Search Results

Search found 27428 results on 1098 pages for 'copy local'.

Page 388/1098 | < Previous Page | 384 385 386 387 388 389 390 391 392 393 394 395  | Next Page >

• App to log network user's file activities

  - by Luke

  My employer recently purchased a Mac Pro server (2011 model) and we've installed OSX Lion Server from the Mac Appstore. I'm definitely no server admin, but I have been tasked with finding out the following: Can we monitor or log what users do? (ie, open a file, copy a file.... or file-related tasks) Can we stop files from being copied? Or be alerted when this does occur? Thanks in advance for any assistance.

  Read the article

• Can't make VM off Windows XP

  - by WebDevHobo

  I've got a copy of WinXP off of MSDNAA, with a key. I've mounted it to my CD-drive, and now I'm trying to make it in to a VM. The problem is, it seems that the thing is constantly trying to connect to a DHCP server, fails to connect and then decides no operating system was found. The file I got off MSDNAA was an .img file, so I had to mount it to a virtual CD drive. VmWare workstation comes with a Windows XP iso, tried that, also failed.

  Read the article

• Public static ip for vagrant box

  - by Numbata

  I have server (Debian Squeeze) with 1 ethernet card and 2 public static IPs (188.120.245.4 and 188.120.244.5). What I want: Setup virtual box (Ubuntu) with access via static IP (188.120.244.5). What I was trying: config.vm.forward_port - good idea: setup interface "eth1:1" with 188.120.244.5 on host-machine, and add to Vagrant file "config.vm.forward_port = hmm..?" config.vm.network :hostonly, "188.120.244.5" - not working. Was created new interface on host-machine with ip "188.120.244.1". Of course 188.120.244.1 IP isn't mine and I can't access my server via this IP. config.vm.network :bridged - I'm confused how this works :) What I have now: Not working configuration. Debian-host-machine# cat Vagrantfile Vagrant::Config.run do |config| config.vm.define :gitlab do |box_config| box_config.vm.box = "ubuntu" box_config.vm.host_name = "ubuntu" box_config.vm.network :bridged box_config.vm.network :hostonly, "188.120.244.5", :auto_config => false end end Debian-host-machine# ifconfig eth1 Link encap:Ethernet HWaddr 00:15:17:69:71:bb inet addr:188.120.245.4 Bcast:188.120.247.255 Mask:255.255.248.0 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 vboxnet0 Link encap:Ethernet HWaddr 0a:00:27:00:00:00 inet addr:188.120.244.1 Bcast:188.120.246.255 Mask:255.255.255.0 Ubuntu-virtual-machine# ifconfig eth0 Link encap:Ethernet HWaddr 08:00:27:ee:8d:0c inet addr:10.0.2.15 Bcast:10.0.2.255 Mask:255.255.255.0 eth1 Link encap:Ethernet HWaddr 08:00:27:45:71:87 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 How I can access virtual box via public static IP from network? I'm using Oracle VM VirtualBox Manager 4.1.18 and Vagrant version 1.0.3. Thanks in advance for your feedback.

  Read the article

• How to exclude HTML elements by ID or class using HTTrack or bash script

  - by pak memek

  I need to copy a website, but I want to exclude specific HTML elements by ID or class in all pages (using a bash script). I need this because I don't want ads or some other annoying features of some websites.

  Read the article

• Could you have a hard drive imaging option in Grub ?

  - by Manu

  Hello, I really like hd imaging programs, such as norton ghost, but I find that I don't run then as often as I should. Would it be possible to have, in grub, the following menu items: ? Boot from hard disk Copy hard disk to image Restore image

  Read the article

• Postfix / Dovecot email setup not storing email

  - by Nick Duffell

  I'm trying to setup postfix / dovecot on my debian server to use it for a mail server. I set everything up according to a tutorial on the net, and it all seemed OK. I can send emails from it, so SMTP is not a problem, however I cannot receive emails. Looking into the files in /home/nick/mail/ I can see that if I send an email to myself (from the server, to itself) the emails are there, but are put straight into the Deleted Messages folder. I don't know why this is. When I send an email from another mail account (not on this server), the emails are nowhere to be found. Also, looking at the log file /var/log/mail.log all seems to be OK, I get the following when I receive an email, which looks OK to me: Nov 7 22:47:22 nickduffell postfix/local[17825]: 05B1173581A6: to=, relay=local, delay=0.37, delays=0.31/0.02/0/0.03, dsn=2.0.0, status=sent (delivered to mailbox) Any ideas? Thanks EDIT: I should also add that although the emails I send myself are in the Deleted Messages folder, and in my mail client I can see that "Trash" has 3 items, I cannot download them in my mail client...

  Read the article

• Postfix + procmail - delivery fails because "can't create user output file" - on CentOS 6.2

  - by jshin47

  I verified that my postfix installation / relaying setup worked. Now I am having trouble with procmail. I have it wired to postfix with the following command: mailbox_command = /usr/bin/procmail -f -a "$USER" I have nothing in my procmail config but the following: LOGFILE=/var/procmailrc/log And I send an email to a recipient that previously worked (before I attached procmail). Now it fails with error: Apr 6 14:07:05 localhost postfix/qmgr[15194]: D0C3DFF6E1: from=<[email protected]>, size=938, nrcpt=1 (queue active) Apr 6 14:07:05 localhost postfix/local[1953]: D0C3DFF6E1: to=<[email protected]>, orig_to=<postmaster>, relay=local, delay=0.05, delays=0.02/0.01/0/0.02, dsn=5.2.0, status=bounced (can't create user output file. Command output: procmail: Couldn't create "/var/spool/mail/nobody" procmail: Couldn't read "//root" ) Apr 6 14:07:05 localhost postfix/bounce[1955]: warning: D0C3DFF6E1: undeliverable postmaster notification discarded Apr 6 14:07:05 localhost postfix/qmgr[15194]: D0C3DFF6E1: removed It seems like there is some sort of permissions issue but I do not know what the problem is, nor do I understand how I would go about diagnosing it further. The logfile that I specified is empty, by the way. How can I make procmail+postfix work?

  Read the article

• Which ports are needed for NTLM (Windows Authentication) to connect to SQL Server?

  - by Adam Bellaire

  I've got SQL server running on a machine which is not in a domain, and which is not operating in mixed mode (it's running with "Windows Authentication"). I'm trying to connect to it from a Linux web server running freetds via TCP/IP, using NTLM to authenticate. The firewall on the SQL server is very restrictive. 1433 is open to my web server, but I'm getting conflicting information from the web on what additional ports (TCP/UDP) are needed for NTLM to succeed. It is currently fail; I can talk on 1433 to request NTLM, but the actual authentication always fails. One source says 137, 138, 139, but those are just the NetBIOS ports. Do I really need those? Another source says 135. Still others seem to say 1434... I can't make heads or tails of it. Dammit Jim, I'm a programmer, not a network administrator! EDIT: The exact error message: Msg 18452, Level 14, State 1, Server , Line 0 Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection. Msg 20002, Level 9, State -1, Server OpenClient, Line -1 Adaptive Server connection failed I am attempting to connect with a remote machine username, i.e. 'servername\username'. Some sources recommend that I set up mirrored accounts on the local and remote machines, but the local machine is running Linux, not IIS under Windows.

  Read the article

• How to exclude an HTML element ID or class using HTTrack or bash script

  - by pak memek

  I need to copy a website, but I want to exclude specific HTML element IDs and classes in all pages (using a bash script). I need this because I don't want ads or some other annoying features of some websites.

  Read the article

• esx backup usb disk

  - by maruti

  my server has a disk error, unfortunately RAID-0. So i am planning to boot it off CD (partedmagic) and copy the VMs to a USB disk. File system is VMFS (esxi4) once the damaged disk is replaced back could the data be restored back? this server has two datastores this bad disk belongs to store-1. please suggest any better ways or tools. thanks in advance

  Read the article

• Enterprise desktop antivirus without a Windows server

  - by Adam

  Are there any desktop antivirus products suitable for use in an enterprise environment without a Windows server? We're currently using McAfee for our Windows desktops but to get updates and alerts with the latest version it looks like you need to be running their EPO server software. I'd like to avoid the cost of hardware and Windows licensing, and if possible to run just client-based antivirus. Ideally it would support: Updates from an internal copy of the definitions (e.g. a wget mirror) Automated configuration of the install Alerts from the client via email

  Read the article

• How force text-only pasting in emacs?

  - by eaubin

  On my mac I always have an emacs buffer open and occasionally I have to copy content from PowerPoint or Word. Unfortunately, copying to the clipboard and yanking into emacs saves all the ugly formatting (and graphics) from the original document. I only want to paste in the text (and never the formatting). My current solution is to paste into TextWrangler and then repaste into emacs. What's a better way to do this?

  Read the article

• Controling virtualbox internet access?

  - by HandyGandy

  Host: Linux/Debian/Ubuntu/Mint ( Helena/karmic koala ) Guest: XP SP2 and SP3 Problem: Relatively new copy of XP migrated to vbox-virus free. To detect biral infection it is desired that internet access is limited. Network access to the host is desired, but access to the internet should be limited to a select few sites. The added overhead of network access should be small when the guest vbox is running, 0 when it is not.

  Read the article

• sql 2008 disk layout on a budget this is for database mirroring

  - by user22215

  Guys I'm rolling out a SQL database server that will be used to back Sharepoint 2007. Right now I need some advice on my disk layout. I have two Dell servers that are configured a little differently in terms of storage. The principle server will be using a combination of local storage and san storage. I have to work with what I have the organization is currently all allocated on san storage it was like pulling teeth to even get what I have to work with now. My disk setup on the principle is as follows: raid 1 for OS raid 10 for logs raid 10 fiber on san for high IO databases raid 10 sata on san for content databases My question in regards to the principle server is where should I place the temp db? I thought about placing it on the fiber raid 10 which will be hosting my high IO Sharepoint SSP databases my only other choice is to move it to the raid 1 os partition which I’m sure you guys will be against. Now let’s talk about the mirror server it is not connected to the san it is all local 6 15k SAS drives. Now my question is the same do I put tempdb on the os partition or do I leave the os partition and use a single raid 10 for everything? Any help you can provide is much appreciated.

  Read the article

• Character map Utility for Mac ?

  - by mgpyone

  I want to type some special character like heart, Ohm sign , in Windows, I could be able to copy these from character map easily, is there any utility alike Windows Character map for Mac ?

  Read the article

• Windows 7 Calculator - how to make it stay on top always

  - by studiohack

  I'm use the Windows 7 built-in calculator from time to time, and when I use it, I want to make it stay above all the other windows, so I can see the numbers and copy them, etc to other applications. How can I do this? Other than putting the windows side-by-side please. Thanks!

  Read the article

• Copying to a USB boot sector on Ubuntu

  - by salamonti

  How to copy a file (boot file) to address zero on a USB flash drive? I am using Ubuntu.

  Read the article

• How seriously should I take ECC correctable error warnings?

  - by David Mackintosh

  I have a pile of Sun X2200-M2 servers. These servers have ECC memory. In some of these servers, I am getting warnings in the eLOM about "correctable ECC errors detected", eg: # ssh regress11 ipmitool sel elist 1 | 05/20/2010 | 14:20:27 | Memory CPU0 DIMM2 | Correctable ECC | Asserted 2 | 05/20/2010 | 14:33:47 | Memory CPU0 DIMM2 | Correctable ECC | Asserted ...some more frequently than others. The kernel on this particular system is throwing EDAC errors as well, although with far more frequency than the eLOM is recording ECC events: EDAC k8 MC0: general bus error: participating processor(local node response), time-out(no timeout) memory transaction type(generic read), mem or i/o(mem access), cache level(generic) MC0: CE page 0x42a194, offset 0x60, grain 8, syndrome 0xf654, row 4, channel 1, label "": k8_edac MC0: CE - no information available: k8_edac Error Overflow set EDAC k8 MC0: extended error code: ECC chipkill x4 error EDAC k8 MC0: general bus error: participating processor(local node response), time-out(no timeout) memory transaction type(generic read), mem or i/o(mem access), cache level(generic) MC0: CE page 0x48cb94, offset 0x10, grain 8, syndrome 0xf654, row 5, channel 1, label "": k8_edac MC0: CE - no information available: k8_edac Error Overflow set EDAC k8 MC0: extended error code: ECC chipkill x4 error Now if the server is detecting Uncorrectable ECC, the system resets, so clearly that's bad and removing/replacing the identified stick or pair corrects the issue. But I am thinking that if the error is Correctable, then there's no immediate issue -- I can treat this as a warning and be prepared to pull the stick/pair if an uncorrectable error starts occurring?

  Read the article

• Automate backing up e-mails in Outlook Express

  - by Michael Itzoe

  My client is a small business (three employees) that uses Outlook Express. They'd like to back up their email. I showed them how to export, but they balked at that. Is there a way I can automate exporting email? They already have a batch file they use that zips a copy of their data and I'd like to be able to add something to that to include email. Is this possible?

  Read the article

• AD User Passwords expiring without any notifications?

  - by scooter133

  We setup password Policies in Active Directory to Expire peoples passwords after so many days. Well it looks like the time has come for the Expiration of the Passwords and people are getting locked out... There has been no warning of user passwords about to expire. They just come in to work and they cannot log in, the phones no longer connect, nothing. Reset the password and all is good. Some of the users are locked out, though most are not, they just cannot log in. On setting the password Expiration, I didn't see anything about nor warning the users of the impending expiration. Seems like it used to warn you 15 days or so before it would expire. Clients range from: WinXP, WinVista, Win7 and Server 2008R2 Remote Desktop Services. How can I make sure my users are warned of the Expiration? Resultant Set of Policy for User that was not prompted: Account Policies/Password Policy Policy Setting Winning GPO Enforce password history 10 passwords remembered Default Domain Policy Maximum password age 270 days Default Domain Policy Minimum password age 0 days Default Domain Policy Minimum password length 4 characters Default Domain Policy Password must meet complexity requirements Disabled Default Domain Policy Store passwords using reversible encryption Disabled Default Domain Policy Account Policies/Account Lockout Policy Policy Setting Winning GPO Account lockout duration 20 minutes Default Domain Policy Account lockout threshold 5 invalid logon attempts Default Domain Policy Reset account lockout counter after 15 minutes Default Domain Policy Local Policies/Audit Policy Policy Setting Winning GPO Audit account logon events Failure Default Domain Policy Audit account management Success, Failure Default Domain Policy Audit directory service access Success, Failure Default Domain Policy Audit logon events Failure Default Domain Policy Audit policy change Success, Failure Default Domain Policy Audit privilege use Failure Default Domain Policy Local Policies/Security Options Interactive Logon Policy Setting Winning GPO Interactive logon: Prompt user to change password before expiration 7 days Default Domain Policy

  Read the article

• How to get gigabit network speeds on Windows XP?

  - by JB

  We've just installed gigabit switches at work, and things on the Linux side are going well. Our linux boxes, which use a Intel Corporation 82566DM-2 Gigabit nic (according to lspci), consistently get over 900 mbits/sec: iperf -c ipserver ------------------------------------------------------------ Client connecting to ipserver, TCP port 5001 TCP window size: 16.0 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.40.9 port 39823 connected with 192.168.1.115 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 1.08 GBytes 929 Mbits/sec We have a bunch of Windows XP 64-bit machines that use Broadcom NetXtreme 57xx cards. I spent around a day trying to get equivalent speeds on them, but couldn't get above 200 Mbits/sec. I noticed the Windows iperf tests said that the TCP window size was 8 Kb by default (as opposed to 16 Kb on Linux, so I modified my test to reflect that. Still no love. I went to Broadcom's site, downloaded the latest drivers for the card and installed. Still no love. However, finally, I tried a 64 Kb window size with the new drivers, and finally an improvement! $ iperf -c ipserver -w64k ------------------------------------------------------------ Client connecting to ipserver, TCP port 5001 TCP window size: 64.0 KByte ------------------------------------------------------------ [ 3] local 192.168.40.214 port 1848 connected with 192.168.1.115 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 933 MBytes 782 Mbits/sec Much better, but still not really taking advantage of the full capabilities of the network. If the Linux box can reach 950 Mbits/sec consistently, this box should be able to as well. Also, if you're wondering about the medium, this is over the same cable...I'm switching back and forth. Any suggestion or ideas would be really welcome. Thanks!

  Read the article

• Error while bringing up eth1

  - by mhay

  I'm getting this error while bringing up my network card: (process:2550): WARNING **: _nm_object_get_property: Error getting 'State' for /org/freedesktop/NetworkManager/ActiveConnection/3: (19) Method "Get" with signature "ss" on interface "org.freedesktop.DBus.Properties" doesn't exist I'm using the following commands: 1. ifup eth1 2. /etc/init.d/network restart I have installed a fresh copy of Centos 6.2 and configured the network card.

  Read the article

• Can I setup NAT for the same service, two public IPs on different routers to the same private IP?

  - by James

  This might be needlessly complex, but here goes. I've got two Firebox x550e devices. The first has a local IP of 10.0.0.1, public IP 64.x.x.x. The second has a local IP of 10.0.0.10, public IP 70.x.x.x. There is an FTP server on our LAN with a private IP of 10.0.0.55. I've set up NAT rules in each of the Fireboxes, on the first firebox it is 64.x.x.x-10.0.0.55 tcp 21, on the second 70.x.x.x-10.0.0.55 tcp 21. The first rule works fine. I can ftp to 64.x.x.x and everything's good. The second rule doesn't work. ftp to 70.x.x.x results in a connection timeout. The second firebox logs say the connection is being allowed through. The default gateway on the FTP server is 10.0.0.1 (the first firebox) If I change the default gateway on the server to 10.0.0.10, the rule on the second firebox starts working, but the rule from the first firebox stops. Is there some way to make this work for both rules?

  Read the article

• Import outlook emails into thunderbird.

  - by Jeff

  Hi, I have stored my email from outlook as single messages, i.e., xxx.msg format. I am wondering if there is any way to import those email into thunderbird? Do I just need to copy them into a specific folder? A bit clueless right now. Many thanks, Jeff

  Read the article

• Specific DNS sometimes resolves to wildcard, incorrectly

  - by Mojo

  I have an intermittent problem, and I'm not sure where to start trying to troubleshoot it. In our dev environment, we have two visible IP addresses on load balancers, one to the front-end, and one to a number of back-end service machines. The front-end is configured to take a wildcard DNS name to support generic "portals." dev.example.com A 10.1.1.1 *.dev.example.com CNAME dev.example.com The back-end servers are all specific names within the same space: core.dev.example.com A 10.1.1.2 cms.dev.example.com CNAME core.dev.example.com search.dev.example.com CNAME core.dev.example.com Here's the problem. Periodically a developer or a program trying to reach, say, cms.dev.example.com will get a result that points to the front-end, instead of the back-end load balancer: cms.dev.example.com is an alias to core.dev.example.com core.dev.example.com is an alias to dev.example.com (WRONG!) dev.example.com 10.1.1.1 The developers are all on Mac OS X machines, though I've seen the problem occur on an Ubuntu machine as well, using a local cloud host DNS resolver. Sometimes the developer is using a VPN, which directs the DNS to its own resolver, and sometimes he's on the local net using a DNS resolver assigned by the NAT router. Sometimes clearing the Mac OS X DNS cache, logging into the VPN, then logging out of the VPN, will make the problem go away. The origin authoritative server is on zerigo, and a dig directly to their name servers always seems to give the correct answer. The published DNS cache time for these records is 15 minutes, but the problem has been intermittent for about a week. Any troubleshooting suggestions?

  Read the article

< Previous Page | 384 385 386 387 388 389 390 391 392 393 394 395  | Next Page >