Search Results

Search found 11180 results on 448 pages for 'serial port'.

Page 385/448 | < Previous Page | 381 382 383 384 385 386 387 388 389 390 391 392  | Next Page >

• How can I create a VLAN on my extreme switch for a seperate subnet/domain?

  - by drpcken

  I'm putting together a small active directory implementation for a buddy of mine. I currently have 2 servers (one is the primary domain controller) and a couple clients. I need to test and run updates on every machine on this domain, but I would have plug them into my current LIVE domain to get it internet access. From what I've read having two separate domains on a single subnet is a bad idea (even though it is temporary) so I don't want to risk messing anything up on my production domain. I'm pretty sure I can create a separate VLAN on my extreme 48 port switch and plug this smaller domain into it on a different subnet, but I don't know the commands. Both subnets would need internet access of course (one of the things I can't wrap my head around is routing internet traffic between subnets (gateway is on production subnet). My production domain is on subnet 192.168.200.0. My new domain I want to put online would go into subnet 192.168.10.0. A shove in the right direction would be greatly appreciated. Thank you!

  Read the article

• Sendmail Configuration for Exchange Server

  - by user119720

  i need help for sendmail configuration in our linux machine. Here the things: I want to send email to outside by using our exchange server as the mail relay.But when sending the email through the server,it will response "user unknown".To make it worse, it will bounce back all the sent message to my localhost. I already tested our configuration by using external mail server such as gmail and yahoo,the configuration is working without any issue and the email can be sent to the recipient.Most of the configuration of my sendmail is based on here. authinfo file : AuthInfo:my_exchange_server "U:my_name" "I:my_email" "P:my_passwd" "M:PLAIN LOGIN" AuthInfo:my_exchange_server:587 "U:my_name" "I:my_email" "P:my_passwd" "M:PLAIN LOGIN" sendmail.mc : FEATURE(authinfo,hash /etc/mail/authinfo.db) define(`SMART_HOST', `my_exchange server')dnl define('RELAY_MAILER_ARGS', 'TCP $h 587') define('ESMTP_MAILER_ARGS', 'TCP $h 587') define('confCACERT_PATH', '/usr/share/ssl/certs') define('confCACET','/usr/share/ssl/certs/ca-bundle.crt') define('confSERVER_CERT','/usr/share/ssl/certs/sendmail.pem') define('confSERVER_KEY','/usr/share/ssl/certs/sendmail.pem') define('confAUTH_MECHANISMS', 'EXTERNAL GSSAPI DIGEST-MD5 CRAM-MD5 LOGIN PLAIN') TRUST_AUTH_MECH('EXTERNAL DIGEST-MD5 CRAM-MD5 LOGIN PLAIN') define('confAUTH_OPTIONS, 'A')dnl My first assumptions the problem occur is due to the authentication problem, as exchange server need encrypted authentication (DIGEST-MD5).I have already changed this in the authinfo file (from plain login to digest-md5 login) but still not working. I also can telnet our exchange server.So the port is not being blocked by firewall. Can someone help me out with this problems?I'm really at wits ends. Thanks.

  Read the article

• Good HTTP Monitoring tools

  - by ffffff

  I look for HTTP to work with a Linux system server monitor tool every protocol. I know, and will not there be it in whom or a freeware? When, for example, I dump 80/tcp with a packet monitor to be concrete # tethereal -i ppp0 port 80 -x Capturing on ppp0 1244206390.030474 219.111.xx.xx -> 74.125.xx.xx HTTP GET /search?output=js&num=0&dt=1244206414703&client=pub-3031568651010206&q=Cagliari%20Flight&ad=n3&ie=utf8&oe=utf8&channel=0091594208&adtest=off HTTP/1.1 0000 00 04 02 00 00 00 00 00 00 00 00 00 00 00 08 00 ................ 0010 45 00 01 e5 ee 82 40 00 40 06 d2 b5 db 6f 02 5b E.....@[email protected].[ 0020 4a 7d 4f 93 d4 29 00 50 3e df 4c 63 4b 6b 42 e0 J}O..).P>.LcKkB Such output is provided, but there is too much unnecessary information such as an SYN packet or a header. What I want The IP address of the client and sending out character string(Get; the contents of the POST) Among the output character string of the server only as for the HTML (Content-Type:) I am what is chisel) of a thing of text/html. I can set a filter and am the best if only information wanting can accumulate in the log.

  Read the article

• Install multiport module on iptables

  - by tarteauxfraises

  I'am trying to install "fail2ban" on Cubidebian, a Debian port for Cubieboard (A raspberry like board). The following rule failed due to "-m multiport --dports ssh" options (It works, when i run manually the command without multiple options). $ iptables -I INPUT -p tcp -m multiport --dports ssh -j fail2ban-ssh" iptables: No chain/target/match by that name. When i make a cat on "/proc/net/ip_tables_matches", i see that multiport module is not loaded: $ cat /proc/net/ip_tables_matches u32 time string statistic state owner pkttype mac limit helper connmark mark ah icmp socket socket quota2 policy length iprange ttl hashlimit ecn udplite udp tcp The result of iptables -L -n -v command : $ iptables -L -n -v Chain INPUT (policy ACCEPT 6 packets, 456 bytes) pkts bytes target prot opt in out source destination Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 3 packets, 396 bytes) pkts bytes target prot opt in out source destination Chain fail2ban-apache (0 references) pkts bytes target prot opt in out source destination 0 0 RETURN all -- * * 0.0.0.0/0 0.0.0.0/0 Chain fail2ban-ssh (0 references) pkts bytes target prot opt in out source destination 0 0 RETURN all -- * * 0.0.0.0/0 0.0.0.0/0 What can i do to compile or to enable the multiport module? Thanks in advance for your help

  Read the article

• How to handle OpenVPN client as a service, when the laptop is physically on the network already?

  - by James

  The Setup I've gotten OpenVPN working on our Windows XP laptops. Users are limited, so I went ahead and set OpenVPN client to run as a service, which is great anyway because that means they are on the VPN before logging in, so login scripts work, plus we can do remote support even if the user can not log in (such as connecting via VNC or resetting passwords). It is also configured to send all traffic over the tunnel, so when, for example, they browse the internet it is just like browsing from our corporate network. The Qestion(s) So, I'm wondering how does the OpenVPN client act when the computer is already physically on the same network as the OpenVPN server? Right now, the client is configured to connect the the public dns name which will resolve to the public ip address which will NOT get reflected back to the OpenVPN server, so it is affectively blocked from connecting to the OpenVPN server while on the network. Is that a good thing? Or will it constantly try to connect, using up system resources and network resources? We will likely have hundreds of laptops regularly on the physical network with this, so it could contribute to a lot of unnecessary network chatter. Alternatively Would it be better to have the firewall reflect the port back to the OpenVPN server and let it connect? Or have our internal dns resolve the name to the private ip and allow them to connect directly? Would traffic then go over the vpn connection (which I do not want, when already on the physical network)? Or is it possible to tell it to ignore the connection when the client and server are already on the same network? TLDR What's a sane way of handling OpenVPN client running as an always-on service when the client and server will often be on the same network?

  Read the article

• Can not open ports in iptables on CentOS 5??

  - by abszero

  I am trying to open up ports in CentOS's firewall and am having a terrible go at it. I have followed the "HowTo" here: http://wiki.centos.org/HowTos/Network/IPTables as well as a few other places on the Net but I still can't get the bloody thing to work. Basically I wanted to get two things working: VNC and Apache over the internal network. The problem is that the firewall is blocking all attempts to connect to these services. Now if I issue service iptables stop and then try to access the server via VNC or hit the webserver everything works as expected. However the moment I turn iptables back on all of my access is blocked. Below is a truncated version of my iptables file as it appears in vi -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 5801 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 5901 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 6001 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 5900 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 80 -j ACCEPT Really I would just be happy if I could get port 80 opened up for Apache since I can do most stuff via putty but if I could figure out VNC as well that would be cool. As far as VNC goes there is just a single/user desktop that I am trying to connect to via: [ipaddress]:1 Any help would be greatly appreciated!

  Read the article

• Wireless driver activation issue in Compaq c700 in Ubuntu 9.04

  - by Fazil

  I am using Ubuntu 9.04, I cant access my wireless driver, I activate the madwifi in administrationhardware drivers, but I could'nt activated the wireless too. when I type lspci I get the following message, ################################################## # 00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 04) 00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 04) 00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 04) 00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 04) 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 04) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f4) 00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 04) 00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 04) 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 04) 01:00.0 Ethernet controller: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter (rev 01) 02:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) ################################################## but when I tried in Windows I found that the driver for my laptop is ################################################ atheros AR5007 802.11b/g WiFi Adapter ################################################ so what can I do for solving this problem.

  Read the article

• IIS6 site using integrated authentication (NTLM) fails when accessed with Win7 / IE8

  - by Ciove

  Hi, I'm having pretty similar problems as described in case 139099, but the fix there doesn't seem to work for me. Here's the details: Server: Win2003Srv R2 SP2 (stadalone, not a member of a domain). IIS6, TCP/443 (https). Anonymous access disabled. Integrated Windows authentication enabled. Local useraccouts Each useraccount has own virtual folder with change access and read access to site root. The 'adsutil NTAuthenticationProviders "NTLM"' -thing set to site root and useraccount's virtual folder. Client: Win7 Enterprise Member of a AD-Domain IE8 Allows three login attepts then fails. Using [webservername][username] in the logon window (Windows security) Logon using other browsers (Chrome and Firefox) works OK. The Web services log shows one 401.2 and two 401.1 events. The Security Event log shows two events, first is Fauilure Audit (680), The second event is Fauilure Audit (529) with these details: Logon Failure: Reason: Unknown user name or bad password User Name: [username] Domain: [webservername] Logon Type: 3 Logon Process: NtLmSsp Authentication Package: NTLM Workstation Name: [MyWorkstation] Caller User Name: - Caller Domain: - Caller Logon ID: - Caller Process ID: - Transited Services: - Source Network Address: [999.999.999.999] Source Port: 20089 Any ideas appreciated.

  Read the article

• How to troubleshoot Linksys E4200 Remote Management

  - by Jordan

  My Linksys E4200 is configured for Remote Management, but the router is not accepting the connections. Here's the configuration under Administration Management Remote Management Access: Remote Management: Enabled Access via: HTTP Remote Upgrade: Disabled Allowed Remote IP Address: Any IP Address Remote Management Port: 8080 The router is setup to use 192.168.10.41 as its static Internet IP address, and 192.168.35.1 as its LAN IP address. I can access the router just fine via its LAN IP address, but I can't make a connection using http://192.168.10.41:8080. I've tried variations of the settings above (enabled HTTPS, enabled Remote Upgrade, set an IP range of 192.168.10.1-254) but nothing has worked yet. Hoping someone can at least point me in the right direction. Thanks. Update: To clarify, I have a wired router that connects straight to the T1 modem. It's configured to use 192.168.10.1-254 as its internal LAN range. The E4200 wireless router in question is on that LAN using 192.168.10.41 as its WAN IP address. The E4200's internal LAN range is 192.168.35.1-254. I'm not trying to access the E4200 from the Internet, I'm just trying to access it from its WAN IP address. Thanks.

  Read the article

• iptables: How to combine DNAT and SNAT to use a secondary IP address?

  - by Que_273

  There are lots of questions on here about iptables DNAT/SNAT setups but I haven't found one that solves my current problem. I have services bound to the IP address of eth0 (e.g. 192.168.0.20) and I also have a IP address on eth0:0 (192.168.0.40) which is shared with another server. Only one server is active, so this alias interface comes and goes depending on which server is active. In order to get traffic accepted by the service a DNAT rule is used to change the destination IP. iptables -t nat -A PREROUTING -d 192.168.0.40 -p udp --dport 7100 -j DNAT --to-destination 192.168.0.20 I also wish all outbound traffic from this service to appear to come from the shared IP, so that return responses will work in the event of a active-standby failover. iptables -t nat -A POSTROUTING -p udp --sport 7100 -j SNAT --to-source 192.168.0.40 My problem is that the SNAT rule is not always run. Inbound traffic causes a connection tracking entry like this. [root]# conntrack -L -p udp udp 17 170 src=192.168.0.185 dst=192.168.0.40 sport=7100 dport=7100 src=192.168.0.20 dst=192.168.0.185 sport=7100 dport=7100 [ASSURED] mark=0 secmark=0 use=2 which means the POSTROUTING chain is not run and outbound traffic leaves with the real IP address as the source. I am thinking I can set up a NOTRACK rule in the raw table to prevent conntracking for this port number, but is there a better or more efficient way to make this work? Edit - Alternative question: Is there a way (in CentOS/Linux) to have an interface that can be bound to but not used, such that it can be attached to the network or detached when a shared IP address is swapped between servers?

  Read the article

• SFTP, SCP, Secure Webdav: which is the most suitable ?

  - by Xavier Maillard

  Hi, currently, I am hosting a webdav share setup in order to store files I need anywhere I am. It is available via HTTPS. Things are that I do not need all the HTTP machinery -i.e. my nginx http server is only there for this webdav folder. I am not sure I made the best choice. My requirements on the client side are: secured transfers mountable as a network drive at work with 'near realtime sync' usable for any OS I could use (including my mobile (android)) At first, I chose webdav since it would pass through my work proxy (which refuses all that is not on HTTP/S (port 80 or 443)). Today, I am not satisfied with the setup and even if nginx memory footprint is pretty small, its webdav support is not really "clean" and full. What would you recommend between SFTP, SCP and the current webdav solution ? I think SFTP is the closest solution but I still have to find out how to pass through my proxy ;) SCP seems quite limited as I read about it (only file transfers if I read right). Cheers

  Read the article

• Find which files an apache process is writing to?

  - by Haluk

  We have this apache process which becomes io-bound time to time. Using atop, we can see it is a write operation. Using lsof -p <PID> we can see a list of files open by the httpd process. First we thought "log" files must be the problem. So we turned them off just to test. However write operations still continues. We will continue testing a few other things. For instance we use php session variables a lot. Maybe php session files are getting all the writing. But is there a way to quickly identify files which get written to by the httpd process? This way we can focus our efforts on those files. UPDATE: We used the strace command as suggested. Here are two lines from the output. write(23, "\27\0\0\0\3SET CHARACTER SET utf8", 27) = 27 write(23, "\17\0\0\0\3SET NAMES utf8", 19) = 19 We do not have a mysql process on this server. So is strace also showing what is being written to an ethernet port? UPDATE2: During high io load, the process which consumes most of the write resources gives the following output to strace -e trace=write -p <PID>: --- SIGCHLD (Child exited) @ 0 (0) --- write(9, "!", 1) = 1 write(19, "OPTIONS * HTTP/1.0\r\nUser-Agent: Apache (internal dummy connection)\r\n\r\n", 70) = 70 However I cannot figure out where these are being written to.

  Read the article

• Setting a subdomain to access home machine with windows remote desktop

  - by ianhales

  I'm trying to remotely connect to home machine through Windows Remote Desktop (amongst other things, but this is currently my primary focus). I can do this fine using my home WAN's static IP (thank god for cable!) with port-forwarding, but I would like to access it from a subdomain of my web-site (e.g. home.mydomain.co.uk). In the cPanel for my hosting account, I've gone into DNS zones and altered the A-record to point to my WAN's IP, which I thought should do the job, but I still cannot connect. When I ping the subdomain, I get my web-host's IP, which I guess is to be expected as I believe the DNS of the host domain is used first, then my server handles the redirection of traffic to the IP in the A-record. Is this the correct idea? Do A-record changes suffer from the same propagation delays as DNS record changes, as I suppose that could explain it? (by the way, this thread confirms my thoughts that setting the A-record should be enough: Hostmonster Subdomain redirected to home server IP: How to ssh into home server using subdomain)

  Read the article

• Servers/Websites Keep Going Down

  - by Tyler Johnson

  Okay, I'm a noobie. I know how to build and compose a website, but I have no idea what I'm doing when it comes to servers and server commands, etc. I've recently had a problem with all of my sites on our servers going down all at once and then I have to go in and reboot the server for them to come up again. At first this was annoying, but now it is becoming agonizing as it now takes 3-4 reboots for the websites to come back up. I contacted support for my hosting, but they are not being very helpful. They just keep telling me what the issue might be and basically telling me that I'm going to have to look into it and figure it out, which really isn't possible since I know nothing. Anyway, here are the things they said were possible reasons: They said I have "strange logs" in my Apache webserver log, error: sh: fetch: command not found. My php.ini memory limit is: 256M which is very high. It should be 32M or 64M. Server is reaching Max Clients, meaning we have more than 150 visitors at a time. (They supposedly "fixed" this, but the sites/server are still going down) I have some Wordpress sites with plugins getting errors like: PHP Warning: pack(): Type H: illegal hex digit G in... PHP Fatal error: Cannot use object of type stdClass as array in... PHP Fatal error: Maximum execution time of 30 seconds exceeded in... PHP Fatal error: Call to undefined function file_exists() in... PHP Parse error: syntax error, unexpected '<' I know that's a lot, but I really am at wits end and have no idea what to do now. If anyone could maybe give me some advice or point me in the right direction I would greatly appreciate it! Thanks! Oh, and here are the specs for my server: RAM: 2048MB CPU Shares: 40 Primary Disk: 50GB Data Transfer: 75GB Port Speed: 5Mbps Type: Linux

  Read the article

• RabbitMQ Management console not working

  - by rrejc

  I have started with RabbitMQ. I have a (windows) machine on which I installed two RabbitMQ nodes as a service - I have choose the nodename, port and service name for each of them. The services are running normally (i see that they are listening in a netstat-a). I have also installed management plugin with "rabbitmq-plugins enable rabbitmq_management" and restarted both services. But the plugin isn't running - I dont see it listening in a netstat and I can't connect to the management console via browser. Any idea what could be wrong? Is there any log to see what is goind on? Updated: when I do rabbitmq-plugins list i get: c:\RabbitMq\sbin>rabbitmq-plugins list [e] amqp_client 3.0.1 [ ] cowboy 0.5.0-rmq3.0.1-git4b93c2d [ ] eldap 3.0.1-gite309de4 [e] mochiweb 2.3.1-rmq3.0.1-gitd541e9a [ ] rabbitmq_auth_backend_ldap 3.0.1 [ ] rabbitmq_auth_mechanism_ssl 3.0.1 [ ] rabbitmq_consistent_hash_exchange 3.0.1 [ ] rabbitmq_federation 3.0.1 [ ] rabbitmq_federation_management 3.0.1 [ ] rabbitmq_jsonrpc 3.0.1 [ ] rabbitmq_jsonrpc_channel 3.0.1 [ ] rabbitmq_jsonrpc_channel_examples 3.0.1 [E] rabbitmq_management 3.0.1 [e] rabbitmq_management_agent 3.0.1 [ ] rabbitmq_management_visualiser 3.0.1 [e] rabbitmq_mochiweb 3.0.1 [ ] rabbitmq_mqtt 3.0.1 [ ] rabbitmq_old_federation 3.0.1 [ ] rabbitmq_shovel 3.0.1 [ ] rabbitmq_shovel_management 3.0.1 [ ] rabbitmq_stomp 3.0.1 [ ] rabbitmq_tracing 3.0.1 [ ] rabbitmq_web_stomp 3.0.1 [ ] rabbitmq_web_stomp_examples 3.0.1 [ ] rfc4627_jsonrpc 3.0.1-git7ab174b [ ] sockjs 0.3.3-rmq3.0.1-git92d4ba4 [e] webmachine 1.9.1-rmq3.0.1-git52e62bc

  Read the article

• 'The rpc server is unavailable' or 'access is denied' error when using Remote desktop Services Manager on Windows 7 (but mstsc.exe works!)

  - by tbone

  I am trying to connect to a Windows XP workstation from a Windows 7 Ultimate workstation using Remote Desktop Services Manager. I am able to do a Remote Desktop (mstsc.exe) session from the Win7 machine to the WinXP machine with no problem at all. When running the Remote Desktops Admin (tsmmc.msc) too on a Windows XP box, I can also connect with no problem. However, when I use the new Remote Desktop Services Manager on Windows 7 and try to connect, I get the error: "The rpc server is unavailable" What could cause this? Has there been some fundamental change in Remote Desktop Services Manager, does it connect in a different way somehow? Update #1 Turned off firewall on the Windows XP box and the "The rpc server is unavailable" error went away; so RDSM seems to be using an entirely new port/connection/service compared to mstsc.exe or the old Remote Desktops Admin tool. Now... after disabling the firewall, I get a new error: Access is Denied. After doing some googling, I found some articles discussing this; basically, the error is very misleading - the actual problem is, if either side of the connection has dual monitors, and they are not both Win7 Ultimate, then you cannot connect using Remote Desktop Services Manager...the reason is, by default it uses the /multimon switch, and this switch requires a certain level of Windows license - and, there seems to be no way of changing this default (if anyone knows of a way to change this default, please post an answer or comment!). Nice going Microsoft. http://social.technet.microsoft.com/Forums/en-US/windowsserver2008r2rds/thread/4d06278f-e0f4-4f8e-a8e1-3697ee967ef4 http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Windows/Windows_7/Q_26225743.html

  Read the article

• Linux Centos 6 becomes unavailable from time to time - OS&network issue

  - by adoado0

  I am encountering following problem. There is one server (DL160 G5) running Centos 6.3 with default kernel 2.6.32-220.2.1.el6.x86_64 - at this point I'd like to add that issue appeared also at older version - 6.1 and older kernel (do not remember exactly which version). There is cPanel installed and from time to time it becomes unavailable (network connection). What I've checked is (via KVMoIP): load average is completely normal it does not lack memory or disk space when problem occurs no console notifications checked all access logs and there is no sign that it can be caused by a client script cannot even access local interface (127.0.0.1) or main IP address running tcpdump I can only see packets arriving to server - no responses all services seem to be running properly (mail,sql,http,ssh) checked crontab and all clients' crontabs too network port utilisation is low ( up to several Mbits) arriving packet rate is low - hundreds per second (according to tcpdump) console (via kvmoip) works fine, no lags there is no conntrack at this server there is no ipv6 at this server flushing iptables, unloading modules does not resolve problem restarting network does not resolve problem, no errors appear it also occurs when two sepearate networks are configured (and multiple gateways) as well as one IP, one default gw and one network is configured - so it seems network configuration independent it seems to repeat randomly (load,packet rate,bandwith usage,load independent) checked server with different rootkit detection tools - it seems to be clean server has been rebooted, it did not change anything there are no interface errors it apperas randomly can be once a week or several times per day It usually works fine after 1-15 minutes. What I can also check? It is definitely OS issue - there is traffic at interface only in one direction when problem occurs, can not even ping loopback. Any ideas? Recommended checks? Anything I did not checked above.

  Read the article

• CD Drive not discovered

  - by user1009073

  I have a self built computer. it uses a P6T Deluxe motherboard, which has both SATA and IDE ports. This was built several years ago, and had an IDE CD/DVD drive. This drive started going bad (would not burn CDs correctly), so I decided to replace it. I had difficultly finding an IDE DVD drive, so I bought a SATA DVD drive. I opened the comnputer, took out the old DVD drive. I left the IDE cable in place, connected to the motherboard, but it is not connected to any drives. I hooked up the new DVD drive, both power and with a SATA data cable (SATA port 3 if I recall). (Sony Optiarc 24x , Newegg URL: http://www.newegg.com/Product/Product.aspx?Item=N82E16827118067 ) When I power on my computer, the drive does NOT show up in Explorer. I can hit the DVD eject button, and the drive will open up, so I know it at least is getting power. I thought, maybe something in the BIOS. When I go to BIOS, boot devices, it shows (1) floppy, (2) my hard drive (3) ATAPI CD Drive. The only other possible BIOS option I could find was uder 'Storage Configuration'. Configure Storage as: My setting is RAID, since I am using two drives in a RAID configuration. Other options were IDE and ACHI. Other than trying to find an IDE DVD drive, is there anything else I can try? The drive does not show up at all in Windows Explorer. I did put in a CD thinking that might help, but nothing happened. Thanks, GS

  Read the article

• Two screens hooked to one laptop

  - by mplacona

  Hi, I'm thinking of getting rid of my desktop, and using my (much better) laptop instead. I'm only wondering if I would be able to hook the two screens I have with it, so I'd end up with three screens. I've seen people doing it to desktops, but am not sure the same could be accomplished with a laptop. My laptop is a sony vaio, and it's got both a VGA output, and an HDMI output. It'd be great is I could simply hook two screens to it, and have three independent screens (not mirrored). on my desktop, I have pretty much the same thing, but with an extra DVI port. I connect the DVI to one screen, and the VGA to an older one. Trying to connect anything to the HDMI simply mirrors whatever is on the DVI (I've tried it a long time ago) So I was wondering if with the laptop I'd be able to do it, and end up with three independent screens. I don't know if there's anything else I could be using instead (i.e. any extra hardware), so recommendations are more than welcome. Thanks in advance, Marcos

  Read the article

• Amavisd-new(2.6.4-3) failing to do "lookup_sql_dsn" when large number of emails are need to be accessed

  - by sandip

  Amavis is failing to do sql lookup when large number of emails are sent to amavis. Its throwing out error after scanning 40 to 50 email. It shows error like. (!!)TROUBLE in process_request: sql exec: err=7, 57P01,DBD::Pg::st bind_param failed:FATAL: terminating connection due to administrator command\nSSL connection has been closed unexpectedly at (eval 103) line 164, <GEN50> line 5. at (eval 104) line 280, <GEN50> line 5. As soon as this error appears in the logs, Amavis stops and port 10024 is closed. Thinking it to an error due to ssl connection in the database(postgresql-8.4), i had stopped ssl in postgres, but it was of no use. I have tried to configure amavis on another server, but i got the same error again. This happening on a production server, So i am not being able to scan emails as per user settings. Anybody have any idea, what may be the source of this error ?? Please help. Thanks in advance

  Read the article

• Two screens hooked to one laptop

  - by mplacona

  Hi, I'm thinking of getting rid of my desktop, and using my (much better) laptop instead. I'm only wondering if I would be able to hook the two screens I have with it, so I'd end up with three screens. I've seen people doing it to desktops, but am not sure the same could be accomplished with a laptop. My laptop is a sony vaio, and it's got both a VGA output, and an HDMI output. It'd be great is I could simply hook two screens to it, and have three independent screens (not mirrored). on my desktop, I have pretty much the same thing, but with an extra DVI port. I connect the DVI to one screen, and the VGA to an older one. Trying to connect anything to the HDMI simply mirrors whatever is on the DVI (I've tried it a long time ago) So I was wondering if with the laptop I'd be able to do it, and end up with three independent screens. I don't know if there's anything else I could be using instead (i.e. any extra hardware), so recommendations are more than welcome. Thanks in advance, Marcos

  Read the article

• Routing and authenticating all access through squid

  - by Knight Samar

  Hi, I want to route all Internet access in my network through a Squid proxy server and authenticate and log all users. I want this to be a client-independent setting so that no one needs to do anything on their browsers or machines. I have set my network gateway as the proxy server so that all traffic will be sent to it. I have done this using options in DHCP server. Now I tried using squid as a transparent proxy, but then it won't authenticate in that mode. I tried using iptables to route all traffic to port 3128 but it won't popup the authentication dialog box from SQUID. I tried telling DHCP to give WPAD to all clients by placing a WPAD file on a webserver containing the following for automatic proxy configuration on clients: Changes in dhcpd.conf option wpad code 252 =test; option wpad "\n\000"; option wpad "http://192.168.1.5/wpad.dat\n"; The WPAD file: function FindProxyForURL(url,host) { return "PROXY squid-server-ip-address:3128 ; DIRECT "; } But the browsers (different versions of Firefox and IE) seem to ignore it. :( What should I do ?

  Read the article

• finding files that match a precise size: a multiple of 4096 bytes

  - by doub1ejack

  I have several drupal sites running on my local machine with WAMP installed (apache 2.2.17, php 5.3.4, and mysql 5.1.53). Whenever I try to visit the administrative page, the php process seems to die. From apache_error.log: [Fri Nov 09 10:43:26 2012] [notice] Parent: child process exited with status 255 -- Restarting. [Fri Nov 09 10:43:26 2012] [notice] Apache/2.2.17 (Win32) PHP/5.3.4 configured -- resuming normal operations [Fri Nov 09 10:43:26 2012] [notice] Server built: Oct 24 2010 13:33:15 [Fri Nov 09 10:43:26 2012] [notice] Parent: Created child process 9924 [Fri Nov 09 10:43:26 2012] [notice] Child 9924: Child process is running [Fri Nov 09 10:43:26 2012] [notice] Child 9924: Acquired the start mutex. [Fri Nov 09 10:43:26 2012] [notice] Child 9924: Starting 64 worker threads. [Fri Nov 09 10:43:26 2012] [notice] Child 9924: Starting thread to listen on port 80. Some research has led me to a php bug report on the '4096 byte bug'. I would like to see if I have any files whose filesize is a multiple of 4096 bytes, but I don't know how to do that. I have gitBash installed and can use most of the typical linux tools through that (find, grep, etc), but I'm not familiar enough with linux to figure it out on my own. Little help?

  Read the article

• Log connections to program

  - by Zac

  Besides for using iptables to log incoming connections.. Is there a way to log established inbound connections to a service that you don't have the source to (suppose the service doesn't log stuff like this on its own)? What I'm wanting to do is gather some information based on who's connecting to be able to tell things like what times of the day the service is being used the most, where in the world the main user base is, etc. I am aware I can use netstat and just hook it up to a cron script, but that might not be accurate, since the script could only run as frequently as a minute. Here is what I am thinking right now: Write a program that constantly polls netstat, looking for established connections that didn't appear in the previous poll. This idea seems like such a waste of cpu time though, since there may not be a new connection.. Write a wrapper program that accepts inbound connections on whatever port the service runs on, but then I wouldn't know how to pass that connection along to the real service. Edit: Just occurred to me that this question might be better for stackoverflow, though I am not certain. Sorry if this is the wrong place.

  Read the article

• Siege - running a stress test benchmark

  - by morgoth84

  I need to do a benchmark test of a HTTPS server using Siege, to see how it behaves under massive load. I'm initiating tests from another machine which is quite powerful and it is connected to the same physical switch the server is connected on. But when I initiate a test, I can't get it to make more than 170 requests per second. With this load the server's CPU usage is at 15-20% and the average response time for a request is approx. 0.03 seconds. Load of the client machine is approx. at 10%. So, I gradually increase the number of users in Siege (the number of worker threads) and request rate linearly increases up to 170 reqs/sec, but it never gets over it. No matter how many more worker threads I start, the load on the server is never more than 20% (and the client's load also doesn't increase any more). How can I overcome this? I've googled a bit and found out that after a request is completed, a socket associated with one ephermal port remains in WAIT_TIME state for some time during which it can't be reused. I tried to overcome this by doing these things: sysctl -w net.ipv4.ip_local_port_range="1024 65535" echo 1 > /proc/sys/net/ipv4/tcp_tw_recycle Oh, and the client machine is a Linux (RedHat, I think, but I'm not sure). Any help would be appreciated.

  Read the article

< Previous Page | 381 382 383 384 385 386 387 388 389 390 391 392  | Next Page >