Search Results

Search found 12909 results on 517 pages for 'domain'.

Page 385/517 | < Previous Page | 381 382 383 384 385 386 387 388 389 390 391 392  | Next Page >

• ASA 5540 v8.4(3) vpn to ASA 5505 v8.2(5), tunnel up but I cant ping from 5505 to IP on other side

  - by user223833

  I am having problems pinging from a 5505(remote) to IP 10.160.70.10 in the network behind the 5540(HQ side). 5505 inside IP: 10.56.0.1 Out: 71.43.109.226 5540 Inside: 10.1.0.8 out: 64.129.214.27 I Can ping from 5540 to 5505 inside 10.56.0.1. I also ran ASDM packet tracer in both directions, it is ok from 5540 to 5505, but drops the packet from 5505 to 5540. It gets through the ACL and dies at the NAT. Here is the 5505 config, I am sure it is something simple I am missing. ASA Version 8.2(5) ! hostname ASA-CITYSOUTHDEPOT domain-name rngint.net names ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! interface Vlan1 nameif inside security-level 100 ip address 10.56.0.1 255.255.0.0 ! interface Vlan2 nameif outside security-level 0 ip address 71.43.109.226 255.255.255.252 ! banner motd ***ASA-CITYSOUTHDEPOT*** banner asdm CITY SOUTH DEPOT ASA5505 ftp mode passive clock timezone EST -5 clock summer-time EDT recurring dns server-group DefaultDNS domain-name rngint.net access-list outside_1_cryptomap extended permit ip host 71.43.109.226 host 10.1.0.125 access-list outside_1_cryptomap extended permit ip 10.56.0.0 255.255.0.0 10.0.0.0 255.0.0.0 access-list outside_1_cryptomap extended permit ip 10.56.0.0 255.255.0.0 10.106.70.0 255.255.255.0 access-list outside_1_cryptomap extended permit ip 10.56.0.0 255.255.0.0 10.106.130.0 255.255.255.0 access-list outside_1_cryptomap extended permit ip host 71.43.109.226 host 10.160.70.10 access-list inside_nat0_outbound extended permit ip host 71.43.109.226 host 10.1.0.125 access-list inside_nat0_outbound extended permit ip 10.56.0.0 255.255.0.0 10.0.0.0 255.0.0.0 access-list inside_nat0_outbound extended permit ip 10.56.0.0 255.255.0.0 10.106.130.0 255.255.255.0 access-list inside_nat0_outbound extended permit ip 10.56.0.0 255.255.0.0 10.106.70.0 255.255.255.0 access-list inside_nat0_outbound extended permit ip host 71.43.109.226 10.106.70.0 255.255.255.0 pager lines 24 logging enable logging buffer-size 25000 logging buffered informational logging asdm warnings mtu inside 1500 mtu outside 1500 icmp unreachable rate-limit 1 burst-size 1 icmp permit any inside no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 route outside 0.0.0.0 0.0.0.0 71.43.109.225 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy aaa-server TACACS+ protocol tacacs+ aaa-server TACACS+ (inside) host 10.106.70.36 key ***** aaa authentication http console LOCAL aaa authentication ssh console LOCAL aaa authorization exec authentication-server http server enable http 192.168.1.0 255.255.255.0 inside http 10.0.0.0 255.0.0.0 inside http 0.0.0.0 0.0.0.0 outside snmp-server host inside 10.106.70.7 community ***** no snmp-server location no snmp-server contact snmp-server community ***** snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto map outside_map 1 match address outside_1_cryptomap crypto map outside_map 1 set pfs group1 crypto map outside_map 1 set peer 64.129.214.27 crypto map outside_map 1 set transform-set ESP-3DES-SHA crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 1 authentication pre-share encryption des hash md5 group 2 lifetime 86400 telnet timeout 5 ssh 10.0.0.0 255.0.0.0 inside ssh 0.0.0.0 0.0.0.0 outside ssh timeout 5 console timeout 0 management-access inside dhcpd auto_config outside ! dhcpd address 10.56.0.100-10.56.0.121 inside dhcpd dns 10.1.0.125 interface inside dhcpd auto_config outside interface inside ! dhcprelay server 10.1.0.125 outside dhcprelay enable inside dhcprelay setroute inside dhcprelay timeout 60 threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept tftp-server inside 10.1.1.25 CITYSOUTHDEPOT-ASA-Confg webvpn tunnel-group 64.129.214.27 type ipsec-l2l tunnel-group 64.129.214.27 ipsec-attributes pre-shared-key ***** ! ! prompt hostname context

  Read the article

• NTFS Folder has no owner, no permissions, can't be deleted

  - by winnt93

  Hi, I have a folder a 2003 member server which can't be deleted. Nothing has any permissions (domain admin and running up a cmd prompt as "nt authority\system" using psexec) - always "access denied". When I do a dir /q, the owner shows as "...". I've tried takeown.exe on the folder and also it's parent. The bad folder always reports "access denied". Also tried to reset using icacls, same thing. Explorer permissons has no sharing & security options or tabs. It works fine for other folders, even in the same directory. Bit stumped to say the least. g.

  Read the article

• Super simple high performance http server

  - by masylum

  I´m building a url shortener web application and I would like to know the best architecture to do it in order to provide a fast and reliable service. I would like to have two separate servicies in different machines. The first machine will have the application itself with a apache, nginx, whatever.. The second one will contain the database. The third one will be the one that will be responsible to handle the short url petitions. For the third machine I just need to accept one kind of http petition (GET www.domain.com/shorturl), but it have to do it really fast and it should be stable enough. Which server do you recommend me? Thank's in advance and sorry for my english

  Read the article

• How to move mail among Google Apps for Domains users

  - by Paul Roub

  Considering moving the domain used by my extended family for email to Google Apps. One less server for me to manage, better spam filtering, etc. One thing that's been nice about running my own has been the way I manage my kids' incoming email - it comes to me first, and I drop good mail in a symlinked IMAP folder that we share. A little procmail is all it takes, and straight-through exceptions are easy to implement. (FYI, no I'm not advocating censorship, but manually filtering spam and viruses from my 8-year-old's inbox seems like the right thing to do. YMMV) Anyway. I'm wondering if there's an easy way to do something similar in Google Apps - setting up filters to auto-redirect to me looks easy enough (any gotchas there?), but moving things back is not obvious. Yes, I could access both accounts via IMAP and drag mails across, but does anyone have an easier way?

  Read the article

• multiple servers porting to each other

  - by JackLeo

  hello, here is the details: theres is who "servers": VPS with ubuntu 10.10x32 and home pc, win7 on win7 apatche2.2 is running with webpage on VPS game server is running DNS forwards www subdomain to PC, and everything else to VPS (all via ip) I can not configure DNS directly, my providers do Wanted result: DNS forwards everything to VPS, VPS redirects *:80 to PC when viewing page stored in PC domain is shown normaly Questions: How to achieve that using as minimal resources as possible? Is it possible just tel my DNS provider to fix it that :80 port is in different ip? P.S. its for my friend, i do have some apatche and VDS configuration exp. More of a programmer i am. so trow everything you can ;)

  Read the article

• What ports do I allow over my internal firewall interface?

  - by blsub6

  I have a Cisco ASA that I have VPN tunnels to connect my internal Windows network. I ran into some trouble logging into my domain so I unblocked all the ports on that internal interface. On a previous question posted here, the general consensus was that I should be blocking ports on my inside interface but my question is: what ports should I unblock? I've tried unblocking ports 88, 139, 135, 389, and 445 and Windows logins still give me problems. Is there some MS documentation somewhere that tells me what I need to unblock to allow Windows logins and other things?

  Read the article

• Duplicate of IPSEC certificate template not displaying

  - by Tim Brigham

  I am working on getting IPSEC working on computers outside my domain. I am unable to get a duplicate of the IPSec Offline Request template to show on the web interface. My CA is 2008 R2 Enterprise and the permissions on the template should be adequate to allow me access (my account has read and enroll). If I publish the original template it functions as desired. I also have other custom templates in use (although using autoenrollment). The duplicate is almost identical to the original, excepting that it has a longer validity period and the private key is marked as exportable. How do I debug at this point?

  Read the article

• Temporarily remove Group Policy in Windows 7

  - by rodey

  Using Windows 7 Professional I need to get access to the Folder Options screen. At work we primarily use Windows XP and are connected to a domain. Through Group Policy we disable access to the Folder Options. We use a tool called KillPol that temporarily removes Group Policy and let's me access the screen. This tool doesn't work on Windows 7 and I can't find a replacement. Any ideas on how I can get access to the Folder Options screen in Windows 7 when it is disabled through GP?

  Read the article

• UNC access to TFS SharePoint doesn't work

  - by RobSiklos

  We are using TFS2010 with the SharePoint document portal. We are trying to access the files in SharePoint using UNC paths (e.g. \tfs2010\sites\DefaultCollection\MyProject) and it just plain doesn't work. From my workstation, I actually get different behaviours depending on the path. Case 1: Path = \tfs2010\sites\DefaultCollection\MyProject\ Result: windows explorer reports a network error "Windows cannot access \tfs2010\sites\DefaultCollection\MyProject\" Case 2: Path = \tfs2010.mycompany.com\sites\DefaultCollection\MyProject\ Result: Windows Security dialog pops up asking for my username and password. I tried entering all combinations of my windows username and password (with and without the domain before the username), but no matter what, my credentials are not accepted. I have no problems accessing the SharePoint site through the web portal - it's just UNC which doesn't work. There doesn't seem to be anything relevant in the event viewer on the server. Anyone have any idea what could be the problem?

  Read the article

• Can't connect to IIS7 on one of my machines

  I have 2 computers, both running Win7 Professional x64. Computer "A" (192.168.0.10) is my work machine, it contains my tools etc. Computer "B" (192.168.0.15) is supposed to be my build server / web server for my projects I've installed IIS on "B", and installed IIS7 remote manager on "A". I'm trying to connect from A's IIS7 Manager to B's IIS but I fail. I have little knowledge of IIS, and I feel that's the main reason. I can ping B from A and get positive results so the machines do see each other. A and B are in the same workgroup but not in a domain (if that matters) - they're in my home network. What do I need to do to "see" B's IIS?

  Read the article

• moving my site, IP change worries...

  - by Sherif Buzz

  Hi all, my site has outgrown the shared hosting account it's on and i've setup a VPS that i'll be moving to soon. I cannot keep the same IP between my new account and the old one and I'm a bit at loss as to how to minimize user downtime while the new IP is reflected in all DNS caches. Note I cannot have the site running on both accounts at the same time as it's a dating site and this would cause data inconsistency. Here's what i am planning to do : Put up a 'under maintenance' page on old host Get the site up and running on new host, and update domain to point to new host. Hope downtime isn't too long. Would it be a good idea to have a link on the page in (1) that opens the new site but using it's ip ? Or even redirect all requests at the old host, to the new one (again by ip) ? Any advice much appreciated.

  Read the article

• Ubuntu (desktop) server needed for school

  - by Dave Moody

  I need to build an ubuntu server for school, but I hate with a passion command line interfaces. I need a server with a desktop, like the current win server 2003 (which has crashed, ugh). This server needs to host the school lan domain, have an active directory, and handle the roaming profiles that the students and staff access through WinXP workstations. It also needs to work as a file server, maybe a print server. Can anyone advise me on how to create an Ubuntu server starting with Ubuntu Desktop edition? Much thanks if you respond... Dave.

  Read the article

• How to find dom0 name from hosted domU

  - by svigan

  I'm actually testing RHEL 5.3 with Xen between two servers in order to have a disaster recovery solution. So I'm playing with moving my domU from one dom0 server to the other server. Unfortunatly when somebody else move the domU I don't have any clue where my domain is hosted. I'm wondering where I can't find my dom0 name with inside domU. I'm looking for something like the gzonename command on a solaris sparse zone. I check inside /proc/xen but I don't see anything special except the dom0 kernel release. Does anybody know a wait to find this ?

  Read the article

• Setting Up DHCP Server as Failover

  - by Jason Buhagiar

  I have 2 Domain Controllers running at my company; DC1 has the following roles; ADDS DNS DHCP Scope - 192.168.2.100 - 192.168.2.240 DC2 has the following roles; ADDS - Replicated DNS - Secondary DNS I also have 2 PFSense Gateways both have a different ISP Connection, DHCP Relay is not enabled on any of the machines. Can anyone suggest a way for me to install DHCP Server as FAilover on DC2 please, should I use split scope etc... Help is much appreciated :) Thanks.

  Read the article

• Cross subnet connection [closed]

  - by user30472

  My internal Windows 2008 AD network is 172.20.xxx.xxx My Apple Wireless base stations only allows DHCP 172.16.xxx.xxx Private IP address ranges: 10.0.0.0 to 10.255.255.255 172.16.0.0 to 172.31.255.255 192.168.0.0 to 192.168.255.255 The problem: The internet works from my IPad that has a 172.16.xxx.xxx address, but I can't access (browse) my tools server that is 172.20.xxx.xxx that host my Filemaker database. Is it possible to add 172.16.xxx.xxx range somewhere in DHCP or DNS on my Windows domain server so I can access tools? Or is there another way to make this connection work? Thanks

  Read the article

• How to limit access to Exchange 2003 Mobile Actviesync server by user?

  - by micilin

  So I was asked to set up an Exchange Activesync mobile gateway. That's done. It's a separat eExchange 2003 front-end server configured for SSL, and I've put an off-domain ISA server in front of it. Now I'm being asked to limit which users can connect to it. By default an Exchange front-end server allows any user who has a mail account to connect to the front -end server. So I'm looking at the permissions on the various IIS sites/apps on the server, but I know that it's easy to break Exchange Front-end server perms. So I've got the following in IIS: Exadmin Exchange EchWeb Microsoft-SErver-ActiveSync MobileAdmin OMA And a couple of others that I dont think are relevant. Can I change the permissions on one of these to restrict who can connect to Activesync? As a bonus: Can I do it in a way that does not affect ordinary browser based Exchange Access? Thanks in Advance!!

  Read the article

• Mixed IP and Name Based Virtual Hosts with nginx

  - by nerkn

  I set up many domains but I dont know how to configure if only ip address is given. say foo.com I have a setup to go web/foo.com/htdocs, I want to 88.99.66.55 ip address like a domain to web/fook.com/htdocs server { listen 80; server_name 85.99.66.55; location / { root /home/web/fook.com/htdocs; } location ~ \.(php|php3|php4|php5)$ { root /home/web/fook.com/htdocs; include fastcgi_params; fastcgi_pass 127.0.0.1:9000; } } resulted [warn]: conflicting server name "85.105.65.219" on 0.0.0.0:80, ignored

  Read the article

• How do I prevent 'net ads join' from doing DDNS update?

  - by genehack

  I'm using 'net ads join' to add Linux servers to an AD domain. The servers are multi-homed, with a public IP on eth1 and a non-routable private background network on eth0 (in the 172.20 space, used for netboots and installs and stuff -- no routing to the Internet on that network). When I 'net ads join', it appears that a DDNS entry is getting created for the 172.20 interface. How can I prevent this from happening? (FWIW, my powers at the AD level are very limited -- I can join servers and delete server records but that's about it...)

  Read the article

• Vhost in Apache only working locally?

  - by Gasman

  Ok, I have added lines like: 127.0.0.1 somedomain.com Or some other domain that points to my routers IP, and is forwarded, but I get to the main site, but I want it to go to the subfolder I defined in my httpd-vhosts.conf: NameVirtualHost somedomain.com:80 <VirtualHost somedomain.com:80> DocumentRoot "D:/Apps/xampp/htdocs/somedomain" ServerName somedomain.com ServerAlias somedomain.com </VirtualHost> So, locally somedomain.com works, just remotely it goes to the root htdocs. So If I use a *:80 wildcard I works, but then everything points to the subfolder and all the other vhosts seem to get ignored. Any Idea why this is?

  Read the article

• always need administrator password...even my user and password is correct.. i cannot log in

  - by sulit09

  why the computer always need administrator password. when i change all the setting of my computer, all around ..... and when i log in my administrator password... still not working even it is correct....password....and user..... and this pc is connected to domain.. but i try to other pc . to login all also using windows administrator its open..... what is the problem itry run cmd as administrator need administrator password.....again.. , i try to open the properties of network need administrator passpowrd..again how to solve this problem my new pc is windows 7 .

  Read the article

• How to stop LDAP authentication in ubuntu?

  - by Kery

  My OS is Ubuntu 12.04 and use LDAP authentication. Now I meet a problem that another people want to access my system. But he is in another domain so he can't login. And I have no right to change this configuration in LDAP server. So I have to choose a workaround to solve this problem, for example close the LDAP authentication and use local authentication (I have root right in my system) or create another account which is not registered in LDAP server (I did this but can't change the created account password. The error is 'password reset by root is not supported'). Of course any other suggestion is appreciated! Than you in advance!

  Read the article

• PHP and load balancing

  - by StCee

  I have one major domain but the server spec behind it is not good enough. Hence I want to relay the traffic, in particular php-mysql queries to multiple smaller servers. How is that normally be done? (BTW I wonder how much traffic or number of php/mysql request a normal setup on ec2 micro instance can handle? ) I did have a look of EC2 load balancer. But is it only possible to load balance on machines of your own account?

  Read the article

• SPF records - what are the differences ?

  - by progeny

  I'm trying to set up an SPF record for my domain. I've read the RFC, been to Wikipedia, openspf.org, etc. but I'm still confused. What is the difference between 'a' and 'mx'? When do I use 'mx: rather than 'a:' or 'include:'? What's the point of '?all' (Neutral result) except for debugging? Why do so many people use '~all' (Softfail) instead of '-all' ? I've been to the Wizard (http://old.openspf.org/wizard.html) but I don't understand the questions.

  Read the article

• Certain websites won't load with DHCP server

  - by Simon E

  Hi, I recently configured a server using Windows Server 2008 to take over from my router using DHCP Server. I disabled my router from assigning IPs too. All works well, except for certain sites that refuse to load e.g. "Firefox could not find www.amazon.co.uk" http://www.google.co.uk/ http://www.amazon.co.uk/ http://www.jobsite.co.uk/ I think it may have something to do with co.uk domain. If I reboot the server everything goes back to normal but of course thats not a good solution to do that every other day. Does anyone know of this problem or what it might be - I am very new to server technology.

  Read the article

• Windows XP, have to use ctrl+alt+delete to log on as local administrator

  - by wickedj

  Hey, I have a weird issue, a user was was logging into a laptop using the local admin account which was working fine. I had to create another account on the system, which was also an admin account, when this happened the 'administrator' account disappeared from the 'choose an account to login with' screen. A quick workaround is available, if the user presses ctrl+alt+delete it brings you to the screen where you can type in the username and password, so by manually typing 'administrator' it can log in. Normally this would be easily fixed, I figured the admin account had somehow been disabled from the local system, but i checked all settings and it is setup fine. The laptop is not part of a domain, so I used the management console to delete the new account and all that succeeded in doing was making the 'choose an account to log in with' screen display no accounts to choose. So far I see nothing else to fix it, the option to change the default logon screen to style where you type the username and password also seems to be missing. any ideas?

  Read the article

< Previous Page | 381 382 383 384 385 386 387 388 389 390 391 392  | Next Page >