Search Results

Search found 17615 results on 705 pages for 'background job'.

Page 389/705 | < Previous Page | 385 386 387 388 389 390 391 392 393 394 395 396  | Next Page >

  • On mobile is there a reason why processes are often short lived and must persist their state explicitly?

    - by Alexandre Jasmin
    Most mobile platforms (such as Android, iOS, Windows phone 7 and I believe the new WinRT) can kill inactive application processes under memory pressure. To prevent this from affecting the user experience applications are expected to save and restore their state as their process is killed and restarted. Having application processes killed in this way makes the developers job harder. On various occasions I've seen a mobile app that would: Return to the welcome screen each time I switch back to it. Crash when I switch back to it (possibly accessing some state that no longer exists after the process was killed) Misbehave when I switch back to it (sometimes requiring a restart or tasks killer to fix) Otherwise misbehave in some hard to reproduce way (e.g. android service killed and restarted at the wrong time) I don't really understand why these mobile operating systems are designed to kill tasks in this way especially since it makes application development more difficult and error prone. Desktop operating systems don't kill processes like that. They swap out unused pages of memory to mass storage. Is there a reason why the same approach isn't used on mobile? Mobile hardware is only a few years behind PC hardware in term of performance. I'm sure there are very good reasons why mobile operating systems are designed this way. If you can point me to a paper or blog post that explain these reasons or can give me some insight I'd very much appreciate it.

    Read the article

  • What should JavaScript be renamed to [closed]

    - by Evan Plaice
    Background: I have been watching Douglas Crockford's series of presentation about JavaScript History (which I highly recommend) lately and a one comment of his specifically piqued my attention. The trademark for 'JavaScript' is owned by Oracle History: Due to time constraints at Netscape, the language was literally written in weeks and released in very buggy form. To make it seem more appealing, Netscape picked JavaScript to appeal to the massively growing population of Java developers. Unfortunately, this pissed off Sun and stirred up a lot of controversy between the two organizations. At some point, they came to an agreement whereby Netscape was given permission to use the name as long as Sun owned the trademark. Some people incorrectly refer to JavaScript as ECMAScript because that's where the standard for the language is registered but, aside from it's current marketing-driven label, it doesn't really have a name. Fast Forward Sun goes down only to be swallowed by Oracle, who has no reservations about litigating for profit, now owns the name. So... If Oracle decides and forces JavaScript to take on a new name, what name would best represent the language?

    Read the article

  • Loading a Template From a User Control

    - by Ricardo Peres
    What if you wanted to load a template (ITemplate property) from an external user control (.ascx) file? Yes, it is possible; there are a number of ways to do this, the one I'll talk about here is through a type converter. You need to apply a TypeConverterAttribute to your ITemplate property where you specify a custom type converter that does the job. This type converter relies on InstanceDescriptor. Here is the code for it: public class TemplateTypeConverter: TypeConverter { public override Boolean CanConvertFrom(ITypeDescriptorContext context, Type sourceType) { return ((sourceType == typeof(String)) || (base.CanConvertFrom(context, sourceType) == true)); } public override Boolean CanConvertTo(ITypeDescriptorContext context, Type destinationType) { return ((destinationType == typeof(InstanceDescriptor)) || (base.CanConvertTo(context, destinationType) == true)); } public override Object ConvertTo(ITypeDescriptorContext context, CultureInfo culture, Object value, Type destinationType) { if (destinationType == typeof(InstanceDescriptor)) { Object objectFactory = value.GetType().GetField("_objectFactory", BindingFlags.NonPublic | BindingFlags.Instance).GetValue(value); Object builtType = objectFactory.GetType().BaseType.GetField("_builtType", BindingFlags.NonPublic | BindingFlags.Instance).GetValue(objectFactory); MethodInfo loadTemplate = typeof(TemplateTypeConverter).GetMethod("LoadTemplate"); return (new InstanceDescriptor(loadTemplate, new Object [] { "~/" + (builtType as Type).Name.Replace('_', '/').Replace("/ascx", ".ascx") })); } return base.ConvertTo(context, culture, value, destinationType); } public static ITemplate LoadTemplate(String virtualPath) { using (Page page = new Page()) { return (page.LoadTemplate(virtualPath)); } } } And, on your control: public class MyControl: Control { [Browsable(false)] [TypeConverter(typeof(TemplateTypeConverter))] public ITemplate Template { get; set; } } This allows the following declaration: Hope this helps! SyntaxHighlighter.config.clipboardSwf = 'http://alexgorbatchev.com/pub/sh/2.0.320/scripts/clipboard.swf'; SyntaxHighlighter.brushes.CSharp.aliases = ['c#', 'c-sharp', 'csharp']; SyntaxHighlighter.brushes.Xml.aliases = ['xml']; SyntaxHighlighter.all();

    Read the article

  • Pro BizTalk 2009

    - by Sean Feldman
    I have finished reading Pro BizTalk 2009 book from APress. This is a great book  if you’ve never dealt with BizTalk in the past and want to have a quick “on-ramp”. Although the book is very concerned about right way of building traditional BizTalk applications, it also dedicates a chapter to ESB Toolkit and does a good job in analyzing it. The fact that authors were concerned with subject such as coupling, hard-coding, automation, etc. makes it very interesting. One warning, if you are expecting to have a book that will guide you how to apply step by step examples, forget it. Nor this book does it, neither it’s possible due to multiple erratas found in it. I really was disappointed by the number of typos, inaccuracies, and technical mistakes. These kind of things turn readers away, especially when they had no experience with BT in the past. But this is the only bad thing about it. As for the rest – great content. Next week I am taking a deep dive course on BizTalk 2009. I really feel that this book has helped me a lot to get my feet wet. Next target will be ESB Tookit. To get to that, I will use what the book authors wrote “you have to understand how BizTalk as an engine works”.

    Read the article

  • help! corrupt file recovery

    - by TheBumpper
    My supervisor computer crashed last night, and I'm trying to help him out. He made an R script but when he tried to open it, it was empty. But for some reason the file is 7.9kb so it should not be empty i think... anyway when i tried to open it, Gedit gave this error: "The file you opened has some invalid characters. If you continue editing this file you could corrupt this document. You can also choose another character encoding and try again." and the options to encode the characters. It looked like this(with a red background): \00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\ My question is, is there a way to restore the file? i hope someone has a brilliant idea

    Read the article

  • Does a site's bounce rate influence Google rankings?

    - by Joel Spolsky
    Does Google consider bounce rate or something similar in ranking sites? Background: here at Stack Exchange we noticed that the latest Google algorithm changes resulted in about a 20% dip in traffic to Server Fault (and a much smaller dip in traffic to Super User). Stack Overflow traffic was not affected. There was an article on WebProNews which hypothesized that bounce rate might be a ranking signal in Google's latest Panda update. According to Google Analytics, these are our bounce rates over the last month: Site Bounce Rate Avg Time on Site ------------- ----------- ---------------- SuperUser 84.67% 01:16 ServerFault 83.76% 00:53 Stack Overflow 63.63% 04:12 Now, technically, Google has no way to know the bounce rate. If you go to Google, search for something, and click on the first result, Google can't tell the difference between: a user who turns off their computer a user who goes to a completely different web site a user who spends hours clicking around on the website they landed on What Google does know is how long it takes the user to come back to Google and do another search. According to the book In The Plex (page 47), Google distinguishes between what they call "short clicks" and "long clicks": A short click is a search where the user quickly comes back to Google and does another search. Google interprets this as a signal that the first search results were unsatisfactory. A long click is a search where the user doesn't search again for a long time. The book says that Google uses this information internally, to judge the quality of their own algorithms. It also said that short click data in which someone retypes a slight variation of the search is used to fuel the "Did you mean...?" spell checking algorithm. So, my hypothesis is that Google has recently decided to use long click rates as a signal of a high quality site. Does anyone have any evidence of this? Have you seen any high-bounce-rate sites which lost traffic (or vice-versa)?

    Read the article

  • Why is IaaS important in Azure&hellip;

    - by Steve Loethen
    Three weeks ago, Microsoft released the next phase of Azure.  I have had several clients waiting on this release.  The fact that they have been waiting and are now more receptive to looking at the cloud.  Customers expressed fear of the unknown.  And a fear of lack of control, even when that lack of control also means a huge degree of flexibility to innovate with concerns about the underlying infrastructure.  I think IaaS will be that “gateway drug” to get customers who have been hesitant to take another look at the cloud.  The dialog can change from the cloud being this big scary unknown to a resource for workloads.  The conversations should have always been, and can know be even stronger, geared toward the following points: 1) The cloud is not unicorns and glitter, the cloud is resources.  Compute, storage, db’s, services bus, cache…..  Like many of the resources we have on-premise.  Not magic, just another resource with advantages and obstacles like any other resource. 2) The cloud should be part of the conversation for any new project.  All of the same criteria should be applied, on-premise or off.  Cost, security, reliability, scalability, speed to deploy, cost of licenses, need to customize image, complex workloads.  We have been having these discussions for years when we talk about on-premise projects.  We make decisions on OS’s, Databases, ESB’s, configuration and products based on a myriad of factors.  We use the same factors but now we have a additional set of resources to consider in our process. 3) The cloud is a great solution looking for some interesting problems.  It is our job to recognize the right problems that fit into the cloud, weigh the factors and decide what to do. IaaS makes this discussion easier, offers more choices, and often choices that many enterprises will find more better than PaaS.  Looking forward to helping clients realize the power of the cloud.

    Read the article

  • Career Advice for a career shifter

    - by newbie
    Hi! I am an industrial engineer and last May 2010 at the age of 25, I resigned from my job and decided to have a career shift to IT. I am studying again and so far learned the basics of the following programming languages: C, Java (SE), MySql, html, css, javascript. I am really just a beginner in everything and only have little knowledge on data structures / algorithms, software engineering and network systems. I am currently focusing all my attention to Java so that I'll have at least one expertise. And so far, i could only make small games like hangman and battleship. I will finish my 1 year diploma in IT this May and I need to know what kinds of jobs should I apply to start my career as an IT practitioner (application developer)? I am really confused and afraid because I am already old and I need to begin again my career from scratch and I don't know where to start. Where should I start???? Thank you very much. Your reply would be highly appreciated.

    Read the article

  • F# performance vs Erlang performance, is there proof the Erlang's VM is faster?

    - by afuzzyllama
    I've been putting time into learning functional programming and I've come to the part where I want to start writing a project instead of just dabbling in tutorials/examples. While doing my research, I've found that Erlang seems to be a pretty powerful when it comes to writing concurrent software (which is my goal), but resources and tools for development aren't as mature as Microsoft development products. F# can run on linux (Mono) so that requirement is met, but while looking around on the internet I cannot find any comparisons of F# vs Erlang. Right now, I am leaning towards Erlang just because it seems to have the most press, but I am curious if there is really any performance difference between the two languages. Since I am use to developing in .NET, I can probably get up to speed with F# a lot faster than Erlang, but I cannot find any resource to convince me that F# is just as scalable as Erlang. I am most interested in simulation, which is going to be firing a lot of quickly processed messages to persistant nodes. If I have not done a good job with what I am trying to ask, please ask for more verification.

    Read the article

  • Writing a Book, and Moving my Blog

    - by Ben Nevarez
    I started blogging about SQL Server here at SQLblog back in July, 2009 and it was a lot of fun, I enjoyed it a lot. Then later, after a series of blog posts about the Query Optimizer, I was invited to write an entire book about that same topic. But after a few months I realized that it was going to be hard to continue both blogging and writing chapters for a book, this in addition to my regular day job, so I decided to stop blogging for a little while.   Now that I have finished the last chapter of the book and I am working on the final chapter reviews, I decided to start blogging again. This time I am moving my blog to   http://www.benjaminnevarez.com   Same as my previous posts I plan to write about my topics of interest, like the relational engine, and basically anything related to SQL Server. Hopefully you find my new blog interesting and useful.   Finally, I would like to thank Adam for allowing me to blog here. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • Desktop Fun: Dual Monitor Wallpaper Collection Series 2

    - by Asian Angel
    Last month we brought you the first batch of wallpapers geared specifically towards dual monitor setups. Today we present the second offering in our series of dual monitor wallpaper collections. Note: Click on the picture to see the full-size image—these wallpapers vary in size so you may need to crop, stretch, or place them on a colored background in order to best match them to your screen’s resolution. More Dual Monitor Goodness Desktop Fun: Dual Monitor Wallpaper Collection Series 1 Span the same wallpaper across two monitors or use a different wallpaper for each. Dual Monitors: Use a Different Wallpaper on Each Desktop in Windows 7, Vista or XP For more wallpapers be certain to see our great collections in the Desktop Fun section. Latest Features How-To Geek ETC The 20 Best How-To Geek Linux Articles of 2010 The 50 Best How-To Geek Windows Articles of 2010 The 20 Best How-To Geek Explainer Topics for 2010 How to Disable Caps Lock Key in Windows 7 or Vista How to Use the Avira Rescue CD to Clean Your Infected PC The Complete List of iPad Tips, Tricks, and Tutorials Tune Pop Enhances Android Music Notifications Another Busy Night in Gotham City Wallpaper Classic Super Mario Brothers Theme for Chrome and Iron Experimental Firefox Builds Put Tabs on the Title Bar (Available for Download) Android Trojan Found in the Wild Chaos, Panic, and Disorder Wallpaper

    Read the article

  • Stupid Geek Tricks: Compare Your Browser’s Memory Usage with Google Chrome

    - by The Geek
    Ever tried to figure out exactly how much memory Google Chrome or Internet Explorer is using? Since they each show up a bunch of times in Task Manager, it’s not so easy! Here’s the quick and easy way to compare them. Both Chrome and IE use multiple processes to isolate tabs from each other, to make sure that one tab doesn’t kill the whole browser. Firefox, on the other hand, just uses a single process for everything. Rather than pulling out a calculator and adding them all up, you can just open up Google Chrome, and type in about:memory into the location bar to see a full list of each browser’s memory usage.   On my test system with 6 GB of system RAM, I’m running the Development channel version of Chrome, and I’ve got about 40 different tabs open, which is why the memory usage is so high. Firefox has 8 tabs open, and IE is enjoying being opened for the first time in forever. Want to help cut down on memory usage and keep your Chrome browser running fast? Disable all unnecessary extensions, and then make sure you disable any plug-ins that you don’t need either. Similar Articles Productive Geek Tips Stupid Geek Tricks: Duplicate a Tab with a Shortcut Key in Chrome or FirefoxStupid Geek Tricks: Shrink the XP Volume ControlStupid Geek Tricks: Tile or Cascade Multiple Windows in Windows 7Fix for Firefox memory leak on WindowsHow to Purge Memory in Google Chrome TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Download Free MP3s from Amazon Awe inspiring, inter-galactic theme (Win 7) Case Study – How to Optimize Popular Wordpress Sites Restore Hidden Updates in Windows 7 & Vista Iceland an Insurance Job? Find Downloads and Add-ins for Outlook

    Read the article

  • Oracle Outsourced Repair Solution: The “Control Tower” for the Reverse Supply Chain

    - by John Murphy
    By Hannes Sandmeier, Vice President of cMRO and Depot Repair Development Smart businesses are increasing their focus on core competencies and aggressively cutting costs in their supply chains. Outsourcing repairs can enable a business to focus on what they do best and most profitably while delivering top-notch customer service through partners that specialize in reverse logistics and repair. A well managed “virtual service organization” can deliver fast turn times, lower costs and high customer satisfaction. A poorly managed partner network can deliver disaster for your business. Managing a virtual service organization requires accurate, real-time information and collaboration tools that enable smart, informed and immediate corrective action. To meet this need, Oracle has released the Oracle Outsourced Repair Solution to provide the “control tower” for managing outsourced reverse supply chain operations from customer complaint through remediation to partner claim settlement. The new solution provides real-time visibility to return status, location, turn time, discrepancies and partner performance. Additionally, its web portals allow partners and carriers to view assigned work, request parts, enter data, capture time and submit claims. Leveraging the combined power of Oracle E-Business Suite and Oracle E-Business Suite Extensions for Oracle Endeca, the Oracle Outsourced Repair Solution provides a comprehensive set of tools that range from quick online partner registration to partner claim reconciliation, from capturing parts and labor to Oracle Cost Management and Financials integration, and from part requisition to waste and hazmat controls. These tools empower service operations managers to: · Increase customer satisfaction Ensure customers are satisfied by holding partners accountable for the speed and quality of repairs, and taking immediate corrective action when things go wrong · Reduce costs: Remove waste from the repair process using accurate job cost and cost breakdown data · Increase return velocity: Users have the tools to view all orders in flight and immediately know the current location, status, owner and contact point for repairs so as to be able to remove bottlenecks, resolve discrepancies and manage escalations The Oracle Outsourced Repair Solution further demonstrates Oracle’s commitment to helping supply chain professionals and service managers deliver high customer satisfaction at the lowest cost. For more information on the Oracle Outsourced Repair Solution, visit here. 

    Read the article

  • Implementing fog of war in opengl es 2.0 game

    - by joxnas
    Hi game development community, this is my first question here! ;) I'm developing a tactics/strategy real time android game and I've been wondering for some time what's the best way to implement an efficient and somewhat nice looking fog of war to incorporate in it. My experience with OpenGL or Android is not vast by any means, but I think it is sufficient for what I'm asking here. So far I have thought in some solutions: Draw white circles to a dark background, corresponding to the units visibility, then render to a texture, and then drawing a quad with that texture with blend mode set to multiply. Will this approach be efficient? Will it take too much memory? (I don't know how to render to texture and then use the texture. Is it too messy?) Have a grid object with a vertex shader which has an array of uniforms having the coordinates of all units, and another array which has their visibility range. The number of units will very probably never be bigger then 100. The vertex shader needs to test for each considered vertex, if there is some unit which can see it. In order to do this it, will have to loop the array with the coordinates and do some calculations based on distance. The efficiency of this is inversely proportional to the looks of it. A more dense grid will result in a more beautiful fog of war... but will require a greater amount of vertexes to be checked. Is it possible to find a nice compromise or is this a bad solution from the start? Which solution is the best? Are there better alternatives? Which ones? Thank you for your time.

    Read the article

  • Service Level Loggin/Tracing

    - by Ahsan Alam
    We all love to develop services, right? First timers want to learn technologies like WCF and Web Services. Some simply want to build services; whereas, others may find services as natural architectural decision for particular systems. Whatever the reason might be, services are commonly used in building wide range of systems. Developers often encapsulates various functionality (small or big) within one or more services, and expose them for multiple applications. Sometimes from day one (and definitely over time) these services may evolve into a set of black boxes. Services or not, black boxes or not, issues and exceptions are sometimes hard to avoid, especially in highly evolving and transactional systems. We can try to be methodical with our unit testing, QA and overall process; but we may not be able to avoid some type of system issues. When issues arise from one or more highly transactional services, it becomes necessary to resolve them very quickly. When systems handle thousands of transaction in matter of hours, some issues may not surface immediately. That is when service level logging becomes very useful. Technologies such as WCF, allow us to enable service level tracing with minimal effort; but that may not provide us with complete picture. Developers may need to add tracing within critical areas of the code with various degrees of verbosity. Programmer can always utilize some logging framework such as the 'Logging Application Block' to get the job done. It may seem overkill sometimes; but I have noticed from my experience that service level logging helps programmer trace many issues very quickly.

    Read the article

  • Online scoreboard in Python?

    - by CorundumGames
    So my friend and I are working on an arcade-style game in Python and Pygame. We're beginning to look at the feasibility of an online leaderboard, given our current programming backgrounds. Such a leaderboard would have the following requirements/features; The ability to search through demographics like region, country, platform, game mode, recentness ("best scores this month") and difficulty. (e.g. to make it possible for someone to say "I'm the best player in Italy!" or "I'm the best Linux player in South America!") Our game will not have online multiplayer, so no need to worry about that. We don't expect the game to be a million-dollar hit. We want the scores to be accessible both from in-game and the website. We would like some semblance of security to make sure no one plugs fake scores into the system. This is our present situation; Neither I nor my friend have any network programming background. All I really know is that sockets are low-level, HTTP is high-level. I happen to know that the Google App Engine might be useful for something like this, and I'm really thinking about going with that. We're not sure how we would store all the high score data. Our game will be free and open source (though we might keep the components that submit the high scores closed-source). Aside from all of this, we don't really have any idea where to begin. Any thoughts?

    Read the article

  • C#: String Concatenation vs Format vs StringBuilder

    - by James Michael Hare
    I was looking through my groups’ C# coding standards the other day and there were a couple of legacy items in there that caught my eye.  They had been passed down from committee to committee so many times that no one even thought to second guess and try them for a long time.  It’s yet another example of how micro-optimizations can often get the best of us and cause us to write code that is not as maintainable as it could be for the sake of squeezing an extra ounce of performance out of our software. So the two standards in question were these, in paraphrase: Prefer StringBuilder or string.Format() to string concatenation. Prefer string.Equals() with case-insensitive option to string.ToUpper().Equals(). Now some of you may already know what my results are going to show, as these items have been compared before on many blogs, but I think it’s always worth repeating and trying these yourself.  So let’s dig in. The first test was a pretty standard one.  When concattenating strings, what is the best choice: StringBuilder, string concattenation, or string.Format()? So before we being I read in a number of iterations from the console and a length of each string to generate.  Then I generate that many random strings of the given length and an array to hold the results.  Why am I so keen to keep the results?  Because I want to be able to snapshot the memory and don’t want garbage collection to collect the strings, hence the array to keep hold of them.  I also didn’t want the random strings to be part of the allocation, so I pre-allocate them and the array up front before the snapshot.  So in the code snippets below: num – Number of iterations. strings – Array of randomly generated strings. results – Array to hold the results of the concatenation tests. timer – A System.Diagnostics.Stopwatch() instance to time code execution. start – Beginning memory size. stop – Ending memory size. after – Memory size after final GC. So first, let’s look at the concatenation loop: 1: // build num strings using concattenation. 2: for (int i = 0; i < num; i++) 3: { 4: results[i] = "This is test #" + i + " with a result of " + strings[i]; 5: } Pretty standard, right?  Next for string.Format(): 1: // build strings using string.Format() 2: for (int i = 0; i < num; i++) 3: { 4: results[i] = string.Format("This is test #{0} with a result of {1}", i, strings[i]); 5: }   Finally, StringBuilder: 1: // build strings using StringBuilder 2: for (int i = 0; i < num; i++) 3: { 4: var builder = new StringBuilder(); 5: builder.Append("This is test #"); 6: builder.Append(i); 7: builder.Append(" with a result of "); 8: builder.Append(strings[i]); 9: results[i] = builder.ToString(); 10: } So I take each of these loops, and time them by using a block like this: 1: // get the total amount of memory used, true tells it to run GC first. 2: start = System.GC.GetTotalMemory(true); 3:  4: // restart the timer 5: timer.Reset(); 6: timer.Start(); 7:  8: // *** code to time and measure goes here. *** 9:  10: // get the current amount of memory, stop the timer, then get memory after GC. 11: stop = System.GC.GetTotalMemory(false); 12: timer.Stop(); 13: other = System.GC.GetTotalMemory(true); So let’s look at what happens when I run each of these blocks through the timer and memory check at 500,000 iterations: 1: Operator + - Time: 547, Memory: 56104540/55595960 - 500000 2: string.Format() - Time: 749, Memory: 57295812/55595960 - 500000 3: StringBuilder - Time: 608, Memory: 55312888/55595960 – 500000   Egad!  string.Format brings up the rear and + triumphs, well, at least in terms of speed.  The concat burns more memory than StringBuilder but less than string.Format().  This shows two main things: StringBuilder is not always the panacea many think it is. The difference between any of the three is miniscule! The second point is extremely important!  You will often here people who will grasp at results and say, “look, operator + is 10% faster than StringBuilder so always use StringBuilder.”  Statements like this are a disservice and often misleading.  For example, if I had a good guess at what the size of the string would be, I could have preallocated my StringBuffer like so:   1: for (int i = 0; i < num; i++) 2: { 3: // pre-declare StringBuilder to have 100 char buffer. 4: var builder = new StringBuilder(100); 5: builder.Append("This is test #"); 6: builder.Append(i); 7: builder.Append(" with a result of "); 8: builder.Append(strings[i]); 9: results[i] = builder.ToString(); 10: }   Now let’s look at the times: 1: Operator + - Time: 551, Memory: 56104412/55595960 - 500000 2: string.Format() - Time: 753, Memory: 57296484/55595960 - 500000 3: StringBuilder - Time: 525, Memory: 59779156/55595960 - 500000   Whoa!  All of the sudden StringBuilder is back on top again!  But notice, it takes more memory now.  This makes perfect sense if you examine the IL behind the scenes.  Whenever you do a string concat (+) in your code, it examines the lengths of the arguments and creates a StringBuilder behind the scenes of the appropriate size for you. But even IF we know the approximate size of our StringBuilder, look how much less readable it is!  That’s why I feel you should always take into account both readability and performance.  After all, consider all these timings are over 500,000 iterations.   That’s at best  0.0004 ms difference per call which is neglidgable at best.  The key is to pick the best tool for the job.  What do I mean?  Consider these awesome words of wisdom: Concatenate (+) is best at concatenating.  StringBuilder is best when you need to building. Format is best at formatting. Totally Earth-shattering, right!  But if you consider it carefully, it actually has a lot of beauty in it’s simplicity.  Remember, there is no magic bullet.  If one of these always beat the others we’d only have one and not three choices. The fact is, the concattenation operator (+) has been optimized for speed and looks the cleanest for joining together a known set of strings in the simplest manner possible. StringBuilder, on the other hand, excels when you need to build a string of inderterminant length.  Use it in those times when you are looping till you hit a stop condition and building a result and it won’t steer you wrong. String.Format seems to be the looser from the stats, but consider which of these is more readable.  Yes, ignore the fact that you could do this with ToString() on a DateTime.  1: // build a date via concatenation 2: var date1 = (month < 10 ? string.Empty : "0") + month + '/' 3: + (day < 10 ? string.Empty : "0") + '/' + year; 4:  5: // build a date via string builder 6: var builder = new StringBuilder(10); 7: if (month < 10) builder.Append('0'); 8: builder.Append(month); 9: builder.Append('/'); 10: if (day < 10) builder.Append('0'); 11: builder.Append(day); 12: builder.Append('/'); 13: builder.Append(year); 14: var date2 = builder.ToString(); 15:  16: // build a date via string.Format 17: var date3 = string.Format("{0:00}/{1:00}/{2:0000}", month, day, year); 18:  So the strength in string.Format is that it makes constructing a formatted string easy to read.  Yes, it’s slower, but look at how much more elegant it is to do zero-padding and anything else string.Format does. So my lesson is, don’t look for the silver bullet!  Choose the best tool.  Micro-optimization almost always bites you in the end because you’re sacrificing readability for performance, which is almost exactly the wrong choice 90% of the time. I love the rules of optimization.  They’ve been stated before in many forms, but here’s how I always remember them: For Beginners: Do not optimize. For Experts: Do not optimize yet. It’s so true.  Most of the time on today’s modern hardware, a micro-second optimization at the sake of readability will net you nothing because it won’t be your bottleneck.  Code for readability, choose the best tool for the job which will usually be the most readable and maintainable as well.  Then, and only then, if you need that extra performance boost after profiling your code and exhausting all other options… then you can start to think about optimizing.

    Read the article

  • You Might Be a SharePoint Professional If&hellip;

    - by Mark Rackley
    I really think no explanation is needed. Hope this makes you smile.. Thanks again for being an awesome SharePoint community! If you can only dream about working an 8 hour day, there’s a good chance you are a SharePoint professional. You might be a SharePoint professional if the last time you heard “Old MacDonald Had a Farm” you wondered “How many web front ends does it have?” If you consider Twitter the best form of support since the dawn of the Internet, you might be a SharePoint professional. If you are giddy-as-a-school-girl excited about going to Anaheim in October and it has NOTHING to do with Disneyland, you might be a SharePoint professional. You might be a SharePoint professional if you own more SharePoint shirts than you do pairs of underwear. If you’ve thought of giving up a career in the IT world for a job taking orders at a fast food chain, you might be a SharePoint professional. You might be a SharePoint professional if the only people who understand the words that come out of your mouth are other SharePoint people. If you put the word “Share” or “SP” in front of EVERYTHING (ShareFood, SPRunner, etc… etc…) then you might be a SharePoint professional. You are probably a SharePoint professional if you love SharePoint.. you hate SharePoint… you love SharePoint… you hate SharePoint… If the only thing you’d rather do more than SharePoint is SharePint, then you are definitely a SharePoint professional. You might be a SharePoint professional if your idea of name dropping is “Andrew Connell says…” or “According to Todd Klindt”… or even “Well, when I was stuck in a Turkish prison with Joel Oleson…”

    Read the article

  • Professionalism of online username / handle

    - by Thanatos
    I have in the past, and continue currently, used the handle "thanatos" on a lot of Internet sites, and if that isn't available (which happens ~50% of the time), "deathanatos". "Thanatos" is the name of the Greek god or personification of death (not to be confused with Hades, the Greek god of the underworld). "Dea" is a natural play-on-words to make the handle work in situations where the preferred handle has already been taken, without having to resort to numbers and remaining pronounceable. I adopted the handle many years ago — at the time, I was reading Edith Hamilton's Mythology, and Piers Anthony's On a Pale Horse, both still favorites of mine, and the name was born out of that. When I created the handle, I was fairly young, and valued privacy while online, not giving out my name. As I've become a more competent programmer, I'm starting to want to release some of my private works under FOSS licenses and such, and sometimes under my own name. This has started to tie this handle with my real name. I've become increasingly aware of my "web image" in the last few years, as I've been job hunting. As a programmer, I have a larger-than-average web presence, and I've started to wonder: Is this handle name professional? Does a handle name matter in a professional sense? Should I "rebrand"? (While one obviously wants to avoid hateful or otherwise distasteful names, is a topic such as "death" (to which my name is tied) proper? What could be frowned upon?) To try to make this a bit more programmer specific: Programmers are online — a lot — and some of us (and some who are not us) tend to put emphasis on a "web presence". I would argue that a prudent programmer (or anyone in an occupation that interacts online a lot) would be aware of their web presence. While not strictly limited to just programmers, for better or worse, it is a part of our world.

    Read the article

  • What I&rsquo;m Reading &ndash; 2 &ndash; Microsoft Silverlight 4 Data and Services Cookbook

    - by Dave Campbell
    A while back I mentioned that I had a couple books on my desktop that I’ve been “shooting holes” in … in other words, reading pieces that are interesting at the time, or looking something up rather than starting at the front and heading for the back. The book I want to mention today is Microsoft Silverlight 4 Data and Services Cookbook : by Gill Cleeren and Kevin Dockx. As opposed to the authors of the last book I reviewed, I don’t personally know Gill or Kevin, but I’ve blogged a lot of their articles… both prolific and on-topic writers. The ‘recipe’ style of the book shouldn’t put you off. It’s more of the way the chapters are laid out than anything else and once you see one of them, you recognize the pattern. This is a great eBook to have around to open when you need to find something useful. As with the other PACKT book I talked about have the eBook because for technical material, at least lately, I’ve gravitated toward that. I can have it with me on a USB stick at work, or at home. Read the free chapter then check out their blogs. You may be surprised by some of the items you’ll find inside the covers. One such nugget is one I don’t think I’ve seen blogged:  “Converting You Existing Applications to Use Silverlight”. Another good job! Technorati Tags: Silverlight 4

    Read the article

  • Asus Sonic Master on Asus N53SV

    - by David Winchester
    I have read that there's a problem to get the subwoofer working in these laptops. I tried this solution No sound from external subwoofer but I don't how to prove that the subwoofer is properly functioning. I use Pulseaudio equalizer and the bass sound seems to work fine, but when I go to the Sound Settings, I can't move the bar where it says 'Subwoofer' in my sound card option, so I don't know if everything is alright. If someone has a solution I would like to know, because there isn't much information regarding this. By the way, I'm using Ubuntu 12.04 64 bits. Thanks beforehand, Dave EDIT ----------- Possible Solution Well, I will post a solution that worked for me and I think it will help a lot of users. I finally got the subwoofer working. Besides adding in /etc/modprobe.d/alsa-base.conf the line options snd-hda-intel model=asus-mode4 I deleted the lines with load-module module-combine and module-combine-sink in /etc/pulse/default.pa (in the home folder there's also a ~/.pulse/default.pa file, I don't know if it has the lines too) To assure all the channels are working, I think this command tells me that speaker-test -c6 -l1 -twav I use pulseaudio-equalizer and the bass sounds very well when properly adjusted. Also, all the channels seems to work fine and the sound is even better than in Windows (where I don't have an equalizer). I pointed out before a module-combine and module-combine-sink problem, because one day I turned on my laptop and pulseaudio didn't work. So I deleted the lines with that names (don't know if they came by default, maybe I added them sometime when I was trying to fix my speakers). After all this, I can now move the Subwoofer bar in the Sound configuration. Anyways, the Equalizer does a great job and it improves the sound a lot.

    Read the article

  • SQL Sharding and SQL Azure&hellip;

    - by Dave Noderer
    Herve Roggero has just published a paper that outlines patterns for scaling using SQL Azure and the Blue Syntax (he and Scott Klein’s company) sharding api. You can find the paper at: http://www.bluesyntax.net/files/EnzoFramework.pdf Herve and Scott have also just released an Apress book Pro SQL Azure. The idea of being able to split (shard) database operations automatically and control them from a web based management console is very appealing. These ideas have been talked about for a long time and implemented in thousands of very custom ways that have been costly, complicated and fragile. Now, there is light at the end of the tunnel. Scaling database access will become easier and move into the mainstream of application development. The main cost is using an api whenever accessing the database. The api will direct the query to the correct database(s) which may be located locally or in the cloud. It is inevitable that the api will change in the future, perhaps incorporated into a Microsoft offering. Even if this is the case, your application has now been architected to utilize these patterns and details of the actual api will be less important. Herve does a great job of laying out the concepts which every developer and architect should be familiar with!

    Read the article

  • How to structure a XML-based order form using ASP.NET

    - by Brendan
    First question here; please help me if I'm doing something wrong. I'm a graphic designer who's trying to teach himself ASP.NET/C#. My server-side background is PHP/WordPress and some ASP Classic, and when I do code I've hand-coded just about everything since I started learning HTML. So, as I've started to learn .NET, my code has been very manual and procedural. I'm now trying to create a really basic order form that pulls from an XML file to populate the form; there's an image, a title, a price, and selectable quantities. If I was making this form as a static HTML file, I'd have each field named manually and so on postback I could query each field to get the values. But I'm trying to do this dynamically so that I can add/remove items from the form and not have to change the code. In terms of displaying the XML, I rolled my own by loading XmlDocument and using XmlNodeList and a bunch of foreach loops to get things displayed. Then, I learned about <asp:XmlDataSource> and <asp:Repeater>, which made displaying the XML simpler by a large margin. However, I've had a really hard time getting the data that's been submitted on postback (it was implied on SO that there are better ways to get data than nested RepeaterItems). So, what I've learned so far is that you can do things a bunch of different ways in .NET. that's why I thought it'd be good to ask for answers regarding the best way to use ASP.NET to display a XML document and dynamically capture the data that's submitted. Any help is appreciated! I'm using Notepad++ to code .NET 2.0.

    Read the article

  • Recover Data Like a Forensics Expert Using an Ubuntu Live CD

    - by Trevor Bekolay
    There are lots of utilities to recover deleted files, but what if you can’t boot up your computer, or the whole drive has been formatted? We’ll show you some tools that will dig deep and recover the most elusive deleted files, or even whole hard drive partitions. We’ve shown you simple ways to recover accidentally deleted files, even a simple method that can be done from an Ubuntu Live CD, but for hard disks that have been heavily corrupted, those methods aren’t going to cut it. In this article, we’ll examine four tools that can recover data from the most messed up hard drives, regardless of whether they were formatted for a Windows, Linux, or Mac computer, or even if the partition table is wiped out entirely. Note: These tools cannot recover data that has been overwritten on a hard disk. Whether a deleted file has been overwritten depends on many factors – the quicker you realize that you want to recover a file, the more likely you will be able to do so. Our setup To show these tools, we’ve set up a small 1 GB hard drive, with half of the space partitioned as ext2, a file system used in Linux, and half the space partitioned as FAT32, a file system used in older Windows systems. We stored ten random pictures on each hard drive. We then wiped the partition table from the hard drive by deleting the partitions in GParted. Is our data lost forever? Installing the tools All of the tools we’re going to use are in Ubuntu’s universe repository. To enable the repository, open Synaptic Package Manager by clicking on System in the top-left, then Administration > Synaptic Package Manager. Click on Settings > Repositories and add a check in the box labelled “Community-maintained Open Source software (universe)”. Click Close, and then in the main Synaptic Package Manager window, click the Reload button. Once the package list has reloaded, and the search index rebuilt, search for and mark for installation one or all of the following packages: testdisk, foremost, and scalpel. Testdisk includes TestDisk, which can recover lost partitions and repair boot sectors, and PhotoRec, which can recover many different types of files from tons of different file systems. Foremost, originally developed by the US Air Force Office of Special Investigations, recovers files based on their headers and other internal structures. Foremost operates on hard drives or drive image files generated by various tools. Finally, scalpel performs the same functions as foremost, but is focused on enhanced performance and lower memory usage. Scalpel may run better if you have an older machine with less RAM. Recover hard drive partitions If you can’t mount your hard drive, then its partition table might be corrupted. Before you start trying to recover your important files, it may be possible to recover one or more partitions on your drive, recovering all of your files with one step. Testdisk is the tool for the job. Start it by opening a terminal (Applications > Accessories > Terminal) and typing in: sudo testdisk If you’d like, you can create a log file, though it won’t affect how much data you recover. Once you make your choice, you’re greeted with a list of the storage media on your machine. You should be able to identify the hard drive you want to recover partitions from by its size and label. TestDisk asks you select the type of partition table to search for. In most cases (ext2/3, NTFS, FAT32, etc.) you should select Intel and press Enter. Highlight Analyse and press enter. In our case, our small hard drive has previously been formatted as NTFS. Amazingly, TestDisk finds this partition, though it is unable to recover it. It also finds the two partitions we just deleted. We are able to change their attributes, or add more partitions, but we’ll just recover them by pressing Enter. If TestDisk hasn’t found all of your partitions, you can try doing a deeper search by selecting that option with the left and right arrow keys. We only had these two partitions, so we’ll recover them by selecting Write and pressing Enter. Testdisk informs us that we will have to reboot. Note: If your Ubuntu Live CD is not persistent, then when you reboot you will have to reinstall any tools that you installed earlier. After restarting, both of our partitions are back to their original states, pictures and all. Recover files of certain types For the following examples, we deleted the 10 pictures from both partitions and then reformatted them. PhotoRec Of the three tools we’ll show, PhotoRec is the most user-friendly, despite being a console-based utility. To start recovering files, open a terminal (Applications > Accessories > Terminal) and type in: sudo photorec To begin, you are asked to select a storage device to search. You should be able to identify the right device by its size and label. Select the right device, and then hit Enter. PhotoRec asks you select the type of partition to search. In most cases (ext2/3, NTFS, FAT, etc.) you should select Intel and press Enter. You are given a list of the partitions on your selected hard drive. If you want to recover all of the files on a partition, then select Search and hit enter. However, this process can be very slow, and in our case we only want to search for pictures files, so instead we use the right arrow key to select File Opt and press Enter. PhotoRec can recover many different types of files, and deselecting each one would take a long time. Instead, we press “s” to clear all of the selections, and then find the appropriate file types – jpg, gif, and png – and select them by pressing the right arrow key. Once we’ve selected these three, we press “b” to save these selections. Press enter to return to the list of hard drive partitions. We want to search both of our partitions, so we highlight “No partition” and “Search” and then press Enter. PhotoRec prompts for a location to store the recovered files. If you have a different healthy hard drive, then we recommend storing the recovered files there. Since we’re not recovering very much, we’ll store it on the Ubuntu Live CD’s desktop. Note: Do not recover files to the hard drive you’re recovering from. PhotoRec is able to recover the 20 pictures from the partitions on our hard drive! A quick look in the recup_dir.1 directory that it creates confirms that PhotoRec has recovered all of our pictures, save for the file names. Foremost Foremost is a command-line program with no interactive interface like PhotoRec, but offers a number of command-line options to get as much data out of your had drive as possible. For a full list of options that can be tweaked via the command line, open up a terminal (Applications > Accessories > Terminal) and type in: foremost –h In our case, the command line options that we are going to use are: -t, a comma-separated list of types of files to search for. In our case, this is “jpeg,png,gif”. -v, enabling verbose-mode, giving us more information about what foremost is doing. -o, the output folder to store recovered files in. In our case, we created a directory called “foremost” on the desktop. -i, the input that will be searched for files. This can be a disk image in several different formats; however, we will use a hard disk, /dev/sda. Our foremost invocation is: sudo foremost –t jpeg,png,gif –o foremost –v –i /dev/sda Your invocation will differ depending on what you’re searching for and where you’re searching for it. Foremost is able to recover 17 of the 20 files stored on the hard drive. Looking at the files, we can confirm that these files were recovered relatively well, though we can see some errors in the thumbnail for 00622449.jpg. Part of this may be due to the ext2 filesystem. Foremost recommends using the –d command-line option for Linux file systems like ext2. We’ll run foremost again, adding the –d command-line option to our foremost invocation: sudo foremost –t jpeg,png,gif –d –o foremost –v –i /dev/sda This time, foremost is able to recover all 20 images! A final look at the pictures reveals that the pictures were recovered with no problems. Scalpel Scalpel is another powerful program that, like Foremost, is heavily configurable. Unlike Foremost, Scalpel requires you to edit a configuration file before attempting any data recovery. Any text editor will do, but we’ll use gedit to change the configuration file. In a terminal window (Applications > Accessories > Terminal), type in: sudo gedit /etc/scalpel/scalpel.conf scalpel.conf contains information about a number of different file types. Scroll through this file and uncomment lines that start with a file type that you want to recover (i.e. remove the “#” character at the start of those lines). Save the file and close it. Return to the terminal window. Scalpel also has a ton of command-line options that can help you search quickly and effectively; however, we’ll just define the input device (/dev/sda) and the output folder (a folder called “scalpel” that we created on the desktop). Our invocation is: sudo scalpel /dev/sda –o scalpel Scalpel is able to recover 18 of our 20 files. A quick look at the files scalpel recovered reveals that most of our files were recovered successfully, though there were some problems (e.g. 00000012.jpg). Conclusion In our quick toy example, TestDisk was able to recover two deleted partitions, and PhotoRec and Foremost were able to recover all 20 deleted images. Scalpel recovered most of the files, but it’s very likely that playing with the command-line options for scalpel would have enabled us to recover all 20 images. These tools are lifesavers when something goes wrong with your hard drive. If your data is on the hard drive somewhere, then one of these tools will track it down! Similar Articles Productive Geek Tips Recover Deleted Files on an NTFS Hard Drive from a Ubuntu Live CDUse an Ubuntu Live CD to Securely Wipe Your PC’s Hard DriveReset Your Ubuntu Password Easily from the Live CDBackup Your Windows Live Writer SettingsAdding extra Repositories on Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Awe inspiring, inter-galactic theme (Win 7) Case Study – How to Optimize Popular Wordpress Sites Restore Hidden Updates in Windows 7 & Vista Iceland an Insurance Job? Find Downloads and Add-ins for Outlook Recycle !

    Read the article

  • Open Multiple Sites Without Reopening the Menus in Firefox

    - by Asian Angel
    Are you frustrated with having to reopen your menus for each website that you need or want to view? Now you can keep those menus open while opening multiple websites with the Stay-Open Menu extension for Firefox. Stay-Open Menu in Action You can start using the extension as soon as you have installed it…simply access your favorite links in the “Bookmarks Menu, Bookmarks Toolbar, Awesome Bar, or History Menu” and middle click on the appropriate entries. Here you can see our browser opening the Productive Geek website and that the “Bookmarks Menu” is still open. As soon as you left click on a link or click outside the menus they will close normally like before. Note: Middle clicked links open in new tabs. The only time during our tests that a newly opened link “remained in the background” was for any links opened from the “Awesome Bar”. But as soon as the “Awesome Bar” was closed the new tabs automatically focused to the front. A link being opened from the “History Menu”…still open while the webpage is loading. Options The options are simple to sort through…enable or disable the additional “stay open” functions and enable automatic menu closing if desired. Conclusion If you get frustrated with having to reopen menus to access multiple webpages at one time then you might want to give this extension a try. Links Download the Stay-Open Menu extension (Mozilla Add-ons) Similar Articles Productive Geek Tips Make Firefox Use Multiple Rows of TabsDisable Web Site Window Resizing in FirefoxQuick Hits: 11 Firefox Tab How-TosPrevent Annoying Websites From Messing With the Right-Click Menu in FirefoxJatecblog Moves to How-To Geek Blogs (Linux Readers Should Subscribe) TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional StockFox puts a Lightweight Stock Ticker in your Statusbar Explore Google Public Data Visually The Ultimate Excel Cheatsheet Convert the Quick Launch Bar into a Super Application Launcher Automate Tasks in Linux with Crontab Discover New Bundled Feeds in Google Reader

    Read the article

< Previous Page | 385 386 387 388 389 390 391 392 393 394 395 396  | Next Page >