator Column As you can see in the DB schema above, Code First has to add a special column to distinguish between persistent classes: the discriminator. This isn’t a property of the persistent class in our object model; it’s used internally by EF Code First. By default, the column name is "Discriminator", and its type is string. The values defaults to the persistent class names —in this case, “BankAccount” or “CreditCard”. EF Code First automatically sets and retrieves the discriminator values. TPH Requires Properties in SubClasses to be Nullable in the Database TPH has one major problem: Columns for properties declared by subclasses will be nullable in the database. For example, Code First created an (INT, NULL) column to map CardType property in CreditCard class. However, in a typical mapping scenario, Code First always creates an (INT, NOT NULL) column in the database for an int property in persistent class. But in this case, since BankAccount instance won’t have a CardType property, the CardType field must be NULL for that row so Code First creates an (INT, NULL) instead. If your subclasses each define several non-nullable properties, the loss of NOT NULL constraints may be a serious problem from the point of view of data integrity. TPH Violates the Third Normal FormAnother important issue is normalization. We’ve created functional dependencies between nonkey columns, violating the third normal form. Basically, the value of Discriminator column determines the corresponding values of the columns that belong to the subclasses (e.g. BankName) but Discriminator is not part of the primary key for the table. As always, denormalization for performance can be misleading, because it sacrifices long-term stability, maintainability, and the integrity of data for immediate gains that may be also achieved by proper optimization of the SQL execution plans (in other words, ask your DBA). Generated SQL QueryLet's take a look at the SQL statements that EF Code First sends to the database when we write queries in LINQ to Entities or EntitySQL. For example, the polymorphic query for BillingDetails that you saw, generates the following SQL statement: SELECT  [Extent1].[Discriminator] AS [Discriminator],  [Extent1].[BillingDetailId] AS [BillingDetailId],  [Extent1].[Owner] AS [Owner],  [Extent1].[Number] AS [Number],  [Extent1].[BankName] AS [BankName],  [Extent1].[Swift] AS [Swift],  [Extent1].[CardType] AS [CardType],  [Extent1].[ExpiryMonth] AS [ExpiryMonth],  [Extent1].[ExpiryYear] AS [ExpiryYear] FROM [dbo].[BillingDetails] AS [Extent1] WHERE [Extent1].[Discriminator] IN ('BankAccount','CreditCard') Or the non-polymorphic query for the BankAccount subclass generates this SQL statement: SELECT  [Extent1].[BillingDetailId] AS [BillingDetailId],  [Extent1].[Owner] AS [Owner],  [Extent1].[Number] AS [Number],  [Extent1].[BankName] AS [BankName],  [Extent1].[Swift] AS [Swift] FROM [dbo].[BillingDetails] AS [Extent1] WHERE [Extent1].[Discriminator] = 'BankAccount' Note how Code First adds a restriction on the discriminator column and also how it only selects those columns that belong to BankAccount entity. Change Discriminator Column Data Type and Values With Fluent API Sometimes, especially in legacy schemas, you need to override the conventions for the discriminator column so that Code First can work with the schema. The following fluent API code will change the discriminator column name to "BillingDetailType" and the values to "BA" and "CC" for BankAccount and CreditCard respectively: protected override void OnModelCreating(System.Data.Entity.ModelConfiguration.ModelBuilder modelBuilder) {     modelBuilder.Entity<BillingDetail>()                 .Map<BankAccount>(m => m.Requires("BillingDetailType").HasValue("BA"))                 .Map<CreditCard>(m => m.Requires("BillingDetailType").HasValue("CC")); } Also, changing the data type of discriminator column is interesting. In the above code, we passed strings to HasValue method but this method has been defined to accepts a type of object: public void HasValue(object value); Therefore, if for example we pass a value of type int to it then Code First not only use our desired values (i.e. 1 & 2) in the discriminator column but also changes the column type to be (INT, NOT NULL): modelBuilder.Entity<BillingDetail>()             .Map<BankAccount>(m => m.Requires("BillingDetailType").HasValue(1))             .Map<CreditCard>(m => m.Requires("BillingDetailType").HasValue(2)); SummaryIn this post we learned about Table per Hierarchy as the default mapping strategy in Code First. The disadvantages of the TPH strategy may be too serious for your design—after all, denormalized schemas can become a major burden in the long run. Your DBA may not like it at all. In the next post, we will learn about Table per Type (TPT) strategy that doesn’t expose you to this problem. References ADO.NET team blog Java Persistence with Hibernate book a { text-decoration: none; } a:visited { color: Blue; } .title { padding-bottom: 5px; font-family: Segoe UI; font-size: 11pt; font-weight: bold; padding-top: 15px; } .code, .typeName { font-family: consolas; } .typeName { color: #2b91af; } .padTop5 { padding-top: 5px; } .padTop10 { padding-top: 10px; } p.MsoNormal { margin-top: 0in; margin-right: 0in; margin-bottom: 10.0pt; margin-left: 0in; line-height: 115%; font-size: 11.0pt; font-family: "Calibri" , "sans-serif"; }

    Read the article

  • SQLAuthority News – TechEd India – April 12-14, 2010 Bangalore – An Unforgettable Experience – An Op

    - by pinaldave
    TechEd India was one of the largest Technology events in India led by Microsoft. This event was attended by more than 3,000 technology enthusiasts, making it one of the most well-organized events of the year. Though I attempted to attend almost all the technology events here, I have not seen any bigger or better event in Indian subcontinents other than this. There are 21 Technical Tracks at Tech·Ed India 2010 that span more than 745 learning opportunities. I was fortunate enough to be a part of this whole event as a speaker and a delegate, as well. TechEd India Speaker Badge and A Token of Lifetime Hotel Selection I presented three different sessions at TechEd India and was also a part of panel discussion. (The details of the sessions are given at the end of this blog post.) Due to extensive traveling, I stay away from my family occasionally. For this reason, I took my wife – Nupur and daughter Shaivi (8 months old) to the event along with me. We stayed at the same hotel where the event was organized so as to maximize my time bonding with my family and to have more time in networking with technology community, at the same time. The hotel Lalit Ashok is the largest and most luxurious venue one can find in Bangalore, located in the middle of the city. The cost of the hotel was a bit pricey, but looking at all the advantages, I had decided to ask for a booking there. Hotel Lalit Ashok Nupur Dave and Shaivi Dave Arrival Day – DAY 0 – April 11, 2010 I reached the event a day earlier, and that was one wise decision for I was able to relax a bit and go over my presentation for the next day’s course. I am a kind of person who likes to get everything ready ahead of time. I was also able to enjoy a pleasant evening with several Microsoft employees and my family friends. I even checked out the location where I would be doing presentations the next day. I was fortunate enough to meet Bijoy Singhal from Microsoft who helped me out with a few of the logistics issues that occured the day before. I was not aware of the fact that the very next day he was going to be “The Man” of the TechEd 2010 event. Vinod Kumar from Microsoft was really very kind as he talked to me regarding my subsequent session. He gave me some suggestions which were really helpful that I was able to incorporate them during my presentation. Finally, I was able to meet Abhishek Kant from Microsoft; his valuable suggestions and unlimited passion have inspired many people like me to work with the Community. Pradipta from Microsoft was also around, being extremely busy with logistics; however, in those busy times, he did find some good spare time to have a chat with me and the other Community leaders. I also met Harish Ranganathan and Sachin Rathi, both from Microsoft. It was so interesting to listen to both of them talking about SharePoint. I just have no words to express my overwhelmed spirit because of all these passionate young guys - Pradipta,Vinod, Bijoy, Harish, Sachin and Ahishek (of course!). Map of TechEd India 2010 Event Day 1 – April 12, 2010 From morning until night time, today was truly a very busy day for me. I had two presentations and one panel discussion for the day. Needless to say, I had a few meetings to attend as well. The day started with a keynote from S. Somaseger where he announced the launch of Visual Studio 2010. The keynote area was really eye-catching because of the very large, bigger-than- life uniform screen. This was truly one to show. The title music of the keynote was very interesting and it featured Bijoy Singhal as the model. It was interesting to talk to him afterwards, when we laughed at jokes together about his modeling assignment. TechEd India Keynote Opening Featuring Bijoy TechEd India 2010 Keynote – S. Somasegar Time: 11:15pm – 11:45pm Session 1: True Lies of SQL Server – SQL Myth Buster Following the excellent keynote, I had my very first session on the subject of SQL Server Myth Buster. At first, I was a bit nervous as right after the keynote, for this was my very first session and during my presentation I saw lots of Microsoft Product Team members. Well, it really went well and I had a really good discussion with attendees of the session. I felt that a well begin was half-done and my confidence was regained. Right after the session, I met a few of my Community friends and had meaningful discussions with them on many subjects. The abstract of the session is as follows: In this 30-minute demo session, I am going to briefly demonstrate few SQL Server Myths and their resolutions as I back them up with some demo. This demo presentation is a must-attend for all developers and administrators who would come to the event. This is going to be a very quick yet fun session. Pinal Presenting session at TechEd India 2010 Time: 1:00 PM – 2:00 PM Lunch with Somasegar After the session I went to see my daughter, and then I headed right away to the lunch with S. Somasegar – the keynote speaker and senior vice president of the Developer Division at Microsoft. I really thank to Abhishek who made it possible for us. Because of his efforts, all the MVPs had the opportunity to meet such a legendary person and had to talk with them on Microsoft Technology. Though Somasegar is currently holding such a high position in Microsoft, he is very polite and a real gentleman, and how I wish that everybody in industry is like him. Believe me, if you spread love and kindness, then that is what you will receive back. As soon as lunch time was over, I ran to the session hall as my second presentation was about to start. Time: 2:30pm – 3:30pm Session 2: Master Data Services in Microsoft SQL Server 2008 R2 Business Intelligence is a subject which was widely talked about at TechEd. Everybody was interested in this subject, and I did not excuse myself from this great concept as well. I consider myself fortunate as I was presenting on the subject of Master Data Services at TechEd. When I had initially learned this subject, I had a bit of confusion about the usage of this tool. Later on, I decided that I would tackle about how we all developers and DBAs are not able to understand something so simple such as this, and even worst, creating confusion about the technology. During system designing, it is very important to have a reference material or master lookup tables. Well, I talked about the same subject and presented the session keeping that as my center talk. The session went very well and I received lots of interesting questions. I got many compliments for talking about this subject on the real-life scenario. I really thank Rushabh Mehta (CEO, Solid Quality Mentors India) for his supportive suggestions that helped me prepare the slide deck, as well as the subject. Pinal Presenting session at TechEd India 2010 The abstract of the session is as follows: SQL Server Master Data Services will ship with SQL Server 2008 R2 and will improve Microsoft’s platform appeal. This session provides an in-depth demonstration of MDS features and highlights important usage scenarios. Master Data Services enables consistent decision-making process by allowing you to create, manage and propagate changes from a single master view of your business entities. Also, MDS – Master Data-hub which is a vital component, helps ensure the consistency of reporting across systems and deliver faster and more accurate results across the enterprise. We will talk about establishing the basis for a centralized approach to defining, deploying, and managing master data in the enterprise. Pinal Presenting session at TechEd India 2010 The day was still not over for me. I had ran into several friends but we were not able keep our enthusiasm under control about all the rumors saying that SQL Server 2008 R2 was about to be launched tomorrow in the keynote. I then ran to my third and final technical event for the day- a panel discussion with the top technologies of India. Time: 5:00pm – 6:00pm Panel Discussion: Harness the power of Web – SEO and Technical Blogging As I have delivered two technical sessions by this time, I was a bit tired but  not less enthusiastic when I had to talk about Blog and Technology. We discussed many different topics there. I told them that the most important aspect for any blog is its content. We discussed in depth the issues with plagiarism and how to avoid it. Another topic of discussion was how we technology bloggers can create awareness in the Community about what the right kind of blogging is and what morally and technically wrong acts are. A couple of questions were raised about what type of liberty a person can have in terms of writing blogs. Well, it was generically agreed that a blog is mainly a representation of our ideas and thoughts; it should not be governed by external entities. As long as one is writing what they really want to say, but not providing incorrect information or not practicing plagiarism, a blogger should be allowed to express himself. This panel discussion was supposed to be over in an hour, but the interest of the participants was remarkable and so it was extended for 30 minutes more. Finally, we decided to bring to a close the discussion and agreed that we will continue the topic next year. TechEd India Panel Discussion on Web, Technology and SEO Surprisingly, the day was just beginning after doing all of these. By this time, I have almost met all the MVP who arrived at the event, as well as many Microsoft employees. There were lots of Community folks present, too. I decided that I would go to meet several friends from the Community and continue to communicate with me on SQLAuthority.com. I also met Abhishek Baxi and had a good talk with him regarding Win Mobile and Twitter. He also took a very quick video of me wherein I spoke in my mother’s tongue, Gujarati. It was funny that I talked in Gujarati almost all the day, but when I was talking in the interview I could not find the right Gujarati words to speak. I think we all think in English when we think about Technology, so as to address universality. After meeting them, I headed towards the Speakers’ Dinner. Time: 8:00 PM – onwards Speakers Dinner The Speakers’ dinner was indeed a wonderful opportunity for all the speakers to get together and relax. We talked so many different things, from XBOX to Hindi Movies, and from SQL to Samosas. I just could not express how much fun I had. After a long evening, when I returned tmy room and met Shaivi, I just felt instantly relaxed. Kids are really gifts from God. Today was a really long but exciting day. So many things happened in just one day: Visual Studio Lanch, lunch with Somasegar, 2 technical sessions, 1 panel discussion, community leaders meeting, speakers dinner and, last but not leas,t playing with my child! A perfect day! Day 2 – April 13, 2010 Today started with a bang with the excellent keynote by Kamal Hathi who launched SQL Server 2008 R2 in India and demonstrated the power of PowerPivot to all of us. 101 Million Rows in Excel brought lots of applause from the audience. Kamal Hathi Presenting Keynote at TechEd India 2010 The day was a bit easier one for me. I had no sessions today and no events planned. I had a few meetings planned for the second day of the event. I sat in the speaker’s lounge for half a day and met many people there. I attended nearly 9 different meetings today. The subjects of the meetings were very different. Here is a list of the topics of the Community-related meetings: SQL PASS and its involvement in India and subcontinents How to start community blogging Forums and developing aptitude towards technology Ahmedabad/Gandhinagar User Groups and their developments SharePoint and SQL Business Meeting – a client meeting Business Meeting – a potential performance tuning project Business Meeting – Solid Quality Mentors (SolidQ) And family friends Pinal Dave at TechEd India The day passed by so quickly during this meeting. In the evening, I headed to Partners Expo with friends and checked out few of the booths. I really wanted to talk about some of the products, but due to the freebies there was so much crowd that I finally decided to just take the contact details of the partner. I will now start sending them with my queries and, hopefully, I will have my questions answered. Nupur and Shaivi had also one meeting to attend; it was with our family friend Vijay Raj. Vijay is also a person who loves Technology and loves it more than anybody. I see him growing and learning every day, but still remaining as a ‘human’. I believe that if someone acquires as much knowledge as him, that person will become either a computer or cyborg. Here, Vijay is still a kind gentleman and is able to stay as our close family friend. Shaivi was really happy to play with Uncle Vijay. Pinal Dave and Vijay Raj Renuka Prasad, a Microsoft MVP, impressed me with his passion and knowledge of SQL. Every time he gives me credit for his success, I believe that he is very humble. He has way more certifications than me and has worked many more years with SQL compared to me. He is an excellent photographer as well. Most of the photos in this blog post have been taken by him. I told him if ever he wants to do a part time job, he can do the photography very well. Pinal Dave and Renuka Prasad I also met L Srividya from Microsoft, whom I was looking forward to meet. She is a bundle of knowledge that everyone would surely learn a lot from her. I was able to get a few minutes from her and well, I felt confident. She enlightened me with SQL Server BI concepts, domain management and SQL Server security and few other interesting details. I also had a wonderful time talking about SharePoint with fellow Solid Quality Mentor Joy Rathnayake. He is very passionate about SharePoint but when you talk .NET and SQL with him, he is still overwhelmingly knowledgeable. In fact, while talking to him, I figured out that the recent training he delivered was on SQL Server 2008 R2. I told him a joke that it hurts my ego as he is more popular now in SQL training and consulting than me. I am sure all of you agree that working with good people is a gift from God. I am fortunate enough to work with the best of the best Industry experts. It was a great pleasure to hang out with my Community friends – Ahswin Kini, HimaBindu Vejella, Vasudev G, Suprotim Agrawal, Dhananjay, Vikram Pendse, Mahesh Dhola, Mahesh Mitkari,  Manu Zacharia, Shobhan, Hardik Shah, Ashish Mohta, Manan, Subodh Sohani and Sanjay Shetty (of course!) .  (Please let me know if I have met you at the event and forgot your name to list here). Time: 8:00 PM – onwards Community Leaders Dinner After lots of meetings, I headed towards the Community Leaders dinner meeting and met almost all the folks I met in morning. The discussion was almost the same but the real good thing was that we were enjoying it. The food was really good. Nupur was invited in the event, but Shaivi could not come. When Nupur tried to enter the event, she was stopped as Shaivi did not have the pass to enter the dinner. Nupur expressed that Shaivi is only 8 months old and does not eat outside food as well and could not stay by herself at this age, but the door keeper did not agree and asked that without the entry details Shaivi could not go in, but Nupur could. Nupur called me on phone and asked me to help her out. By the time, I was outside; the organizer of the event reached to the door and happily approved Shaivi to join the party. Once in the party, Shaivi had lots of fun meeting so many people. Shaivi Dave and Abhishek Kant Dean Guida (Infragistics President and CEO) and Pinal Dave (SQLAuthority.com) Day 3 – April 14, 2010 Though, it was last day, I was very much excited today as I was about to present my very favorite session. Query Optimization and Performance Tuning is my domain expertise and I make my leaving by consulting and training the same. Today’s session was on the same subject and as an additional twist, another subject about Spatial Database was presented. I was always intrigued with Spatial Database and I have enjoyed learning about it; however, I have never thought about Spatial Indexing before it was decided that I will do this session. I really thank Solid Quality Mentor Dr. Greg Low for his assistance in helping me prepare the slide deck and also review the content. Furthermore, today was really what I call my ‘learning day’ . So far I had not attended any session in TechEd and I felt a bit down for that. Everybody spends their valuable time & money to learn something new and exciting in TechEd and I had not attended a single session at the moment thinking that it was already last day of the event. I did have a plan for the day and I attended two technical sessions before my session of spatial database. I attended 2 sessions of Vinod Kumar. Vinod is a natural storyteller and there was no doubt that his sessions would be jam-packed. People attended his sessions simply because Vinod is syhe speaker. He did not have a single time disappointed audience; he is truly a good speaker. He knows his stuff very well. I personally do not think that in India he can be compared to anyone for SQL. Time: 12:30pm-1:30pm SQL Server Query Optimization, Execution and Debugging Query Performance I really had a fun time attending this session. Vinod made this session very interactive. The entire audience really got into the presentation and started participating in the event. Vinod was presenting a small problem with Query Tuning, which any developer would have encountered and solved with their help in such a fashion that a developer feels he or she have already resolved it. In one question, I was the only one who was ready to answer and Vinod told me in a light tone that I am now allowed to answer it! The audience really found it very amusing. There was a huge crowd around Vinod after the session. Vinod – A master storyteller! Time: 3:45pm-4:45pm Data Recovery / consistency with CheckDB This session was much heavier than the earlier one, and I must say this is my most favorite session I EVER attended in India. In this TechEd I have only attended two sessions, but in my career, I have attended numerous technical sessions not only in India, but all over the world. This session had taken my breath away. One by one, Vinod took the different databases, and started to corrupt them in different ways. Each database has some unique ways to get corrupted. Once that was done, Vinod started to show the DBCC CEHCKDB and demonstrated how it can solve your problem. He finally fixed all the databases with this single tool. I do have a good knowledge of this subject, but let me honestly admit that I have learned a lot from this session. I enjoyed and cheered during this session along with other attendees. I had total satisfaction that, just like everyone, I took advantage of the event and learned something. I am now TECHnically EDucated. Pinal Dave and Vinod Kumar After two very interactive and informative SQL Sessions from Vinod Kumar, the next turn me presenting on Spatial Database and Indexing. I got once again nervous but Vinod told me to stay natural and do my presentation. Well, once I got a huge stage with a total of four projectors and a large crowd, I felt better. Time: 5:00pm-6:00pm Session 3: Developing with SQL Server Spatial and Deep Dive into Spatial Indexing Pinal Presenting session at TechEd India 2010 Pinal Presenting session at TechEd India 2010 I kicked off this session with Michael J Swart‘s beautiful spatial image. This session was the last one for the day but, to my surprise, I had more than 200+ attendees. Slowly, the rain was starting outside and I was worried that the hall would not be full; despite this, there was not a single seat available in the first five minutes of the session. Thanks to all of you for attending my presentation. I had demonstrated the map of world (and India) and quickly explained what  Geographic and Geometry data types in Spatial Database are. This session had interesting story of Indexing and Comparison, as well as how different traditional indexes are from spatial indexing. Pinal Presenting session at TechEd India 2010 Due to the heavy rain during this event, the power went off for about 22 minutes (just an accident – nobodies fault). During these minutes, there were no audio, no video and no light. I continued to address the mass of 200+ people without any audio device and PowerPoint. I must thank the audience because not a single person left from the session. They all stayed in their place, some moved closure to listen to me properly. I noticed that the curiosity and eagerness to learn new things was at the peak even though it was the very last session of the TechEd. Everybody wanted get the maximum knowledge out of this whole event. I was touched by the support from audience. They listened and participated in my session even without any kinds of technology (no ppt, no mike, no AC, nothing). During these 22 minutes, I had completed my theory verbally. Pinal Presenting session at TechEd India 2010 After a while, we got the projector back online and we continued with some exciting demos. Many thanks to Microsoft people who worked energetically in background to get the backup power for project up. I had a very interesting demo wherein I overlaid Bangalore and Hyderabad on the India Map and find their aerial distance between them. After finding the aerial distance, we browsed online and found that SQL Server estimates the exact aerial distance between these two cities, as compared to the factual distance. There was a huge applause from the crowd on the subject that SQL Server takes into the count of the curvature of the earth and finds the precise distances based on details. During the process of finding the distance, I demonstrated a few examples of the indexes where I expressed how one can use those indexes to find these distances and how they can improve the performance of similar query. I also demonstrated few examples wherein we were able to see in which data type the Index is most useful. We finished the demos with a few more internal stuff. Pinal Presenting session at TechEd India 2010 Despite all issues, I was mostly satisfied with my presentation. I think it was the best session I have ever presented at any conference. There was no help from Technology for a while, but I still got lots of appreciation at the end. When we ended the session, the applause from the audience was so loud that for a moment, the rain was not audible. I was truly moved by the dedication of the Technology enthusiasts. Pinal Dave After Presenting session at TechEd India 2010 The abstract of the session is as follows: The Microsoft SQL Server 2008 delivers new spatial data types that enable you to consume, use, and extend location-based data through spatial-enabled applications. Attend this session to learn how to use spatial functionality in next version of SQL Server to build and optimize spatial queries. This session outlines the new geography data type to store geodetic spatial data and perform operations on it, use the new geometry data type to store planar spatial data and perform operations on it, take advantage of new spatial indexes for high performance queries, use the new spatial results tab to quickly and easily view spatial query results directly from within Management Studio, extend spatial data capabilities by building or integrating location-enabled applications through support for spatial standards and specifications and much more. Time: 8:00 PM – onwards Dinner by Sponsors After the lively session during the day, there was another dinner party courtesy of one of the sponsors of TechEd. All the MVPs and several Community leaders were present at the dinner. I would like to express my gratitude to Abhishek Kant for organizing this wonderful event for us. It was a blast and really relaxing in all angles. We all stayed there for a long time and talked about our sweet and unforgettable memories of the event. Pinal Dave and Bijoy Singhal It was really one wonderful event. After writing this much, I say that I have no words to express about how much I enjoyed TechEd. However, it is true that I shared with you only 1% of the total activities I have done at the event. There were so many people I have met, yet were not mentioned here although I wanted to write their names here, too . Anyway, I have learned so many things and up until now, I am not able to get over all the fun I had in this event. Pinal Dave at TechEd India 2010 The Next Days – April 15, 2010 – till today I am still not able to get my mind out of the whole experience I had at TechEd India 2010. It was like a whole Microsoft Family working together to celebrate a happy occasion. TechEd India – Truly An Unforgettable Experience! Reference : Pinal Dave (http://blog.SQLAuthority.com) Filed under: About Me, MVP, Pinal Dave, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, SQLAuthority News, SQLServer, T SQL, Technology Tagged: TechEd, TechEdIn

    Read the article

  • Recursion in Ecore-File?!

    - by Dominik
    Hey guys, just tried to convert towards a Ecore-Model from a given UML-Model. After this I am trying to create a Generator Model. Everytime I try to do this I get the Error Message, that there is a "Unhandled event loop exception" with this log: org.eclipse.swt.SWTException: Failed to execute runnable (java.lang.NullPointerException) at org.eclipse.swt.SWT.error(SWT.java:3884) at org.eclipse.swt.SWT.error(SWT.java:3799) at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:137) at org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:3885) at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3506) at org.eclipse.jface.window.Window.runEventLoop(Window.java:825) at org.eclipse.jface.window.Window.open(Window.java:801) at org.eclipse.gmf.internal.bridge.ui.dashboard.DashboardMediator$RunWizardAction.run(DashboardMediator.java:316) at org.eclipse.gmf.internal.bridge.ui.dashboard.HyperlinkFigure$1.mousePressed(HyperlinkFigure.java:63) at org.eclipse.draw2d.Figure.handleMousePressed(Figure.java:873) at org.eclipse.draw2d.SWTEventDispatcher.dispatchMousePressed(SWTEventDispatcher.java:214) at org.eclipse.draw2d.LightweightSystem$EventHandler.mouseDown(LightweightSystem.java:513) at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:179) at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84) at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1003) at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3910) at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3503) at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2405) at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2369) at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2221) at org.eclipse.ui.internal.Workbench$5.run(Workbench.java:500) at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332) at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:493) at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149) at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:113) at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:194) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:368) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source) at java.lang.reflect.Method.invoke(Unknown Source) at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:559) at org.eclipse.equinox.launcher.Main.basicRun(Main.java:514) at org.eclipse.equinox.launcher.Main.run(Main.java:1311) Caused by: java.lang.NullPointerException at org.eclipse.emf.converter.util.ConverterUtil.computeRequiredPackages(ConverterUtil.java:374) at org.eclipse.emf.converter.ui.contribution.base.ModelConverterPackagePage.validate(ModelConverterPackagePage.java:965) at org.eclipse.emf.importer.ui.contribution.base.ModelImporterPackagePage.validate(ModelImporterPackagePage.java:101) at org.eclipse.emf.converter.ui.contribution.base.ModelConverterPackagePage$1.run(ModelConverterPackagePage.java:155) at org.eclipse.swt.widgets.RunnableLock.run(RunnableLock.java:35) at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:134) ... 34 more After this there occurs another exception with this text: "Unable to create editor ID org.eclipse.emf.codegen.ecore.genmodel.presentation.GenModelEditorID:An unexpected exception was thrown." The session data says: eclipse.buildId=unknown java.version=1.6.0_13 java.vendor=Sun Microsystems Inc. BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=de_DE Framework arguments: -product org.eclipse.epp.package.modeling.product Command-line arguments: -os win32 -ws win32 -arch x86 -product org.eclipse.epp.package.modeling.product -consoleLog With this long log: java.lang.NullPointerException at org.eclipse.emf.ecore.util.EcoreUtil.getURI(EcoreUtil.java:2887) at org.eclipse.emf.codegen.ecore.genmodel.impl.GenModelImpl.diagnose(GenModelImpl.java:2930) at org.eclipse.emf.codegen.ecore.genmodel.presentation.GenModelEditor.validate(GenModelEditor.java:1773) at org.eclipse.emf.codegen.ecore.genmodel.presentation.GenModelEditor.initialize(GenModelEditor.java:596) at org.eclipse.emf.codegen.ecore.genmodel.presentation.GenModelEditor.createPages(GenModelEditor.java:1080) at org.eclipse.ui.part.MultiPageEditorPart.createPartControl(MultiPageEditorPart.java:357) at org.eclipse.ui.internal.EditorReference.createPartHelper(EditorReference.java:662) at org.eclipse.ui.internal.EditorReference.createPart(EditorReference.java:462) at org.eclipse.ui.internal.WorkbenchPartReference.getPart(WorkbenchPartReference.java:595) at org.eclipse.ui.internal.EditorReference.getEditor(EditorReference.java:286) at org.eclipse.ui.internal.WorkbenchPage.busyOpenEditorBatched(WorkbenchPage.java:2857) at org.eclipse.ui.internal.WorkbenchPage.busyOpenEditor(WorkbenchPage.java:2762) at org.eclipse.ui.internal.WorkbenchPage.access$11(WorkbenchPage.java:2754) at org.eclipse.ui.internal.WorkbenchPage$10.run(WorkbenchPage.java:2705) at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:70) at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2701) at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2685) at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2668) at org.eclipse.emf.converter.ui.contribution.base.ModelConverterWizard.openEditor(ModelConverterWizard.java:318) at org.eclipse.emf.importer.ui.contribution.base.ModelImporterWizard.performFinish(ModelImporterWizard.java:167) at org.eclipse.jface.wizard.WizardDialog.finishPressed(WizardDialog.java:752) at org.eclipse.gmf.internal.bridge.ui.dashboard.DashboardMediator$RunWizardAction$1.finishPressed(DashboardMediator.java:311) at org.eclipse.jface.wizard.WizardDialog.buttonPressed(WizardDialog.java:373) at org.eclipse.jface.dialogs.Dialog$2.widgetSelected(Dialog.java:624) at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:228) at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84) at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1003) at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3910) at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3503) at org.eclipse.jface.window.Window.runEventLoop(Window.java:825) at org.eclipse.jface.window.Window.open(Window.java:801) at org.eclipse.gmf.internal.bridge.ui.dashboard.DashboardMediator$RunWizardAction.run(DashboardMediator.java:316) at org.eclipse.gmf.internal.bridge.ui.dashboard.HyperlinkFigure$1.mousePressed(HyperlinkFigure.java:63) at org.eclipse.draw2d.Figure.handleMousePressed(Figure.java:873) at org.eclipse.draw2d.SWTEventDispatcher.dispatchMousePressed(SWTEventDispatcher.java:214) at org.eclipse.draw2d.LightweightSystem$EventHandler.mouseDown(LightweightSystem.java:513) at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:179) at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84) at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1003) at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3910) at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3503) at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2405) at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2369) at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2221) at org.eclipse.ui.internal.Workbench$5.run(Workbench.java:500) at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332) at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:493) at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149) at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:113) at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:194) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:368) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source) at java.lang.reflect.Method.invoke(Unknown Source) at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:559) at org.eclipse.equinox.launcher.Main.basicRun(Main.java:514) at org.eclipse.equinox.launcher.Main.run(Main.java:1311) Has anyone an idea what is going wrong? I looked a while at my model but were not able to find something wrong. I just thought there might be a recursion due to the "Unhandled event loop exception" but is this even possible? Thanks in advance, Dominik

    Read the article

< Previous Page | 378 379 380 381 382 383 384 385 386 387 388 389  | Next Page >