Search Results

Search found 19009 results on 761 pages for 'network shares'.

Page 392/761 | < Previous Page | 388 389 390 391 392 393 394 395 396 397 398 399  | Next Page >

• Windows server 2008R2 routing with single NIC

  - by Fabian

  I'm trying to duplicate a Linux server configuration to a windows server 2008R2 box. Basicaly this linux server acts as a router, but it is doing its job with only 1 interface (1 NIC). Here is the network configuration in place (I cannot change it) : INTERNET <== Router (local ip = 194.168.0.3) <== linux Server (ip : 194.168.0.2). The router is configured with a DMZ to 194.168.0.2, and only allow this IP to connect to internet (Cannot change this router configuration). The linux server is configured with a default gateway to 194.168.0.3, with the option : "Act as router". All other computer on the lan have this configuration (given by DHCP) : IP range : 194.168.0.X MASK : 255.255.255.0 Default gateway : 194.168.0.2 And everything is working perfectly. I'm trying to reproduce this way of routing with only one NIC from a windows server 2008R2, but it seems that you cannnot do it with only one NIC (all exemples I see are refering to 2 NIC with 2 different network). Does someone have an idea how to achieved this in Windows server 2008R2 ? Tx you for your help ! Fabian.

  Read the article

• Remote management interface for managing ip6tables (or an alternative firewall)

  - by Matthew Iselin

  I'm working with IPv6 and have run into an issue configuring ip6tables on our main router in order to control what can come into the network. A default DROP rule in the FORWARD section has worked well (obviously leaving ESTABLISHED,RELATED as ACCEPT) to keep internal clients' open ports from being accessed. However, running an ip6tables command for every little change is unwieldy. Whilst we are able to continue creating rules manually, I'm wondering if there's some sort of management interface we could use to create the rules quickly and easily. We're looking to be able to save time working on our firewall as well as providing a simple method for modifying rules for those who will eventually replace us. I know webmin (heavily locked down on our network, naturally) has support for modifying iptables rules, but seemingly no support for ip6tables. Something similar would be fantastic. Alternatively, suggestions for a firewall solution apart from iptables/ip6tables which can be managed remotely wouldn't be out of order. A web interface for management is certainly preferable, even if it is just a wrapper with shiny buttons over the raw config files.

  Read the article

• server and user directly connected no pinging...

  - by jtzero

  I have a server(fedora 12) with two nics on it, directly connected to say 192.168.1.0 and 192.168.2.0 the route table looks like this Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.1.0 192.168.1.1 255.255.255.0 U 0 0 0 eth0 192.168.2.0 * 255.255.255.0 U 0 0 0 eth1 eth0 = 192.168.1.15 eth1 = 192.168.2.1 and a directly connected user (Mythdora) on the 192.168.2.0 network with ip 192.168.2.2 and route table like so Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.2.0 * 255.255.255.0 U 0 0 0 eth0 the cable is a crossover and it works all three nics work -- connected my laptop to either end and assign it a valid 192.168.2.0 ip the pings will work. In fact if I disconnect the server side and plug the eth cable into the laptop and have thte box ping the laptop continually remove the eth cable and plug it back into the server both sides ping... unfortunately the box realizing it's connected to a different pc wipes its route table after say ten minutes or so. if I do a trace route from a box on the 1.0 network to the servers 192.168.2.1 interface never get a reply from it. as a note at one point I could ping the server from the 192.168.2.2 box but the server couldnt ping the 192.168.2.2 box.

  Read the article

• OpenVPN with MacOS X Client and same subnets in local and remote net.

  - by Daniel

  I have a homenetwork 192.168.1.0/24 with gteway 192.168.1.1 and a remote network with the same parameters. Now I want to create a OpenVPN tunnel between those networks. I have no problems with Windows, because Windows routes everything to 192.168.1.0/24 except 192.168.1.1 throught the tunnel. On MacOS X however I see the folling line in the Details window: 2010-05-10 09:13:01 WARNING: potential route subnet conflict between local LAN [192.168.1.0/255.255.255.0] and remote VPN [192.168.1.0/255.255.255.0] When I list the routes I get the following: Internet: Destination Gateway Flags Refs Use Netif Expire default 192.168.1.1 UGSc 13 3 en1 127 localhost UCS 0 0 lo0 localhost localhost UH 12 3589 lo0 169.254 link#5 UCS 0 0 en1 192.168.1 link#5 UCS 1 0 en1 192.168.1.1 0:1e:e5:f4:ec:7f UHLW 13 17 en1 1103 192.168.1.101 localhost UHS 0 0 lo0 192.168.6 192.168.6.5 UGSc 0 0 tun0 192.168.6.5 192.168.6.6 UH 1 0 tun0 My Interfaces are en1 - My local Wifi network tun0 - The tunnel interface As can be seen from the routes above there is no entry for 192.168.1.0/24 that routes the traffic through the tunnel interface. When I manually route a single IP like 192.168.1.16 over the tunnel gateway 192.168.6.6, this works. Q: How do I set up my routes in MacOS X for the same behaviour as on windows, to route everything except 192.168.1.1 through the tunnel, but leave the default gateway to be my local 192.168.1.1 ?

  Read the article

• SSH works in putty but not terminal

  - by Ryan Naddy

  When I try to ssh this in a terminal: ssh [email protected] I get the following error: Connection closed by 69.163.227.82 When I use putty, I am able to connect to the server. Why is this happening, and how can I get this to work in a terminal? ssh -v [email protected] OpenSSH_6.0p1 (CentrifyDC build 5.1.0-472) (CentrifyDC build 5.1.0-472), OpenSSL 0.9.8w 23 Apr 2012 debug1: Reading configuration data /etc/centrifydc/ssh/ssh_config debug1: /etc/centrifydc/ssh/ssh_config line 52: Applying options for * debug1: Connecting to sub.domain.com [69.163.227.82] port 22. debug1: Connection established. debug1: identity file /home/ryannaddy/.ssh/id_rsa type -1 debug1: identity file /home/ryannaddy/.ssh/id_rsa-cert type -1 debug1: identity file /home/ryannaddy/.ssh/id_dsa type -1 debug1: identity file /home/ryannaddy/.ssh/id_dsa-cert type -1 debug1: identity file /home/ryannaddy/.ssh/id_ecdsa type -1 debug1: identity file /home/ryannaddy/.ssh/id_ecdsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.1p1 Debian-5 debug1: match: OpenSSH_5.1p1 Debian-5 pat OpenSSH_5* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_6.0 debug1: Miscellaneous failure Cannot resolve network address for KDC in requested realm debug1: Miscellaneous failure Cannot resolve network address for KDC in requested realm debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP Connection closed by 69.163.227.82

  Read the article

• IPSec VPN using ZyWALL IPSec VPN Client: unable to connect from some providers

  - by Reshi

  I'm trying to configure an IPSec VPN to one company from my home. The company has SANET internet service provider. I was able to create a VPN connection from another company that has the same internet service provider. The problem begins when I'm trying to connect from another ISP like Orange or Telekom. Here is the log from ZyWall: 20120816 10:06:18:359 Default (SA Gateway-P1) SEND phase 1 Main Mode [SA] [VID] [VID] [VID] [VID] [VID] 20120816 10:06:18:375 Default (SA Gateway-P1) RECV phase 1 Main Mode [SA] [VID] [VID] [VID] [VID] [VID] [VID] [VID] [VID] 20120816 10:06:18:390 Default (SA Gateway-P1) SEND phase 1 Main Mode [KEY_EXCH] [NONCE] [NAT_D] [NAT_D] 20120816 10:06:18:718 Default (SA Gateway-P1) RECV phase 1 Main Mode [KEY_EXCH] [NONCE] [NAT_D] [NAT_D] 20120816 10:06:18:734 Default (SA Gateway-P1) SEND phase 1 Main Mode [HASH] [ID] 20120816 10:06:18:750 Default (SA Gateway-P1) RECV phase 1 Main Mode [HASH] [ID] 20120816 10:06:18:750 Default phase 1 done: initiator id [email protected], responder id 111.112.113.114 20120816 10:06:18:765 Default (SA Gateway-Tunnel-P2) SEND phase 2 Quick Mode [HASH] [SA] [KEY_EXCH] [NONCE] [ID] [ID] 20120816 10:06:18:953 Default (SA Gateway-Tunnel-P2) RECV phase 2 Quick Mode [HASH] [SA] [KEY_EXCH] [NONCE] [ID] [ID] 20120816 10:06:18:953 Default (SA Gateway-Tunnel-P2) SEND phase 2 Quick Mode [HASH] 20120816 10:06:48:968 Default (SA Gateway-P1) SEND Informational [HASH] [NOTIFY] type DPD_R_U_THERE 20120816 10:06:48:984 Default (SA Gateway-P1) RECV Informational [HASH] [NOTIFY] type DPD_R_U_THERE_ACK ZyWall informs me that the tunnel was opened. But I can't ping or access any computer in the network. My configuration at home: ISP: Orange Optical connection Terminal: GPON OPTICAL NETWORK TERMINAL G-25E Router: TPLink TL-WR941N --> SPI Firewall Enabled --> VPN - IPSEC Passthrough Enabled I was wondering if the problem could not be on ISP side (that he blocks somehow this connection because in SANET ISP it worked fine) or even in my terminal or router. What could I check? Where could be the problem ?

  Read the article

• Using OSX home directories from linux

  - by Steffen

  I'm running an OSX (Snow Leopard) Server with OpenDirectory, which is nothing else than a modified OpenLDAP with some Apple-specific schemas. However, I want to reuse this directory on some of my Linux (Debian Squeeze) boxes. It's no problem to authenticate against OSXs LDAP Server, this works fine already. What I struggle with is the way the home folders are specified in OSX. If I query the passwd config on one of my linux machines, the OSX imported entries are looking like this myaccount:x:1034:1026:Firstname Lastname:/Network/Servers/hostname.example.com/Volumes/MyShare/Users/myaccount:/bin/bash While those network home folders might be fine for OSX-Clients, I don't want those server based paths on my linux machines. I saw that there is an NFSHomeDirectory Attribute in the OSX User inspector, but if I change this the whole user home path gets changed. Since my users should be able to login on both systems, OSX and Linux, this is not what I want. Does anyone have an idea how I must configure OSX to make my linux machines use home folders like /net/myaccount and leave the configuration for OSX clients untouched?

  Read the article

• OpenVPN IPV6 Tunnel Radvd

  - by Arenstar

  Hello.. I have an interesting question regarding ipv6 + openvpn.. My Version is OpenVPN 2.1.1 i have been given a native /64 ipv6 network ( for this example 2001:acb:132:acb::/64 ) The plan was/is, route this block through openvpn and into an office ( for testing purposes ) Soo to explain.. I have a Centos Box as the first linux "router" in a datacenter & a Ubuntu box as the second linux "router" in the office I have created a simple point-to-point tunnel using tun ( based off ipv4 address to start the tunnel ) I have assigned to Centos /sbin/ip addr add fed1::1/128 dev eth0 /sbin/ip addr add fed2::2/128 dev tun0 /sbin/ip route add 2001:acb:132:acb::/64 dev tun0 ## ipv6 Block down the tunnel /sbin/ip route add ::/0 dev eth0 ## Default out to Gateway I have assigned to Ubuntu /sbin/ip addr add fed1::3/128 dev tun0 /sbin/ip addr add fed1::4/128 dev eth0 /sbin/ip route add 2001:acb:132:acb::/64 dev eth0 ## ipv6 Block down to eth0 /sbin/ip route add ::/0 dev tun0 ## Default up the tunnel I have also included on both servers.. sysctl -w net.inet6.ip6.forwarding=1 Looks Good... right??? Wrong.. :( I am not able to ping fed1::1 from fed1::4 (Ubuntu) (can ping :4,:3,:2) However, i can ping fed1::1 fed1::2 from :3 ?????? ( very strange ) I am able to access the internet from any ipv6 interface on the Centos Box but clearly not from the Ubuntu box.. Further, i will eventually run radvd on the Ubuntu box eth0, and autoconf the network with ipv6 address's Anyone with some advice / tips to help me out.. ??? Cheers

  Read the article

• Hyper-v on 2012R2 startup gen1 vm causes the host to freeze up

  - by sputnik

  I've searched a lot to resolve the following issue, but nothing helped me. My problem is, that starting up a first-gen vm locks up the whole host. Only a hard reset helps. Second-gen vm starts and runs perfectly. The freezes happened on 3 different vms. FreeBSD, Ubuntu, Windows Server 2008R2, while Windows 8.1 on second gen config works perfectly. Im using this pc mainly as a workstation. No eventlog errors nor dumps are generated. My system: Windows Server 2012R2 FX-8350, non OC ASRock 870 Extreme R2 (Crappy board imho) 32GB DDR3 1866@1600 (My motherboard, against the "support" for 1866ram won't work with full speed) 120GB SSD 4.5TB Storage space device I dont think that its due to my system, because vmware workstation was running without problems. Did I forget to configure something? Any help is appreciated. P.S: Even deactivating C1E, C6, C&Q didnt work. P.P.S: With no virtual network adapter set, the system still locks up. Creating a first gen vm without any hdds and network and launching works. Attaching a boot dvd causes the host to freeze. The host freezes as the gen1 vm begins to boot, doesn't matter if from dvd or hdd

  Read the article

• Office 2010 Trusted Locations not working after restart

  - by Josh King

  In Excel 2010, on Windows XP, I am unable to open files - through the open dialog box - from a network drive. The sever has already been added to the Trusted Locations and now most security settings turned down or off. Excel will show "Downloading ..." on that status bar and a progress bar which doesn't progress. We have left Excel sitting in this state for 30+ minutes and no change. A similar problem occurs when saving files to network shares. If we use explorer to navigate to the files and double click them they open flawlessly. No add-ins are active. We also have this problem in Word 2010, but the server was not initially in the Trusted Locations. I added it and it worked until the PC was reset, it now exhibits the same issues as Excel where the server is in the Trusted locations but will not open files. I have tried removing the server from the Trusted Location in both applications, restarting the PC and re-adding them (testing before, after and in-between) and had no luck.

  Read the article

• Bridging Wireless and Wired Interfaces in Linux

  - by The Daemons Advocate

  My network setup is something like: Wireless Router <---> Netbook <---> Ubuntu Desktop ...or, more verbosely (with interfaces): Wireless Router <--(wireless)--> (eth2) Ubuntu Netbook Ubuntu Netbook (eth0) <---(wired)----> (eth0) Ubuntu Desktop In a perfect world, I'd have the desktop wired, but weird circumstances combined with my wanting to understand more about networking in linux make me want to figure out how to bridge these two devices. A bit of googling has given me this example using bridge-utils, and here's how I'm (failing) to setup the bridge (on the netbook): sudo -i ifconfig eth0 0.0.0.0 ifconfig eth2 0.0.0.0 brctl addbr bridget brctl addif bridget eth0 brctl addif bridget eth2 ifconfig bridget up ...then, trying to make sure that the netbook can still get on the internets... route add default gateway 192.168.2.1 dhclient bridget What happens after this is that the dhclient command above (netbook) doesn't get served an IP, and the Desktop, if I run dhclient, it doesn't get served an IP. Some weird considerations might be that I'm running the Network Manager Applet that comes with Ubuntu. While I'm sure I can get a command line wireless configuration setup, it's a bit complex. Can someone give me a shout as to where I'm going wrong? I'd also like to note another related question titled 'Bridging my laptop’s wireless and wired adaptors', however the setup is different to mine.

  Read the article

• How do I ensure a process is running, even if it kills itself? (it needs to be restarted then)

  - by le_me

  I'm using linux. I want a process (an irc bot) to run every time I start the computer. But I've got a problem: The network is bad and it disconnects often, so I need to manually restart the bot a few times a day. How do I automate that? Additional information: The bot creates a pid file, called bot.pid The bot reconnects itself, but only a few times. The network is too bad, so the bot kills itself sometimes because it gets no response. What I do currently (aka my approach ;) ) I have a cron job executing startbot.rb every 5 minutes. (The script itself is in the same directory as the bot) The script: #!/usr/bin/ruby require 'fileutils' if File.exists?(File.expand_path('tmp/bot.pid')) @pid = File.read(File.expand_path('tmp/bot.pid')).chomp!.to_i begin raise "ouch" if Process.kill(0, @pid) != 1 rescue puts "Removing abandoned pid file" FileUtils.rm(File.expand_path('tmp/bot.pid')) puts "Starting the bot!" Kernel.exec(File.expand_path('./bot.rb')) else puts "Bot up and running!" end else puts "Starting the bot!" Kernel.exec(File.expand_path('./bot.rb')) end What this does: It checks if the pid file exists, if that's true it checks if kill -s 0 BOT_PID == 1 (if the bot's running) and starts the bot if one of the two checks fail/are not true. My approach seems to be quite dirty so how do I do it better?

  Read the article

• Unable to browse to apache service, Service is running

  - by Jeff

  Summary I have a very peculiar problem. I am not able to open the "It Works!" page after installing a fresh server with apache. I am able to ssh to the box (from outside the network). Apache seems to be running on my Centos6.4x86_64 box just fine. Nothing useful in /var/logs/httpd/*. What am I missing? The setup I am outside the network right now. The "server" is a VM on my home computer running bridged mode. public ip: A.B.C.D Host: 192.168.1.5 VM: 192.168.1.8 I have a verizon fios router that is forwarding ports 22, 80, and 8888 to the VM. I am able to ssh over port 22, but I am not able to browse to the public URL over port 80. so A.B.C.D:22 is working, but http://A.B.C.D:80 is not. What I've tried nmap to see if it is listening: nmap -sT -O localhost Starting Nmap 5.51 ( http://nmap.org ) at 2013-10-25 11:10 EDT Nmap scan report for localhost (127.0.0.1) Host is up (0.000040s latency). Other addresses for localhost (not scanned): 127.0.0.1 Not shown: 996 closed ports PORT STATE SERVICE 22/tcp open ssh 25/tcp open smtp 80/tcp open http 3306/tcp open mysql I tried going to it locally (lynx) and it does work. So, is the problem in my ports?

  Read the article

• In an environment with multiple WiFi access points, do wireless clients sometimes connect to both at the same time?

  - by Bobby Burgess

  This is more of a curiosity than a problem, but in this new office I have two D-link DAP-2553's connected in a master/slave array (this just means the master keeps certain configuration options aligned with the slave). The network is set to 802.11n-only, and each AP has the same SSID and WPA2 key. The only difference is that they are on different channels (1 and 11). The WiFi network itself is working well. Users can roam around and the signal/speed is fairly consistent. However, I notice that when I look at the 802.11 client list in the web admin page for each of the 2 APs, I see that certain clients are connected to both, for extended periods of time, but I assume they are only passing data through one of them. Not every client is seen on each AP, but at any given time the same MAC address of a WiFi adapter can be associated (and remain associated) with both APs. The client list auto-refreshes every few seconds so I believe I'm looking at the most recent rather than stale information. One of the WiFi adapters that consistently associates with both APs is an Intel Centrino Wireless-N 1030 (laptop chip). Is it part of the WiFi standard that more than one association per WiFi card can be established concurrently on separate APS?

  Read the article

• How to connect a USB GDI printer to Linux over a D-Link print server?

  - by jpe

  The setup is the following: +------------+ +-----------------+ +---------+ | HP LJ P1005|--USB--| D-Link DPR-1020 |---LAN---| PC Linux| +------------+ +-----------------+ + +---------+ | +------------+ +--| PC Windows | +------------+ HP LJ P1005 is one of those GDI printers that requires the printer driver to do most of the work for it and therefore is a bit "special". D-Link DPR-1020 is a print server with an Ethernet and an USB port that actually supports printing to challenged (read GDI) printers using a utility called PS-Link. What the utility does is basically mirror a USB port over the network to the print server so that the printer driver and the printer both are happy to talk to each other. The PC-s are notebooks that come and go, i.e. are not there all the time. Is there an equivalent of the D-Link PS-Link utility for Linux that could mirror a USB port over the network for a Linux host? And can the solution be used with D-Link DPR-1020? If not then I basically wasted the money buying the print server because the goal was to share a small printer among a couple of users with diverse operating systems in an office. The print server specs say that it supports Linux and LJ P1005, but the Catch 22 appears to be the solution used for GDI printers... It should be noted that it is possible to print from Linux to LJ P1005 directly over USB. This far sharing involved reconnecting the USB cable to appropriate computer to print. Now one of the desks is separated, so the cable does not work. Searching the net did not yield anything useful. Please do not suggest solutions involving a Windows machine (either virtual or not), my question is whether a solution only involving a Linux machine exists.

  Read the article

• How to set up port forwarding on a dedicated server running CentOS 5.4 to use Ubuntu 9.0.4

  - by mairtinh

  The basic situation that I have is a dedicated server running CentOS 5.4 At the moment I have one VM running Ubuntu 9.0.4. Later on, I will want to add another VM running Windows Server 2003 but at the moment I am focusing on getting Ubuntu up and running. The Ubuntu installation is working fine but I'm seriously struggling to get port forwarding working so that I can access websites to be hosted on the Ubuntu VM. As a newbie to Linux, I am confused about the relationship between IPTables and VMWare's own port forwarding. Here's what I've tried so far. The IP of my server is xxx.xxx.xxx.xxx and the provider support have told me that the subnet mask is 255.255.255.0, the gateway address is xxx.xxx.xxx.1 and the network address is xxx.xxx.xxx.0. (Those latter two surprise me a bit, I expected private gateway/network address rather than public ones.) First of all I tried Bridged Networking but had no success at all in communicating with the machine other than through the VMware console. I tried pinging it from the host (using ssh into the host) but no joy; also no Inernet access from the VM. I changed the interfaces configuration from DHCP to Static, using a static address of 192.168.1.100 and setting the gateway to xxx.xxx.xxx.1 as advised by the provider. No real difference, still cannot ping the guest from the host or vice versa and no Internet access from the guest. Then I tried NAT. The host automatically set the IP address to 192.168.132.128 with a gateway of 192.168.132.2 Now the guest has Internet access out and when I do a VNC to the host and open Firefox with 192.168.132.128 I can see the hosted website okay but I still cannot get into it from outside. I mentioned that I'm a bit confused about IPtables and VMware port forwarding, what I meant is that I'm not sure whether IPtable forwarding should be set to the IP address of the guest interface (192.168.132.128 in this case) or the gateway address 192.168.132.2 . I have a feeling that I'm missing something very simple here, can anybody tell me what it is?

  Read the article

• How can I cause Task Scheduler to "fail" if a dialog box returns a certain result?

  - by Roger

  I'm working on a VBScript to do a weekly reboot of all machines on our network. I want to run this script via Task Scheduler. The script runs at 3:00 AM, but there is a small chance that users may still be on the network at that time, and I need to give them the option to terminate the reboot. If they do so, I would like the reboot to occur the next night at 3:00 AM. I've set Task Scheduler up to repeat in this way. So far, so good. The problem is that if the user selects "Cancel" in my script, the Task Scheduler does not see my task as failed, and won't run it again the next night. Any ideas? Can I pass an errorcode to task scheduler or otherwise abort the task via VBScript? My code is below: Option Explicit Dim objShell, intShutdown Dim strShutdown, strAbort ' -r = restart, -t 600 = 10 minutes, -f = force programs to close strShutdown = "shutdown.exe -r -t 600 -f" set objShell = CreateObject("WScript.Shell") objShell.Run strShutdown, 0, false 'go to sleep so message box appears on top WScript.Sleep 100 ' Input Box to abort shutdown intShutdown = (MsgBox("Computer will restart in 10 minutes. Do you want to cancel computer restart?",vbYesNo+vbExclamation+vbApplicationModal,"Cancel Restart")) If intShutdown = vbYes Then ' Abort Shutdown strAbort = "shutdown.exe -a" set objShell = CreateObject("WScript.Shell") objShell.Run strAbort, 0, false End if Wscript.Quit Appreciate any thoughts.

  Read the article

• Remote SQL server connection failure

  - by Sevki

  I am trying to connect to my MSSQL server 2008 web instance and im failing horribly... i get the error 26 and before you jump on me i have done these Check the spelling of the SQL Server instance name that is specified in the connection string. Use the SQL Server Surface Area Configuration tool to enable SQL Server to accept remote connections over the TCP or named pipes protocols. For more information about the SQL Server Surface Area Configuration Tool, see Surface Area Configuration for Services and Connections. Make sure that you have configured the firewall on the server instance of SQL Server to open ports for SQL Server and the SQL Server Browser port (UDP 1434). Make sure that the SQL Server Browser service is started on the server. in addition to theese i have disabled the firewall completely and tried other ports nothing works the same credentials work on the server but not on the client. this is the exact error message A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (.Net SqlClient Data Provider) Can anybody help?

  Read the article

• Overriding some DNS entries in BIND for internal networks

  - by Remy Blank

  I have an internal network with a DNS server running BIND, connected to the internet through a single gateway. My domain "example.com" is managed by an external DNS provider. Some of the entries in that domain, say "host1.example.com" and "host2.example.com", as well as the top-level entry "example.com", point to the public IP address of the gateway. I would like hosts located on the internal network to resolve "host1.example.com", "host2.example.com" and "example.com" to internal IP addresses instead of that of the gateway. Other hosts like "otherhost.example.com" should still be resolved by the external DNS provider. I have succeeded in doing that for the host1 and host2 entries, by defining two single-entry zones in BIND for "host1.example.com" and "host2.example.com". However, if I add a zone for "example.com", all queries for that domain are resolved by my local DNS server, and e.g. querying "otherhost.example.com" results in an error. Is it possible to configure BIND to override only some entries of a domain, and to resolve the rest recursively?

  Read the article

• VLAN Through Switch Doesn't Work

  - by vcsjones

  I have the following scenario: I have a Cisco Aironet 1040 access point. I have it configured with two SSIDs, each going to a different VLAN. So: SSID internal : VLAN 90 SSID guest : VLAN 70 On the router side, I have a Cisco RV220W (with the radios now turned off) and have setup VLANs with like VLAN IDs. VLAN 90 : 192.168.90.0/24 VLAN 70 : 192.168.70.0/24 As far as DHCP is concerned, each VLAN has a "DHCP Server" in the router's configuration: So with the access point connected directly to the router, everything works great. I connect to the internal network, and I get a 192.168.90.x address, and the guest network gets a 70.xxx address. Next I introduced a Cisco SG200-50 PoE switch between the router and the access point. The port is configured as a trunk port, so the VLAN tags should go right through the switch back to the router. However, when something is connected to the access point, nothing works. It isn't able to get an IP address, and manually assigning one doesn't seem to let any traffic route. Given that the access point works correctly when connected to the router directly, I believe the switch is misconfigured. What am I missing here? What can I use to better diagnose what the problem might be? It's small business equipment, so CLI access is not available. Below are screenshots of the switch's config. The access point is connected to GE2.

  Read the article

• WebDav System Error 67 in Windows XP

  - by Nixphoe

  Issue: I'm having issues getting WebDav to work in the command line on Windows XP, both Service Pack 2 and Service Pack 3. C:\>net use z: https://mywebsite.com/software/ System error 67 has occurred. The network name cannot be found. I have tested this with two webdav server. Both Ubuntu Apache and I Windows Server 2003 IIS. Both get the same result. Things That Haven't Worked: I've installed the following Microsoft KB on my XP machines with no avail. I've also found the following reg key: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\WebClient\Parameters UseBasicAuth REG_DWORD 1 I try the following when trying to use a few work around I've dug up on the web, all producing the same result. net use z: https://mywebsite.com/software net use z: https://mywebsite.com/software# net use z: https://mywebsite.com/software/ net use z: https://mywebsite.com/software/# I've also tried all the above combinations adding a user into it /user:user and /user:user@domain. I've also tried using http:// rather than https://. I've tried "\\server.com@ssl:443\folder" I've gone over networking related issues as @WesleyDavid had pointed out. Things that do work: I can connect to the webdav folder via the URL and with mapping in Network Place, with XP. But the command line doesn't work (I need a drive letter). Windows 7 works perfectly with the same command. My Delemma: I need this to work with a drive letter. What else can I try to get this working?

  Read the article

• Windows 7 fails to connect to the internet a few minutes after startup

  - by SageTheGreat

  Problem Earlier today, when I turned on my desktop computer, my internet connection works fine. Cryptocurrency miners connecting and hashing as usual and I can browse websites. But after a few minutes, my miner fails indicating that there is something wrong with my internet connection. Tried refreshing my browser and is stuck at "resolving host", and then presented me an error. After that, i can't browse sites anymore. But the weird thing is that the network icon in Windows 7 shows no signs of problems. Solutions Made Restarted my computer without doing anything: Problem persists. Tried using the network troubleshooter of windows: Reported no problems Stopped bonjour still no progress. Loaded windows using Last good config: still no progress. Restarted Modem: No change. Current Status I currently did a system restore to my system to a point before installing the latest update from Microsoft. Because earlier today, I installed some updates and after that, the problem started to appear. (After system restore, same problem.) Latest Programs installed before the problem MS Visual Studio 2013 (but internet still worked fine after the install). I hope someone could provide answers on this problem. It is my first time encountering this. EDIT: Additional Info OS: Windows 7 SP1 64-bit AV: Avast Free Antivirus Internet Connection Type: Ethernet It appears that my Laptop can't even connect to the machine thru Remote Desktop My laptop and phone on WiFi works fine and can connect to the internet. EDIT 2: Whenever I boot into Safe Mode, my Internet is fine.

  Read the article

• Get Internal IP Address From DHCP Hostname

  - by ell

  I would like to try and get an internal ip address of one of the computers on my network. The reason for this is I have a little home server box downstairs but every time I want to SSH into it I have to open my router configuration and go on the DHCP client table and look at the IP address. For example I would like to be able to go ssh ell-sever instead of ssh 192.168.1.105 or whatever it happens to be. My network configuration is like so: Router downstairs that is connected to the Internet and is running a DHCP server My server computer (ell-server) is a headless pc connected to the router via ethernet cable. Running Ubuntu 11.04 Server Edition My laptop upstairs (ell-laptop) that is running Ubuntu 11.10 Desktop Edition connected wirelessly Other (irrelevant) computers - 2 x Windows XP, 1 x Xubuntu - all connected with cables. (It seemed to me the method of connection isn't useful information but I put it in anyway - just in case. If I have missed any information please tell me) Do I have to run a DNS server on one of my computers? If so which one? And does that mean I will have to run a DDNS client on each computer? Thanks in advance, ell.

  Read the article

• How do I load balance between two Linux machines?

  - by William Hilsum

  Inspired by the Stack Overflow network, I am now obsessed with HAProxy and trying to use it myself. At the moment, each HAProxy box has got two network cards (well, two configured, I can have a maximum of 4 and wasn't sure if they needed their own one for management between the boxes). On both machines, the backend one (eth1) is a private IP that goes to a switch connected to the webservers, and the front facing one (eth0) has a public internet IP that is routed straight though. In addition, I have created an additional virtual ip for eth0 called eth0:0 which has got a third public ip address. I just about get how to use it for load balancing between multiple web servers that are behind it, but, I am failing to load balance between the two HAProxy boxes - they appear to fight for the virtual IP, but, this does not appear to be a smart solution. Now, by using the virtual shared IP address, this solution appears to work and does seem to give me maximum uptime, but, is this the correct way to do it, or is there a smarter way? I have been looking at other Linux packages such as keepalived, but, I have only been using Linux (server) for a week now and am at the limits of my understanding. Is there anyone who has done this before and can you advise anything for maximum uptime?

  Read the article

• LDAP, Active Directory and bears, oh my!

  - by Tim Post

  What I have: Workstations running Ubuntu Jaunty mounting /home on a remote NFS server. User accounts are still created locally on each individual workstation. Workstations running Windows XP / Vista NFS server (as noted above) Windows 2008 server All machines share a single private network (LAN). What I need to accomplish: A single, intuitive (GUI driven) place for an office administrator to create user accounts. This should let anyone login to their (linux or windows) workstation, then fire up remote desktop and use the same login to the Windows 2008 server, from any machine on the network. I have read so much on samba, LDAP vs AD, etc and now I'm even more confused than I was before I began researching the problem. Ideally, Linux and Windows users should be able to get to their local files once logged into the Win2008 server. I am a programmer, not an interoperability guru and I'm completely lost on where to even start trying to accomplish this, plus I've run out of things to Google. How would you do this? Is it even possible?

  Read the article

< Previous Page | 388 389 390 391 392 393 394 395 396 397 398 399  | Next Page >