Search Results

Search found 11197 results on 448 pages for 'related'.

Page 387/448 | < Previous Page | 383 384 385 386 387 388 389 390 391 392 393 394  | Next Page >

• Access denied error while mounting a shared folder?

  - by SSH

  I am a linux newbie and I have a very basic question. I have three machines - machineA 10.108.24.132 machineB 10.108.24.133 machineC 10.108.24.134 and all those machines have Ubuntu 12.04 installed in it and I have root access to all those three machines. Now I am supposed to do below things in my above machines - Create mount point /opt/exhibitor/conf Mount the directory in all servers. sudo mount <NFS-SERVER>:/opt/exhibitor/conf /opt/exhibitor/conf/ I have already created /opt/exhibitor/conf directory in all those three machines as mentioned above. Now I am trying to create a Mount Point on all those three machines. So I followed the below process - Install NFS support files and NFS kernel server in all the above three machines $ sudo apt-get install nfs-common nfs-kernel-server Create the shared directory in all the above three machines $ mkdir /opt/exhibitor/conf/ Edited the /etc/exports and added the entry like this in all the above three machines - # /etc/exports: the access control list for filesystems which may be exported # to NFS clients. See exports(5). # # Example for NFSv2 and NFSv3: # /srv/homes hostname1(rw,sync,no_subtree_check) hostname2(ro,sync,no_subtree_check) # # Example for NFSv4: # /srv/nfs4 gss/krb5i(rw,sync,fsid=0,crossmnt,no_subtree_check) # /srv/nfs4/homes gss/krb5i(rw,sync,no_subtree_check) # /opt/exhibitor/conf/ 10.108.24.*(rw) Run exportfs in all the above three machines root@machineA:/# exportfs -rv exportfs: /etc/exports [1]: Neither 'subtree_check' or 'no_subtree_check' specified for export "10.108.24.*:/opt/exhibitor/conf/". Assuming default behaviour ('no_subtree_check'). NOTE: this default has changed since nfs-utils version 1.0.x exporting 10.108.24.*:/opt/exhibitor/conf Now I did showmount on machineA root@machineA:/# showmount -e 10.108.24.132 Export list for 10.108.24.132: /opt/exhibitor/conf 10.108.24.* And also I have started the NFS server like this in all the above three machines - sudo /etc/init.d/nfs-kernel-server start And now when I did this, I am getting an error - root@machineA:/# sudo mount -t nfs 10.108.24.132:/opt/exhibitor/conf /opt/exhibitor/conf/ mount.nfs: access denied by server while mounting 10.108.24.132:/opt/exhibitor/conf I have also tried doing the same thing from machineB and machineC as well and still I get the same error- root@machineB:/# sudo mount -t nfs 10.108.24.132:/opt/exhibitor/conf /opt/exhibitor/conf/ root@machineC:/# sudo mount -t nfs 10.108.24.132:/opt/exhibitor/conf /opt/exhibitor/conf/ Did my /etc/exports file looks good? As I have the same content in all the three machines. And also are there any logs related to NFS which I can see to find any clues? Any idea what wrong I am doing here? UPDATE:- So my etc/exports files would be like this in all the three machines - # /etc/exports: the access control list for filesystems which may be exported # to NFS clients. See exports(5). # # Example for NFSv2 and NFSv3: # /srv/homes hostname1(rw,sync,no_subtree_check) hostname2(ro,sync,no_subtree_check) # # Example for NFSv4: # /srv/nfs4 gss/krb5i(rw,sync,fsid=0,crossmnt,no_subtree_check) # /srv/nfs4/homes gss/krb5i(rw,sync,no_subtree_check) # /opt/exhibitor/conf/ 10.108.24.132(rw) /opt/exhibitor/conf/ 10.108.24.133(rw) /opt/exhibitor/conf/ 10.108.24.134(rw) Just a quick check - The IP Address that I am taking for each machine as mentioned above is like this - root@machineB:/# ifconfig eth0 Link encap:Ethernet HWaddr 00:50:56:ad:5b:a7 inet addr:10.108.24.133 Bcast:10.108.27.255 Mask:255.255.252.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5696812 errors:0 dropped:12462 overruns:0 frame:0 TX packets:5083427 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:7904369145 (7.9 GB) TX bytes:601844910 (601.8 MB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:187144 errors:0 dropped:0 overruns:0 frame:0 TX packets:187144 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:24012302 (24.0 MB) TX bytes:24012302 (24.0 MB) Here the IP Address that I am taking for machineB is 10.108.24.133.

  Read the article

• Give a session on C++ AMP – here is how

  - by Daniel Moth

  Ever since presenting on C++ AMP at the AMD Fusion conference in June, then the Gamefest conference in August, and the BUILD conference in September, I've had numerous requests about my material from folks that want to re-deliver the same session. The C++ AMP session I put together has evolved over the 3 presentations to its final form that I used at BUILD, so that is the one I recommend you base yours on. Please get the slides and the recording from channel9 (I'll refer to slide numbers below). This is how I've been presenting the C++ AMP session: Context (slide 3, 04:18-08:18) Start with a demo, on my dual-GPU machine. I've been using the N-Body sample (for VS 11 Developer Preview). (slide 4) Use an nvidia slide that has additional examples of performance improvements that customers enjoy with heterogeneous computing. (slide 5) Talk a bit about the differences today between CPU and GPU hardware, leading to the fact that these will continue to co-exist and that GPUs are great for data parallel algorithms, but not much else today. One is a jack of all trades and the other is a number cruncher. (slide 6) Use the APU example from amd, as one indication that the hardware space is still in motion, emphasizing that the C++ AMP solution is a data parallel API, not a GPU API. It has a future proof design for hardware we have yet to see. (slide 7) Provide more meta-data, as blogged about when I first introduced C++ AMP. Code (slide 9-11) Introduce C++ AMP coding with a simplistic array-addition algorithm – the slides speak for themselves. (slide 12-13) index<N>, extent<N>, and grid<N>. (Slide 14-16) array<T,N>, array_view<T,N> and comparison between them. (Slide 17) parallel_for_each. (slide 18, 21) restrict. (slide 19-20) actual restrictions of restrict(direct3d) – the slides speak for themselves. (slide 22) bring it altogether with a matrix multiplication example. (slide 23-24) accelerator, and accelerator_view. (slide 26-29) Introduce tiling incl. tiled matrix multiplication [tiling probably deserves a whole session instead of 6 minutes!]. IDE (slide 34,37) Briefly touch on the concurrency visualizer. It supports GPU profiling, but enhancements specific to C++ AMP we hope will come at the Beta timeframe, which is when I'll be spending more time talking about it. (slide 35-36, 51:54-59:16) Demonstrate the GPU debugging experience in VS 11. Summary (slide 39) Re-iterate some of the points of slide 7, and add the point that the C++ AMP spec will be open for other compiler vendors to implement, even on other platforms (in fact, Microsoft is actively working on that). (slide 40) Links to content – see slide – including where all your questions should go: http://social.msdn.microsoft.com/Forums/en/parallelcppnative/threads.   "But I don't have time for a full blown session, I only need 2 (or just 1, or 3) C++ AMP slides to use in my session on related topic X" If all you want is a small number of slides, you can take some from the session above and customize them. But because I am so nice, I have created some slides for you, including talking points in the notes section. Download them here. Comments about this post by Daniel Moth welcome at the original blog.

  Read the article

• OPN Specialized Latest News (15th November)

  - by swalker

  HELPING YOU TO SPECIALIZE WebCenter Implementation Specialist Exam Preparation Webcasts: WebCenter Content And WebCenter Portal Oracle Partner Network would like to invite you to Refresh Courses for WebCenter Content and WebCenter Portal, to help partners to prepare for the WebCenter Implementation Specialist EXAMS. This is a 3 hours intensive refresher partner-only training session, providing attendees with an overview of WebCenter Content and WebCenter Portal functions and related topics. After the refresher part you will be able to take the relevant Implementation Specialist EXAM depending on your personal focus. NOTE: This is only suitable for experienced WebCenter Content or WebCenter Portal practitioners Who should attend? Partner Consultants who want to become an Oracle WebCenter Content or a WebCenter Portal Certified Implementation Specialist or both, that will help them to differentiate themselves in front of customers and support their Companies to become Specialized. Webcast Details: Click here to read more... Specialized Partners Only! New Service to Promote Your Events The Partner Event Publisher has just been made available to all specialized partners in EMEA.  Partners now have the opportunity to publish their events to the Oracle.com/events site and spread the word on their upcoming live in-person and/or live webcast events. Click here to read more information and watch a short video demo. VADs Get Specialized Effective November 1, 2011 , VADs, with a valid Value Added Distributor Agreement will no longer be required to meet customer reference requirements outlined in the business criteria section in order to become specialized. VADs must continue meet all other business and competency criteria set forth in the applicable Knowledge Zone prior to specialization approval. New Certification Pillar Axiom 600 Storage System Your opportunity to take the Pillar Axiom 600 Storage System Essentials (1Z0-581) Exam is vailable now in beta. Pass the exam so you can become a Pillar Axiom 600 Storage Systems Implementation Specialist! Free vouchers are available for Oracle Partners! If you would like to receive a free Beta exam voucher, please send your request to [email protected] and include your name, business email address, company, and the Exam name Pillar Axiom 600 Storage System Essentials Beta exam. New Certification Available: Oracle Utilities Customer Care and Billing Oracle Utilities Customer Care and Billing 2 Essentials (1Z0-562) is a solution designed to help you meet market windows and regulatory deadlines while enjoying a low total cost of ownership and a high return on investment. Take the exam now to become an  Oracle Utilities Customer Care and Billing 2 Essentials Implementation Specialists. MEASURING YOUR SUCCESS We had 1674 Specialized Partners covering 5364 Specializations. Please note that due to OPN contract renewals at any given point in time there are valid Specialized Partners and Specializations which are temporarily not captured in the total statistics. An incremental 1961 individuals were accredited as Implementation Specialists giving an EMEA cumulative total of 9598 Implementation Specialists 26 ISVs obtained one or more Ready's, for a total of 53 Ready's Don't forget! You can submit your own press releases to Oracle! Every time you achieve specialization we'd like to support you getting the message out! Press guidelines and a submission link can be found on the OPN Portal here.

  Read the article

• Attending a Career Fair: &ldquo;Don&rsquo;t be shy &ndash; Be prepared&rdquo;

  - by jessica.ebbelaar

  There are a large number of ways to interact with companies nowadays. The career fair is a very effective and personal way to interact with a number of different companies in a very short period of time. Here are some simple tips to help you perform during a career fair. Do research The key to being successful at a career fair is to do research before you go. Make a first selection of the companies you feel could be interesting for you. Include many types of employers. Once you have decided on the list of companies you want to visit, go to their career portal. Inform yourself about what the company does, i.e what roles there are available, how the company culture is described, what impression the testimonials give you. The question that you still have after reviewing this information, are the ones you can discuss with the company on the fair. Sell yourself Visit the companies you have on your top 5 list first, so you will be at your highest energy level to make that first impression. Think in advance about what you are going to tell the recruiter. Prepare a 30-second introduction (including degree, strengths, skills & experience) Be confident when you talk about your experience. Remember to start the conversation with a smile, make good eye contact and give a firm handshake. You could be speaking to your next manager, so be professional! If you already know what jobs you are interested in, relate your skills and experience to the roles that the company has available. If you are not yet sure gather as much information as you can about employment and/or hiring procedures, specific skills necessary for different jobs, training and career paths. Stand out As career fairs are very crowded and the attending companies meet with a lot of potential candidates on one day, you have to make sure you are noticed in a positive way. A good preparation and asking questions that show you have a good understanding of the industry, organization and roles will help you. Be aware of time demands on employers. Do not monopolize an employer's time. Dress appropriately to make a good first impression. Bring your resume Do not forget to bring your resume in print or on a USB-stick to the fair. If you are searching for different types of jobs, bring different versions of your resume. Your resume should be short and professional on white paper that is free of graphics or fancy print styles and containing larger margins for interviewer notes. Follow up After each conversation ask who you can contact for follow-up discussions about the specific roles. Use the back of a business card to record notes that help you remember important details and follow-up instructions. If no card is available, record the contact information and your comments in your notepad or phone. Last but not least, thank everyone you talk to for their time. Follow up as soon as possible with thank you notes that address the companies’ hiring needs, your qualifications, and express your desire for a second interview. What not to do… Do not visit a company with a group of friends. Interact with the companies on your own, to make your own positive impression. Do not walk up to a recruiter and interrupt a current conversation; wait your turn and be polite. What you should absolutely avoid is a grab and run on freebies! Take the time to speak to the company and ask for a freebie at the end of the conversation in case they are not offered to you. Good luck with the preparations for the career fair you will attend. Oracle recruiters look forward to meet you! They will be present on a large number of fairs in the region. For an overview of the fairs go to the Events & Calendar page on http://campus.oracle.com If you have any questions related to this article feel free to contact [email protected].

  Read the article

• Feynman's inbox

  - by user12607414

  Here is Richard Feynman writing on the ease of criticizing theories, and the difficulty of forming them: The problem is not just to say something might be wrong, but to replace it by something — and that is not so easy. As soon as any really definite idea is substituted it becomes almost immediately apparent that it does not work. The second difficulty is that there is an infinite number of possibilities of these simple types. It is something like this. You are sitting working very hard, you have worked for a long time trying to open a safe. Then some Joe comes along who knows nothing about what you are doing, except that you are trying to open the safe. He says ‘Why don’t you try the combination 10:20:30?’ Because you are busy, you have tried a lot of things, maybe you have already tried 10:20:30. Maybe you know already that the middle number is 32 not 20. Maybe you know as a matter of fact that it is a five digit combination… So please do not send me any letters trying to tell me how the thing is going to work. I read them — I always read them to make sure that I have not already thought of what is suggested — but it takes too long to answer them, because they are usually in the class ‘try 10:20:30’. (“Seeking New Laws”, page 161 in The Character of Physical Law.) As a sometime designer (and longtime critic) of widely used computer systems, I have seen similar difficulties appear when anyone undertakes to publicly design a piece of software that may be used by many thousands of customers. (I have been on both sides of the fence, of course.) The design possibilities are endless, but the deep design problems are usually hidden beneath a mass of superfluous detail. The sheer numbers can be daunting. Even if only one customer out of a thousand feels a need to express a passionately held idea, it can take a long time to read all the mail. And it is a fact of life that many of those strong suggestions are only weakly supported by reason or evidence. Opinions are plentiful, but substantive research is time-consuming, and hence rare. A related phenomenon commonly seen with software is bike-shedding, where interlocutors focus on surface details like naming and syntax… or (come to think of it) like lock combinations. On the other hand, software is easier than quantum physics, and the population of people able to make substantial suggestions about software systems is several orders of magnitude bigger than Feynman’s circle of colleagues. My own work would be poorer without contributions — sometimes unsolicited, sometimes passionately urged on me — from the open source community. If a Nobel prize winner thought it was worthwhile to read his mail on the faint chance of learning a good idea, I am certainly not going to throw mine away. (In case anyone is still reading this, and is wondering what provoked a meditation on the quality of one’s inbox contents, I’ll simply point out that the volume has been very high, for many months, on the Lambda-Dev mailing list, where the next version of the Java language is being discussed. Bravo to those of my colleagues who are surfing that wave.) I started this note thinking there was an odd parallel between the life of the physicist and that of a software designer. On second thought, I’ll bet that is the story for anybody who works in public on something requiring special training. (And that would be pretty much anything worth doing.) In any case, Feynman saw it clearly and said it well.

  Read the article

• The Latest Major Release of AutoVue is Now Available!

  - by Pam Petropoulos

  Click here to read the full press release. To learn more about AutoVue 20.2, check out the What's New in AutoVue 20.2 Datasheet AutoVue 20.2 continues to set the standard for enterprise level visualization with Augmented Business Visualization, a new paradigm which reconciles information and business data from multiple sources into a single view, providing rich and actionable visual decision-making environments. The release also includes; capabilities that enhance end-to-end approval workflow; solutions to visually enable the mobile workforce; and support for the latest manufacturing and high tech formats.     New capabilities in release 20.2 include: ·         Enhancements to the Augmented Business Visualization framework o    Creation of 2D hotspots has been extended in 2D drawings, PDF and image files and can now be defined as regional boxes, rather than just text strings o    New 3D Hotspot links in models and drawings. Parts or components of 3D models can be selected to create hotspot links. ·         Enhanced end-to-end approval workflows with digital stamping and batch stamping improvements ·         Solutions that visually enable the mobile workforce and extend enterprise visualization to mobile devices, including iPads through OVDI (Oracle Virtual Desktop Infrastructure) ·         Enhancements to AutoVue enterprise readiness: reliability and performance improvements, as well as security enhancements which adhere to Oracle’s Software Security Assurance standards ·         Timely support for new MCAD, ECAD, and Office formats ·         New 20.2 versions of AutoVue Document Print Services and Integration SDK (iSDK) ·         New Dutch language availability   The press release also contains terrific supporting quotes from AutoVue customers and partners.        “AutoVue’s stamping enhancements will greatly benefit our building permit management processes,” said Ties Kremer, Information Manager, Noordenveld Municipality, Netherlands. “The ability to batch stamp documents will speed up our approval processes, enable us to save time and money, and help us meet our regulatory compliance obligations.”          “AutoVue provides our non-technical teams in marketing and sales with access to customer order requirements and supporting CAD documents and drawings,” said James Lim, Regional Technical Systems Manager at Molex Incorporated. “AutoVue 20.2 has enabled us to refine our quotation process, and reduce order errors.”         “We are excited about our use of AutoVue’s Augmented Business Visualization framework, which will offer Meridian users enhanced access to related technical documentation,” said Edwin van Dijk, Director of Product Management, BlueCielo.  “By including AutoVue’s new regional hotspot capabilities within BlueCielo Meridian Enterprise, the context of engineering information is carried over into the visual representation of complex assets, thereby helping us to improve productivity and operational excellence.”    

  Read the article

• A more elegant way of embedding a SOAP security header in Silverlight 4

  - by Your DisplayName here!

  The current situation with Silverlight is, that there is no support for the WCF federation binding. This means that all security token related interactions have to be done manually. Requesting the token from an STS is not really the bad part, sending it along with outgoing SOAP messages is what’s a little annoying. So far you had to wrap all calls on the channel in an OperationContextScope wrapping an IContextChannel. This “programming model” was a little disruptive (in addition to all the async stuff that you are forced to do). It seems that starting with SL4 there is more support for traditional WCF extensibility points – especially IEndpointBehavior, IClientMessageInspector. I never read somewhere that these are new features in SL4 – but I am pretty sure they did not exist in SL3. With the above mentioned interfaces at my disposal, I thought I have another go at embedding a security header – and yeah – I managed to make the code much prettier (and much less bizarre). Here’s the code for the behavior/inspector: public class IssuedTokenHeaderInspector : IClientMessageInspector {     RequestSecurityTokenResponse _rstr;       public IssuedTokenHeaderInspector(RequestSecurityTokenResponse rstr)     {         _rstr = rstr;     }       public void AfterReceiveReply(ref Message reply, object correlationState)     { }       public object BeforeSendRequest(ref Message request, IClientChannel channel)     {         request.Headers.Add(new IssuedTokenHeader(_rstr));                  return null;     } }   public class IssuedTokenHeaderBehavior : IEndpointBehavior {     RequestSecurityTokenResponse _rstr;       public IssuedTokenHeaderBehavior(RequestSecurityTokenResponse rstr)     {         if (rstr == null)         {             throw new ArgumentNullException();         }           _rstr = rstr;     }       public void ApplyClientBehavior(       ServiceEndpoint endpoint, ClientRuntime clientRuntime)     {         clientRuntime.MessageInspectors.Add(new IssuedTokenHeaderInspector(_rstr));     }       // rest omitted } This allows to set up a proxy with an issued token header and you don’t have to worry anymore with embedding the header manually with every call: var client = GetWSTrustClient();   var rst = new RequestSecurityToken(WSTrust13Constants.KeyTypes.Symmetric) {     AppliesTo = new EndpointAddress("https://rp/") };   client.IssueCompleted += (s, args) => {     _proxy = new StarterServiceContractClient();     _proxy.Endpoint.Behaviors.Add(new IssuedTokenHeaderBehavior(args.Result));   };   client.IssueAsync(rst); Since SL4 also support the IExtension<T> interface, you can also combine this with Nicholas Allen’s AutoHeaderExtension.

  Read the article

• LUKOIL Overseas Holding Optimizes Oil Field Development Projects with Integrated Project Management

  - by Melissa Centurio Lopes

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} LUKOIL Overseas Group is a growing oil and gas company that is an integral part of the vertically integrated oil company OAO LUKOIL. It is engaged in the exploration, acquisition, integration, and efficient development of oil and gas fields outside the Russian Federation to promote transforming LUKOIL into a transnational energy company. In 2010, the company signed a 20-year development project for the giant, West Qurna 2 oil field in Iraq. Executing 10,000 to 15,000 project activities simultaneously on 14 major construction and drilling projects in Iraq for the West Qurna-2 project meant the company needed a clear picture, in real time, of dependencies between its capital construction, geologic exploration and sinking projects—required for its building infrastructure oil field development projects in Iraq. LUKOIL Overseas Holding deployed Oracle’s Primavera P6 Enterprise Project Portfolio Management to generate structured project management information and optimize planning, monitoring, and analysis of all engineering and commercial activities—such as tenders, and bulk procurement of materials and equipment—related to oil field development projects. A word from LUKOIL Overseas Holding Ltd. “Previously, we created project schedules on desktop computers and uploaded them to the project server to be merged into one big file for each project participant to access. This was not scalable, as we’ve grown and now run up to 15,000 activities in numerous projects and subprojects at any time. With Oracle’s Primavera P6 Enterprise Project Portfolio Management, we can now work concurrently on projects with many team members, enjoy absolute security, and issue new baselines for all projects and project participants once a week, with ease.” – Sergey Kotov, Head of IT and the Communication Office, LUKOIL Mid-East Ltd. Oracle Primavera Solutions: · Facilitated managing dependencies between projects by enabling the general scheduler to reschedule all projects and subprojects once a week, realigning 10,000 to 15,000 project activities that the company runs at any time · Replaced Microsoft Project and a paper-based system with a complete solution that provides structured project data · Enhanced data security by establishing project management security policies that enable only authorized project members to edit their project tasks, while enabling each project participant to view all project data that are relevant to that individual’s task · Enabled the company to monitor project progress in comparison to the projected plan, based on physical project assets to determine if each project is on track to conclude within its time and budget limitations To view the full list of solutions view here. “Oracle Gold Partner Parma Telecom was key to our successful Primavera deployment, implementing the software’s basic functionalities, such as project content, timeframes management, and cost management, in addition to performing its integration with our enterprise resource planning system and intranet portal within ten months and in accordance with budgets,” said Rafik Baynazarov, head of the master planning and control office, LUKOIL Mid-East Ltd. “ To read the full version of the customer success story, please view here.

  Read the article

• Getting Help with 'SEPA' Questions

  - by MargaretW

  What is 'SEPA'? The Single Euro Payments Area (SEPA) is a self-regulatory initiative for the European banking industry championed by the European Commission (EC) and the European Central Bank (ECB). The aim of the SEPA initiative is to improve the efficiency of cross border payments and the economies of scale by developing common standards, procedures, and infrastructure. The SEPA territory currently consists of 33 European countries -- the 28 EU states, together with Iceland, Liechtenstein, Monaco, Norway and Switzerland. Part of that infrastructure includes two new SEPA instruments that were introduced in 2008: SEPA Credit Transfer (a Payables transaction in Oracle EBS) SEPA Core Direct Debit (a Receivables transaction in Oracle EBS) A SEPA Credit Transfer (SCT) is an outgoing payment instrument for the execution of credit transfers in Euro between customer payment accounts located in SEPA. SEPA Credit Transfers are executed on behalf of an Originator holding a payment account with an Originator Bank in favor of a Beneficiary holding a payment account at a Beneficiary Bank. In R12 of Oracle applications, the current SEPA credit transfer implementation is based on Version 5 of the "SEPA Credit Transfer Scheme Customer-To-Bank Implementation Guidelines" and the "SEPA Credit Transfer Scheme Rulebook" issued by European Payments Council (EPC). These guidelines define the rules to be applied to the UNIFI (ISO20022) XML message standards for the implementation of the SEPA Credit Transfers in the customer-to-bank space. This format is compliant with SEPA Credit Transfer version 6. A SEPA Core Direct Debit (SDD) is an incoming payment instrument used for making domestic and cross-border payments within the 33 countries of SEPA, wherein the debtor (payer) authorizes the creditor (payee) to collect the payment from his bank account. The payment can be a fixed amount like a mortgage payment, or variable amounts such as those of invoices. The "SEPA Core Direct Debit" scheme replaces various country-specific direct debit schemes currently prevailing within the SEPA zone. SDD is based on the ISO20022 XML messaging standards, version 5.0 of the "SEPA Core Direct Debit Scheme Rulebook", and "SEPA Direct Debit Core Scheme Customer-to-Bank Implementation Guidelines". This format is also compliant with SEPA Core Direct Debit version 6. EU Regulation #260/2012 established the technical and business requirements for both instruments in euro. The regulation is referred to as the "SEPA end-date regulation", and also defines the deadlines for the migration to the new SEPA instruments: Euro Member States: February 1, 2014 Non-Euro Member States: October 31, 2016. Oracle and SEPA Within the Oracle E-Business Suite of applications, Oracle Payables (AP), Oracle Receivables (AR), and Oracle Payments (IBY) provide SEPA transaction capabilities for the following releases, as noted: Release 11.5.10.x -  AP & AR Release 12.0.x - AP & AR & IBY Release 12.1.x - AP & AR & IBY Release 12.2.x - AP & AR & IBY Resources To assist our customers in migrating, using, and troubleshooting SEPA functionality, a number of resource documents related to SEPA are available on My Oracle Support (MOS), including: R11i: AP: White Paper - SEPA Credit Transfer V5 support in Oracle Payables, Doc ID 1404743.1R11i: AR: White Paper - SEPA Core Direct Debit v5.0 support in Oracle Receivables, Doc ID 1410159.1R12: IBY: White Paper - SEPA Credit Transfer v5 support in Oracle Payments, Doc ID 1404007.1R12: IBY: White Paper - SEPA Core Direct Debit v5 support in Oracle Payments, Doc ID 1420049.1R11i/R12: AP/AR/IBY: Get Help Setting Up, Using, and Troubleshooting SEPA Payments in Oracle, Doc ID 1594441.2R11i/R12: Single European Payments Area (SEPA) - UPDATES, Doc ID 1541718.1R11i/R12: FAQs for Single European Payments Area (SEPA), Doc ID 791226.1

  Read the article

• The inevitable Hello World post!

  - by brendonpage

  Greetings to anyone reading this! This is my first of hopefully many posts. I would like to use this post to introduce myself and to let you know what to expect from this blog in future. Okay so a bit about myself. In case you missed the name of this blog, my name is Brendon Page! I am a Software Developer from South Africa and work for a small company who’s main focus is producing software for the kitchen cupboard industry, although from time to time we do produce custom solutions for other industries. I work in a small team of 3, including myself, and am fortunate enough to work from home! I have been involved in IT since 1996, which is when I got my first PC, and started working as a junior programmer in 2003. Outside of work I enjoy playing squash, PC Games and of course LANing with my friends. If I get any free time between all of that I will usually dedicate some of it to a personal project, these are mainly prototypes for an idea I have had or for something that could be useful at work. I was in 2 minds on whether to include a photo of myself. The reason for this was because while I was looking for a suitable photo to use, it dawned on me how much time I dedicate to pulling funny faces in photos! I also realized how little I shave, which I blame completely on working form home. So after much debate here I am, funny face, beard and all!   Now that you know a bit about me lets move onto what expect from this blog. I work predominantly with Microsoft technologies so most if not all of my posts will be related to something Microsoft. Since most of my job entails Software Development you can expect a lot of posts which will deal with the .NET Framework. I am currently working on a large Silverlight project, so my first few posts will be targeted at in that direction. I will be striving to make the content of my posts as useful as possible from both an explanation and code perspective, I aim to include a working solution for every post, which I will put up on my skydrive for download. Here is what I have planned for my next few posts: Where did my session variables go?  Here I will take you through the lessons I learnt the hard way about the ASP.NET session. I am not going to go into to much depth in this post, as there is already a lot of information available on it. I mainly want to cover it in an effort to keep the scope creep of my posts to a minimum, some the solutions I upload will use it and I would like to have a post that I can reference to explain why I am doing something a certain way. Uploading files through SIlverlight Again there is a lot of existing information on this topic, so I wont be going into to much depth, but I will be using the solution from this as a base for my next post. Generating and Displaying DeepZoom images dynamically in Silverlight Well the title pretty much speaks for it’s self on this one. As I mentioned I will be building off the solution that I create in my ‘Uploading files through Silverlight’ post. Securing DeepZoom images using a custom implementation of the MultiScaleTileSource In this post I will look at the privacy issue surrounding the default usage of DeepZoom images in Silverlight and how to overcome it. This makes the use of DeepZoom in privacy conscious applications more viable. Thanks to anyone who actually read this post! I look forward to producing more which will hopefully be helpful to you.

  Read the article

• edited and reversed changes on .htaccess - site starts redirecting to .comindex.php/

  - by Aurigae

  Site is a Joomla 2.5 site. I wanted to add a non www to www redirect to the htaccess file, did so, then the redirection went mad, reversed but still the site redirects. When i click view site in admin panel, i get linked to http://domain.comindex.php/ The website is http://www.domain.com Visiting the website URL works without www, but once you click on projects it acts mad too. Projects is managed with joomshopping extension. EDIT: the redirect also happens when rewrite is deactivated in admin panel. ## # @package Joomla # @copyright Copyright (C) 2005 - 2012 Open Source Matters. All rights reserved. # @license GNU General Public License version 2 or later; see LICENSE.txt ## ## # READ THIS COMPLETELY IF YOU CHOOSE TO USE THIS FILE! # # The line just below this section: 'Options +FollowSymLinks' may cause problems # with some server configurations. It is required for use of mod_rewrite, but may already # be set by your server administrator in a way that dissallows changing it in # your .htaccess file. If using it causes your server to error out, comment it out (add # to # beginning of line), reload your site in your browser and test your sef url's. If they work, # it has been set by your server administrator and you do not need it set here. ## ## Can be commented out if causes errors, see notes above. Options +FollowSymLinks ## Mod_rewrite in use. RewriteEngine On ## Begin - Rewrite rules to block out some common exploits. # If you experience problems on your site block out the operations listed below # This attempts to block the most common type of exploit `attempts` to Joomla! # # Block out any script trying to base64_encode data within the URL. RewriteCond %{QUERY_STRING} base64_encode[^(]*\([^)]*\) [OR] # Block out any script that includes a <script> tag in URL. RewriteCond %{QUERY_STRING} (<|%3C)([^s]*s)+cript.*(>|%3E) [NC,OR] # Block out any script trying to set a PHP GLOBALS variable via URL. RewriteCond %{QUERY_STRING} GLOBALS(=|\[|\%[0-9A-Z]{0,2}) [OR] # Block out any script trying to modify a _REQUEST variable via URL. RewriteCond %{QUERY_STRING} _REQUEST(=|\[|\%[0-9A-Z]{0,2}) # Return 403 Forbidden header and show the content of the root homepage RewriteRule .* index.php [F] # ## End - Rewrite rules to block out some common exploits. ## Begin - Custom redirects # # If you need to redirect some pages, or set a canonical non-www to # www redirect (or vice versa), place that code here. Ensure those # redirects use the correct RewriteRule syntax and the [R=301,L] flags. # ## End - Custom redirects ## # Uncomment following line if your webserver's URL # is not directly related to physical file paths. # Update Your Joomla! Directory (just / for root). ## # RewriteBase / ## Begin - Joomla! core SEF Section. # RewriteRule .* - [E=HTTP_AUTHORIZATION:%{HTTP:Authorization}] # # If the requested path and file is not /index.php and the request # has not already been internally rewritten to the index.php script RewriteCond %{REQUEST_URI} !^/index\.php # and the request is for something within the component folder, # or for the site root, or for an extensionless URL, or the # requested URL ends with one of the listed extensions RewriteCond %{REQUEST_URI} /component/|(/[^.]*|\.(php|html?|feed|pdf|vcf|raw))$ [NC] # and the requested path and file doesn't directly match a physical file RewriteCond %{REQUEST_FILENAME} !-f # and the requested path and file doesn't directly match a physical folder RewriteCond %{REQUEST_FILENAME} !-d # internally rewrite the request to the index.php script RewriteRule .* index.php [L] # ## End - Joomla! core SEF Section. Redirect 301 /index.html /index.php Redirect 301 /services /project Redirect 301 /projects/projects.html /project Redirect 301 /projects/project1.html /project Redirect 301 /projects/project2.html /project Redirect 301 /projects /project Redirect 301 /keypersonnel.html /about-agrin/keystaff Redirect 301 /cooperation.htm /about-agrin/intcoop Redirect 301 /member.html /about-agrin/memberships Redirect 301 /contact.html /contacts Redirect 301 /hr.htm /jobs Redirect 301 /index.php/404 /index.php

  Read the article

• Field Report - Notes from IHRIM Atlanta Event

  - by Natalia Rachelson

  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} A guest post by Steve Boese, Director, Talent Strategy, Oracle Recently I had the pleasure to serve as a guest speaker at the IHRIM Atlanta/SE Chapter meeting in Atlanta, Georgia. The focus of my talk was Mobile Technology in Human Resources, and while still a new and developing area, the enormous growth and ubiquitous presence of mobile devices and increasing importance of and demand for constant connectivity in both our personal and professional lives has put planning and developing a mobile HR technology strategy high on many organizations lists of priorities in 2012. Numerous studies have shown that the confluence of ever-rising sales of smartphones and tablets; and the increasing tendency for workers of all kinds to be more mobile and less tied down to traditional, fixed-location workplaces and what now seem like old-fashioned PC-centric and traditional computing environments are driving Human Resources leaders to think about how, where, when, and for whom that the deployment of mobile HR solutions will help them address their business needs, and put information in the hands of those that need it, when they need it, and on their preferred devices. In the session we talked about some of the potential opportunities for mobile HR technologies, from simple workflow-based approval capability, to employee directories and robust employee profiles, to more advanced use cases like internal social networking and location-based mobile recruiting applications. And truly we are just scratching the surface of the potential and the value that all kinds of HR-related mobile technologies will help deliver to enterprises in the coming years. Additionally, it was encouraging to talk with many of the HR leaders in attendance who expressed interest in these kinds of mobile HR technology opportunities, as well as to hear how some of them are already working on developing their own mobile strategies or experimenting with mobile solutions in their workforces. It was a fantastic meeting and I’d like to express my thanks to Kim Bryant, IHRIM Atlanta/SE Board President, the other board members, and also the IHRIM Atlanta Chapter members and attendees at the event. If you are in the Atlanta area and are interested in HR and HR Technology, you can learn more about the programs and services that the Chapter has to offer at their website - http://www.ihrimatlantase.org/. And for people that are interested in what we at Oracle are working on in mobile, you can also sign up to receive the latest updates about the Oracle Fusion Applications tablet solutions, Oracle Fusion Tap, at https://fusiontap.oracle.com/.

  Read the article

• Find Knowledge Quickly

  - by Get Proactive Customer Adoption Team

  Untitled Document Get to relevant knowledge on the Oracle products you use in a few quick steps! Customers tell us that the volume of search results returned can make it difficult to find the information they need, especially when similar Oracle products exist. These simple tips show you how to filter, browse, search, and refine your results to get relevant answers faster. Filter first: PowerView is your best friend Powerview is an often ignored feature of My Oracle Support that enables you to control the information displayed on the Dashboard, the Knowledge tab and regions, and the Service Request tab based on one or more parameters. You can define a PowerView to limit information based on product, product line, support ID, platform, hostname, system name and others. Using PowerView allows you to restrict: Your search results to the filters you have set The product list when selecting your products in Search & Browse and when creating service requests   The PowerView menu is at the top of My Oracle Support, near the title You turn PowerView on by clicking PowerView is Off, which is a button. When PowerView is On, and filters are active, clicking the button again will toggle Powerview off. Click the arrow to the right to create new filters, edit filters, remove a filter, or choose from the list of previously created filters. You can create a PowerView in 3 simple steps! Turn PowerView on and select New from the PowerView menu. Select your filter from the Select Filter Type dropdown list and make selections from the other two menus. Hint: While there are many filter options, selecting your product line or your list of products will provide you with an effective filter. Click the plus sign (+) to add more filters. Click the minus sign (-) to remove a filter. Click Create to save and activated the filter(s) You’ll notice that PowerView is On displays along with the active filters. For more information about the PowerView capabilities, click the Learn more about PowerView… menu item or view a short video. Browse & Refine: Access the Best Match Fast For Your Product and Task In the Knowledge Browse region of the Knowledge or Dashboard tabs, pick your product, pick your task, select a version, if applicable. A best match document – a collection of knowledge articles and resources specific to your selections - may display, offering you a one-stop shop. The best match document, called an “information center,” is an aggregate of dynamically updated links to information pertinent to the product, task, and version (if applicable) you chose. These documents are refreshed every 24 hours to ensure that you have the most current information at your fingertips. Note: Not all products have “information centers.” If no information center appears as a best match, click Search to see a list of search results. From the information center, you can access topics from a product overview to security information, as shown in the left menu. Just want to search? That’s easy too! Again, pick your product, pick your task, select a version, if applicable, enter a keyword term, and click Search. Hint: In this example, you’ll notice that PowerView is on and set to PeopleSoft Enterprise. When PowerView is on and you select a product from the Knowledge Base product list, the listed products are limited to the active PowerView filter. (Products you’ve previously picked are also listed at the top of the dropdown list.) Your search results are displayed based on the parameters you entered. It’s that simple! Related Information: My Oracle Support - User Resource Center [ID 873313.1] My Oracle Support Community For more tips on using My Oracle Support, check out these short video training modules. My Oracle Support Speed Video Training [ID 603505.1]

  Read the article

• Graphics trouble after resuming from hibernate or suspend

  - by Voyagerfan5761

  I have a Dell Inspiron 2650 (with NVidia graphics, using nouveau drivers) that I'm using to try out Ubuntu. It's all great, except that Hibernate and Suspend aren't usable. Yes, I know that questions about power-save issues are rampant in the Linux support universe, but it seems that every time I find a solution it's for a very specific hardware combination and doesn't apply to me. So anyway, here goes. When I resume from either power-saving mode, I'll get graphics problems anywhere on the range from a few scattered random-colored pixels that won't change; all the way to full-screen patterns that don't change as I move the mouse, hit keys on the keyboard, or even bring up the shutdown dialog using the power button. Those full-screen issues (which may involve stripes with random pixels, partial black screen, or both) always end in me forcing the machine to shut down by holding the power button. I haven't done much testing yet to determine what severity level is most commonly associated with each mode, but I do avoid using either power-save option because of these issues. I'll add info on my hardware as I can gather it (no home internet connection, and this laptop is tethered to my desk by a dead battery and casing degradation). Please feel free to request something specific in the question comments. Hardware Info See this hardinfo report for my system's hardware configuration. (No, my username is not "myuser"; I sanitized hardinfo's output before publishing it.) Screenshots These screenshots are from a relatively mild occurrence, which happened after the second hibernation I took that session. The first one worked great, though I used the wireless card and Firefox heavily between the two hibernation attempts. Take a look at what happened when I opened my home directory in Nautilus and scrolled it: See below for the situations I've tested so far. The real trouble comes when the machine resumes to an unusable state; in such cases I can't even unlock the screen or properly reboot, much less take a screenshot. I have a hunch that putting a CD in the drive will cause such major failures, and I will try that at some point; see related question. Situations Tested Maverick (10.10) Suspend Seems to suspend nicely with nothing running Seems to suspend nicely with flash drive plugged in On resume from suspend with no flash drive, Terminal and gedit running: Funky graphics on top of log output, then blank screen with pixelated cursor; no response to power button (normally will shutdown 60 seconds later) Hibernate Seems to hibernate nicely with nothing running Seems to hibernate nicely with a few apps (Terminal, Mouse preferences) running Seems to not hibernate when flash drive plugged in Seems to not hibernate when System Monitor is running Have encountered failed hibernation (after several hours and one successful hibernate/thaw cycle) with no external media connected and no programs running except normal background stuff Natty LiveCD (11.04_2010-12-22) When I tested it, Natty wouldn't stay logged in. It played part of the login sound and then [ OK ] appeared in the top right corner (white-on-black terminal text) for a few seconds. Then it kicked me back to the Unlock screen. It did that four times before I gave up and just tested suspend from the Unlock screen. Suspend Resumed to vertical gray and black lines 2px (?) wide, then shifted to vertical "jail bars" of black over a black screen with above-described random pixels and mouse pointer. No apparent response to input from mouse (clicking randomly). Keyboard and touchpad unrecognized.

  Read the article

• Type of computer for a developer on the road

  - by nabucosound

  Hi developers: I am planning to be traveling through eurasia and asia (russia, china, korea, japan, south east asia...) for a while and, although there are plenty of marvelous things to see and to do, I must keep on working :(. I am a python developer, dedicated mainly to web projects. I use django, sqlite3, browsers, and ocassionaly (only if I have no choice) I install postgres, mysql, apache or any other servers commonly used in the internets. I do my coding on vim, use ssh to connect, lftp to transfer files, IRC, grep/ack... So I spend most of my time in the terminal shells. But I also use IM or Skype to communicate with my clients and peers, as well as some other software (that after all is not mandatory for my day-to-day work). I currently work with a Macbook Pro (3 years old now) and so far I am very happy with the performance. But I don't want to carry it if I am going to be "on transit" for long time, it is simply huge and heavy for what I am planning to load in my rather small backpack (while traveling, less is more, you know). So here I am reading all kind of opinions about netbooks, because at first sight this is the kind of computer I thought I had to choose. I am going to use Linux for it, Microsoft is not my cup of tea and Mac is not available for them, unless I were to buy a Macbook air, something that I won't do because if I am robbed or rain/dust/truck loaders break it I would burst in tears. I am concerned about wifi performance and connectivity, I am going to use one of those linux distros/tools to hack/test on "open" networks (if you know what I mean) in case I am not in a place with real free wifi access and I find myself in an emergency. CPU speed should be acceptable, but since I don't plan to run Photoshop or expensive IDEs, I guess most of the time I won't be overloading the machine. Apart from this, maybe (surely) I am missing other features to consider. With that said (sorry about the length) here it comes my question, raised from a deep ignorance regarding the wars betweeb betbooks vs notebooks (I assume tablet PCs are not for programming yet): If I buy a netbook will I have to throw it away after 1 month on the road and buy a notebook? Or will I be OK? Thanks! Hector Update I have received great feedback so far! I would like to insist on the fact that I will be traveling through many different countries and scenarios. I am sure that while in Japan I will be more than fine with anything related to technology, connectivity, etc. But consider that I will be, for example, on a train through Russia (transsiberian) and will cross Mongolia as well. I will stay in friends' places sometimes, but most of the time I will have to work from hostel rooms, trains, buses, beaches (hey this last one doesn't sound too bad hehe!). I think some of your answers guys seem to focus on the geek part but loose the point of this "on the road" fact. I am very aware and agree that netbooks suck compared to notebooks, but what I am trying to do here is to find a balance and discover your experiences with netbooks to see first hand if a netbook will be a fail in the mid-long term of the trip for my purposes. So I have resumed the main concepts expressed here on this small list, in no particular order: keyboard/touchpad feel: I use vim so no need of moving mouse pointers that much, unless I am browsing the web, but intensive use of keyboard screen real state: again, terminal work for most of the time battery life: I think something very important weight/size: also very important looks not worth stealing it, don't give a shit if it is lost/stolen/broken: this may depend on kind of person, your economy, etc. Also to prevent losing work, I will upload EVERYTHING to the cloud whenever I'll have a chance. wifi: don't want to discover my wifi is one of those that cannot deal with half the routers on this planet or has poor connectivity. Thanks again for your answers and comments!

  Read the article

• Dont Throw Duplicate Exceptions

  In your code, youll sometimes have write code that validates input using a variety of checks.  Assuming you havent embraced AOP and done everything with attributes, its likely that your defensive coding is going to look something like this: public void Foo(SomeClass someArgument) { if(someArgument == null) { throw new InvalidArgumentException("someArgument"); } if(!someArgument.IsValid()) { throw new InvalidArgumentException("someArgument"); }   // Do Real Work } Do you see a problem here?  Heres the deal Exceptions should be meaningful.  They have value at a number of levels: In the code, throwing an exception lets the develop know that there is an unsupported condition here In calling code, different types of exceptions may be handled differently At runtime, logging of exceptions provides a valuable diagnostic tool Its this last reason I want to focus on.  If you find yourself literally throwing the exact exception in more than one location within a given method, stop.  The stack trace for such an exception is likely going to be identical regardless of which path of execution led to the exception being thrown.  When that happens, you or whomever is debugging the problem will have to guess which exception was thrown.  Guessing is a great way to introduce additional problems and/or greatly increase the amount of time require to properly diagnose and correct any bugs related to this behavior. Dont Guess Be Specific When throwing an exception from multiple code paths within the code, be specific.  Virtually ever exception allows a custom message use it and ensure each case is unique.  If the exception might be handled differently by the caller, than consider implementing a new custom exception type.  Also, dont automatically think that you can improve the code by collapsing the if-then logic into a single call with short-circuiting (e.g. if(x == null || !x.IsValid()) ) that will guarantee that you cant easily throw different information into the message as easily as constructing the exception separately in each case. The code above might be refactored like so:   public void Foo(SomeClass someArgument) { if(someArgument == null) { throw new ArgumentNullException("someArgument"); } if(!someArgument.IsValid()) { throw new InvalidArgumentException("someArgument"); }   // Do Real Work } In this case its taking advantage of the fact that there is already an ArgumentNullException in the framework, but if you didnt have an IsValid() method and were doing validation on your own, it might look like this: public void Foo(SomeClass someArgument) { if(someArgument.Quantity < 0) { throw new InvalidArgumentException("someArgument", "Quantity cannot be less than 0. Quantity: " + someArgument.Quantity); } if(someArgument.Quantity > 100) { throw new InvalidArgumentException("someArgument", "SomeArgument.Quantity cannot exceed 100. Quantity: " + someArgument.Quantity); }   // Do Real Work }   Note that in this last example, Im throwing the same exception type in each case, but with different Message values.  Im also making sure to include the value that resulted in the exception, as this can be extremely useful for debugging.  (How many times have you wished NullReferenceException would tell you the name of the variable it was trying to reference?) Dont add work to those who will follow after you to maintain your application (especially since its likely to be you).  Be specific with your exception messages follow DRY when throwing exceptions within a given method by throwing unique exceptions for each interesting case of invalid state. Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Questions to ask to ensure someone understands programming? (and iOS)

  - by Stephen J

  So, I've been tutoring my friend for 2 years. Most people learn programming on their own in 3-6 months, (sans algorithms). It's confusing 'cause he'll run anywhere I tell him to, understands how to read C and C++ honestly better than the average college student, and he'll modify and repeat anything I do... but for the love of god he doesn't move on to new things and he still has test anxiety. I've recently realized he's copied and toyed with existing, but not once gained an understanding of why. I was under the impression he was learning fast because he could write it, but when you say "Make a function that takes an NSString" and he says "How?" and I say "The same way you make ANY function that takes any parameter, NSString is just a type like int" and all I hear is "No, it's an NSString, it's a special thing." and we get into an arguing match 'cause I'm like "It's just a class like any other class, you've used them for months now" and blah... I've subconsciously avoided comprehension questions because of this. Anyway, if you have him copy a program and say "Just initialize it" "Where?" "I don't care, didLoad or initWithCoder or Awake from nib, anywhere it gets initialized" and "No, it has to be exactly where you had it!" "No it doesn't!" I'm sick of this, but he won't give up. So I'm done avoiding these yelling matches and becoming a sadist from now on. I would like some help in finding questions to ask him that force him to understand what he's doing. I'd like some help and any resources I can find. CQuestions looked like a good site, but now I need some iPhone stuff. For example: *What do properties do? How are they changed? How do you change the name of the getter? *Why are Booleans inefficent? What advantage does int have over a boolean and how does the bit-shift operator help? *What does Copy do to a string? *What's the difference between a view controller and a uiview? *Write a program from memory that displays blah on screen, and flashes each view one by one. From beginner up to intermediate, hobbyist with some algebra at most. I'm just looking for resources to work with. I left in backstory so you know to "twist" the questions so he doesn't know he's supposed to init a variable here or there, but has to figure it out, and learn why it goes "here" or that "anywhere is fine as long as it's". Sample programs, anything. I'm relatively open about this because, being a programmer, I seriously doubt he's the only one who has this issue. I'd like to know how others have overcome similar. What made things "click"? for you? Did you have a hard time finding answers on Google, and how did you learn a better way to find what you were looking for? (He's so exact, he'll search for how to write a checkers program with color X and Y inside a uiview, as his search string, instead of breaking it up into components, I need help with that too, and believe it is related). This type of problem has to remind one of us of someone they know. So, Exercises to force them to think? Ways we overcame this thing in the past? I greatly appreciate any help.

  Read the article

• Web Developer - How to enhance my skillset?

  - by atif089

  First of all pardon my English. I am not a native English speaker I have been a Web Developer for the past 4 years. In these 4 years I have spent my time on the internet to learn things. My current skillset comprises of HTML CSS PHP MySQL jQuery (I would not say js and rather say jQuery because I am good at using jQuery and bad with plain javascript.) The above things seemed like an easier part of my life as I quickly learned them. But now I would really like to enhance my skillset and I am pretty confused which way to move ahead considering that I have to learn things using the web and references on my own. Design My first option is towards design. Shall I get started with design and start using Adobe Illustrator, Photoshop, Flash, Flex. Designing along with my previous skills looks like a money maker to me. As both are co-related to each other when web design is considered. And its easier to learn the first 2 and I hope I can get tutorials for the last 2 as well. Marketing A lot of my existing clients asked me if I do SEO. So this looked as a good field to me as well. I cannot estimate the scope of SEO but I assume it has a long future. Since I am business minded as well and there are a lot of tutorials around, should I start with SEO, SEM, Social Media, PPC or whatever it consists of. Software Development The complex plight and hardest thing (perhaps) but the easiest way to find a decent job in my location. If I go for software development what platform should be that I should be ideally going after? Should it be C# for windows development, or ASP.NET (once again enhances my skill set), J2EE (there are a lot of jobs for J2EE developers here) or plain C and C++. Also I think it is difficult to learn software languages right from Hello World, using internet? I have no clue how I learned PHP but I am sort of a pro now, but these other languages seems like a disaster to me? I cant figure out the reason if its because PHP is easier or there was a lot of tutorials around for PHP. Anyways is it also possible to learn software development right from Hello World using the web? Database / Server (Linux) / Network Administration Seems like a job with a decent pay but less number of jobs and a bit harder to learn online. (not sure) What should be the right track I should move ahead. P.S - Age is not a constraint for me as I am between 20-21, and I come from an IT background. I know quite little basics about C (upto structures) C++ (upto objects, I was not able to understand templates) Core Java (some basics and OOP concept) RDBMS Visual Basic 6 (used to do this long back) UNIX (a bunch of commands like who, finger, chmod, ls and a bit of #bash) Or is there anything else that I left out? I need you guys to please give me a feedback and the reason why I should select that field.

  Read the article

• Move on and look elsewhere, or confront the boss?

  - by Meister

  Background: I have my Associates in Applied Science (Comp/Info Tech) with a strong focus in programming, and I'm taking University classes to get my Bachelors. I was recently hired at a local company to be a Software Engineer I on a team of about 8, and I've been told they're looking to hire more. This is my first job, and I was offered what I feel to be an extremely generous starting salary ($30/hr essentially + benefits and yearly bonus). What got me hired was my passion for programming and a strong set of personal projects. Problem: I had no prior experience when I interviewed, so I didn't know exactly what to ask them about the company when I was hired. I've spotted a number of warning signs and annoyances since then, such as: Four developers when I started, with everyone talking about "Ben" or "Ryan" leaving. One engineer hired thirty days before me, one hired two weeks after me. Most of the department has been hiring a large number of people since I started. Extremely limited internet access. I understand the idea from an IT point of view, but not only is Facebook blocked, but so it Youtube, Twitter, and Pandora. I've also figured out that they block all access to non-DNS websites (http://xxx.xxx.xxx.xxx/) and strangely enough Miranda-IM. Low cubicles. Which is fine because I like my immediate coworkers, but they put the developers with the customer service, customer training, and QA department in a huge open room. Noise, noise, noise, and people stop to chitchat all day long. Headphones only go so far. Several emails have been sent out by my boss since I started telling us programmers to not talk about non-work-related-things like Video Games at our cubicles, despite us only spending maybe five minutes every few hours doing so. Further digging tells me that this is because someone keeps complaining that the programmers are "slacking off". People are looking over my shoulder all day. I was in the Freenode webchat to get help with a programming issue, and within minutes I had an email from my boss (to all the developers) telling us that we should NOT be connected to any outside chat servers at work. Version control system from 2005 that we must access with IE and keep the Java 1.4 JRE installed to be able to use. I accidentally updated to Java 6 one day and spent the next two days fighting with my PC to undo this "problem". No source control, no comments on anything, no standards, no code review, no unit testing, no common sense. I literally found a problem in how they handle string resource translations that stems from the simple fact that they don't trim excess white spaces, leading to developers doing: getResource("Date: ") instead of: getResource("Date") + ": ", and I was told to just add the excess white spaces back to the database instead of dealing with the issue directly. Some of these things I'd like to try to understand, but I like having IRC open to talk in a few different rooms during the day and keep in touch with friends/family over IM. They don't break my concentration (not NEARLY as much as the lady from QA stopping by to talk about her son), but because people are looking over my shoulder all day as they walk by they complain when they see something that's not "programmer-looking work". I've been told by my boss and QA that I do good, fast work. I should be judged on my work output and quality, not what I have up on my screen for the five seconds you're walking by So, my question is, even though I'm just barely at my 90 days: How do you decide to move on from a job and looking elsewhere, or when you should start working with your boss to resolve these issues? Is it even possible to get the boss to work with me in many of these things? This is the only place I heard back from even though I sent out several resume's a day for several months, and this place does pay well for putting up with their many flaws, but I'm just starting to get so miserable working here already. Should I just put up with it?

  Read the article

• Investigating Strategies For Functional Decomposition

  - by Liam McLennan

  Introducing Functional Decomposition Before I begin I must apologise. I think I am using the term ‘functional decomposition’ loosely, and probably incorrectly. For the purpose of this article I use functional decomposition to mean the recursive splitting of a large problem into increasingly smaller ones, so that the one large problem may be solved by solving a set of smaller problems. The justification for functional decomposition is that the decomposed problem is more easily solved. As software developers we recognise that the smaller pieces are more easily tested, since they do less and are more cohesive. Functional decomposition is important to all scientific pursuits. Once we understand natural selection we can start to look for humanities ancestral species, once we understand the big bang we can trace our expanding universe back to its origin. Isaac Newton acknowledged the compositional nature of his scientific achievements: If I have seen further than others, it is by standing upon the shoulders of giants   The Two Strategies For Functional Decomposition of Computer Programs Private Methods When I was working on my undergraduate degree I was taught to functionally decompose problems by using private methods. Consider the problem of painting a house. The obvious solution is to solve the problem as a single unit: public void PaintAHouse() { // all the things required to paint a house ... } We decompose the problem by breaking it into parts: public void PaintAHouse() { PaintUndercoat(); PaintTopcoat(); } private void PaintUndercoat() { // everything required to paint the undercoat } private void PaintTopcoat() { // everything required to paint the topcoat } The problem can be recursively decomposed until a sufficiently granular level of detail is reached: public void PaintAHouse() { PaintUndercoat(); PaintTopcoat(); } private void PaintUndercoat() { prepareSurface(); fetchUndercoat(); paintUndercoat(); } private void PaintTopcoat() { fetchPaint(); paintTopcoat(); } According to Wikipedia, at least one computer programmer has referred to this process as “the art of subroutining”. The practical issues that I have encountered when using private methods for decomposition are: To preserve the top level API all of the steps must be private. This means that they can’t easily be tested. The private methods often have little cohesion except that they form part of the same solution. Decomposing to Classes The alternative is to decompose large problems into multiple classes, effectively using a class instead of each private method. The API delegates to related classes, so the API is not polluted by the sub-steps of the problem, and the steps can be easily tested because they are each in their own highly cohesive class. Additionally, I think that this technique facilitates better adherence to the Single Responsibility Principle, since each class can be decomposed until it has precisely one responsibility. Revisiting my previous example using class composition: public class HousePainter { private undercoatPainter = new UndercoatPainter(); private topcoatPainter = new TopcoatPainter(); public void PaintAHouse() { undercoatPainter.Paint(); topcoatPainter.Paint(); } } Summary When decomposing a problem there is more than one way to represent the sub-problems. Using private methods keeps the logic in one place and prevents a proliferation of classes (thereby following the four rules of simple design) but the class decomposition is more easily testable and more compatible with the Single Responsibility Principle.

  Read the article

• Top 5 characteristics Recruiters are looking for

  - by Maria Sandu

  Of course many skills and characteristics recruiters are looking for are job specific. But whether you are a graduate fresh out of college or seasoned in the workplace, recruiters are also looking for generic skills and attitude to see whether you are a good fit to the company. So make sure you prepare and show through examples that you have these skills. 1. Drive/passion Liking the job you are applying for is paramount and something recruiters are always looking for. Show and prove your drive for the role and/or the field you are applying for. Always be prepared to pitch yourself, this shows your drive in the role you are applying for. 2. Communication skills People often make the mistake by thinking this skill is related to how good they are able to talk about their background and expertise. This is important, but as least as important is it that you listen well to questions that are asked. Make sure you answer to the point and ask questions if you want questions to be clarified. This shows your interest in the role and the ability to communicate clearly. This also helps you building trust with the recruiter every time you speak to him/her. 3. Confidence Recruiters are looking for the best candidate for the job. So if you don’t think you are the best candidate why should the recruiter? Show with confidence, without being arrogant (think about building trust), why you are the right person for the job. Confidence also shows in your answers to difficult questions. Be confident enough to explain why some experiences went wrong and how you learnt from them. If you don’t have a direct explanation on a question, it is better to ask for a second to think instead of a random answer. 4. Vision The main reason to hire graduates for many companies is that graduates are perceived to be flexible. The organisation will train and up skill you in the direction best suitable for the organisation. However the most intense learning path is realised when you also know where you want to go. Companies are often happy to accommodate you to support with training and development, but if you don’t have a clear vision on what you want to achieve for yourself and what value you bring to the company, recruiters can decide you are not the right candidate as they are afraid you aren’t going to stay in the company. 5. Business awareness For every job you apply you will get challenged on your knowledge and interest for the market and business they are in. All companies add value in different ways in their respective markets. So make sure you are aware of what a company is doing, what their goal is and why and how they exist and how you can add value for the company in the role you are applying for. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• New Oracle BI Applications released

  - by THE

  Oracle has just released two new Applications for Oracle Business Intelligence Analytics with the Normal 0 21 false false false DE X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} 7.9.6.x Extension Pack: Normal 0 21 false false false DE X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} · Oracle Manufacturing Analytics, part of the Oracle BI Applications product family, helps discrete and process manufacturing organizations optimize their supply networks by integrating data from across the enterprise value chain, thereby enabling executives, operations managers, cost accountants and production supervisors to make informed and actionable decisions related to manufacturing execution. Normal 0 21 false false false DE X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} · Oracle Enterprise Asset Management Analytics, part of the Oracle BI Applications product family, offers complete and enhanced visibility to enterprise-wide maintenance information. Pre-built reports covering Maintenance History, Maintenance Cost Analysis and Maintenance Work Orders, provide Maintenance Managers information to maximize performance, identify potential issues much in advance, and address them before they escalate into serious problems.  More Information about the existing Business Intelligence Analytics Applications can be found on this page: http://www.oracle.com/us/solutions/ent-performance-bi/bi-applications-066544.html If you are not familiar with Oracle Manufacturing or Oracle Enterprise Asset Management, these PDFs might get you started: http://www.oracle.com/us/products/applications/060289.pdf http://www.oracle.com/us/products/applications/057127.pdf

  Read the article

• Cloud Adoption Challenges

  - by Herve Roggero

  Originally posted on: http://geekswithblogs.net/hroggero/archive/2013/11/07/cloud-adoption-challenges.aspxWhile cloud computing makes sense for most organizations and countless projects, I have seen customers significantly struggle with cloud adoption challenges. This blog post is not an attempt to provide a generic assessment of cloud adoption; rather it is an account of personal experiences in the field, some of which may or may not apply to your organization. Cloud First, Burst? In the rush to cloud adoption some companies have made the decision to redesign their core system with a cloud first approach. However a cloud first approach means that the system may not work anymore on-premises after it has been redesigned, specifically if the system depends on Platform as a Service (PaaS) components (such as Azure Tables). While PaaS makes sense when your company is in a position to adopt the cloud exclusively, it can be difficult to leverage with systems that need to work in different clouds or on-premises. As a result, some companies are starting to rethink their cloud strategy by designing for on-premises first, and modify only the necessary components to burst when needed in the cloud. This generally means that the components need to work equally well in any environment, which requires leveraging Infrastructure as a Service (IaaS) or additional investments for PaaS applications, or both.  What’s the Problem? Although most companies can benefit from cloud computing, not all of them can clearly identify a business reason for doing so other than in very generic terms. I heard many companies claim “it’s cheaper”, or “it allows us to scale”, without any specific metric or clear strategy behind the adoption decision. Other companies have a very clear strategy behind cloud adoption and can precisely articulate business benefits, such as “we have a 500% increase in traffic twice a year, so we need to burst in the cloud to avoid doubling our network and server capacity”. Understanding the problem being solved through by adopting cloud computing can significantly help organizations determine the optimum path and timeline to adoption. Performance or Scalability? I stopped counting the number of times I heard “the cloud doesn’t scale; our database runs faster on a laptop”.  While performance and scalability are related concepts, they are nonetheless different in nature. Performance is a measure of response time under a given load (meaning with a specific number of users), while scalability is the performance curve over various loads. For example one system could see great performance with 100 users, but timeout with 1,000 users, in which case the system wouldn’t scale. However another system could have average performance with 100 users, but display the exact same performance with 1,000,000 users, in which case the system would scale. Understanding that cloud computing does not usually provide high performance, but instead provides the tools necessary to build a scalable system (usually using PaaS services such as queuing and data federation), is fundamental to proper cloud adoption. Uptime? Last but not least, you may want to read the Service Level Agreement of your cloud provider in detail if you haven’t done so. If you are expecting 99.99% uptime annually you may be in for a surprise. Depending on the component being used, there may be no associated SLA at all! Other components may be restarted at any time, or services may experience failover conditions weekly ( or more) based on current overall conditions of the cloud service provider, most of which are outside of your control. As a result, for PaaS cloud environments (and to a certain extent some IaaS systems), applications need to assume failure and gracefully retry to be successful in the cloud in order to provide service continuity to end users. About Herve Roggero Herve Roggero, Windows Azure MVP, is the founder of Blue Syntax Consulting (http://www.bluesyntax.net). Herve's experience includes software development, architecture, database administration and senior management with both global corporations and startup companies. Herve holds multiple certifications, including an MCDBA, MCSE, MCSD. He also holds a Master's degree in Business Administration from Indiana University. Herve is the co-author of "PRO SQL Azure" and “PRO SQL Server 2012 Practices” from Apress, a PluralSight author, and runs the Azure Florida Association.

  Read the article

• Microsoft Certifications &ndash; how to prep? and why?

  - by Kelly Jones

  I often get asked by my colleagues, “how do you prepare for Microsoft exams?” Well, the answer for me is a little complicated, so I thought I’d write up here what I do. The first thing I do is go to Microsoft’s website to find the exam that I need to take.  If you’re looking to get a particular certification, then their site lists the exam or exams that you’ll need to pass.  If you’ve already taken an exam, you can log onto the MCP website and use their certification planner.  This little tool tells you what tests you need, based on the exams you’ve already passed.  It is very helpful with the certifications that are multiple tests and especially ones that have electives. Once you’ve identified the test, you can use Microsoft’s website to see the topics that it covers.  This is a good outline to follow when you study.  I’ll keep this handy to reference back throughout my studying to make sure that I’m covering all the topics I need to know. The next step is probably where I am a little different from others.  IF the exam outline covers material that I’ve already been working with, then I’ll skip a lot of the studying and go directly to the practice tests.  However, if I’m looking at the outline and wondering how in the world do you do that? – then it’s time to hit the books. So, where to find study materials?  Try typing in the exam number into any search engine.  You’ll typically find a ton of resources.  If you’re lucky, you’ll find books that others recommend based on their studying and exam experience.  As a Sogeti employee, I have access to three really good resources: an internal company list of all of the consultants who have passed particular tests (on our Connex website), Books 24x7, and Transcender practice exams. Once my studying is done (either through books or experience), I’ll go through the practice exams.  I find them really helpful in getting my knowledge lined up to the thinking process that the exam writers use.  If I’m relying on my experience, then this really helps me to identify gaps in my knowledge that I’ll need to fill. That’s about it.  If I’m doing ok on the practice exams, then I’ll take the real thing.  I’ve found that the practice exams are usually more difficult than then real thing. Oh – one other thing I do related to Microsoft exams – I try to take any beta exams that Microsoft makes available that fall into my skill set.  Microsoft has started a blog to announce these and the seats usually fill up really quick.  The blog is at http://blogs.technet.com/betaexams/ . You don’t get your results instantly, like a normal exam, instead you have to wait for everyone to finish taking the beta exams and for Microsoft to determine which questions they are using and which they are dropping.  So, be prepared to wait six to eight weeks for your results.

  Read the article

• Oracle Applications Cloud Release 8 Customization: Your User Interface, Your Text

  - by ultan o'broin

  Introducing the User Interface Text Editor In Oracle Applications Cloud Release 8, there’s an addition to the customization tool set, called the User Interface Text Editor  (UITE). When signed in with an application administrator role, users launch this new editing feature from the Navigator's Tools > Customization > User Interface Text menu option. See how the editor is in there with other customization tools? User Interface Text Editor is launched from the Navigator Customization menu Applications customers need a way to make changes to the text that appears in the UI, without having to initiate an IT project. Business users can now easily change labels on fields, for example. Using a composer and activated sandbox, these users can take advantage of the Oracle Metadata Services (MDS), add a key to a text resource bundle, and then type in their preferred label and its description (as a best practice for further work, I’d recommend always completing that description). Changing a simplified UI field label using Oracle Composer In Release 8, the UITE enables business users to easily change UI text on a much wider basis. As with composers, the UITE requires an activated sandbox where users can make their changes safely, before committing them for others to see. The UITE is used for editing UI text that comes from Oracle ADF resource bundles or from the Message Dictionary (or FND_MESSAGE_% tables, if you’re old enough to remember such things). Functionally, the Message Dictionary is used for the text that appears in business rule-type error, warning or information messages, or as a text source when ADF resource bundles cannot be used. In the UITE, these Message Dictionary texts are referred to as Multi-part Validation Messages.   If the text comes from ADF resource bundles, then it’s categorized as User Interface Text in the UITE. This category refers to the text that appears in embedded help in the UI or in simple error, warning, confirmation, or information messages. The embedded help types used in the application are explained in an Oracle Fusion Applications User Experience (UX) design pattern set. The message types have a UX design pattern set too. Using UITE  The UITE enables users to search and replace text in UI strings using case sensitive options, as well as by type. Users select singular and plural options for text changes, should they apply. Searching and replacing text in the UITE The UITE also provides users with a way to preview and manage changes on an exclusion basis, before committing to the final result. There might, for example, be situations where a phrase or word needs to remain different from how it’s generally used in the application, depending on the context. Previewing replacement text changes. Changes can be excluded where required. Multi-Part Messages The Message Dictionary table architecture has been inherited from Oracle E-Business Suite days. However, there are important differences in the Oracle Applications Cloud version, notably the additional message text components, as explained in the UX Design Patterns. Message Dictionary text has a broad range of uses as indicated, and it can also be reserved for internal application use, for use by PL/SQL and C programs, and so on. Message Dictionary text may even concatenate together at run time, where required. The UITE handles the flexibility of such text architecture by enabling users to drill down on each message and see how it’s constructed in total. That way, users can ensure that any text changes being made are consistent throughout the different message parts. Multi-part (Message Dictionary) message components in the UITE Message Dictionary messages may also use supportability-related numbers, the ones that appear appended to the message text in the application’s UI. However, should you have the requirement to remove these numbers from users' view, the UITE is not the tool for the job. Instead, see my blog about using the Manage Messages UI.

  Read the article

< Previous Page | 383 384 385 386 387 388 389 390 391 392 393 394  | Next Page >