Search Results

Search found 9954 results on 399 pages for 'mean'.

Page 389/399 | < Previous Page | 385 386 387 388 389 390 391 392 393 394 395 396  | Next Page >

• reloading page while an ajax request in progress gives empty response and status as zero

  - by Jayapal Chandran

  Hi, Browser is firefox 3.0.10 I am requesting a page using ajax. The response is in progress may be in readyState less than 4. In this mean time i am trying to reload the page. What happens is the request ends giving an empty response. I used alert to find what string has been given as response text. I assume that by this time the ready state 4 is reached. why it is empty string. when i alert the xmlhttpobject.status it displayed 0. when i alert the xmlhttpobject.statusText an exception occurs stating that NOT AVAILABLE. when i read in the document http://www.devx.com/webdev/Article/33024/0/page/2 it said for 3 and 4 status and statusText are available but when i tested only status is available but not satausText Here is a sample code. consider that i have requested a page and my callback function is as follows function cb(rt) { if(rt.readyState==4) { alert(rt.status); alert(rt.statusText); // which throws an exception } } and my server side script is as follows sleep(30); //flushing little drop down code besides these i noticed the following... assume again i am requesting the above script using ajax. now there will be an idle time till 30 seconds is over before that 30 seconds i press refresh. i got xmlhttpobject.status as 0 but still the browser did not reload the page untill that 30 seconds. WHY? so what is happening when i refresh a page before an ajax request is complete is the status value is set to zero and the ready state is set to 4 but the page still waits for the response from the server to end... what is happening... THE REASON FOR ME TO FACE SOME THING LIKE THIS IS AS FOLLOWS. when ever i do an ajax request ... if the process succeeded like inserting some thing or deleting something i popup a div stating that updated successfully and i will reload the page. but if there is any error then i do not reload the page instead i just alert that unable to process this request. what happens if the user reloads the page before any of this request is complete is i get an empty response which in my calculation is there is a server error. so i was debugging the ajax response to filter out that the connection has been interrupted because the user had pressed reload. so in this time i don't want to display unable to process this request when the user reloads the page before the request has been complete. oh... a long story. IT IS A LONG DESCRIPTION SO THAT I CAN MAKE EXPERTS UNDERSTAND MY DOUBT. so what i want form the above. any type of answer would clear my mind. or i would like to say all type of answers. EDIT: 19 dec. If i did not get any correct answer then i would delete this question and will rewrite with examples. else i will accept after experimenting.

  Read the article

• Explicit method tables in C# instead of OO - good? bad?

  - by FunctorSalad

  Hi! I hope the title doesn't sound too subjective; I absolutely do not mean to start a debate on OO in general. I'd merely like to discuss the basic pros and cons for different ways of solving the following sort of problem. Let's take this minimal example: you want to express an abstract datatype T with functions that may take T as input, output, or both: f1 : Takes a T, returns an int f2 : Takes a string, returns a T f3 : Takes a T and a double, returns another T I'd like to avoid downcasting and any other dynamic typing. I'd also like to avoid mutation whenever possible. 1: Abstract-class-based attempt abstract class T { abstract int f1(); // We can't have abstract constructors, so the best we can do, as I see it, is: abstract void f2(string s); // The convention would be that you'd replace calls to the original f2 by invocation of the nullary constructor of the implementing type, followed by invocation of f2. f2 would need to have side-effects to be of any use. // f3 is a problem too: abstract T f3(double d); // This doesn't express that the return value is of the *same* type as the object whose method is invoked; it just expresses that the return value is *some* T. } 2: Parametric polymorphism and an auxilliary class (all implementing classes of TImpl will be singleton classes): abstract class TImpl<T> { abstract int f1(T t); abstract T f2(string s); abstract T f3(T t, double d); } We no longer express that some concrete type actually implements our original spec -- an implementation is simply a type Foo for which we happen to have an instance of TImpl. This doesn't seem to be a problem: If you want a function that works on arbitrary implementations, you just do something like: // Say we want to return a Bar given an arbitrary implementation of our abstract type Bar bar<T>(TImpl<T> ti, T t); At this point, one might as well skip inheritance and singletons altogether and use a 3 First-class function table class /* or struct, even */ TDictT<T> { readonly Func<T,int> f1; readonly Func<string,T> f2; readonly Func<T,double,T> f3; TDict( ... ) { this.f1 = f1; this.f2 = f2; this.f3 = f3; } } Bar bar<T>(TDict<T> td; T t); Though I don't see much practical difference between #2 and #3. Example Implementation class MyT { /* raw data structure goes here; this class needn't have any methods */ } // It doesn't matter where we put the following; could be a static method of MyT, or some static class collecting dictionaries static readonly TDict<MyT> MyTDict = new TDict<MyT>( (t) => /* body of f1 goes here */ , // f2 (s) => /* body of f2 goes here */, // f3 (t,d) => /* body of f3 goes here */ ); Thoughts? #3 is unidiomatic, but it seems rather safe and clean. One question is whether there are any performance concerns with it. I don't usually need dynamic dispatch, and I'd prefer if these function bodies get statically inlined in places where the concrete implementing type is known statically. Is #2 better in that regard?

  Read the article

• "C variable type sizes are machine dependent." Is it really true? signed & unsigned numbers ;

  - by claws

  Hello, I've been told that C types are machine dependent. Today I wanted to verify it. void legacyTypes() { /* character types */ char k_char = 'a'; //Signedness --> signed & unsigned signed char k_char_s = 'a'; unsigned char k_char_u = 'a'; /* integer types */ int k_int = 1; /* Same as "signed int" */ //Signedness --> signed & unsigned signed int k_int_s = -2; unsigned int k_int_u = 3; //Size --> short, _____, long, long long short int k_s_int = 4; long int k_l_int = 5; long long int k_ll_int = 6; /* real number types */ float k_float = 7; double k_double = 8; } I compiled it on a 32-Bit machine using minGW C compiler _legacyTypes: pushl %ebp movl %esp, %ebp subl $48, %esp movb $97, -1(%ebp) # char movb $97, -2(%ebp) # signed char movb $97, -3(%ebp) # unsigned char movl $1, -8(%ebp) # int movl $-2, -12(%ebp)# signed int movl $3, -16(%ebp) # unsigned int movw $4, -18(%ebp) # short int movl $5, -24(%ebp) # long int movl $6, -32(%ebp) # long long int movl $0, -28(%ebp) movl $0x40e00000, %eax movl %eax, -36(%ebp) fldl LC2 fstpl -48(%ebp) leave ret I compiled the same code on 64-Bit processor (Intel Core 2 Duo) on GCC (linux) legacyTypes: .LFB2: .cfi_startproc pushq %rbp .cfi_def_cfa_offset 16 movq %rsp, %rbp .cfi_offset 6, -16 .cfi_def_cfa_register 6 movb $97, -1(%rbp) # char movb $97, -2(%rbp) # signed char movb $97, -3(%rbp) # unsigned char movl $1, -12(%rbp) # int movl $-2, -16(%rbp)# signed int movl $3, -20(%rbp) # unsigned int movw $4, -6(%rbp) # short int movq $5, -32(%rbp) # long int movq $6, -40(%rbp) # long long int movl $0x40e00000, %eax movl %eax, -24(%rbp) movabsq $4620693217682128896, %rax movq %rax, -48(%rbp) leave ret Observations char, signed char, unsigned char, int, unsigned int, signed int, short int, unsigned short int, signed short int all occupy same no. of bytes on both 32-Bit & 64-Bit Processor. The only change is in long int & long long int both of these occupy 32-bit on 32-bit machine & 64-bit on 64-bit machine. And also the pointers, which take 32-bit on 32-bit CPU & 64-bit on 64-bit CPU. Questions: I cannot say, what the books say is wrong. But I'm missing something here. What exactly does "Variable types are machine dependent mean?" As you can see, There is no difference between instructions for unsigned & signed numbers. Then how come the range of numbers that can be addressed using both is different? I was reading http://stackoverflow.com/questions/2511246/how-to-maintain-fixed-size-of-c-variable-types-over-different-machines I didn't get the purpose of the question or their answers. What maintaining fixed size? They all are the same. I didn't understand how those answers are going to ensure the same size.

  Read the article

• Is it possible to create the following XML using Xdocument and append the relevant protion in subseq

  - by Newbie

  <?xml version='1.0' encoding='UTF-8'?> <StockMarket> <StockDate Day = "02" Month="06" Year="2010"> <Stock> <Symbol>ABC</Symbol> <Amount>110.45</Amount> </Stock> <Stock> <Symbol>XYZ</Symbol> <Amount>366.25</Amount> </Stock> </StockDate> <StockDate Day = "03" Month="06" Year="2010"> <Stock> <Symbol>ABC</Symbol> <Amount>110.35</Amount> </Stock> <Stock> <Symbol>XYZ</Symbol> <Amount>369.70</Amount> </Stock> </StockDate> </StockMarket> My approach so far is XDocument doc = new XDocument( new XElement("StockMarket", new XElement("StockDate", new XAttribute("Day", "02"),new XAttribute("Month","06"),new XAttribute("Year","2010")), new XElement("Stock", new XElement("Symbol", "ABC"), new XElement("Amount", "110.45")) ) ); Since I am new to Linq to XML, I am presently struggling a lot and henceforth seeking for help. What I need is to generate the above XML programatically(I mean to say that some kind of looping...) The values will be passed from textbox and hence will be filled at runtime. At present the one which I have done is a kind of static one. This entire stuff has to be done at runtime. One more problem that I am facing is at the time of saving the record for the second time. Suppose first time I executed the code and saved it(Using the program I have done). Next time when I will try to save then only <StockDate Day = "xx" Month="xx" Year="xxxx"> <Stock> <Symbol>ABC</Symbol> <Amount>110.45</Amount> </Stock> <Stock> <Symbol>XYZ</Symbol> <Amount>366.25</Amount> </Stock> </StockDate> should get save(or better appended) and not <StockMarket> .... </StockMarket>.. Because that will be created only at the first time when the XML will be generated or created. I hope I am able to convey my problem properly. If you people is having difficulty in understanding my situation, kindly let me know. Using C#3.0 . Thanks

  Read the article

• [C#][Design] Appropriate programming design questions.

  - by Edward

  I have a few questions on good programming design. I'm going to first describe the project I'm building so you are better equipped to help me out. I am coding a Remote Assistance Tool similar to TeamViewer, Microsoft Remote Desktop, CrossLoop. It will incorporate concepts like UDP networking (using Lidgren networking library), NAT traversal (since many computers are invisible behind routers nowadays), Mirror Drivers (using DFMirage's Mirror Driver (http://www.demoforge.com/dfmirage.htm) for realtime screen grabbing on the remote computer). That being said, this program has a concept of being a client-server architecture, but I made only one program with both the functionality of client and server. That way, when the user runs my program, they can switch between giving assistance and receiving assistance without having to download a separate client or server module. I have a Windows Form that allows the user to choose between giving assistance and receiving assistance. I have another Windows Form for a file explorer module. I have another Windows Form for a chat module. I have another Windows Form form for a registry editor module. I have another Windows Form for the live control module. So I've got a Form for each module, which raises the first question: 1. Should I process module-specific commands inside the code of the respective Windows Form? Meaning, let's say I get a command with some data that enumerates the remote user's files for a specific directory. Obviously, I would have to update this on the File Explorer Windows Form and add the entries to the ListView. Should I be processing this code inside the Windows Form though? Or should I be handling this in another class (although I have to eventually pass the data to the Form to draw, of course). Or is it like a hybrid in which I process most of the data in another class and pass the final result to the Form to draw? So I've got like 5-6 forms, one for each module. The user starts up my program, enters the remote machine's ID (not IP, ID, because we are registering with an intermediary server to enable NAT traversal), their password, and connects. Now let's suppose the connection is successful. Then the user is presented with a form with all the different modules. So he can open up a File Explorer, or he can mess with the Registry Editor, or he can choose to Chat with his buddy. So now the program is sort of idle, just waiting for the user to do something. If the user opens up Live Control, then the program will be spending most of it's time receiving packets from the remote machine and drawing them to the form to provide a 'live' view. 2. Second design question. A spin off question #1. How would I pass module-specific commands to their respective Windows Forms? What I mean is, I have a class like "NetworkHandler.cs" that checks for messages from the remote machine. NetworkHandler.cs is a static class globally accessible. So let's say I get a command that enumerates the remote user's files for a specific directory. How would I "give" that command to the File Explorer Form. I was thinking of making an OnCommandReceivedEvent inside NetworkHandler, and having each form register to that event. When the NetworkHandler received a command, it would raise the event, all forms would check it to see if it was relevant, and the appropriate form would take action. Is this an appropriate/the best solution available? 3. The networking library I'm using, Lidgren, provides two options for checking networking messages. One can either poll ReadMessage() to return null or a message, or one can use an AutoResetEvent OnMessageReceived (I'm guessing this is like an event). Which one is more appropriate?

  Read the article

• What is the best free or low-cost Java reporting library (e.g. BIRT, JasperReports, etc.) for making

  - by Max3000

  I want to print, email and write to PDF very simple reports. The reports are basically a list of items, divided in various sections/columns. The sections are not necessarily identical. Think newspaper. I just wasted a solid 2 days of work trying to make this kind of reports using JasperReports. I find that Jasper is great for outputing "normalized" data. The kind that would come out of a database for instance, each row neatly describing an item and each item printed on a line. I'm simplifying a bit but that's the idea. However, given what I want to do I always ended up completely lost. Data not being displayed for no apparent reason, columns of texts never the correct size, column positioning always ending up incorrect, pagination not sanely possible (I was never able to figure it out; the FAQ gives an obscure workaround), etc. I came to the conclusion that Jasper is really not built to make the kind of reports I want. Am I missing something? I'm ready to pay for a tool, as long as the price is reasonable. By reasonable I mean a few $100s. Thanks. EDIT: To answer cetus, here is more information about the report I made in Jasper. What I want is something like this: text text text text ------------------- text | text text |---------- text | text text | text --------| text text |---------- text | text What I made in jasper is this: (detail band) subreport | subreport ------------------------------------ subreport | subreport ------------------------------------ subreport | subreport The subreports are all the same actual report. This report has one field (called "field") and basically just prints this field in a detail band. Hence, running a single subreport simply lists all items from the datasource. The datasource itself is a simple custom JRDatasource containing a collection of strings in the field "field". The datasource iterates over the collection until there are no more strings. Each subreport has its own datasource. I tried many different variations of the above, with all sorts of different properties for the report, subreports, etc. IMO, this is fairly simple stuff. However, the problems I encounter are as follows: Subreports starting from the 3rd don't show up when their position type is 'float'. They do show up when they have 'fix relative to top'. However, I don't want to do this because the first two subreports can be of any length. I can't make each subreport to stretch according to its own length. Instead, they either don't stretch at all (which is not desirable because they have different lenghts) or they stretch according to the longest subreport. This makes a weird layout for sure. Pagination doesn't happen. If some subreports fall outside the page, they simple don't show. One alternative is to increase the 'page height' considerably and the 'detail band height' accordingly. However, in this case it is not really possibly to know the total height in advance. So I'm stuck with calculating/guessing it myself, before the report is even generated. More importantly, long reports end up on one page and this is not acceptable (the printout text is too small, it's ugly/non-professional to have different reports with different PDF page lengths, etc.). BTW, I used iReport so it's possibly limitations of iReport I'm listing here and not of Jasper itself. That's one of the things I'm trying to find out asking this question here. One alternative would be to generate the jrxml myself with just static text but I'm afraid I'll encounter the very same limitations. Anyway, I just generally wasted so much time getting anything done with Jasper that I can't help thinking its not the right tool for the job. (Not to say that Jasper doesn't excel in what it's good at).

  Read the article

• How can I provide maximum integration between a calendar-like webapp and desktop calendar applicatio

  - by Joshua Carmody

  I've been assigned to upgrade/rewrite a webapp that my company uses to schedule conference calls. One of the goals of the upgrade is to improve integration between the application and our user's Outlook calendars (and ideally other calendar programs as well). At present, when a user is viewing the details of a scheduled conference call on the webapp, they can click an "Add to Outlook calendar" link, which points them to a dynamically generated .ical file. On most of our users' systems, Outlook opens the file by default, bringing up the "create calendar appointment" window with the concall information pre-populated. This link creates a 1-time appointment only, and has to be clicked on for each occurrence of the call. So if a call happened every Monday in June, you would have to click 4 links to add all the appointments to your calendar. This is the full extent of our current level of integration. Ideally, we will be able to upgrade the system so that users can "subscribe" to a con call, which would mean not just the current call, but all calls in a reoccurring series would appear in the user's calendar with a single click. If one call in a series was cancelled, or rescheduled, that call's appointment would change in the users' calendar, without the user having to do anything, and without upsetting the rest of the series' appointments. Also, any changes to the call's info (say, the phone number was changed) would automatically be updated in the Outlook calendars of anyone who subscribed, without them having to come back to the webapp to double-check that their information is up to date. Ideally this would also work with other popular calendar programs, as well as Google Calendar. I don't know if we'll be able to achieve that level of integration, but I'd like to get as close to that as we can. Additional details and challenges: We aren't running Exchange on a public server, and I'm not likely to be able to get that changed Assume that our users are basically "the general internet public". Our users are not members of our office's network, nor can they be. We can't set up network logins or Exchange accounts for them. Some of our users are not using Outlook, but some other calendar program. Of the ones that are using Outlook, not all are using the same version. We have users in more than 50 countries that are using this webapp. Synchronization would be one-directional. Nobody can make changes in their own calendars and expect the server to reflect them/replicate them to other users Current conference calling application is written in ColdFusion. Rewrite will probably be in ASP.NET, but I haven't confirmed that yet. Solutions that work with either or both technologies are appreciated. I know that .ical files can theoretically contain more than one event, but in my own experiments I haven't had success in getting Outlook (2003) to add more than one event at a time using the .ical file method. Maybe someone knows how to set up a multi-event .ical file that Outlook will accept? Could a link to such an .ical file be "subscribed" to? Is there such thing as a calendar RSS feed? Could I simulate running an exchange server? Any other ideas? Thanks everyone!

  Read the article

• (Ordered) Set Partitions in fixed-size Blocks

  - by Eugen

  Here is a function I would like to write but am unable to do so. Even if you don't / can't give a solution I would be grateful for tips. For example, I know that there is a correlation between the ordered represantions of the sum of an integer and ordered set partitions but that alone does not help me in finding the solution. So here is the description of the function I need: The Task Create an efficient* function List<int[]> createOrderedPartitions(int n_1, int n_2,..., int n_k) that returns a list of arrays of all set partions of the set {0,...,n_1+n_2+...+n_k-1} in number of arguments blocks of size (in this order) n_1,n_2,...,n_k (e.g. n_1=2, n_2=1, n_3=1 -> ({0,1},{3},{2}),...). Here is a usage example: int[] partition = createOrderedPartitions(2,1,1).get(0); partition[0]; // -> 0 partition[1]; // -> 1 partition[2]; // -> 3 partition[3]; // -> 2 Note that the number of elements in the list is (n_1+n_2+...+n_n choose n_1) * (n_2+n_3+...+n_n choose n_2) * ... * (n_k choose n_k). Also, createOrderedPartitions(1,1,1) would create the permutations of {0,1,2} and thus there would be 3! = 6 elements in the list. * by efficient I mean that you should not initially create a bigger list like all partitions and then filter out results. You should do it directly. Extra Requirements If an argument is 0 treat it as if it was not there, e.g. createOrderedPartitions(2,0,1,1) should yield the same result as createOrderedPartitions(2,1,1). But at least one argument must not be 0. Of course all arguments must be = 0. Remarks The provided pseudo code is quasi Java but the language of the solution doesn't matter. In fact, as long as the solution is fairly general and can be reproduced in other languages it is ideal. Actually, even better would be a return type of List<Tuple<Set>> (e.g. when creating such a function in Python). However, then the arguments wich have a value of 0 must not be ignored. createOrderedPartitions(2,0,2) would then create [({0,1},{},{2,3}),({0,2},{},{1,3}),({0,3},{},{1,2}),({1,2},{},{0,3}),...] Background I need this function to make my mastermind-variation bot more efficient and most of all the code more "beautiful". Take a look at the filterCandidates function in my source code. There are unnecessary / duplicate queries because I'm simply using permutations instead of specifically ordered partitions. Also, I'm just interested in how to write this function. My ideas for (ugly) "solutions" Create the powerset of {0,...,n_1+...+n_k}, filter out the subsets of size n_1, n_2 etc. and create the cartesian product of the n subsets. However this won't actually work because there would be duplicates, e.g. ({1,2},{1})... First choose n_1 of x = {0,...,n_1+n_2+...+n_n-1} and put them in the first set. Then choose n_2 of x without the n_1 chosen elements beforehand and so on. You then get for example ({0,2},{},{1,3},{4}). Of course, every possible combination must be created so ({0,4},{},{1,3},{2}), too, and so on. Seems rather hard to implement but might be possible. Research I guess this goes in the direction I want however I don't see how I can utilize it for my specific scenario. http://rosettacode.org/wiki/Combinations

  Read the article

• web application with secured sections, sessions and related trouble

  - by spirytus

  I would like to create web application with admin/checkout sections being secured. Assuming I have SSL set up for subdomain.mydomain.com I would like to make sure that all that top-secret stuff ;) like checkout pages and admin section is transferred securely. Would it be ok to structure my application as below? subdomain.mydomain.com adminSectionFolder adminPage1.php adminPage2.php checkoutPagesFolder checkoutPage1.php checkoutPage2.php checkoutPage3.php homepage.php loginPage.php someOtherPage.php someNonSecureFolder nonSecurePage1.php nonSecurePage2.php nonSecurePage3.php imagesFolder image1.jpg image2.jpg image3.jpg Users would access my web application via http as there is no need for SSL for homepage and similar. Checkout/admin pages would have to be accessed via https though (that I would ensure via .htaccess redirects). I would also like to have login form on every page of the site, including non-secure pages. Now my questions are: if I have form on non-secure page e.g http://subdomain.mydomain.com/homepage.php and that form sends data to http://subdomain.mydomain.com/loginPage.php, is data being send encrypted as if it were sent from https://subdomain.mydomain.com/homepage.php? I do realize users will not see padlock, but browser still should encrypt it, is it right? If on secure page loginPage.php (or any other accessed via https for that instance) I created session, session ID would be assigned, and in case of my web app. something like username of the logged in user. Would I be able to access these session variable from http://subdomain.mydomain.com/homepage.php to for example display greeting message? If session ID is stored in cookies then it would be trouble I assume, but could someone clarify how it should be done? It seems important to have username and password send over SSL. Related to above question I think.. would it actually make any sense to have login secured via SSL so usenrame/password would be transferred securely, and then session ID being transferred with no SSL? I mean wouldnt it be the same really if someone caught username and password being transferred, or caught session ID? Please let me know if I make sense here cause it feels like I'm missing something important. EDIT: I came up with idea but again please let me know if that would work. Having above, so assuming that sharing session between http and https is as secure as login in user via plain http (not https), I guess on all non secure pages, like homepage etc. I could check if user is already logged in, and if so from php redirect to https version of same page. So user fills in login form from homepage.php, over ssl details are send to backend so probably https://.../homepage.php. Trying to access http://.../someOtherPage.php script would always check if session is created and if so redirect user to https version of this page so https://.../someOtherPage.php. Would that work? 4.To avoid browser popping message "this page contains non secure items..." my links to css, images and all assets, e.g. in case of http://subdomain.mydomain.com/checkoutPage1.php should be absolute so "/images/image1.jpg" or relative so "../images/image1.jpg"? I guess one of those would have to work :) wow that's long post, thanks for your patience if you got that far and any answers :) oh yeh and I use php/apache on shared hosting

  Read the article

• Insert a transformed integer_sequence into a variadic template argument?

  - by coderforlife

  How do you insert a transformed integer_sequence (or similar since I am targeting C++11) into a variadic template argument? For example I have a class that represents a set of bit-wise flags (shown below). It is made using a nested-class because you cannot have two variadic template arguments for the same class. It would be used like typedef Flags<unsigned char, FLAG_A, FLAG_B, FLAG_C>::WithValues<0x01, 0x02, 0x04> MyFlags. Typically, they will be used with the values that are powers of two (although not always, in some cases certain combinations would be made, for example one could imagine a set of flags like Read=0x1, Write=0x2, and ReadWrite=0x3=0x1|0x2). I would like to provide a way to do typedef Flags<unsigned char, FLAG_A, FLAG_B, FLAG_C>::WithDefaultValues MyFlags. template<class _B, template <class,class,_B> class... _Fs> class Flags { public: template<_B... _Vs> class WithValues : public _Fs<_B, Flags<_B,_Fs...>::WithValues<_Vs...>, _Vs>... { // ... }; }; I have tried the following without success (placed inside the Flags class, outside the WithValues class): private: struct _F { // dummy class which can be given to a flag-name template template <_B _V> inline constexpr explicit _F(std::integral_constant<_B, _V>) { } }; // we count the flags, but only in a dummy way static constexpr unsigned _count = sizeof...(_Fs<_B, _F, 1>); static inline constexpr _B pow2(unsigned exp, _B base = 2, _B result = 1) { return exp < 1 ? result : pow2(exp/2, base*base, (exp % 2) ? result*base : result); } template <_B... _Is> struct indices { using next = indices<_Is..., sizeof...(_Is)>; using WithPow2Values = WithValues<pow2(_Is)...>; }; template <unsigned N> struct build_indices { using type = typename build_indices<N-1>::type::next; }; template <> struct build_indices<0> { using type = indices<>; }; //// Another attempt //template < _B... _Is> struct indices { // using WithPow2Values = WithValues<pow2(_Is)...>; //}; //template <unsigned N, _B... _Is> struct build_indices // : build_indices<N-1, N-1, _Is...> { }; //template < _B... _Is> struct build_indices<0, _Is...> // : indices<_Is...> { }; public: using WithDefaultValues = typename build_indices<_count>::type::WithPow2Values; Of course, I would be willing to have any other alternatives to the whole situation (supporting both flag names and values in the same template set, etc). I have included a "working" example at ideone: http://ideone.com/NYtUrg - by "working" I mean compiles fine without using default values but fails with default values (there is a #define to switch between them). Thanks!

  Read the article

• XML and XSD - use element name as replacement of xsi:type for polymorphism

  - by disown

  Taking the W3C vehicle XSD as an example: <schema xmlns="http://www.w3.org/2001/XMLSchema" targetNamespace="http://cars.example.com/schema" xmlns:target="http://cars.example.com/schema"> <complexType name="Vehicle" abstract="true"/> <complexType name="Car"> <complexContent> <extension base="target:Vehicle"/> ... </complexContent> </complexType> <complexType name="Plane"> <complexContent> <extension base="target:Vehicle"/> <sequence> <element name="wingspan" type="integer"/> </sequence> </complexContent> </complexType> </schema> , and the following definition of 'meansOfTravel': <complexType name="MeansOfTravel"> <complexContent> <sequence> <element name="transport" type="target:Vehicle"/> </sequence> </complexContent> </complexType> <element name="meansOfTravel" type="target:MeansOfTravel"/> With this definition you need to specify the type of your instance using xsi:type, like this: <meansOfTravel> <transport xsi:type="Plane"> <wingspan>3</wingspan> </transport> </meansOfTravel> I would just like to acheive a 'name of type' - 'name of element' mapping so that this could be replaced with just <meansOfTravel> <plane> <wingspan>3</wingspan> </plane> </meansOfTravel> The only way I could do this until now is by making it explicit: <complexType name="MeansOfTravel"> <sequence> <choice> <element name="plane" type="target:Plane"/> <element name="car" type="target:Car"/> </choice> </sequence> </complexType> <element name="meansOfTravel" type="target:MeansOfTravel"/> But this means that I have to list all possible sub-types in the 'MeansOfTravel' complex type. Is there no way of making the XML parser assume that you mean a 'Plane' if you call the element 'plane'? Or do I have to make the choice explicit? I would just like to keep my design DRY - if you have any other suggestions (like groups or so) - i would love to hear them.

  Read the article

• Converting switch statements to more elegant solution.

  - by masfenix

  I have a 9 x 9 matrix. (think of suduko). 4 2 1 6 8 1 8 5 8 3 1 5 8 1 1 7 5 8 1 1 4 0 5 6 7 0 4 6 2 5 5 4 4 8 1 2 6 8 8 2 8 1 6 3 5 8 4 2 6 4 7 4 1 1 1 3 5 3 8 8 5 2 2 2 6 6 0 8 8 8 0 6 8 7 2 3 3 1 1 7 4 now I wanna be able to get a "quadrant". for example (according to my code) the quadrant 2 , 2 returns the following: 5 4 4 2 8 1 6 4 7 If you've noticed, this is the matrix from the very center of the 9 x 9. I've split everything up in to pairs of "3" if you know what i mean. the first "ROW" is from 0 - 3, the second from 3 - 6, the third for 6 - 9.. I hope this makes sense ( I am open to alternate ways to go about this) anyways, heres my code. I dont really like this way, even though it works. I do want speed though beccause i am making a suduko solver. //a quadrant returns the mini 3 x 3 //row 1 has three quads,"1", "2", 3" //row 2 has three quads "1", "2", "3" etc public int[,] GetQuadrant(int rnum, int qnum) { int[,] returnMatrix = new int[3, 3]; int colBegin, colEnd, rowBegin, rowEnd, row, column; //this is so we can keep track of the new matrix row = 0; column = 0; switch (qnum) { case 1: colBegin = 0; colEnd = 3; break; case 2: colBegin = 3; colEnd = 6; break; case 3: colBegin = 6; colEnd = 9; break; default: colBegin = 0; colEnd = 0; break; } switch (rnum) { case 1: rowBegin = 0; rowEnd = 3; break; case 2: rowBegin = 3; rowEnd = 6; break; case 3: rowBegin = 6; rowEnd = 9; break; default: rowBegin = 0; rowEnd = 0; break; } for (int i = rowBegin ; i < rowEnd; i++) { for (int j = colBegin; j < colEnd; j++) { returnMatrix[row, column] = _matrix[i, j]; column++; } column = 0; row++; } return returnMatrix; }

  Read the article

• How do you place an Excel Sheet/Workbook onto a C# .NET Winform?

  - by incognick

  I am trying to create a stand alone application in Visual Studio 2008 C# .Net that will house Excel Workbooks (2007). I am using Office.Interop in order to create the Excel application and I open the workbooks via Workbooks.Open(...). The Interop does not provide any functionality to "move" the workbooks onto a form so I turned to P/Invoke Win32 library. I am able to move the entire excel application onto a WinForm with great success: // pseudo code to give you the idea excel = new Excel.ApplicationClass(); SetParent(excel.Hwnd, form.handle); This allows me to customize the form and control user input. All right click commands and formula editing work properly. Now, the issue I run into is when I want to open two workbooks in two separate forms. I do this by creating two excel application classes and placing each of those in their own form. When I try to reference one workbook to another workbook via =[Book2]Sheet1!A1, for example, it does not update. This is expected as each application is running under its own thread/process. Here are the alternatives I have tried. If you have any suggestions I would be greatly appreciative.(OLE is not an option. VSTO must be available) Create a single application class and move the workbook window into my form. Results: The window moves into my form and displays correctly, however, no right click or left click works on the form and it never gains focus. (I have tried to manually set focus and it does not work either). My guess is, by moving the window outside of the XLDESK application (viewable in Spy++ for Excel Application), the workbook application (EXCEL7) does not receive the correct window messages to gain focus and to behave properly. This leads me to: Move the XLDESK window handle into my form. Results: This allows the workbook to be click-able again but also has an undesired result of moving all child windows into the same form. Create a main excel application that creates workbooks. Create a new excel application for each new window. Move the workbook under the new excel application XLDESK window. Results: This also has the same effect of the 1st option. Unable to click in the workbook. This must mean that the thread that created the workbook is also responsible for the events. Create a windows hook that watches the WndProc procedure. Results: No events watched. The targeted thread must export the hook proc in a DLL export call. Excel does not do this and thus you cannot inject into it's DLL (unless someone can prove me wrong). I am able to watch all threads within my own process but not from an outside process. Excel is created as a separate process. Subclass NativeWindow. Results: Same as #4. After I move the window into my form, all events are captured up until the mouse is directly over the excel sheet making the sheet seem unclickable. One idea I haven't tried yet is just to continually save the excel sheet as the user edits it. This should update all references but I would feel this would cause poor system performance. There will be numerous chart references as well and I'm not sure if this solution would cause problems further down the road. I think in the end, all the workbooks need to be created by the same Excel Application and then moved to get the desired results but I can't seem to find the correct way to move the windows without disabling the user input in the process. Any suggestions?

  Read the article

• Need help in creating test application in Java and passing parameters into a new designed Java API.

  - by Christophe

  Need help, Please!!! By following the protocol, the Request should be built in 5 byte length, including 1 byte for changing Braud rate (Speed), and send request to a RS-232 port. Protocol: Request for the command processing, with optional extra byte for changing Baud Rate: LGT : length message ( LGT = 5 ) TYPE : 0x06 TO(time out): 0x0000 CMD : (1 byte) 0x02 application update Baud Rate : (1 byte) 0xNN (optional parameter to change baud rate of the Mnt App) where NN can be: 0x00 = No Baud Rate Change (similar to 4-byte command above) 0x09 = Change to 9600 Baud for Application Update speed 0x0A = Change to 19200 Baud for Application Update speed 0x0E = Change to 115200 Baud for Application Update speed All other bytes are not accepted and will result in a status of 0x01. I'm trying to test if my code works or not by creating another class (TestApplication.java) and pass the "3 differenr Baut rate" to this CPXAppliaction. the 3 Baud Rate is supposed to input by reading a file.txt. Question: How do you think these code (first half)? please don't warry about the details about the "sending part". I mean, do I need setter/getter for the "speed" parameter pass? I created the demo test class DemoApp.java (input speed by reading a txt file, and pass into CPXAppliaction). how do you think about that code? Many thanks to you guys!! public class CPXApplication extends CPXCommand { private int speed; . public CPXApplication() { speed = 9600; } public CPXApplication(int speedinit) { speed = speedinit; // TODO: where to get the speed? } protected void buildRequest() throws ElitePortException { String trans = ""; // build the full-qualified message following the protocol trans = addToRequest(trans, (char) 0); trans = addToRequest(trans, (char) 5); trans = addToRequest(trans, (char) 6); trans = addToRequest(trans, (char) 0); trans = addToRequest(trans, (char) 0); trans = addToRequest(trans, (char) 2); switch (speed) { case 9600: trans = addToRequest(trans, (char) 0x09); break; case 19200: trans = addToRequest(trans, (char) 0x0A); break; case 115200: trans = addToRequest(trans, (char) 0x0E); break; default: // TODO: unexpected baud rate. throw(); break; } trans = EncryptBinary(trans); trans = "F0." + trans; wrapRequest(trans); } protected String addToRequest(String req, char c) { return req + c; } protected String addToRequest(String req, String s) { return req + s; } protected String addToRequest(String req) { return req; } public void analyzeResponse() { //.............. } } Here is the demo test code: class Run { public static void run() { CPXAppliaction input = new CpXApplication(); int lineno = 0; try { FileReader fr = new FileReader("baudRateSpeed.txt"); BufferedReader reader = new BufferedReader(fr); String line = reader.readLine(); Scanner scan = null; while (line != null) { scan = new Scanner(line); String speed; speed = scan.next(); if (lineno == 0) { input.speed = speed; lineno++; } else { input = cpxapplication(speed, input); } line = reader.readLine(); } reader.close(); } catch (FileNotFoundException e) { System.out.println("Could not find the file"); } catch (IOException e) { System.out.println("Had a problem reading from file"); } } } public class DemoApp{ public void main(String args[]) { run(); }

  Read the article

• How to display same type of data from XML using XSLT

  - by MKS

  Hi Guys, I am using XSLT and XML. I have got below XML. <documentCountryInformation> <countryCode>US</countryCode> <countryName>United States</countryName> <sufficientDocumentation>Conditional</sufficientDocumentation> <sectionInformation> <sectionName>Health</sectionName> <documentParagraph paragraphId="23628"> <paragraphType>Requirement</paragraphType> <paragraphText> <p> Vaccination for <strong>yellow fever</strong> Persons without valid yellow fever certification, if required, are subject to quarantine for a period up to 6 days. </p> </paragraphText> </documentParagraph> </sectionInformation> </documentCountryInformation> <documentCountryInformation> <countryCode>IN</countryCode> <countryName>India</countryName> <sufficientDocumentation>Conditional</sufficientDocumentation> <sectionInformation> <sectionName>Health</sectionName> <documentParagraph paragraphId="23648"> <paragraphType>Requirement</paragraphType> <paragraphText> <p> Vaccination for <strong>Dengue fever</strong> Persons without valid yellow fever certification, if required, are subject to quarantine for a period up to 3 days. </p> </paragraphText> </documentParagraph> </sectionInformation> </documentCountryInformation> Above is the part of full xml and you can see there are two records of same type, now I have got the <countryName> in parameters of XSLT in above example my countryName parameter will contain this type of data "United States,India", Now I want to split the parameter data and further it will check the XML having same country name and display the data according, I mean there will be loop on country name and below is desired HTML. <div class="resultsContainer" id="divTransit"> <h3>Transit - United States (US)</h3> <p> Vaccination for <strong>yellow fever</strong> Persons without valid yellow fever certification, if required, are subject to quarantine for a period up to 6 days. </p> <h3>Transit - India (IN)</h3> <p> Vaccination for <strong>Dengue fever</strong> Persons without valid yellow fever certification, if required, are subject to quarantine for a period up to 3 days. </p> </div>

  Read the article

• Need help in creating test appliaction in Java and passing parameters into a new designed Java API.

  - by Christophe

  Need help, Please!!! By following the protocol, the Request should be built in 5 byte length, including 1 byte for changing Braud rate (Speed), and send request to a RS-232 port. Protocol: --------------- Request for the command processing, with optional extra byte for changing Baud Rate: LGT : length message ( LGT = 5 ) TYPE : 0x06 TO(time out): 0x0000 CMD : (1 byte) 0x02 application update Baud Rate : (1 byte) 0xNN (optional parameter to change baud rate of the Mnt App) where NN can be: 0x00 = No Baud Rate Change (similar to 4-byte command above) 0x09 = Change to 9600 Baud for Application Update speed 0x0A = Change to 19200 Baud for Application Update speed 0x0E = Change to 115200 Baud for Application Update speed All other bytes are not accepted and will result in a status of 0x01. ------------------ I'm trying to test if my code works or not by creating another class (TestApplication.java) and pass the "3 differenr Baut rate" to this CPXAppliaction. the 3 Baud Rate is supposed to input by reading a file.txt. Question: How do you think these code (first half)? please don't warry about the details about the "sending part". I mean, do I need setter/getter for the "speed" parameter pass? I created the demo test class DemoApp.java (input speed by reading a txt file, and pass into CPXAppliaction). how do you think about that code? Many thanks to you guys!! public class CPXApplication extends CPXCommand { private int speed; . public CPXApplication() { speed = 9600; } public CPXApplication(int speedinit) { speed = speedinit; // TODO: where to get the speed? } protected void buildRequest() throws ElitePortException { String trans = ""; // build the full-qualified message following the protocol trans = addToRequest(trans, (char) 0); trans = addToRequest(trans, (char) 5); trans = addToRequest(trans, (char) 6); trans = addToRequest(trans, (char) 0); trans = addToRequest(trans, (char) 0); trans = addToRequest(trans, (char) 2); switch (speed) { case 9600: trans = addToRequest(trans, (char) 0x09); break; case 19200: trans = addToRequest(trans, (char) 0x0A); break; case 115200: trans = addToRequest(trans, (char) 0x0E); break; default: // TODO: unexpected baud rate. throw(); break; } trans = EncryptBinary(trans); trans = "F0." + trans; wrapRequest(trans); } protected String addToRequest(String req, char c) { return req + c; } protected String addToRequest(String req, String s) { return req + s; } protected String addToRequest(String req) { return req; } public void analyzeResponse() { //.............. } } Here is the demo test code: package com.ingenico.testApp; import com.ingenico.EliteFd.; import java.util.Scanner; import java.io.; class Run { public static void run() { CPXAppliactionUpdate input = new CpXApplicationUpdate(); int lineno = 0; try { FileReader fr = new FileReader("baudRateSpeed.txt"); BufferedReader reader = new BufferedReader(fr); String line = reader.readLine(); Scanner scan = null; while (line != null) { scan = new Scanner(line); String speed; speed = scan.next(); if (lineno == 0) { input.speed = speed; lineno++; } else { input = cpxapplicationupdate(speed, input); } line = reader.readLine(); } reader.close(); } catch (FileNotFoundException e) { System.out.println("Could not find the file"); } catch (IOException e) { System.out.println("Had a problem reading from file"); } } public class DemoApp{ public void main(String args[]) { run(); } } }

  Read the article

• Generating strongly biased radom numbers for tests

  - by nobody

  I want to run tests with randomized inputs and need to generate 'sensible' random numbers, that is, numbers that match good enough to pass the tested function's preconditions, but hopefully wreak havoc deeper inside its code. math.random() (I'm using Lua) produces uniformly distributed random numbers. Scaling these up will give far more big numbers than small numbers, and there will be very few integers. I would like to skew the random numbers (or generate new ones using the old function as a randomness source) in a way that strongly favors 'simple' numbers, but will still cover the whole range, I.e. extending up to positive/negative infinity (or ±1e309 for double). This means: numbers up to, say, ten should be most common, integers should be more common than fractions, numbers ending in 0.5 should be the most common fractions, followed by 0.25 and 0.75; then 0.125, and so on. A different description: Fix a base probability x such that probabilities will sum to one and define the probability of a number n as xk where k is the generation in which n is constructed as a surreal number1. That assigns x to 0, x2 to -1 and +1, x3 to -2, -1/2, +1/2 and +2, and so on. This gives a nice description of something close to what I want (it skews a bit too much), but is near-unusable for computing random numbers. The resulting distribution is nowhere continuous (it's fractal!), I'm not sure how to determine the base probability x (I think for infinite precision it would be zero), and computing numbers based on this by iteration is awfully slow (spending near-infinite time to construct large numbers). Does anyone know of a simple approximation that, given a uniformly distributed randomness source, produces random numbers very roughly distributed as described above? I would like to run thousands of randomized tests, quantity/speed is more important than quality. Still, better numbers mean less inputs get rejected. Lua has a JIT, so performance can't be reasonably predicted. Jumps based on randomness will break every prediction, and many calls to math.random() will be slow, too. This means a closed formula will be better than an iterative or recursive one. 1 Wikipedia has an article on surreal numbers, with a nice picture. A surreal number is a pair of two surreal numbers, i.e. x := {n|m}, and its value is the number in the middle of the pair, i.e. (for finite numbers) {n|m} = (n+m)/2 (as rational). If one side of the pair is empty, that's interpreted as increment (or decrement, if right is empty) by one. If both sides are empty, that's zero. Initially, there are no numbers, so the only number one can build is 0 := { | }. In generation two one can build numbers {0| } =: 1 and { |0} =: -1, in three we get {1| } =: 2, {|1} =: -2, {0|1} =: 1/2 and {-1|0} =: -1/2 (plus some more complex representations of known numbers, e.g. {-1|1} ? 0). Note that e.g. 1/3 is never generated by finite numbers because it is an infinite fraction – the same goes for floats, 1/3 is never represented exactly.

  Read the article

• Ajax using Rails

  - by Steve

  Hi, I have a favourite and un-favourite functionality in my application and I am using jQuery. This functionality works partially. The page gets loaded, and when I click the 'favourite' button(it is inside add_favourite_div element), it sends a XHR request and the post is set as favourite. Then a new div called "remove_favourite_div" replaces its place.Now when I click the remove favourite(which is part of remove_favourite_div), it sends a normal http request inside of xhr. The structure when the page gets loaded first time <div id="favourite"> <div id="add_favourite_div"> <form method="post" id="add_favourite" action="/viewpost/add_favourite"> <div style="margin: 0pt; padding: 0pt; display: inline;"> <input type="hidden" value="w873BgYHLxQmadUalzMRUC+1ql4AtP3U7f78dT8x9ho=" name="authenticity_token"> </div> <input type="hidden" value="3" name="Favourite[post_id]" id="Favourite_place_id"> <input type="hidden" value="2" name="Favourite[user_id]" id="Favourite_user_id"> <input type="submit" value="Favourite" name="commit"><br> </form> </div> </div> DOM after clicking on the unfavourite button <div id="favourite"> <div id="remove_favourite_div"> <form method="post" id="remove_favourite" action="/viewpost/remove_favourite"> <div style="margin: 0pt; padding: 0pt; display: inline;"> <input type="hidden" value="w873BgYHLxQmadUalzMRUC+1ql4AtP3U7f78dT8x9ho=" name="authenticity_token"> </div> <input type="hidden" value="3" name="Favourite[post_id]" id="Favourite_place_id"> <input type="hidden" value="2" name="Favourite[user_id]" id="Favourite_user_id"> <input type="submit" value="UnFavourite" name="commit"><br> </form> </div> </div> In my application.js, I have two functions to trigger the xhr request $("#add_favourite").submit(function(){ alert("add favourite"); action = $(this).attr("action") $.post(action,$(this).serialize(),null,"script"); return false; }); $("#remove_favourite").submit(function(){ alert("remove favourite"); action = $(this).attr("action"); $.post(action,$(this).serialize(),null,"script"); return false; }); Here, when the post is initially not a favourite, favourite button is displayed and when i clicked on the button, $("#add_favourite").submit gets called and unfavourite form is displayed correctly, but now when I click on the un-favourite button, $("#remove_favourite").submit does not get called. The whole scenario is true in both ways, I mean favourite-Unfavourite and Unfavourite-favourite Can someone please help me to solve this Thanks

  Read the article

• Is it possible to shuffle a 2D matrix while preserving row AND column frequencies?

  - by j_random_hacker

  Suppose I have a 2D array like the following: GACTG AGATA TCCGA Each array element is taken from a small finite set (in my case, DNA nucleotides -- {A, C, G, T}). I would like to randomly shuffle this array somehow while preserving both row and column nucleotide frequencies. Is this possible? Can it be done efficiently? [EDIT]: By this I mean I want to produce a new matrix where each row has the same number of As, Cs, Gs and Ts as the corresponding row of the original matrix, and where each column has the same number of As, Cs, Gs and Ts as the corresponding column of the original matrix. Permuting the rows or columns of the original matrix will not achieve this in general. (E.g. for the example above, the top row has 2 Gs, and 1 each of A, C and T; if this row was swapped with row 2, the top row in the resulting matrix would have 3 As, 1 G and 1 T.) It's simple enough to preserve just column frequencies by shuffling a column at a time, and likewise for rows. But doing this will in general alter the frequencies of the other kind. My thoughts so far: If it's possible to pick 2 rows and 2 columns so that the 4 elements at the corners of this rectangle have the pattern XY YX for some pair of distinct elements X and Y, then replacing these 4 elements with YX XY will maintain both row and column frequencies. In the example at the top, this can be done for (at least) rows 1 and 2 and columns 2 and 5 (whose corners give the 2x2 matrix AG;GA), and for rows 1 and 3 and columns 1 and 4 (whose corners give GT;TG). Clearly this could be repeated a number of times to produce some level of randomisation. Generalising a bit, any "subrectangle" induced by a subset of rows and a subset of columns, in which the frequencies of all rows are the same and the frequencies of all columns are the same, can have both its rows and columns permuted to produce a valid complete rectangle. (Of these, only those subrectangles in which at least 1 element is changed are actually interesting.) Big questions: Are all valid complete matrices reachable by a series of such "subrectangle rearrangements"? I suspect the answer is yes. Are all valid subrectangle rearrangements decomposable into a series of 2x2 swaps? I suspect the answer is no, but I hope it's yes, since that would seem to make it easier to come up with an efficient algorithm. Can some or all of the valid rearrangements be computed efficiently? This question addresses a special case in which the set of possible elements is {0, 1}. The solutions people have come up with there are similar to what I have come up with myself, and are probably usable, but not ideal as they require an arbitrary amount of backtracking to work correctly. Also I'm concerned that only 2x2 swaps are considered. Finally, I would ideally like a solution that can be proven to select a matrix uniformly at random from the set of all matrices having identical row frequencies and column frequencies to the original. I know, I'm asking for a lot :)

  Read the article

• Is there a FlashBlock plugin written in Javascript?

  - by user3709489

  Anyone here have one ? I mean a plugin like Click to Play of Firefox and Chrome feature ( https://www.google.com/search?q=click+to+play+firefox&hl=vi&source=lnms&tbm=isch&sa=X&ei=gOKPU5GCJsP_8QXFtYC4Aw&ved=0CAgQ_AUoAQ&biw=1366&bih=717 ) but written in Javascript, work like LazyLoad I found here: https://github.com/kaizau/Lazy-Load-Images-without-jQuery If anyone here have something like that please share me, I also found a click to show function for image: <html> <head> <title></title> </head> <body> <!-- Put the body of your page below this line --> <script type="text/javascript"> <!-- function MM_preloadImages() { //v3.0 var d=document; if(d.images){ if(!d.MM_p) d.MM_p=new Array(); var i,j=d.MM_p.length,a=MM_preloadImages.arguments; for(i=0; i<a.length; i++) if (a[i].indexOf("#")!=0){ d.MM_p[j]=new Image; d.MM_p[j++].src=a[i];}} } function MM_swapImgRestore() { //v3.0 var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x.oSrc; } function MM_findObj(n, d) { //v4.01 var p,i,x; if(!d) d=document; if((p=n.indexOf("?"))>0&&parent.frames.length) { d=parent.frames[n.substring(p+1)].document; n=n.substring(0,p);} if(!(x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms[i][n]; for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].document); if(!x && d.getElementById) x=d.getElementById(n); return x; } function MM_swapImage() { //v3.0 var i,j=0,x,a=MM_swapImage.arguments; document.MM_sr=new Array; for(i=0;i<(a.length-2);i+=3) if ((x=MM_findObj(a[i]))!=null){document.MM_sr[j++]=x; if(!x.oSrc) x.oSrc=x.src; x.src=a[i+2];} } //--> </script> <p><img data-src="graphics/one.gif" width="400" height="600" id="Image1" onClick="MM_swapImage('Image1','','http://www.nasa.gov/sites/default/themes/NASAPortal/images/nasa-starfield-header-hr.png',0)"></p> <!-- Put the body of your page above this line --> </body> </html> Many thank!

  Read the article

• Same source, multiple targets with different resources (Visual Studio .Net 2008)

  - by Mike Bell

  A set of software products differ only by their resource strings, binary resources, and by the strings / graphics / product keys used by their Visual Studio Setup projects. What is the best way to create, organize, and maintain them? i.e. All the products essentially consist of the same core functionality customized by graphics, strings, and other resource data to form each product. Imagine you are creating a set of products like "Excel for Bankers", Excel for Gardeners", "Excel for CEOs", etc. Each product has the the same functionality, but differs in name, graphics, help files, included templates etc. The environment in which these are being built is: vanilla Windows.Forms / Visual Studio 2008 / C# / .Net. The ideal solution would be easy to maintain. e.g. If I introduce a new string / new resource projects I haven't added the resource to should fail at compile time, not run time. (And subsequent localization of the products should also be feasible). Hopefully I've missed the blindingly-obvious and easy way of doing all this. What is it? ============ Clarification(s) ================ By "product" I mean the package of software that gets installed by the installer and sold to the end user. Currently I have one solution, consisting of multiple projects, (including a Setup project), which builds a set of assemblies and create a single installer. What I need to produce are multiple products/installers, all with similar functionality, which are built from the same set of assemblies but differ in the set of resources used by one of the assemblies. What's the best way of doing this? ------------ The 95% Solution ----------------- Based upon Daminen_the_unbeliever's answer, a resource file per configuration can be achieved as follows: Create a class library project ("Satellite"). Delete the default .cs file and add a folder ("Default") Create a resource file in the folder "MyResources" Properties - set CustomToolNamespace to something appropriate (e.g. "XXX") Make sure the access modifier for the resources is "Public". Add the resources. Edit the source code. Refer to the resources in your code as XXX.MyResources.ResourceName) Create Configurations for each product variant ("ConfigN") For each product variant, create a folder ("VariantN") Copy and Paste the MyResources file into each VariantN folder Unload the "Satellite" project, and edit the .csproj file For each "VariantN/MyResources" <Compile> or <EmbeddedResource> tag, add a Condition="'$(Configuration)' == 'ConfigN'" attribute. Save, Reload the .csproj, and you're done... This creates a per-configuration resource file, which can (presumably) be further localized. Compile error messages are produced for any configuration that where a a resource is missing. The resource files can be localized using the standard method (create a second resources file (MyResources.fr.resx) and edit .csproj as before). The reason this is a 95% solution is that resources used to initialize forms (e.g. Form Titles, button texts) can't be easily handled in the same manner - the easiest approach seems to be to overwrite these with values from the satellite assembly.

  Read the article

• about getadrrinfo() C++?

  - by Isavel

  I'm reading this book called beej's guide to network programming and there's a part in the book were it provide a sample code which illustrate the use of getaddrinfo(); the book state that the code below "will print the IP addresses for whatever host you specify on the command line" - beej's guide to network programming. now I'm curious and want to try it out and run the code, but I guess the code was develop in UNIX environment and I'm using visual studio 2012 windows 7 OS, and most of the headers was not supported so I did a bit of research and find out that I need to include the winsock.h and ws2_32.lib for windows, for it to get working, fortunately everything compiled no errors, but when I run it using the debugger and put in 'www.google.com' as command argument I was disappointed that it did not print any ipaddress, the output that I got from the console is "getaddrinfo: E" what does the letter E mean? Do I need to configure something out of the debugger? Interestingly I left the command argument blank and the output changed to "usage: showip hostname" Any help would be appreciated. #ifdef _WIN32 #endif #include <sys/types.h> #include <winsock2.h> #include <ws2tcpip.h> #include <iostream> using namespace std; #include <stdio.h> #include <string.h> #include <sys/types.h> #include <winsock.h> #pragma comment(lib, "ws2_32.lib") int main(int argc, char *argv[]) { struct addrinfo hints, *res, *p; int status; char ipstr[INET6_ADDRSTRLEN]; if (argc != 2) { fprintf(stderr,"usage: showip hostname\n"); system("PAUSE"); return 1; } memset(&hints, 0, sizeof hints); hints.ai_family = AF_UNSPEC; // AF_INET or AF_INET6 to force version hints.ai_socktype = SOCK_STREAM; if ((status = getaddrinfo(argv[1], NULL, &hints, &res)) != 0) { fprintf(stderr, "getaddrinfo: %s\n", gai_strerror(status)); system("PAUSE"); return 2; } printf("IP addresses for %s:\n\n", argv[1]); for(p = res;p != NULL; p = p->ai_next) { void *addr; char *ipver; // get the pointer to the address itself, // different fields in IPv4 and IPv6: if (p->ai_family == AF_INET) { // IPv4 struct sockaddr_in *ipv4 = (struct sockaddr_in *)p->ai_addr; addr = &(ipv4->sin_addr); ipver = "IPv4"; } else { // IPv6 struct sockaddr_in6 *ipv6 = (struct sockaddr_in6 *)p->ai_addr; addr = &(ipv6->sin6_addr); ipver = "IPv6"; } // convert the IP to a string and print it: inet_ntop(p->ai_family, addr, ipstr, sizeof ipstr); printf(" %s: %s\n", ipver, ipstr); } freeaddrinfo(res); // free the linked list system("PAUSE"); return 0; }

  Read the article

• R concentrating data frame

  - by user1631503

  I have a data frame like this >X_com Day_1 Day_2 Day_3 Day_4 Day_5 Day_6 Day_7 Day_8 Day_9 Day_10 1 0 0 0 0 0 0 0 0 0 1 2 0 0 0 0 0 0 0 0 0 0 3 0 0 0 0 0 0 0 0 0 0 4 0 0 0 0 0 0 0 0 0 0 5 0 0 0 0 0 0 0 0 0 0 6 0 0 0 0 0 0 0 0 0 0 7 0 0 0 0 0 0 0 0 0 0 8 0 0 0 0 0 0 0 0 0 0 I need to concentrate all the values into one column and add another column with "1;" So I did this > X_new=matrix(1,8,2) > X_new[1,]=paste(X_com[1,1], X_com[1,2],X_com[1,3],X_com [1,4],X_com[1,5],X_com[1,6],X_com[1,7],X_com[1,8],X_com [1,9],X_com[1,10], sep="") > X_new[2,]=paste(X_com[2,1], X_com[2,2],X_com[2,3],X_com [2,4],X_com[2,5],X_com[2,6],X_com[2,7],X_com[2,8],X_com [2,9],X_com[2,10], sep="") > X_new[3,]=paste(X_com[3,1], X_com[3,2],X_com[3,3],X_com [3,4],X_com[3,5],X_com[3,6],X_com[3,7],X_com[3,8],X_com [3,9],X_com[3,10], sep="") > X_new[4,]=paste(X_com[4,1], X_com[4,2],X_com[4,3],X_com [4,4],X_com[4,5],X_com[4,6],X_com[4,7],X_com[4,8],X_com [4,9],X_com[4,10], sep="") > X_new[5,]=paste(X_com[5,1], X_com[5,2],X_com[5,3],X_com [5,4],X_com[5,5],X_com[5,6],X_com[5,7],X_com[5,8],X_com [5,9],X_com[5,10], sep="") > X_new[6,]=paste(X_com[6,1], X_com[6,2],X_com[6,3],X_com [6,4],X_com[6,5],X_com[6,6],X_com[6,7],X_com[6,8],X_com [6,9],X_com[6,10], sep="") > X_new[7,]=paste(X_com[7,1], X_com[7,2],X_com[7,3],X_com [7,4],X_com[7,5],X_com[7,6],X_com[7,7],X_com[7,8],X_com [7,9],X_com[7,10], sep="") > X_new[8,]=paste(X_com[8,1], X_com[8,2],X_com[8,3],X_com [8,4],X_com[8,5],X_com[8,6],X_com[8,7],X_com[8,8],X_com [8,9],X_com[8,10], sep="") > X_new[1:8,2]="1;" > as.data.frame(X_new) V1 V2 1 0000000001 1; 2 0000000000 1; 3 0000000000 1; 4 0000000000 1; 5 0000000000 1; 6 0000000000 1; 7 0000000000 1; 8 0000000000 1; I believe there's definitely a faster way of achieving this but have no clue. The other problem is, I have over a thousand of data frame like this needs to be concentrated. I'm still learning how to loop these repetitive steps but is progressing quite slowly. If the original data frames were named uniquely, does that mean I have no choice but to work on each of them individually? Thank you in advance.

  Read the article

• mine phrases (up to 3 words) from a given text

  - by DS_web_developer

  I asked before for a simple solution to my problem (using sphinx search service) but I got nowhere... someone has kindly provided me with this code <?php /** * $Project: GeoGraph $ * $Id$ * * GeoGraph geographic photo archive project * This file copyright (C) 2005 Barry Hunter ([email protected]) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ /** * Provides the methods for updating the worknet tables * * @package Geograph * @author Barry Hunter <[email protected]> * @version $Revision$ */ function addTwoLetterPhrase($phrase) { global $w2; $w2[$phrase] = (isset($w2[$phrase]))?($w2[$phrase]+1):1; } function addThreeLetterPhrase($phrase) { global $w3; $w3[$phrase] = (isset($w3[$phrase]))?($w3[$phrase]+1):1; } function updateWordnet(&$db,$text,$field,$id) { global $w1,$w2,$w3; $alltext = strtolower(preg_replace('/\W+/',' ',str_replace("'",'',$text))); if (strlen($text)< 1) return; $words = preg_split('/ /',$alltext); $w1 = array(); $w2 = array(); $w3 = array(); //build a list of one word phrases foreach ($words as $word) { $w1[$word] = (isset($w1[$word]))?($w1[$word]+1):1; } //build a list of two word phrases $text = $alltext; $text = preg_replace('/(\w+) (\w+)/e','addTwoLetterPhrase("$1 $2")',$text); $text = $alltext; $text = preg_replace('/(\w+)/','',$text,1); $text = preg_replace('/(\w+) (\w+)/e','addTwoLetterPhrase("$1 $2")',$text); //build a list of three word phrases $text = $alltext; $text = preg_replace('/(\w+) (\w+) (\w+)/e','addThreeLetterPhrase("$1 $2 $3")',$text); $text = $alltext; $text = preg_replace('/(\w+)/','',$text,1); $text = preg_replace('/(\w+) (\w+) (\w+)/e','addThreeLetterPhrase("$1 $2 $3")',$text); $text = $alltext; $text = preg_replace('/(\w+) (\w+)/','',$text,1); $text = preg_replace('/(\w+) (\w+) (\w+)/e','addThreeLetterPhrase("$1 $2 $3")',$text); foreach ($w1 as $word=>$count) { $db->Execute("insert into wordnet1 set gid = $id,words = '$word',$field = $count");// ON DUPLICATE KEY UPDATE $field=$field+$count"); } foreach ($w2 as $word=>$count) { $db->Execute("insert into wordnet2 set gid = $id,words = '$word',$field = $count"); } foreach ($w3 as $word=>$count) { $db->Execute("insert into wordnet3 set gid = $id,words = '$word',$field = $count"); } } ?> It works fine and does almost exactly what I need....... except.... it is not utf8 friendly... I mean... it splits whole words into parts (on special chars) where it shouldn't! so my guess is I should use multibyte functions instead of regular preg_replace... I tried to replace preg_replace with mb_ereg_replace but it is not working as it should... at least not for 2 and 3 words phrases any ideas?

  Read the article

• Qt: TableWidget's ItemAt() acting weirdly

  - by emredog

  Hi, i'm working on a windows application, where in a dialog i query some data from Postgres, and manually show the output in a table widget. m_ui->tableWidget->setRowCount(joinedData.count()); for(int i=0; i<joinedData.count(); i++) //for each row { m_ui->tableWidget->setItem(i, 0, new QTableWidgetItem(joinedData[i].bobin.referenceNumber)); m_ui->tableWidget->setItem(i, 1, new QTableWidgetItem(QString::number(joinedData[i].bobin.width))); m_ui->tableWidget->setItem(i, 2, new QTableWidgetItem(QString::number(joinedData[i].tolerance.getHole()))); m_ui->tableWidget->setItem(i, 3, new QTableWidgetItem(QString::number(joinedData[i].tolerance.getLessThanZeroFive()))); m_ui->tableWidget->setItem(i, 4, new QTableWidgetItem(QString::number(joinedData[i].tolerance.getZeroFive_to_zeroSeven()))); m_ui->tableWidget->setItem(i, 5, new QTableWidgetItem(QString::number(joinedData[i].tolerance.getZeroFive_to_zeroSeven_repetitive()))); m_ui->tableWidget->setItem(i, 6, new QTableWidgetItem(QString::number(joinedData[i].tolerance.getZeroSeven_to_Three()))); m_ui->tableWidget->setItem(i, 7, new QTableWidgetItem(QString::number(joinedData[i].tolerance.getThree_to_five()))); m_ui->tableWidget->setItem(i, 8, new QTableWidgetItem(QString::number(joinedData[i].tolerance.getMoreThanFive()))); } Also, based on row and column information, i paint some of these tablewidgetitems to some colors, but i don't think it's relevant. I reimplemented the QDialog's contextMenuEvent, to obtain the right clicked tableWidgetItem's row and column coordinates: void BobinFlanView::contextMenuEvent(QContextMenuEvent *event) { QMenu menu(m_ui->tableWidget); //standard actions menu.addAction(this->markInactiveAction); menu.addAction(this->markActiveAction); menu.addSeparator(); menu.addAction(this->exportAction); menu.addAction(this->exportAllAction); //obtain the rightClickedItem QTableWidgetItem* clickedItem = m_ui->tableWidget->itemAt(m_ui->tableWidget->mapFromGlobal(event->globalPos())); // if it's a colored one, add some more actions if (clickedItem && clickedItem->column()>1 && clickedItem->row()>0) { //this is a property, i'm keeping this for a later use this->lastRightClickedItem = clickedItem; //debug purpose: QMessageBox::information(this, "", QString("clickedItem = %1, %2").arg(clickedItem->row()).arg(clickedItem->column())); QMessageBox::information(this, "", QString("globalClick = %1, %2\ntransformedPos = %3, %4").arg(event->globalX()).arg(event->globalY()) .arg(m_ui->tableWidget->mapFromGlobal(event->globalPos()).x()).arg(m_ui->tableWidget->mapFromGlobal(event->globalPos()).y())); menu.addSeparator(); menu.addAction(this->changeSelectedToleranceToUygun); menu.addAction(this->changeSelectedToleranceToUyar); menu.addAction(this->changeSelectedToleranceToDurdurUyar); //... some other irrevelant 'enable/disable' activities menu.exec(event->globalPos()); } The problem is, when i right click on the same item i get the same global coordinates, but randomly different row-column information. For instance, the global pos is exactly 600,230 but row-column pair is randomly (5,3) and (4,3). I mean, what?! Also, when i click to an item from the last to rows (later than 13, i guess) will never go into condition "if (clickedItem && clickedItem-column()1 && clickedItem-row()0)", i think it's mainly because 'clickedItem' is null. I'll be more than glad to share any more information, or even the full cpp-h-ui trio in order to get help. Thanks a lot.

  Read the article

< Previous Page | 385 386 387 388 389 390 391 392 393 394 395 396  | Next Page >