Search Results

Search found 1584 results on 64 pages for 'punch cards'.

Page 39/64 | < Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >

• AHCI and Memtest86+

  - by satanicpuppy

  I've got a motherboard with SATA AHCI enabled, and I need to disable it to run Memtest86+ (because Window's built-in RAM diagnostic tool isn't worth a barrel of warm snot), and because the Memtest developers are too lazy to fix the bootloader problem. Fine, I know how to do that. The problem is, I, in a moment of insanity driven by the fact that I work with hardware RAID cards all the time, felt the need to enable the onboard RAID. In retrospect, this was stupid: the onboard raid is a joke, but I'm stuck with it. My question is, if I disable AHCI am I going to lose the RAID information? I haven't been able to find a definitive yes or no anywhere, and I'm not in the mood to find out the hard way.

  Read the article

• Which hardware changes require operating system reinstallation?

  - by Mark

  I'm about to upgrade my computer but might keep some parts. Just wandering what I would have to keep to prevent me having to reinstall my OSs, at the moment I have a dual boot setup with ubuntu and windows 7. I'm pretty sure you can't just take your hard drive with the OS on it and put it into a different box and keep going (can you?) but I know you can change the graphics cards, secondary hard drives and ram with out a problem. So what is it that you can't change? The CPU? Motherboard? Thanks for any replies

  Read the article

• Help: Best way to do a TV-out in 7300GT Nvidia video card?

  - by Martin Ongtangco

  I'm planning to recycle my old PC and build a Media Center using an open-source (C#) software called MediaPortal. My old PC has a GeForce 7300GT with a TV-out plug built-in. When I tested it last night, it wouldn't detect my JVC tv (CRT) using the current drivers. I even purchased a new copper-based TV-Out to RCA cable. I searched all 3 AV channels. The video card has 3 output ports: 2 DVI & 1 s-video. I used the s-video with a S-Video to RCA out cable. I swapped between PAL & NTSC So what I did was I downloaded the first version of an Nvidia driver for 7 series cards, but still even with the old console, it couldn't detect the TV. I'm running out of viable ideas. Anyone here had the same problem and fixed it? Any suggestion is appreciated. Thank you!

  Read the article

• How can I disable Ctrl+Shift+Arrow from causing my screen to flip?

  - by nizzle

  Windows 7 Home Premium, Catalyst Control Center. Without any apparent reason, after booting my PC, I got this little balloon "HD 4600 Drivers updated". I did not install any new cards or drivers or anything. But now, when I try to select an entire word by pressing Ctrl + Shift + ? / ? my screen flips left to right and upside down. Where can I disable this annoying shortcut? OR Any other way of selecting the entire word? There is no option for this in Catalyst Control Center.

  Read the article

• Computer not displaying anything

  - by Justen

  The computer in question worked last week. It's brand new, never been connected to the internet, up-to-date parts, etc. Last week, I installed some 3D software on it, then shut it down and waited for the license files that arrived this week. I've done this to 4 other PCs with the same hardware and software. I've tried: Hooking it up to 3 different monitors using different video cables 2 other graphics cards and a handful of other things like switching which port it's plugged into before and after a restart. I have the driver disc, and a windows reinstallation disc, but they won't do me any good because no display at all for any interval of time. All the fans are moving: psu, gfx, cpu etc, so I don't believe it's a power issue. Here are the specs I know of: 4GB RAM 8800 GTX 700w PSU Intel dual core (not sure of model) Anyways, I'm open to ideas.

  Read the article

• Radeon hd 6570 black screen

  - by Sho

  I got some problem with new graphic card. Every time I use AMD Catalyst drivers on Windows or Linux, screen repeatedly goes black. This usually shows u when i open new cards in a browser, resize a window or run a program. Card runs smoothly on basic drivers but this means low resolution. 1940x1080 is native for my monitor so it causes a lot of problems. I've got a 600W Deus G1, so the power is not the problem. Maybe its a silly question, but would going form a vga cable to hdmi help to improve this situation? If not, can it be caused by slow processor or old mainboard? Im getting kinda confused about this whole thing...

  Read the article

• iptables: limiting bytes downloaded per IP per day?

  - by Miles

  On a public-facing web server, I'd like to limit the total bytes downloaded per IP address per day. For example, after a visitor downloaded 100MB, any additional requests would be dropped or rejected for the next 24 hours. Is it possible to accomplish this using iptables alone? The connbytes, connlimit, hashlimit, quota, and recent options all look promising, but the man page plays its cards close to the vest (e.g., "quota - Implements network quotas by decrementing a byte counter with each packet. --quota bytes The quota in bytes."). Would like to avoid using a proxy (like Squid) if possible.

  Read the article

• Crossover cable in addition to normal network connection on servers?

  - by Zero0ne

  I have 2 servers, both with Windows 2003 R2 Each have 2 NIC ports that are 10/100/1000 They are both connected to our LAN + joined to the domain (1 NIC port free on each server) The problem is that our main router is only 10/100 on the ports that these servers are connected to. Since one server is going to host SQL 2005 and the other will be running Altiris NS7, I was hoping that I could use a crossover cable to connect the two directly, thus taking advantage of their 1gbps NIC cards. Is this possible? If so what steps do I need to take to accomplish this? What needs to be done to make sure that when the app server is communicating with the SQL server that it is using the direct link vs traversing the LAN? Thanks a lot!

  Read the article

• Change Linux Console's Default Monitor

  - by Tim M

  Is there any way to specify which monitor the console is displayed on in Linux? Details: I have a 3 monitor setup with 2 video cards. When I boot the computer, the BIOS displays on the PCI graphics card (which has a small monitor). When starting Linux, the console is displayed on the same monitor. Is there a way to have the console output on a different monitor? I'm using the vesafb framebuffer. I don't see a way in my BIOS to change the default video card.

  Read the article

• Yum Update fails due to conflicting perl packages

  - by amRit

  Hi I have a CentOS 5.2 i386 Production box with Qmail, LAMP etc now since it showed me that it could upgrade to 5.3, i downloaded all the packages using yum update However, the update fails due to perl packages conflicting I believe that while installing Qmail, I had tried for Mailscanner and thus it upgraded the per itself I read somewhere that we can uninstall the conflicting rpms and then go for the upgrade But, I am about 50 % sure that if I go ahead and uninstall perl, my server will crash like a falling house of cards Also, perl is needed by variety of packages working including vpopmail etc Thus, I request anyone to please tell me if we have a safer solution to this IF there is no solution to this, then can somebody please teach me how to backup and restore Qmail as it is. I can handle the rest of the things I sincerely appreciate those who have read and even thought about my problem In anticipation of a solution Regards amRit

  Read the article

• Getting network interface device name in powershell

  - by Grant

  I needed a powershell 2 script to get the name and device name of each interface like it is shown in network connections in control panel. Should be easy... $interfaces = Get-WmiObject Win32_NetworkAdapter $interfaces | foreach { $friendlyname = $_ | Select-Object -ExpandProperty NetConnectionID $name = $_ | Select-Object -ExpandProperty Name } However, $name comes back as "Broadcom BCM5709C NetXtreme II GigE (NDIS VBD Client)", whereas in control panel it shows "Broadcom BCM5709C NetXtreme II GigE (NDIS VBD Client) #69", because there are multiple cards. I can't find that number anywhere in the properties. How can I get both the Name and Device Name, exactly as shown in Network Connections, in powershell 2 on windows server 2008 r2?

  Read the article

• FreeNas running on ESXi - sometimes gets very slugish.

  - by Luma

  Hello everyone, I have a ESXi server (dual quad core, 8GB of DDR3 ram, 6x 1TB WD Blacks running in RAid 5 on the PErc 6/i controller. I have a 64bit freenas VM running, on this VM I keep about 200Gigs of stuff that my windows machines access. every now and then the throughput of this VM just dies, for example right now it can't even handle streaming a song and when I tried to transfer a folder the speed goes from 10-400KB/s. Might I add at this point that the ESXi box has dual gigabit network cards plugged into a good solid gigabit switch and other linux and windows VM's are just fine I have seen speeds over 90MB/s (frequently) The server still has ram left over (plenty actually) and cpu is very low (500-1000mhz) any ideas what could cause this? thanks. Luc

  Read the article

• Best motherboard power supply combo for backblaze server

  - by jin14

  Building a backblaze server as described in this article. http://blog.backblaze.com/ So 45 hard drives in one box. I'm making it a MSDPM 2010 server so I actually don't even need raid cards in there as MSDPM will figure out how to use all of the hard drives on it's own. So need to know what motherboard, CPU, power supply I should get. Primary hard drive : SSD 128GB Storage : 45 1.5GB sata drives OS : windows 2008 Backup software : Microsoft System center Data protection server 2010 Need to know Which mother board to buy which will support 45 SATA hard drives. Don't need a raid card. Which power supply can power all 45 hard drives, 1 ssd drive, motherboard. Best set of equipment that meets my needs wins

  Read the article

• Hiding monitor from windows, working with it from my app only [closed]

  - by Mikhail

  I need to use a monitor as a "private" device for my special application, I want to use it as a flashlight of a sort and draw special patterns on it in full screen. I don't want this monitor to be recognized by OS (Windows 7) as a monitor. I.e. user should not be able to move mouse to that monitor, or change its resolution, or run screensaver on it or whatever. But I want to be able to interact with it from my application. Monitor is plugged using an HDMI cable to a video card (most probably nVidia). What is the simplest way to do this? All solutions are appreciated, including purchasing additional adapters or simple video cards, or any other special devices.

  Read the article

• How to Use 3 Monitors

  - by The.Anti.9

  Right now my setup has a nice big 24" flatscreen in the center, and a 19" flatscreen to the left. And a big gaping hole on the right. I have a 3rd monitor to put there, but I'm not sure how to get the computer to recognize it. Do I need a graphics card with 3 ports? Or can I span the monitors over non SLI-Linked graphics cards? Is it possible to plug my 3rd monitor into the on-board VGA port and have it work?

  Read the article

• LCD monitor reports incorrect maximum resolution

  - by SLaks

  I have four 20" Planar 2010M LCD monitors with a maximum resolution of 1600 x 1200 connected to two nVidia video cards (8600 GT and 7600 GS). I'm running Windows Server 2003 x86. Recently, two of the monitors have started mis-reporting their maximum resolution as 1280 x 1024. When this first happened, I used nVidia's Custom Resolutions feature to force the monitors back to 1600 x 1200. Yesterday, however, I upgraded nVidia's video card driver, and ever since, I cannot get the DVI one back to 1600 x 1200. When I add the custom resolution in nVidia's control panel, if I set either the width or the height to even a single pixel more than 1280 x 1024, nothing changes when I click Test (the monitor doesn't even flash black, although after 15 seconds, it flashes black and doesn't change). After adding Does anyone know what the problem is? Is there anything I can do about it?

  Read the article

• 2 GPUs (for multi-monitor setup)

  - by A Dwarf

  I have a machine to which I need to connect a second monitor. This machine currently hosts a ATI Radeon HD 4770 with two DVI adapters. The second monitor to be hooked to this machine is a VGA monitor. Until I find a DVI-VGA adpater, I'm thinking installing a second graphics card which does have a VGA adapter, an NVidia card. Can I successfully run both AMD and NVidia cards on this machine? Any specifics I must be aware of, like how to ensure the ATI card to be the main card? Operating system is Windows 7

  Read the article

• Windows XP Home Edition SP3 cant recognise PCMIA SD Card

  - by Pozo

  System Specifications: Laptop : Dell Inspiron 6000 OS: Windows Home Edition SP3 SD Adapter: Hagiwara Smart Media Adapter I inserted the card into the slot, windows xp recognises the device, lists the pcmia controller on the device manager list, an entry appears under the IDE ATA/ATAPI category on the device manager as well. However, the device does not show under my computer and the driver does not get assigned a letter number. I checked the system logs from the device manager and there were no logged errors. Checking the Hagiwara support website, the manufacturer indicates that the adapter driver is the same as the windows xp pcmia controller. Checking Dell's website, no specific drivers were listed for that either. General Search on the web indicates that multiple people face similar problems with their SD cards, yet none actually spell out the route issue that causes this. Please let me know if you have any suggestions for further debugging. Thanks in advance

  Read the article

• QR vcard with a photo

  - by Cayetano Gonçalves

  I am about to get a ton of business cards printed from my new corporation, and I am allowed to have a QR code on it, and I would really like to be able to add a photo to be attached to the vcard. I know in the raw vcard you can add a photo like this: BEGIN:VCARD VERSION:4.0 N:Gump;Forrest;;; FN: Forrest Gump ORG:Bubba Gump Shrimp Co. TITLE:Shrimp Man PHOTO:http://www.example.com/dir_photos/my_photo.gif TEL;TYPE=work,voice;VALUE=uri:tel:+1-111-555-1212 TEL;TYPE=home,voice;VALUE=uri:tel:+1-404-555-1212 ADR;TYPE=work;LABEL="42 Plantation St.\nBaytown, LA 30314\nUnited States of America" :;;42 Plantation St.;Baytown;LA;30314;United States of America EMAIL:[email protected] REV:20080424T195243Z END:VCARD But I can't find any way to include the photo field into a QR code, any suggestions would be greatly appreciated.

  Read the article

• Should I quit using Ifconfig?

  - by Zhen

  With the servers that mount Infiniband cards, when I use the ifconfig command I have the warning: Ifconfig uses the ioctl access method to get the full address information, which limits hardware addresses to 8 bytes. Because Infiniband address has 20 bytes, only the first 8 bytes are displayed correctly. Ifconfig is obsolete! For replacement check ip. Should I quit using ifconfig? It is deprecated in favor of ip command? Or it will be update in the near future.

  Read the article

• Brocade 200E Switch - Fibre Channel

  - by Arthor

  What I have: Fujitsu-Siemens PRIMERGY BX600 Brocade 200E (16 port, 4gbit fibre). My question: Imagine a QNAP with a fiber 10GBIT card connected to the Brocade 200E (16 port, 4gbit fibre). Would this work; would the card drop down to 4GBIT? Are 10GBIT fiber cards backwards completable. Update. I have the specs of my server now.... Fujitsu-Siemens PRIMERGY BX600 S3 Blade Ecosystem Blade Chassis comprising; 2 x A3C40073243 Blade Management modules 2 x A3C40089238 GBE Switch Blade SB9F 30/12 2 x A3C40085736 4Gb 10 port pass through blades 1 x A3C40083767 Digital KVM Modules 2 x A3C40073245 Fan enclosures + cooling fans 4 x A3C40073262 Power Supplies My Goals and Objectives To have a blade system in place for 8 blades for video rendering, the other 2 for database and scripts etc The system will be built on VMWARE ESXi 5 Use ISCSI on the QNAP to support HA and vmotion if needed Users to access the qnap for video editing QANAP has 12 drive (2 x (6 HDD in RAID 10)

  Read the article

• unusual webpage access problem

  - by user28163

  This is one of the weirdest problems I've ever seen and I'm out of ideas. I cannot access a couple of websites from my home pc (for 3-4 days now), or at least they go really really slow ~700b/s I can access these same websites fine from my laptop from same IP address. - The websites originate from different countries and are huge popular sites. - I have tried both my PC's network cards. - I have reformatted my PC. - I have reset my router to factory settings. - I have created virtual computers on my PC, and from inside those I cannot access the webpages. - I have flushed my dns. - I tried specifying my dns server addresses to 8.8.8.8 and 8.8.4.4. I can only access the webpages using my PC, if I first connect to an outside VPN. Again, these sites work fine on the 2 other pcs in this house (same ISP and internet connection). help plz :)

  Read the article

• Is it possible to change the default scan folder on an Eye-Fi Wireless SD Card

  - by MichaelPh

  By default Eye-Fi cards scan the DCIM folder (and subfolders) used by most digital cameras for new images to upload. Is there a way of changing this to a different folder? In my particular case I'm using a Kodak photo scanner (P461) that uses a PHOTO(N) folder format to store the scanned images, as far as I know the device has no configuration interface to alter this setting so that doesn't seem to be an option. This topic on the Eye-Fi forums is the closest I've come to a solution, but a perfunctory investigation of Disk Probe doesn't make it obvious what needs to be modified on the card.

  Read the article

• fsck: FILE SYSTEM WAS MODIFIED after each check with -c, why?

  - by Chris

  I use a script to partition and format CF cards (connected with a USB card writer) in an automated way. After the main process I check the card again with fsck. To check bad blocks I also tried the '-c' switch, but I always get a return value != 0 and the message "FILE SYSTEM WAS MODIFIED" (see below). I get the same result when checking the very same drive several times... Does anyone know why a) the file system is modified at all and b) why this seems to happen every time I check and not only in case of an error (like bad blocks)? Here's the output: linux-box# fsck.ext3 -c /dev/sdx1 e2fsck 1.40.2 (12-Jul-2007) Checking for bad blocks (read-only test): done Pass 1: Checking inodes, blocks, and sizes Pass 2: Checking directory structure Pass 3: Checking directory connectivity Pass 4: Checking reference counts Pass 5: Checking group summary information Volume (/dev/sdx1): ***** FILE SYSTEM WAS MODIFIED ***** Volume (/dev/sdx1): 5132/245760 files (1.2% non-contiguous), 178910/1959896 blocks

  Read the article

• How do I configure networking on CentOS 6 running on hyper-v?

  - by LonelyLonelyNetworkN00b

  I'm not using legacy adapters, and i've installed Linux Integration Components 3.2. THe problem i'm facing is that the command 'setup' or 'system-config-network' doesn't list any network interfaces. If i run ifconfig -a i can see both the network cards i've attached. By setting a ip using ifconfig i can get network connectivity. The problem is that it's not persistent after a reboot. I'm a 100% centos newbie, but I figure it has something to do with that the centos installer couldn't see the NICs on install. How can I fix this?

  Read the article

< Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >