Search Results

Search found 17913 results on 717 pages for 'old school rules'.

Page 390/717 | < Previous Page | 386 387 388 389 390 391 392 393 394 395 396 397  | Next Page >

• Can I use a wireless-N laptop as an NAS for seamless and fast data transfer and access?

  - by techaddict

  I have a nice spare laptop (Dell 15R, one year old) that I was wondering if I could use as an NAS. The laptop has an E-Sata port, and I was wondering if I could set it up and plug in a few hard drives permanently (meaning I won't be unplugging it) to the eSata port and use the laptop as a wireless NAS to seamlessly and wirelessly store and access my files. To see more about what I'm looking for in the NAS to see if it's possible to use my other laptop for this purpose, see my other question: Is it possible to have a wireless in-house NAS with wireless data transfer rates of equivalent to SATA speeds? Alternatively, would it be better to sell the laptop and buy a dedicated NAS?

  Read the article

• Serial number not found, copy of Windows not genuine

  - by sara

  I have an HP-G71-340US notebook that I purchased 11/29/09. When I power it up, a black screen comes on that shows "serial number not found" and it also says that my copy of Windows 7 Home Basic is not genuine – but my computer came with Windows 7 Home Premium. In BIOS, my serial number is not shown either and I did pull out the little battery to reset it which allowed me to bypass the suddenly new locked BIOS that needed a password to enter. I'm sure this is a masterpiece created by my 6 or 9 yr old child while trying to play on my laptop. Can I fix these two problems?

  Read the article

• Prolific USB-to-Serial Comm Port significantly slower under Windows 7 comparing to Windows XP

  - by Dmitry S

  I am using a Prolific USB-to-Serial adapter based on the Prolific chip to use with a device on serial port. I have the latest version of the driver installed: 1.3.0 (2010-7-15). When I use my device with this adapter on my main Windows 7 (32bit) system it takes 8-9 seconds to send a command through to the device. However, when I do the same thing on a different Windows XP system (an old laptop I borrowed for testing) it only takes 2-3 seconds. I have made sure that the port settings and other variables are the same between systems. I also tested on a third laptop (also running Windows 7) and again got a significant delay. So the question is if anyone else experienced the same problem and found a solution. I would like to avoid moving to an XP system for what I need to achieve so that's my last option.

  Read the article

• How to create a readonly root linux: Can be mounted as writeable for persistent changes?

  - by Mr Anderson

  I'd like a read only file system that runs almost entirely in RAM but the compact flash or hardrive can be mounted and made writeable to make persistent changes. How do I do this on Linux? I've looked at several tutorials but none really explain how to create such a system with the option of being able to mount the storage device and make persistent changes. I looked at this so far: http://chschneider.eu/linux/thin_client/ I also looked on the old gentoo wiki but the article was very specific to Gentoo. I'll be using a debian based Linux but it would be nice I've someone could explain to me how to do this in pretty generic instructions ,that would work on any Linux distro. Thanks.

  Read the article

• Streaming video from a point-and-shoot camera that doesn't support it

  - by egasimus

  I have a Canon IXUS 120is (PowerShot SD940) - a nice digital camera that's a couple of years old. It does record fairly decent video, but, alas, can't function as a webcam - and I need to stream video over the Web. I've installed CHDK on it, and while it's quite flexible, doesn't seem to provide a solution to my problem. I suppose that the video footage is written to the SD card in real time - is there a hack that allows me to monitor the file as it is written, and broadcast its contents over the Internet? Perhaps connecting its the camera's slot to my laptop's card reader via SDIO? I'm running Windows, but I'm roughly familiar with Linux; another question has suggested a file-to-/dev/video driver - do such tools exist?

  Read the article

• Raid HDD Boot up

  - by user234695

  My server is Power Edge 1950 running server 2008 32Bit, using 3 Physical SAS HDD as a Virtual 2 Disk configured for RAID5, with partition of C drive as OS and D drive as Data. Planning to format and install Server 2008 R2 64Bit so I insert a New Physical disk and configured as RAID5 and clone the C drive and D drive to the new hard disk. Now I need to test that the new hard disk is able to boot windows and work as expected. How do I test, I am not able to boot the windows by choosing the new harddisk, the bios show only the existing HDD, not the new one. Also, if I remove the old three hard disk, and leave the new harddisk and then am I able to boot the device, if I do this does my existing RAID5 configuration and data on the hard disk still remain.

  Read the article

• How to change font/number/bullet format for the whole list

  - by Nam Gi VU

  Hi, Let's look at a sample word 2010 file here. In this file you can see that the first group of text has their indent modified. The 2nd, 3rd group keep their default format. I want to apply the changed I've made in the group 1st so group 2nd and 3rd and for the new group I'm going to add instead of recieving the default indent. How can I do that? ps. Currently what I have to do is quite boring: Copy group 1 and paste to create new group to get the formatted, then remove the old text, adding new text :(

  Read the article

• Best way to keep a MS DOS application alive? (Virtual MS DOS)

  - by user11010

  Hi, I have a good old DOS application which is still required to run. Unfortunately the PC is dying and needs to be replaced. The PC was running Windows 98 and the software was executed in a MS Dos Command line. When we would order a new PC you would at least get a Windows XP which has the Win 2000 (NT) Kernel and is not DOS based. Now I need a strategy to be able to run a that DOS application on a new age PC. What I was thinking is to buy a standard office box and have a virtual PC or VMware setup which is running MS DOS and my DOS application? Would this be a way to go? Any concerns? What about 16Bit/32Bit… So any opinion, experiances or tip would be great …. Thanks

  Read the article

• Add MS-DOS boot option to Windows 2000

  - by Ben Miller

  I've got an old laptop that is running Windows 2000 & Windows 98 in a multi-boot configuration. I need to add MS-DOS to that list of startup options. I've already added a primary partition, formatted it for FAT16 and made it bootable, and installed MS-DOS 6.22. My question is, how do I add my MS-DOS partition to the list of startup options? More information: My single hard drive has three primary partitions: 0: FAT32 Windows 2000 1: FAT32 Windows 98 2: FAT(16) MS-DOS 6.22 Currently, the boot-up screen lists Windows 2000 and Windows 98 as options, with Windows 2000 as the default choice. My boot.ini file currently looks like this: [Boot Loader] Timeout=30 Default=multi(0)disk(0)rdisk(0)partition(1)\WINNT [Operating Systems] multi(0)disk(0)rdisk(0)partition(1)\WINNT="Microsoft Windows 2000 Professional" /fastdetect C:\="Microsoft Windows 98"

  Read the article

• ADSL connetion (BSNL dataone) with puppy Linux

  - by Vaibhav Garg

  I have an old PC which I want to use for internet browsing. I tried using Puppy Linux (version 4.3.1) for the same but have not been able to connect. I connect via PPPoE. My network card is RTL 8029b which is automatically detected by Puppy Linux. However, the LED indicator on the MODEM designating LAN connectivity stays off. This post is being typed from the same PC running XP, so there are no connection issues. I am a complete newbie for Linux. can somebody point me to instructions. I will be willing to give any more information if required. P.S. My MODEM is Huewei Smartax MT 882 Thanks

  Read the article

• Plugin 'InnoDB' registration as a STORAGE ENGINE failed. On win 7

  - by NimChimpsky

  I have had to reinstall MySQL, however the service is failing to start with the above cause listed in evnt viewer. One solution is apparently to delete a couple of files prefixed with 'ib_logfile' which represent any old databases. However I do not have these files, and my service is still failing to start ... ? When I say I don't have these files I did a search using the windows search with zero results, and they are definitely not present in my mysql install directory. And I don't have the "documents and setting/appilcation data' folder referenced in link. In fact I only have only one mysql install directory, I know where that is - what do I need to delete/change ? The instance is configured OK, I ran that as administrator and it is listed in services, but the service itself fails to start Any tips, other than going over to postgresql ?

  Read the article

• Disable DirectDraw, but still have Direct3D?

  - by GodsBoss

  I have a Windows XP SP3 machine, with up-to-date patches. It has DirectX 9.0c, version number 4.09.00.0904. Can I disable DirectDraw, but have Direct3D still active? I read the Wikipedia articles about DirectDraw and Direct3D, but do not know if I understand them correctly: That is, it contains many commands for 3D rendering; however, since version 8, Direct3D has superseded the old DirectDraw framework and also taken responsibility for the rendering of 2D graphics. Does that mean DirectDraw is now a part of Direct3D? Because I cannot disable DirectDraw without disabling Direct3D, but it works the other way around.

  Read the article

• Will a database server perform better running on 2 CPUs with 16 cores or 4 CPUs with 8 cores?

  - by AlexOdin

  What I have: an online financial application (ASP.NET, C#) at peak we have 5K+ simultaneous users backend is running on Oracle 11g (active server + stand-by using Active Data Guard). At peak - 4K-5K database sessions Oracle is installed on Linux 5.8 (Oracle's unbreakable version) the database size: 7TB disk storage: NetApp (connected with 10GB network) I would like to replace old servers (IT will purchase HP blades BL685C). Servers will have 256GB of RAM. I need your help to figure out what to do with CPUs and cores. Options: 2 CPUs (2.3 GHz) with 16 cores each 4 CPUs (3.0 GHz) with 8 cores each Question: Which one should I pick? P.S. Next year, we will migrate from Oracle to SQL server. I hope, whatever option you recommend will work for both platforms

  Read the article

• Getting GTalk and Alt-Tab to play nice

  - by Steve Armstrong

  I'm running GTalk on Windows 7, and it refuses to work properly with Alt-Tab. Let's say I've got 2 message windows open (msg1 and msg2) and the contact list, as well as Firefox. Alt-tab from Firefox to msg1 works, but now the contact list is the most recent thing in the alt-tab list (not Firefox as expected). Then there's the problem that I can't use alt-tab to select a specific message window, and when switching back to msg2 (showing msg2 in the alt-tab window) it might switch back and have focus on msg1. I found this thread complaining about the same problem, but it's over a year old, and I'm hoping some progress has been made.

  Read the article

• How do I disable Tomcat? [closed]

  - by Dave King Popeye Mason

  Possible Duplicate: How to disable Tomcat on linux? According to my server host, something called Tomcat is hogging all my resources and slowing down the server. As far as I'm aware I'm not using it as the only thing running on the server is Plesk and a few Wordpress installations. I'm a real dummy at using SSH, I can navigate to folders, change permissions and that's about it. Could somebody explain to me as if I'm a 5 year old how to disable TomCat (and also how to stop it re-enabling on startup)? Thanks!

  Read the article

• Again WPA Connection problem even after changed to latest version ..please help

  - by Renjith G

  I am using hostapd, wireless tools with madwifi for my wireless ap in my board. The WEP, WPA-PSK connections and communications between my board with linux and my desktop PC, Windows XP SP2 (with Olitec USB wireless) are fine. But when I configured the WPA type, the connection seems established but shows the status "TKIP - Key Absent" in the security dialog box. Anyone faced this problem? Am attaching the conf files and the connection status. In the AP side am complaining . I am using the in built radius server conf with the hostapd 0.4.7 hostapd.conf interface=ath0 driver=madwifi logger_syslog=0 logger_syslog_level=0 logger_stdout=0 logger_stdout_level=0 debug=0 eapol_key_index_workaround=1 dump_file=/tmp/hostapd.dump.0.0 ssid=Renjith G wpa wpa=1 wpa_passphrase=mypassphrase wpa_key_mgmt=WPA-EAP wpa_pairwise=TKIP CCMP wpa_group_rekey=600 macaddr_acl=2 /* commented */ ieee8021x=1 /* commented */ eap_authenticator=1 own_ip_addr=172.16.25.1 nas_identifier=renjithg.com auth_server_addr=172.16.25.1 auth_server_port=1812 auth_server_shared_secret=key1 ca_cert=/flash1/ca.crt server_cert=/flash1/server.crt eap_user_file=/etc/hostapd.eap_user hostapd.eap_user "*@renjithg.com" TLS And the commands am using are wlanconfig ath0 create wlandev wifi0 wlanmode ap iwconfig ath0 essid Renjith channel 6 ifconfig ath0 192.168.25.1 netmask 255.255.255.0 up hostapd -ddd /etc/hostapd.conf Please correct if am wrong .. Also am getting the debug messages on my AP when am connecting in my windows machine through WPA ~/wlanexe # ./hostapd -ddd /etc/hostapd.conf Configuration file: /etc/hostapd.conf Line 18: obsolete eap_authenticator used; this has been renamed to eap_server madwifi_set_iface_flags: dev_up=0 Using interface ath0 with hwaddr 00:0b:6b:33:8c:30 and ssid 'Renjith G wpa' madwifi_set_ieee8021x: enabled=1 madwifi_configure_wpa: group key cipher=1 madwifi_configure_wpa: pairwise key ciphers=0xa madwifi_configure_wpa: key management algorithms=0x1 madwifi_configure_wpa: rsn capabilities=0x0 madwifi_configure_wpa: enable WPA= 0x1 madwifi_set_iface_flags: dev_up=1 madwifi_set_privacy: enabled=1 WPA: group state machine entering state GTK_INIT GMK - hexdump(len=32): 9c 77 cd 38 5a 60 3b 16 8a 22 90 e8 65 b3 c2 86 40 5c be c3 dd 84 3e df 58 1d 16 61 1d 13 d1 f2 GTK - hexdump(len=32): 02 78 d7 d3 5d 15 e3 89 9c 62 a8 fe 8a 0f 40 28 ba dc cd bc 07 f4 59 88 1c 08 84 2b 49 3d e2 32 WPA: group state machine entering state SETKEYSDONE madwifi_set_key: alg=TKIP addr=00:00:00:00:00:00 key_idx=1 Flushing old station entries madwifi_sta_deauth: addr=ff:ff:ff:ff:ff:ff reason_code=3 Deauthenticate all stations l2_packet_receive - recvfrom: Network is down Wireless event: cmd=0x8c03 len=20 New STA WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 WPA: 00:0a:78:a0:0b:09 WPA_PTK_GROUP entering state IDLE WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION2 IEEE 802.1X: 4 bytes from 00:0a:78:a0:0b:09 IEEE 802.1X: version=1 type=1 length=0 Wireless event: cmd=0x8c04 len=20 madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 ioctl[unknown???]: Invalid argument WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state DISCONNECTED WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 ioctl[unknown???]: Invalid argument Wireless event: cmd=0x8c03 len=20 New STA WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 WPA: 00:0a:78:a0:0b:09 WPA_PTK_GROUP entering state IDLE WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION2 IEEE 802.1X: 4 bytes from 00:0a:78:a0:0b:09 IEEE 802.1X: version=1 type=1 length=0 < Register Fail < Register Fail Wireless event: cmd=0x8c04 len=20 madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 ioctl[unknown???]: Invalid argument WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state DISCONNECTED WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 ioctl[unknown???]: Invalid argument Wireless event: cmd=0x8c03 len=20 New STA WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 WPA: 00:0a:78:a0:0b:09 WPA_PTK_GROUP entering state IDLE WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION2 IEEE 802.1X: 4 bytes from 00:0a:78:a0:0b:09 IEEE 802.1X: version=1 type=1 length=0 NOW am getting the following error message with latest tools. *This is the latest error messages..please refer this only..* ~/wlanexe # ./hostapd -ddd /etc/hostapd.conf TLS: Trusted root certificate(s) loaded madwifi_set_iface_flags: dev_up=0 madwifi_set_privacy: enabled=0 BSS count 1, BSSID mask ff:ff:ff:ff:ff:ff (0 bits) Flushing old station entries madwifi_sta_deauth: addr=ff:ff:ff:ff:ff:ff reason_code=3 ioctl[IEEE80211_IOCTL_SETMLME]: Invalid argument madwifi_sta_deauth: Failed to deauth STA (addr ff:ff:ff:ff:ff:ff reason 3) Could not connect to kernel driver. Deauthenticate all stations madwifi_sta_deauth: addr=ff:ff:ff:ff:ff:ff reason_code=2 ioctl[IEEE80211_IOCTL_SETMLME]: Invalid argument madwifi_sta_deauth: Failed to deauth STA (addr ff:ff:ff:ff:ff:ff reason 2) madwifi_set_privacy: enabled=0 madwifi_del_key: addr=00:00:00:00:00:00 key_idx=0 madwifi_del_key: addr=00:00:00:00:00:00 key_idx=1 madwifi_del_key: addr=00:00:00:00:00:00 key_idx=2 madwifi_del_key: addr=00:00:00:00:00:00 key_idx=3 Using interface ath0 with hwaddr 00:0b:6b:33:8c:30 and ssid 'RenjithGwpa' SSID - hexdump_ascii(len=11): 52 65 6e 6a 69 74 68 47 77 70 61 RenjithGwpa PSK (ASCII passphrase) - hexdump_ascii(len=12): 6d 79 70 61 73 73 70 68 72 61 73 65 mypassphrase PSK (from passphrase) - hexdump(len=32): a6 55 3e 76 94 8b d9 81 a1 22 5e 24 29 83 33 86 11 a8 7e 93 19 7c a9 ab ab cc 12 58 37 e5 35 b6 RADIUS local address: 172.16.25.1:1024 madwifi_set_ieee8021x: enabled=1 madwifi_configure_wpa: group key cipher=1 madwifi_configure_wpa: pairwise key ciphers=0xa madwifi_configure_wpa: key management algorithms=0x1 madwifi_configure_wpa: rsn capabilities=0x0 madwifi_configure_wpa: enable WPA=0x1 WPA: group state machine entering state GTK_INIT (VLAN-ID 0) GMK - hexdump(len=32): [REMOVED] GTK - hexdump(len=32): [REMOVED] WPA: group state machine entering state SETKEYSDONE (VLAN-ID 0) madwifi_set_key: alg=TKIP addr=00:00:00:00:00:00 key_idx=1 madwifi_set_privacy: enabled=1 madwifi_set_iface_flags: dev_up=1 ath0: Setup of interface done. l2_packet_receive - recvfrom: Network is down Wireless event: cmd=0x8b1a len=24 Wireless event: cmd=0x8c03 len=20 New STA ioctl[unknown???]: Invalid argument madwifi_process_wpa_ie: Failed to get WPA/RSN IE Failed to get WPA/RSN information element. Data frame from not associated STA 00:0a:78:a0:0b:09 Wireless event: cmd=0x8c04 len=20 Wireless event: cmd=0x8c03 len=20 New STA ioctl[unknown???]: Invalid argument madwifi_process_wpa_ie: Failed to get WPA/RSN IE Failed to get WPA/RSN information element. Data frame from not associated STA 00:0a:78:a0:0b:09 Data frame from not associated STA 00:0a:78:a0:0b:09 Data frame from not associated STA 00:0a:78:a0:0b:09 Wireless event: cmd=0x8c04 len=20 Wireless event: cmd=0x8c03 len=20 New STA ioctl[unknown???]: Invalid argument madwifi_process_wpa_ie: Failed to get WPA/RSN IE Failed to get WPA/RSN information element. Data frame from not associated STA 00:0a:78:a0:0b:09

  Read the article

• Hypervisor for mixed client and server OSes

  - by Mark

  I need to replace three old boxes I use for development, running Linux, Win Server and Win XP. Instead of purchasing three new boxes I am thinking of purchasing a single box and virtualizing the OSes. As it is for development, absolute performance is not a problem, but I want the Linux and Win servers to run continuously, while running Win 7 as if it is a regular PC. Therefore running Linux and Win Server on top off Win 7 is not an option. Is this a viable solution? Has anyone done this? What is performance like? I'd like to get decent graphics performance with Win 7, sufficient to run the occasional game. If so, I'm looking for suggestions or recommendations on which hypervisor or virtualization option to go for.

  Read the article

• Mac OSX server command equivalent for dhclient?

  - by John Hall

  Is there an MacOS command that makes a dhcp request, and renews the old lease, drops it for a new one, or usefully reports errors or lack of response from a dhcp server? This would both help fix networking on the machine after problems on the network without rebooting and would also be useful to diagnose wider networking problems from a mac. I can not find any command equivalent of dhclient though obviously some component must be serving this purpose. The question is, is that component exposed to a command line interface? I am biased to the command line for these features and may have overlooked settings panels or tools that might solve it using a gui interface. I believe this question is at the heart of this other question: Is there an equivalent command for 'init.d/networking restart' in OS X

  Read the article

• What does the -P option do to mount?

  - by Simon

  I'm migrating from an archaic version of Red Hat to Ubuntu 9. When going through my old nfs mount script, I found that it contained the -P option. So my script looks like: sudo mount -t nfs -o -P ... It looks like the -P is one of the -o options. My question is: what does the -P option do? I've searched every man page I can find, with no luck. Could it have to do with privileged ports?

  Read the article

• Alternative, more efficient scraping method for a noncoder, than Google doc's importxml and xpath?

  - by binarybunny

  I've searched throughout the net for a simple solution, but it seems everyone has their own unique method (coding language) of achieving this. I'm only just beginning to learn Linux, and my coding skills are thoroughly lacking (non-existent). I love the simplicity of using importxml and xpath, but copying and pasting values after reaching the spreadsheet limit of 50 is getting old. Now that I've seen the light, I would really just like to know of a simple, yet scalable solution to get more data into more spreadsheets/databases. Before I really start getting my hands dirty, I would love to know some of the ways you guys go about accomplishing this?

  Read the article

• How to reset mac PRAM through the command line in Lion/Mountain Lion?

  - by boneyjellyfish

  I'm trying to write a script to automate a PRAM reset and I've seen a lot of old guides that tell me to use the following command to reset the Mac's PRAM via the terminal: nvram boot-args="-p -r" But this command doesn't seem to work anymore, at least not on any of the computers I've tried it on. I'm trying to find a more up-to-date list of available boot-args and I was able to find this question about boot-args strings but there doesn't seem to be anything in there or any of the links about resetting the pram. Any ideas?

  Read the article

• Invoking mercurial commands for all directories in a given directory

  - by sasuke

  Hi folks! Let's say I have around 10 hg repositories cloned in a parent directory (let's call it "parent"). Is there any way I can invoke a mercurial command like hg status on all of the sub-directories rather than performing the laborious act of cding into each directory and then invoking hg status. JFTR, I did try out the good old xargs but for some reason it fails to work. The commands which I used are: find . -maxdepth 1 -type d -print | xargs -t "hg status" and ls | xargs -t "hg status" Any help would be appreciated, TIA. -Sasuke

  Read the article

• Monitor blinks frequently

  - by Eric J.

  I recently resolved an issue that was causing one monitor not to be recognized by Windows by running a tool called Driver Sweeper to remove all old driver remnants, then updating to the latest nVidia drivers. Prior to that procedure the main monitor worked fine. After that procedure (now with the second monitor recognized), the main monitor blinks frequently. About once every 15-30 seconds, the monitor goes dark for the blink of an eye. Sometimes it only appears to happen in the bottom portion of the monitor, but other times it seems to affect the whole screen. Can this be caused by the particular driver? Could it just be an unlucky coincidence and the main monitor is starting to fail? I hesitate to experiment with new driver versions after having just restored the second monitor to a working state, so hope for some feedback before heading down that road.

  Read the article

• PHP make install seems to end abruptly and does not update libphp5.so

  - by matt74tm

  I'm trying to compile PHP 5.3.3 and after a lot of ups and downs, I finally did 'make' it followed by 'make install' which just shows this: root@server [/tmp/php-5.3.3]# make install Installing PHP SAPI module: cgi Installing PHP CGI binary: /usr/bin/ Installing PHP CLI binary: /usr/bin/ Installing PHP CLI man page: /usr/share/man/man1/ Installing shared extensions: /usr/lib64/20090626/ Installing build environment: /usr/lib64/build/ Installing header files: /usr/include/php/ Installing helper programs: /usr/bin/ program: phpize program: php-config Installing man pages: /usr/share/man/man1/ page: phpize.1 page: php-config.1 /tmp/php-5.3.3/build/shtool install -c ext/phar/phar.phar /usr/bin ln -s -f /usr/bin/phar.phar /usr/bin/phar Installing PDO headers: /usr/include/php/ext/pdo/ It does not look like its done, because /usr/lib64/httpd/modules/libphp5.so still shows an old date: -rwxr-xr-x 1 root root 3193768 Mar 31 2010 libphp5.so

  Read the article

• WebDAV "PROPFIND" exception in IIS due to network share?

  - by jacko

  Hi all, We're finding continuous exceptions in our event viewer on our live box to the following exception: [snippet] Process information: Process ID: 3916 Process name: w3wp.exe Account name: NT AUTHORITY\NETWORK SERVICE Exception information: Exception type: HttpException Exception message: Path 'PROPFIND' is forbidden. Thread information: Thread ID: 14 Thread account name: OURDOMAIN\Account Is impersonating: True Stack trace: at System.Web.HttpMethodNotAllowedHandler.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) Other Specs: Windows Server 2003 R2 & IIS 6.0 We've narrowed it down to occuring when people try to access shares on the box from within the network, and have discovered (we think) that its due to the WebDAV web services extension being previously disabled by past staff. The exceptions are being thrown when trying to access directories that are virtual dirs in IIS, and plain old UNC network shares What the implications for enabling the WebDAV extensions on our live web server? And will this solve our problems with the exceptions in our event log?

  Read the article

< Previous Page | 386 387 388 389 390 391 392 393 394 395 396 397  | Next Page >