Search Results

Search found 93631 results on 3746 pages for 'chaotic one'.

Page 390/3746 | < Previous Page | 386 387 388 389 390 391 392 393 394 395 396 397  | Next Page >

• Running out of space on a SAS-based workstation

  - by SteveWilkinson

  Hi - first question on serverfault - pls excuse if asked elsewhere. I have a Dell Precision 690 with one 73GB (15000RPM) SAS drive in it. Running Windows 7 (x64) with a bunch of apps means it is running out of space. I have on order a 147GB (15000RPM) SAS drive (same GB/s, same make) which I want to put into the machine. Not knowing anything about SAS, do I need to replace the 73GB with the 147GB and restore from a backup, or can I put the drive in the machine and get the controller to treat the two drives as one large one? (The original paperwork for the machine says 73GB SAS (No RAID) if that is relevant.) Thanks in advance.

  Read the article

• Running out of space on a SAS-based workstation

  - by SteveWilkinson

  Hi - first question on serverfault - pls excuse if asked elsewhere. I have a Dell Precision 690 with one 73GB (15000RPM) SAS drive in it. Running Windows 7 (x64) with a bunch of apps means it is running out of space. I have on order a 147GB (15000RPM) SAS drive (same GB/s, same make) which I want to put into the machine. Not knowing anything about SAS, do I need to replace the 73GB with the 147GB and restore from a backup, or can I put the drive in the machine and get the controller to treat the two drives as one large one? (The original paperwork for the machine says 73GB SAS (No RAID) if that is relevant.) Thanks in advance.

  Read the article

• Under what circumstances might an IIS6 website be automatically deleted?

  - by E. Anderson

  Late last week my colleagues did some hardware maintenance on one of our vmWare esxi servers. One of the guests is a Windows Server 2003 Web Edition system that runs our low-traffic web sites. We discovered this morning that one of those websites was no longer working with what appeared to be an SSL error. After logging in, I found that the web site in question had been deleted from IIS! Is it possible for this to happen without a user actually going in and deleting that single web site? All of the other sites were fine. The files for the site in question had not been touched. I just re-created the web site, assigned the SSL cert, and everything was working again. When I logged in, I did see the 'Unexpected Shutdown' dialog.

  Read the article

• How to recover data from Dell dimension 9150 RAID 0 on another system?

  - by Adam

  I have a Dell Dimension 9150 which has failed. I'm trying to recover the data. It had two SATA 250GB drives in RAID 0 configuration. I'm trying to use a shuttle PC running Windows7 to recover the data from the drives which contained an XP boot volume. I just want the data, it doesn't have to boot. What program would I need to rebuild / interrogate the drives (one of them is failing the onboard hardware test)? What drivers would I need to install? Windows7 sees the drive as one partition but doesn't see volume information. Ubuntu can see the drive as one partition and also can tell what the drive is called, but can't access the data Any help appreciated!! :)

  Read the article

• Password History Storage and Variability Comparison

  - by z3ke

  I believe this situation would be similar to many others out there, so maybe some of you can shed some light... Supposedly, when making password changes through MS exchange every 90 days, you cannot use any simple variation of one of your old passwords, up to whatever limit the admin's set for a system. My question: If your previous passwords are only stored as hashes, how can they check for the "just changed one letter" case. Wouldn't they have to have access to the old plain-text passwords in order to make those comparisons? The only other thing I can think of is if upon original creation of a password, they also stored all other one character permutations of it, so that they can be banned later?

  Read the article

• Which simple server virtualization solution to use?

  - by vvanscherpenseel

  For one part of our hosting platform we are currently using VMware Server 2 to create two virtual machines on one physical machine. One VM is used for hosting of small websites, the other VM is used as a staging environment. Both the host OS and guest OSes run CentOS Linux. Support for VMWare Server 2 has been discontinued and we are currently looking for a replacement. We only use basic functionality (we don't use snapshots, moving around VMs to different physical machines, or other 'advanced' functionality'). Just a box, with two VMs. We are looking for a virtualization solution that has long-term support, is stable and allows configuration/management from Mac OSx (I understood that Xen only has a Windows client). What would be the right solution for us?

  Read the article

• What program can I use to make animated videos with Mac?

  - by cwd

  I've seen a lot of these cool info-diagram style voice-over videos like this one for Google Plus One: http://www.youtube.com/watch?v=OAyUNI3_V2c&feature=player_embedded What types of tools are required to make something like that? Related to that, what programs are good for creating and editing screen casts on Mac? I am only familiar with Camtasia, maybe snapxpro (and Jing, which I think may only be for PC). I would mostly like to create a video like the one above, but if I could add in a few seconds of a screen-cast that would be nice.

  Read the article

• Force Windows 8 Metro apps to run lower resolutions below 1024x768?

  - by piokuc

  I have installed Windows 8 Consumer Preview on my Samsung NB30 netbook. I was very excited to try it on this little box cause it has a touchscreen and Windows 8 is supposed to be optimized for touchscreen devices. The installation was quick and smooth and all the drivers seem to work well including the one for the touchscreen. There is one major problem, though: when I try to tap one of the tiles on the Metro UI it displays This app can't open. The screen resolution is too low for this app to run. The machine has Intel Atom N450 processor and Intel GMA 3159 integrated graphics card and has maximum resolution 1024x600. I've read that Metro requires at least 1024x768. Is there a solution to this problem? Is there a way to force Windows 8 Metro apps to run in lower resolutions?

  Read the article

• Is there a way to sharpen low quality images

  - by Saif Bechan

  I have a lot of images for a project that are not really sharp and crisp. I think these were old images that were resized a lot etc. This is because I am working on a website for a client and she does not have the high quality pictures anymore, the pictures I have to work with are somewhat pixelated. Ill show you an example of one I think could be better: Now as you can see the parts around the text 'Azule' is not so sharp. Is there a way to sharpen this. Now I have another one, and I think there is no hope for this one. Is there any hope for the picture above to make it sharp again, I highly doubt it.

  Read the article

• Kill child process when the parent exits

  - by kolypto

  I'm preparing a script for Docker, which allows only one top-level process, which should receive the signals so we can stop it. Therefore, I'm having a script like this: one application writes to syslog (bash script in this sample), and the other one just prints it. #! /usr/bin/env bash set -eu tail -f /var/log/syslog & exec bash -c 'while true ; do logger aaaaaaaaaaaaaaaaaaa ; sleep 1 ; done' Almost solved: when the top-level process bash gets SIGTERM -- it exists, but tail -f continues to run. How do I instruct tail -f to exit when the parent process exits? E.g. it should also get the signal. Note: Can't use bash traps since exec on the last line replaces the process completely.

  Read the article

• SBS 2003 CEICW - Multiple IP's causing error

  - by mushmush

  two IP adresses (different subnets) are assigned to one networkcard. In the Properties window the order is right, however the Server always picks the wrong one as the "default ip". This causes CEICW to fail with an "The DHCP Server service is started, but the DHCP scope does not match the network address of the server's local area network (LAN) adapter." error. The DHCP Server is installed and configured, but not for the other subnet as it is not needed. If i remove the other subnets IP everything works fine. Is there any way around that without temporarily removing the IP adress or configuring DHCP for one more Subnet?

  Read the article

• If a change the CPU, must I reinstall the OS?

  - by dag729

  Hi, as suggested by the title, I want to change CPU: actually I have two computers, one with Ubuntu running on an AMD Athlon 64 dual core 5200+ and the other with FreeBSD running on an AMD Sempron single core LE-1250. I would like to swap (I am not sure that this is the correct term...) the CPUs from one computer to the other one, that is take the dual core from the ubuntu pc and put it inside the freebsd pc and viceversa. The mobo is the same. Do you think I will encounter problems?

  Read the article

• Data transfer is extrem slow after partitioning extern usb drive

  - by user125912

  I bought an extern usb 3.0 drive with 500 gb capacity. OS is Windows 7. I use it with an usb 2.0 slot, no prob. Initially I used it without making several partitions and it was fast as hell. Then I had the great idea to make partitions, one for programs, one for data and one for backup. I chose the free EASEUS Partition Master 9.1.1. and ended up with these partitions: F:Apps, primary, NTFS, 100gb H:Data, logic, NTFS, 250gb B:Backup, logic, NTFS, 150gb THE PROBLEM: When I copy files from C: to F: I get a transfer rate of about 100 KB/S ! When I copy files from C: to H: I get a transfer rate of about 4 MB/S ! thats all muuuch to slow, slower then before. What can I do to speed the shit up? Thanks in advance!

  Read the article

• Excel: make comma separated list from column with blanks, fed by checkboxes

  - by Crystal

  I want to make a spreadsheet where user can check boxes on one worksheet, and have those values then be brought over, comma separated, into one cell, on another worksheet. The values of the checkboxes have to be capable of changing as a new row entry is made on the first spreadsheet. I have the associated name text of the checkboxes populating into an adjacent column when the box is checked (TRUE). This column is the one I want to pull the text from. I want it to also ignore blanks, and not include extra commas. I am not familiar with VBA, but with some hand holding, I could use some. Clever formula approaches also welcome! Thanks!

  Read the article

• Cutting up videos (excerpting) on Mac OS X -- iMovie produces super-large files

  - by markvgti

  I need to cut out parts of a video (+ the associated audio, of course) to make a short clip. For example, take 2 minutes from one location, 3 minutes from another part of the video, 30 seconds from another location and join it all together to form one single clip. The format of the input video is mp4 (H.264 encoding, AFAICR). Don't need very sophisticated merges or transitions from one part to the next, or sophisticated banners (text) on-screen, but some ability to do so would be a plus point. I've done this with iMovie in the past, but where the original file was under 5MB/min of play time, the chopped-up version was over 11MB/min of play time, which to me seems really bad. Is there a better/different way of doing this on OS X? Looking for free (gratis) solutions. OS: OS X 10.9.3

  Read the article

• What does SQL Server do if you select more than 1 full backup when doing a restore?

  - by Rob Sobers

  I have a backup file that contains 2 backup sets. Both backup sets are full backups. When I open SQL Server Management Studio and choose "Restore..." and pick the file as my device, it lets me pick both backup sets. The restore operation completes without error, but I'm not sure exactly what SQL server did. Did it restore the first one, drop the database, and then restore the second one? Will it always let the most recent full backup prevail? It doesn't seem to make sense for SQL server to even allow you to select more than one full backup.

  Read the article

• Windows 7 - saved wifi access points disappear from list

  - by KáGé

  I'm having a weird issue with Windows 7 x64: I'm moving my notebook between two locations weekly, at each I have a wifi router. They both have hidden SSID-s, which are different. If I save one, the other one gets deleted from the list, as if overwritten, so I always have to retype the SSID and password, if I want to connect after moving my computer. At first I tought the problem was caused by both routers having the same password, but after I changed one (suffixed it with "_2") it persisted. What can I do about this? Thanks.

  Read the article

• How to partition my hard drive, quicker?

  - by Sam

  When I install Windows 7 on my hard drive, it makes three partitions. One with the OS itself, one with bootmgr inside (that is 100 MiB), and one with the factory image (all the crapware from HP). My final goal is to have the OS on a partition of 100 GiB and keep the rest (900 GiB) for storage. I thought it would be easy using gparted, but it is taking so long. It will take hours. There must a way to partition the drive before installing Windows. Yeah, because what I think makes the shrinking/moving of the partitions take so long is because they are not empty (am I wrong?).

  Read the article

• SQL Distributed Reporting Services Setup

  - by Praesagus

  I am setting up two servers; one iis 7 and one sql 2008. I need to use reporting services. What is the best way to set up reporting services so that my iis box can serve the reports. I'm sure this is not an unusual configuration, but I'm having a lot of trouble finding an answer to this - probably because I am using the wrong terminology. Also does this configuration require two sql licenses (one for each server)? This sound like a lengthy explanation so links or even the correct terminology for this so I can find the answers myself would be much appreciated. Thanks

  Read the article

• Can an UPS be too powerful?

  - by Andy

  Our old network admin bought the top range UPS a few months ago but never came around to setting it up and is no longer with the company. Now the old UPS broke down and needs to be replaced, but an external company that did an audit said that that UPS won't work. Now we are no hardware specialists, but the difference in specs is a higher output from 5A to 8.8A meaning a higher output. But isn't the UPS supposed to give the server the required output anyway? This 'independent' audit does sell its own hardware including UPSes so I'm not sure how much bias they have. Is there a reason why we can't replace the old broken UPS with the new more powerful one? Is there a way we can check to see if the UPS works with our server? ok, i wrote down the numbers again, the Volts and Amps are what are on the back (where you connect up the plugs which seem diffrent from on the front label.) old one APC SmartUPS 1500 220-240V -- 6.8A new one Dell UPS 1920W 250V -- 10A

  Read the article

• Share the DVB card on windows 7 [closed]

  - by Bashar Kernel

  I have 2 computers connected to a router and I have a DVB card in one of them. I want to use the one DVB card to feed both of them. I read about it and I know that I want to share the DVB adapter with the Internet Connection Sharing on the LAN network. But when I use the connection sharing, I lose my internet access I tried to use "Bridge Connection", but then I also lost my internet access too. Can any one tell me how to fix this problem? And how to view the channels (for example how to use the VLC)?

  Read the article

• Openvpn client-to-client connection reencrypted at Server?

  - by user1684411

  currently i'm using a site-2-site openvpn setup. The routers en/decrypt all traffic that goes from one net to another. One of them is the Openvpn server. This works but performance is not as good as possible. I think the limiting factor is the cpu power of the router. Would it be better if i use client-to-client connections and access the fileserver in the one net from a pc in the other, because the openvpn-server does not have to decrypt the (whole) packets?

  Read the article

• Is it possible to stream music/video from an Apache server?

  - by rphello101

  I'm just starting to get into setting up a server. I've set up a basic Apache server to access some songs and movies. When I click one of the songs though, nothing happens. When I click one of the movies, sometimes it will open a new web page and act as though it is going to start playing, but never does. I know Apache is HTTP, not FTP and read somewhere that that could be a problem, but I'm uncertain of the differences. Anyway, is it possible to click on one of the songs and have it start streaming using, for example, Windows Media Player? If so, might someone either explain how to do so or direct me to where I can find it? Any information on retrieving media from an Apache server at this point would be most appreciated. -Edit- I don't know if it matters, but I'm using Windows 7 and Google Chrome

  Read the article

• High IO latency on ESXi 4.1 on HP DL580 G7

  - by teddydestodes

  at my Company we were experiencing some weird spikes on IO latency on one of our ESXi instances. we've spend 24h figuring out whats wrong and no clue so far. after giving up we put all the disks into a different server (HP DL380 G7) with much less RAM and only one 6(HT) cores (from 12 on the DL 580) which run fine for about 2 hours. I dont know the specs for the DL380 but both servers have a Smart Array P410i with BBWC (the DL 580 has 1GB) Is it possible that one(or all) of the disks is failing without actually failing?

  Read the article

• Shaping with shorewall complex shaper not work (or I don't understand principle of operation)

  - by strangeman

  I have router (Debian 6) with 2 network interfaces (and 1 virtual tun interface): eth0 - localnet, 192.168.1.0/24, router ip is 192.168.1.1 eth1 - internet tun0 - openvpn to central office. openvpn network - 10.1.0.0/24, central office network - 192.168.0.0/24 I need shape all traffic, which moves 192.168.1.0/24-192.168.0.1:6666 and 192.168.1.0/24<-192.168.0.1:6666, and restrict its speed to 200kbit. Now, I have this configuration, but its not work: tcdevices (set up interface parameters) #INTERFACE IN-BANDWITH OUT-BANDWIDTH eth0 100mbit 100mbit #LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE tcrules (mark all traffic, which move on 6666 port) #MARK SOURCE DEST PROTO PORT(S) 1 0.0.0.0/0 0.0.0.0/0 tcp 6666 #LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE tcclasses (shape all marked traffic) #INTERFACE MARK RATE CEIL PRIORITY OPTIONS eth0 1 200kbit 200kbit 2 eth0 255 9*full/10 full 1 default #LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE Where is my mistake?

  Read the article

< Previous Page | 386 387 388 389 390 391 392 393 394 395 396 397  | Next Page >