Search Results

Search found 16801 results on 673 pages for 'task manager'.

Page 390/673 | < Previous Page | 386 387 388 389 390 391 392 393 394 395 396 397  | Next Page >

• Intel hybrid graphics stuck in power save mode

  - by OZZIE

  I have an Asus UL30V with Intel hybrid graphics. When I bought it it used to switch to turn of the better graphics card to save power and run on a more power effecient one. When I connected the laptop to a power source again I could go to the intel graphics icon on the task bar and click on "switch to enhanced performance mode" or something similar. But like 2-3 months ago it suddenly vanished. I cannot switch modes anymore, it's gotten stuck in power save mode. I can change the windows power setting but that doesn't enable the better graphics card :( What should I do? I've tried restarting the computer and that does not work. I really hope I don't have to reinstall the drivers! It seems like other people have had the same issue: http://en.community.dell.com/support-forums/laptop/f/3518/p/19422695/19994601.aspx , he hasn't even got the same computer as me. I have windows 7 Home Premium x64 Any ideas?

  Read the article

• How do I setup a Gnome 3.2 VPN connection (Fedora 16)

  - by mpeters

  I just switched to Gnome 3 on a new laptop to try it out. Lots of things are different, but I think I can get used to them. But I'm having a real problem trying to figure out how to get the new network manager to setup a VPN through the GUI. I have openvpn, NetworkManager and NetworkManager-openvpn installed, but when I click on the network icon in gnome-shell there is nothing about vpn connections in there. When I click the "Network Settings" link in that menu I just see menus for Wired, Wireless and Network Proxy and none of those screens has anything for VPN connections either. Any suggestions about where I need to look to setup my connections and how to make it easier connect when I need to?

  Read the article

• Jumbo Frames, ISCSI and ESXi

  - by vlannoob

  I have enabled Jumbo Frames (9000) in ESXi for all my vmNICs, vmKernels, vSwitches, iSCSI Bindings etc - basically anywhere in ESXi where it has an MTU settings I have put 9000 in it. The ports on the switches (Dell PowerConnects) are all set for Jumbo Frames. I have a Dell MD3200i with 2 controllers, each with 4 ports for iSCSI. Each of these ports is set to Jumbo Frames (9000) as well. So now the questions: Do I need to log into each Windows Server VM I am running and delve into the NIC properties and manually set it to Jumbo Frames in the NIC properties in the device Manager as well? Whats the best way of testing that Jumbo Frames are indeed working as intended?

  Read the article

• Installing Java 1.5 on Ubuntu?

  - by StackedCrooked

  I already have Java 1.6, but I need to test something with 1.5. I have downloaded the .bin file from http://java.sun.com/javase/downloads/index_jdk5.jsp using the Sun Download Manager. Now I want to create a deb file from this bin file: $ fakeroot make-jpkg java_ee_sdk-5_01-linux.bin Creating temporary directory: /tmp/make-jpkg.Zpm1Y7LbZ0 Loading plugins: blackdown-j2re.sh blackdown-j2sdk.sh common.sh ibm-j2re.sh ibm-j2sdk.sh j2re.sh j2sdk-doc.sh j2sdk.sh j2se.sh sun-j2re.sh sun-j2sdk-doc.sh sun-j2sdk.sh Detected Debian build architecture: i386 Detected Debian GNU type: i486-linux-gnu No matching plugin was found. Removing temporary directory: done How can I fix the "No matching plugin was found." error? Update I downloaded jdk-1_5_0_22-linux-amd64.bin from the archive page and ran Linux installer. It works fine.

  Read the article

• Windows 8.1 update effectively disabled mobile broadband connection

  - by natarajan

  I have Windows 8.1 on my HP laptop and a Huawei broadband modem which was working fine but since some of the updates of Windows 8.1 it is now not working. I have following issue: Under Device Manager Network Adaptor it shows the Hauwei mobile E303H but when I click on it and go to the Driver tab I can see that no device driver is installed. When I click to update the driver and select the generic mobile broadband adaptor it fails and shows "access denied". How do I go about replacing the driver for this?

  Read the article

• mysql cluster virtual ip

  - by user225995

  I am new in mysql cluster and mysql cluster and versions are not my choice. I setup four machines. Two of them manager , Two of them data cluster (ndb and mysqld). And i integrate with mysql utilities master/slave configuration. Everything working fine. Mysql version 5.6.17, ndb 7.3.5 , servers ubuntu 14.04. There will be no much transactions. The only important thing is HA. Everythings must be double. My problem is virtual ip. Since I have only one farm which have master slave configuration, how can i do it without proxy? If I must use proxy which proxy is better?

  Read the article

• How to find spyware dll launched using svchost.exe

  - by Sheen

  This weekend I found my PC was possibly infected by some virus or spyware. There is one "svchost.exe -k netsvcs" in my task manager, and it is running under my user name, rather than SYSTEM accounts. There is already another same process with same command line options under SYSTEM account. This user account svchost.exe consistently consumes 50% CPU (1 of 2 cores of my CPU). In Process Explorer, I can see it is started by explorer.exe, instead of services.exe. However, I failed to find its real service dll place in registry or disk. Does anyone know how to find this malicious program?

  Read the article

• Inserting static current time in Excel

  - by Mike Cole

  I have a time log spreadsheet. I have a new sheet for each day. In each sheet, I have a transactional record of how my time was spent. When I start or end a task, I usually type in the time ("11:00 AM" for example). Is there a shortcut to inserting the current time into a field? I'm sure it can be done with a macro, but I'm not very knowledgeable about macros. I'd like to simply highlight a field and hit some sort of shortcut key to insert a static value of the current time. Thanks for any help!

  Read the article

• anonymous access to ftpd

  - by gcb

  I need FTP on my local LAN so my scanner can send me scans. I am on Debian sid. I installed ftpd and created the user anonymous. I removed anonymous from /etc/ftpusers When I try to login as anonymous it says: login failed. I can't seem to find any log file. I'm using FTP server (Version 6.4/OpenBSD/Linux-ftpd-0.17) update:I needed that so my printer had one place to store my scanned documents on the LAN. solved that buying a dedicated USB pen drive (thankfully I bought a printer one with plenty of options) but in the past this was a very simple task. Install ftpd, specify the directory for anonymous access, and be done with it. now every ftp daemon has several layers of security and chroot in it's core... this is just crazy when all you need a place for a printer to dump files in a secured network.

  Read the article

• Are VLANs necessary for my environment?

  - by kleefaj

  Greetings. I'm the new network manager for a school. I've inherited an environment made up of several Windows servers, about 100 Windows clients, ten printers, one Cisco router, six Cisco switches, and 1 HP switch. Also, we're using VoIP. There are four floors in our building. The hosts on each floor are assigned to a separate VLAN. An office on the first floor has its own VLAN. All the switches are on their own VLAN. The IP phones are on their own VLAN. And the servers are on their own VLAN. For the number of hosts on the network, are all these VLANs really buying me anything? I'm new to the VLAN concept but it seems overly complicated for this environment. Or it's genius and I just don't get it. Any thoughts? Thanks, Jeff

  Read the article

• Diagnose cause of long running requests in IIS 7.0

  - by Shlomi Fruchter

  We are running an ASP.NET web application on IIS 7.0, Windows Server 2008 R2, with SQL Server 2008 R2 for DB. On weekends, when the traffic is high, the request queue length in the IIS servers increase (up to 800 requests) and then drops, every minute or so. I can see that the servers are handling some requests which, according to the 'Current Requests' view in IIS Manager, are long running (thier Time Elapsed value ranges from 20 to 50 seconds). Those requests are not necessarily heavy queries, actually, I can't understand why they are taking so long. Can it be because the client is closing the connection on his side? Thanks, Shlomi

  Read the article

• How to build a private Wi-Fi Network server with VMware?

  - by Maarten Schermer

  For a school project, we have to build a Private network with VMware vSphere , which we can connect to with a Username and Password. On the network we want to create a folder for each Useraccount. Also we must have add a few groups (Admin,Customer,Manager). We must be able to connect to our network via the school Wi-Fi. We want to build a safe and secure network, with an easy way to access the network. Do you have any tips on how to approach this?

  Read the article

• How do I kill a process that keeps respawning?

  - by terabytest

  I got infected by a virus. It looks like I removed it, but it somehow injected a few more processes (I can see them in the task manager) that respawn when I kill them (somehow). Is there a way to destroy those process to stop them from respawning, or in the case something else is respawning them, to kill that "something"? I really don't want to format my pc for this. The data in it is very important for me (personal value) so I'd really want to know a way to do this without reinstalling my OS. I'm on Windows Vista 32 bits.

  Read the article

• LAN cable not connected, but it is

  - by Koen

  I have a Windows XP SP2 desktop PC. It connects to the internet with a LAN cable (there's a wireless router for my laptop in between). The problem should be software because: when i tried connecting the same LAN cable to my laptop it works when i plugin the LAN cable (onboard) the green light is on and the orange light flickers when i tried the other cable (that feeds the wireless router) i have the same problem it worked a few days ago, nothing specific changed I tried removing the ethernet card from the device manager, and windows automatically reinstalled it. What could cause this? What can I try?

  Read the article

• How to enable directory browsiing in IIS7?

  - by frankadelic

  How I enable directory browsing in IIS7? MS technet says this can be done in the IIS console: Open IIS Manager and navigate to the level you want to manage. In Features View, double-click Directory Browsing. In the Actions pane, click Enable if the Directory Browsing feature is disabled and you want to enable it. Or, click Disable if the Directory Browsing feature is enabled and you want to disable it. http://technet.microsoft.com/en-us/library/cc731109%28WS.10%29.aspx However, my IIS console doesn't have the Directory Browsing option mentioned in Step 2. How can this option be made available. Note, this is for a static HTML site, so I don't have any web.config or ASPX files.

  Read the article

• Windows 8 will only recognize the Blu-Ray drive, if the Windows 8 disc is present at boot time

  - by aceinthehole

  If I have the install disc in the Blu-Ray ROM drive at boot time and subsequently remove the disc and replace it with Blu-Ray media, everything functions as I’d expect. However, if I have no media present, or another disc in the drive at boot time, then Windows 8 does not seem to recognize that the Blu-Ray player is even present in the computer. It is not present in My Computer, the Device Manager does not show the player, and scanning for new hardware yields nothing. It seems that the driver is installed and working as expected, but what is it about having the Windows 8 install disc in the drive or not that would cause this kind of behavior?

  Read the article

• Sporadic unspecific kernel panic

  - by koma

  I'm experiencing seldom (so far about once a month) hard crashes on our ubuntu server 10.04 LTS box. The box itself is quite old (Dell PowerEdge 750 from 2004, Pentium4 2.8 GHz). I set up netconsole after it crashed twice last thursday and was able to extract the following output: [ 9354.062473] invalid opcode: 0000 [#1] SMP [ 9354.062516] last sysfs file: /sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/uevent [ 9354.062555] Modules linked in: ppdev adm1026 hwmon_vid i2c_i801 bridge stp dcdbas psmouse serio_raw netconsole configfs shpchp lp parport usbhid hid e1000 [ 9354.062685] [ 9354.062704] Pid: 3988, comm: rsync Not tainted 2.6.38-12-generic-pae #51~lucid1-Ubuntu Dell Computer Corporation PowerEdge 750 /0R1479 [ 9354.062773] EIP: 0060:[<c104fef1>] EFLAGS: 00010046 CPU: 1 [ 9354.062802] EIP is at check_preempt_wakeup+0x181/0x250 [ 9354.062826] EAX: 00000002 EBX: f2a10ccc ECX: 00000000 EDX: 00000002 [ 9354.062850] ESI: f1db71cc EDI: f1db71a0 EBP: f1dbdea8 ESP: f1dbde8c [ 9354.062875] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 9354.062900] Process rsync (pid: 3988, ti=f1dbc000 task=f1db71a0 task.ti=f1dbc000) [ 9354.062933] Stack: [ 9354.062951] 0053ea60 f7907680 f28da840 f2a10ca0 c153ea60 f7907680 c153ea60 f1dbdebc [ 9354.063019] c103f98a f2a10ca0 f7907680 00000001 f1dbdef8 c104f97f 00000000 f2f0bacc [ 9354.063088] f7904338 00000001 00000003 00000000 f2f0bacc 00000001 00000001 00000086 [ 9354.063157] Call Trace: [ 9354.063183] [<c103f98a>] check_preempt_curr+0x6a/0x80 [ 9354.063210] [<c104f97f>] try_to_wake_up+0x5f/0x3f0 [ 9354.063236] [<c1077a00>] ? hrtimer_wakeup+0x0/0x30 [ 9354.063261] [<c104fd64>] wake_up_process+0x14/0x20 [ 9354.063286] [<c1077a1d>] hrtimer_wakeup+0x1d/0x30 [ 9354.063310] [<c1077f4a>] __run_hrtimer+0x7a/0x1c0 [ 9354.063336] [<c107dbad>] ? ktime_get+0x6d/0x110 [ 9354.063360] [<c1078310>] hrtimer_interrupt+0x120/0x2b0 [ 9354.063390] [<c1535c36>] smp_apic_timer_interrupt+0x56/0x8a [ 9354.063418] [<c152f459>] apic_timer_interrupt+0x31/0x38 [ 9354.063446] [<c1520000>] ? mca_attach_bus+0x5/0xc0 [ 9354.063469] Code: 8b 9b 20 01 00 00 8b 86 24 01 00 00 3b 83 24 01 00 00 75 e6 85 db 0f 84 a3 00 00 00 89 da 89 f0 e8 75 f6 fe ff 83 f8 01 0f 85 00 <fe> ff ff 89 f8 e8 95 f9 fe ff 8b 5e 1c 85 db 0f 84 e4 fe ff ff [ 9354.063804] EIP: [<c104fef1>] check_preempt_wakeup+0x181/0x250 SS:ESP 0068:f1dbde8c [ 9354.064231] ---[ end trace 290689cea65aea7f ]--- [ 9354.064290] Kernel panic - not syncing: Fatal exception in interrupt [ 9354.064352] Pid: 3988, comm: rsync Tainted: G D 2.6.38-12-generic-pae #51~lucid1-Ubuntu [ 9354.064424] Call Trace: [ 9354.064481] [<c152c057>] ? panic+0x5c/0x15b [ 9354.064539] [<c15302bd>] ? oops_end+0xcd/0xd0 [ 9354.064539] [<c100d9e4>] ? die+0x54/0x80 [ 9354.064539] [<c152f926>] ? do_trap+0x96/0xc0 [ 9354.064539] [<c100ba00>] ? do_invalid_op+0x0/0xa0 [ 9354.064539] [<c100ba8b>] ? do_invalid_op+0x8b/0xa0 [ 9354.064539] [<c104fef1>] ? check_preempt_wakeup+0x181/0x250 [ 9354.064539] [<c144884d>] ? __kfree_skb+0x3d/0x90 [ 9354.064539] [<c1042ae7>] ? update_curr+0x247/0x2a0 [ 9354.064539] [<c10447bb>] ? update_cfs_load+0x11b/0x2d0 [ 9354.064539] [<c1042a25>] ? update_curr+0x185/0x2a0 [ 9354.064539] [<c152f6bf>] ? error_code+0x67/0x6c [ 9354.064539] [<c104fef1>] ? check_preempt_wakeup+0x181/0x250 [ 9354.064539] [<c103f98a>] ? check_preempt_curr+0x6a/0x80 [ 9354.064539] [<c104f97f>] ? try_to_wake_up+0x5f/0x3f0 [ 9354.064539] [<c1077a00>] ? hrtimer_wakeup+0x0/0x30 [ 9354.064539] [<c104fd64>] ? wake_up_process+0x14/0x20 [ 9354.064539] [<c1077a1d>] ? hrtimer_wakeup+0x1d/0x30 [ 9354.064539] [<c1077f4a>] ? __run_hrtimer+0x7a/0x1c0 [ 9354.064539] [<c107dbad>] ? ktime_get+0x6d/0x110 [ 9354.064539] [<c1078310>] ? hrtimer_interrupt+0x120/0x2b0 [ 9354.064539] [<c1535c36>] ? smp_apic_timer_interrupt+0x56/0x8a [ 9354.064539] [<c152f459>] ? apic_timer_interrupt+0x31/0x38 [ 9354.064539] [<c1520000>] ? mca_attach_bus+0x5/0xc0 Googling for this issue didn't really turn up anything useful (most stuff I found was related to btrfs, but I don't use that, although the module exists and is sometimes loaded). From experience it might have to do with relatively heavy I/O, as two of the panics happened during a backup procedure. Kernel is 2.6.38-12-generic-pae, but I'm pretty sure I also saw panics on 2.6.32. I meanwhile upgraded to 3.0.0-17-generic-pae and am waiting for the next crash ;-) I'm at a loss here, so any pointers where to look for the cause or what it could be would be great :-) Thanks !

  Read the article

• mongod fork vs nohup

  - by Daniel Kitachewsky

  I'm currently writing process management software. One package we use is mongo. Is there any difference between launching mongo with mongod --fork --logpath=/my/path/mongo.log and nohup mongod >> /my/path/mongo.log 2>&1 < /dev/null & ? My first thought was that --fork could spawn more processes and/or threads, and I was suggested that --fork could be useful for changing the effective user (downgrading privileges). But we run all under the same user (process manager and mongod), so is there any other difference? Thank you

  Read the article

• Windows XP, USB-Stick and multiple Partitions

  - by Bobby

  Hello. I've got an USB-Stick with multiple Partitions on it (FAT32 (active), FAT32, Ext2 <-- that's another story) and it seems like that my Windows XP can only mount the first partition of the stick. If I try to mount the second one using the volume manager it tells me that I need to make it active and reboot...is it really that limited or am I just missing something here? Partitions: FAT32, System Rescue CD, bootable and active FAT32, some tools ext2, some data (I know that I need extra drivers etc., but that's not asked here. Edit (Solution): Thanks to the answer with the RMB (ReMoveable Bit) I was able to dig up a solution described at this site (Section: On flash drive only the first partition works). Basically, there's an Hitachi Driver available which filters the RMB on Driver-Level, which just needs to be a little modified to function with basically every USB-Stick. All you need to do is adding the "Device Instance ID" to the driver and then use this driver.

  Read the article

• Multithreaded Windows FOR batch command

  - by Axarydax

  Hi, do you know if there is a simple way to run FOR command in batch file on multiple threads? What's the point of having 4 cores if I can't run my tasks in 4 parallel threads? For example, if I am optimizing PNGs with PNGOUT, the command I would use is for %i in (*.png) do pngout "%i" But this is highly paralellizable task in which the sub-tasks do not depend on each other at all. To run this in 4 'queues' I'd write something like for -thread 4 %i in (*.png) do pngout "%i" Do I need to write my own for-like app that would be able to do this or is there available free solution?

  Read the article

• so i installed sql server now how do i connect to it?

  - by letseatlunch

  SO i have a server running windows server 2008 r2 and i just installed Microsoft sql server 2008. I used the manager thing to create the database and the tables, etc and now i want to connect to it via my visual studio which is on a different machine. so how do i do that? do i need to "turn on" the sql server, do i need to do port forwarding? do i have to modify the iis or change those settings? is there a good article someone can me point me to? just to further help you help me, i understand how to connect to a datasource in visual studio my problem is more with the sql server and understanding how to properly set it up once installed. Sorry for the noob question, i got it all installed and i know how to use it once its all going i just don't know the in-between. thanks in advance dave

  Read the article

• bluetooth doesn't recognize mouse (and other devices)... sometimes

  - by Angelo

  I have a problem with bluetooth with Vista, running on my MacBook. It often doesn't recognize my wireless Magic Mouse. And I saw that it even doesn't seem to start as the pictogram in the task-bar isn't there most of the time I run Vista. But I'm only an Apple-nerd, so I don't know to much about this issue on Vista. When reinstalling Boothcamp or other updates, then once in a while bluetooth recognizes my own mouse (and other devices from some neighbours... so that implicates that the problem must be the bluetooth function in the first place, not my mouse.) Is there some update for the bluetooth application? Angelo

  Read the article

• Why isn't this smbmount attempt working?

  - by Max Williams

  I can successfully access one of our local samba shares, which is on a windows pc (called marina) as follows: $ sudo /usr/bin/smbclient \\\\marina\\resource_library <my password> Domain=[MARINA] OS=[Windows 5.1] Server=[Windows 2000 LAN Manager] smb: \> So, that works. I'm now trying to mount the above location (the resource_library folder on marina) to /mnt/resource_library (as a read only folder), but it keeps failing - i've tried a few variations of specifying the location: $ sudo smbmount \\\\marina\\resource_library /mnt/resource_library -o username=max,password=<my password>,r mount error: could not resolve address for marina: No address associated with hostname No ip address specified and hostname not found and $ sudo smbmount //marina/resource_library /mnt/resource_library -o username=max,password=<my password>,r mount error: could not resolve address for marina: No address associated with hostname No ip address specified and hostname not found and both of the above with MARINA instead of marina. It's bound to be some dumb mistake i'm making, can anyone see it? cheers, max

  Read the article

• Add iphones, ipads to existing OpenVPN server

  - by Zoran

  Could someone please provide me with info How to connect iphone and ipad to a existing OpenVPN server based on Ubuntu 8.04? I saw similar posts (such is Simplest VPN setup for iphone on Debian Linux?) but I haven't seen answer which will help me. Most of our client machines (whic are connecting to OpenVPN) are Windows 7 & Vista. Now I have to add several iphone and ipad users. How to accomplish that task? EDIT: One more thing, I can not use GuizmoVPN since that I wil have to jailbreak iphone which is not possoble solution

  Read the article

• How to print lots of Envelopes.

  - by Ian Ringrose

  How to print lots of Envelopes. I wish to print onto lots of envelopes: A few thousand as a one of task (may repeat each year) Good quality colour photo and graphics that has solid colour (plus some black text) Be painless to operate, I don’t wish to have to clear jams often As I need to put the envelopes into batches, I don’t need an input try that will take hundreds of envelopes. I also need to get a new colour printer to print normal A4 paper; this may or may not be the same printer. I live in the UK, if you care. What should I be looking at?

  Read the article

< Previous Page | 386 387 388 389 390 391 392 393 394 395 396 397  | Next Page >