Search Results

Search found 25182 results on 1008 pages for 'ask'.

Page 386/1008 | < Previous Page | 382 383 384 385 386 387 388 389 390 391 392 393  | Next Page >

  • Ubuntu 12.04 no network connection

    - by user115711
    I own a HP probook 4530s. I installed ubuntu 12.04 along side my windows 7 professional OS. While in window 7 everything works properly in terms of wire and wireless connection. On Ubuntu 12.04 my wired connection doesn't work at all and wireless connection works only when I check off enable wireless then recheck enable wireless. When I recheck enable wireless, the wireless connection only works for about 30 seconds then it goes offline again.

    Read the article

  • How do I configure wvdial to connect using a micromax 353g usb modem?

    - by user72209
    I have Micromax 353g usb modem . M using Ubuntu 11.04... I installed wvdail nd configured wvdial.conf as [Dialer Defaults] Init1 = ATZ Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 Init3 = ATS7=60 S30=0 S0=0 Init4 = AT+CGDCONT=1,"aircelgprs.pr" Password = Aircel Phone = *99***# Modem Type = USB Modem Stupid Mode = 1 Baud = 7200000 New PPD = yes Dial Attempts = 1 Modem = /dev/ttyUSB2 ISDN = 0 Username = aircel aftr commanding wvdial it says --> WvDial: Internet dialer version 1.61 --> Initializing modem. --> Sending: ATZ --> Sending: ATQ0 --> Re-Sending: ATZ --> Modem not responding. unable to connect plz help

    Read the article

  • Free space in tmpfs partition not adding up

    - by Dean Herbert
    I have had my /tmp/ partition filling up recently when it should not be anywhere near full. On further investigation, I found that the partition was listing free space a lot lower than it should be. I am guessing a remount will fix this, but am very curious as to why this has happened and where this space has gone. du output: root@odoroki:/tmp# du --summarize -h 3.3M . df output: root@odoroki:/tmp# df -h /tmp Filesystem Size Used Avail Use% Mounted on tmpfs 3.9G 3.3G 653M 84% /tmp Update: after deleting some files it has happened again. du output: root@odoroki:/tmp# du -h --summarize 11M . df output: root@odoroki:/tmp# df -h /tmp Filesystem Size Used Avail Use% Mounted on tmpfs 3.9G 3.9G 0 100% /tmp I have a feeling this has started since a recent apt-get upgrade, but it still seems like strange behaviour. I did do a quick scan over lsof output and couldn't see any open/stuck file handles. Unfortunately due to the seriousness of the issue I had to reboot the server, after which usage seems to match correctly.

    Read the article

  • How do I add English-UK thesaurus in LibreOffice?

    - by Chethan S.
    I have been trying to use English-UK thesaurus in LibreOffice but so far cannot get it to work. I have installed mythes-en-us as only it was available in repos. As suggested in some forums I searched for openoffice.org thesaurus, but again US version was available. As a result I can't enable thesaurus when I choose English UK: As instructed elsewhere I tried this: cd /usr/share/myspell/dicts sudo ln -s th_en_US_v2.dat th_en_GB_v2.dat sudo ln -s th_en_US_v2.idx th_en_GB_v2.idx Still the result is same as shown in above screenshots. What can be done now?

    Read the article

  • How do I get an Canon Pixma MP150 to print?

    - by Radu Erdei
    I succesfully installed my Canon Pixma MP150 printer (and scanner) in Ubuntu 12.04, made it the default printer, but i cannot print anything. Watching the printing queue, i see that the printer receives my documents but just for a few seconds after which the queue gets empty without anything getting actually printed. I tried to print from large pdf's to quite tiny txt files. I reinstalled the printer from cups web-based interface (127.0.0.1:631) but again, no luck. Any ideea on the matter?

    Read the article

  • sbackup: can not mount FTP automatically

    - by ledy
    In the sbackup configuration GUI i set the ftp://user:pw@online/storage and it's marked as successfully connected. After daily backup time, I checked the ftp and it was empty. In the error mail it says: Error in _do_mount: volume doesn't implement mount [ERROR_NOT_SUPPORTED - Operation not supported for the current backend.] Unable to mount: volume doesn't implement mount File access manager not initialized When restarting the sbackup GUI, it is no longer connected to the ftp and i have to click the button again to connect the remote directory - although it still knows my user/pw. How to save this permanently?

    Read the article

  • Ubuntu One Preferences does not show usage, name, e-mail, current plan

    - by Jim
    Ubuntuone is correctly synchronizing selected files between two computers running Ubuntu 10.10. When I open Ubuntuone Preferences, Account tab, on one computer it does not display the usage, name e-mail or current plan. On the other computer all information is shown correctly. On the Devices tab the 2 computers are not shown. They do show correctly on the other computer. Any ideas on how to fix this problem. I have reinstalled Ubuntuone per this link.

    Read the article

  • Which logfile(s) log(s) errors reading a cd?

    - by Robert Vila
    I introduce a CD-RW, maybe blank (I really don't know), and after a little movement inside the reader, the CD is ejected without any message at all. I would like to know what is going on and the reason why it is ejected. How can I know that in Natty. The CD reader is working OK because I can read other CD's. It only gave me problems writing from Natty, a few days ago, but with MacOS there was no problem. Thank you Edit: Maybe there is no error, but then, how can I know what is in the Cd if there is anything?

    Read the article

  • How can I initialize file names in the folders/ subfolders?

    - by user37991
    Sometimes Thunar allows 'camel-case' of file names, but only in the immediate folder, not the sub-folders. "Perl module to convert stringt to and from CamelCase" exists in Synaptic, but it is not powerful enough, or am I ignorant? The only way I can reliably do this is with Windows shareware (paid $$): Servant Salamander). That's why all my data & archives are on NTFS partitions. BTW: Synaptic has different entries for 'initialize' and 'initialise'. But I'll mention this in another question.

    Read the article

  • Network sharing for android

    - by Shagun
    I am on ubuntu 12.04 and I want to create a wifi hotspot to be used with my android device. Now I know there are so many tutorials available every where and that I have all options in network tab to use but I couldn't get it to work. Android does not work with an adhoc connection and whatever wifi network I created, my android device could not connect to it (I could connect a phone using bada to it and other computers can also be connected) I know the work around to get android on a adhoc connection but can't I have some thing as simple as connectify for windows? PS : I am not looking for workarounds involving android.

    Read the article

  • Windows 7 and Ubuntu Boot/Corruption Problems

    - by Kiraisuki
    I searched around, but I couldn't find the answer to why Windows 7 Ultimate 64x and Ubuntu 12.04 LTS 64x could'nt live together happily on my Asus G1s-X1 laptop. I had Windows 7 Ultimate 64x installed on the laptop when I bought it (bought it used, it comes with Vista new) and I wanted to try out Ubuntu and see what all the hype about the free OS was. I installed Ubuntu on an external 80GB iomega HDD with Windows 7 on my main drive. They both work fine for about 2-3 weeks, until Ubuntu suddenly is unable to boot. A few days after Ubuntu fails, Windows corrupts majorly (winload.exe, ntkrnlpa.exe, and various others corrupt randomly) and Windows Recovery Environment is completely useless. Booting to a live USB with Ubuntu and trying to reinstall it fails, and trying to wipe the main drive and install it there fails as well (something about my graphics card.) I managed to get Windows 7 Ultimate 64x back up and running (after many disk formats) but now I am left with a broken (and invisible) Ubuntu installation on the external drive. Is there any way to get the broken and non-bootable Ubuntu installation off the HDD without damaging or erasing the many files and programs installed and stored on the 80GB drive?

    Read the article

  • Custom keybindings without gnome-settings-daemon

    - by Carlito
    I am using Ubuntu 12.04 (Fallback) and I am trying to slim it down, mostly for fun/learning experience. I killed gnome-settings-daemon because I set up my theming from elsewhere. But now some of my keybindings are lost. I think the windowmanager ones are still working, like Alt-Tab and switch workspace. But my mediakeys to change volume and my custom keybindings are not working anymore. Is there a different way to save custom keybindings? Do I really need to run settings-manager to setup my keybindings?

    Read the article

  • No external microphone Acer AO722

    - by Leeghwater
    The ACER AO722 comes with an external mic input, and this input is not recognised by Alsa mixer or Sound (in System Settings). There are various comments on this problem, but no real solutions. For example External Mic not working but Internal Mic works on an Acer Aspiron AO722. Using the internal mic is not an option, as I need to use skype professionally. I have tried everything in alsamixer (accessible through the Terminal Ctrl+Alt+t, command: alsamixer), and in Sound (under System Settings). I have also installed Pulseaudio. But to no avail. The headset is working normally under Skype in Windows. My AO722 came with Windows 7 on it, so I have installed Skype there too. My headset has separate connectors for ears and mic, and these go into the respective output and input on the right side of the laptop. This location: http://bernaerts.dyndns.org/linux/202-ubuntu-acer-ao722 sounds like an effective solution but it is for Ubuntu Natty 11.04. The solution suggested sounds drastic to me: replace the kernel 2.6.38-13 with version 2.6.38-12. I use Ubuntu 12.04, and my kernel is 3.2.0-30-generic-pae. Question: could I try this solution with Ubuntu 12.04? Is this a risky thing to do? I have found harware work around this problem. The audio output seems to be a combi output with also a microphone connection. I have made an adapter for this output. I used a 4 contacts 3,5 mm audio jack plug. To this plug I have soldered 2 female (common stereo) connectors, one for ears and one for the mic of my headset. The 4 contacts jack, which goes into the laptop (in audio OUTput) is wired as follows: tip = hot audio right; first sleeve after tip = hot audio left; second sleeve = common earth (for both ears and microphone); the 3rd sleeve = microphone signal input. In the connector which I could buy, the 3rd sleeve is not so much a sleeve, but part of the metal base of the connector; normally you would expect this one to be connect to earth. But connecting the mic signal to it works. Maybe ready made adapters of this kind and even headsets with a combi jack can simply be purchased; I didn't check. When I plug in the 4 contacts jack, Sound and Alsamixer immediately recognise an external microphone (even if no mic is connected to the adapter). In Sound, under the Input tab, 'Settings for internal microphone' changes into 'Setting for microphone'. The microphone comes through loud and clear, however there is a constant noise in the background. Others have reported this too. If I disconnect the external mic from the adapter, or shortcircuit the external microphone, the noise gets less but does not disappear. Therefore, it is not background noise from the room, but it comes from the computer itself. However, if you talk directly in the microphone of the headset, the noise level is acceptable for VOIP. The headset of my mobile phone Nokia C1 mobile comes wwith a 4 contacts combi 3,5mm jack plug. However, this one works (ear and mic) with the AO722 only if not inserted fully. Possibly the wiring of this headset jack is different. I cannot find detailed specs of the AO722, and don't know whether the audio 'output' was actually designed as a combi input/output. I have seen that at least one other AO model has a combi connector only. In any case, I do not believe that connecting your headset in this way will harm your computer. I would still appreciate a software solution. This must be possible, because the proper microphone input connector works under MS Windows.

    Read the article

  • ACER Aspire V5-171 compatibility

    - by JamerTheProgrammer
    Im thinking about buying a V5-171 with an i3 in it. Im worried about secure boot though. I heard some people cant turn it off and it wont work... Im not shy to open it up and replace the hard drive with Ubuntu preinstalled. Im also worried about the wifi working. I have heard its been dropping out for people quite a bit along with also the trackpad not working. I dont mind replacing the wifi stick (if its even possible?) inside. Is the GPU (HD4000 i think) supported in ubuntu with full video accel? Thanks!

    Read the article

  • Laptop screen not detected but ubuntu working on other monitor

    - by Aymane El Baamri
    I have a laptop with with intel celeron inside 64 bit, the 64 bit amd ubuntu 11.10 is working on the laptop, just it wont detect the laptop screen but the same live usb worked on amd 64 pc, When i connected the desktop computer monitor to the laptop it worked perfectly with 1920x1080 screen, battery, WIFI. Im not sure if its cause i made the usb it with LiLo live usb creator on the desktop pc, should i remake the usb on the laptop?

    Read the article

  • Ubuntu Live USB: best practices for secure net traffic

    - by Och
    I want to to set up a live USB with Ubuntu, in the most secure way. So I want to have the persistent data on a second USB, something that its not that much problematic. How to configure a very safe Internet surfing (throughout a VPN?) Which are the best practices that could be implemented to have the Ubuntu live in a USB, the persistent data in other, and with the Internet access to a VPN (the Ubuntu privacy remix gives most of this, except the VPN config), Any ideas of how to combine the best of Ubuntu privacy remix, and Internet access to a VPN?

    Read the article

  • How to configure ubuntu ldap client to get password policies from server?

    - by Rafaeldv
    I have a ldap server on CentOS, 389-ds. I configured the client, ubuntu 12.04, to authenticate on that base and it works very well. But it don't gets the password policies from server. For example, if i set the policy to force user to change the password on first login, ubuntu ignores it and logs him in, always. How can i setup the client to get the policies? Here are the client files: /etc/nsswitch.conf passwd: files ldap group: files ldap shadow: files ldap hosts: files mdns4_minimal [NOTFOUND=return] dns mdns4 networks: files protocols: db files services: db files ethers: db files rpc: db files netgroup: nis sudoers: ldap files common-auth auth [success=2 default=ignore] pam_unix.so nullok_secure auth [success=1 default=ignore] pam_ldap.so use_first_pass auth requisite pam_deny.so auth required pam_permit.so auth optional pam_cap.so common-account account [success=2 new_authtok_reqd=done default=ignore] pam_unix.so account [success=1 default=ignore] pam_ldap.so account requisite pam_deny.so account required pam_permit.so common-password password requisite pam_cracklib.so retry=3 minlen=8 difok=3 password [success=2 default=ignore] pam_unix.so obscure use_authtok try_first_pass sha512 password [success=1 user_unknown=ignore default=die] pam_ldap.so use_authtok try_first_pass password requisite pam_deny.so password required pam_permit.so password optional pam_gnome_keyring.so common-session session [default=1] pam_permit.so session requisite pam_deny.so session required pam_permit.so session optional pam_umask.so session required pam_unix.so session optional pam_ldap.so session optional pam_ck_connector.so nox11 session optional pam_mkhomedir.so skel=/etc/skel umask=0022 /etc/ldap.conf base dc=a,dc=b,dc=c uri ldaps://a.b.c/ ldap_version 3 rootbinddn cn=directory manager pam_password md5 sudoers_base ou=SUDOers,dc=a,dc=b,dc=c pam_lookup_policy yes pam_check_host_attr yes nss_initgroups_ignoreusers avahi,avahi-autoipd,backup,bin,colord,daemon,games,gnats,hplip,irc,kernoops,libuuid,lightdm,list,lp,mail,man,messagebus,news,proxy,pulse,root,rtkit,saned,speech-dispatcher,sshd,sync,sys,syslog,usbmux,uucp,whoopsie,www-data /etc/ldap/ldap.conf BASE dc=a,dc=b,dc=c URI ldaps://a.b.c/ ssl on use_sasl no tls_checkpeer no sudoers_base ou=SUDOers,dc=a,dc=b,dc=c sudoers_debug 2 pam_lookup_policy yes pam_check_host_attr yes pam_lookup_policy yes pam_check_host_attr yes TLS_CACERT /etc/ssl/certs/ca-certificates.crt TLS_REQCERT never

    Read the article

  • Set Ctrl+Alt+T to open a maximized terminal

    - by queueoverflow
    I use the Ctrl+Alt+T shortcut to open a terminal, but I cannot see how I can get it maximized. When I start it manually, I can simply do a gnome-terminal --maximize, but that does not apply for the shortcut. Even a changing of the .desktop files did not change anything. Any way to let the shortcut open a maximized terminal window? I use regular Gnome 2 on Ubuntu 11.04 with no compositing effects.

    Read the article

  • Does dist-upgrade require PPA software to be uninstalled first?

    - by seb
    Hi all, I'm still running Ubuntu 10.04 with quite a few PPAs. Amongst the PPAs there is Guiodic (Guido Iodice) Lucid quasi-rolling :) PPA which brings most recent versions of many programs to my desktop. My steps: sudo update-manager -d click on upgrade on the appearing window wait for the magic to happen: prepare to upgrade and setting new software channels during 'calculating the changes' I will get the following error message in the panel An error occurred, please run Package Manager form the right-click menu or apt-get in a terminal to see what is wrong. The error message was: ' Error: Marking the upgrade (E:Error, pkgProblemResolver::Resolver generated breaks, this may be caused by help packages.)'This usually means that your installed packages have unmet dependencies When I check Synaptic/apt-get I can't find any errors or hint toward broken packages Could this error be because of many PPA versions being newer than 10.04 original versions?

    Read the article

  • Trying to setup a gateway via pppoe

    - by Bob
    I just installed Ubuntu 12.04 on a computer. I want to use this computer as a router for my other computers. The computer only has 1 network card, there is no slot for a second card. I can get the computer to connect to my ISP via pppoe and it can access the web. However the other computers on my local net can only see the router computer. I have tried 2 different pppoe packages, roaring penguin and network-manager-gnome. When I get it to work I will be replacing a 15 year old computer that is running Slackware 7.1. The old computer is currently my router. It is running Roaring Penguin I tried to setup the new computer with the same Roaring Penguin parameters as the old computer. Bob

    Read the article

  • "sudo apt -get install foo-" causes removing foo package and everything depends on it

    - by M.Elmi
    While working in command prompt, I accidentally typed following command: sudo apt-get install python3- and ubuntu started removing python3 and everything depends on it (including firefox and much more). Fortunately I closed that terminal immediately and reverted everything by checking dpkg log file, but I was wondering why an install command should act like remove? Is it a bug? Consider the situation that you are looking for a package name (pressing Tab twice) and going through possibilities by pressing Enter key and those Enter keys remain in the keyboard buffer and.... youhaaaa... apt-get is removing the entire installation in front of your eyes.

    Read the article

  • 12.04 - how to install alsa 1.0.27, to resolve dell sound card microphone echo issue to local speaker?

    - by YumYumYum
    Problem: Microphone in or Line in microphone audio is instantly captured and sinked to the local speaker, cause horrible echo problem About my system: (NO PulseAudio used (cause its always crash and unstable for my system/hardware, so auto killed and never used) I have ALSA 1.0.25 version running in Ubuntu 12.04 / 64-bit, with random kernel installed: kernel 3.5.0-17-generic kernel 3.8.x kernel 3.11.x But the echo problem is not resolved after trying all kernel. So, last option left now is to use ALSA 1.0.27 to see if that solves the problem. Is there any away to use ALSA 1.0.27 from any PPA to install in the Ubuntu 12.04? (without making it from source, to avoid breaking other packages and dependencies)

    Read the article

  • Nautilus tags/labels/marks/emblems for directories

    - by madox2
    Is there any way how to mark folders or files with tags(or labels or whatever) in Nautilus? It would be nice to sort marked folders or files through this tags. I am familiar with emblems but I cant sort through it and its complicated to assign emblem to folder(3 clicks at least). Especially my first idea was to mark folders in my Movie directory with tags seen, not seen, must see, and so on. Then I realized it would be useful in any other workspace with any custom tags... Is there any nautilus extension for this? Or any other file manager which can do this?

    Read the article

  • Eclipse colour scheme is terrible in Ubuntu

    - by cyberjar09
    I have modified my eclipse colour theme to my liking but just cant seem to develop in peace because I keep having to squint and stare at the screen for certain elements. The colour default scheme is simply pathetic! I have no idea what these elements are called and hence instead of attempting to describe them I have attached screenshots. How can I modify these elements to make them more humanly readable?

    Read the article

  • Ubuntu crashes with menu bar launcher freeze during software centre use

    - by UbunUser
    I recently reinstalled Ubuntu 12.04 LTS on a Dell Studio 1588 64-bit and ran into crashes as I was installing some software on the software centre. Before this, I had display/screen problems that I needed to fix so I will briefly describe that in case it has any connection to the crashes. The problem was of screen crash/flickering (related to ATI Mobility Radeon HD 5400x) when trying to adjust brightness and so I followed guidance from an earlier chain (question 131967) to (a) use jockey to install fglrx update driver (deactivate experimental beta driver) and (b) edit grub to add acpi_backlight=vendor dell_laptop.backlight=0 The crashes that happened (twice, while software centre was just finishing installation in the background) was that all tabs (on open Firefox window) stayed open along with cursor control with mousepad but all menu bars disappeared completely along with the launcher and the keyboard also turned unresponsive. So there seemed to be no way to close windows or shut down the computer except for a forced hard shut down of the system using the start button. This is very similar to Questions #167540 and #298843, which seem to be closed. Why is this happening? Is there some update or fix I need to make? Thanks!

    Read the article

< Previous Page | 382 383 384 385 386 387 388 389 390 391 392 393  | Next Page >