Search Results

Search found 13995 results on 560 pages for 'home'.

Page 386/560 | < Previous Page | 382 383 384 385 386 387 388 389 390 391 392 393  | Next Page >

• Sharing VPN access between two computers on the LAN

  - by Axelle Ziegler

  I have VPN access to several machines in my office from my home machine. I'd like to be able to access those machines from another computer on my LAN, without setuping a second VPN access. Both computers are Windows 7 machines. Is there a way for my "main" computer to share its VPN access to another machine on the LAN? How would one setup this share? I don't think "simple" Internet connection sharing fits my needs because: My LAN already has its own DHCP/Router to access the Internet, and I'd like to keep it this way I can't access the Internet through my VPN connection

  Read the article

• Crackling sound from microphone recently, in 13.04

  - by Patrig Droumaguet

  I use 13.04 since the release and I use Skype which was working well. But recently I've had remarks saying my voice was "crackling", even if the voice from my interlocutor was perfect. Making a test with Audacity and Cheese, I've seen that every recorded sound (with the front microphone of my laptop or a jack microphone) was crackling. It's not really like saturating, the sound has a lot of annoying pops. I've tried to check the settings, they were still on PulseAudio. I've even tried the extreme solution : re-installing Ubuntu (because initially it was working)… with the same problem. If I boot on Windows (dual-boot) I have no problem (so it's not physical). If anyone could help :) My laptop is a HP dv6-6165sf. The sound card is a "IDT 92HD81B1X5" (with BeatsAudio). Thanks a lot ! New tests - july 6th Hi again, I've tried editing /etc/pulse/default.pa with these three settings : load-module module-udev-detect use_ucm=0 tsched=0 load-module module-udev-detect tsched=0 load-module module-udev-detect use_ucm=0 The three of them don't change anything, except the last one (which was by default) which makes Audacity record without any crackling sound. But in Skype, Cheese and Kazam, the sound is crackling… I've installed again Ubuntu 13.04 (from scratch, deleting everything from /home), and I've updated it. The microphone is still cracking. Thanks for your help !

  Read the article

• how do I create a bidirectional bridge using iptables

  - by Kolzoi

  Setup: I have a samsung LCD TV that is connected via eth0 to a T41 Thinkpad running Ubuntu 10.10 which is wirelessly connected to the home router. I am trying to get Samsung's remote control app working on my iPad but the app won't allow me to put in an ip address and only discovers the tv if it's on the same subnet as the iPad (lame). So I need the laptop to route packets from eth0 to the wireless interface (wlan0), and I need about 3 ports on the wlan0 interface to be forwarded to the samsung tv. Hopefully all this makes sense. I've been messing around with iptables and samsung is now able to access internet via laptop wireless, but mapping from wlan0 back to the samsung tv is eluding me.

  Read the article

• Is there any way to enable remote desktop with a password without setting a password on the os?

  - by Coder

  I'm running Windows 7 and would like to use remote desktop to connect to my home computer. As such i want to enable password security for remote desktop, but I do not want to have to enter a password to log into my computer if i'm physically at my computer. Is there any way to do this? I am an administrator user and I want to have the same icons and configuration regardless of if i log in remotely or locally but i want only the remote connection to require a password. I read about being able to do something similar by adding another user account, but is there any way to do it so that the same icons and settings take affect regardless of how i log in? Thanks.

  Read the article

• Network printer problem with 12.04

  - by G. He

  I had an HP LaserJet 3030 printer connected to an Ubuntu box. It worked fine with 11.10. I was able to print from Ubuntu as well as from Windows and Mac from the home network. About a month or so ago, I upgraded 11.10 to 12.04, then things started to falling apart. My Windows 7 laptop couldn't print to the printer any more. Today, I installed many updates on 12.04, hoping that would fix the printing problem. Unfortunately, it made the situation much worse. Now not only my Windows 7 laptop won't print, my XP desktop won't print either. Every time I print something from the Windows computer, the Ubuntu box logs an error message in /var/log/samba/log.'machineName' as: _spoolss_OpenPrinterEx: Cannot open a printer handle for printer \\server. It is interesting that it uses the server name as the printer, not the \\server\xyzprinter as the printer name. Anyone had a similar problem? Anyway to work around the problem?

  Read the article

• trouble loggin into a Mac share from a Windows PC on the network

  - by villares

  I have this mixed network and usually log into the Macs from the Windows XP home machines and vice versa. I have no real networking knowledge, things just seem to work, more or less, with the default settings. Now I've got a new Snow Leopard Mac with a shared folder (added the user names of the Windows users at the sharing preferences) and the trouble is some machines can open the share and others can't. I can't see the difference. It feels like some Windows machines have a "cache" and won't ask for the share password, just deny access. I can also see old shares proposed at the Windows "add network place wizard".

  Read the article

• Kubuntu 11.10 Lot of Networking problems

  - by Cobraone

  Since I upgrade to 11.10 I have a lot of problems with KDE. First of all there are problems in configuring a static IP address. Just to explain @home I have a normal fiber ADSL and I use a DHCP. When I go to a customer I must insert a static IP address. With ifconfig everything seems ok but there is something wrong in searching DNS names. (I have installed Ubuntu and was going ok again). Now I Have reinstalled again Kubuntu 11.10 and I have the same problem in addition today I have discovered that if I connect to a network in another customer office the desktop freezes and I could only switch between windows with alt+tab. No FN key or right click to open run command works. So i unplugged network (configuration is just DHCP here) and tried on another position in office. It was the same. My Laptop freezes when connected, a fedora 14 of a friend works. So I decided to connect my Galaxy S II as USB network device. Everything is ok for like 3 minutes. When I noticed a little loss of signal again the desktop freezes and i must work (like now) just switching between windows with alt+tab). Additional information: Unplugging network or restarting it via Konsole does not not solve the freezing problem. Every time I must open a console and reboot. Any idea of what tests to do ? Just a recommendation: If I must post here logs or something else please guide me. I use Linux since Ubuntu 9 but I am not an "expert".

  Read the article

• Blackberry keeps sending notifications of FB and emails [closed]

  - by tfalise

  Here is the problem I got with my blackberry : I have received and sent multiple mails this week-end from my home computer. As usual, I received the notifications of sent and received emails on my blackberry, and archived / deleted them. But, I still receive the notifications of new mails several times a day, for emails I already have deleted in my Gmail account. I tried rebooting the blackberry (alt+shift+del) and removing the battery, but nothing helps, the notifications are sent and re-sent, no matter what I do. Anyone has an advice on how to stop this spam, as it is becoming very annoying ?

  Read the article

• DNS Problem in my notebook [closed]

  - by user20989

  i have windows 2003 server domain environment in my office. my server ip is: 192.168.1.2 if i put this IP in DNS of my laptop network card my folder SYNC works fine & also internet work fine in office. but internet did't work in my home for that i need to change DNS again to Auto & internet start working again. its too difficult to change cause some time i don't have administrative password. is there any solution to that? Thanks

  Read the article

• Quitting a small start-up where you are a primary developer?

  - by programmx10

  Just curious to hear from other people who may have been in similar situations. I work for a small startup (very small) where I am the main developer for a major part of the app they are building, the other dev they have does a different area of work than I do so couldn't take over my part. I've been with the company 5 months, or so, but I am looking at going to a more stable company soon because its just getting to be too much stress, overtime, pressure, etc for too little benefit and I miss working with other developers who can help out on a project. The guy is happy with my work and I think I've helped them get pretty far but I've realized I just don't like being this much "on the edge" as its hard to tell what the direction of the company is going to be since its so new. Also, even though I'm the main dev for the project, I would still only consider myself a mid-level dev and am selling myself as such for the new job search. Just to add more detail, I'm not a partner or anything in the company and this was never discussed, so I just work on a W2 (with no benefits of course). I work at home so that makes it easier to leave, I guess, but I don't want to just screw the guy over but also don't want to be tied in for too long. Obviously I would plan to give 2 weeks notice at least, but should I give more? How should I bring up the subject because I know its going to be a touchy thing to bring up. Any advice is appreciated UPDATE: Thanks everyone for posting on this, I have now just completed the process of accepting an offer with a larger company and quitting the startup. I have given 2 weeks notice and have offered to make myself available after that if needed, basically its a really small company at this point so it would only be 1 dev that I would have to deal with... anyways, it looks like it may work out well as far as me maintaining a good relationship with the founder for future work together, I made it out to be more of a personal / lifestyle issue than about their flaws / shortcomings which definitely seems to help in leaving on a good note

  Read the article

• Remote Desktop Solution without VPN, with locked PC

  - by ujjain

  Sometimes I work from home and I use either of these 2 methods: Teamviewer VPN + Remote desktop When I connect with VPN I am however unable to browse any websites on my own computer, which can be very inconvenient when I am basically waiting an hour for somebody else to finish his job to do a 5 minute job. It would be nice if I could still continue browsing. A solution for this is Teamviewer. With Teamviewer I can manage the other computer, without suffering the restrictions of using the VPN. Everybody in the working area however, can see me using my computer remotely and this is not a good situation either, especially during work hours. I would like a solution that allows me to continue browsing normally and still control my remote workstation, without other people seeing every move I make on the workstation.

  Read the article

• Script to run chown on all folders and setting the owner as the folder name minus the trailing /

  - by Shikoki

  Some numpty ran chown -R username. in the /home folder on our webserver thinking he was in the desired folder. Needless to say the server is throwing a lot of wobbelys. We have over 200 websites and I don't want to chown them all individually so I'm trying to make a script that will change the owner of all the folders to the folder name, without the trailing /. This is all I have so far, once I can remove the / it will be fine, but I'd also like to check if the file contains a . in it, and if it doesn't then run the command, otherwise go to the next one. #!/bin/bash for f in * do test=$f; #manipluate the test variable chown -R $test $f done Any help would be great! Thanks in advance!

  Read the article

• Installation on SSD with Windows preinstalled

  - by ebbot

  I bought a laptop with this fancy SSD drive, fancy new UEFI aso. I figured at first Windows out Ubuntu in but after doing 3 DoA on 3 laptops in one day I realized that maybe keeping Windows could come in handy. So dual boot it is. And this is what I've got: Disk 1 - 500 Gb HD 300 Mb Windoze only says "Healthy" don't know what it's for. 600 Mb "Healthy (EFI partition)" 186.30 Gb NTFS "OS (C:)" "Healthy (Boot, Page File, Crash Dump, Primary Partition)" 258.45 Gb NTFS "Data (D:)" "Healthy" 20.00 Gb "Healthy (Recovery Partition)" Disk 2 - 24 Gb SSD 4.00 Gb "Healthy (OEM Partition)" 18.36 Gb "Healthy (Primary Partition)" So I'm not sure what the first partition on each drive does (the 300 Gb on the HD and the OEM Partition on the SSD. Nor do I know what Data (D:). I think the 2nd partition on the SSD is for some speedup of Windoze. I'm debating if I should shrink the OS (C:) drive to around 120 GB or so. Clear the Data (D:) and also use the whole SSD for Ubuntu. That would leave me 24 Gb for e.g. / on the SSD and some 320 Gb on the HD for /home and swap. Is this a reasonable setup? Do I need to configure fstab for the SSD differently to a HD?

  Read the article

• How can I restore GRUB without a live CD?

  - by Looterguf

  I realize that this is a duplicate of a question asked before, but in that question the asker managed to find his live CD and no real answer appeared, thus I am re-asking it. I managed to screw up my GRUB by deleting two linux partitions on my hard drive from windows. After this, GRUB gives the error "partition not found", and gives me the grub-rescue prompt. The only command I have found to work in this is 'ls', which spits out my partitions. I would use the live CD fix, but I am in India, and all my live CDs are back home in the US... What I've got is an internet connection, a 4GB flash drive with Flow OS installed (which I am currently using but can wipe if need be), and a working laptop that I can borrow. What should I do?

  Read the article

• insert, delete etc. keys not working on Cherry Strait keyboard

  - by Brabster

  Hey folks, I got a Cherry Strait USB wired keyboard for xmas and I've been unable to get several keys working under Ubuntu 10.10 or Win XP. There are a few keys. including the Print Screen key, insert, end, delete, pg up, pg down and home. I've not been able to identify any others that aren't working. I'm not sure as to the best approach to determine what's wrong. Is there any way to confirm whether there is any output from the keyboard in response to pressing those keys, ideally in Ubuntu as that's where I spend most of my time so that I know if it's a fault with the device itself? (I've tried different USB ports and also hitting those keys whilst in the Keyboard Shortcuts app, no response to these keys)

  Read the article

• ssh rsa keys expires after 5 years

  - by Kreker

  I'm using an old login with ssh-rsa public/private key and all was good. I noticed that a couple of days ago the authorizazion was avoid with message "server refused our keys". After diggin' I figured out that the couple of keys stop working after exactly 5 years of their creation. So I make a new pair of keys, take the public one, paste inside a file in ~/.ssh of the username that I'm using, converted it with ssh-keygen -if and paste the new file into authorized_keys but the I still get "server refused our key". It's ok to copy and paste the real key without transfer it? What I'm missing? This isn't my first time using a pair of keys and I follow the same procedure as described. I'm in doubt if I'm changing the correct authorized_keys file but I've take a look in /etc/passwd and see where is the home of the login which I'm using.

  Read the article

• Slightly off topic - How to Fix Sky Go Error [t6013-c1501] (and [t6000-c1501])

  - by bconlon

  Sky doesn't seem to understand what their own errors mean, so I cobbled together an understanding from some other posts and managed to get it working.When you see the error [t6013-c1501] instead of your TV programme in Sky Go, it seems to mean:'You registered a device, but then changed the hardware, so now I'm confused!'In other words, the Digital rights management (DRM) used between Sky Go and Silverlight stored an old fingerprint of your PC, but rather than recognising this and allowing you to remove the device, it just disappears from the 'Manage Devices' page.DISCLAIMER: Perform the following steps at your own risk. It worked for me, but I didn't care if it broke stuff. If you care....don't do it!So, to fix this I did the following:1. Login to Sky Go and click 'Watch live TV' from the home page. It will attempt to show Sky News and fail with the error [t6013-c1501].2. Right click on the error and you should see the Menu option 'Silverlight'. Select this and a dialog should appear. Click the 'Application Storage' tab and delete any entry that relates to sky go. Clcik OK to close the dialog.3. Open explorer and navigate to the folder C:\ProgramData\Microsoft\PlayReady4. Rename the file mspr.hds to mspr.hds.OLD5. Go back to the browser and click F5. You may need to logout/login (not sure).Note: Don't rename/delete the folder C:\ProgramData\Microsoft\PlayReady or you will get the error [t6000-c1501]. The folder must exist in order for the new file to be created by Silverlight. Techie talk:So whoever wrote the code to create a new mspr.hds file didn't write code to check the folder existed causing what I assume is a generic error t6000, probably something like:catch (Exception ex) { WriteToLog("Oops, something broke!"); }#

  Read the article

• How can I mount an image from an external HDD to a partition within the host system?

  - by HardwareMuch

  I'm currently using Acronis True Image Home 2010 and I have created an image of my Windows 7 OS. I copied it to my external HDD and I repartitioned my other PC's HDD. The primary partition houses the Windows Xp system which also has Acronis installed. The new partition is logical. Whenever I try to go through the steps on "Clone Disk" the program would not let me select a destination drive if I choose the external HDD as the source. I also did not know that it you can only select disks instead of partitions as a source or destination. Any suggestions would be greatly appreciated. Thanks.

  Read the article

• How to Extending a logical volume in WMWare

  - by Mercer

  down vote favorite i have a CentOS 6.3 into my Virtual Machine. I have 2 Disk: Disk#1 = 18G Disk#2 = 20G [root@vm ~]# df -h Filesystem Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg_system-lv_root 1008M 250M 708M 27% / tmpfs 1.9G 0 1.9G 0% /dev/shm /dev/sda1 194M 31M 154M 17% /boot /dev/mapper/vg_system-lv_home 504M 17M 462M 4% /home /dev/mapper/vg_system-lv_opt 2.0G 68M 1.9G 4% /opt /dev/mapper/vg_produits-lv_grid 6.9G 2.5G 4.1G 38% /opt/grid /dev/mapper/vg_produits-lv_oracle 6.9G 144M 6.4G 3% /opt/oracle /dev/mapper/vg_system-lv_tmp 2.8G 71M 2.6G 3% /tmp /dev/mapper/vg_system-lv_usr 2.5G 1.6G 799M 67% /usr /dev/mapper/vg_system-lv_var 2.0G 278M 1.6G 15% /var So i want to extend my /tmp and my /opt/oracle like this: 10Go in/tmp 13Go in /opt/oracle Thx.

  Read the article

• Accessing localhost (xampp) from another computer over LAN network - how to?

  - by vr3690

  I have just set up a wi-fi network at home. I have all my files on my desktop computer (192.168.1.56) and want to access localhost over there from another computer (192.168.1.2). On my desktop I can access localhost through the normal http://localhost. Apache is running on port 80 as usual. Exactly what do I have to do to achieve this? There is documentation on the net but they either don't work or are too fragment and confusing to understand. I think I have to make changes to my apache's httpd.conf file and the hosts file. Any ideas as to what changes to make?

  Read the article

• WiFi problems on several Ubuntu installations

  - by Rickyfresh

  Okay this is the first time I have ever had to ask a question as usually the Ubuntu community have answered everything already but on this occasion there are many people asking for the answer but not one good solution has become available so far so someone please help or I will have to install Windows on my sons and my girlfriends PCs and that would be a disaster as I am trying to help convince people to move from Windows. I installed 12.04 on three computers on the same day. Dell Inspiron (Works Perfect) Toshiba Satellite Home built Desktop The Dell works perfect but the other two either keep losing connection to the wireless Internet and even when they are connected they stop connecting to web sites, for some reason it searches Google fine but will not connect to web sites when a link is clicked. So far people have recommended in other forums: Removing network manager and installing wicd (didn't solve it) Changing the MTU in the wireless settings (didn't solve it) All sorts of messing about with Firefox settings (this doesn't solve it and even if it did this would leave most average PC users scratching their heads and wishing they had stuck to windows) The problem exists on two very different machines and different wireless cards so I doubt its a driver or hardware issue, also many other Ubuntu users are having the same problem with a vast array of different machines and wireless cards. Can someone please give a good solution to this as its going to turn a lot of people away from Ubuntu if they cannot get this sorted. I would give some PC specs but the two machines are vastly different and the other people complaining of this problem also have very different systems all showing the same problem.

  Read the article

• Execute script before shutting down in Ubuntu

  - by juanefren

  When I shut down my computer I want to show some pending tasks that I have to do before leaving the office... I did a local application to manage those tasks, so basically I just want to run a command, and shut down after I kill the app executed. I have already tried with these options: * /etc/gdm/PostSession/Default -- this works only when I select LogOut option instead Shutdown. * /etc/rc0.d/K01mycustomscript -- execute script after X is killed * $HOME/.bash_logout -- This looks like does nothing. * ./app-to-run && sudo shutdown -h now -- Don't like it for 2 reasons, prompts for sudo password, and can't use my laptop shutdown button. I am using Ubuntu 10.04

  Read the article

• How can I make my PHP development environment more efficient?

  - by pixel

  I want to start a home-brew pet project in PHP. I've spent some time in my life developing in PHP and I've always felt it was hard to organize the development environment efficiently. In my previous PHP work, I've used a windows desktop machine and a linux server for development. This configuration had it's advantages: it's easy to configure Apache (and it's modules)/PHP/MySql on a linux box, and, at the time, this configuration was the same like on production server. However, I never successfully set up a debug connection between my Eclipse install and X-debug on server. Transferring files from my local workspace to the server was also very annoying (either ftp or Bazaar script moving files from repository to web root). For my new setup, I'm considering installing everything on my local machine. I'm afraid that it will slow down workstation performance (LAMP + Eclipse), and that compatibility problems will kick-in. What would you recommend? Should I develop using two separate machines? On one? Do you have experience using one of above configurations in your work?

  Read the article

• Configure browser and VPN traffic

  - by Zachzor

  Hello everyone. I've been having a few issues with my company's VPN server. The VPN is running on a Mac Server (10.6.x) and I'm also using a Macbook (10.6.5). I've been building specific programs to gather information from IPs, and to work on this while I'm at home I need to go through our VPN to access the network. Unless I send all traffic over VPN, I'm not able to hit those specific IPs. However, I'm unable to access the internet through my web browser when I send all my traffic over VPN. I was wondering if there was a way (besides setting up a split tunnel) that I could set up a web browser to go through my current wireless connection, as opposed to going through the VPN like the rest of my applications. Wether the browser be Chrome, Firefox, or Safari doesn't matter to me. Anyone else run into this issue and find a clever way to solve it? Thank you!

  Read the article

• Use a media player in Linux just to play files from an iPod device (no sync, no manage, just play)?

  - by Somebody still uses you MS-DOS

  I have an ipod classic 160gb, that I sync with my machine at home. I use Linux at work, and want to just plug my ipod and just listen to the tracks, with all the playlists and such. I don't want to sync nothing, I just want to listen to the tracks as if I was using the ipod itself. Why? Because this way I can use the usb port. So, I don't want to manage my ipod in Linux, I just want to listen to the tracks on it in Linux, like it was a local library but it's instead in my ipod. (I've tried gtkpod, it works to show my files, but I can't play, shuffle, etc. It would be interesting to have a complete audio software to handle everything like it was a local library)

  Read the article

< Previous Page | 382 383 384 385 386 387 388 389 390 391 392 393  | Next Page >