Search Results

Search found 93619 results on 3745 pages for 'one crayon'.

Page 385/3745 | < Previous Page | 381 382 383 384 385 386 387 388 389 390 391 392  | Next Page >

• Identify SATA hard drive

  - by Rob Nicholson

  Very similar question to: Physically Identify the failed hard drive But for Windows 2003 this time. Scenario: Four identical SATA hard drives plugged into motherboard (no RAID controller here) Configured as single drive in Windows as a spanned volume One of them is starting to fail with error "The driver detected a controller error on \Device\Harddisk3" How do you cross-reference Harddisk3 to the physical SATA connection on the motherboard so you know which drive to replace? I know replacing this drive will trash the spanned array requiring it to be rebuilt anyway so my rough and ready solution is: Delete the spanned partition Create individual partitions on each drive labelled E: F: G: and H: and work out which one is Harddisk3 Power down, remove each disk one at a time, power-up until the drive letter disappears But this seems a rather crude method of identifying the drive. The SATA connectors will be numbered on the motherboard but I appreciate this might not cross-match to what Windows calls them. Thanks, Rob.

  Read the article

• Can I tell which installation DVD was used for my Windows XP?

  - by Den

  I have two Windows XP installation DVDs (that came from the OEM with my two laptops). I need to reinstall Windows on one of them but I'm not sure which one is which. Is there any way to tell which DVD was used for each laptop? PS. They both came from the same OEM and there're no distinguishing markings on the DVDs themselves. PS2. The reason for my concern is to avoid installation twice, which may invalidate license for already installed Windows XP on one laptop if I duplicate it to another.

  Read the article

• Disk quota problem in Windows Server SBS 2003

  - by deddebme

  I have got a new job and the existing SBS 2003 domain setup is unsecure (i.e. everyone is a domain admin etc etc). There are lots of problem due to inexperienced "network admin", and I am trying to fix them one by one. There exist one issue which I found quite weird, that the "Quota" tab exists in the C:(NTFS) drive but not the D:(NTFS) drive. I played around with gpedit to enable disk quota (it was "not configured" before), but still I can't see that tab. Have you seen this problem before? How did you solve it?

  Read the article

• Replacing a Windows File Server

  - by Keltari

  We have a Windows file server that needs to be replaced. Unfortunately, there are to many custom build applications, shares, and random things that rely on the existence of that file server to just stand up a new one, so we need to make the transition as seamless as possible. We decided to copy the contents of the old server to the new and then rename the new one with the same name. I have made a list of everything I need to do. Am I missing anything? The new file server is up and running I copied the directories of the old file server to the new one I set up all the shares/permissions for those directories in advance Copy the contents from oldserver to newserver robocopy \vash\d$\nasshare\ \vash2\l$\originalvash\nasshare\ /E /ZB /copyall /dcopy:T /FP /x /v /fp /np /mt:8 /eta /log:robocopy.log /tee Rename and reIP oldserver to something else (need it available if something is missing) Rename and reIP newserver to oldserver Obviously, I need to test if shares are working properly. Are there any steps im missing?

  Read the article

• Changing Text in Visio Org Chart Shape Changes Multiple Shapes' Text

  - by Eric

  I have inherited an organizational chart that was created in Visio 2003. I am updating it with Visio 2007. When changing the text in one shape, such as a person's title, multiple shapes nearby change their text to the same. For example, if I change Bob's title from Programmer to Programmer/DBA then Wendy's text will change to "Bob - Programmer/DBA". Some changes update three or four other boxes. Some changes will only update one box. My thought is the originator copied or duplicated the one box to create multiple boxes and it created some type of link between them. How do I remove this link? Thanks!

  Read the article

• Skype account migration / username change

  - by Kristian Glass

  Some time ago now I created myself a Skype account. I've since amassed a number of contacts, and also realised that the username I chose really isn't one I wish to continue using, for a variety of reasons. Services like Twitter and GitHub offer username-change functionality; I can't find this in Skype. Am I missing something, or does it just not exist? If, as I suspect, it doesn't exist, is there anything I can do to migrate my contacts across to a new, more sensibly-named, account, or am I going to find myself having to manually publicise my account name change and adding contacts to the new account one-by-one?

  Read the article

• Access 2 sites on same machine behind a router

  - by Luc

  Hello, I have several machines on my lan. On of them is running 2 web sites, first_web_site and second_web_site (each one in a dedicated NameVirtualHost). Another machine is running another site third_web_site. I would like to be able to access each one, within internet, with the url: first_web_site.domain.tld second_web_site.domain.tld third_web_site.domain.tld knowing that 2 sites are on the same machine. Can Apache help me to do this ? I have a machine that will have a apache server to be used for proxy purposes. I was talk to set up virtualhost on this one and use proxy server but I do not know how to do this. Could you please give me hints ? Thanks a lot, Luc

  Read the article

• Sharing VPN from XP to Linux virtual

  - by user55513

  Hi I will keep the question simple with few details, if more is needed tell me. Thanks. I am playing around with networking and virtualbox. So I have 2 virtual machines. One is windows xp and another has linux in it. Windows XP has 2 network cards. One for the internet and the other to connect to the linux computer. Linux has one 1 card and it can only access the internet passing through Windows XP. Internet works fine until I activate OpenVPN on Windows. When I turn on VPN, Linux has no access to it. How can I make linux use VPN too? I believe it has something to do with using the "route" command on XP to send VPN traffic to Linux but I was not able to figure it out how yet.

  Read the article

• Is it possible to combine two internet connections to increase performance?

  - by cornjuliox

  I've got a small home network, 3 PCs plus a laptop or two when the relatives come to visit, connected to a single cable internet connection. Now, as soon as everyone starts using the 'net the performance starts to suffer and if the load is heavy enough nobody can get anything done and everyone complains. At one point it was so bad that only one of us could use it at a time. I was researching possible solutions to this problem and I heard that internet cafes that utilize 2 internet connections, possibly from different providers, and have some sort of router that allows them to split the traffic between the both of them, with online games going through one and web traffic going through another. Is this possible? What is the technical term for it, and can/should it be applied to a home network setup or is there another solution to this problem?

  Read the article

• How are SQL Server CALs counted?

  - by Sam

  Running a SQL Server, as far as I understand it, you need one CAL for every user who connects to the database server. But what happens if the only computer which is accessing the SQL Server is the server running your business layer? If, for example, you got 1 SQL Server and 1 Business logic server, and 100 Clients who all just query and use the business logic server. No client is using the SQL Server directly, no one is even allowed to contact it. So, since there is only one computer using the SQL server, do I need only 1 CAL??? I somehow can't believe this would count as only 1 CAL needed for the SQL Server, but I would like to know why not.

  Read the article

• dhclient append settings from multiple DHCP servers

  - by Brian

  I have a server with two interfaces connected to two separate networks, using DHCP for both. When dhclient is writing /etc/resolv.conf, I would like it to append settings that aren't already there. For instance, if I receive from one DHCP server: nameserver 10.0.0.1 search one.mydomain.com and from another: nameserver 10.1.1.254 search two.mydomain.com Then resolv.conf should look like this: search one.mydomain.com two.mydomain.com nameserver 10.0.0.1 nameserver 10.1.1.254 At the moment, it seems the last dhclient overwrites whatever was there. I know I can preconfigure settings in dhclient.conf using supercede or append, but then I have to hard-code the values. I've scoured the man page for dhclient, but it seems like dhclient prefers to work alone (i.e. not in conjunction with any other dhclients)...or am I missing something?

  Read the article

• what does the @ symbol mean in ls -l directory listing?

  - by Andrew Arrow

  When I run ls -l on my mac I see two .yml files: -rw-r--r-- 1 aa staff 6 Apr 15 05:50 s1.yml -rw-r--r--@ 1 aa staff 362 Apr 15 05:49 s3.yml same owner, same permissions but one has a @ at the end of the permisions. The one with the @ shows up in my editor, the one without does not. So there must be some significance. How can I turn on the @ for the file without it? I selected the files in the finder and did get info and everything looks identical between the two files.

  Read the article

• a load balancing scenario using HAProxy and keepalived shows no performance advantage

  - by chakoshi

  Hi, I am trying to setup a load balanced web server scenario, using two HAproxy load balancers and two debian web servers following this guide http://www.howtoforge.com/setting-up-a-high-availability-load-balancer-with-haproxy-keepalived-on-debian-lenny. the setup is working but the results of simple performance benchmarking is not what I expected. I tried apache benchmark tool to send lots of requests to servers (one time directly testing one of the web servers and the other time testing through the load balancer) using the command "ab -n 1000000 -c 500 http://IP/index.html", but the test results shows better performance for the single server without load balancer. can any one tell me if I'm going wrong on some thing?

  Read the article

• Apache - The name

  - by Josh

  I am working on a migration to a newer virtualized server. The old one has Apache 2.2.4 according to the old servers phpinfo(). The new one with the most up to date has 2.2.3 . How can this be assuming no trickery is involved? The old one is years old. Alot of the guides I reference use apache2 in folders names and many of the conventions. The newest version of things, as I understand it is called httpd. Did apache change the name from what it originally was? (i.e. break the web server component into its own project called httpd, I realize the original daemon was probably still called httpd)

  Read the article

• What's the behaviour when opening a group of files at once?

  - by Leo King

  I selected a group of .odt files, right-clicked the first one and selected open. I would have thought they would open in alphabetical order, but as the second screenshot shows, they're not - the one with "2014-11-13" opens before "2013-10-23". And then when I select the whole group and press Enter, they open in order - and sometimes they don't. What's the behaviour when you right-click and open for a batch of files? Does it start with the one you selected and pick random files in the list to open next?

  Read the article

• Grep all files in a directory and print matches with file name

  - by javanix

  I have a list of log files that I create as part of a video encoding script that I wrote. I would like to search all of them and print out certain statistics from the encode - how fast they were encoded, what settings were used, etc. I can search for the average framerate in one file via this 1 liner: cat ${filename} | grep average which outputs: work: average encoding speed for job is 23.211176 fps and search for the ratefactor: cat ${filename} | grep RF I would like to search all files in the directory and print off one, or prefereably both pieces of information along with the filename. Is there any way I can use find or grep to get this in a one-liner, or do I need to write a script? I would like output like this: /home/javanix/filename.log <RF line> <average line> I would like this to either work using FreeBSD 9 or Ubuntu 12.04.

  Read the article

• Why has ESXi 5.0 not used the software RAID configuration on my test server?

  - by kafka

  I've got a test server which was running WS 2008 Enterprise on the bare metal. It was correctly using the software RAID 1 configuration (2x250 GB disks which appeared as one disk), setup on the Dell Poweredge T110 (which meets compatibility requirements) without requiring any extra setup from me. (As an aside I'm fairly sure it's software RAID, as we didn't spec a hardware RAID controller, if that's of any importance in this situation). I am now testing installing ESXi 5.0 on this server to run some VMs. I've successfully installed ESXi, and imported a VM fine, but it's showing 2 x 250 GB disks available as datastores. However they should be appearing as one volume. When I boot the server, there is a RAID configuration screen you can enter, and I'm guessing this is what I'll have to do at some stage, but now need to be very careful because there is one disk which contains data that I want to be mirrored on the other disk. What is the best thing to do in this situation?

  Read the article

• uninstall mysql on linux with plesk

  - by Arsenal

  I'm having trouble uninstalling linux on my centOS 4 that has plesk. I'm actually trying to upgrade my Mysql 4.1 version to Mysql 5.0 using the following command: yum update mysql I get an error list of conflicted files however. When I try to remove mysql 4.1 and perform a clean install but when I use yum remove mysql* It deletes all of its dependencies and appearantly some of these are files needed by plesk, which causes my plesk to stop working. A did a full restore and everything is okay now, but how can I remove mysql without ruining plesk? I have also tried: rpm -qa | grep mysql to get a list of all files and remove them one by one, but there's a duplicate in that list, so I can't delete those (because it says it doesn't know which one to take). Any help would be greatly appreciated!

  Read the article

• Domain controller failed to restore using windows backup tools

  - by Peilin

  Domain controller failed to restore using windows backup tools One Issue: One 08 R2 domain controller with fully daily backup(only one controller in this company) is out of services due to hardware issue. The below two methods i tried to recover to the new purchasing server,but it is fail. 1)First Method: Using the windows 2008 R2 CD to boot and carry out recover from backup. Everything is OK, but after reboot it will come out blue screen and restart again. 2)Second Method: a)Install the OS in this new server b) Reboot the server to DSRM. c)Using the Windows Backup Tools to restore the system states only After reboot, it will come out the blue screen error and restart again. I know this is may be the different hardware issue, but how to resolve? Or can we only restore the AD services not whole system status? Any suggestion?

  Read the article

• How switch between screen inside screen?

  - by André Andrade

  I have to work inside two environment. One Windows (local) and one Linux (remote). I've installed the screen linux utility in both. I'm able to open a screen on my windows, then in one tab, I opened a ssh connection to the linux remote and I start another screen. Sample linux -- |0 linux remote 0| 1 linux remote 1 windows-- |0 linux | 9 windows I can switch between "linux remote 0" and "linux remote 1" using Atl+. This is configured in .screenrc (bindkey "^[0" select 0) How could I switch to "9 windows"?

  Read the article

• Lost Page Write I/O Errors on CentOS LVM setup

  - by Gregg Leventhal

  I have a CentOS 6 box with LVM setup and one of the PVs is a USB disk (I know). One of them is getting the error: Oct 30 10:57:07 alpha01 kernel: lost page write due to I/O error on dm-3 Oct 30 10:57:07 alpha01 kernel: Buffer I/O error on device dm-3, logical block 4 Which is causing problems with all of the LVs on it. pvs shows the PV as unknown device. I can ls to the logical volumes and they show up in lvdisplay, but first I get a bunch of IO errors. I made sure the cables are secure between the USB drive. What should I do to get this back up and running for the meanwhile? Should I unmount each LV and run an fsck.ext4 on each one like fsck.ext4 -y /dev/vg1/lv_logvolname ?

  Read the article

• Network Role based routing

  - by Steve Butler

  Apologies my networking skills are a tad rusty. I'm looking for a way to setup a system that gives me the ability to setup Role-based access to specific network resources. For example, i have three private subnets for specific groups, users will need access to one one or more subnets. I'd like to have all client machines on the same subnet/vlan, and then use 802.1x to authorize into a router(NAC device/whatever), the router would then see what user had authenticated(huge plus if it could determine AD group), and then allow routing to one or more of the three private subnets based upon their group membership. I've looked at packetFence, and it appears to work by assigning a client to a VLAN, but i'd still need a way to route some users into different back-end networks.

  Read the article

• Choosing a Linux distribution

  - by Luke Puplett

  Dangerous territory with this question so please try to be impartial and instead focus on what to look for when choosing a Linux distribution. I'm completely new to Linux. I thought it'd never happen but I need to have a Linux box to play with and I have a spare fanless Atom PC (32-bit only). I'll be using the machine as a non-commercial hobby server, the trouble is, I don't even know how to compare Linux distributions and why people pick one over another. If anything, I want to have an easy install from USB stick. My question is: what do you look for when choosing a (free?) Linux distribution for a server? If you can, please explain what sorts of things actually differ between one and another without saying which you think is better, just the facts. The way I see it, Linux as a server is just an SSH console and I find it hard to imagine what could be different between one and another.

  Read the article

• How to diagnose RAM?

  - by x-man

  I have a java process that is aborted after a while with SIGSEGV. It started to happen after I upgraded the server with more RAM. Having tested on different JVMs I suspect it might be a hardware problem. But no problem was detected by memtest86. So, what else can I do to detect the source of the problem is? Should I take the RAM modules one by one to detect the faulty module? The server is running on 64bit OpenSuse11.3. The memory is not an ECC one it seems. I have a kit of this (3*4GB * 2 = 24GB): http://www.kingston.com/datasheets/KHX1600C9S3K2_8GX.pdf

  Read the article

• How to get access to console to reset Cisco 3750?

  - by genehack

  I acquired two Cisco 3750 switches from another part of my organization. I was able to complete the standard password/config reset procedure on one without any issues -- boot it, put it into express config mode, telnet in, reset the passwords, etc. The second one doesn't ever boot to the point where it displays anything on the console. When power cycled, the 'SYST' light flashes green a few times, then comes on a solid green and stays lit. None of the other lights ever flash or light up. Holding down the 'MODE' button for up to 30 seconds produces no noticeable effects. Nothing ever comes out on the console. Since I was able to configure the first one without any problems, I know my connectinon is good -- console port configured right, good cable, etc. Is this just a hardware problem with the switch? Is there any way I can recover from this and get the switch back into a state where I can configure it?

  Read the article

< Previous Page | 381 382 383 384 385 386 387 388 389 390 391 392  | Next Page >