Search Results

Search found 11608 results on 465 pages for 'usb extension'.

Page 383/465 | < Previous Page | 379 380 381 382 383 384 385 386 387 388 389 390  | Next Page >

  • Installed Ubuntu 14.04LTS

    - by user291729
    On my laptop which came pre-installed with Windows 8.1. Felt I needed to see the competition for myself to establish which was a better OS. So I followed the channels to dual boot. All seemed fine and I accessed Ubuntu with no issues after selecting this from the menu to select the OS. I should add that the boot method was changed to legacy. However, since using Ubuntu, I no longer have the ability to select the OS. The laptop simply logs straight into Ubuntu. I therefore attempted to access the recovery options, only it appears the Windows 8 bootloader has somehow been corrupted as I am now told to use the Windows 8 recovery disc (which, as this was pre-installed - I do not have). Left with no other alternative, I have scoured these forums without success, and so I am hoping someone in the know (or who has experienced similar) can help. I have tried boot repair again without success. On rebooting I am only presented with a basic splash screen asking me to select Ubuntu, Memtest, Windows 8 Recovery or Windows 8 Bootloader (The bootloaders again require I insert the disc). I have tried Code: cat /boot/grub/grub.cfg df -h sudo fdisk -l cat /proc/partitions # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi if [ "${next_entry}" ] ; then set default="${next_entry}" set next_entry= save_env next_entry set boot_once=true else set default="0" fi if [ x"${feature_menuentry_id}" = xy ]; then menuentry_id_option="--id" else menuentry_id_option="" fi export menuentry_id_option if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { if [ x$feature_all_video_module = xy ]; then insmod all_video else insmod efi_gop insmod efi_uga insmod ieee1275_fb insmod vbe insmod vga insmod video_bochs insmod video_cirrus fi } if [ x$feature_default_font_path = xy ] ; then font=unicode else insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi font="/usr/share/grub/unicode.pf2" fi if loadfont $font ; then set gfxmode=800x600 load_video insmod gfxterm set locale_dir=$prefix/locale set lang=en_GB insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ] ; then set timeout=-1 else if [ x$feature_timeout_style = xy ] ; then set timeout_style=menu set timeout=20 # Fallback normal timeout code in case the timeout_style feature is # unavailable. else set timeout=20 fi fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff initrd /boot/initrd.img-3.13.0-29-generic } submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { menuentry 'Ubuntu, with Linux 3.13.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-29-generic-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-29-generic ...' linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-29-generic } menuentry 'Ubuntu, with Linux 3.13.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-29-generic-recovery-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-29-generic ...' linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro recovery nomodeset vga=789 quiet echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-29-generic } menuentry 'Ubuntu, with Linux 3.13.0-24-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-24-generic ...' linux /boot/vmlinuz-3.13.0-24-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-24-generic } menuentry 'Ubuntu, with Linux 3.13.0-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-recovery-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-24-generic ...' linux /boot/vmlinuz-3.13.0-24-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro recovery nomodeset vga=789 quiet echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-24-generic } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry 'Memory test (memtest86+)' { insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi knetbsd /boot/memtest86+.elf } menuentry 'Memory test (memtest86+, serial console 115200)' { insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry 'Windows Recovery Environment (loader) (on /dev/sda2)' --class windows --class os $menuentry_id_option 'osprober-chain-7A6A69D66A698FA5' { insmod part_gpt insmod ntfs set root='hd0,gpt2' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 7A6A69D66A698FA5 else search --no-floppy --fs-uuid --set=root 7A6A69D66A698FA5 fi drivemap -s (hd0) ${root} chainloader +1 } menuentry 'Windows 8 (loader) (on /dev/sda3)' --class windows --class os $menuentry_id_option 'osprober-chain-8C88-80F7' { insmod part_gpt insmod fat set root='hd0,gpt3' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3 8C88-80F7 else search --no-floppy --fs-uuid --set=root 8C88-80F7 fi drivemap -s (hd0) ${root} chainloader +1 } set timeout_style=menu if [ "${timeout}" = 0 ]; then set timeout=10 fi ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/30_uefi-firmware ### ### END /etc/grub.d/30_uefi-firmware ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f ${config_directory}/custom.cfg ]; then source ${config_directory}/custom.cfg elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi if [ "${next_entry}" ] ; then set default="${next_entry}" set next_entry= save_env next_entry set boot_once=true else set default="0" fi if [ x"${feature_menuentry_id}" = xy ]; then menuentry_id_option="--id" else menuentry_id_option="" fi export menuentry_id_option if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { if [ x$feature_all_video_module = xy ]; then insmod all_video else insmod efi_gop insmod efi_uga insmod ieee1275_fb insmod vbe insmod vga insmod video_bochs insmod video_cirrus fi } if [ x$feature_default_font_path = xy ] ; then font=unicode else insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi font="/usr/share/grub/unicode.pf2" fi if loadfont $font ; then set gfxmode=800x600 load_video insmod gfxterm set locale_dir=$prefix/locale set lang=en_GB insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ] ; then set timeout=-1 else if [ x$feature_timeout_style = xy ] ; then set timeout_style=menu set timeout=20 # Fallback normal timeout code in case the timeout_style feature is # unavailable. else set timeout=20 fi fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff initrd /boot/initrd.img-3.13.0-29-generic } submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { menuentry 'Ubuntu, with Linux 3.13.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-29-generic-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-29-generic ...' linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-29-generic } menuentry 'Ubuntu, with Linux 3.13.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-29-generic-recovery-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-29-generic ...' linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro recovery nomodeset vga=789 quiet echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-29-generic } menuentry 'Ubuntu, with Linux 3.13.0-24-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-24-generic ...' linux /boot/vmlinuz-3.13.0-24-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-24-generic } menuentry 'Ubuntu, with Linux 3.13.0-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-recovery-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-24-generic ...' linux /boot/vmlinuz-3.13.0-24-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro recovery nomodeset vga=789 quiet echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-24-generic } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry 'Memory test (memtest86+)' { insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi knetbsd /boot/memtest86+.elf } menuentry 'Memory test (memtest86+, serial console 115200)' { insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry 'Windows Recovery Environment (loader) (on /dev/sda2)' --class windows --class os $menuentry_id_option 'osprober-chain-7A6A69D66A698FA5' { insmod part_gpt insmod ntfs set root='hd0,gpt2' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 7A6A69D66A698FA5 else search --no-floppy --fs-uuid --set=root 7A6A69D66A698FA5 fi drivemap -s (hd0) ${root} chainloader +1 } menuentry 'Windows 8 (loader) (on /dev/sda3)' --class windows --class os $menuentry_id_option 'osprober-chain-8C88-80F7' { insmod part_gpt insmod fat set root='hd0,gpt3' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3 8C88-80F7 else search --no-floppy --fs-uuid --set=root 8C88-80F7 fi drivemap -s (hd0) ${root} chainloader +1 } set timeout_style=menu if [ "${timeout}" = 0 ]; then set timeout=10 fi ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/30_uefi-firmware ### ### END /etc/grub.d/30_uefi-firmware ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f ${config_directory}/custom.cfg ]; then source ${config_directory}/custom.cfg elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### john@john-SVE1713Y1EB:~$ ^C john@john-SVE1713Y1EB:~$ ^C john@john-SVE1713Y1EB:~$ df -h Filesystem Size Used Avail Use% Mounted on /dev/sda9 84G 7.1G 73G 9% / none 4.0K 0 4.0K 0% /sys/fs/cgroup udev 3.9G 4.0K 3.9G 1% /dev tmpfs 794M 1.4M 793M 1% /run none 5.0M 0 5.0M 0% /run/lock none 3.9G 80K 3.9G 1% /run/shm none 100M 52K 100M 1% /run/user /dev/sdc1 7.5G 2.2G 5.4G 29% /media/john/DYLANMUSIC /dev/sr0 964M 964M 0 100% /media/john/Ubuntu 14.04 LTS amd64 /dev/sdb1 1.9T 892G 972G 48% /media/john/Storage Main WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x4e2ccf75 Device Boot Start End Blocks Id System /dev/sda1 1 1953525167 976762583+ ee GPT Partition 1 does not start on physical sector boundary. Disk /dev/sdc: 8011 MB, 8011120640 bytes 41 heads, 41 sectors/track, 9307 cylinders, total 15646720 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc3072e18 Device Boot Start End Blocks Id System /dev/sdc1 8064 15646719 7819328 b W95 FAT32 Disk /dev/sdb: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc7d968ff Device Boot Start End Blocks Id System /dev/sdb1 64 3907029119 1953514528 7 HPFS/NTFS/exFAT major minor #blocks name 8 0 976762584 sda 8 1 266240 sda1 8 2 1509376 sda2 8 3 266240 sda3 8 4 131072 sda4 8 5 841012780 sda5 8 6 358400 sda6 8 7 35376128 sda7 8 8 1024 sda8 8 9 89501696 sda9 8 10 8337408 sda10 11 0 987136 sr0 8 32 7823360 sdc 8 33 7819328 sdc1 8 16 1953514584 sdb 8 17 1953514528 sdb1 I am no expert on this and I'm at a loss as how to correct this without having to re-format everything and reinstall Windows 8. However, if I'm to try using Ubuntu again then there is the risk this problem may come back. Again, I did not do anything manually - the installer did everything (with the exception of changing the boot to Legacy to allow the booting of another bootloader). LiveCD works but doesn't give me the options that I've seen here and as mentioned earlier, only boot recovery only gives me the options as mentioned earlier. Also this fails to load via USB (possibly because HDD comes before USB in the boot order?). Being used to a Windows environment, the Ubuntu (and Linux) environment is a dive at a less than comfortable depth at present (but one I fully intend to get to grips with - especially the commands being more common via Terminal). I very much appreciate the help with this guys.

    Read the article

  • Unity desktop "smears" (doesn't refresh) and shows no wallpaper

    - by Cedric Reichenbach
    Since a couple of days now, my unity desktop background smears everything, just like what old Windows versions were famous for: Of course, I tried rebooting a couple of times. Also, I switched graphics driver and I tried to change wallpaper and theme, but none of them solved the problem. What could be causing that problem, and where can I search on for its source? Infomation update I'm using Ubuntu 13.04 (not updated to 13.10 yet). The following command were all run from cinnamon (on the same Ubuntu installation). sudo lsb_release -a: No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 13.04 Release: 13.04 Codename: raring sudo uname -a: Linux cedric-MacBookPro 3.8.0-32-generic #47-Ubuntu SMP Tue Oct 1 22:35:23 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux sudo dpkg -l | grep xserver-xorg-video: ii xserver-xorg-video-all 1:7.7+1ubuntu4 amd64 X.Org X server -- output driver metapackage ii xserver-xorg-video-ati 1:7.1.0-0ubuntu2 amd64 X.Org X server -- AMD/ATI display driver wrapper ii xserver-xorg-video-cirrus 1:1.5.2-0ubuntu1 amd64 X.Org X server -- Cirrus display driver ii xserver-xorg-video-fbdev 1:0.4.3-0ubuntu1 amd64 X.Org X server -- fbdev display driver ii xserver-xorg-video-intel 2:2.21.6-0ubuntu4.3 amd64 X.Org X server -- Intel i8xx, i9xx display driver ii xserver-xorg-video-mach64 6.9.3-0ubuntu1 amd64 X.Org X server -- ATI Mach64 display driver ii xserver-xorg-video-mga 1:1.6.2-0ubuntu1 amd64 X.Org X server -- MGA display driver ii xserver-xorg-video-modesetting 0.7.0-0ubuntu2 amd64 X.Org X server -- Generic modesetting driver ii xserver-xorg-video-neomagic 1:1.2.7-0ubuntu1 amd64 X.Org X server -- Neomagic display driver ii xserver-xorg-video-nouveau 1:1.0.7-0ubuntu1 amd64 X.Org X server -- Nouveau display driver ii xserver-xorg-video-openchrome 1:0.3.1-0ubuntu1.13.04.1 amd64 X.Org X server -- VIA display driver ii xserver-xorg-video-qxl 0.1.0-0ubuntu3 amd64 X.Org X server -- QXL display driver ii xserver-xorg-video-r128 6.9.1-0ubuntu1 amd64 X.Org X server -- ATI r128 display driver ii xserver-xorg-video-radeon 1:7.1.0-0ubuntu2 amd64 X.Org X server -- AMD/ATI Radeon display driver ii xserver-xorg-video-s3 1:0.6.5-0ubuntu3 amd64 X.Org X server -- legacy S3 display driver ii xserver-xorg-video-savage 1:2.3.6-0ubuntu1 amd64 X.Org X server -- Savage display driver ii xserver-xorg-video-siliconmotion 1:1.7.7-0ubuntu1 amd64 X.Org X server -- SiliconMotion display driver ii xserver-xorg-video-sis 1:0.10.7-0ubuntu1 amd64 X.Org X server -- SiS display driver ii xserver-xorg-video-sisusb 1:0.9.6-0ubuntu1 amd64 X.Org X server -- SiS USB display driver ii xserver-xorg-video-tdfx 1:1.4.5-0ubuntu1 amd64 X.Org X server -- tdfx display driver ii xserver-xorg-video-trident 1:1.3.6-0ubuntu2 amd64 X.Org X server -- Trident display driver ii xserver-xorg-video-vesa 1:2.3.2-0ubuntu1 amd64 X.Org X server -- VESA display driver ii xserver-xorg-video-vmware 1:12.0.2+git.e5ac80d8-0ubuntu1 amd64 X.Org X server -- VMware display driver sudo lspci | grep VGA: 01:00.0 VGA compatible controller: NVIDIA Corporation GT216M [GeForce GT 330M] (rev a2)

    Read the article

  • Documentation in Oracle Retail Merchandising System (RMS) and Oracle Retail Fiscal Management System (ORFM), Release 13.2.4

    - by Oracle Retail Documentation Team
    The Patch Release 13.2.4 of the Oracle Retail Merchandising System (RMS) and its module, Oracle Retail Fiscal Management (ORFM)  is now available from My Oracle Support. End User Documentation Enhancements The following summarize the highlights of changes made to the documentation in conjunction with the new Brazil-related functionality: Foundation chapter in the Oracle Retail Merchandising System (RMS)/Sales Audit (ReSA) Brazil Localization User GuideThis chapter was updated with a non-base Localization Flexible Attribution Solution (LFAS) section that addresses the addition of several new custom attributes to Items and Suppliers through non-base LFAS for Brazil; it also addresses the extension of the Retail Tax Integration Layer (RTIL) through the Oracle Retail Merchandising System (RMS), and Oracle Retail Fiscal Management System (ORFM).  ORFM User GuideThe Purchase Order chapter was updated to include schedule related updates for a Nota Fiscal. The Fiscal Documents chapter was updated to include information on creating a new NF and searching for details using Vendor Product Number. Oracle Retail Fiscal Management/RMS Brazil Localization Implementation GuideThe Implementation Checklist chapter was updated with a note on multi-currency functionality. The Batch Processes chapter was updated with information on the NF EDI batch. The following summarize the highlights of changes made to the documentation in conjunction with the new technical certifications (see the RMS 13.2.4 Release Notes for more information): Installation Guides for RMS and for ORFM/RMS BrazilThese installation guides were updated extensively to account for the multiple technical certification enhancements in 13.2.4. White Paper: How to Upgrade from WebLogic11g 10.3.3 to WebLogic11g 10.3.4  (Doc ID: 1432575.1)See the previous blog entry regarding this new White Paper. New Documents on My Oracle Support for Brazil Localization Overview and Interfaces Tax Vendor Integration (Doc ID: 1424048.1)Oracle chooses to integrate with a third party tax expert to delivery the Brazilian solution. Oracle has built the Retail Tax Integration layer (RTIL) as the key integration component to support the integration of Oracle suite of products with external tax vendors. This paper addresses the RTIL integration interfaces with TaxWeb, providing guidance on the typical integration interfaces and operations that must be supported by other tax solutions in the Brazilian market. Oracle Retail Fiscal Management/RMS Brazil Localization: Localization Flexible Attribute Solution (LFAS) (Doc ID: 1418509.1)The white paper covers the definition of custom attributes in Localization Flexible Attribute Solution (LFAS) and enables retailers to perform data conversion changes. Retailers can add several new custom attributes to Items and Suppliers through non-base LFAS for Brazil and extend Retail Tax Integration Layer (RTIL) through the Oracle Retail Merchandising System (RMS), and Oracle Retail Fiscal Management System (RFM). Documents Published in RMS and ORFM Release 13.2.4 Oracle Retail Merchandising System Release Notes Oracle Retail Merchandising System Installation Guide Oracle Retail Merchandising System User Guide and Online Help Oracle Retail Sales Audit (ReSA) User Guide and Online Help Oracle Retail Merchandising System Operations Guide Oracle Retail Merchandising System Data Model Oracle Retail Merchandising Batch Schedule Oracle Retail Merchandising Implementation Guide Oracle Retail POS Suite 13.4.1 / Merchandising Operations Management13.2.4 Implementation Guide Oracle Retail Fiscal Management Data Model Oracle Retail Fiscal Management/RMS Brazil Localization Installation Guide Oracle Retail Fiscal Management/RMS Brazil Localization Implementation Guide Oracle Retail Fiscal Management User Guide and Online Help

    Read the article

  • Automated build platform for .NET portfolio - best choice?

    - by jkohlhepp
    I am involved with maintaining a fairly large portfolio of .NET applications. Also in the portfolio are legacy applications built on top of other platforms - native C++, ECLIPS Forms, etc. I have a complex build framework on top of NAnt right now that manages the builds for all of these applications. The build framework uses NAnt to do a number of different things: Pull code out of Subversion, as well as create tags in Subversion Build the code, using MSBuild for .NET or other compilers for other platforms Peek inside AssemblyInfo files to increment version numbers Do deletes of certain files that shouldn't be included in builds / releases Releases code to deployment folders Zips code up for backup purposes Deploy Windows services; start and stop them Etc. Most of those things can be done with just NAnt by itself, but we did build a couple of extension tasks for NAnt to do some things that were specific to our environment. Also, most of those processes above are genericized and reused across a lot of our different application build scripts, so that we don't repeat logic. So it is not simple NAnt code, and not simple build scripts. There are dozens of NAnt files that come together to execute a build. Lately I've been dissatisfied with NAnt for a couple reasons: (1) it's syntax is just awful - programming languages on top of XML are really horrific to maintain, (2) the project seems to have died on the vine; there haven't been a ton of updates lately and it seems like no one is really at the helm. Trying to get it working with .NET 4 has cause some pain points due to this lack of activity. So, with all of that background out of the way, here's my question. Given some of the things that I want to accomplish based on that list above, and given that I am primarily in a .NET shop, but I also need to build non-.NET projects, is there an alternative to NAnt that I should consider switching to? Things on my radar include Powershell (with or without psake), MSBuild by itself, and rake. These all have pros and cons. For example, is MSBuild powerful enough? I remember using it years ago and it didn't seem to have as much power as NAnt. Do I really want to have my team learn Ruby just to do builds using rake? Is psake really mature enough of a project to pin my portfolio to? Is Powershell "too close to the metal" and I'll end up having to write my own build library akin to psake to use it on its own? Are there other tools that I should consider? If you were involved with maintaining a .NET portfolio of significant complexity, what build tool would you be looking at? What does your team currently use?

    Read the article

  • Desktop Fun: Google Themed Icon Packs

    - by Asian Angel
    Are you an avid user of Google’s online services, but the icons for your desktop and app launcher shortcuts leave something to be desired? Now you can make those shortcuts shine with style using our Google Themed Icon Packs collection. Note: To customize the icon setup on your Windows 7 & Vista systems see our article here. Using Windows XP? We have you covered here. Sneak Preview For this week’s sneak preview we set up a Google Chrome themed desktop using the Simply Google Icon Collection shown below. Note: Original full-size wallpaper can be found here. We used Chromium to create a set of app shortcuts for various Google services on our desktop. Anyone who has done the same knows that the original icons do not look very good, so these icon packs can make those shortcuts look spectacular. Once the new icons were arranged for our desktop app shortcuts, we then pinned them to our Taskbar. Those are definitely looking nice! The Icon Packs Simply Google Icon Collection *.ico and .png format Download Google icons *.ico and .png format Download Tango Google Icon Set Vol. 1 *.png and .svg format Download Google Tango Icon Set Vol. 2 *.png and .svg format Download New Google Product Icons *.ico, .png, and .gif format Note: This icon pack contains 657 icons of various sizes. The best selection of individual icon types in the same size (i.e. 48, 128, etc.) from this pack is a mixture of .png and .gif formats. Download New google docs icons *.png format only Download Google Docs pack Icons *.ico, .png, and .gif format Download GCal *.png format only (original favicon .ico file included) Download Google Earth Icon Color Pack *.png format only Download Google Earth Dock Icons *.ico, .png, and .icns format Download Gtalk Color Icons *.png format only Download Google Buzz Icons *.png format only Download Google Chrome icon pack *.png format only Download Google Chrome X *.ico, .png, and .icns format Download Google Chrome icon pack *.png format only Download Wanting more great icon sets to look through? Be certain to visit our Desktop Fun section for more icon goodness! Latest Features How-To Geek ETC How To Boot 10 Different Live CDs From 1 USB Flash Drive The 20 Best How-To Geek Linux Articles of 2010 The 50 Best How-To Geek Windows Articles of 2010 The 20 Best How-To Geek Explainer Topics for 2010 How to Disable Caps Lock Key in Windows 7 or Vista How to Use the Avira Rescue CD to Clean Your Infected PC Enjoy Old School Style Video Game Fun with Chicken Invaders Hide the Twitter “Litter” in Twitter’s Sidebar Area (Chrome and Iron) Public Domain Day: Reflections on Copyright and the Importance of Public Domain Angry Birds Coming to PS3 and PSP This Week I Hate Mondays Wallpaper for That First Day Back at Work Tune Pop Enhances Android Music Notifications

    Read the article

  • A Slice of Raspberry Pi

    - by Phil Factor
    Guest editorial for the ITPro/SysAdmin newsletter The Raspberry Pi Foundation has done a superb design job on their new $35 network-enabled Linux computer. This tiny machine, incorporating an ARM processor on a Broadcom BCM2835 multimedia chip, aims to put the fun back into learning computing. The public response has been overwhelmingly positive.Note that aim: "…to put the fun back". Education in Information Technology is in dire straits. It always has been, but seems to have deteriorated further still, even in the face of improved provision of equipment.In many countries, the government controls the curriculum. It predicted a shortage in office-based IT skills, and so geared the ICT curriculum toward mind-numbing training in word-processing and spreadsheet skills. Instead, the shortage has turned out to be in people with an engineering-mindset, who can solve problems with whatever technologies are available and learn new techniques quickly, in a rapidly-changing field.In retrospect, the assumption that specific training was required rather than an education was an idiotic response to the arrival of mainstream information technology. As a result, ICT became a disaster area, which discouraged a generation of youngsters from a career in IT, and thereby led directly to the shortage of people with the skills that are required to exploit the potential of Information Technology..Raspberry Pi aims to reverse the trend. This is a rig that is geared to fast graphics in high resolution. It is no toy. It should be a superb games machine. However, the use of Fedora, Debian, or Arch Linux ARM shows the more serious educational intent behind the Foundation's work. It looks like it will even do some office work too!So, get hold of any power supply that provides a 5VDC source at the required 700mA; an old Blackberry charger will do or, alternatively, it will run off four AA cells. You'll need a USB hub to support the mouse and keyboard, and maybe a hard drive. You'll want a DVI monitor (with audio out) or TV (sound and video). You'll also need to be able to cope with wired Ethernet 10/100, if you want networking.With this lot assembled, stick the paraphernalia on the back of the HDTV with Blu Tack, get a nice keyboard, and you have a classy Linux-based home computer. The major cost is in the T.V and the keyboard. If you're not already writing software for this platform, then maybe, at a time when some countries are talking of orders in the millions, you should consider it.

    Read the article

  • How to Quickly Add Multiple IP Addresses to Windows Servers

    - by Sysadmin Geek
    If you have ever added multiple IP addresses to a single Windows server, going through the graphical interface is an incredible pain as each IP must be added manually, each in a new dialog box. Here’s a simple solution. Needless to say, this can be incredibly monotonous and time consuming if you are adding more than a few IP addresses. Thankfully, there is a much easier way which allows you to add an entire subnet (or more) in seconds. Adding an IP Address from the Command Line Windows includes the “netsh” command which allows you to configure just about any aspect of your network connections. If you view the accepted parameters using “netsh /?” you will be presented with a list of commands each which have their own list of commands (and so on). For the purpose of adding IP addresses, we are interested in this string of parameters: netsh interface ipv4 add address Note: For Windows Server 2003/XP and earlier, “ipv4″ should be replaced with just “ip” in the netsh command. If you view the help information, you can see the full list of accepted parameters but for the most part what you will be interested in is something like this: netsh interface ipv4 add address “Local Area Connection” 192.168.1.2 255.255.255.0 The above command adds the IP Address 192.168.1.2 (with Subnet Mask 255.255.255.0) to the connection titled “Local Area Network”. Adding Multiple IP Addresses at Once When we accompany a netsh command with the FOR /L loop, we can quickly add multiple IP addresses. The syntax for the FOR /L loop looks like this: FOR /L %variable IN (start,step,end) DO command So we could easily add every IP address from an entire subnet using this command: FOR /L %A IN (0,1,255) DO netsh interface ipv4 add address “Local Area Connection” 192.168.1.%A 255.255.255.0 This command takes about 20 seconds to run, where adding the same number of IP addresses manually would take significantly longer. A Quick Demonstration Here is the initial configuration on our network adapter: ipconfig /all Now run netsh from within a FOR /L loop to add IP’s 192.168.1.10-20 to this adapter: FOR /L %A IN (10,1,20) DO netsh interface ipv4 add address “Local Area Connection” 192.168.1.%A 255.255.255.0 After the above command is run, viewing the IP Configuration of the adapter now shows: Latest Features How-To Geek ETC How To Create Your Own Custom ASCII Art from Any Image How To Process Camera Raw Without Paying for Adobe Photoshop How Do You Block Annoying Text Message (SMS) Spam? How to Use and Master the Notoriously Difficult Pen Tool in Photoshop HTG Explains: What Are the Differences Between All Those Audio Formats? How To Use Layer Masks and Vector Masks to Remove Complex Backgrounds in Photoshop Bring Summer Back to Your Desktop with the LandscapeTheme for Chrome and Iron The Prospector – Home Dash Extension Creates a Whole New Browsing Experience in Firefox KinEmote Links Kinect to Windows Why Nobody Reads Web Site Privacy Policies [Infographic] Asian Temple in the Snow Wallpaper 10 Weird Gaming Records from the Guinness Book

    Read the article

  • Extending the ADF Controller exception handler

    - by frank.nimphius
    The Oracle ADF controller provides a declarative option for developers to define a view activity, method activity or router activity to handle exceptions in bounded or unbounded task flows. Exception handling however is for exceptions only and not handling all types of Throwable. Furthermore, exceptions that occur during the JSF RENDER RESPONSE phase are not looked at either as it is considered too late in the cycle. For developers to try themselves to handle unhandled exceptions in ADF Controller, it is possible to extend the default exception handling, while still leveraging the declarative configuration. To add your own exception handler: · Create a Java class that extends ExceptionHandler · Create a textfile with the name “oracle.adf.view.rich.context.Exceptionhandler” (without the quotes) and store it in .adf\META-INF\services (you need to create the “services” folder) · In the file, add the absolute name of your custom exception handler class (package name and class name without the “.class” extension) For any exception you don't handle in your custom exception handler, just re-throw it for the default handler to give it a try … import oracle.adf.view.rich.context.ExceptionHandler; public class MyCustomExceptionHandler extends ExceptionHandler { public MyCustomExceptionHandler() {      super(); } public void handleException(FacesContext facesContext,                              Throwable throwable, PhaseId phaseId)                              throws Throwable {    String error_message;    error_message = throwable.getMessage();    //check error message and handle it if you can    if( … ){          //handle exception        …    }    else{       //delegate to the default ADFc exception handler        throw throwable;}    } } Note however, that it is recommended to first try and handle exceptions with the ADF Controller default exception handling mechanism. In the past, I've seen attempts on OTN to handle regular application use cases with custom exception handlers for where there was no need to override the exception handler. So don't go for this solution to quickly and always think of alternative solutions. Sometimes a try-catch-final block does it better than sophisticated web exception handling.

    Read the article

  • Announcement: Employee Info Starter Kit (v6.0–ASP.NET MVC Edition) is Released

    - by Mohammad Ashraful Alam
    Originally posted on: http://geekswithblogs.net/joycsharp/archive/2013/06/16/announcement-employee-info-starter-kit-v6.0asp.net-mvc-edition-is-released.aspxAfter a long wait, the next version of Employee Info Starter Kit is released! This starter kit is basically a project template that contains code samples targeting a specific technology, such as ASP.NET Web Form, ASP.NET MVC etc. Since its first release, this open source project gained a huge popularity in the developer community and had 250K+ combined downloads. This starter kit is honored to be placed at the official ASP.NET site, along with other asp.net starter kits, which all are being considered as the “best” ASP.NET coding standards, recommended by Microsoft. EISK is showcased in Microsoft’s Channel 9’s Weekly Show, as well. The ASP.NET MVC Edition of the new version 6.0 bundles most of the greatest and successful platforms, frameworks and technologies together, to enable web developers to learn and build manageable and high performance web applications with rich user experience effectively and quickly. User End Specifications Creating a new employee record Read existing employee records Update an existing employee record Delete existing employee records Role based security model Key Technology Areas ASP.NET MVC 4 Entity Framework 4.3.1 Sql Server Compact Edition 4 Visual Studio 2012 QuickStart Guide Getting started with EISK 6.0 ASP.NET is pretty easy. Once you've Visual Studio 2012 installed, then just follow the steps as provided below: Download the EISK 6.0 MVC version. Extract the file. From the extracted folder, click the solution file "Eisk.MVC-VS2012.sln". Right click the "Eisk.MVC" project node and select "Select set as StartUp Project". Hit Ctrl+F5 and explore! Architectural Overview Overall architecture is based on Model-View-Controller pattern Support for desktop & mobile browsers. Usage of Domain Model, Repository and Unit of Work pattern from Domain Driven Development approach Usage of Data Annotations in model (entity) classes to centralize basic validation mechanism that facilitates DRY principle Usage of IValidatableObject interface in model (entity) classes that isolates custom business logic from application layer Usage of OOP inheritance and Value Object pattern in model (entity) classes that provides reusability in application architecture Usage of View Model, Editor Model pattern that provides mechanism for testable view rendering logic Several helper classes and extension methods to enable developers build application with reduced code If you want to learn more about it in details, just check the following links: Getting Started - Hands on Coding Walkthrough – Technology Stack - Design & Architecture Enjoy!

    Read the article

  • xsltproc killed, out of memory

    - by David Parks
    I'm trying to split up a 13GB xml file into small ~50MB xml files with this XSLT style sheet. But this process kills xsltproc after I see it taking up over 1.7GB of memory (that's the total on the system). Is there any way to deal with huge XML files with xsltproc? Can I change my style sheet? Or should I use a different processor? Or am I just S.O.L.? <xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0" xmlns:exsl="http://exslt.org/common" extension-element-prefixes="exsl" xmlns:fn="http://www.w3.org/2005/xpath-functions"> <xsl:output method="xml" indent="yes"/> <xsl:strip-space elements="*"/> <xsl:param name="block-size" select="75000"/> <xsl:template match="/"> <xsl:copy> <xsl:apply-templates select="mysqldump/database/table_data/row[position() mod $block-size = 1]" /> </xsl:copy> </xsl:template> <xsl:template match="row"> <exsl:document href="chunk-{position()}.xml"> <add> <xsl:for-each select=". | following-sibling::row[position() &lt; $block-size]" > <doc> <xsl:for-each select="field"> <field> <xsl:attribute name="name"><xsl:value-of select="./@name"/></xsl:attribute> <xsl:value-of select="."/> </field> <xsl:text>&#xa;</xsl:text> </xsl:for-each> </doc> </xsl:for-each> </add> </exsl:document> </xsl:template>

    Read the article

  • Video stutter when using external drive

    - by psion
    When using boxee to play video files off of an external western digital 1TB drive formatted NTFS, I notice a slight stutter in the video every 5-10 seconds. When using mplayer, it doesn't stutter as often, but it still stutters occasionally. If I play the video off of the local sata drive, it plays fine even in boxee. I use this computer as my HTPC and I just switched from windows to linux on it. In windows, I never had any sort of stutter playing movies from the drive. I am using the latest intel graphics drivers (for the intel GMA 950) root@eee-htpc:/home/htpc# grep wd /etc/mtab /dev/sdb1 /mnt/wd2 fuseblk rw,nosuid,nodev,allow_other,blksize=512 0 0 I notice that despite trying to use ntfs or ntfs-3g, ubuntu uses ntfs-fuse which I've heard is slower. /dev/sdb1: Timing buffered disk reads: 80 MB in 3.07 seconds = 26.08 MB/sec root@eee-htpc:/mnt/wd2# dd if=/dev/zero of=./120mb bs=1024 count=120000 root@eee-htpc:/mnt/wd2# time mv ./120mb /home/htpc real 0m2.095s user 0m0.016s sys 0m0.736s Even though fuse has a reputation for being slow, it should easily be fast enough for playing standard definition video files. So why the video stutter? edit: The issue seems to be overhead cpu usage from either playing off of a usb device or ntfs/fuse. Watching CPU usage with top, local files use 10-40% CPU. Watching the same video on the external formatted ntfs, it spikes to 170% (over 100% because of hyperthreading). To me it seems like it must be overhead from the fuse driver, though I don't know if it has more or less overhead than ntfs-3g. It's a EEEBox B202 that has an atom 270, so not exactly the most powerful out there. edit2: I believe the solution would be to use non-fuse drivers or different fuse drivers. so far I have not been able to. edit3: I've probably edited this more times than I should, but as an update I have upgraded ntfs drivers to ntfs-3g 2010.8.8 external FUSE 28 - Third Generation NTFS Driver using the following PPA - ppa:x3lectric/team-iquik-releases. When first opening a video file in boxee that's on ntfs there's still the same amount of lag. After a few minutes of video, the lag seems to go away and the cpu usage comes down to 10-40%. Every so often though, it begins to stutter again. Also, if I skip ahead/back in the file, it begins to stutter a lot.

    Read the article

  • Virtual Box - How to open a .VDI Virtual Machine

    - by [email protected]
    TUESDAY, APRIL 27, 2010 How to open a .VDI Virtual MachineSometimes someone share with us one Virtual machine with extension .VDI, after that we can wonder how and what with?Well the answer is... It is a VirtualBox - Virtual Machine. If you have not downloaded it you can do this easily just follow this post.http://listeningoracle.blogspot.com/2010/04/que-es-virtualbox.htmlorhttp://oracleoforacle.wordpress.com/2010/04/14/ques-es-virtualbox/Ok, Now with VirtualBox Installed open it and proceed with the following:1. Open the Virtual File Manager.2. Click on Actions ? Add and select the .VDI fileClick "Ok"3. Now we can register the new Virtual Machine - Click New, and Click Next4. Write down a Name for the virtual Machine a proceed to select a Operating System and Version. (In this case it is a Linux (Oracle Enterprise Linux or RedHat)Click Next5. Select the memory amount base for the Virtual Machine(Minimal 1280 for our case) - Click Next6. Select the Disk 11GR2_OEL5_32GB.vdi it was added in the virtual media manager in the step 2.Dont forget let selected Boot hard Disk (Primary Master) . Given it is the only disk assigned to the virtual machine.Click Next7. Click Finish8. This step is important. Once you have click on the settings Button. 9. On General option click the advanced settings. Here you must change the default directory to save your Snapshots; my recommendation set it to the same directory where the .Vdi file is. Otherwise you can have the same Virtual Machine and its snapshots in different paths.10. Now Click on System, and proceed to assign the correct memory (If you did not before)Note: Enable "Enable IO APIC" if you are planning to assign more than one CPU to the Virtual Machine.Define the processors for the Virtual machine. If you processor is dual core choose 211. Select the video memory amount you want to assign to the Virtual Machine12. Associated more storage disk to the Virtual machine, if you have more VDI files.(Not our case)The disk must be selected as IDE Primary Master.13. Well you can verify the other options, but with these changes you will be able to start the VM.Note: Sometime the VM owner may share some instructions, if so follow his instructions.14. Finally Start the Virtual Machine (Click > Start)

    Read the article

  • Best Ati Radeon x1200 drivers for 12.10

    - by Jaclyn
    [Long story short is at the bottom if you don't care about my ranting] Ok, well, I have the unfortunate distinction of having an Acer Extensa 4420 (Yes, the model with the faulty motherboard, and no, I do not know how it is still working either). Long story short I need the best drivers for my Ati Radeon x1200 integrated graphics card. The Ati Propriatary drivers for 12.10 no longer supports my video card. Currently when I try to play Minecraft, or any game really, the framerate is quite terrible despite the fact that my handy dandy system load monitor says that I have plenty of memory and CPU power (Mind you, this is when I'm not playing minecraft; that kind of uses up all of my resources unless it's on the worst graphical settings, and even then I have terrible framerate, but plenty of resources left over). I tried the fglrx through a workaround guide, and it completely killed my display and I had to uninstall it. I'm considering just trying to install fglrx through synaptic, but I am hesitant to do so since I don't want a repeat of the BSBDD!!! (Black Screen of Bad Drivers 'o DOOOM!!!), so I will wait until after I get some input from you fine ladies and gentlemen on to what your advice it. ok, so I'm running xubuntu 12.10 64 bit. I upgraded from 10.10 to 11.04. Then about a month ago I went from natty to quantal via the update option in the package updater, and then I decided that I was sick of gnome so I installed xfce. I did not install new drivers from natty to when I wound up at 12.10, so that shouldn't have changed, and they were indeed quite terrible back then, but now I'm using xubuntu as my main os, so I actually need good drivers. uuuugh. Anyway, long story short: I need to know what are the best drivers available for my card, and how to install them, because I am a linux novice, and I have tried everything that I can think of, including search google. Small edit: I forgot to note that since I upgraded to 12.10, my VGA out does not work (I haven't had a chance to try the s-video yet), and possibly related, the USB port on that side of my laptop does not work anymore either.

    Read the article

  • How I might think like a hacker so that I can anticipate security vulnerabilities in .NET or Java before a hacker hands me my hat [closed]

    - by Matthew Patrick Cashatt
    Premise I make a living developing web-based applications for all form-factors (mobile, tablet, laptop, etc). I make heavy use of SOA, and send and receive most data as JSON objects. Although most of my work is completed on the .NET or Java stacks, I am also recently delving into Node.js. This new stack has got me thinking that I know reasonably well how to secure applications using known facilities of .NET and Java, but I am woefully ignorant when it comes to best practices or, more importantly, the driving motivation behind the best practices. You see, as I gain more prominent clientele, I need to be able to assure them that their applications are secure and, in order to do that, I feel that I should learn to think like a malevolent hacker. What motivates a malevolent hacker: What is their prime mover? What is it that they are most after? Ultimately, the answer is money or notoriety I am sure, but I think it would be good to understand the nuanced motivators that lead to those ends: credit card numbers, damning information, corporate espionage, shutting down a highly visible site, etc. As an extension of question #1--but more specific--what are the things most likely to be seeked out by a hacker in almost any application? Passwords? Financial info? Profile data that will gain them access to other applications a user has joined? Let me be clear here. This is not judgement for or against the aforementioned motivations because that is not the goal of this post. I simply want to know what motivates a hacker regardless of our individual judgement. What are some heuristics followed to accomplish hacker goals? Ultimately specific processes would be great to know; however, in order to think like a hacker, I would really value your comments on the broader heuristics followed. For example: "A hacker always looks first for the low-hanging fruit such as http spoofing" or "In the absence of a CAPTCHA or other deterrent, a hacker will likely run a cracking script against a login prompt and then go from there." Possibly, "A hacker will try and attack a site via Foo (browser) first as it is known for Bar vulnerability. What are the most common hacks employed when following the common heuristics? Specifics here. Http spoofing, password cracking, SQL injection, etc. Disclaimer I am not a hacker, nor am I judging hackers (Heck--I even respect their ingenuity). I simply want to learn how I might think like a hacker so that I may begin to anticipate vulnerabilities before .NET or Java hands me a way to defend against them after the fact.

    Read the article

  • It's intellisense for SQL Server

    - by Nick Harrison
    It's intellisense for SQL Server Anyone who has ever worked with me, heard me speak, or read any of writings knows that I am a HUGE fan of Reflector.    By extension,  I am a big fan of Red - Gate   I have recently begun exploring some of their other offerings and came across this jewel. SQL Prompt is a plug in for Visual Studio and SQL Server Management Studio.    It provides several tools to make dealing with SQL a little easier for your friendly neighborhood developer. When you a query window in a database, the plugin kicks in and gathers the metadata for the database that you are in.    As you type a query, you get handy feedback like a list of tables after you type select.    You can select one of the tables, specify * and then tab to expand the select clause to include all of the columns from the selected table.    As you are building up the where clause, you are prompted by the names of columns in the selected tables. If you spend any time writing ad hoc queries or building stored procedures by hand, this can save you substantial time. If you are learning a new data model, this can greatly cut down on your frustration level. The other really cool thing here is Format SQL.   I have searched all over the place for a really good SQL formatter.    Badly formatted  SQL is so much harder to read than well formatted SQL.   Unfortunately, management studio offers no support for keeping your SQL well formatted.    There are many tools available to format your SQL.   Some work better than others.    Some don't work that well at all.   Most will give you some measure of control over how the formatted SQL looks.    SQL Prompt produces good results and is easy to configure. Sadly no tool is perfect, and what would we be without a wish list.    There are some features that I would like to see: Make it easier to paste SQL in and out of code.    Strip off string builder, etc Automate replacing hard coded values with bind variables or parameters In addition to reformatting SQL, which is a huge refactor, support for other SQL refactors would be nice.    Convert join to sub query and vice versa come to mind Wish list a side, this is a wonderful tool that easily saves me an hour or more on most weeks.

    Read the article

  • How to develop "Client script library" for ASP.net controls and how do these work?

    - by Niranjan Kala
    I have been working on .Net platform for 2 years and right now I am working on DevExpress controls for 6 months. All these control have client-side Events which are under some ClientScript nameSpace of particular control, Which specify ClientInstanceName, methods and properties accessible at client side. For example Button1 is ClientInstanceName and Button1.Text is a property, with methods like these: Button1.SetValue(); Button1.GetValue(); In ASP.Net Controls, buttons have the ClientClick event that fires before the Server Side Click event. I have inspected and goggled to extend client side functionality in asp.net controls. For example: create a ClientInstanceName property for controls or CheckedChanged event for CheckBox / RadioButton control. I have tried using these MSDN articles: Injecting Client-Side Script from an ASP.NET Server Control Working with Client-Side Script I got much information and ideas from these articles on how to implement/extend these. All are working in the client side. protected override void AddAttributesToRender(HtmlTextWriter writer) { base.AddAttributesToRender(writer); string script = @"return confirm(""%%POPUP_MESSAGE%%"");"; script = script.Replace("%%POPUP_MESSAGE%%", this.PopupMessage.Replace("\"", "\\\"")); writer.AddAttribute(HtmlTextWriterAttribute.Onclick, script); } Here It is just setting up attribute to the button. but all client side interaction no control from server. Here is that I want to know: How can I implement such functionality to create methods, properties etc. on client side. For example I am creating a PopControl as in the above code snippet same behavior as like Ajax ModalPopupExtender That have OK Button related properties. Ajax Controls can be directed to perform work from server side code e.g. Popup1.show(); How can I do this with such client enabled controls implemented controls as windows do? I am learning creation of Ajax Controls but I do not want to use ScriptManager or depend on another control. Just some extension to standard controls. I am expecting for ideas and implementation methods for such functionality.

    Read the article

  • Dynamic character animation - Using the physics engine or not

    - by Lex Webb
    I'm planning on building a dynamic reactant animation engine for the characters in my 2D Game. I have already built templates for a skeleton based animation system using key frames and interpolation to specify a limbs position at any given moment in time. I am using Farseer physics (an extension of Box2D) in Monogame/XNA in C# My real question lies in how i go about tying this character animation into the physics engine. I have two options: Moving limbs using physics engine - applying a interpolated force to each limb (dynamic body) in order to attempt to get it to its position as donated by the skeleton animation. Moving limbs by simply changing the position of a fixed body - Updating the new position of each limb manually, attempting to take into account physics collisions. Then stepping the physics after the animation to allow for environment interaction. Each of these methods have their distinct advantages and disadvantages. Physics based movement Advantages: Possibly more natural/realistic movement Better interaction with game objects as force applying to objects colliding with characters would be calculated for me. No need to convert to dynamic bodies when reacting to projectiles/death/fighting. Disadvantages: Possible difficulty in calculating correct amount of force to move a limb a certain distance at a constant rate. Underlying character balance system would need to be created that would need to be robust enough to prevent characters falling over at the touch of a feather. Added code complexity and processing time for the above. Static Object movement Advantages: Easy to interpolate movement of limbs between game steps Moving limbs is as simple as applying a rotation to the skeleton bone. Greater control over limbs, wont need to worry about characters falling over as all animation would be pre-defined. Disadvantages: Possible unnatural movement (Depends entirely on my animation skills!) Bad physics collision reactions with physics engine (Dynamic bodies simply slide out of the way of static objects) Need to calculate collisions with physics objects and my limbs myself and apply directional forces to them. Hard to account for slopes/stairs/non standard planes when animating walking/running animations. Need to convert objects to dynamic when reacting to projectile/fighting/death physics objects. The Question! As you can see, i have thought about this extensively, i have also had Google into physics based animation and have found mostly dissertation papers! Which is filling me with sense that it may a lot more advanced than my mathematics skills. My question is mostly subjective based on my findings above/any experience you may have: Which of the above methods should i use when creating my game? I am willing to spend the time to get a physics solution working if you think it would be possible. In the end i want to provide the most satisfying experience for the gamer, as well as a robust and dynamic system i can use to animate pretty much anything i need.

    Read the article

  • How can I fix these errors with Panda3D's sample projects?

    - by lhk
    I just installed the latest Panda3D packages on a Mint 12 32-bit virtual machine. Then I downloaded and configured Eclipse and tried to run the Asteroids sample project. The window is created properly. But after rendering the scence once the game freezes. This happens with the other sample apps, too. Here's the error log: DirectStart: Starting the game. Known pipe types: glxGraphicsPipe (all display modules loaded.) :display:gsg:glgsg(warning): Occlusion queries advertised as supported by OpenGL runtime, but could not get pointers to extension functions. OpenGL Warning: glXChooseFBConfig returning NULL, due to attrib=0x6, next=0xffffffff :display:glxdisplay(warning): No suitable FBConfig contexts available; using XVisual only. depth_bits=16 color_bits=24 alpha_bits=8 stencil_bits=8 accum_bits=64 back_buffers=1 stereo=1 force_hardware=1 AL lib: pulseaudio.c:331: PulseAudio returned minreq > tlength/2; expect break up :display:gsg:glgsg(error): at 4765 of panda/src/glstuff/glGraphicsStateGuardian_src.cxx : invalid enumerant :display:gsg:glgsg(error): at 5703 of panda/src/glstuff/glGraphicsStateGuardian_src.cxx : invalid operation :display:gsg:glgsg(error): at 4654 of panda/src/glstuff/glGraphicsStateGuardian_src.cxx : invalid operation :display:gsg:glgsg(error): at 4654 of panda/src/glstuff/glGraphicsStateGuardian_src.cxx : invalid operation :display:gsg:glgsg(error): at 4765 of panda/src/glstuff/glGraphicsStateGuardian_src.cxx : invalid enumerant :display:gsg:glgsg(error): at 5703 of panda/src/glstuff/glGraphicsStateGuardian_src.cxx : invalid operation :display:gsg:glgsg(error): at 3057 of panda/src/glstuff/glGraphicsStateGuardian_src.cxx : invalid operation :display:gsg:glgsg(error): at 3057 of panda/src/glstuff/glGraphicsStateGuardian_src.cxx : invalid operation :display:gsg:glgsg(error): at 4765 of panda/src/glstuff/glGraphicsStateGuardian_src.cxx : invalid enumerant OpenGL Warning: No pincher, please call crStateSetCurrentPointers() in your SPU :display:gsg:glgsg(error): at 4765 of panda/src/glstuff/glGraphicsStateGuardian_src.cxx : invalid enumerant :display:gsg:glgsg(error): at 5703 of panda/src/glstuff/glGraphicsStateGuardian_src.cxx : invalid operation :display:gsg:glgsg(error): at 4765 of panda/src/glstuff/glGraphicsStateGuardian_src.cxx : invalid enumerant :display:gsg:glgsg(error): at 4765 of panda/src/glstuff/glGraphicsStateGuardian_src.cxx : invalid operation :display:gsg:glgsg(error): at 4765 of panda/src/glstuff/glGraphicsStateGuardian_src.cxx : invalid operation :display:gsg:glgsg(error): at 5703 of panda/src/glstuff/glGraphicsStateGuardian_src.cxx : invalid operation :display:gsg:glgsg(error): at 3661 of panda/src/glstuff/glGraphicsStateGuardian_src.cxx : invalid operation :display:gsg:glgsg(error): at 3661 of panda/src/glstuff/glGraphicsStateGuardian_src.cxx : invalid operation :display:gsg:glgsg(error): at 4765 of panda/src/glstuff/glGraphicsStateGuardian_src.cxx : invalid enumerant :display:gsg:glgsg(error): at 4765 of panda/src/glstuff/glGraphicsStateGuardian_src.cxx : invalid enumerant :display:gsg:glgsg(error): at 5703 of panda/src/glstuff/glGraphicsStateGuardian_src.cxx : invalid operation :display(error): Deactivating glxGraphicsStateGuardian. What can I do to fix the problem ?

    Read the article

  • Hostapd - WLAN as AP

    - by BBK
    I'm trying to start hostapd but without success. I'm using Headless Ubuntu 11.10 oneiric 3.0.0-16-server x86_64. WLAN driver is rt2800usb and my wireless nic card TP-Link TL-WN727N supports AP mode as shows below: us0# ifconfig wlan0 wlan0 Link encap:Ethernet HWaddr 00:27:19:be:cd:b6 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) us0# lsusb Bus 003 Device 003: ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070 Wireless Adapter us0# lshw -C network *-network:3 description: Wireless interface physical id: 4 bus info: usb@3:2 logical name: wlan0 serial: 00:27:19:be:cd:b6 capabilities: ethernet physical wireless configuration: broadcast=yes driver=rt2800usb driverversion=3.0.0-16-server firmware=0.29 link=no multicast=yes wireless=IEEE 802.11bgn us0# hostapd /etc/hostapd/hostapd.conf Configuration file: /etc/hostapd/hostapd.conf Could not read interface wlan0 # The int flags: No such device nl80211 driver initialization failed. ELOOP: remaining socket: sock=4 eloop_data=0xd3e4a0 user_data=0xd3ecc0 handler=0x433880 ELOOP: remaining socket: sock=6 eloop_data=0xd411f0 user_data=(nil) handler=0x43cc10 us0# cat /etc/hostapd/hostapd.conf ssid=Home interface=wlan0 # The interface name of the card #driver=rt2800usb driver=nl80211 macaddr_acl=0 ieee80211n=1 channel=1 hw_mode=g auth_algs=1 ignore_broadcast_ssid=0 wpa=2 wpa_passphrase=88888888 wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP rsn_pairwise=CCMP us0# iw list Wiphy phy0 Band 1: Capabilities: 0x172 HT20/HT40 Static SM Power Save RX Greenfield RX HT20 SGI RX HT40 SGI RX STBC 1-stream Max AMSDU length: 7935 bytes No DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 2 usec (0x04) HT RX MCS rate indexes supported: 0-7, 32 TX unequal modulation not supported HT TX Max spatial streams: 1 HT TX MCS rate indexes supported may differ Frequencies: * 2412 MHz [1] (20.0 dBm) * 2417 MHz [2] (20.0 dBm) * 2422 MHz [3] (20.0 dBm) * 2427 MHz [4] (20.0 dBm) * 2432 MHz [5] (20.0 dBm) * 2437 MHz [6] (20.0 dBm) * 2442 MHz [7] (20.0 dBm) * 2447 MHz [8] (20.0 dBm) * 2452 MHz [9] (20.0 dBm) * 2457 MHz [10] (20.0 dBm) * 2462 MHz [11] (20.0 dBm) * 2467 MHz [12] (20.0 dBm) (passive scanning, no IBSS) * 2472 MHz [13] (20.0 dBm) (passive scanning, no IBSS) * 2484 MHz [14] (20.0 dBm) (passive scanning, no IBSS) Bitrates (non-HT): * 1.0 Mbps * 2.0 Mbps (short preamble supported) * 5.5 Mbps (short preamble supported) * 11.0 Mbps (short preamble supported) * 6.0 Mbps * 9.0 Mbps * 12.0 Mbps * 18.0 Mbps * 24.0 Mbps * 36.0 Mbps * 48.0 Mbps * 54.0 Mbps max # scan SSIDs: 4 Supported interface modes: * IBSS * managed * AP * AP/VLAN * WDS * monitor * mesh point Supported commands: * new_interface * set_interface * new_key * new_beacon * new_station * new_mpath * set_mesh_params * set_bss * authenticate * associate * deauthenticate * disassociate * join_ibss * Unknown command (68) * Unknown command (55) * Unknown command (57) * Unknown command (59) * Unknown command (67) * set_wiphy_netns * Unknown command (65) * Unknown command (66) * connect * disconnect The question is: Why the hostapd not starting?

    Read the article

  • C#/.NET Little Wonders: The Generic Func Delegates

    - by James Michael Hare
    Once again, in this series of posts I look at the parts of the .NET Framework that may seem trivial, but can help improve your code by making it easier to write and maintain. The index of all my past little wonders posts can be found here. Back in one of my three original “Little Wonders” Trilogy of posts, I had listed generic delegates as one of the Little Wonders of .NET.  Later, someone posted a comment saying said that they would love more detail on the generic delegates and their uses, since my original entry just scratched the surface of them. Last week, I began our look at some of the handy generic delegates built into .NET with a description of delegates in general, and the Action family of delegates.  For this week, I’ll launch into a look at the Func family of generic delegates and how they can be used to support generic, reusable algorithms and classes. Quick Delegate Recap Delegates are similar to function pointers in C++ in that they allow you to store a reference to a method.  They can store references to either static or instance methods, and can actually be used to chain several methods together in one delegate. Delegates are very type-safe and can be satisfied with any standard method, anonymous method, or a lambda expression.  They can also be null as well (refers to no method), so care should be taken to make sure that the delegate is not null before you invoke it. Delegates are defined using the keyword delegate, where the delegate’s type name is placed where you would typically place the method name: 1: // This delegate matches any method that takes string, returns nothing 2: public delegate void Log(string message); This delegate defines a delegate type named Log that can be used to store references to any method(s) that satisfies its signature (whether instance, static, lambda expression, etc.). Delegate instances then can be assigned zero (null) or more methods using the operator = which replaces the existing delegate chain, or by using the operator += which adds a method to the end of a delegate chain: 1: // creates a delegate instance named currentLogger defaulted to Console.WriteLine (static method) 2: Log currentLogger = Console.Out.WriteLine; 3:  4: // invokes the delegate, which writes to the console out 5: currentLogger("Hi Standard Out!"); 6:  7: // append a delegate to Console.Error.WriteLine to go to std error 8: currentLogger += Console.Error.WriteLine; 9:  10: // invokes the delegate chain and writes message to std out and std err 11: currentLogger("Hi Standard Out and Error!"); While delegates give us a lot of power, it can be cumbersome to re-create fairly standard delegate definitions repeatedly, for this purpose the generic delegates were introduced in various stages in .NET.  These support various method types with particular signatures. Note: a caveat with generic delegates is that while they can support multiple parameters, they do not match methods that contains ref or out parameters. If you want to a delegate to represent methods that takes ref or out parameters, you will need to create a custom delegate. We’ve got the Func… delegates Just like it’s cousin, the Action delegate family, the Func delegate family gives us a lot of power to use generic delegates to make classes and algorithms more generic.  Using them keeps us from having to define a new delegate type when need to make a class or algorithm generic. Remember that the point of the Action delegate family was to be able to perform an “action” on an item, with no return results.  Thus Action delegates can be used to represent most methods that take 0 to 16 arguments but return void.  You can assign a method The Func delegate family was introduced in .NET 3.5 with the advent of LINQ, and gives us the power to define a function that can be called on 0 to 16 arguments and returns a result.  Thus, the main difference between Action and Func, from a delegate perspective, is that Actions return nothing, but Funcs return a result. The Func family of delegates have signatures as follows: Func<TResult> – matches a method that takes no arguments, and returns value of type TResult. Func<T, TResult> – matches a method that takes an argument of type T, and returns value of type TResult. Func<T1, T2, TResult> – matches a method that takes arguments of type T1 and T2, and returns value of type TResult. Func<T1, T2, …, TResult> – and so on up to 16 arguments, and returns value of type TResult. These are handy because they quickly allow you to be able to specify that a method or class you design will perform a function to produce a result as long as the method you specify meets the signature. For example, let’s say you were designing a generic aggregator, and you wanted to allow the user to define how the values will be aggregated into the result (i.e. Sum, Min, Max, etc…).  To do this, we would ask the user of our class to pass in a method that would take the current total, the next value, and produce a new total.  A class like this could look like: 1: public sealed class Aggregator<TValue, TResult> 2: { 3: // holds method that takes previous result, combines with next value, creates new result 4: private Func<TResult, TValue, TResult> _aggregationMethod; 5:  6: // gets or sets the current result of aggregation 7: public TResult Result { get; private set; } 8:  9: // construct the aggregator given the method to use to aggregate values 10: public Aggregator(Func<TResult, TValue, TResult> aggregationMethod = null) 11: { 12: if (aggregationMethod == null) throw new ArgumentNullException("aggregationMethod"); 13:  14: _aggregationMethod = aggregationMethod; 15: } 16:  17: // method to add next value 18: public void Aggregate(TValue nextValue) 19: { 20: // performs the aggregation method function on the current result and next and sets to current result 21: Result = _aggregationMethod(Result, nextValue); 22: } 23: } Of course, LINQ already has an Aggregate extension method, but that works on a sequence of IEnumerable<T>, whereas this is designed to work more with aggregating single results over time (such as keeping track of a max response time for a service). We could then use this generic aggregator to find the sum of a series of values over time, or the max of a series of values over time (among other things): 1: // creates an aggregator that adds the next to the total to sum the values 2: var sumAggregator = new Aggregator<int, int>((total, next) => total + next); 3:  4: // creates an aggregator (using static method) that returns the max of previous result and next 5: var maxAggregator = new Aggregator<int, int>(Math.Max); So, if we were timing the response time of a web method every time it was called, we could pass that response time to both of these aggregators to get an idea of the total time spent in that web method, and the max time spent in any one call to the web method: 1: // total will be 13 and max 13 2: int responseTime = 13; 3: sumAggregator.Aggregate(responseTime); 4: maxAggregator.Aggregate(responseTime); 5:  6: // total will be 20 and max still 13 7: responseTime = 7; 8: sumAggregator.Aggregate(responseTime); 9: maxAggregator.Aggregate(responseTime); 10:  11: // total will be 40 and max now 20 12: responseTime = 20; 13: sumAggregator.Aggregate(responseTime); 14: maxAggregator.Aggregate(responseTime); The Func delegate family is useful for making generic algorithms and classes, and in particular allows the caller of the method or user of the class to specify a function to be performed in order to generate a result. What is the result of a Func delegate chain? If you remember, we said earlier that you can assign multiple methods to a delegate by using the += operator to chain them.  So how does this affect delegates such as Func that return a value, when applied to something like the code below? 1: Func<int, int, int> combo = null; 2:  3: // What if we wanted to aggregate the sum and max together? 4: combo += (total, next) => total + next; 5: combo += Math.Max; 6:  7: // what is the result? 8: var comboAggregator = new Aggregator<int, int>(combo); Well, in .NET if you chain multiple methods in a delegate, they will all get invoked, but the result of the delegate is the result of the last method invoked in the chain.  Thus, this aggregator would always result in the Math.Max() result.  The other chained method (the sum) gets executed first, but it’s result is thrown away: 1: // result is 13 2: int responseTime = 13; 3: comboAggregator.Aggregate(responseTime); 4:  5: // result is still 13 6: responseTime = 7; 7: comboAggregator.Aggregate(responseTime); 8:  9: // result is now 20 10: responseTime = 20; 11: comboAggregator.Aggregate(responseTime); So remember, you can chain multiple Func (or other delegates that return values) together, but if you do so you will only get the last executed result. Func delegates and co-variance/contra-variance in .NET 4.0 Just like the Action delegate, as of .NET 4.0, the Func delegate family is contra-variant on its arguments.  In addition, it is co-variant on its return type.  To support this, in .NET 4.0 the signatures of the Func delegates changed to: Func<out TResult> – matches a method that takes no arguments, and returns value of type TResult (or a more derived type). Func<in T, out TResult> – matches a method that takes an argument of type T (or a less derived type), and returns value of type TResult(or a more derived type). Func<in T1, in T2, out TResult> – matches a method that takes arguments of type T1 and T2 (or less derived types), and returns value of type TResult (or a more derived type). Func<in T1, in T2, …, out TResult> – and so on up to 16 arguments, and returns value of type TResult (or a more derived type). Notice the addition of the in and out keywords before each of the generic type placeholders.  As we saw last week, the in keyword is used to specify that a generic type can be contra-variant -- it can match the given type or a type that is less derived.  However, the out keyword, is used to specify that a generic type can be co-variant -- it can match the given type or a type that is more derived. On contra-variance, if you are saying you need an function that will accept a string, you can just as easily give it an function that accepts an object.  In other words, if you say “give me an function that will process dogs”, I could pass you a method that will process any animal, because all dogs are animals.  On the co-variance side, if you are saying you need a function that returns an object, you can just as easily pass it a function that returns a string because any string returned from the given method can be accepted by a delegate expecting an object result, since string is more derived.  Once again, in other words, if you say “give me a method that creates an animal”, I can pass you a method that will create a dog, because all dogs are animals. It really all makes sense, you can pass a more specific thing to a less specific parameter, and you can return a more specific thing as a less specific result.  In other words, pay attention to the direction the item travels (parameters go in, results come out).  Keeping that in mind, you can always pass more specific things in and return more specific things out. For example, in the code below, we have a method that takes a Func<object> to generate an object, but we can pass it a Func<string> because the return type of object can obviously accept a return value of string as well: 1: // since Func<object> is co-variant, this will access Func<string>, etc... 2: public static string Sequence(int count, Func<object> generator) 3: { 4: var builder = new StringBuilder(); 5:  6: for (int i=0; i<count; i++) 7: { 8: object value = generator(); 9: builder.Append(value); 10: } 11:  12: return builder.ToString(); 13: } Even though the method above takes a Func<object>, we can pass a Func<string> because the TResult type placeholder is co-variant and accepts types that are more derived as well: 1: // delegate that's typed to return string. 2: Func<string> stringGenerator = () => DateTime.Now.ToString(); 3:  4: // This will work in .NET 4.0, but not in previous versions 5: Sequence(100, stringGenerator); Previous versions of .NET implemented some forms of co-variance and contra-variance before, but .NET 4.0 goes one step further and allows you to pass or assign an Func<A, BResult> to a Func<Y, ZResult> as long as A is less derived (or same) as Y, and BResult is more derived (or same) as ZResult. Sidebar: The Func and the Predicate A method that takes one argument and returns a bool is generally thought of as a predicate.  Predicates are used to examine an item and determine whether that item satisfies a particular condition.  Predicates are typically unary, but you may also have binary and other predicates as well. Predicates are often used to filter results, such as in the LINQ Where() extension method: 1: var numbers = new[] { 1, 2, 4, 13, 8, 10, 27 }; 2:  3: // call Where() using a predicate which determines if the number is even 4: var evens = numbers.Where(num => num % 2 == 0); As of .NET 3.5, predicates are typically represented as Func<T, bool> where T is the type of the item to examine.  Previous to .NET 3.5, there was a Predicate<T> type that tended to be used (which we’ll discuss next week) and is still supported, but most developers recommend using Func<T, bool> now, as it prevents confusion with overloads that accept unary predicates and binary predicates, etc.: 1: // this seems more confusing as an overload set, because of Predicate vs Func 2: public static SomeMethod(Predicate<int> unaryPredicate) { } 3: public static SomeMethod(Func<int, int, bool> binaryPredicate) { } 4:  5: // this seems more consistent as an overload set, since just uses Func 6: public static SomeMethod(Func<int, bool> unaryPredicate) { } 7: public static SomeMethod(Func<int, int, bool> binaryPredicate) { } Also, even though Predicate<T> and Func<T, bool> match the same signatures, they are separate types!  Thus you cannot assign a Predicate<T> instance to a Func<T, bool> instance and vice versa: 1: // the same method, lambda expression, etc can be assigned to both 2: Predicate<int> isEven = i => (i % 2) == 0; 3: Func<int, bool> alsoIsEven = i => (i % 2) == 0; 4:  5: // but the delegate instances cannot be directly assigned, strongly typed! 6: // ERROR: cannot convert type... 7: isEven = alsoIsEven; 8:  9: // however, you can assign by wrapping in a new instance: 10: isEven = new Predicate<int>(alsoIsEven); 11: alsoIsEven = new Func<int, bool>(isEven); So, the general advice that seems to come from most developers is that Predicate<T> is still supported, but we should use Func<T, bool> for consistency in .NET 3.5 and above. Sidebar: Func as a Generator for Unit Testing One area of difficulty in unit testing can be unit testing code that is based on time of day.  We’d still want to unit test our code to make sure the logic is accurate, but we don’t want the results of our unit tests to be dependent on the time they are run. One way (of many) around this is to create an internal generator that will produce the “current” time of day.  This would default to returning result from DateTime.Now (or some other method), but we could inject specific times for our unit testing.  Generators are typically methods that return (generate) a value for use in a class/method. For example, say we are creating a CacheItem<T> class that represents an item in the cache, and we want to make sure the item shows as expired if the age is more than 30 seconds.  Such a class could look like: 1: // responsible for maintaining an item of type T in the cache 2: public sealed class CacheItem<T> 3: { 4: // helper method that returns the current time 5: private static Func<DateTime> _timeGenerator = () => DateTime.Now; 6:  7: // allows internal access to the time generator 8: internal static Func<DateTime> TimeGenerator 9: { 10: get { return _timeGenerator; } 11: set { _timeGenerator = value; } 12: } 13:  14: // time the item was cached 15: public DateTime CachedTime { get; private set; } 16:  17: // the item cached 18: public T Value { get; private set; } 19:  20: // item is expired if older than 30 seconds 21: public bool IsExpired 22: { 23: get { return _timeGenerator() - CachedTime > TimeSpan.FromSeconds(30.0); } 24: } 25:  26: // creates the new cached item, setting cached time to "current" time 27: public CacheItem(T value) 28: { 29: Value = value; 30: CachedTime = _timeGenerator(); 31: } 32: } Then, we can use this construct to unit test our CacheItem<T> without any time dependencies: 1: var baseTime = DateTime.Now; 2:  3: // start with current time stored above (so doesn't drift) 4: CacheItem<int>.TimeGenerator = () => baseTime; 5:  6: var target = new CacheItem<int>(13); 7:  8: // now add 15 seconds, should still be non-expired 9: CacheItem<int>.TimeGenerator = () => baseTime.AddSeconds(15); 10:  11: Assert.IsFalse(target.IsExpired); 12:  13: // now add 31 seconds, should now be expired 14: CacheItem<int>.TimeGenerator = () => baseTime.AddSeconds(31); 15:  16: Assert.IsTrue(target.IsExpired); Now we can unit test for 1 second before, 1 second after, 1 millisecond before, 1 day after, etc.  Func delegates can be a handy tool for this type of value generation to support more testable code.  Summary Generic delegates give us a lot of power to make truly generic algorithms and classes.  The Func family of delegates is a great way to be able to specify functions to calculate a result based on 0-16 arguments.  Stay tuned in the weeks that follow for other generic delegates in the .NET Framework!   Tweet Technorati Tags: .NET, C#, CSharp, Little Wonders, Generics, Func, Delegates

    Read the article

  • Reinventing the Paged IEnumerable, Weigert Style!

    - by adweigert
    I am pretty sure someone else has done this, I've seen variations as PagedList<T>, but this is my style of a paged IEnumerable collection. I just store a reference to the collection and generate the paged data when the enumerator is needed, so you could technically add to a list that I'm referencing and the properties and results would be adjusted accordingly. I don't mind reinventing the wheel when I can add some of my own personal flare ... // Extension method for easy use public static PagedEnumerable AsPaged(this IEnumerable collection, int currentPage = 1, int pageSize = 0) { Contract.Requires(collection != null); Contract.Assume(currentPage >= 1); Contract.Assume(pageSize >= 0); return new PagedEnumerable(collection, currentPage, pageSize); } public class PagedEnumerable : IEnumerable { public PagedEnumerable(IEnumerable collection, int currentPage = 1, int pageSize = 0) { Contract.Requires(collection != null); Contract.Assume(currentPage >= 1); Contract.Assume(pageSize >= 0); this.collection = collection; this.PageSize = pageSize; this.CurrentPage = currentPage; } IEnumerable collection; int currentPage; public int CurrentPage { get { if (this.currentPage > this.TotalPages) { return this.TotalPages; } return this.currentPage; } set { if (value < 1) { this.currentPage = 1; } else if (value > this.TotalPages) { this.currentPage = this.TotalPages; } else { this.currentPage = value; } } } int pageSize; public int PageSize { get { if (this.pageSize == 0) { return this.collection.Count(); } return this.pageSize; } set { this.pageSize = (value < 0) ? 0 : value; } } public int TotalPages { get { return (int)Math.Ceiling(this.collection.Count() / (double)this.PageSize); } } public IEnumerator GetEnumerator() { var pageSize = this.PageSize; var currentPage = this.CurrentPage; var startCount = (currentPage - 1) * pageSize; return this.collection.Skip(startCount).Take(pageSize).GetEnumerator(); } IEnumerator IEnumerable.GetEnumerator() { return this.GetEnumerator(); } }

    Read the article

  • Generating Report for NUnit

    - by thangchung
     All source codes for this post can be found at my github.Time ago, I received a request that people ask me how they can generate reports of the results of testing using NUnit? In fact, I may never do this. In the little world of my programming, I only care about the test results, red-green-refactoring, and that was it. When I got that question quite a bit unexpected, I knew that I could use NCover to generate reports, but reports of NCover too simple, it did not give us more details on the number of test cases, test methods, ... And I began to see about creating interesting report for NUnit.I was lucky to find an open source here. Its authors call it NUnit2Report, but one disadvantage is it only running on .NET 1.0. Indeed too old compared to the current version 4.0. And I try to download the preview, but I could not run. I had to open its source code and found that it uses XSLT to convert the output of NUnit results from XML to HTML. Nothing really special, because I also knew that after NUnit run output file extension is XML is created. Author only use this file to convert to HTML using XSLT. And I decided to convert it to. NET 4.0, because I will not have to code from scratch. Conversion work made me take some time, but was lucky that I finally have what I want. Thanks Gilles for the this OSS. I will send a mail to thank him for his efforts but put this out for the OSS. Now I will show people how to do it. I used the auto built NAnt and NUnit for running TestCase, and I use Selenium testing framework. After writing three TestCase using Selenium, I ran NUnit, and got the following results: There are 1 fail and 2s success. In the bin directory of this project will have the NUnit output file as shown below: Then I create a build file, and a bat file for easy running (can use PowerShell is here also.) Double click in the bat file to create a report like this:       Finally open the index.html file in the folder to view report. As everyone can see, it is the TestCase and divide very clearly, that I meet the requirements. This is really good. Once again I really thank NUnit2Report from Gilles. People can contact him via the mail address [email protected] or website  http://nunit2report.sourceforge.net. It really is useful to those who promised to QA. Hopefully this post will help anyone really interested in doing reports for NUnit.   

    Read the article

  • Opening cursor files in a graphics editor?

    - by sdaau
    I'm looking at /usr/share/icons/DMZ-White/cursors, and there is: $ tree -s /usr/share/icons/DMZ-White/ /usr/share/icons/DMZ-White/ +-- [ 4096] cursors ¦   +-- [ 14] 00008160000006810000408080010102 -> v_double_arrow ... ¦   +-- [ 5] 9d800788f1b08800ae810202380a0822 -> hand2 ¦   +-- [ 8] arrow -> left_ptr ¦   +-- [ 15776] bd_double_arrow ¦   +-- [ 15776] bottom_left_corner ¦   +-- [ 15776] bottom_right_corner ¦   +-- [ 15776] bottom_side ... ... a bunch of files without extension, that GIMP cannot open. Is there an editor where these files can be opened - or at least a converter to something like .png? I can note that ImageMagick display also failed to open these files... Found also Gursor Maker - Cursor Editor for X11/GTK+; got the CVS code from SourceForge - it still uses Numeric (the old name of numpy), so to run it, you'll have to do: #from Numeric import * from numpy import * ... in xcurio.py, curxp.py, gimp.py, colorfunc.py - and comment the #from xml.dom.ext.reader import Sax2 in lsproj.py. With that, I got it running 11.04: ... but cannot get any files to open? So I thought I should grep for paths, nothing much came up - and when I looked into cursordefs.py, I simply had to paste this: CURSOR_ICON = gtk.gdk.pixbuf_new_from_xpm_data([ "10 16 3 1", " c None", ". c #000000", "+ c #FFFFFF", ".. ", ".+. ", ".++. ", ".+++. ", ".++++. ", ".+++++. ", ".++++++. ", ".+++++++. ", ".++++++++.", ".+++++....", ".++.++. ", ".+. .++. ", ".. .++. ", " .++. ", " .++. ", " .. "]) Heh :) In any case, doesn't look like it will be much usable on newer Ubuntus, unfortunately... Just tested XMC plugin as well - on 11.04, has to be built from source (from the link in the accepted answer); the requirements on my system resolved to: sudo apt-get install libgimp2.0-dev libglib2.0-0-dbg libglib2.0-0-refdbg libglib2.0-cil-dev libgtk2.0-0-dbg libgtk2.0-cil-dev ... after that, the configure/make procedure in the INSTALL file works. Note that this plugin is a bit "sneaky": ... that is, you should use "All files" (as there are no extensions); cursor previews at first will not be rendered. Then open one cursor file; after it has been opened, then there is a preview in the File/Open dialog; but other than that, it works fine...

    Read the article

  • What are the software design essentials? [closed]

    - by Craig Schwarze
    I've decided to create a 1 page "cheat sheet" of essential software design principles for my programmers. It doesn't explain the principles in any great depth, but is simply there as a reference and a reminder. Here's what I've come up with - I would welcome your comments. What have I left out? What have I explained poorly? What is there that shouldn't be? Basic Design Principles The Principle of Least Surprise – your solution should be obvious, predictable and consistent. Keep It Simple Stupid (KISS) - the simplest solution is usually the best one. You Ain’t Gonna Need It (YAGNI) - create a solution for the current problem rather than what might happen in the future. Don’t Repeat Yourself (DRY) - rigorously remove duplication from your design and code. Advanced Design Principles Program to an interface, not an implementation – Don’t declare variables to be of a particular concrete class. Rather, declare them to an interface, and instantiate them using a creational pattern. Favour composition over inheritance – Don’t overuse inheritance. In most cases, rich behaviour is best added by instantiating objects, rather than inheriting from classes. Strive for loosely coupled designs – Minimise the interdependencies between objects. They should be able to interact with minimal knowledge of each other via small, tightly defined interfaces. Principle of Least Knowledge – Also called the “Law of Demeter”, and is colloquially summarised as “Only talk to your friends”. Specifically, a method in an object should only invoke methods on the object itself, objects passed as a parameter to the method, any object the method creates, any components of the object. SOLID Design Principles Single Responsibility Principle – Each class should have one well defined purpose, and only one reason to change. This reduces the fragility of your code, and makes it much more maintainable. Open/Close Principle – A class should be open to extension, but closed to modification. In practice, this means extracting the code that is most likely to change to another class, and then injecting it as required via an appropriate pattern. Liskov Substitution Principle – Subtypes must be substitutable for their base types. Essentially, get your inheritance right. In the classic example, type square should not inherit from type rectangle, as they have different properties (you can independently set the sides of a rectangle). Instead, both should inherit from type shape. Interface Segregation Principle – Clients should not be forced to depend upon methods they do not use. Don’t have fat interfaces, rather split them up into smaller, behaviour centric interfaces. Dependency Inversion Principle – There are two parts to this principle: High-level modules should not depend on low-level modules. Both should depend on abstractions. Abstractions should not depend on details. Details should depend on abstractions. In modern development, this is often handled by an IoC (Inversion of Control) container.

    Read the article

  • Network Your Computers & Devices: Step by Step

    - by The Geek
    If you’re looking for a great book to help you learn more about Windows home networking, there’s a new book on the market by our good friend Ciprian, and published by none other than Microsoft Press. Note: our friend Ciprian has been a guest contributor here on How-To Geek in the past, and he’s not only a geek that knows what he’s talking about, he’s also one of the more honest and decent people I’ve worked with. In his spare time, he runs the 7 Tutorials web site. The Book One of the great things about this book is that you aren’t limited to just Windows networking—it also explains how to connect Windows 7, XP, Vista, Mac OS X, and even Linux on the same network and share folders and devices between them. Everything in the book is written in a typical How-To Geek step-by-step format, with plenty of screenshots and pictures to help you through the process. Book Outline If you’re going to be spending some money on the book, you probably want to know what it’s all about, and since the Amazon page doesn’t give, well, much information at all, here’s the entire outline for you: Setting Up a Router and Devices Setting User Account on All Computers Setting Up Your Libraries on All Windows 7 Computers Creating the Network Customizing Network Sharing Settings in Windows 7 Creating the Homegroup and Joining Windows 7 Computers Sharing Libraries and Folders Sharing and Working with Devices Streaming Media Over the Network and the Internet Sharing Between Windows XP, Windows Vista, and Windows 7 Computers Sharing Between Mac OS X and Windows 7 Computers Sharing Between Ubuntu Linux and Windows 7 Computers Keeping the Network Secure Setting Up Parental Controls Troubleshooting Network and Internet Problems It’s a great book, with loads of information, and compared to most tech books isn’t very expensive—only $19.79 for the paperback and $9.99 for the Kindle version. Well worth it, and hey, it’s an official Microsoft Press book—written by a How-To Geek guest author. Network Your Computers & Devices Step by Step [Amazon] Latest Features How-To Geek ETC How To Boot 10 Different Live CDs From 1 USB Flash Drive The 20 Best How-To Geek Linux Articles of 2010 The 50 Best How-To Geek Windows Articles of 2010 The 20 Best How-To Geek Explainer Topics for 2010 How to Disable Caps Lock Key in Windows 7 or Vista How to Use the Avira Rescue CD to Clean Your Infected PC 2011 International Space Station Calendar Available for Download (Free) Ultimate Elimination – Lego Black Ops [Video] BotSync Enables Secure FTP File Synchronization on Android Devices Enjoy Beautiful City Views with the Cityscape Theme for Windows 7 Luigi Installs Any OS on Google’s Cr-48 Notebook DIY iPad Stylus Offers Pen-Based Interaction on the Cheap

    Read the article

< Previous Page | 379 380 381 382 383 384 385 386 387 388 389 390  | Next Page >