Search Results

Search found 11627 results on 466 pages for 'market share'.

Page 384/466 | < Previous Page | 380 381 382 383 384 385 386 387 388 389 390 391  | Next Page >

• How can I connect my Xbox to my Mac on my network

  - by codecowboy

  I have a wireless router/modem (Router 1) in my living room. This is connected to the internet (cable). Wireless is disabled as the router has a terrible wireless range. My Xbox is connected via ethernet to Router 1. Another LAN output from Router 1 connects to a powerline adapter. Router 1 acts as a DHCP server on 192.168.0.x and has the IP 192.168.0.1 In a second room I have Router 2. This has the powerline feed from Router 1 going into the WAN socket. This router runs the Tomato Firmware and acts as a wireless router for the rest of the house using the IP range 192.168.1.x. Router 2 IP is 192.168.1.1. My Mac is connected to Router 2 using a LAN cable and has the IP 192.168.0.133. Several mobile devices need wireless access. I want an ethernet connection to my Mac, not wireless. I should be able to use software like Connect360 to share media from my Mac to the XBox but the XBox does not see my Mac. I can ping 192.168.0.1 from the Mac. Is this possible using my current setup? If so, how?

  Read the article

• Linux And NTFS Permissions

  - by VGE IT

  Trying to restrict a folder within a directory created in linux filesystem. I have changed the permissions to: root rwx, a special active directory group rwx and all others r. Upon doing so, people that are not in the special AD group can access the directory and modify files. Upon doing so the group changes to "Domain Users" when the user modifies documents within the directory. I have to manualy change the documents default group back to my AD group. I have tried to create another AD group and modify permissons to deny write access. When doing so through windows explorer, the settings seem to take affect until I go back in a look at permissions for the restricted group. No permissions show when I view for the second time. Please assist. Samba share properties [MyShare] comment = "blah blah blah" browseable = yes guest ok = no read only = no path = /xxx/xxxxx/ create mask = 0640 directory mask = 0750 admin users = @"domain\Domain Admins", @"domain\group A", @"domain\group B" valid users = @"domain\Domain Admins", @"domain\group A", @"domain\group B" nt acl support = Yes inherit acls = yes inherit owner = yes inherit permissions = yes

  Read the article

• Windows 7 mapped drive kicking off OS X users

  - by Collin White

  I've mapped a network drive on my Windows 7 PC at my office. The windows machine has a few TB of storage that is being accessed by my development team (all running mac os 10.7). The share seems to work fine for a little while but will timeout and kick the mac users off and sometimes disallows a connection on the next attempt. Restarting the windows machine fixes the problem. I've tried this tutorial as well as setting the maximum session length in the Local Security Policy section to 99999 (I discovered 0 did not mean unlimited, only a 'reasonable ammount of time') anyway, the setting is now for ~208 days which is sufficient (see attached). I'm having trouble debugging this in general so if anyone has some pointers I'm all ears. This is a intermittent issue which in my opinion are the hardest kinds to debug. If anyone knows of how I might monitor connections from the PC that would also be pretty cool. Previously the files were hosted on a mac mini and everything was working just fine (the mini just didn't have the ability for the storage capacity we needed) so I believe it is some windows setting that is kicking users off. Anyway, thanks for reading.

  Read the article

• EFS Remote Encryption

  - by Apoulet

  We have been trying to setup EFS across our domain. Unfortunately Reading/Writing file over network share does not work, we get an "Access Denied" error. Another worrying fact is that I managed to get it working for 1 machine but no other would work. The machines are all Windows 2008R2, running as VM under ESXi host. According to: http://technet.microsoft.com/en-us/library/bb457116.aspx#EHAA We setup the involved machine to be trusted for delegation The user are not restricted and can be trusted for delegation. The users have logged-in on both side and can read/write encrypted files without issues locally. I enabled Kerberos logging in the registry and this is the relevant logs that I get on the machine that has the encrypted files. In order for all certificate that the user possess (Only Key Name changes): Event ID 5058: Audit Success, "Other System Events" Key file operation. Subject: Security ID: {MyDOMAIN}\{MyID} Account Name: {MyID} Account Domain: {MyDOMAIN} Logon ID: 0xbXXXXXXX Cryptographic Parameters: Provider Name: Microsoft Software Key Storage Provider Algorithm Name: Not Available. Key Name: {CE885431-9B4F-47C2-8415-2D766B999999} Key Type: User key. Key File Operation Information: File Path: C:\Users\{MyID}\AppData\Roaming\Microsoft\Crypto\RSA\S-1-5-21-4585646465656-260371901-2912106767-1207\66099999999991e891f187e791277da03d_dfe9ecd8-31c4-4b0f-9b57-6fd3cab90760 Operation: Read persisted key from file. Return Code: 0x0[/code] Event ID 5061: Audit Faillure, "System Intergrity" [code]Cryptographic operation. Subject: Security ID: {MyDOMAIN}\{MyID} Account Name: {MyID} Account Domain: {MyDOMAIN} Logon ID: 0xbXXXXXXX Cryptographic Parameters: Provider Name: Microsoft Software Key Storage Provider Algorithm Name: RSA Key Name: {CE885431-9B4F-47C2-8415-2D766B999999} Key Type: User key. Cryptographic Operation: Operation: Open Key. Return Code: 0x8009000b Could this be related to this error from the CryptAcquireContext function NTE_BAD_KEY_STATE 0x8009000BL The user password has changed since the private keys were encrypted. The problem is that the users I using at the moment can not change their password.

  Read the article

• Private staff network within public network

  - by pianohacker

  I'm the sysadmin at a small public library. Since I got here a few years ago, I've been trying to set up the network in a secure and simple way. Security is a little tricky; the staff and patron networks need to be separated, for security reasons. Even if I further isolated the public wireless, I'd still rather not trust the security of our public computers. However, the two networks also need to communicate; even if I set up enough VMs so they didn't share any servers, they need to use the same two printers at the very least. Currently, I'm solving this with some jerry-rigged commodity equipment. The patron network, linked together by switches, has a Windows server connected to it for DNS and DHCP and a DSL modem for a gateway. Also on the patron network is the WAN side of a Linksys router. This router is the "top" of the staff network, and has the same Windows server connected on a different port, providing DNS and DHCP, and another, faster DSL modem (separate connections are very useful, especially as we heavily depend on some cloud-hosted software). tl;dr: We have a public network, and a NATed staff network within it. My question is; is this really the best way to do this? The right equipment would likely make my job easier, but anything with more than four ports and even rudimentary management quickly becomes a heavy hit on our budget. (My original question was about an ungodly frustrating DHCP routing issue, but I thought I'd ask whether my network was broken rather than asking about the DHCP problem and being told my network was broken.)

  Read the article

• Unattended Kickstart Install

  - by Eric

  I've looked around quite a bit and have seen similar setup and questions, but none seem to work for me. I'm using the following command to create a custom ISO: /usr/bin/livecd-creator --config=/usr/share/livecd-tools/test.ks --fslabel=TestAppliance --cache=/var/cache/live This works great and it creates the ISO with all of the packages and configs I want on it. My issue is that I want the install to be unattended. However, every time I start the CD, it asks for all of the info such as keyboard, time zone, root password, etc. These are my basic settings I have in my kickstart script prior to the packages section. cdrom install autopart autostep xconfig --startxonboot rootpw testpassword lang en_US.UTF-8 keyboard us timezone --utc America/New_York auth --useshadow --enablemd5 selinux --disabled services --enabled=iptables,rsyslog,sshd,ntpd,NetworkManager,network --disabled=sendmail,cups,firstboot,ip6tables clearpart --all So after looking around, I was told that I need to modify my isolinux.cfg file to either do "ks=http://X.X.X.X/location/to/test.ks" or "ks=cdrom:/test.ks". I've tried both methods and it still forces me to go through the install process. When I tail the apache logs on the server, I see that the ISO never even tries to get the file. Below are the exact syntax I'm trying on my isolinux.cfg file. label http menu label HTTP kernel vmlinuz0 append initrd=initrd0.img ks=http://192.168.56.101/files/test.ks ksdevice=eth0 label localks menu label LocalKS kernel vmlinuz0 append initrd=initrd0.img ks=cdrom:/test.ks label install0 menu label Install kernel vmlinuz0 append initrd=initrd0.img root=live:CDLABEL=PerimeterAppliance rootfstype=auto ro liveimg liveinst noswap rd_NO_LUKS rd_NO_MD rd_NO_DM menu default EOF_boot_menu The first 2 give me a "dracut: fatal: no or empty root=" error until I give it a root= option and then it just skips the kickstart completely. The last one is my default option that works fine, but just requires a lot of user input. Any help would be greatly appreciated.

  Read the article

• ffmpeg conversion problem

  - by user33126

  installed ffmpeg and it shows version and all correctly. but even info ffmpeg command itself shows ffmpeg -i Alice_In_Wonderland.mp4 gives messgae like FFmpeg version 0.5, Copyright (c) 2000-2009 Fabrice Bellard, et al. configuration: --prefix=/usr --libdir=/usr/lib64 --shlibdir=/usr/lib64 --mandir=/usr/share/man --incdir=/usr/include --extra-cflags=-fPIC --enable-libamr-nb --enable-libamr-wb --enable-libdirac --enable-libfaac --enable-libfaad --enable-libmp3lame --enable-libtheora --enable-libx264 --enable-gpl --enable-nonfree --enable-postproc --enable-pthreads --enable-shared --enable-swscale --enable-x11grab libavutil 49.15. 0 / 49.15. 0 libavcodec 52.20. 0 / 52.20. 0 libavformat 52.31. 0 / 52.31. 0 libavdevice 52. 1. 0 / 52. 1. 0 libswscale 0. 7. 1 / 0. 7. 1 libpostproc 51. 2. 0 / 51. 2. 0 built on Nov 6 2009 19:11:04, gcc: 4.1.2 20080704 (Red Hat 4.1.2-46) Seems stream 1 codec frame rate differs from container frame rate: 49.93 (9986/200) - 49.92 (599/12) Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'Alice_In_Wonderland.mp4': Duration: 00:01:39.65, start: 0.000000, bitrate: 542 kb/s Stream #0.0(und): Audio: aac, 44100 Hz, stereo, s16 Stream #0.1(und): Video: h264, yuv420p, 480x270, 49.92 tbr, 24.96 tbn, 49.93 tbc At least one output file must be specified Please tell me whats the problem

  Read the article

• ffmpeg conversion problem

  - by Elamurugan

  installed ffmpeg and it shows version and all correctly. but even info ffmpeg command itself shows ffmpeg -i Alice_In_Wonderland.mp4 gives messgae like FFmpeg version 0.5, Copyright (c) 2000-2009 Fabrice Bellard, et al. configuration: --prefix=/usr --libdir=/usr/lib64 --shlibdir=/usr/lib64 --mandir=/usr/share/man --incdir=/usr/include --extra-cflags=-fPIC --enable-libamr-nb --enable-libamr-wb --enable-libdirac --enable-libfaac --enable-libfaad --enable-libmp3lame --enable-libtheora --enable-libx264 --enable-gpl --enable-nonfree --enable-postproc --enable-pthreads --enable-shared --enable-swscale --enable-x11grab libavutil 49.15. 0 / 49.15. 0 libavcodec 52.20. 0 / 52.20. 0 libavformat 52.31. 0 / 52.31. 0 libavdevice 52. 1. 0 / 52. 1. 0 libswscale 0. 7. 1 / 0. 7. 1 libpostproc 51. 2. 0 / 51. 2. 0 built on Nov 6 2009 19:11:04, gcc: 4.1.2 20080704 (Red Hat 4.1.2-46) Seems stream 1 codec frame rate differs from container frame rate: 49.93 (9986/200) - 49.92 (599/12) Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'Alice_In_Wonderland.mp4': Duration: 00:01:39.65, start: 0.000000, bitrate: 542 kb/s Stream #0.0(und): Audio: aac, 44100 Hz, stereo, s16 Stream #0.1(und): Video: h264, yuv420p, 480x270, 49.92 tbr, 24.96 tbn, 49.93 tbc At least one output file must be specified Please tell me whats the problem

  Read the article

• Updating Samba From RPMs

  - by KnickerKicker

  My Red Hat Enterprise Edition 4 comes with Samba Version 3.0.10, which does not have support for the "inherit owner" attribute that is essential in implementing a Deny-Delete Write Once Read Many share (for examples, search google for a-shared-drop-box-using-samba). (BTW, if any body knows an alternative way to do it without updating samba, I'm all ears!) I am not all that comfortable building from source, and after hours of googling (no, I do not have a red hat subscription, so I cannot just run the up2date command), I found a whole bunch of rpms on http://ftp.sernet.de/pub/samba/tested/rhel/4/i386/ (Samba 3.2.15 for RHEL 4)... Next, I tried updating them with the rpm -U --nodeps command, but I got file conflict errors. So I went ahead and overwrote everything (or so I thought) by using the rpm's --force option. But no good has come of all that. /usr/sbin/smbd -V still returns the old version. As of now, rpm -qa | grep samba returns, samba3-client-3.2.15-40.el4 samba-3.0.10-1.4E.2 samba-client-3.0.10-1.4E.2 system-config-samba-1.2.21-1 samba3-3.2.15-40.el4 samba-common-3.0.10-1.4E.2 samba3-winbind-3.2.15-40.el4 I cannot remove the older ones because samba-common >= 3.0.8-0.pre1.3 is needed by (installed) gnome-vfs2-smb-2.8.2-8.2.x86_64 libsmbclient.so.0()(64bit) is needed by (installed) kdebase-3.3.1-5.8.x86_64 libsmbclient.so.0()(64bit) is needed by (installed) gnome-vfs2-smb-2.8.2-8.2.x86_64 Now thats a whole bunch of dependencies that I dare not touch :) Any and all pointer are welcome at this stage. Thanks in advance!

  Read the article

• What is easiest no fail way to publish asp.net app?

  - by Maestro1024

  What is easiest no fail way to publish asp.net app? Sorry a bit of an open ended question but I am having issues deploying an asp.net report project and any solution to get the site up is fine. I am running Win7/SQL 2008 and want to publish a asp.net report site that I created in VS 2008. Website launches when I run in debug in Visual studio but I want to publish the site so that it can be seen on the LAN. I published the files off to a folder and started up the IIS manager and added a new site and pointed to that folder. Set the permission on the folder to share to everyone. However when I go to the DNS name I put in for the website it does not launch. Any ideas on this? I see websites out there talking about a web sharing tab on the folder properties but I do not see that when I go to folders. Why might that be? Another avenue I have not pursued yet is publishing directly to a website. Has anyone tried that? Is that better or worse than publishing to filesystem?

  Read the article

• How to connect a USB GDI printer to Linux over a D-Link print server?

  - by jpe

  The setup is the following: +------------+ +-----------------+ +---------+ | HP LJ P1005|--USB--| D-Link DPR-1020 |---LAN---| PC Linux| +------------+ +-----------------+ + +---------+ | +------------+ +--| PC Windows | +------------+ HP LJ P1005 is one of those GDI printers that requires the printer driver to do most of the work for it and therefore is a bit "special". D-Link DPR-1020 is a print server with an Ethernet and an USB port that actually supports printing to challenged (read GDI) printers using a utility called PS-Link. What the utility does is basically mirror a USB port over the network to the print server so that the printer driver and the printer both are happy to talk to each other. The PC-s are notebooks that come and go, i.e. are not there all the time. Is there an equivalent of the D-Link PS-Link utility for Linux that could mirror a USB port over the network for a Linux host? And can the solution be used with D-Link DPR-1020? If not then I basically wasted the money buying the print server because the goal was to share a small printer among a couple of users with diverse operating systems in an office. The print server specs say that it supports Linux and LJ P1005, but the Catch 22 appears to be the solution used for GDI printers... It should be noted that it is possible to print from Linux to LJ P1005 directly over USB. This far sharing involved reconnecting the USB cable to appropriate computer to print. Now one of the desks is separated, so the cable does not work. Searching the net did not yield anything useful. Please do not suggest solutions involving a Windows machine (either virtual or not), my question is whether a solution only involving a Linux machine exists.

  Read the article

• Debugging Windows PC freeze

  - by Violet Giraffe

  I have a problem with my computer, would appreciate any hints/ideas. It usually begins not immediately after booting Windows, but at some unpredictable point in time, which doesn't seem to correlate with any specific actions of mine. First sign of a problem is process System starting to consume 25% CPU time steadily. I have a quad-core CPU, so it might be one thread working non-stop. At this point micro-freezes start to occur - screen stops refreshing, but if I have, say, music player running - it continues playing. If I try to do something between the freezes, like open Start menu, it will freeze completely and forever. If I press reset button the PC will shut down and then start cold, as opposed to usual reset behavior (which doesn't include PC shutting down). I have noticed that full restart upon reset is usual for hardware problems, but I think this problem isn't related to at least motherboard-CPU-RAM-videoadapter. It certainly isn't caused by overheating. One very important not is that it seems to be related to Windows hosted WLAN network: I have USB Wi-Fi dongle and have configured a hosted network to share cable Internet connection with Wi-Fi devices. I am not 100% certain there's a strong connection, but in 9 or 10 cases when I enabled the network (by executing netsh wlan start hostednetwork), it did freeze eventually (sometimes within minutes of starting the network, sometimes within hours), and on at least 10 days when I didn't start the network it never froze, no matter how I used the computer). There are no critical/error entries in the events log that I can suspect as being related, only regular stuff like "driver not loaded". I have found no critical/error events that are being logged around the time of freeze occurring and are not logged during normal boot without starting the WLAN.

  Read the article

• Windows 7 Printing Issue

  - by Adrian Godong

  I am using Windows 7 RTM x64. From Control Panel Devices and Printers, I have three printers listed; Fax, XPS Writer, and a Lexmark. I can print a test page through the printer properties with no problem. I can print a text file from Notepad with no problem. I can't print from Safari. When I press Ctrl+P, it displays the Print dialog, press OK and nothing happened. I can't print from Adobe Reader. When I press Ctrl+P, it complains that it there is no printer installed. I can't print from Office applications. When I press Ctrl+P, it crashes immediately. Running Office Diagnostics does not help. I can't print from IE8. When I press Ctrl+P, it displays the Print dialog, complains that I have to select a printer from the list, selected any of the three printers, the Print button is disabled. Any help? Update (01/11/2009): The default printer is the Lexmark. I'm testing on this one as well. I was about to reinstall Office (as this is the first application that has the problem), but then I tried other, some behave similarly but not identical (maybe caused by different printing implementation). On those applications that is able to display printer selection dialog, I tried the Lexmark and XPS. Neither printed anything (paper for Lexmark, file for XPS). Update (01/12/2009): It seems that my Windows installation is botched. A colleague have similar hardware/software combination (it's the same workstation model and Windows 7 x64) and his can print perfectly fine. I tried adding the printer from his share, no joy. I can test print from the printer property, I can print from Notepad, but not from any other application.

  Read the article

• Production monitoring for EC2 instances

  - by Janine

  I'm setting up my first production instance on EC2 and want to make sure I have all necessary monitoring in place. There are three different types of things I want to monitor: Is the instance running? EC2 instances can be terminated without warning if the underlying hardware fails, and as far as I know they aren't automatically restarted. So if not, start it back up. Is UNIX running properly? This is the usual stuff about CPU load, disk space, etc. Is the website responding? If not, restart it. I initially set up Nagios on a physical server outside the cloud, but it is really only helpful for item 2. It can tell me if the instance is gone or if the website is not responding, but as far as I can tell it can't execute any commands to fix the situation. My Googling on this subject has yielded a plethora of options - Cacti, Monit, God, Ganglia, and probably more I'm forgetting now. I don't have time to research them all. I am aware of Amazon's Cloudwatch but it doesn't seem to do anything that my Nagios installation doesn't already do. If you already have something like this in place, can you please share what has worked well for you?

  Read the article

• Folder redirection GPO doesn't seem to be working

  - by homli322

  I've been trying to set up roaming profiles and folder redirection, but have hit a bit of a snag with the latter. This is exactly what I've done so far: (I have OU permissions and GPO permissions over my division's OU.) Created a group called Roaming-Users in the OU 'Groups' Added a single user (testuser) to the group Using the Group Policy Management tool (via RSAT on Windows 7) I right-clicked on the Groups OU and selected 'Create a GPO in this domain, and Link it here' Added my 'Roaming-Users' group to the Security Filtering section of the policy. Added the Folder Redirection option, specifically for Documents. It is set to redirect to: \myserver\Homes$\%USERNAME%\Documents (Homes$ exists and is sharing-enabled). Right-clicked on the policy under the Groups OU and checked Enforced. Logged into a machine as testuser successfully. Created a simple text file, saved some gibberish, logged off. Remoted into the server with Homes$ on it, noticed that the directory Homes$\testuser was created, but was empty. No text file to be found. From what I've read, I did everything I aught to...but I can't quite figure out the issue. I had no errors when I logged off about syncing issues (offline files is enabled) or anything, so I can only imagine my file should have ended up up on the share. Any ideas? EDIT: Using gpresult /R, I confirmed the user is in fact part of the Roaming-Users group, but does not have the policy applied, if that helps. EDIT 2: Apparently you can't apply GPOs to groups...so I applied to users and used the same security filter to limit it to my test user. Nothing happens as far as redirection goes, but I now have the following error in the event log: Folder redirection policy application has been delayed until the next logon because the group policy logon optimization is in effect

  Read the article

• fedora, dhcpd fails to start

  - by soxs060389

  History: I got a tiny shiny plugserver which I want to plug to my ADSL router (or however you want to call it) on one end (eth0), and the other end (eth1) I want to run a dhcp server for my LAN. ATM I am stuck with getting LAN to work. OS is fedora 12. I configured my /etc/dhcp/dhcpd.conf like this: # # DHCP Server Configuration file. # see /usr/share/doc/dhcp*/dhcpd.conf.sample # see 'man 5 dhcpd.conf' # option domain-name "unknown.org"; option domain-name-servers 192.168.44.1; option subnet-mask 255.255.255.0; option broadcast-address 192.168.44.255; default-lease-time 86400; max-lease-time 172800; subnet 192.168.44.0 netmask 255.255.255.0 { host fedorabigbox { hardware ethernet 00:19:66:8E:61:74; fixed-address 192.168.44.21; } #host mobile #{ # hardware ethernet ***; # fixed-address 192.168.44.22; #} range 192.168.44.100 192.168.44.110; option routers 192.168.44.1; } # this is just dummy, as read many howtos, some suggesting to add a subnet blah netmask blah for each interface subnet 192.168.33.0 netmask 255.255.255.0 { range 192.168.33.100 192.168.33.110; option routers 192.168.33.1; } But the server fails to start when trying to start it via /etc/init.d/dhcpd start In general it would be nice if someone can point me to a in detail explanation of how network works, I am pretty new to this stuff. More concrete question: How to point the subnets to eth1 and the other to eth0, how can this be achieved? Does someone see any errors or flaws? Syntax should be correct, allready checked that with the dhcpd syntax check. Thanks for any help

  Read the article

• On AWS EC2, Unable to run sudo command after modifying permissions to /usr folder

  - by Kayote

  All, We have searched quite a bit and a few of 'Eliah Kagan's' posts are great about getting access back to sudo. However, our server is on AWS EC2 & I am a complete newbie to this. We are trying to setup Cronjobs for backing up our server data. What we did: Using Putty, we created a script file: usr/share/site-db-backup/backupToS3.php, however, Ubuntu was not saving the changes we made as it reported we did not have permission as user 'Ubuntu'. Error details are: "Upload of file backupToS3.php was successful but error occurred while setting the permission &/ or timestamp. If the problem persists, turn on 'ignore permission errors' option. Permission denied. Error code: 3 Request code 9" So, we ran the command "sudo chmod -R a+rwx /usr" for granting permission to the folder 'usr'. However, now whatever sudo command is run, we get the error: "/usr/lib/sudo/sudoers.so must be only be writable by owner. fatal error, unable to load plugins." We are complete newbies to Ubuntu & EC2 so do need step by step guidance of how to get sudo back & successfully write to the Crontab script sitting in 'usr/' folder.

  Read the article

• Set proper rights for sshfs mountpoint so it can be shared with samba

  - by CS01

  I have a domain hoster that provides access via SSH. My platforms are: Gentoo 2.6.36-r5 Windows (XP/Vista/7) I work on my Windows, I use Gentoo to do all the magic Windows can't do. Therefore I use sshfs to mount the remote public directory for my domain to /mnt/mydomain.com. Authentication is done via keys, so lazy me don't have to type in my password every now and then. Since I do my coding on Windows, and I don't want to upload/download the changed files all the time, I want to access this /mnt/mydomain.com via a samba share. So I shared /mnt in samba, all mounts except mydomain.com is listed on my Windows Explorer. My theories are: sshfs does not set the mountpoint uid/gid to something that samba expects samba does not know that it has to include the uid/gid that /mnt/mydomain.com has been set. All above is wrong, and I don't know. Here are configs and output from console, need anything else just let me know. Also no errors or warnings that I take notice of being relevant to this issue, but I might be wrong. gentoo ~ # ls -lah /mnt total 20K drwxr-xr-x 9 root root 4.0K Mar 26 16:15 . drwxr-xr-x 18 root root 4.0K Mar 26 2011 .. -rw-r--r-- 1 root root 0 Feb 1 16:12 .keep drwxr-xr-x 1 root root 0 Mar 18 12:09 buffer drwxr-s--x 1 68591 68591 4.0K Feb 16 15:43 mydomain.com drwx------ 2 root root 4.0K Feb 1 16:12 cdrom drwx------ 2 root root 4.0K Feb 1 16:12 floppy drwxr-xr-x 1 root root 0 Sep 1 2009 services drwxr-xr-x 1 root root 0 Feb 10 15:08 www /etc/samba/smb.conf [mnt] comment = Mount points writable = yes writeable = yes browseable = yes browsable = yes path = /mnt /etc/fstab sshfs#[email protected]:/home/to/pub/dir/ /mnt/mydomain.com/ fuse comment=sshfs,noauto,users,exec,uid=0,gid=0,allow_other,reconnect,follow_symlinks,transform_symlinks,idmap=none,SSHOPT=HostBasedAuthentication 0 0 For an easier read: [email protected] /home/to/pub/dir/ /mnt/mydomain.com/ options: comment=sshfs noauto users exec uid=0 gid=0 allow_other reconnect follow_symlinks transform_symlinks idmap=none SSHOPT=HostBasedAuthentication Help!

  Read the article

• How do I set up a shared directory on Linux?

  - by JR Lawhorne

  I have a linux server I want to use to share files between users in my company. Users will access the machine with sftp or secure shell. Here is what I have: cd /home ls -l drwxrwsr-x 5 userA staff 4096 Jul 22 15:00 shared (other listings omitted) I want all users in the staff group to be able to create, modify, delete any file and/or directory in the shared folder. I don't want anyone else to have access to the folder at all. I have: Added the users to the staff group by modifying /etc/group and running grpconv to update /etc/gshadow Run chown -R userA.staff /home/shared Run chmod -R 2775 /home/shared Now, users in the staff group can create new files but they aren't allowed to open the existing files in the directory for edit. I suspect this is due to the primary group id associated with each user which is still set to be the group created when the user was created. So, the PGID of user 'userA' is 'userA'. I'd rather not change the primary group of the users to 'staff' if I can help it but if it is the easiest option, I would consider it. And, a variation on a theme, I'd like to do this same thing with another directory but also allow the apache user to read files in the directory and serve them. What's the best way to set this up?

  Read the article

• scalable yet doable small-medium office network

  - by Jared

  Hello, I'm studying up with both Microsoft and Cisco literature and I must say, my head is starting to get clustered up (pun intended). I've made a quick network diagram of a theoretical company... Company1 owns Company 2 and Company 3, which are all under separate rooms and networks, but must be able to share a few resources such as files or printers. Given the amount of info out there and best practices, I thought about posting here to get suggestions and see what would the pro's do. I can read and read all day and implement on my own, but if I dont get some outside input, how will I know if I'm doing something wrong, right? anyway, please take a look and see if this is an over-complicated network or a lackluster design for a small-medium company of about 35 people and lets say they will be double that number by end of the year... :) Using win2k3, esxi, windows xp. FCS - forefront client security, ACS - access control system, SPCWK - spiceworks, XCH - Exchange Im not allowed to post an image yet, so here's the link ---- GLIFFY IMAGE Flame suit is on just in case people get mad at me for making an "abomination". I'd really want to get the general overview properly before I dive into the more complicated things

  Read the article

• OpenVPN Keeps Crashing

  - by Frank Thornton

  Oct 20 21:00:44 sb1 openvpn[2082]: <MY_IP>:28523 [vpntest] Peer Connection Initiated with [AF_INET]<MY_IP>:28523 Oct 20 21:00:44 sb1 openvpn[2082]: vpntest/<MY_IP>:28523 MULTI_sva: pool returned IPv4=10.8.0.6, IPv6=(Not enabled) Oct 20 21:00:44 sb1 openvpn[2082]: <MY_IP>:28522 WARNING: 'link-mtu' is used inconsistently, local='link-mtu 1576', remote='link-mtu 1376' Oct 20 21:00:44 sb1 openvpn[2082]: <MY_IP>:28522 WARNING: 'tun-mtu' is used inconsistently, local='tun-mtu 1532', remote='tun-mtu 1332' Oct 20 21:00:45 sb1 openvpn[2082]: <MY_IP>:28522 [vpntest2] Peer Connection Initiated with [AF_INET]<MY_IP>:28522 Oct 20 21:00:45 sb1 openvpn[2082]: vpntest2/<MY_IP>:28522 MULTI_sva: pool returned IPv4=10.8.0.10, IPv6=(Not enabled) Oct 20 21:00:46 sb1 openvpn[2082]: vpntest/<MY_IP>:28523 send_push_reply(): safe_cap=940 Client File: client dev tun proto tcp remote <IP> 443 resolv-retry infinite nobind tun-mtu 1500 tun-mtu-extra 32 mssfix 1410 persist-key persist-tun auth-user-pass comp-lzo SERVER: port 443 #- port proto tcp #- protocol dev tun tun-mtu 1500 tun-mtu-extra 32 reneg-sec 0 #mtu-disc yes mssfix 1410 ca /etc/openvpn/easy-rsa/2.0/keys/ca.crt cert /etc/openvpn/easy-rsa/2.0/keys/server.crt key /etc/openvpn/easy-rsa/2.0/keys/server.key dh /etc/openvpn/easy-rsa/2.0/keys/dh1024.pem plugin /etc/openvpn/openvpn-auth-pam.so /etc/pam.d/login #plugin /usr/share/openvpn/plugin/lib/openvpn-auth-pam.so /etc/pam.d/login #- Comment this line if you are using FreeRADIUS #plugin /etc/openvpn/radiusplugin.so /etc/openvpn/radiusplugin.cnf #- Uncomment this line if you are using FreeRADIUS client-to-client client-cert-not-required username-as-common-name server 10.8.0.0 255.255.255.0 push "redirect-gateway def1" push "dhcp-option DNS 8.8.8.8" push "dhcp-option DNS 8.8.4.4" keepalive 3 30 comp-lzo persist-key persist-tun What is causing the VPN to keep dropping the connection and then reconnecting?

  Read the article

• Set proper rights for sshfs mountpoint so it can be shared with samba

  - by CS01

  I have a domain hoster that provides access via SSH. My platforms are: Gentoo 2.6.36-r5 Windows (XP/Vista/7) I work on my Windows, I use Gentoo to do all the magic Windows can't do. Therefore I use sshfs to mount the remote public directory for my domain to /mnt/mydomain.com. Authentication is done via keys, so lazy me don't have to type in my password every now and then. Since I do my coding on Windows, and I don't want to upload/download the changed files all the time, I want to access this /mnt/mydomain.com via a samba share. So I shared /mnt in samba, all mounts except mydomain.com is listed on my Windows Explorer. My theories are: sshfs does not set the mountpoint uid/gid to something that samba expects samba does not know that it has to include the uid/gid that /mnt/mydomain.com has been set. All above is wrong, and I don't know. Here are configs and output from console, need anything else just let me know. Also no errors or warnings that I take notice of being relevant to this issue, but I might be wrong. gentoo ~ # ls -lah /mnt total 20K drwxr-xr-x 9 root root 4.0K Mar 26 16:15 . drwxr-xr-x 18 root root 4.0K Mar 26 2011 .. -rw-r--r-- 1 root root 0 Feb 1 16:12 .keep drwxr-xr-x 1 root root 0 Mar 18 12:09 buffer drwxr-s--x 1 68591 68591 4.0K Feb 16 15:43 mydomain.com drwx------ 2 root root 4.0K Feb 1 16:12 cdrom drwx------ 2 root root 4.0K Feb 1 16:12 floppy drwxr-xr-x 1 root root 0 Sep 1 2009 services drwxr-xr-x 1 root root 0 Feb 10 15:08 www /etc/samba/smb.conf [mnt] comment = Mount points writable = yes writeable = yes browseable = yes browsable = yes path = /mnt /etc/fstab sshfs#[email protected]:/home/to/pub/dir/ /mnt/mydomain.com/ fuse comment=sshfs,noauto,users,exec,uid=0,gid=0,allow_other,reconnect,follow_symlinks,transform_symlinks,idmap=none,SSHOPT=HostBasedAuthentication 0 0 For an easier read: [email protected] /home/to/pub/dir/ /mnt/mydomain.com/ options: comment=sshfs noauto users exec uid=0 gid=0 allow_other reconnect follow_symlinks transform_symlinks idmap=none SSHOPT=HostBasedAuthentication Help!

  Read the article

• Linux: can't downgrade ATI graphic driver

  - by java.is.for.desktop

  I had the old 10.9 driver of ATI, it worked fine. Sadly, I decided to upgrade it to the new 10.12. After that, HDMI stopped working. So, I want to downgrade back to 10.9. I did everything by the book. But it fails: As root, I do: cd /usr/share/ati sh ./fglrx-uninstall.sh Yes, the uninstall process tells me that everything is fine uninstalled. And after doing reboot, I have the default opensource ATI driver which comes with X11 (or the kernel?). The ATI control panel shortcut points to nowhere. So, the driver seems uninstalled. Now I install the older (10.9) proprietary ATI driver. It also finishes successfully. But after reboot, the ATI control panel tells me that I still have 10.12. And it seems to be true, because HDMI doesn't work. So, how can I completely purge the new non-working driver and downgrade to the old one?

  Read the article

• Change the Powershell $profile directory

  - by Swoogan

  I would like to know how to change my the location my $profile variable points to. PS H:\> $profile H:\WindowsPowerShell\Microsoft.PowerShell_profile.ps1 H:\ is a network share, so when I create my profile file, and load powershell I get the following: Security Warning Run only scripts that you trust. While scripts from the Internet can be useful, this script can potentially harm your computer. Do you want to run H:\WindowsPowerShell\Microsoft.PowerShell_profile.ps1? [D] Do not run [R] Run once [S] Suspend [?] Help (default is "D"): According to Microsoft, the location of the $profile is determined by the %USERPROFILE% environment variable. This is not true: PS H:\> $env:userprofile C:\Users\username For example, I have an XP machine working how I want: PS H:\> $profile C:\Documents and Settings\username\My Documents\WindowsPowerShell\Microsoft.PowerShell_profile.ps1 PS H:\> $env:userprofile C:\Documents and Settings\username PS H:\> $env:homedrive H: PS H:\> $env:homepath \ Here's the same output from the Vista machine where the $profile points to the wrong place: PS H:\> $profile H:\WindowsPowerShell\Microsoft.PowerShell_profile.ps1 PS H:\> $env:userprofile C:\Users\username PS H:\> $env:homedrive H: PS H:\> $env:homepath \ Since $profile isn't actually determined by %USERPROFILE% how do I change it? Clearly anything that involves changing the homedrive or homepath is not the solution I'm looking for.

  Read the article

• Raid-z unaccessible after putting one disk offline

  - by varesa

  I have installed FreeNAS on a test server, with 3x 1Tb drives. They are setup in raidz. I tried to offline one of the disks (from the FreeNAS web-ui), and the array became degraded, as I think it should. The problem is with the array becoming unaccessible after that. I thought a raid like that should be able to run fine with one of the disks missing. Atleast very soon after I offline'd and pulled out the disk, the iSCSI share disappeared from a ESXi host's datastores. I also ssh'd into the FreeNAS server, and tried just executing ls /mnt/raid (/mnt/raid/ being the mount point). The whole terminal froze, not accepting ^C or anything. # zpool status -v pool: raid state: DEGRADED status: One or more devices are faulted in response to IO failures. action: Make sure the affected devices are connected, then run 'zpool clear'. see: http://www.sun.com/msg/ZFS-8000-HC scrub: none requested config: NAME STATE READ WRITE CKSUM raid DEGRADED 1 30 0 raidz1 DEGRADED 4 56 0 gptid/c8c9e44c-08e1-11e2-9ba6-001b212a83ea ONLINE 3 60 0 gptid/c96f32d5-08e1-11e2-9ba6-001b212a83ea ONLINE 3 63 0 gptid/ca208205-08e1-11e2-9ba6-001b212a83ea OFFLINE 0 0 0 errors: Permanent errors have been detected in the following files: /mnt/raid/ raid/iscsivol:<0x0> raid/iscsivol:<0x1> Have I understood the workings of a raidz wrong, or is there something else going on? It would not be nice to have the same thing happen on a production system...

  Read the article

< Previous Page | 380 381 382 383 384 385 386 387 388 389 390 391  | Next Page >