Search Results

Search found 12013 results on 481 pages for 'dvd drive'.

Page 389/481 | < Previous Page | 385 386 387 388 389 390 391 392 393 394 395 396  | Next Page >

• Windows 7 File Transfer Speed over Gigabit is slow

  - by Adam Haile

  I've got windows 7 pro running on my file server and my main desktop. Each has a gigabit network connection and I'm connected to a gigabit switch. However, when trying to copy some large files, it's running pretty slow at a measly 12-15 MB/s The data is coming from a 7200RPM SATA drive (which I think should be good for almost 150MB/s) and going to a Drobo on the server connected via FireWire 800, so I can't think of any bottlenecks I might have in the hardware. But TeraCopy still says it's only going at 12-15 MB/s What else could be wrong here?

  Read the article

• I tried installing Ubuntu 10.04 and I got this message - any ideas on what to do?

  - by vette982

  No root file system defined. Please correct this from the partition menu. This message shows up when I first boot into Ubuntu after the installation. I installed it by mounting the ISO with Daemon Tools, and I just did the default Wubi installation. I keep reading everywhere that I need to choose my installation directory, but I don't get any option to do that. These are all the options I get for installation directory. I have a C and D partition on my drive, and I tried installing it on both and no luck either way. Any ideas?

  Read the article

• Use `dd` linux program to save / recover a disk's MBR

  - by Graduate

  I have an Ubuntu OS installed on my laptop. I want to install Windows 7 as well to another disk partition (I will do it by recovering it from a special partition on my laptop). After installing Windows, I want to recover my hard drive MBR to be able to load Ubuntu. I have a plan to use linux dd program: 1) (Before installing, perform this command in Linux) dd if=/dev/sda of=/home/user/mbr_backup bs=512 count=1 2) (after installing, load Ubuntu Live CD and launch this) dd if=/home/user/mbr_backup of=/dev/sda bs=512 count=1 3) Load Ubuntu on PC and re-configure the GRUB2 to be able start Windows I need your advice, I want to be sure I won't damage the disk (it's partition table).

  Read the article

• Windows XP: How to boot up in normal mode after improper shut down?

  - by Nick

  I work in two different locations and whenever there is a power outage at one of the locations, Windows XP detects that the system was improperly shutdown. Once the power is up, the PC powers on and Windows XP enters REPAIR/SAFE mode where only someone physically in front of the PC can control it. (Networking is all disabled in this mode) Now before it enters REPAIR/SAFE mode, there is an option for a NORMAL boot. But the catch is that REPAIR/SAFE mode is selected by default with a 30 second timer. Once it automatically enters REPAIR/SAFE mode and if nobody is at the other location, I have no way to remote control it anymore. And then I have to drive over to the other location and reboot it and select boot into NORMAL mode. Where can I change this setting so that Windows XP always boots into NORMAL mode no matter how many times it is improperly shut down?

  Read the article

• How do I define multiple urls for svn project?

  - by yarun can

  I am working on a project in mixed environment (win, cygwin, linux) which is on a "shared ntfs drive". I am the sole user there for this project is not really duplicated for multiple users. The main issue I am facing is that the original svn project import was done with a cygwin path like "/cygdrive/z/path to svn project". Now when I am on win svn or linux svn this does not work with svn since such paths do not exists for those versions. Is there a way to define more than one path for the svn import, like maybe some kind of configuration that i can use to fire on the command line? thanks

  Read the article

• Why can't I open programs after watching youtube videos for a while?

  - by manjivsanotsu

  I have recently built a new PC, and it worked fine for a while (1-2 months of no problems whatsoever). However in the recent weeks I noticed that after I watched some youtube videos and closed everything, I can no longer do anything except move the mouse and expand the Startup Menu. If I click on any of the programs on the Start Menu or type a program on the Run text box, it won't open anything. I can't open taskmgr, or windows explorer, or even shut down the PC. I don't have anything else running when I'm watching videos except ZoneAlarm and Avast. The only workaround I can do when this happens is a forced shutdown (holding the power button of my PC), and restart if I wanted to do anything more. But this happens a lot - about 4-5 times a week so I'm worried it would fry up my hardware if I keep on doing this. OS: Windows 7 Other Installed Software: Open Office, Tropico 4 game, Adobe Photoshop Browser used: Google Chrome Hardware: CPU: i7 2600K RAM: 16 GB Motherboard: Asus P8Z68-V GEN3 Hard Drive: 120GB Corsair Force GT SSD Graphics: 2047MB GeForce GTX 560 Ti

  Read the article

• Resizing 2 partitions (NTFS and ReiserFS3)

  - by steven

  When creating a Win7 and Gentoo setup I miss allocated the space needed for Windows and Linux. I have a 320 gb drive and created a 40gb partition on Win7 and used the rest of the space on Linux. Now I need about 70gbs on the NTFS partition. Are there any tools that will shrink the ReiserFS3 partition? (It is using about 80gbs and has the reset free), while growing the NTFS partition? If I have to clone, does the tool copy freespace inside the image? I would prefer this not happen as that I'm sort on backup space. [I can handle a 100-150gb of images, but I can't copy the entire HD]

  Read the article

• Clean Install: Ubuntu 8.04, 10.04 or somthing else?

  - by Robert S. Barnes

  I'm faced with a pending clean install due to a dying hard drive in my old Dell Inspiron 8600 laptop. I've been running Ubuntu 8.04 on it since... 8.04 and I've been more or less happy with it except that it's a PITA to recompile the kernel or do any other kernel related work. I mostly do software dev on it, gcc, gvim, c/c++/perl/php/mysql and running vmware server 2.0. I've heard mixed reviews of 10.04, and am wondering what to put on the new HD. I'm even considering just sticking with 8.04 as it seems to mostly meet my needs. Any suggestions?

  Read the article

• Pull/push student assignment files from computer lab computers (Windows 7)

  - by mkstreet

  I have a computer lab with about 35 PC's all running Windows 7. The students do their work and save it on the D-drive in a particular folder such as a folder with the same name as the computer's name (e.g. LABPC001). I'd like a centralized way to pull all these folders in to the teacher's computer in the lab to check the assignments. It would be best if this didn't involve using an external website (e.g. Dropbox). I would also like to be able to distribute (send) files to the students in these same folders. I've seen software applications that do this but they cost about US$1000 which is far beyond our means. Suggestions for free, or almost free, best ways to set this up?

  Read the article

• How do I run perfmon against a remote machine?

  - by WindyCityEagle

  For starters I'm trying to do this from a Windows 7 box to a Windows 7 box. I know the simple answer should be to enter \\computername where it says "Select Counters From Computer". Trouble is, every time I do that I get an error message that says "Unable to connect to machine" I know the machine is out there and accessible, because I can bring up windows explorer and enter \\computername\c$ in the explorer bar and then can browse their c drive. So the machine is out there. Are there special permissions for perfmon? Is here a service which needs to be running on the remote machine?

  Read the article

• I tried installing Ubuntu 10.04 and I got this message - any ideas on what to do?

  - by user41926

  No root file system defined. Please correct this from the partition menu. This message shows up when I first boot into Ubuntu after the installation. I installed it by mounting the ISO with Daemon Tools, and I just did the default Wubi installation. I keep reading everywhere that I need to choose my installation directory, but I don't get any option to do that. These are all the options I get for installation directory. I have a C and D partition on my drive, and I tried installing it on both and no luck either way. Any ideas?

  Read the article

• Windows XP crashes by GT610 driver (nv4_disp)

  - by undone

  I have a PC which was working fine but one day screen went dark and nothing was shown. I thought the problem is graphic card, so I replaced it with new one. I bought a new graphic card (GeForce 610) and installed it on my system. I formatted my hard-drive and installed a fresh Windows XpSp3 and its drivers. Everything was fine but after installing graphic card's driver, I got an error saying windows got stuck in an infinite loop and it couldn't get out (in nv4_disp). I uninstalled it and downloaded its last version and installed it. Unfortunately, I got the same error and windows restated! Here's my system: Pascal Motherboard PT880PRO Intel CPU Windows XPSp3 I searched this issue on the internet and I found bunch of suggestions (from cleaning hardware to installing latest version of its driver) but nothing help! Any help would be appreciated! Thanks.

  Read the article

• How do I determine if an unbootable copy of Windows is a 64-bit or 32-bit installation?

  - by svnpenn

  I need to reinstall Windows on a laptop. I have the product key (its on the laptop), and I know it is Windows 7 Home Premium. I need a way to determine if 64-bit or 32-bit Windows is installed, so that I can download the correct one from Microsoft. The computer is messed up so I do not have access to Windows to check it with systeminfo. I took out the hard drive and hooked it to another computer, but when I run systeminfo it just gives information for the host computer, I did not see a way to change this.

  Read the article

• Moving to an SSD with Windows 7

  - by Nick Gerakines

  Disclaimer: I've been digging around for a few days and didn't get what I was looking for in terms of answers, so I'm asking here. I've recently purchased an 80g SSD drive to use as my boot up and OS parition. I've got a windows 7 desktop with two 1TB (raid0) disks currently and I'm not sure where to start in terms of copying / moving the OS. I suppose that doing a fresh install isn't out of the question, but I've got an upgrade disk from Vista that I'd have to deal with. Where do I begin?

  Read the article

• How to prevent Windows 8 of erasing GRUB?

  - by dirleyrls

  I'm doing dualboot with Ubuntu and Windows 8 on my DELL Laptop. EFI is enabled, secure boot is not. My partitions are GPT. Everything seems to work for some time. After some normal use, GRUB stops working. The "ubuntu" EFI entry is still there on top of everything else. But the computer boots directly into the Windows Bootloader, skipping GRUB. Any clues on why is that happening or how can I prevent that? My current partiton setup is: - /dev/sda1 NTFS Windows recovery - /dev/sda2 FAT32 UEFI boot (with boot flag) - /dev/sda3 unknown (msftres flag) - /dev/sda4 NTFS Windows Drive C - /dev/sda5 ext4 /home - /dev/sda6 ext4 / I usually reinstall GRUB through chrooting from a Live Session and doing a apt-get install --reinstall grub-efi-amd64.

  Read the article

• Multi-machine backup solutions

  - by Paul

  I have a growing number of PCs and laptops in my home that need a backup solution. My question is 2 fold: Most commercial backup vendors appear to license by the machine, are there any products that give a license that can be used on all your machines, without a per machine cost? An alternative is to have a centrally controlled back up strategy controlled from a single PC with an attached hard drive that can back up other machines on the network. What backup software is suitable for this approach? Will this software be windows/Linux interoperable? I've searched for duplicate questions but don't see anything that addresses the multi machine/cost issue. OSs in network will be Windows (XP, Vista, 7) and Linux variants. Not pattern to when machines will be switched on.

  Read the article

• Trouble loading an ISO

  - by crocyson

  I've created a boot disk and ISO image with paragon. I boot up the Virtual pc with the disk in and I get to my recovery page. When I am supposed to select an ISO image? My Virtual PC doesn't acknowledge any of my physical hard drives on my host PC. I've also tried copy/paste the files into my datastore and they do not show up. I've tried the option during the set up to start with the ISO but again I am not able to browse to my external hard drive that I have stored the ISO on. VMWare will acknowledge it and say that it is connected but I can't browse to it. Am I doing something wrong? I created the back up disk and ISO image on the external with paragon.

  Read the article

• Cloud storage services offering one-time download links? [closed]

  - by TARehman

  Is anyone aware of consumer-targeted cloud storage services that allow users to generate a one-time download link for hosted files? Case in point: I have an encrypted container with some documents I need to send to a vendor. I would prefer to give them a one-time download link, so that I know when they have accessed the file, and then inform them of the passphrase by phone. I have heard that MediaFire offers 1-time links, but that they are buried in tons of advertising. At the moment, I'm not sure that I consider MediaFire fully legitimate; I'm more interested in solutions with Google Drive, Box.net, DropBox, etc.

  Read the article

• Issues With IIS Hosting Two Domains From Same Folder

  - by Bob Mc

  I have two different domain names that resolve to the same ASP.Net site. Both domains are hosted on the same server, which runs Windows Server 2003 and IIS6. The sites are differentiated in IIS Manager using host headers. However, both of the sites point to the same folder on the local drive for the site's page files. I am occasionally experiencing an ASP.Net error that says "The state information is invalid for this page and might be corrupted." I'm the site developer so I've addressed all the relevant code-related causes for this issue. However, I was wondering whether having two domains/sites sharing the same folder for an ASP.Net application might be causing this intermittent error. Also, is this generally a bad practice? Should I make separate, duplicate folders for each of the domains? Seems like that can become a maintenance headache.

  Read the article

• Booting drops to EFI shell but boots normally if exit'ed

  - by wittybear

  (first post here... I'm normally on stackoverflow) I'm booting an Intel ME 5788 board which uses EFI (a replacement for BIOS). On boot it drops out to the EFI Shell and the 'map' shows the drive as a blockdevice but there is no filesystem device mapped. If I just type 'exit' it boots normally to windows 7 and the configuration (using bcdedit.exe) looks fine. I'm confused - surely if its not been able to map the blockdevice as a filesystem device it should not boot? I would like to be able to get the boot to proceed without my interaction - does anyone know how to do it? (Also there is no Boot Manager options available in the shell, i.e. autoboot, bcfg etc)

  Read the article

• Sharing a symlinked (`mklink /d`) directory via SMB?

  - by Alois Mahdal

  I have a Windows 7 amd64 box where one directory is shared: local path is d:\drop\ remote path is \\aloism\drop from SMB point of view, Everyone has Read and Write permission ACLs for the folder are set so that all authenticated users have read and write permissions:NT AUTHORITY\Authenticated Users:(OI)(CI)C (which is inherited to all levels below) Now I create a symbolic link within the structure of the directory: D:\drop>mklink /d tools2 tools symbolic link created for tools2 <<===>> tools The problem is that I can't access this new directory from any of the remote machines (a Windows 7 box and a Windows XP box—both behave the same way): C:\>dir \\aloism\drop\tools2\ Volume in drive \\aloism\drop is droot Volume Serial Number is FA73-1897 Directory of \\aloism\drop\tools2 File Not Found How can I make it work? Possibly also for files?

  Read the article

• can /usr/src be a sym link?

  - by lord.didger

  I want to store all source code of programs I have installed in /usr/src. However, due to size of the drive I made a sym link /usr/src that points to ~/src. That was nice. Unfortunately, that caused virtualbox-dkms to fail to build the virtualbox kernel module because of a symlink within the linux-headers-*-common. 'script' points to ./../lib/linux-kbuild-3.1/scripts what is fine in /usr/src directory but wrong in ~/src. Can I bypass this problem or the only solution is to store sources within the directory /usr/src?

  Read the article

• Computers with Small Capacity SSD - For caching?

  - by RXC

  Recently, in newsletters from websites, I have been seeing computers for sale from manufacturers that include an HDD and an SSD but the SSD has a small capacity like 24 GBs. I don't know if this still holds true, but I learned that when building a computer, you would want to install your OS on your fastest hard drive. I do a lot of PC gaming, so I install my OS and games on my SSD, because I learned that games and many applications make lots of system calls to the OS and performance can only be as fast as the slowest piece. Why these computers come with small capacity SSDs? Most OS's take up around 20 to 30 GBs of space, so what are the benefits of such a small SSD? Are these small size SSDs for caching? and what exactly does caching mean (what does it do and how does it help)?

  Read the article

• RAID 1 in ubuntu 12.04

  - by Bavly Hanna

  Right now I have a small file server to which I have loaded ubuntu 12.04 desktop on a small 160gb harddrive. This harddrive is the primary drive from which the OS boots. I want to move all my data to my file server so it can be shared on the network (contain in 2x2TB harddrives in my desktop. The 2TB drivers are in raid 1 (hardware). I simply want to move them to the file server and set it up so that they are in software raid 1. If at all possible I'd like to be able to do this without losing any info on the drives. I've searched around and the guides i find describe raiding drives for boot driver, but these wouldn't be boot drives just regular storage drives. If someone could tell me how to perform this or point me in the right direction it would be much appreciated.

  Read the article

• Lenovo N100 and Samsung SSD 830, shouldn't this go faster than 100MB/s?

  - by Jook

  I recently upgrated my Lenovo N100 0768 with a Samsung SSD 830 - specified to support 520 MB/s read and 320MB/s write. However, having only SATA1 with max. of 150MB/s speed, it has to run in a slower mode - of course. But, shouldn't it be more on the edge of this limit than ranging between 90-115MB/s and averaging around 103MB/s? Or is this really as much as I can expect? Tested with HD-Tach. Has anyone comparable results on a SATA1 controller with a SSD drive faster than SATA1? Preferably similar to the Samsung 830?

  Read the article

< Previous Page | 385 386 387 388 389 390 391 392 393 394 395 396  | Next Page >