Search Results

Search found 17970 results on 719 pages for 'crystal reports 2008'.

Page 392/719 | < Previous Page | 388 389 390 391 392 393 394 395 396 397 398 399  | Next Page >

  • Data Mining Resources

    - by Dejan Sarka
    There are many different types of analyses, each one with its own pros and cons. Relational reports have a predefined structure, and end users cannot change it. They are simple to use for end users. Reports can use real-time data and snapshots of data to show the state of a report at specific points in time. One of the drawbacks is that report authoring is limited to IT pros and advanced users. Any kind of dynamic restructuring is very limited. If real-time data is used for a report, the report has a negative impact on the performance of the source system. Processing of the reports might be slow because the data comes from relational database management systems, which are not optimized for reporting only. If you create a semantic model of your data, your end users can create ad-hoc report structures. However, the development is more complex because a developer is needed to create these semantic models. For OLAP, you typically use specialized database management systems. You get lightning speed of analyses. End users can use rich and thin clients to interactively change the structure of the report. Typically, they do it graphically. However, the development of an OLAP system is many times quite complex. It involves the preparation and maintenance of an enterprise data warehouse and OLAP cubes. In order to exploit the possibility of real-time restructuring of reports, the users must be both active and educated. The data is usually stale, as it is loaded into data warehouses and OLAP cubes with a scheduled process. With data mining, a structure is not selected in advance; it searches for the structure. As a result, data mining can give you the most valuable results because you can discover patterns you did not expect. A data mining model structure is limited only by the attributes that you use to train the model. One of the drawbacks is that a lot of knowledge is needed for a successful data mining project. End users have to understand the results. Subject matter experts and IT professionals need to understand business problem thoroughly. The development might be sometimes even more complex than the development of OLAP cubes. Each type of analysis has its own place in an enterprise system. SQL Server has tools for all kinds of analyses. However, data mining is the most advanced way of analyzing the data; this is the “I” in BI. In order to get the most out of it, you need to learn quite a lot. In this blog post, I am gathering together resources for learning, including forthcoming events. Books Multiple authors: SQL Server MVP Deep Dives – I wrote an introductory data mining chapter there. Erik Veerman, Teo Lachev and Dejan Sarka: MCTS Self-Paced Training Kit (Exam 70-448): Microsoft SQL Server 2008 - Business Intelligence Development and Maintenance – you can find a good overview of a complete BI solution, including data mining, in this book. Jamie MacLennan, ZhaoHui Tang, and Bogdan Crivat: Data Mining with Microsoft SQL Server 2008 – can’t miss this book if you want to mine your data with SQL Server tools. Michael Berry, Gordon Linoff: Mastering Data Mining: The Art and Science of Customer Relationship Management – data mining from both, business and technical perspective. Dorian Pyle: Data Preparation for Data Mining – an in-depth book about data preparation. Thomas and Ronald Wonnacott: Introductory Statistics – if you thought that you could get away without statistics, then you are not serious about data mining. Jiawei Han and Micheline Kamber: Data Mining Concepts and Techniques – in-depth explanation of the most popular data mining algorithms. Michael Berry and Gordon Linoff: Data Mining Techniques – another book that explains data mining algorithms, more fro a business perspective. Paolo Guidici: Applied Data Mining – very mathematical book, only if you enjoy statistics and mathematics in general. Forthcoming presentations I am presenting two data mining related sessions during the PASS Summit in Charlotte, NC: Wednesday, October 16th, 2013 - Fraud Detection: Notes from the Field – I am showing how to use data mining for a specific business problem. The presentation is based on real-life projects. Friday, October 18th: Excel 2013 Advanced Analytics – I am focusing on Excel Data Mining Add-ins, and how to use them together with Power Pivot and other add-ins. This is the most you can get out of Excel. Sinergija 2013, Belgrade, Serbia Tuesday, October 22nd: Excel 2013 Analytics to the Max – another presentation focusing on the most advanced analytics you can get in Excel. SQL Rally Amsterdam, Netherlands Thursday, November 7th: Advanced Analytics in Excel 2013 – and again I am presenting about data mining in Excel. Why three different titles for the same presentation? I don’t know, I guess I forgot the name I proposed every time right after I sent the proposal. Courses Data Mining with SQL Server 2012 – I wrote a 3-day course for SolidQ. If you are interested in this course, which I could also deliver in a shorter seminar way, you can contact your closes SolidQ subsidiary, or, of course, me directly on addresses [email protected] or [email protected]. This course could also complement the existing courseware portfolio of training providers, which are welcome to contact me as well. OK, now you know: no more excuses, start learning data mining, get the most out of your data

    Read the article

  • SQL SERVER – Simple Example to Configure Resource Governor – Introduction to Resource Governor

    - by pinaldave
    Let us jump right away with question and answer mode. What is resource governor? Resource Governor is a feature which can manage SQL Server Workload and System Resource Consumption. We can limit the amount of CPU and memory consumption by limiting /governing /throttling on the SQL Server. Why is resource governor required? If there are different workloads running on SQL Server and each of the workload needs different resources or when workloads are competing for resources with each other and affecting the performance of the whole server resource governor is a very important task. What will be the real world example of need of resource governor? Here are two simple scenarios where the resource governor can be very useful. Scenario 1: A server which is running OLTP workload and various resource intensive reports on the same server. The ideal situation is where there are two servers which are data synced with each other and one server runs OLTP transactions and the second server runs all the resource intensive reports. However, not everybody has the luxury to set up this kind of environment. In case of the situation where reports and OLTP transactions are running on the same server, limiting the resources to the reporting workload it can be ensured that OTLP’s critical transaction is not throttled. Scenario 2: There are two DBAs in one organization. One DBA A runs critical queries for business and another DBA B is doing maintenance of the database. At any point in time the DBA A’s work should not be affected but at the same time DBA B should be allowed to work as well. The ideal situation is that when DBA B starts working he get some resources but he can’t get more than defined resources. Does SQL Server have any default resource governor component? Yes, SQL Server have two by default created resource governor component. 1) Internal –This is used by database engine exclusives and user have no control. 2) Default – This is used by all the workloads which are not assigned to any other group. What are the major components of the resource governor? Resource Pools Workload Groups Classification In simple words here is what the process of resource governor is. Create resource pool Create a workload group Create classification function based on the criteria specified Enable Resource Governor with classification function Let me further explain you the same with graphical image. Is it possible to configure resource governor with T-SQL? Yes, here is the code for it with explanation in between. Step 0: Here we are assuming that there are separate login accounts for Reporting server and OLTP server. /*----------------------------------------------- Step 0: (Optional and for Demo Purpose) Create Two User Logins 1) ReportUser, 2) PrimaryUser Use ReportUser login for Reports workload Use PrimaryUser login for OLTP workload -----------------------------------------------*/ Step 1: Creating Resource Pool We are creating two resource pools. 1) Report Server and 2) Primary OLTP Server. We are giving only a few resources to the Report Server Pool as described in the scenario 1 the other server is mission critical and not the report server. ----------------------------------------------- -- Step 1: Create Resource Pool ----------------------------------------------- -- Creating Resource Pool for Report Server CREATE RESOURCE POOL ReportServerPool WITH ( MIN_CPU_PERCENT=0, MAX_CPU_PERCENT=30, MIN_MEMORY_PERCENT=0, MAX_MEMORY_PERCENT=30) GO -- Creating Resource Pool for OLTP Primary Server CREATE RESOURCE POOL PrimaryServerPool WITH ( MIN_CPU_PERCENT=50, MAX_CPU_PERCENT=100, MIN_MEMORY_PERCENT=50, MAX_MEMORY_PERCENT=100) GO Step 2: Creating Workload Group We are creating two workloads each mapping to each of the resource pool which we have just created. ----------------------------------------------- -- Step 2: Create Workload Group ----------------------------------------------- -- Creating Workload Group for Report Server CREATE WORKLOAD GROUP ReportServerGroup USING ReportServerPool ; GO -- Creating Workload Group for OLTP Primary Server CREATE WORKLOAD GROUP PrimaryServerGroup USING PrimaryServerPool ; GO Step 3: Creating user defiled function which routes the workload to the appropriate workload group. In this example we are checking SUSER_NAME() and making the decision of Workgroup selection. We can use other functions such as HOST_NAME(), APP_NAME(), IS_MEMBER() etc. ----------------------------------------------- -- Step 3: Create UDF to Route Workload Group ----------------------------------------------- CREATE FUNCTION dbo.UDFClassifier() RETURNS SYSNAME WITH SCHEMABINDING AS BEGIN DECLARE @WorkloadGroup AS SYSNAME IF(SUSER_NAME() = 'ReportUser') SET @WorkloadGroup = 'ReportServerGroup' ELSE IF (SUSER_NAME() = 'PrimaryServerPool') SET @WorkloadGroup = 'PrimaryServerGroup' ELSE SET @WorkloadGroup = 'default' RETURN @WorkloadGroup END GO Step 4: In this final step we enable the resource governor with the classifier function created in earlier step 3. ----------------------------------------------- -- Step 4: Enable Resource Governer -- with UDFClassifier ----------------------------------------------- ALTER RESOURCE GOVERNOR WITH (CLASSIFIER_FUNCTION=dbo.UDFClassifier); GO ALTER RESOURCE GOVERNOR RECONFIGURE GO Step 5: If you are following this demo and want to clean up your example, you should run following script. Running them will disable your resource governor as well delete all the objects created so far. ----------------------------------------------- -- Step 5: Clean Up -- Run only if you want to clean up everything ----------------------------------------------- ALTER RESOURCE GOVERNOR WITH (CLASSIFIER_FUNCTION = NULL) GO ALTER RESOURCE GOVERNOR DISABLE GO DROP FUNCTION dbo.UDFClassifier GO DROP WORKLOAD GROUP ReportServerGroup GO DROP WORKLOAD GROUP PrimaryServerGroup GO DROP RESOURCE POOL ReportServerPool GO DROP RESOURCE POOL PrimaryServerPool GO ALTER RESOURCE GOVERNOR RECONFIGURE GO I hope this introductory example give enough light on the subject of Resource Governor. In future posts we will take this same example and learn a few more details. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: Resource Governor

    Read the article

  • Ardour won't rewind when jack time master

    - by Edward
    Using Ubuntu Studio 12.04, ardour will not rewind when it is set to the jack time master. I've read that this could be due to a jack/ardour version conflict, but I am not sure what the correct combo should be. The same thing happens with "ardour 2.8.14 (built from revision 13065)" and "ardour 2.8.12 (built from revision 10144)". The latter is the default installation with ubuntu studio 12.04 LTS. Linux "/proc/version" reports as Linux version 3.2.0-23-lowlatency-pae (buildd@vernadsky) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu4) ) #31-Ubuntu SMP PREEMPT Wed Apr 11 04:07:36 UTC 2012 and "jackd --version" reports as: jackdmp 1.9.8 Copyright 2001-2005 Paul Davis and others. Copyright 2004-2011 Grame. jackdmp comes with ABSOLUTELY NO WARRANTY This is free software, and you are welcome to redistribute it under certain conditions; see the file COPYING for details jackdmp version 1.9.8 tmpdir /dev/shm protocol 8 Thanks for any help.

    Read the article

  • Oracle GRC in Leader’s Quadrant on Gartner’s Magic Quadrant for Enterprise Governance Risk and Compliance Platforms

    - by Di Seghposs
    Once again Gartner has recognized Oracle as a Leader in their Magic Quadrant for Enterprise Governance Risk and Compliance (EGRC) Platforms report, stating that “Oracle remains in the Leader’s quadrant based on overall corporate viability, proven execution against its road map, and advanced capabilities to integrate risk management and performance management.”  In the report, Gartner cited that Oracle clearly understands the GRC challenges faced by a number of verticals, and also the trends toward the integration of risk management and performance management.  Gartner produces Magic Quadrant reports to provide guidance to their clients on available solutions in specific categories. This Magic Quadrant reports takes a holistic view of EGRC solutions and based on selected criteria, places vendors in one of the four quadrants - leaders, challengers, visionaries and niche. We are proud to be in the leader category! Click here to read the full report. Congratulations to our product development, strategy, and marketing teams for creating a world-class, market-leading GRC solution! Oracle GRC: Designed to manage risk, improve controls and reduce costs

    Read the article

  • Auto Mocking using JustMock

    - by mehfuzh
    Auto mocking containers are designed to reduce the friction of keeping unit test beds in sync with the code being tested as systems are updated and evolve over time. This is one sentence how you define auto mocking. Of course this is a more or less formal. In a more informal way auto mocking containers are nothing but a tool to keep your tests synced so that you don’t have to go back and change tests every time you add a new dependency to your SUT or System Under Test. In Q3 2012 JustMock is shipped with built in auto mocking container. This will help developers to have all the existing fun they are having with JustMock plus they can now mock object with dependencies in a more elegant way and without needing to do the homework of managing the graph. If you are not familiar with auto mocking then I won't go ahead and educate you rather ask you to do so from contents that is already made available out there from community as this is way beyond the scope of this post. Moving forward, getting started with Justmock auto mocking is pretty simple. First, I have to reference Telerik.JustMock.Container.DLL from the installation folder along with Telerik.JustMock.DLL (of course) that it uses internally and next I will write my tests with mocking container. It's that simple! In this post first I will mock the target with dependencies using current method and going forward do the same with auto mocking container. In short the sample is all about a report builder that will go through all the existing reports, send email and log any exception in that process. This is somewhat my  report builder class looks like: Reporter class depends on the following interfaces: IReporBuilder: used to  create and get the available reports IReportSender: used to send the reports ILogger: used to log any exception. Now, if I just write the test without using an auto mocking container it might end up something like this: Now, it looks fine. However, the only issue is that I am creating the mock of each dependency that is sort of a grunt work and if you have ever changing list of dependencies then it becomes really hard to keep the tests in sync. The typical example is your ASP.NET MVC controller where the number of service dependencies grows along with the project. The same test if written with auto mocking container would look like: Here few things to observe: I didn't created mock for each dependencies There is no extra step creating the Reporter class and sending in the dependencies Since ILogger is not required for the purpose of this test therefore I can be completely ignorant of it. How cool is that ? Auto mocking in JustMock is just released and we also want to extend it even further using profiler that will let me resolve not just interfaces but concrete classes as well. But that of course starts the debate of code smell vs. working with legacy code. Feel free to send in your expert opinion in that regard using one of telerik’s official channels. Hope that helps

    Read the article

  • Extending QuickBooks Reporting with the QuickBooks ADO.NET Data Provider

    - by dataintegration
    The ADO.NET Provider for QuickBooks comes with several reports you may request from QuickBooks by default. However, there are many more that are not readily available. The ADO.NET Provider for QuickBooks makes it easy for you to create new reports and customize existing ones. In this article, we will illustrate how to create your own report and retrieve it from the Server Explorer in Visual Studio. For this example we will show how to create an Item Profitability Report. Creating the report script file Step 1: Download the sample reports available here. Extract them to a folder of your choice. Step 2: Make a copy of the ReportGeneralSummary.rsd file and rename it to ItemProfitability.rsd. Then open the file in any text editor. Step 3: Open the installation directory of the ADO.NET Provider for QuickBooks. Under the \db\ folder, locate the ReportJob.rsb file. Open this file in another text editor. Note: Although we are using ReportJob.rsb for this example, other reports may be contained in other Report*.rsb files. We recommend consulting the included help file and first locating the Report stored procedure and ReportType you are looking for. Otherwise, you may open each Report*.rsb file and look under the "reporttype" input for the report you are attempting to create. Step 4: First, let's rename the title of ItemProfitability.rsd. Near the top of the file you will see a title and description. Change the title to match the name of the file. Change the description to anything you like. For example: <rsb:info title="ItemProfitability" description="Executes my custom report."> Just below the Title, there are a number of columns. The Id represents the row number. The RowType represents the type of data returned by QuickBooks. The ColumnValue* columns represent all of the column data returned by QuickBooks. In some instances, we may need to add additional ColumnValue columns. Step 5: To add additional ColumnValue columns, simply copy the last column, paste it directly below, and continue increasing the numerical value at end of the attribute name. For example: <attr name="ColumnValue9" xs:type="string" readonly="true" required="false" desc="Represents a column of data."/> <attr name="ColumnValue10" xs:type="string" readonly="true" required="false" desc="Represents a column of data."/> <attr name="ColumnValue11" xs:type="string" readonly="true" required="false" desc="Represents a column of data."/> <attr name="ColumnValue12" xs:type="string" readonly="true" required="false" desc="Represents a column of data."/> ... Caution: Do not rename the ColumnValue* definitions themselves. They are generalized so that we can understand each type of report returned by QuickBooks. Renaming them to something other than ColumnValue* will cause your columns to return with null values. Step 6: Now let's update the available inputs for the table. From the ReportJob.rsb file, copy all of the input elements into ItemProfitability under the "Psuedo-Column definitions" comment. You will be replacing the existing input elements in ItemProfitability with inputs from ReportJob. When you are done, it should look like this: <!-- Psuedo-Column definitions --> <input name="reporttype" description="The type of the report." value="ITEMESTIMATESVSACTUALS,ITEMPROFITABILITY,JOBESTIMATESVSACTUALSDETAIL,JOBESTIMATESVSACTUALSSUMMARY,JOBPROFITABILITYDETAIL,JOBPROFITABILITYSUMMARY," default="ITEMESTIMATESVSACTUALS" /> <input name="reportperiod" description="Report date range in the format (fromdate:todate), and either value may be omitted for an open ended range (e.g. 2009-12-25:). Supported date format: yyyy-MM-dd." /> <input name="reportdaterangemacro" description="Use a predefined date range." value="ALL,TODAY,THISWEEK,THISWEEKTODATE,THISMONTH,THISMONTHTODATE,THISQUARTER,THISQUARTERTODATE,THISYEAR,THISYEARTODATE,YESTERDAY,LASTWEEK,LASTWEEKTODATE,LASTMONTH,LASTMONTHTODATE,LASTQUARTER,LASTQUARTERTODATE,LASTYEAR,LASTYEARTODATE,NEXTWEEK,NEXTFOURWEEKS,NEXTMONTH,NEXTQUARTER,NEXTYEAR," default="ALL" /> ... Step 7: Now let's update the operationname attribute. This needs to match the same operationname used by ReportJob. After you have copied the correct value from ReportJob.rsb, the operationname in ItemProfitability should look like so: <rsb:set attr="operationname" value="qbReportJob"/> Step 8: There is one more thing we can do to make this a true Item Profitability report. We can remove the reporttype input and hardcode the value. To do this, copy and paste the rsb:set used for operationname. Then rename the attr and value to match the name and value you want to use. For example: <rsb:set attr="operationname" value="qbReportJob"/> <rsb:set attr="reporttype" value="ITEMPROFITABILITY"/> After this you can remove the input for reporttype. Now that you have your own report file, we can move on to displaying the report in the Visual Studio server explorer. Accessing the report through the Data Provider Step 1: Open Visual Studio. In the Server Explorer, configure a new connection with the QuickBooks Data Provider. Step 2: For the Location connection string property, enter the directory where the new report has been saved to. Step 3: The new report should appear as a new view in the Server Explorer. Let's retrieve data from it. Step 4: You can specify any inputs in the WHERE clause. New Report Example Script To help you get started using this new QuickBooks Data Provider report, you will need to download the QuickBooks ADO.NET Data Provider and the fully functional sample script.

    Read the article

  • Will there be a difference between Unity "Desktop" and Unity "Netbook" interface?

    - by bash
    What has me slightly confused from all the different reports about Unity becoming the default shell in the 11.04 desktop edition: Some claim and this is how most people seem to see it, that what currently is the UNE interface will be taken 1:1 (including any changes made during the Natty cycle) and used as the interface for the desktop version - meaning that the interface will be exactly the same for 11.04 UNE and UDE. Some other reports talk more along the lines a "desktop unity", making it sound, that while both will be using Unity, the Desktop edition will get it's own Unity, tailored specifically towards the Desktop formfactor. So both editions will be using Unity, but with slight differences in the layout or interface. So my question is, will there be any difference between 11.04 Unity "Desktop" and Unity "Netbook" interface?

    Read the article

  • Is this overkill? Using MDX queries and cubes instead of SQL stored procedures

    - by Jason Holland
    I am new to Microsoft's SQL Server Analysis Services Cubes and MDX queries. Where I work we have a daily sales table in SQL Server 2005 that already contains an aggregate of sale information per store per day. At this time it contains only 164,000+ rows. We have a sales cube dedicated to this table that about 15 reports are based off of. Now, I should also note that we generate reports based on our own fiscal year criteria: a 13 period year (1 month equals 28 days etc.). Is this overkill? At what point is it justified to begin using SSAS Cubes/MDX over plain old SQL Server stored procedures? Since I have always been just using plain old SQL am I tragically late to the MDX party?

    Read the article

  • USB drives not recognized all of a sudden (module usb_storage not loading)

    - by Siddharth
    I am very close to the solution, just need to know how to get usb-storage to load I have tried most of the advice on askubuntu and other sites, usb_storage enable to fdisk -l. But I am unable to find steps to get it working again. sudo lsusb results Bus.... skipped 4 lines Bus 004 Device 002: ID 413c:3012 Dell Computer Corp. Optical Wheel Mouse Bus 005 Device 002: ID 413c:2105 Dell Computer Corp. Model L100 Keyboard Bus 001 Device 005: ID 8564:1000 sudo dmseg | tail reports [ 69.567948] usb 1-4: USB disconnect, device number 4 [ 74.084041] usb 1-6: new high-speed USB device number 5 using ehci_hcd [ 74.240484] Initializing USB Mass Storage driver... [ 74.256033] scsi5 : usb-storage 1-6:1.0 [ 74.256145] usbcore: registered new interface driver usb-storage [ 74.256147] USB Mass Storage support registered. [ 74.257290] usbcore: deregistering interface driver usb-storage fdisk -l reports Device Boot Start End Blocks Id System /dev/sda1 * 2048 972656639 486327296 83 Linux /dev/sda2 972658686 976771071 2056193 5 Extended /dev/sda5 972658688 976771071 2056192 82 Linux swap / Solaris I think I need steps to install and get usb_storage module working. Edit : I tried sudo modprobe -v usb-storage reports sudo modprobe -v usb-storage insmod /lib/modules/3.2.0-48-generic-pae/kernel/drivers/usb/storage/usb-storage.ko Edit : jsiddharth@siddharth-desktop:~$ sudo udevadm monitor --udev monitor will print the received events for: UDEV - the event which udev sends out after rule processing UDEV [4757.144372] add /module/usb_storage (module) UDEV [4757.146558] remove /module/usb_storage (module) UDEV [4757.148707] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6 (usb) UDEV [4757.149699] add /bus/usb/drivers/usb-storage (drivers) UDEV [4757.151214] remove /bus/usb/drivers/usb-storage (drivers) UDEV [4757.156873] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0 (usb) UDEV [4757.160903] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9 (scsi) UDEV [4757.164672] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9/scsi_host/host9 (scsi_host) UDEV [4757.165163] remove /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9/scsi_host/host9 (scsi_host) UDEV [4757.165440] remove /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9 (scsi) Narrowing down more : Seems like I need usb_storage to load as a module jsiddharth@siddharth-desktop:~$ lsmod | grep usb usbserial 37201 0 usbhid 41937 0 hid 77428 1 usbhid Still no usb driver mounted. Nor does a device show up in /dev. Any step by step process to debug and fix this will be really helpful.

    Read the article

  • SSIS Reporting Pack update

    - by jamiet
    Its been a while since I last posted anything in regard to SSIS Reporting Pack, the most recent release being on 27th May 2012, so here is a short update. There is still lots of work to do on SSIS Reporting Pack; lots more features to add, lots of performance work to be done, and a few bug fixes too. I have also been (fairly) hard at work on a framework to be used in conjunction with SSIS 2012 that I refer to as the Restart Framework (currently residing at http://ssisrestartframework.codeplex.com/). There is still much work to be done on the Restart Framework (not least some useful documentation on how to use it) which is why I haven’t mentioned it publicly before now although I am actively checking in changes. One thing I am considering is amalgamating the two projects into one; this would mean I could build a suite of reports that both work against the SSIS Catalog (what you currently know as “SSIS Reporting Pack”) and also against this Restart Framework thing. No decision has been made as yet though. There have been a number of bug reports and feature suggestions for SSIS Reporting Pack added to the Issue Tracker. Thank you to everyone that has submitted something, rest assured I am not going to ignore them forever; my time is at a premium right now unfortunately due to … well … life… so working on these items isn’t near the top of my priority list. Lastly, I am actively using SSIS Reporting Pack in a production environment right now and I’m happy to report that it is proving to be very useful. One of the reports that I have put a lot of time into is execution executable duration.rdl and its proving very adept at easily identifying bottlenecks in our SSIS 2012 executions: The report allows you to browse through the hierarchy of executables in each execution and each bar represents the duration of each executable in relation to all the other executables; longer bars being a good indication of where problems might lie. The colour of the bar indicates whether it was successful or not (green=success). Hovering over a bar brings up a tooltip showing more information about that executable. Clicking on a bar allows you to compare this particular instance of the executable against other executions. Please do let me know if you are using SSIS Reporting Pack. I would like to hear any anecdotes you might have, good or bad. @Jamiet

    Read the article

  • SQLAuthority News – Various Microsoft SQL Server Documentations Available for Download

    - by pinaldave
    Microsoft has recently released various SQL Server related documentations and here I have listed them here for quick reference. Microsoft SQL Server Protocol Documentation The Microsoft SQL Server protocol documentation provides technical specifications for Microsoft proprietary protocols that are implemented and used in Microsoft SQL Server 2008. Microsoft SQL Server Protocol Documentation The SQL Server data portability documentation explains various mechanisms by which user-created data in SQL Server can be extracted for use in other software products. These mechanisms include import/export functionality, documented APIs, industry standard formats, or documented data structures/file formats. SQL Server Standards Support Documentation The SQL Server standards support documentation provides detailed support information for certain standards that are implemented in Microsoft SQL Server. Microsoft Product Support Reports Download the scripted system configuration gathering tools. The Microsoft Product Support Reports utility facilitates the gathering of critical system and logging information used in troubleshooting support issues. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Download, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • USB drives not recognized all of a sudden (usb_storage not loaded lsmod does not report usb_storage)

    - by Siddharth
    I have tried most of the advice on askubuntu and other sites, usb_storage enable to fdisk -l. But I am unable to find steps to get it working again. sudo lsusb results Bus.... skipped 4 lines Bus 004 Device 002: ID 413c:3012 Dell Computer Corp. Optical Wheel Mouse Bus 005 Device 002: ID 413c:2105 Dell Computer Corp. Model L100 Keyboard Bus 001 Device 005: ID 8564:1000 sudo dmseg | tail reports [ 69.567948] usb 1-4: USB disconnect, device number 4 [ 74.084041] usb 1-6: new high-speed USB device number 5 using ehci_hcd [ 74.240484] Initializing USB Mass Storage driver... [ 74.256033] scsi5 : usb-storage 1-6:1.0 [ 74.256145] usbcore: registered new interface driver usb-storage [ 74.256147] USB Mass Storage support registered. [ 74.257290] usbcore: deregistering interface driver usb-storage fdisk -l reports Device Boot Start End Blocks Id System /dev/sda1 * 2048 972656639 486327296 83 Linux /dev/sda2 972658686 976771071 2056193 5 Extended /dev/sda5 972658688 976771071 2056192 82 Linux swap / Solaris I think I need steps to install and get usb_storage module working. Edit : I tried sudo modprobe -v usb-storage reports sudo modprobe -v usb-storage insmod /lib/modules/3.2.0-48-generic-pae/kernel/drivers/usb/storage/usb-storage.ko Edit : jsiddharth@siddharth-desktop:~$ sudo udevadm monitor --udev monitor will print the received events for: UDEV - the event which udev sends out after rule processing UDEV [4757.144372] add /module/usb_storage (module) UDEV [4757.146558] remove /module/usb_storage (module) UDEV [4757.148707] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6 (usb) UDEV [4757.149699] add /bus/usb/drivers/usb-storage (drivers) UDEV [4757.151214] remove /bus/usb/drivers/usb-storage (drivers) UDEV [4757.156873] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0 (usb) UDEV [4757.160903] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9 (scsi) UDEV [4757.164672] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9/scsi_host/host9 (scsi_host) UDEV [4757.165163] remove /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9/scsi_host/host9 (scsi_host) UDEV [4757.165440] remove /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9 (scsi) Narrowing down more : Seems like I need usb_storage to load as a module jsiddharth@siddharth-desktop:~$ lsmod | grep usb usbserial 37201 0 usbhid 41937 0 hid 77428 1 usbhid Still no usb driver mounted. Nor does a device show up in /dev. Any step by step process to debug and fix this will be really helpful.

    Read the article

  • Trigger Happy

    - by Tim Dexter
    Its been a while, I know, we’ll say no more OK? I’ll just write …In the latest BIP 11.1.1.6 release and if I’m really honest; the release before this (we'll call it dot 5 for brevity.) The boys and gals in the engine room have been real busy enhancing BIP with some new functionality. Those of you that use the scheduling engine in OBIEE may already know and use the ‘conditional scheduling’ feature. This allows you to be more intelligent about what reports get run and sent to folks on a scheduled basis. You create a ‘trigger’ analysis (answer) that is executed at schedule time prior to the main report. When the schedule rolls around, the trigger is run, if it returns rows, then the main report is run and delivered. If there are no rows returned, then the main report is not run. Useful right? Your users are not bombarded with 20 reports in their inbox every week that they need to wade throu. They get a handful that they know they need to look at. If you ensure you use conditional formatting in the report then they can find the anomalous data in the reports very quickly and move on to the rest of their day more quickly. You could even think of OBIEE as a virtual team member, scouring the data on your behalf 24/7 and letting you know when its found an issue.BI Publisher, wanting the team t-shirt and the khaki pants, has followed suit. You can now set up ‘triggers’ for it to execute before it runs the main report. Just like its big brother, if the scheduled report trigger returns rows of data; it then executes the main report. Otherwise, the report is skipped until the next schedule time rolls around. Sound familiar?BIP differs a little, in that you only need to construct a query to act as the trigger rather than a complete report. Let assume we have a monthly wage by department report on a schedule. We only want to send the report to managers if their departmental wages reach and/or exceed a certain amount. The toughest part about this is coming up with the SQL to test the business rule you want to implement. For my example, its not that tough: select d.department_name, sum(e.salary) as wage_total from employees e, departments d where d.department_id = e.department_id group by d.department_name having sum(e.salary) > 230000 We're looking for departments where the wage cost is greater than 230,000 Dexter Dollars! With a bit of messing I found out you can parametrize the query. Users can then set a value at schedule time if they need to. To create the trigger is straightforward enough. You can create multiple triggers for users to select at schedule time. Notice I also used a parameter in the query, :wamount. Note the matching parameter in the tree on the left. You also dont need to return multiple columns, one is fine, the key is if there are rows returned. You can build the rest of your report as usual. At scheduling time the Schedule tab has a bit more on it. If your users want to set the trigger, they check the Use Trigger box. The page will then pop fields to pick the appropriate trigger they want to use, even a trigger on another data model if needed. Note it will also ask for the parameter value associated with the trigger. At this point you should note that the data model does not make a distinction between trigger and data model (extract) parameters. So users will see the parameters on the General and Schedule tabs. If per chance you do need to just have a trigger parameters. You can just hide them from the report using the Parameters popup in the report designer, just un-check the 'Show' box I have tested the opposite case where you do not want main report parameters seen in the trigger section. BIP handles that for you! Once the report hits its allotted schedule time, the trigger is executed. Based on the results the report will either run or be 'skipped.' Now, you have a smarter scheduler that will only deliver reports when folks need to see them and take action on the contents. More official info here for developers and here for users.

    Read the article

  • combining ruby and C++

    - by Shingetsu
    Hello /* programmers */ (I usually hang in SO) I've been discussing a conceptual project with a friend of mine and the the most effective way we've seen of doing it is writing the engine in C++ while the logic would be done in Ruby. However, we would need data to be passed around often, for example: Engine reports that A happened, that gets triggered in a proc array (event "A" is passed but proc doesnt use it) Ruby decides that we need to wait for B to happen Ruby adds a proc to an array. The array of procs is iterated during each cycle in the C++ engine C++ engine reports that B happened and passes "event B (should be a ruby object) Ruby receives event B and decides what to do next I don't work with multiple languages often, and was wondering if it's possible to implement things in this way. I know that there's the ruby VALUE in C++, but would like to know the standard way of combining the two. (of course I know ruby follows the perl "more than 1 way to do it", but there's often a standardized way)

    Read the article

  • Introducing sp_ssiscatalog (v1.0.0.0)

    - by jamiet
    Regular readers of my blog may know that over the last year I have made available a suite of SQL Server Reporting Services (SSRS) reports that provide visualisations of the data in the SQL Server Integration Services (SSIS) 2012 Catalog. Those reports are available at http://ssisreportingpack.codeplex.com. As I have built these reports and used them myself on a real life project a couple of things have dawned on me: As soon as your SSIS Catalog gets a significant amount of data in it the performance of the reports degrades rapidly. This is hampered by the fact that there are limitations as to the SQL statements that I can embed within a SSRS report. SSIS professionals are data guys at heart and those types of people feel more comfortable in a query environment rather than having to go through the rigmarole of standing up a reporting server (well, I know I do anyway) Hence I have decided to take a different tack with the reporting pack. Taking my lead from Adam Machanic’s sp_whoisactive and Brent Ozar’s sp_blitz I have produced sp_ssiscatalog, a stored procedure that makes it easy to get at the crucial data in the SSIS Catalog. I will spend the rest of this blog explaining exactly what sp_ssiscatalog does and how to use it but if you would rather just download the bits yourself and start to play you can download v1.0.0.0 from DB v1.0.0.0. Usage Scenarios Most Recent Execution I find that the most frequent information that one needs to get from the SSIS Catalog is information pertaining to the most recent execution. Hence if you execute sp_ssiscatalog with no parameters, that is exactly what you will get. EXEC [dbo].[sp_ssiscatalog] This will return up to 5 resultsets: EXECUTION - Summary information about the execution including status, start time & end time EVENTS - All events that occurred during the execution OnError,OnTaskFailed - All events where event_name is either OnError or OnTaskFailed OnWarning - All events where event_name is OnWarning EXECUTABLE_STATS - Duration and execution result of every executable in the execution All 5 resultsets will be displayed if there is any data satisfying that resultset. In other words, if there are no (for example) OnWarning events then the OnWarning resultset will not be displayed. The display of these 5 resultsets can be toggled respectively by these 5 optional parameters (all of which are of type BIT): @exec_execution @exec_events @exec_errors @exec_warnings @exec_executable_stats Any Execution As just explained the default behaviour is to supply data for the most recent execution. If you wish to specify which execution the data should return data for simply supply the execution_id as a parameter: EXEC [dbo].[sp_ssiscatalog] 6 All Executions sp_ssiscatalog can also return information about all executions: EXEC [dbo].[sp_ssiscatalog] @operation_type='execs' The most recent execution will appear at the top. sp_ssiscatalog provides a number of parameters that enable you to filter the resultset: @execs_folder_name @execs_project_name @execs_package_name @execs_executed_as_name @execs_status_desc Some typical usages might be: //Return all failed executions EXEC [dbo].[sp_ssiscatalog] @operation_type='execs',@execs_status_desc='failed' //Return all executions for a specified folder EXEC [dbo].[sp_ssiscatalog] @operation_type='execs',@execs_folder_name='My folder' //Return all executions of a specified package in a specified project EXEC [dbo].[sp_ssiscatalog] @operation_type='execs',@execs_project_name='My project', @execs_package_name='Pkg.dtsx' Installing sp_ssicatalog Under the covers sp_ssiscatalog actually calls many other stored procedures and functions hence creating it on your server is not simply a case of running a CREATE PROCEDURE script. I maintain the code in an SQL Server Data Tools (SSDT) database project which means that you have two ways of obtaining it. Download the source code You can download the latest (at the time of writing) source code from http://ssisreportingpack.codeplex.com/SourceControl/changeset/view/70192. Hit the download button to download all the source code in a zip file. The contents of that zip file will include an SSDT database project which you can open up in SSDT and publish just like any other SSDT database project. You can publish to a new database or any existing database, even [SSISDB] if you prefer. Download a dacpac Maintaining the code in an SSDT database project means that it can all get packaged up into a dacpac that you can then publish to your SQL Server. That dacpac is available from DB v1.0.0.0: Ordinarily a dacpac can be deployed to a SQL Server from SSMS using the Deploy Dacpac wizard however in this case there is a limitation. Due to sp_ssiscatalog referring to objects in the SSIS Catalog (which it has to do of course) the dacpac contains a SqlCmd variable to store the name of the database that underpins the SSIS Catalog; unfortunately the Deploy Dacpac wizard in SSMS has a rather gaping limitation in that it cannot deploy dacpacs containing SqlCmd variables. Hence, we can use the command-line tool, sqlpackage.exe, instead. Don’t worry if reverting to the command-line sounds a little daunting, I assure you it is not. Simply open a Visual Studio command-prompt and cd to the folder containing the downloaded dacpac: Type: "%PROGRAMFILES(x86)%\Microsoft SQL Server\110\DAC\bin\sqlpackage.exe" /action:Publish /TargetDatabaseName:SsisReportingPack /SourceFile:SSISReportingPack.dacpac /Variables:SSISDB=SSISDB /TargetServerName:(local) or the shortened form: "%PROGRAMFILES(x86)%\Microsoft SQL Server\110\DAC\bin\sqlpackage.exe" /a:Publish /tdn:SsisReportingPack /sf:SSISReportingPack.dacpac /v:SSISDB=SSISDB /tsn:(local) remembering to set your server name appropriately (here mine is set to “(local)” ). If everything works successfully you will see this: And you’re done! You’ll have a new database called [SsisReportingPack] which contains sp_ssiscatalog:   Good luck with sp_ssiscatalog. I have been using it extensively on my own projects recently and it has proved to be very useful indeed. Rest-assured however, I will be adding many new capabilities in the future. Feedback is welcome. @Jamiet

    Read the article

  • A testing feedback/report tool?

    - by Mert
    I'm thinking of developing a pluggable test and assessment module. This tool will be used especially for desktop application projects to report and log errors, bugs, missing features and suggestions from testers. The tool will be plugged to the application by putting a small icon to the application itself. When pressed the tool will be visible where user can create entries about the application. Is there already a tool like that? I am not speaking about UI testing btw. For example, this tool might have a form consisting of Page name Environment information Entry type (can be bug, feature request, suggestion) Message User Info (name, contact etc) Date I think such a tool can greatly help testers prepare reports. Developers can understand the issue better and track all the reports.

    Read the article

  • Unable to set default gateway

    - by GrandMasterFlush
    I'm running Ubuntu server via Hyper-V and have successfully installed it but seem unable to ping the server or ping any other machines on the network from the server. After doing a bit of reading I've noticed that the default gateway isn't set but when I try and set it I keep getting error messages which I can't understand. From this article I've tried ip route add default via 10.0.10.200 Which reports: RTNETLINK answers: Operation not permitted If I try running it prefixed with sudo but it reports: `RNETLINK answers: No such process I've editted /etc/network/interfaces but when I start the machine and type netstat -nr there is nothing listed. Can anyone tell me where I'm going wrong please? EDIT : /etc/network/interfaces contains: auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp

    Read the article

  • 2 google analytics profiles for 2 sections of the same site

    - by sam
    Ive got a website which for the most part is a portfolio, there is another section of the site mysite.com/micro-site which ranks extremely well for it chosen term / topic, and brings in lots of traffic, but actually has little to do with the core business. It was really made as a piece of content - in the same way sites like this are - http://chrome.com/campaigns/rollit For the main site i use 1 Google analytics profile and set of tags, for the micro site i have a completely different analytics profile and set of tags. The main reason ive done this is because the traffic stats and insights for the micro site are essentially just noise, its nice to have the traffic but they dont help when reading analytics reports, so if they were combined my analytics reports would be a mess. Is there any disadvantage / negatives of doing this ?

    Read the article

  • SSIS Reporting Pack v0.4 – Execution Report updated

    - by jamiet
    SSIS Reporting Pack is a suite of reports that I maintain at http://ssisreportingpack.codeplex.com/ that provide visualisation over the SSIS Catalog in SQL Server 2012 and attempt to add value over the reports that ship in the box. Work on the reports has stalled (my last SSIS Reporting Pack blog post was on 4th September 2011) as I’ve had rather more important things going on my life of late however I have recently checked-in a fix that couldn’t really be delayed. I discovered a problem with the Execution report that was causing the report to effectively hang, it was caused by this bit of SQL hidden away in the report definition: [generated_executables] AS (   SELECT  [new_executable].[execution_path],[new_executable].[parent_execution_path]   FROM    (           SELECT  [execution_path] = SUBSTRING([loop_iteration].[execution_path] ,1, [loop_iteration].length_exec_path - [loop_iteration].[char_index_close_square] + 1)           ,       [parent_execution_path] = SUBSTRING([loop_iteration].[execution_path] ,1, [loop_iteration].length_exec_path - [loop_iteration].[char_index_open_square])           FROM    (                   SELECT  [execution_path]                   ,       [char_index_open_square] = CHARINDEX('[',REVERSE([execution_path]),1)                   ,       [char_index_close_square] = CHARINDEX(']',REVERSE([execution_path]),1)                   ,       [length_exec_path] = LEN([execution_path])                   FROM    [exec_stats] es                   WHERE   execution_path LIKE '%\[%]%'  ESCAPE '\'                   )AS [loop_iteration]           ) AS [new_executable]   GROUP   BY [new_executable].[execution_path],[new_executable].[parent_execution_path]) It was there because SSIS does not currently treat a loop iteration as an executable yet I figured there was still value in being able to view it as such – this SQL essentially “invents” new executables for those loop iterations; its what enabled the following visualisation: where each of the three iterations of a For Each Loop called “FEL Loop over top performing regions” appear in the report. Unfortunately, as I alluded, this could under certain circumstances (most likely when there were many loop iterations) cause the report to hang as it waited for the results to be constructed and returned. The change that I have made eradicates this generation of “fake” executables and thus produces this visualisation instead: Notice that the three “children” of the For Each Loop are no longer the three iterations but actually the task (“EPT Call Data Export Package”) contained within that For Each Loop. The problem here is of course that there is no longer a visual distinction between those three iterations; I have instead made the full execution path viewable via a tooltip:   If you preferred the “old” way of presenting this information and are happy to put up with the performance degradation then I have kept the old version of the report hanging around in the reporting pack as “execution loop with iterations” however none of the other reports link to it so you will have to browse to it manually if you want to use it. Please let me know if you ARE using it – I would be very interested to hear about your experiences.   The last change to make you aware of in the execution report is that by default I no longer show OnPreValidate or OnPostValidate messages as I consider them to be superfluous and only serve to clutter up the results. If you want to put them back, well, its open source so go right ahead!   The latest release of SSIS Reporting Pack that contains all of these changes is v0.4 and can be downloaded from http://ssisreportingpack.codeplex.com/releases/view/88178   Feedback on all of the above changes would be very much appreciated. @Jamiet

    Read the article

  • Oracle RightNow CX for Good Customer Experiences

    - by Andreea Vaduva
    Oracle RightNow CX is all about the customer experience, it’s about understanding what drives a good interaction and it’s about delivering a solution which works for our customers and by extension, their customers. One of the early guiding principles of Oracle RightNow was an 8-point strategy to providing good customer experiences. Establish a knowledge foundation Empowering the customer Empower employees Offer multi-channel choice Listen to the customer Design seamless experiences Engage proactively Measure and improve continuously The application suite provides all of the tools necessary to deliver a rewarding, repeatable and measurable relationship between business and customer. The Knowledge Authoring tool provides gap analysis, WYSIWIG editing (and includes HTML rich content for non-developers), multi-level categorisation, permission based publishing and Web self-service publishing. Oracle RightNow Customer Portal, is a complete web application framework that enables businesses to control their own end-user page branding experience, which in turn will allow customers to self-serve. The Contact Centre Experience Designer builds a combination of workspaces, agent scripting and guided assistances into a Desktop Workflow. These present an agent with the tools they need, at the time they need them, providing even the newest and least experienced advisors with consistently accurate and efficient information, whilst guiding them through the complexities of internal business processes. Oracle RightNow provides access points for customers to feedback about specific knowledge articles or about the support site in general. The system will generate ‘incidents’ based on the scoring of the comments submitted. This makes it easy to view and respond to customer feedback. It is vital, more now than ever, not to under-estimate the power of the social web – Facebook, Twitter, YouTube – they have the ability to cause untold amounts of damage to businesses with a single post – witness musician Dave Carroll and his protest song on YouTube, posted in response to poor customer services from an American airline. The first day saw 150,000 views and is currently at 12,011,375. The Times reported that within 4 days of the post, the airline’s stock price fell by 10 percent, which represented a cost to shareholders of $180 million dollars. It is a universally acknowledged fact, that when customers are unhappy, they will not come back, and, generally speaking, it only takes one bad experience to lose a customer. The idea that customer loyalty can be regained by using social media channels was the subject of a 2011 Survey commissioned by RightNow and conducted by Harris Interactive. The survey discovered that 68% of customers who posted a negative review about a holiday on a social networking site received a response from the business. It further found that 33% subsequently posted a positive review and 34% removed the original negative review. Cloud Monitor provides the perfect mechanism for seeing what is being said about a business on public Facebook pages, Twitter or YouTube posts; it allows agents to respond proactively – either by creating an Oracle RightNow incident or by using the same channel as the original post. This leaves step 8 – Measuring and Improving: How does a business know whether it’s doing the right thing? How does it know if its customers are happy? How does it know if its staff are being productive? How does it know if its staff are being effective? Cue Oracle RightNow Analytics – fully integrated across the entire platform – Service, Marketing and Sales – there are in excess of 800 standard reports. If this were not enough, a large proportion of the database has been made available via the administration console, allowing users without any prior database experience to write their own reports, format them and schedule them for e-mail delivery to a distribution list. It handles the complexities of table joins, and allows for the manipulation of data with ease. Oracle RightNow believes strongly in the customer owning their solution, and to provide the best foundation for success, Oracle University can give you the RightNow knowledge and skills you need. This is a selection of the courses offered: RightNow Customer Service Administration Rel 12.02 (3 days) Available as In Class and Live Virtual Class (Release 11.11 is available as In Class, Live Virtual Class and Training On Demand) This course familiarises users with the tasks and concepts needed to configure and maintain their system. RightNow Customer Portal Designer and Contact Center Experience Designer Administration Rel 12.02 (2 days) Available as In Class and Live Virtual Class (Release 11.11 is available as In Class, Live Virtual Class and Training On Demand) This course introduces basic CP structure and how to make changes to the look, feel and behaviour of their self-service pages RightNow Analytics Rel 12.02 (2 days) Available as In Class, Live Virtual Class and Training On Demand (Release 11.11 is available as In Class and Live Virtual Class) This course equips users with the skills necessary to understand data supplied by standard reports and to create custom reports RightNow Integration and Customization For Developers Rel 12.02 (5-days) Available as In Class and Live Virtual Class (Release 11.11 is available as In Class, Live Virtual Class and Training On Demand) This course is for experienced web developers and offers an introduction to Add-In development using the Desktop Add-In Framework and introduces the core knowledge that developers need to begin integrating Oracle RightNow CX with other systems A full list of courses offered can be found on the Oracle University website. For more information and course dates please get in contact with your local Oracle University team. On top of the Service components, the suite also provides marketing tools, complex survey creation and tracking and sales functionality. I’m a fan of the application, and I think I’ve made that clear: It’s completely geared up to providing customers with support at point of need. It can be configured to meet even the most stringent of business requirements. Oracle RightNow is passionate about, and committed to, providing the best customer experience possible. Oracle RightNow CX is the application that makes it possible. About the Author: Sarah Anderson worked for RightNow for 4 years in both in both a consulting and training delivery capacity. She is now a Senior Instructor with Oracle University, delivering the following Oracle RightNow courses: RightNow Customer Service Administration RightNow Analytics RightNow Customer Portal Designer and Contact Center Experience Designer Administration RightNow Marketing and Feedback

    Read the article

  • Application Composer: Exposing Your Customizations in BI Analytics and Reporting

    - by Richard Bingham
    Introduction This article explains in simple terms how to ensure the customizations and extensions you have made to your Fusion Applications are available for use in reporting and analytics. It also includes four embedded demo videos from our YouTube channel (if they don't appear check the browser address bar for a blocking shield icon). If you are new to Business Intelligence consider first reviewing our getting started article, and you can read more about the topic of custom subject areas in the documentation book Extending Sales. There are essentially four sections to this post. First we look at how custom fields added to standard objects are made available for reporting. Secondly we look at creating custom subject areas on the standard objects. Next we consider reporting on custom objects, starting with simple standalone objects, then child custom objects, and finally custom objects with relationships. Finally this article reviews how flexfields are exposed for reporting. Whilst this article applies to both Cloud/SaaS and on-premises deployments, if you are an on-premises developer then you can also use the BI Administration Tool to customize your BI metadata repository (the RPD) and create new subject areas. Whilst this is not covered here you can read more in Chapter 8 of the Extensibility Guide for Developers. Custom Fields on Standard Objects If you add a custom field to your standard object then it's likely you'll want to include it in your reports. This is very simple, since all new fields are instantly available in the "[objectName] Extension" folder in existing subject areas. The following two minute video demonstrates this. Custom Subject Areas for Standard Objects You can create your own subject areas for use in analytics and reporting via Application Composer. An example use-case could be to simplify the seeded subject areas, since they sometimes contain complex data fields and internal values that could confuse business users. One thing to note is that you cannot create subject areas in a sandbox, as it is not supported by BI, so once your custom object is tested and complete you'll need to publish the sandbox before moving forwards. The subject area creation processes is essentially two-fold. Once the request is submitted the ADF artifacts are generated, then secondly the related metadata is sent to the BI presentation server API's to make the updates there. One thing to note is that this second step may take up to ten minutes to complete. Once finished the status of the custom subject area request should show as 'OK' and it is then ready for use. Within the creation processes wizard-like steps there are three concepts worth highlighting: Date Flattening - this feature permits the roll up of reports at various date levels, such as data by week, month, quarter, or year. You simply check the box to enable it for that date field. Measures - these are your own functions that you can build into the custom subject area. They are related to the field data type and include min-max for dates, and sum(), avg(), and count() for  numeric fields. Implicit Facts - used to make the BI metadata join between your object fields and the calculated measure fields. The advice is to choose the most frequently used measure to ensure consistency. This video shows a simple example, where a simplified subject area is created for the customer 'Contact' standard object, picking just a few fields upon which users can then create reports. Custom Objects Custom subject areas support three types of custom objects. First is a simple standalone custom object and for which the same process mentioned above applies. The next is a custom child object created on a standard object parent, and finally a custom object that is related to a parent object - usually through a dynamic choice list. Whilst the steps in each of these last two are mostly the same, there are differences in the way you choose the objects and their fields. This is illustrated in the videos below.The first video shows the process for creating a custom subject area for a simple standalone custom object. This second video demonstrates how to create custom subject areas for custom objects that are of parent:child type, as well as those those with dynamic-choice-list relationships. &lt;span id=&quot;XinhaEditingPostion&quot;&gt;&lt;/span&gt; Flexfields Dynamic and Extensible Flexfields satisfy a similar requirement as custom fields (for Application Composer), with flexfields common across the Fusion Financials, Supply Chain and Procurement, and HCM applications. The basic principle is when you enable and configure your flexfields, in the edit page under each segment region (for both global and context segments) there is a BI Enabled check box. Once this is checked and you've completed your configuration, you run the Scheduled Process job named 'Import Oracle Fusion Data Extensions for Transactional Business Intelligence' to generate and migrate the related BI artifacts and data. This applies for dynamic, key, and extensible flexfields. Of course there is more to consider in terms of how you wish your flexfields to be implemented and exposed in your reports, and details are given in Chapter 4 of the Extending Applications guide.

    Read the article

< Previous Page | 388 389 390 391 392 393 394 395 396 397 398 399  | Next Page >