Search Results

Search found 12375 results on 495 pages for 'red black tree'.

Page 391/495 | < Previous Page | 387 388 389 390 391 392 393 394 395 396 397 398  | Next Page >

  • History of Mobile Technology

    - by David Dorf
    Over the last ten years, mobile phones have gone through several incremental technology leaps that have added capabilities that impact the retail industry.  I've listed the six major ones below, along with their long-lasting impact. 1. Location In the US, the FCC required mobile phones to implement E911 (emergency calls) by 2006, requiring the caller to be located to within 300 meters.  Back in 2000, GPS was opened up for civilian use, and by 2004 Qualcomm had figured out how to use GPS in mobile phones.  So mobile operators moved from cell tower triangulation to GPS, principally for E911.  But then lots of other uses became apparent, especially navigation.  The earliest mobile apps from retailers made it easy to find nearby stores, and companies are looking at ways to use WiFi triangulation inside stores. 2. Computer Vision In 1997 Philippe Kahn shared a photo of his newborn using a mobile phone thus launching the popularity of instant visual communications.  Over the years the quality of the cameras got better, reaching the point where barcodes could be read around 2008.  That's when Occipital came on the scene with their Red Laser application, which was eventually acquired by eBay.  This opened up the ability for consumers to easily price compare inside stores.  Other interesting apps included Tesco's Wine Finder and Amazon's Price Checker, both allowing products to be identified by picture. 3. Augmented Reality Once the mobile phone had GPS, a video camera, and compass functionality it was suddenly possible to overlay digital information on the screen in real-time.  Yelp, which was using GPS to find nearby merchants, created a backdoor called Monocle on the iPhone that showed nearby merchants overlayed on the video camera view.  Today AR apps are mostly used by retailers for marketing, like Moosejaw's app that undresses models in their catalog. 4. Geo-Fencing So if we're able to track the location of a mobile phone, why not use that context to offer timely information?  My first experience with geo-fencing came courtesy of North Face, the outdoor enthusiast store. When a mobile phone enters a predetermined area, like near a store, a text message is sent to phone with an offer or useful information.  Of course retailers can geo-fence their competitors as well and find out which customers are aren't so loyal. 5. Digital Wallet Mobile payments leverage different technologies such as NFC, QRCodes, bluetooth, and SMS to facilitate communication between the consumers's phone and the retailer's point-of-sale. The key here is the potential to consolidate loyalty cards, coupons, and bank cards into the mobile phone and enable faster checkout.  Nobody does this better than Starbucks today, but McDonald's and Duncan Donuts aren't far behind.  Google, Isis, Paypal, Square, and MCX are all vying for leadership in this area.  If NFC does finally take off, it will be leveraged by retailers in more places than just the POS. 6. Voice Response Mobile Phones have had the ability to interpret simple voice commands for a while, but Google and Amazon were the first to use voice to allow searches for products.  Allowing searches by text, barcode, and voice makes it easy to comparison shop in the aisles.  Walmart even uses voice to build shopping lists, and if the Siri API is even opened we could see lots more innovation in this area.

    Read the article

  • Getting the number of fragments which passed the depth test

    - by Etan
    In "modern" environments, the "NV Occlusion Query" extension provides a method to get the number of fragments which passed the depth test. However, on the iPad / iPhone using OpenGL ES, the extension is not available. What is the most performant approach to implement a similar behaviour in the fragment shader? Some of my ideas: Render the object completely in white, then count all the colors together using a two-pass shader where first a vertical line is rendered and for each fragment the shader computes the sum over the whole row. Then, a single vertex is rendered whose fragment sums all the partial sums of the first pass. Doesn't seem to be very efficient. Render the object completely in white over a black background. Downsample recursively, abusing the hardware linear interpolation between textures until being at a reasonably small resolution. This leads to fragments which have a greyscale level depending on the number of white pixels where in their corresponding region. Is this even accurate enough? Use mipmaps and simply read the pixel on the 1x1 level. Again the question of accuracy and if it is even possible using non-power-of-two textures. The problem wit these approaches is, that the pipeline gets stalled which results in major performance issues. Therefore, I'm looking for a more performant way to accomplish my goal. Using the EXT_OCCLUSION_QUERY_BOOLEAN extension Apple introduced EXT_OCCLUSION_QUERY_BOOLEAN in iOS 5.0 for iPad 2. "4.1.6 Occlusion Queries Occlusion queries use query objects to track the number of fragments or samples that pass the depth test. An occlusion query can be started and finished by calling BeginQueryEXT and EndQueryEXT, respectively, with a target of ANY_SAMPLES_PASSED_EXT or ANY_SAMPLES_PASSED_CONSERVATIVE_EXT. When an occlusion query is started with the target ANY_SAMPLES_PASSED_EXT, the samples-boolean state maintained by the GL is set to FALSE. While that occlusion query is active, the samples-boolean state is set to TRUE if any fragment or sample passes the depth test. When the occlusion query finishes, the samples-boolean state of FALSE or TRUE is written to the corresponding query object as the query result value, and the query result for that object is marked as available. If the target of the query is ANY_SAMPLES_PASSED_CONSERVATIVE_EXT, an implementation may choose to use a less precise version of the test which can additionally set the samples-boolean state to TRUE in some other implementation dependent cases." The first sentence hints on a behavior which is exactly what I'm looking for: getting the number of pixels which passed the depth test in an asynchronous manner without much performance loss. However, the rest of the document describes only how to get boolean results. Is it possible to exploit this extension to get the pixel count? Does the hardware support it so that there may be hidden API to get access to the pixel count? Other extensions which could be exploitable would be debugging features like the number of times the fragment shader was invoked (PSInvocations in DirectX - not sure if something simila is available in OpenGL ES). However, this would also result in a pipeline stall.

    Read the article

  • SSIS Debugging Tip: Using Data Viewers

    - by Jim Giercyk
    When you have an SSIS package error, it is often very helpful to see the data records that are causing the problem.  After all, if your input has 50,000 records and 1 of them has corrupt data, it can be a chore.  Your execution results will tell you which column contains the bad data, but not which record…..enter the Data Viewer. In this scenario I have created a truncation error.  The input length of [lastname] is 50, but the output table has a length of 15.  When it runs, at least one of the records causes the package to fail.     Now what?  We can tell from our execution results that there is a problem with [lastname], but we have no idea WHICH record?     Let’s identify the row that is actually causing the problem.  First, we grab the oft’ forgotten Row Count shape from our toolbar and connect it to the error output from our input query.  Remember that in order to intercept errors with the error output, you must redirect them.     The Row Count shape requires 1 integer variable.  For our purposes, we will not reference the variable, but it is still required in order for the package to run.  Typically we would use the variable to hold the number of rows in the table and refer back to it later in our process.  We are simply using the Row Count as a “Dead End” for errors.  I called my variable RowCounter.  To create a variable, with no shapes selected, right-click on the background and choose Variable.     Once we have setup the Row Count shape, we can right-click on the red line (error output) from the query, and select Data Viewers.  In the popup, we click the add button and we will see this:     There are other fancier options we can play with, but for now we just want to view the output in a grid.  WE select Grid, then click OK on all of the popup windows to shut them down.  We should now see a grid with a pair of glasses on the error output line.     So, we are ready to catch the error output in a grid and see that is causing the problem!  This time when we run the package, it does not fail because we directed the error to the Row Count.  We also get a popup window showing the error record in a grid.  If there were multiple errors we would see them all.     Indeed, the [lastname] column is longer than 15 characters.  Notice the last column in the grid, [Error Code – Description].  We knew this was a truncation error before we added the grid, but if you have worked with SSIS for any length of time, you know that some errors are much more obscure.  The description column can be very useful under those circumstances! Data viewers can be used any time we want to see the data that is actually in the pipeline;  they stop the package temporarily until we shut them.  Also remember that the Row Count shape can be used as a “Dead End”.  It is useful during development when we want to see the output from a dataflow, but don’t want to update a table or file with the data.  Data viewers are an invaluable tool for both development and debugging.  Just remember to REMOVE THEM before putting your package into production

    Read the article

  • Oracle Fusion Supply Chain Management (SCM) Designs May Improve End User Productivity

    - by Applications User Experience
    By Applications User Experience on March 10, 2011 Michele Molnar, Senior Usability Engineer, Applications User Experience The Challenge: The SCM User Experience team, in close collaboration with product management and strategy, completely redesigned the user experience for Oracle Fusion applications. One of the goals of this redesign was to increase end user productivity by applying design patterns and guidelines and incorporating findings from extensive usability research. But a question remained: How do we know that the Oracle Fusion designs will actually increase end user productivity? The Test: To answer this question, the SCM Usability Engineers compared Oracle Fusion designs to their corresponding existing Oracle applications using the workflow time analysis method. The workflow time analysis method breaks tasks into a sequence of operators. By applying standard time estimates for all of the operators in the task, an estimate of the overall task time can be calculated. The workflow time analysis method has been recently adopted by the Applications User Experience group for use in predicting end user productivity. Using this method, a design can be tested and refined as needed to improve productivity even before the design is coded. For the study, we selected some of our recent designs for Oracle Fusion Product Information Management (PIM). The designs encompassed tasks performed by Product Managers to create, manage, and define products for their organization. (See Figure 1 for an example.) In applying this method, the SCM Usability Engineers collaborated with Product Management to compare the new Oracle Fusion Applications designs against Oracle’s existing applications. Together, we performed the following activities: Identified the five most frequently performed tasks Created detailed task scenarios that provided the context for each task Conducted task walkthroughs Analyzed and documented the steps and flow required to complete each task Applied standard time estimates to the operators in each task to estimate the overall task completion time Figure 1. The interactions on each Oracle Fusion Product Information Management screen were documented, as indicated by the red highlighting. The task scenario and script provided the context for each task.  The Results: The workflow time analysis method predicted that the Oracle Fusion Applications designs would result in productivity gains in each task, ranging from 8% to 62%, with an overall productivity gain of 43%. All other factors being equal, the new designs should enable these tasks to be completed in about half the time it takes with existing Oracle Applications. Further analysis revealed that these performance gains would be achieved by reducing the number of clicks and screens needed to complete the tasks. Conclusions: Using the workflow time analysis method, we can expect the Oracle Fusion Applications redesign to succeed in improving end user productivity. The workflow time analysis method appears to be an effective and efficient tool for testing, refining, and retesting designs to optimize productivity. The workflow time analysis method does not replace usability testing with end users, but it can be used as an early predictor of design productivity even before designs are coded. We are planning to conduct usability tests later in the development cycle to compare actual end user data with the workflow time analysis results. Such results can potentially be used to validate the productivity improvement predictions. Used together, the workflow time analysis method and usability testing will enable us to continue creating, evaluating, and delivering Oracle Fusion designs that exceed the expectations of our end users, both in the quality of the user experience and in productivity. (For more information about studying productivity, refer to the Measuring User Productivity blog.)

    Read the article

  • Single page not appearing in Google Search

    - by Dan
    Description I have a static franchise website which has various sub pages each dedicated to an individual franchisee. For each franchisee the page, the only thing slightly similar between all of them are the page titles, they follow this structure: <title> Welcome to THE_COMPANY - PRODUCT_DESCRIPTION Services, THE_LOCATION </title> THE_COMPANY and PRODUCT_DESCRIPTION are the same across all franchisees, however THE_LOCATION changes depeding on where they are located in the UK. Each franchisee page has the following <meta /> tags: <meta name="DC.creator" content="user"/> <meta name="DC.format" content="text/html"/> <meta name="DC.language" content="en"/> <meta name="DC.date.modified" content="2014-01-23T11:22:31+00:00"/> <meta name="DC.date.created" content="2014-01-23T11:22:09+00:00"/> <meta name="DC.type" content="Page"/> <meta name="DC.distribution" content="Global"/> <meta name="robots" content="ALL"/> <meta name="distribution" content="Global"/> The main content on each franchisee page is completely different. The Problem There is one particular franchisee page, located in Area A.. Which will not appear in Google Search results at all. However every single other franchisee (if you Google Search for "THE_COMPANY, THE_LOCATION" is number 1). And if I do the same search on Bing, Yahoo or DuckDuckGo, the Area A franchisee is the first result on all of them. Has Google for some reason black listed one page on the site? What I Have Tried Ensuring the page is referenced in my sitemap.xml file 'Fetching as Google Bot' the link www.the_company.co.uk/areaa When that came back as OK I would submit to index Resubmitting the sitemap.xml file in Webmaster Tools Linking to the Area A page from another pages content For this I also waited about 3 weeks before checking again to give Google time to re-index Making a change to the page content and waiting another 2 / 3 weeks Removing the page completely and recreating it with an alternative URL The closest thing I have found to this issue is this StackOverflow question but this particular franchisee has existed for almost a year, it used to appear on Google searches however no longer does. I'm guessing the Panda update wasn't too happy with something on the page, but it hasn't effected anything else on the site and I am at a loss for things to try. I would greatly appreciate any information or thoughts as to what could have caused this Thanks. Update In line with Daniel Fukudas answer below, I have followed some of his steps but everything seems to check out alright: HTTP Headers HTTP/1.1 200 OK => Date => Tue, 25 Feb 2014 16:31:29 GMT Server => Zope/(2.12.16, python 2.6.6, linux2) ZServer/1.1 Content-Length => 40078 Expires => Sat, 01 Jan 2000 00:00:00 GMT Content-Type => text/html;charset=utf-8 Content-Language => en Vary => Accept-Encoding Connection => close Robots <meta /> tag: <meta name="robots" content="ALL"/> I have updated this <meta /> tag to read content="INDEX" instead now. robots.txt: User-agent: * Disallow: User-Agent: Googlebot Disallow: /*sendto_form$ Disallow: /*folder_factories$ Using site:THE_COMPANY.co.uk: Searching for 'AREA A site:THE_COMPANY.co.uk' does not return the page, but regardless of that searching just for site:THE_COMPANY.co.uk will not necessarily return every indexed page, or so I understand... Update It appears Google likes to drop pages every now and then from the index, despite my steps above, I left the site alone and the page appeared back in the SERPs by itself.

    Read the article

  • Texture displays on Android emulator but not on device

    - by Rob
    I have written a simple UI which takes an image (256x256) and maps it to a rectangle. This works perfectly on the emulator however on the phone the texture does not show, I see only a white rectangle. This is my code: public void onSurfaceCreated(GL10 gl, EGLConfig config) { byteBuffer = ByteBuffer.allocateDirect(shape.length * 4); byteBuffer.order(ByteOrder.nativeOrder()); vertexBuffer = byteBuffer.asFloatBuffer(); vertexBuffer.put(cardshape); vertexBuffer.position(0); byteBuffer = ByteBuffer.allocateDirect(shape.length * 4); byteBuffer.order(ByteOrder.nativeOrder()); textureBuffer = byteBuffer.asFloatBuffer(); textureBuffer.put(textureshape); textureBuffer.position(0); // Set the background color to black ( rgba ). gl.glClearColor(0.0f, 0.0f, 0.0f, 0.5f); // Enable Smooth Shading, default not really needed. gl.glShadeModel(GL10.GL_SMOOTH); // Depth buffer setup. gl.glClearDepthf(1.0f); // Enables depth testing. gl.glEnable(GL10.GL_DEPTH_TEST); // The type of depth testing to do. gl.glDepthFunc(GL10.GL_LEQUAL); // Really nice perspective calculations. gl.glHint(GL10.GL_PERSPECTIVE_CORRECTION_HINT, GL10.GL_NICEST); gl.glEnable(GL10.GL_TEXTURE_2D); loadGLTexture(gl); } public void onDrawFrame(GL10 gl) { gl.glClear(GL10.GL_COLOR_BUFFER_BIT | GL10.GL_DEPTH_BUFFER_BIT); gl.glDisable(GL10.GL_DEPTH_TEST); gl.glMatrixMode(GL10.GL_PROJECTION); // Select Projection gl.glPushMatrix(); // Push The Matrix gl.glLoadIdentity(); // Reset The Matrix gl.glOrthof(0f, 480f, 0f, 800f, -1f, 1f); gl.glMatrixMode(GL10.GL_MODELVIEW); // Select Modelview Matrix gl.glPushMatrix(); // Push The Matrix gl.glLoadIdentity(); // Reset The Matrix gl.glEnableClientState(GL10.GL_VERTEX_ARRAY); gl.glEnableClientState(GL10.GL_TEXTURE_COORD_ARRAY); gl.glLoadIdentity(); gl.glTranslatef(card.x, card.y, 0.0f); gl.glBindTexture(GL10.GL_TEXTURE_2D, texture[0]); //activates texture to be used now gl.glVertexPointer(2, GL10.GL_FLOAT, 0, vertexBuffer); gl.glTexCoordPointer(2, GL10.GL_FLOAT, 0, textureBuffer); gl.glDrawArrays(GL10.GL_TRIANGLE_STRIP, 0, 4); gl.glDisableClientState(GL10.GL_VERTEX_ARRAY); gl.glDisableClientState(GL10.GL_TEXTURE_COORD_ARRAY); } public void onSurfaceChanged(GL10 gl, int width, int height) { // Sets the current view port to the new size. gl.glViewport(0, 0, width, height); // Select the projection matrix gl.glMatrixMode(GL10.GL_PROJECTION); // Reset the projection matrix gl.glLoadIdentity(); // Calculate the aspect ratio of the window GLU.gluPerspective(gl, 45.0f, (float) width / (float) height, 0.1f, 100.0f); // Select the modelview matrix gl.glMatrixMode(GL10.GL_MODELVIEW); // Reset the modelview matrix gl.glLoadIdentity(); } public int[] texture = new int[1]; public void loadGLTexture(GL10 gl) { // loading texture Bitmap bitmap; bitmap = BitmapFactory.decodeResource(context.getResources(), R.drawable.image); // generate one texture pointer gl.glGenTextures(0, texture, 0); //adds texture id to texture array // ...and bind it to our array gl.glBindTexture(GL10.GL_TEXTURE_2D, texture[0]); //activates texture to be used now // create nearest filtered texture gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_MIN_FILTER, GL10.GL_NEAREST); gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_MAG_FILTER, GL10.GL_LINEAR); // Use Android GLUtils to specify a two-dimensional texture image from our bitmap GLUtils.texImage2D(GL10.GL_TEXTURE_2D, 0, bitmap, 0); // Clean up bitmap.recycle(); } As per many other similar issues and resolutions on the web i have tried setting the minsdkversion is 3, loading the bitmap via an input stream bitmap = BitmapFactory.decodeStream(is), setting BitmapFactory.Options.inScaled to false, putting the images in the nodpi folder and putting them in the raw folder.. all of which didn't help. I'm not really sure what else to try..

    Read the article

  • Octree subdivision problem

    - by ChaosDev
    Im creating octree manually and want function for effectively divide all nodes and their subnodes - For example - I press button and subnodes divided - press again - all subnodes divided again. Must be like - 1 - 8 - 64. The problem is - i dont understand how organize recursive loops for that. OctreeNode in my unoptimized implementation contain pointers to subnodes(childs),parent,extra vector(contains dublicates of child),generation info and lots of information for drawing. class gOctreeNode { //necessary fields gOctreeNode* FrontBottomLeftNode; gOctreeNode* FrontBottomRightNode; gOctreeNode* FrontTopLeftNode; gOctreeNode* FrontTopRightNode; gOctreeNode* BackBottomLeftNode; gOctreeNode* BackBottomRightNode; gOctreeNode* BackTopLeftNode; gOctreeNode* BackTopRightNode; gOctreeNode* mParentNode; std::vector<gOctreeNode*> m_ChildsVector; UINT mGeneration; bool mSplitted; bool isSplitted(){return m_Splitted;} .... //unnecessary fields }; DivideNode of Octree class fill these fields, set mSplitted to true, and prepare for correctly drawing. Octree contains basic nodes(m_nodes). Basic node can be divided, but now I want recursivly divide already divided basic node with 8 subnodes. So I write this function. void DivideAllChildCells(int ix,int ih,int id) { std::vector<gOctreeNode*> nlist; std::vector<gOctreeNode*> dlist; int index = (ix * m_Height * m_Depth) + (ih * m_Depth) + (id * 1);//get index of specified node gOctreeNode* baseNode = m_nodes[index].get(); nlist.push_back(baseNode->FrontTopLeftNode); nlist.push_back(baseNode->FrontTopRightNode); nlist.push_back(baseNode->FrontBottomLeftNode); nlist.push_back(baseNode->FrontBottomRightNode); nlist.push_back(baseNode->BackBottomLeftNode); nlist.push_back(baseNode->BackBottomRightNode); nlist.push_back(baseNode->BackTopLeftNode); nlist.push_back(baseNode->BackTopRightNode); bool cont = true; UINT d = 0;//additional recursive loop param (?) UINT g = 0;//additional recursive loop param (?) LoopNodes(d,g,nlist,dlist); //Divide resulting nodes for(UINT i = 0; i < dlist.size(); i++) { DivideNode(dlist[i]); } } And now, back to the main question,I present LoopNodes, which must do all work for giving dlist nodes for splitting. void LoopNodes(UINT& od,UINT& og,std::vector<gOctreeNode*>& nlist,std::vector<gOctreeNode*>& dnodes) { //od++;//recursion depth bool f = false; //pass through childs for(UINT i = 0; i < 8; i++) { if(nlist[i]->isSplitted())//if node splitted and have childs { //pass forward through tree for(UINT j = 0; j < 8; j++) { nlist[j] = nlist[j]->m_ChildsVector[j];//set pointers to these childs } LoopNodes(od,og,nlist,dnodes); } else //if no childs { //add to split vector dnodes.push_back(nlist[i]); } } } This version of loop nodes works correctly for 2(or 1?) generations after - this will not divide neightbours nodes, only some corners. I need correct algorithm. Screenshot All I need - is correct version of LoopNodes, which can add all nodes for DivideNode.

    Read the article

  • The Future of Air Travel: Intelligence and Automation

    - by BobEvans
    Remember those white-knuckle flights through stormy weather where unexpected plunges in altitude result in near-permanent relocations of major internal organs? Perhaps there’s a better way, according to a recent Wall Street Journal article: “Pilots of a Honeywell International Inc. test plane stayed on their initial flight path, relying on the company's latest onboard radar technology to steer through the worst of the weather. The specially outfitted Boeing 757 barely shuddered as it gingerly skirted some of the most ferocious storm cells over Fort Walton Beach and then climbed above the rest in zero visibility.” Or how about the multifaceted check-in process, which might not wreak havoc on liver location but nevertheless makes you wonder if you’ve been trapped in some sort of covert psychological-stress test? Another WSJ article, called “The Self-Service Airport,” says there’s reason for hope there as well: “Airlines are laying the groundwork for the next big step in the airport experience: a trip from the curb to the plane without interacting with a single airline employee. At the airport of the near future, ‘your first interaction could be with a flight attendant,’ said Ben Minicucci, chief operating officer of Alaska Airlines, a unit of Alaska Air Group Inc.” And in the topsy-turvy world of air travel, it’s not just the passengers who’ve been experiencing bumpy rides: the airlines themselves are grappling with a range of challenges—some beyond their control, some not—that make profitability increasingly elusive in spite of heavy demand for their services. A recent piece in The Economist illustrates one of the mega-challenges confronting the airline industry via a striking set of contrasting and very large numbers: while the airlines pay $7 billion per year to third-party computerized reservation services, the airlines themselves earn a collective profit of only $3 billion per year. In that context, the anecdotes above point unmistakably to the future that airlines must pursue if they hope to be able to manage some of the factors outside of their control (e.g., weather) as well as all of those within their control (operating expenses, end-to-end visibility, safety, load optimization, etc.): more intelligence, more automation, more interconnectedness, and more real-time awareness of every facet of their operations. Those moves will benefit both passengers and the air carriers, says the WSJ piece on The Self-Service Airport: “Airlines say the advanced technology will quicken the airport experience for seasoned travelers—shaving a minute or two from the checked-baggage process alone—while freeing airline employees to focus on fliers with questions. ‘It's more about throughput with the resources you have than getting rid of humans,’ said Andrew O'Connor, director of airport solutions at Geneva-based airline IT provider SITA.” Oracle’s attempting to help airlines gain control over these challenges by blending together a range of its technologies into a solution called the Oracle Airline Data Model, which suggests the following steps: • To retain and grow their customer base, airlines need to focus on the customer experience. • To personalize and differentiate the customer experience, airlines need to effectively manage their passenger data. • The Oracle Airline Data Model can help airlines jump-start their customer-experience initiatives by consolidating passenger data into a customer data hub that drives realtime business intelligence and strategic customer insight. • Oracle’s Airline Data Model brings together multiple types of data that can jumpstart your data-warehousing project with rich out-of-the-box functionality. • Oracle’s Intelligent Warehouse for Airlines brings together the powerful capabilities of Oracle Exadata and the Oracle Airline Data Model to give you real-time strategic insights into passenger demand, revenues, sales channels and your flight network. The airline industry aside, the bullet points above offer a broad strategic outline for just about any industry because the customer experience is becoming pre-eminent in each and there is simply no way to deliver world-class customer experiences unless a company can capture, manage, and analyze all of the relevant data in real-time. I’ll leave you with two thoughts from the WSJ article about the new in-flight radar system from Honeywell: first, studies show that a single episode of serious turbulence can wrack up $150,000 in additional costs for an airline—so, it certainly behooves the carriers to gain the intelligence to avoid turbulence as much as possible. And second, it’s back to that top-priority customer-experience thing and the value that ever-increasing levels of intelligence can deliver. As the article says: “In the cabin, reporters watched screens showing the most intense parts of the nearly 10-mile wide storm, which churned some 7,000 feet below, in vibrant red and other colors. The screens also were filled with tiny symbols depicting likely locations of lightning and hail, which can damage planes and wreak havoc on the nerves of white-knuckle flyers.”  (Bob Evans is senior vice-president, communications, for Oracle.)  

    Read the article

  • Ask the Readers: Would You Be Willing to Give Windows Up and Use a Different O.S.?

    - by Asian Angel
    When it comes to computers, Windows definitely rules the desktop in comparison to other operating systems. What we would like to know this week is if you would actually be willing to give up using Windows altogether and move to a different operating system on your computers. Note: This week’s Ask the Readers post is posing a hypothetical situation, so please refrain from starting arguments or a flame war in the comments. Good reasoned discussion is always welcome. There is no doubt that Windows is the dominant operating system in use today. Everywhere you go or look it is easy to find computers with Windows installed such as at work, home, the library, government offices, and more. For many people it is the operating system that they know and are comfortable with, which makes changing to a different operating system less appealing. Adding to the preference for Windows (or dependency based on your view) is the custom software that many businesses use on a daily basis. Throw in the high volume of people who depend on and use Microsoft Office as a standard for their business documents and it is little wonder that Windows is so dominant. So what would you use if you did decide to take a break from or permanently move away from Windows? If your choice is Linux then you have a large and wonderful variety of distributions to choose from based on what you want out of your system. Want a distribution that is easy to work with? You could choose Ubuntu, Linux Mint, or others that are engineered to be ready to go “out of the box”. Like a challenge? Perhaps Arch Linux is more your style. One of the most attractive features of all about Linux is the price…it is very hard to beat free! Maybe Mac OS X sounds like the perfect choice. It has a certain mystique and elegance associated with it and many OS X fans refuse to use anything else if given a choice. Then there is the soon to be released Chrome OS with its’ emphasis on cloud computing. This is a system that is definitely focused on being as low-maintenance and hassle-free as possible. Quick on, quick off, minimalist, and made to be portable. All of the system’s updates will occur automatically leaving you free to work and play in the cloud. But it does have its’ limitations…no installing all of those custom apps that you love using on Windows or other systems…it is literally all about the browsing window and web apps. So there you have it. If the opportunity presented itself would you, could you give Windows up and use a different operating system? Would it be easy or hard for you to do? Perhaps it would not really matter so long as you could do what you needed or wanted to do on a computer. And maybe this is the perfect time to try something new and find out…that new favorite operating system could be just an install disc away. Let us know your thoughts in the comments! How-To Geek Polls require Javascript. Please Click Here to View the Poll. Latest Features How-To Geek ETC The Complete List of iPad Tips, Tricks, and Tutorials The 50 Best Registry Hacks that Make Windows Better The How-To Geek Holiday Gift Guide (Geeky Stuff We Like) LCD? LED? Plasma? The How-To Geek Guide to HDTV Technology The How-To Geek Guide to Learning Photoshop, Part 8: Filters Improve Digital Photography by Calibrating Your Monitor The Brothers Mario – Epic Gangland Style Mario Brothers Movie Trailer [Video] Score Awesome Games on the Cheap with the Humble Indie Bundle Add a Colorful Christmas Theme to Your Windows 7 Desktop This Windows Hack Changes the Blue Screen of Death to Red Edit Images Quickly in Firefox with Pixlr Grabber Zoho Writer, Sheet, and Show Now Available in Chrome Web Store

    Read the article

  • Getting Wrong Answer in range maximum query [on hold]

    - by user3186829
    I've just learnt range minimum and maximum queries using segment trees.But when I implemented it on my own I'm getting wrong answer.Logically I don't find any mistake in my code but if any one can point it out then I would be really thankful. Code in C++: #include<bits/stdc++.h> using namespace std; #define LL long long #define mp make_pair #define pb push_back #define gc getchar_unlocked #define pc putchar_unlocked #define LD long double #define MAXN 19999999 #define max(a,b) ((a)>(b)?(a):(b)) LL P[MAXN+15]; LL ST[2*MAXN+25]; long N,M,i,A,B,K; void build(long id,long L,long R) { long M=(L+R)>>1L; long LCT=id<<1L; long RCT=LCT+1L; if(L==R) { ST[id]=P[L]; return; } build(LCT,L,M); build(RCT,M+1,R); } //Range Update of segment tree void updateST(long id,long L,long R,long Q1,long Q2,long val) { long M=(L+R)>>1L; long LCT=id<<1L; long RCT=LCT+1L; if(L>Q2||R<Q1) { return; } if(L==Q1&&R==Q2) { ST[id]+=val; return; } if(Q2<=M) { updateST(LCT,L,M,Q1,Q2,val); } else if(Q1>M) { updateST(RCT,M+1,R,Q1,Q2,val); } else { updateST(LCT,L,M,Q1,M,val); updateST(RCT,M+1,R,M+1,Q2,val); } } //Query for finding maximum element in a given range[Q1,Q2] and 1<=Q1,Q2<=N LL query2(long id,long L,long R,long Q1,long Q2) { long M=(L+R)>>1; long LCT=id<<1; long RCT=LCT+1; if(L>Q2||R<Q1) { return 0; } if(L==Q1&&R==Q2) { return ST[id]; } if(Q2<=M) { return query2(LCT,L,M,Q1,Q2); } else if(Q1>M) { return query2(RCT,M+1,R,Q1,Q2); } else { LL G=query2(LCT,L,M,Q1,M); LL H=query2(RCT,M+1,R,M+1,Q2); LL RES=max(G,H); return RES; } } int main() { scanf("%ld %ld",&N,&M); build(1,1,N); for(i=0;i<M;i++) { scanf("%ld %ld %ld",&A,&B,&K); updateST(1,1,N,A,B,K); } //Finding maximum element in range[1,N]] cout<<query2(1,1,N,1,N); return 0; }

    Read the article

  • WebLogic Server Performance and Tuning: Part II - Thread Management

    - by Gokhan Gungor
    WebLogic Server, like any other java application server, provides resources so that your applications use them to provide services. Unfortunately none of these resources are unlimited and they must be managed carefully. One of these resources is threads which are pooled to provide better throughput and performance along with the fast response time and to avoid deadlocks. Threads are execution points that WebLogic Server delivers its power and execute work. Managing threads is very important because it may affect the overall performance of the entire system. In previous releases of WebLogic Server 9.0 we had multiple execute queues and user defined thread pools. There were different queues for different type of work which had fixed number of execute threads.  Tuning of this thread pools and finding the proper number of threads was time consuming which required many trials. WebLogic Server 9.0 and the following releases use a single thread pool and a single priority-based execute queue. All type of work is executed in this single thread pool. Its size (thread count) is automatically decreased or increased (self-tuned). The new “self-tuning” system simplifies getting the proper number of threads and utilizing them.Work manager allows your applications to run concurrently in multiple threads. Work manager is a mechanism that allows you to manage and utilize threads and create rules/guidelines to follow when assigning requests to threads. We can set a scheduling guideline or priority a request with a work manager and then associate this work manager with one or more applications. At run-time, WebLogic Server uses these guidelines to assign pending work/requests to execution threads. The position of a request in the execute queue is determined by its priority. There is a default work manager that is provided. The default work manager should be sufficient for most applications. However there can be cases you want to change this default configuration. Your application(s) may be providing services that need mixture of fast response time and long running processes like batch updates. However wrong configuration of work managers can lead a performance penalty while expecting improvement.We can define/configure work managers at;•    Domain Level: config.xml•    Application Level: weblogic-application.xml •    Component Level: weblogic-ejb-jar.xml or weblogic.xml(For a specific web application use weblogic.xml)We can use the following predefined rules/constraints to manage the work;•    Fair Share Request Class: Specifies the average thread-use time required to process requests. The default is 50.•    Response Time Request Class: Specifies a response time goal in milliseconds.•    Context Request Class: Assigns request classes to requests based on context information.•    Min Threads Constraint: Limits the number of concurrent threads executing requests.•    Max Threads Constraint: Guarantees the number of threads the server will allocate to requests.•    Capacity Constraint: Causes the server to reject requests only when it has reached its capacity. Let’s create a work manager for our application for a long running work.Go to WebLogic console and select Environment | Work Managers from the domain structure tree. Click New button and select Work manager and click next. Enter the name for the work manager and click next. Then select the managed server instances(s) or clusters from available targets (the one that your long running application is deployed) and finish. Click on MyWorkManager, and open the Configuration tab and check Ignore Stuck Threads and save. This will prevent WebLogic to tread long running processes (that is taking more than a specified time) as stuck and enable to finish the process.

    Read the article

  • Normal map lighting bug in bottom right quadrant

    - by Ryan Capote
    I am currently working on getting normal maps working in my project, and have run into a problem with lighting. As you can see, the normals in the bottom right quadrant of the lighting isn't calculating the correct direction to the light or something. Best seen by the red light If I use flat normals (z normal = 1.0), it seems to be working fine: normals for the tile sheet: Shader: #version 330 uniform sampler2D uDiffuseTexture; uniform sampler2D uNormalsTexture; uniform sampler2D uSpecularTexture; uniform sampler2D uEmissiveTexture; uniform sampler2D uWorldNormals; uniform sampler2D uShadowMap; uniform vec4 uLightColor; uniform float uConstAtten; uniform float uLinearAtten; uniform float uQuadradicAtten; uniform float uColorIntensity; in vec2 TexCoords; in vec2 GeomSize; out vec4 FragColor; float sample(vec2 coord, float r) { return step(r, texture2D(uShadowMap, coord).r); } float occluded() { float PI = 3.14; vec2 normalized = TexCoords.st * 2.0 - 1.0; float theta = atan(normalized.y, normalized.x); float r = length(normalized); float coord = (theta + PI) / (2.0 * PI); vec2 tc = vec2(coord, 0.0); float center = sample(tc, r); float sum = 0.0; float blur = (1.0 / GeomSize.x) * smoothstep(0.0, 1.0, r); sum += sample(vec2(tc.x - 4.0*blur, tc.y), r) * 0.05; sum += sample(vec2(tc.x - 3.0*blur, tc.y), r) * 0.09; sum += sample(vec2(tc.x - 2.0*blur, tc.y), r) * 0.12; sum += sample(vec2(tc.x - 1.0*blur, tc.y), r) * 0.15; sum += center * 0.16; sum += sample(vec2(tc.x + 1.0*blur, tc.y), r) * 0.15; sum += sample(vec2(tc.x + 2.0*blur, tc.y), r) * 0.12; sum += sample(vec2(tc.x + 3.0*blur, tc.y), r) * 0.09; sum += sample(vec2(tc.x + 4.0*blur, tc.y), r) * 0.05; return sum * smoothstep(1.0, 0.0, r); } float calcAttenuation(float distance) { float linearAtten = uLinearAtten * distance; float quadAtten = uQuadradicAtten * distance * distance; float attenuation = 1.0 / (uConstAtten + linearAtten + quadAtten); return attenuation; } vec3 calcFragPosition(void) { return vec3(TexCoords*GeomSize, 0.0); } vec3 calcLightPosition(void) { return vec3(GeomSize/2.0, 0.0); } float calcDistance(vec3 fragPos, vec3 lightPos) { return length(fragPos - lightPos); } vec3 calcLightDirection(vec3 fragPos, vec3 lightPos) { return normalize(lightPos - fragPos); } vec4 calcFinalLight(vec2 worldUV, vec3 lightDir, float attenuation) { float diffuseFactor = dot(normalize(texture2D(uNormalsTexture, worldUV).rgb), lightDir); vec4 diffuse = vec4(0.0); vec4 lightColor = uLightColor * uColorIntensity; if(diffuseFactor > 0.0) { diffuse = vec4(texture2D(uDiffuseTexture, worldUV.xy).rgb, 1.0); diffuse *= diffuseFactor; lightColor *= diffuseFactor; } else { discard; } vec4 final = (diffuse + lightColor); if(texture2D(uWorldNormals, worldUV).g > 0.0) { return final * attenuation; } else { return final * occluded(); } } void main(void) { vec3 fragPosition = calcFragPosition(); vec3 lightPosition = calcLightPosition(); float distance = calcDistance(fragPosition, lightPosition); float attenuation = calcAttenuation(distance); vec2 worldPos = gl_FragCoord.xy / vec2(1024, 768); vec3 lightDir = calcLightDirection(fragPosition, lightPosition); lightDir = (lightDir*0.5)+0.5; float atten = calcAttenuation(distance); vec4 emissive = texture2D(uEmissiveTexture, worldPos); FragColor = calcFinalLight(worldPos, lightDir, atten) + emissive; }

    Read the article

  • Incorrect lighting results with deferred rendering

    - by Lasse
    I am trying to render a light-pass to a texture which I will later apply on the scene. But I seem to calculate the light position wrong. I am working on view-space. In the image above, I am outputting the attenuation of a point light which is currently covering the whole screen. The light is at 0,10,0 position, and I transform it to view-space first: Vector4 pos; Vector4 tmp = new Vector4 (light.Position, 1); // Transform light position for shader Vector4.Transform (ref tmp, ref Camera.ViewMatrix, out pos); shader.SendUniform ("LightViewPosition", ref pos); Now to me that does not look as it should. What I think it should look like is that the white area should be on the center of the scene. The camera is at the corner of the scene, and it seems as if the light would move along with the camera. Here's the fragment shader code: void main(){ // default black color vec3 color = vec3(0); // Pixel coordinates on screen without depth vec2 PixelCoordinates = gl_FragCoord.xy / ScreenSize; // Get pixel position using depth from texture vec4 depthtexel = texture( DepthTexture, PixelCoordinates ); float depthSample = unpack_depth(depthtexel); // Get pixel coordinates on camera-space by multiplying the // coordinate on screen-space by inverse projection matrix vec4 world = (ImP * RemapMatrix * vec4(PixelCoordinates, depthSample, 1.0)); // Undo the perspective calculations vec3 pixelPosition = (world.xyz / world.w) * 3; // How far the light should reach from it's point of origin float lightReach = LightColor.a / 2; // Vector in between light and pixel vec3 lightDir = (LightViewPosition.xyz - pixelPosition); float lightDistance = length(lightDir); vec3 lightDirN = normalize(lightDir); // Discard pixels too far from light source //if(lightReach < lightDistance) discard; // Get normal from texture vec3 normal = normalize((texture( NormalTexture, PixelCoordinates ).xyz * 2) - 1); // Half vector between the light direction and eye, used for specular component vec3 halfVector = normalize(lightDirN + normalize(-pixelPosition)); // Dot product of normal and light direction float NdotL = dot(normal, lightDirN); float attenuation = pow(lightReach / lightDistance, LightFalloff); // If pixel is lit by the light if(NdotL > 0) { // I have moved stuff from here to above so I can debug them. // Diffuse light color color += LightColor.rgb * NdotL * attenuation; // Specular light color color += LightColor.xyz * pow(max(dot(halfVector, normal), 0.0), 4.0) * attenuation; } RT0 = vec4(color, 1); //RT0 = vec4(pixelPosition, 1); //RT0 = vec4(depthSample, depthSample, depthSample, 1); //RT0 = vec4(NdotL, NdotL, NdotL, 1); RT0 = vec4(attenuation, attenuation, attenuation, 1); //RT0 = vec4(lightReach, lightReach, lightReach, 1); //RT0 = depthtexel; //RT0 = 100 / vec4(lightDistance, lightDistance, lightDistance, 1); //RT0 = vec4(lightDirN, 1); //RT0 = vec4(halfVector, 1); //RT0 = vec4(LightColor.xyz,1); //RT0 = vec4(LightViewPosition.xyz/100, 1); //RT0 = vec4(LightPosition.xyz, 1); //RT0 = vec4(normal,1); } What am I doing wrong here?

    Read the article

  • Learn Many Languages

    - by Jeff Foster
    My previous blog, Deliberate Practice, discussed the need for developers to “sharpen their pencil” continually, by setting aside time to learn how to tackle problems in different ways. However, the Sapir-Whorf hypothesis, a contested and somewhat-controversial concept from language theory, seems to hold reasonably true when applied to programming languages. It states that: “The structure of a language affects the ways in which its speakers conceptualize their world.” If you’re constrained by a single programming language, the one that dominates your day job, then you only have the tools of that language at your disposal to think about and solve a problem. For example, if you’ve only ever worked with Java, you would never think of passing a function to a method. A good developer needs to learn many languages. You may never deploy them in production, you may never ship code with them, but by learning a new language, you’ll have new ideas that will transfer to your current “day-job” language. With the abundant choices in programming languages, how does one choose which to learn? Alan Perlis sums it up best. “A language that doesn‘t affect the way you think about programming is not worth knowing“ With that in mind, here’s a selection of languages that I think are worth learning and that have certainly changed the way I think about tackling programming problems. Clojure Clojure is a Lisp-based language running on the Java Virtual Machine. The unique property of Lisp is homoiconicity, which means that a Lisp program is a Lisp data structure, and vice-versa. Since we can treat Lisp programs as Lisp data structures, we can write our code generation in the same style as our code. This gives Lisp a uniquely powerful macro system, and makes it ideal for implementing domain specific languages. Clojure also makes software transactional memory a first-class citizen, giving us a new approach to concurrency and dealing with the problems of shared state. Haskell Haskell is a strongly typed, functional programming language. Haskell’s type system is far richer than C# or Java, and allows us to push more of our application logic to compile-time safety. If it compiles, it usually works! Haskell is also a lazy language – we can work with infinite data structures. For example, in a board game we can generate the complete game tree, even if there are billions of possibilities, because the values are computed only as they are needed. Erlang Erlang is a functional language with a strong emphasis on reliability. Erlang’s approach to concurrency uses message passing instead of shared variables, with strong support from both the language itself and the virtual machine. Processes are extremely lightweight, and garbage collection doesn’t require all processes to be paused at the same time, making it feasible for a single program to use millions of processes at once, all without the mental overhead of managing shared state. The Benefits of Multilingualism By studying new languages, even if you won’t ever get the chance to use them in production, you will find yourself open to new ideas and ways of coding in your main language. For example, studying Haskell has taught me that you can do so much more with types and has changed my programming style in C#. A type represents some state a program should have, and a type should not be able to represent an invalid state. I often find myself refactoring methods like this… void SomeMethod(bool doThis, bool doThat) { if (!(doThis ^ doThat)) throw new ArgumentException(“At least one arg should be true”); if (doThis) DoThis(); if (doThat) DoThat(); } …into a type-based solution, like this: enum Action { DoThis, DoThat, Both }; void SomeMethod(Action action) { if (action == Action.DoThis || action == Action.Both) DoThis(); if (action == Action.DoThat || action == Action.Both) DoThat(); } At this point, I’ve removed the runtime exception in favor of a compile-time check. This is a trivial example, but is just one of many ideas that I’ve taken from one language and implemented in another.

    Read the article

  • Java EE 7 Roadmap

    - by Linda DeMichiel
    The Java EE 6 Platform, released in December 2009, has seen great uptake from the community with its POJO-based programming model, lightweight Web Profile, and extension points. There are now 13 Java EE 6 compliant appserver implementations today! When we announced the Java EE 7 JSR back in early 2011, our plans were that we would release it by Q4 2012. This target date was slightly over three years after the release of Java EE 6, but at the same time it meant that we had less than two years to complete a fairly comprehensive agenda — to continue to invest in significant enhancements in simplification, usability, and functionality in updated versions of the JSRs that are currently part of the platform; to introduce new JSRs that reflect emerging needs in the community; and to add support for use in cloud environments. We have since announced a minor adjustment in our dates (to the spring of 2013) in order to accommodate the inclusion of JSRs of importance to the community, such as Web Sockets and JSON-P. At this point, however, we have to make a choice. Despite our best intentions, our progress has been slow on the cloud side of our agenda. Partially this has been due to a lack of maturity in the space for provisioning, multi-tenancy, elasticity, and the deployment of applications in the cloud. And partially it is due to our conservative approach in trying to get things "right" in view of limited industry experience in the cloud area when we started this work. Because of this, we believe that providing solid support for standardized PaaS-based programming and multi-tenancy would delay the release of Java EE 7 until the spring of 2014 — that is, two years from now and over a year behind schedule. In our opinion, that is way too long. We have therefore proposed to the Java EE 7 Expert Group that we adjust our course of action — namely, stick to our current target release dates, and defer the remaining aspects of our agenda for PaaS enablement and multi-tenancy support to Java EE 8. Of course, we continue to believe that Java EE is well-suited for use in the cloud, although such use might not be quite ready for full standardization. Even today, without Java EE 7, Java EE vendors such as Oracle, Red Hat, IBM, and CloudBees have begun to offer the ability to run Java EE applications in the cloud. Deferring the remaining cloud-oriented aspects of our agenda has several important advantages: It allows Java EE Platform vendors to gain more experience with their implementations in this area and thus helps us avoid risks entailed by trying to standardize prematurely in an emerging area. It means that the community won't need to wait longer for those features that are ready at the cost of those features that need more time. Because we have already laid some of the infrastructure for cloud support in Java EE 7, including resource definition metadata, improved security configuration, JPA schema generation, etc., it will allow us to expedite a Java EE 8 release. We therefore plan to target the Java EE 8 Platform release for the spring of 2015. This shift in the scope of Java EE 7 allows us to better retain our focus on enhancements in simplification and usability and to deliver on schedule those features that have been most requested by developers. These include the support for HTML 5 in the form of Web Sockets and JSON-P; the simplified JMS 2.0 APIs; improved Managed Bean alignment, including transactional interceptors; the JAX-RS 2.0 client API; support for method-level validation; a much more comprehensive expression language; and more. We feel strongly that this is the right thing to do, and we hope that you will support us in this proposed direction.

    Read the article

  • Business School graduate joins Oracle

    - by jessica.ebbelaar(at)oracle.com
    My name is Mathias, I work as an Applications Inside Sales Rep for the French market, and I’d like to give you a brief snapshot of my experience at Oracle. First things first, how did you hear about Oracle? Where have you seen the sharp and recognizable red logo? Was it in Charles de Gaulle Airport when your eyes crossed the 20-metre banner with a picture of a strange big machine in the middle? Was it through reading the Forbes 10 top IT companies worldwide ranking? Or is it because IT is your thing and you cannot but know one of the “big four”? Meeting with a Grenoble Alumnus My story is a little different. My plan was to work in sales, in the IT industry. I had heard about Oracle, but my opinion at the time was that this kind of multinational company was way out of reach for a young graduate, even with high enthusiasm and great excitement to be (finally) on the job market. So, I was really surprised when I had an interesting conversation with a top alumnus of my business school. We were at the Grenoble Ecole de Management graduation ceremony (our graduation!), and before the party got really started, I got to chat with her. She told me of the great experience she was getting by living and working in Dublin. She had already figured it all out: “you work with another 100 young people from 10 different nationalities across Europe, you can be based in Dublin, but then once you work really hard you can move to Malaga Spain or other BUs around the world, you can work with different lines of business and learn about new “techy” and business oriented products, move to the field in your home country or elsewhere, etc.” What, what, what? Moving around Europe, trained by the best sales coaches in the world, acquiring strong IT knowledge and getting on board with one of fastest-growing and most watched companies in the world? Well, I was in. The next day (OK, 3 days after, the time to recover), I sent her my CV, and 3 months later I started as a Business Development Consultant at Oracle in Dublin, representing the latest cloud based CRM across the French market. That was 15 months ago. Since then, I moved line of business twice, I’m always learning new things and working with different and senior stakeholders; I have attended hundreds of hours of sales and product training (priceless when you come from a business background); I passed the Dublin Institute of Technology Sales Certification through different trainings given onsite within Oracle; I’ve led projects based around social media and I’ve gotten involved within various sales deals going on my market. Despite all of these great things, two will remain in my spirit: the multiculturalism that I experience every day in the office, and the American style of management - more direct and open than what you can find in “regular French companies”. Sales Progression Board In May 2012, I passed what we call a ‘Sales Progression Board’ to be promoted to an Inside Sales position. I am now in charge of generating revenue through the sale of Oracle applications on my specific territory. Always keeping in my mind my personal ambition: going to the field one day. Interested to join Oracle in the same role as Mathias? Visit http://campus.oracle.com.

    Read the article

  • Recieving and organizing results without server side script (JavaScript)

    - by Aaron
    I have been working on a very large form project for the past few days. I finally managed to get tables to work properly within a javascript file that opens a new display window. Now the issue at hand is that I can't seem to get CSS code to work within the javascript that I have created. Before everyone starts thinking "just use server side script idiot" I have a few conditions and info about the file: The file is only being ran local due to confidential information risks. Once again no option for server access. The intranet the computers are on are already top security and this wouldn't exactly be a company wide program The code below is obviously just a demo with a simple form... The real file has six pages of highly confidential information Only certain fields on this form will actually be gathered (example: address doesnt appear in the results) The display page will contain data compiled into tables for easier viewing I need to be able to create css commands to easily detect certain information if it applies and along with matching design of the original form Here is the code: <html> <head> <title>Form Example</title> <script LANGUAGE="JavaScript" type="text/javascript"> function display() { DispWin = window.open('','NewWin', 'toolbar=no,status=no,width=800,height=600') message = "<body>"; message += "<table border=1 width=100%>"; message += "<tr>"; message += "<th colspan=2 align=center><font face=stencil color=black><h1>Results</h1><h4>one</h4></font>"; message += "</th>"; message += "</tr>"; message += "<td width=50% align=left>"; message += "<ul><li><b><font face=calibri color=red>NAME:</font></b> " + document.form1.yourname.value + "</UL>" message += "</td>"; message += "<td width=50% align=left>"; message += "<li><b>PHONE: </b>" + document.form1.phone.value + "</ul>"; message += "</td>"; message += "</table>"; message += "<body>"; DispWin.document.write(message); DispWin.document.body.style.cssText = 'color:#blue;'; } </script> </head> <body> <h1>Form Example</h1> Enter the following information: <form name="form1"> <p><b>Name:</b> <input TYPE="TEXT" SIZE="20" NAME="yourname"> </p> <p><b>Address:</b> <input TYPE="TEXT" SIZE="30" NAME="address"> </p> <p><b>Phone: </b> <input TYPE="TEXT" SIZE="15" NAME="phone"> </p> <p><input TYPE="BUTTON" VALUE="Display" onClick="display();"></p> </form> </body> </html> >

    Read the article

  • Why won't my Broadcom BCM4312 LP-PHY work with the STA driver?

    - by Jackson Taylor
    I tried the steps here for a 4312: https://help.ubuntu.com/community/WifiDocs/Driver/bcm43xx Both of these: sudo modprobe -r b43 ssb wl sudo modprobe wl return: FATAL: Module wl not found. FATAL: Error running install command for wl (this one is only for the second one actually) I tried the broadcom-sta, didn't work. What's confusing is down below in the next steps for STA with internet access it says to use the bcmwl one. So I install that and it succeeds but with some errors: sudo apt-get install bcmwl-kernel-source Reading package lists... Done Building dependency tree Reading state information... Done The following package was automatically installed and is no longer required: module-assistant Use 'apt-get autoremove' to remove it. The following NEW packages will be installed: bcmwl-kernel-source 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 0 B/1,181 kB of archives. After this operation, 3,609 kB of additional disk space will be used. Selecting previously unselected package bcmwl-kernel-source. (Reading database ... 168005 files and directories currently installed.) Unpacking bcmwl-kernel-source (from .../bcmwl-kernel-source_5.100.82.112+bdcom-0ubuntu3_amd64.deb) ... Setting up bcmwl-kernel-source (5.100.82.112+bdcom-0ubuntu3) ... Loading new bcmwl-5.100.82.112+bdcom DKMS files... Building only for 3.5.0-21-generic Building for architecture x86_64 Module build for the currently running kernel was skipped since the kernel source for this kernel does not seem to be installed. ERROR: Module b43 does not exist in /proc/modules ERROR: Module b43legacy does not exist in /proc/modules ERROR: Module ssb does not exist in /proc/modules ERROR: Module bcm43xx does not exist in /proc/modules ERROR: Module brcm80211 does not exist in /proc/modules ERROR: Module brcmfmac does not exist in /proc/modules ERROR: Module brcmsmac does not exist in /proc/modules ERROR: Module bcma does not exist in /proc/modules FATAL: Module wl not found. FATAL: Error running install command for wl update-initramfs: deferring update (trigger activated) Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-3.5.0-21-generic jtaylor991@jtaylor991-whiteHP:~$ sudo modprobe wl FATAL: Module wl not found. FATAL: Error running install command for wl Then I do the modprobe wl commands listed above and it gives the above listed errors. It didn't work with the broadcom-sta driver either. I installed the b43 ones but nothing happened, and I don't know why so those are still installed. firmware-b43legacy-installer, b43-fwcutter and firmware-b43-lpphy-installer (yes it is a LP-PHY) are currently installed. If I go into System Settings Software Sources Additional Drivers it says "Using Broadcom 802.11 Linux STA wireless driver source from bcmwl-kernel-source (proprietary) But bcmwl-kernel-source isn't installed. I could try again but I remember rebooting and it still said this. What's funny is it found wireless networks during the Ubuntu setup/installation, I don't remember if I got it to connect or not though. I think it kept asking for a password when I put it in (yes it was right I showed password and looked at it) so I just ignored it. But right now the Enable Wireless option in the top right is just gone, it's just Enable Networking and I'm on ethernet on this HP Pavilion dv4-1435dx right here. If I run rfkill list it shows: 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no It was hard blocked at the beginning but unblocking it makes no change. Also it's a touch sensitive button, and it appears to be always orange no matter if it's enabled or not because when I touch it the hard blocked changes between yes and no in rfkill list. I think it was blue for a minute at one point. What is going on?!?! Help me! Lol, thanks for any and all of your time guys. Oh yeah this is Ubuntu 12.10 fresh install.

    Read the article

  • Comparing Apples and Pairs

    - by Tony Davis
    A recent study, High Costs and Negative Value of Pair Programming, by Capers Jones, pulls no punches in its assessment of the costs-to- benefits ratio of pair programming, two programmers working together, at a single computer, rather than separately. He implies that pair programming is a method rushed into production on a wave of enthusiasm for Agile or Extreme Programming, without any real regard for its effectiveness. Despite admitting that his data represented a far from complete study of the economics of pair programming, his conclusions were stark: it was 2.5 times more expensive, resulted in a 15% drop in productivity, and offered no significant quality benefits. The author provides a more scientific analysis than Jon Evans’ Pair Programming Considered Harmful, but the theme is the same. In terms of upfront-coding costs, pair programming is surely more expensive. The claim of productivity loss is dubious and contested by other studies. The third claim, though, did surprise me. The author’s data suggests that if both the pair and the individual programmers employ static code analysis and testing, then there is no measurable difference in the resulting code quality, in terms of defects per function point. In other words, pair programming incurs a massive extra cost for no tangible return in investment. There were, inevitably, many criticisms of his data and his conclusions, a few of which are persuasive. Firstly, that the driver/observer model of pair programming, on which the study bases its findings, is far from the most effective. For example, many find Ping-Pong pairing, based on use of test-driven development, far more productive. Secondly, that it doesn’t distinguish between “expert” and “novice” pair programmers– that is, independently of other programming skills, how skilled was an individual at pair programming. Thirdly, that his measure of quality is too narrow. This point rings true, certainly at Red Gate, where developers don’t pair program all the time, but use the method in short bursts, while tackling a tricky problem and needing a fresh perspective on the best approach, or more in-depth knowledge in a particular domain. All of them argue that pair programming, and collective code ownership, offers significant rewards, if not in terms of immediate “bug reduction”, then in removing the likelihood of single points of failure, and improving the overall quality and longer-term adaptability/maintainability of the design. There is also a massive learning benefit for both participants. One developer told me how he once worked in the same team over consecutive summers, the first time with no pair programming and the second time pair-programming two-thirds of the time, and described the increased rate of learning the second time as “phenomenal”. There are a great many theories on how we should develop software (Scrum, XP, Lean, etc.), but woefully little scientific research in their effectiveness. For a group that spends so much time crunching other people’s data, I wonder if developers spend enough time crunching data about themselves. Capers Jones’ data may be incomplete, but should cause a pause for thought, especially for any large IT departments, supporting commerce and industry, who are considering pair programming. It certainly shouldn’t discourage teams from exploring new ways of developing software, as long as they also think about how to gather hard data to gauge their effectiveness.

    Read the article

  • Three Buckets of Knowledge

    - by BuckWoody
    As I learn more and more about SQL Server every day, I divide up my information into three “buckets”: Concepts In the first bucket are the general concepts about the topic. What is it? What does it do (or sometimes, what is is supposed to do?) How does one operation flow to another? For this information I use books, magazine articles and believe it or not – Wikipedia. I don’t always trust that last source, but I do use it to see how others lay out their thoughts around a concept. I really like graphical charts that show me the process flow if I can get it, and this is an ideal place for a good presentation. In fact, this may be the only real use for a presentation – I’ll explain what I mean in a moment. Reference The references for a topic include things like Transact-SQL (T-SQL) syntax, or the screen layout on a panel, things like that. Think Dictionary. The only reference I trust for this information is Books Online – presentations are fine, but we’re talking about a dictionary. Ever go to a movie that just reads through a dictionary? Me neither. But I have gone to presentations where people try to include tons of reference materials in their slides. Even if you give me the presentation material later, it’s not really a searchable, readable medium. How To A how-to for me is an example, or even better, a tutorial about an example. Whatever it is shows me a practical use for the concepts and of course involves the syntax. The important thing here is that you need to be able to separate out the example the person is showing you from the stuff you need to know. I can’t tell you how many times folks have told me, “well, sure, if yours is red then that works. But mine is blue.” And I have to explain, “then use “blue” for the search word here.” You get the idea. No one will do your work for you – the examples are meant as a teaching tool only. I accept that, learn what I can, and then run off to create my own thing. You might think a How To works well in a presentation, and it does, for the most part. For a complex example or tutorial, I still prefer the printed word (electronic if possible) so that I can go over the example multiple times, skip around and so on.   The order here isn’t actually that important. Most of the time I start with a concept, look at an example, and then read the reference material. But sometimes I look up an example, read a little of concepts and then check the reference. The only primary thing I try to enforce is to read something from each of them. It’s dangerous to base your work on any single example, reference or concept.  Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • Artec TV18R Tuner not working :(

    - by Antillar Maximus
    Can somebody kindly help me setup my TV Tuner stick? Make and Model: Artec TV18R USB TV Tuner OS: Ubuntu 11.10 64bit Hardware: MSI MS1656-US (GX640 barebones): i5 580M, 2xIntel X25M SSDs, Radeon HD5850M,Realtek sound. Logs and messages: antillar@antillar-MS-1656:/usr/share/dvb/atsc$ [B][COLOR=Red]sudo lsusb[/COLOR][/B] Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 003: ID ffc0:001f Bus 002 Device 005: ID 05d8:8117 Ultima Electronics Corp. [/code][code]antillar@antillar-MS-1656:/usr/share/dvb/atsc$ So, it seems that the tuner is being detected, but the light on it does not turn on? Not sure what is going on? sudo lspci [sudo] password for antillar: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) 00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 05) 00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 05) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) 01:00.0 VGA compatible controller: ATI Technologies Inc Broadway PRO [Mobility Radeon HD 5800 Series] 01:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 04:00.0 FireWire (IEEE 1394): JMicron Technology Corp. IEEE 1394 Host Controller 04:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller 04:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller 04:00.3 System peripheral: JMicron Technology Corp. MS Host Controller 04:00.4 System peripheral: JMicron Technology Corp. xD Host Controller 05:00.0 Network controller: Intel Corporation Ultimate N WiFi Link 5300 ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) antillar@antillar-MS-1656:/usr/share/dvb/atsc$ I have been searching for a solution to this all weekend without any luck. I remember reading that ehci_hcd is the problem, but I'm not sure if disabling it is a good idea. I don't want my USB ports to go back to v1.1. Thank you!

    Read the article

  • Cant finish upgrade from 11.10 to 12 on VPS based on Parallels Virtuozzo Containers, due to libc6

    - by Carmageddon
    I was stuck with this problem near the end of an upgrade: WARNING: this version of the GNU libc requires kernel version 2.6.24 or later. Please upgrade your kernel before installing glibc. The installation of a 2.6 kernel could ask you to install a new libc first, this is NOT a bug, and should NOT be reported. In that case, please add lenny sources to your /etc/apt/sources.list and run: apt-get install -t lenny linux-image-2.6 Their suggested stepds dont work on VPS, and after googling, I came up to this: Why did my upgrade to 12.04 fail with "glibc not found" or "libc6" or "requires kernel 2.6.24" error? There is comment by izx which explains my problem and proposes a workaround (might take a while to convince the guys to upgrade the kernel..). However, when I follow his instructions, I get error: # apt-get -f install Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: libc-dev-bin libc6 libc6-dev libnih1 Suggested packages: glibc-doc The following packages will be upgraded: libc-dev-bin libc6 libc6-dev libnih1 4 upgraded, 0 newly installed, 0 to remove and 394 not upgraded. 1 not fully installed or removed. Need to get 0 B/7737 kB of archives. After this operation, 233 kB disk space will be freed. Do you want to continue [Y/n]? y locale: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.15' not found (required by locale) locale: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.14' not found (required by locale) Preconfiguring packages ... (Reading database ... 35175 files and directories currently installed.) Preparing to replace libc6-dev 2.13-20ubuntu5.2 (using .../libc6-dev_2.15-0ubuntu10.3_amd64.deb) ... Unpacking replacement libc6-dev ... Preparing to replace libc-dev-bin 2.13-20ubuntu5.2 (using .../libc-dev-bin_2.15-0ubuntu10.3_amd64.deb) ... Unpacking replacement libc-dev-bin ... Preparing to replace libc6 2.13-20ubuntu5.2 (using .../libc6_2.15-0ubuntu10.3_amd64.deb) ... locale: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.15' not found (required by locale) locale: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.14' not found (required by locale) Checking for services that may need to be restarted... Checking init scripts... runlevel:/var/run/utmp: No such file or directory Checking for services that may need to be restarted... Checking init scripts... runlevel:/var/run/utmp: No such file or directory WARNING: init script for samba not found. Stopping some services possibly affected by the upgrade (will be restarted later): cron: stopping...done. WARNING: this version of the GNU libc requires kernel version 2.6.24 or later. Please upgrade your kernel before installing glibc. The installation of a 2.6 kernel _could_ ask you to install a new libc first, this is NOT a bug, and should *NOT* be reported. In that case, please add lenny sources to your /etc/apt/sources.list and run: apt-get install -t lenny linux-image-2.6 Then reboot into this new kernel, and proceed with your upgrade dpkg: error processing /var/cache/apt/archives/libc6_2.15-0ubuntu10.3_amd64.deb (--unpack): subprocess new pre-installation script returned error exit status 1 Processing triggers for man-db ... locale: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.15' not found (required by locale) locale: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.14' not found (required by locale) Errors were encountered while processing: /var/cache/apt/archives/libc6_2.15-0ubuntu10.3_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1) I also attempted to manually grab the .deb package and install it using dpkg -i, but getting: locale: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.15' not found (required by locale) Even though the file is: libc-bin_2.15-0ubuntu10+openvz0_amd64.deb

    Read the article

  • Issue with DFS imlemtation in objetive-c

    - by Hemant
    i am trying to to do something like this Below is my code: -(id) init{ if( (self=[super init]) ) { bubbles_Arr = [[NSMutableArray alloc] initWithCapacity: 9]; [bubbles_Arr insertObject:[NSMutableArray arrayWithObjects:@"1",@"1",@"1",@"1",@"1",nil] atIndex:0]; [bubbles_Arr insertObject:[NSMutableArray arrayWithObjects:@"3",@"3",@"5",@"5",@"1",nil] atIndex:1]; [bubbles_Arr insertObject:[NSMutableArray arrayWithObjects:@"5",@"3",@"5",@"3",@"1",nil] atIndex:2]; [bubbles_Arr insertObject:[NSMutableArray arrayWithObjects:@"5",@"3",@"5",@"3",@"1",nil] atIndex:3]; [bubbles_Arr insertObject:[NSMutableArray arrayWithObjects:@"1",@"1",@"1",@"1",@"1",nil] atIndex:4]; [bubbles_Arr insertObject:[NSMutableArray arrayWithObjects:@"5",@"5",@"3",@"5",@"1",nil] atIndex:5]; [bubbles_Arr insertObject:[NSMutableArray arrayWithObjects:@"5",@"5",@"5",@"5",@"5",nil] atIndex:6]; [bubbles_Arr insertObject:[NSMutableArray arrayWithObjects:@"5",@"5",@"5",@"5",@"5",nil] atIndex:7]; [bubbles_Arr insertObject:[NSMutableArray arrayWithObjects:@"5",@"5",@"5",@"5",@"5",nil] atIndex:8]; NOCOLOR = @"-1"; R = 9; C = 5; [NSTimer scheduledTimerWithTimeInterval:1.0 target:self selector:@selector(testting) userInfo:Nil repeats:NO]; } return self; } -(void)testting{ // NSLog(@"dataArray---- %@",dataArray.description); int startR = 0; int startC = 0; int color = 1 ;// red // NSString *color = @"5"; //reset visited matrix to false. for(int i = 0; i < R; i++) for(int j = 0; j < C; j++) visited[i][j] = FALSE; //reset count count = 0; [self dfs:startR :startC :color :false]; NSLog(@"count--- %d",count); NSLog(@"test--- %@",bubbles_Arr); } -(void)dfs:(int)ro:(int)co:(int)colori:(BOOL)set{ for(int dr = -1; dr <= 1; dr++) for(int dc = -1; dc <= 1; dc++) if((dr == 0 ^ dc == 0) && [self ok:ro+dr :co+dc]) // 4 neighbors { int nr = ro+dr; int nc = co+dc; NSLog(@"-- %d ---- %d",[[[bubbles_Arr objectAtIndex:nr] objectAtIndex:nc] integerValue],colori); if ((([[[bubbles_Arr objectAtIndex:nr] objectAtIndex:nc] integerValue]==1 || [[[bubbles_Arr objectAtIndex:nr] objectAtIndex:nc] isEqualToString:@"1"]) && !visited[nr][nc])) { visited[nr][nc] = true; count++; [self dfs:nr :nc :colori :set]; if(count>2) { [[bubbles_Arr objectAtIndex:nr] replaceObjectAtIndex:nc withObject:NOCOLOR]; [bubbles[nc+1][nr+1] setTexture:[[CCTextureCache sharedTextureCache] addImage:@"gray_tiger.png"]]; } } } } -(BOOL)ok:(int)r:(int)c{ return r >= 0 && r < R && c >= 0 && c < C; } But it's only working for left to right,not working for right to left. And it is also skipping first object. Thanks in advance.

    Read the article

  • It happens only at Devoxx ...

    - by arungupta
    After attending several Java conferences world wide, this was my very first time at Devoxx. Here are some items I found that happens only at Devoxx ... Pioneers of theater-style seating - This not only provides comfortable seating for each attendee but the screens are very clearly visible to everybody in the room. Intellectual level of attendees is very high - Read more explanation on the Java EE 6 lab blog. In short, a lab, 1/3 of the content delivered at Devoxx 2011, could not be completed at other developer days in more than 1/3 the time. Snack box for lunches - Even though this suits well to the healthy lifestyle of multiple-snacks-during-a-day style but leaves attendees hungry sooner in the day. The longer breaks before the next snack in the evening does not help at all. Fortunately, Azure cupcakes and Android ice creams turned out to be handy. I finally carried my own apple :-) Wrist band instead of lanyard - The good part about this is that once tied to your hand then you are less likely to forget in your room. But OTOH you are a pretty much a branded conference attendee all through out the city. It was cost effective as it costed 20c as opposed to 1 euro for the lanyard. Live streaming from theater #8 (the biggest room) on parleys.com All talks recorded and released on parleys.com over next year. This allows attendees to not to miss any session and watch replay at their own leisure. Stephan promised to start sharing the sessions by mid December this year. No need to pre-register for a session - This is true for most of the conferences but bigger rooms (+ overflow room for key sessions) provide sufficient space for all those who want to attend the session. And of course all sessions are available on parleys.com anyway! Community votes on whiteboard - Devoxx attendees gets a chance to vote on topics ranging from their favorite non-Java language, operating system, or love from Oracle. Captured pictures at the end of Day 2 are shown below. Movie on the last but one night - This year it was The Adventures of Tintin and was lots of fun. Fries with mayo - This is a typical Belgian thing. Guys going in ladies room to avoid the long queues ... wow! Tweet wall everywhere and I mean literally everywhere, in rooms, hallways, front desk, and other places. The tweet picking algorithm was not very clear as I never saw my tweet appear on the wall ;-) You can also watch it at wall.devoxx.com. Cozy speaker dinner with great food and wine List of parallel and upcoming sessions displayed on the screen - This makes the information more explicit with the attendees. REST API with multiple mobile clients - This API is also used by some other conferences as well. And there always is iphone.devoxx.com. Steering committee members were recognized multiple times. The committee members were clearly identifiable wearing red hoodies. The wireless SSID was intuitive "Devoxx" but hidden to avoid some crap from Microsoft Windows. All of 9000 addresses were used up most of the times with each attendee having multiple devices. A 1 GB fibre optic cable was stretched to Metropolis to support the required network bandwidth. Stephan is already planning to upgrade the equipment and have a better infrastructure next year. Free water, soda, juice in a cooler Kinect connected to TV screens so that attendees can use their hands to browse through the list of sesssions. #devoxxblog, #devoxxwomen, #devoxxfrance, #devoxxgreat, #devoxxsuggestions And Devoxx attendees are called Devoxxians ... how cool is that ? :-) What other things do you think happen only at Devoxx ? And now the pictures from the community whiteboard: And a more complete album (including bigger pics of community votes) is available below:

    Read the article

  • Get to Know a Candidate (3 of 25): Virgil Goode&ndash;Constitution Party

    - by Brian Lanham
    DISCLAIMER: This is not a post about “Romney” or “Obama”. This is not a post for whom I am voting. Information sourced for Wikipedia. Meet Virgil Goode of the Constitution Party Goode was served as a Republican member of the United States House of Representatives from 1997 to 2009. He represented the 5th congressional district of Virginia. Goode was born in Richmond, Virginia, the son of Alice Clara (née Besecker) and Virgil Hamlin Goode. He has spent most of his life in Rocky Mount. Goode graduated with a B.A. from the University of Richmond (Phi Beta Kappa) and with a J.D. from the University of Virginia School of Law. He also is a member of Lambda Chi Alpha Fraternity and served in the Army National Guard from 1969 to 1975. Goode grew up as a Democrat. He entered politics soon after graduating from law school. At the age of 27, he won a special election to the state Senate from a Southside district as an independent after the death of the Democratic incumbent. One of his major campaign focuses at the time was advocacy for the Equal Rights Amendment. Soon after being elected, he joined the Democrats. Goode wore his party ties very loosely. He became famous for his support of the tobacco industry, expressing his fear that "his elderly mother would be denied 'the one last pleasure' of smoking a cigarette on her hospital deathbed." He was an ardent defender of gun rights while being an enthusiastic supporter of L. Douglas Wilder, who later became the first elected black governor in the history of the United States. At the Democratic Party's state political convention in 1985, Goode nominated Wilder for lieutenant governor. However, while governor, Wilder cracked down on the sale of guns in the state. After the 1995 elections resulted in a 20–20 split between Democrats and Republicans in the State Senate, Goode seriously considered voting with the Republicans on organizing the chamber. Had he done so, the State Senate would have been under Republican control for the first time since Reconstruction (the Republicans ultimately won control outright in 1999). Goode's actions at the time "forced his party to share power with Republican lawmakers in the state legislature," which further upset the Democratic Party. Goode is on the ballot in CA, FL, ID, IO, LA, MI, MN, MS, MI, NJ, NM, NY, NV, ND, OH, SC, SD, TN, UT, VA, WA, WI, WY.  He is a write-in candidate in CA, CT, DC, GA, IL, IN, ME, MD, MA, MO, NC, TX, VT, WV Constitution Party This party was founded as the “U.S. Taxpayers’ Party” and considers itself conservative. The party's platform is predicated on the principles of the nation's founding documents. The party puts a large focus on immigration, calling for stricter penalties towards illegal immigrants and a moratorium on legal immigration until all federal subsidies to immigrants are discontinued.The party absorbed the American Independent Party, originally founded for George Wallace's 1968 presidential campaign. The American Independent Party of California has been an affiliate of the Constitution Party since its founding; however, current party leadership is disputed and the issue is in court to resolve this conflict. The Constitution Party has some substantial support from the Christian Right and in 2010 achieved major party status in Colorado. Learn more about Virgil Goode and Constitution Party on Wikipedia.

    Read the article

< Previous Page | 387 388 389 390 391 392 393 394 395 396 397 398  | Next Page >