Search Results

Search found 12676 results on 508 pages for 'virtual directories'.

Page 392/508 | < Previous Page | 388 389 390 391 392 393 394 395 396 397 398 399  | Next Page >

• Document management, SCM ?

  - by tsunade

  Hello, This might not be a hard core programming question, but it's related to some of the tools used by programmers I suspect. So we're a bunch of people each with a bunch of documents and a bunch of different computers on a bunch of operating systems (well, only 2, linux and windows). The best way these documents can be stored/managed is if they were available offline (the laptop might not always be online) but also synchronized between all the machines. Having a server with extra reliable storage be a "base repository" seems like a good idea to me. Using a SCM comes to my mind and I've tried Subversion, and it seems to be a good thing that it uses a centralized repository - but: When checking out the total size of the checkout is roughly double the original size. Big files or big repositories seem to slow it down. Also I've tried rsync, which might work - but it's a bit rough when it comes to the potential conflict. Finally I've tried Unison (which is a wrapping of rsync, I think) and while it works it becomes horribly slow for the big directories we have here since it has to scan everything. So the question is - is there a SCM tool out there that is actually practial to use for a big bunch of both small and big files? If thats a NO - does anyone know other tools that do this job? Thanks for reading :)

  Read the article

• Netbeans 6.1 Incorrect CVS Status on a file that does not exist

  - by Coder

  Hi, I have been trying to figure this out for a few hours off and on now and can't figure it out. I committed a lot of binary (jar files) to cvs and they worked fine, but one of the 6 directories, netbeans thinks has a file that it keeps trying to commit, but it doesn't actually exist in the file system. There is also another file in the same directory that i did commit, and netbeans cvs status says that it's an unknown file, but when i delete the directory and check it out, it shows up fine, but netbeans can't get the correct cvs status for the file. I looked in the repository and all looks fine. There is only one file present as it should be. Looking at the CVS directory in the checkout folder also reveals nothing suspicious. I don't know what to do about this. I don't know why netbeans thinks there is a file in that directory that is not actually there. I did a search in my working directory and my netbeans project directory for any file containing a reference to this file but there is nothing.

  Read the article

• What's the best Linux backup solution?

  - by Jon Bright

  We have a four Linux boxes (all running Debian or Ubuntu) on our office network. None of these boxes are especially critical and they're all using RAID. To date, I've therefore been doing backups of the boxes by having a cron job upload tarballs containing the contents of /etc, MySQL dumps and other such changing, non-packaged data to a box at our geographically separate hosting centre. I've realised, however that the tarballs are sufficient to rebuild from, but it's certainly not a painless process to do so (I recently tried this out as part of a hardware upgrade of one of the boxes) long-term, the process isn't sustainable. Each of the boxes is currently producing a tarball of a couple of hundred MB each day, 99% of which is the same as the previous day partly due to the size issue, the backup process requires more manual intervention than I want (to find whatever 5GB file is inflating the size of the tarball and kill it) again due to the size issue, I'm leaving stuff out which it would be nice to include - the contents of users' home directories, for example. There's almost nothing of value there that isn't in source control (and these aren't our main dev boxes), but it would be nice to keep them anyway. there must be a better way So, my question is, how should I be doing this properly? The requirements are: needs to be an offsite backup (one of the main things I'm doing here is protecting against fire/whatever) should require as little manual intervention as possible (I'm lazy, and box-herding isn't my main job) should continue to scale with a couple more boxes, slightly more data, etc. preferably free/open source (cost isn't the issue, but especially for backups, openness seems like a good thing) an option to produce some kind of DVD/Blu-Ray/whatever backup from time to time wouldn't be bad My first thought was that this kind of incremental backup was what tar was created for - create a tar file once each month, add incrementally to it. rsync results to remote box. But others probably have better suggestions.

  Read the article

• Tagging in Subversion - how do I make the decision about continuing to work on my trunk vs. the new

  - by Howiecamp

  I'm running Tortoise SVN to manage a project. Obviously the principles around tagging apply to any implementation of SVN but in this question I'll be referring to some TortoiseSVN-specific dialog boxes and messages. My working directory and the subversion repository structure both have a Source root directory and the Trunk, Tags and Branches directories underneath. (I couldn't figure out how to do a multilevel indented hierarchy in markdown without using bullets, so if someone could edit and fix this I'd appreciate it.) I'm working out of the Trunk directory in my working copy and it's pointing at the Trunk directory in the repo. I want to apply a Tag "Release1" so I click the "Branch/tag..." menu option and set the repo path as my [repo_path/bla/Source/Tags/Release1" tag. This dialog box gives me the option to "Switch my working copy to new branch/tag". I understand that if this option is left unchecked, the new "Release1" branch under /Tags" will be created but my working copy will remain on the previous "Trunk" path. If I do check this option (or use the Switch command) I understand that my working copy will switch to the new "Release1" branch under "/Tags". Where I'm missing a concept is how to make this decision. It doesn't seem like I want to switch my working directory to the recently created tag since by definition (?) I want that tag to be a snapshot of my code as of a point in time. If I don't switch the working directory, I'll continue working off Trunk and when I'm ready to take another snapshot I'll make another tag. And so on... Am I understanding this right or am I stating something incorrectly in the previous paragraph (e.g. the statement about not wanting to switch to the tag since the tag should represent a point in time snapshot) or otherwise missing something regarding how to make this decision?

  Read the article

• Bookmarklet, js injection and popup issue

  - by Neewok

  I'm currently writing a bookmarklet that loads and executes a remote js file by appending a new <script> tag in the current window, like so : javascript:(function() { if(typeof __bml_main != "undefined") return __bml_main.init(); var s= document.createElement('script'); s.type= 'text/javascript'; s.src= 'http://127.0.0.1:8000/media/bookmarklet.js'; void(document.body.appendChild(s)); })(); My bookmarklet needs to perform some dom manipulations in order to extract data from the page being viewed, and then to open a new popup to list them. The thing is : if I want to bypass pop-up blockers, I can't open my new window from the injected script. I need to open it right from the beginning in the bookmarklet code, and to access it later when needed. I've tried to do somehting like this : javascript:var my_popup = window.open('http://127.0.0.1:8000/resources/manage/new/', 'newResourcePopup',config='height=200,width=400,toolbar=no,menubar=no,scrollbars=no,resizable=no,location=no,directories=no,status=no'); (function() { // script injection (...) })(); but if I then try to access my_popup from my remotely loaded script, most browsers will throw a security warning and won't let me access the Window object. This is understandable since the script is not from the same domain than the displayed page, but I'm kind of stuck... A solution would be to use a div overlay, but I'd really prefer to open a window in this case. Any hints ?

  Read the article

• Reasonably faster way to traverse a directory tree in Python?

  - by Sridhar Ratnakumar

  Assuming that the given directory tree is of reasonable size: say an open source project like Twisted or Python, what is the fastest way to traverse and iterate over the absolute path of all files/directories inside that directory? I want to do this from within Python (subprocess is allowed). os.path.walk is slow. So I tried ls -lR and tree -fi. For a project with about 8337 files (including tmp, pyc, test, .svn files): $ time tree -fi > /dev/null real 0m0.170s user 0m0.044s sys 0m0.123s $ time ls -lR > /dev/null real 0m0.292s user 0m0.138s sys 0m0.152s $ time find . > /dev/null real 0m0.074s user 0m0.017s sys 0m0.056s $ tree appears to be faster than ls -lR (though ls -R is faster than tree, but it does not give full paths). find is the fastest. Can anyone think of a faster and/or better approach? On Windows, I may simply ship a 32-bit binary tree.exe or ls.exe if necessary. Update 1: Added find

  Read the article

• Linking how PHP/HTML

  - by Azzyh

  Hello. Alright so im done doing pages with frames, and know i splitted up my design to top.php and bottom.php. In top.php it's linking to style.css and ajax_framework.js and such.. Now this works great until i tried to include top.php & bottom.php in videos/index.php (another dirr), i did like this: include "../top.php"; <-- and the originally index.php --> include "../bottom.php"; Now when i enter the site, it wont load style.css, probably because it thinks that style.css needs to be in videos/ directory, same goes with ajax_framework.js that are both files are on the parent ../ directory. Now what do i do? Some method or technique to solve this in a good way? So i dont have to copy style.css and ajax_framework.js into every directory i have, because then later if i want to change something i would need to change in all directories, which would be my last thing i want to do.. hope you got some nice techniques thank you

  Read the article

• Help me understand WebDAV and Autoversioning

  - by Malfist

  I just read the WebDAV Appendex in the O'Reilly Subversion book. I don't quite understand it. It talked about users being able to "mount" WebDAV directories (trees) and manipulate the files like they would normally and on saves the server would automagically create a new revision. The way it explained it, it sounded like it would work for any program, but then at the end of the appendix, it listed a series of programs that worked with WebDAV servers, which leads me to think that maybe it doesn't work like it originally described it. My question is this: How exactly do you interact with a WebDAV repository? Can I do this for example: Copy a file locally via ftp, edit it with notepad++, and then upload it via ftp to the server and have the server do a commit and create a new revision with the file I just edited and uploaded. Also, if that is possible, what happens if two people edit the file locally (on their machines) and uploaded two reversions to the server? With webDAV will I be able to replace Dreamweaver's "Oops, someone edited this before you" with simple ftp uploads and subversion conflict resolutions?

  Read the article

• NAnt and relative path execution

  - by stacker

  How can I assign to trunk.dir property a relative path to the trunk location? This is my nant.build file: <?xml version="1.0" encoding="utf-8"?> <project name="ProjectName" default="build" xmlns="http://nant.sf.net/release/0.85/nant.xsd"> <!-- Directories --> <property name="trunk.dir" value="C:\Projects\ProjectName" /><!-- I want relative path over here! --> <property name="source.dir" value="${trunk.dir}src\" /> <!-- Working Files --> <property name="msbuild.exe" value="C:\WINDOWS\Microsoft.NET\Framework\v4.0.30319\msbuild.exe" /> <property name="solution.sln" value="${source.dir}ProjectName.sln" /> <!-- Called Externally --> <target name="compile"> <!-- Rebuild foces msbuild to clean and build --> <exec program="${msbuild.exe}" commandline="${solution.sln} /t:Rebuild /v:q" /> </target> </project>

  Read the article

• PHP include doesn't work

  - by Chris

  I'm not sure how simple is this to solve, but I assume I'm doing something wrong. I'm new to PHP, so bear with me, please. When I started learning PHP, I always placed all my project files into the same folder along with index.php and thus included everything like this: <?php include('./translation.php'); ?> Later on in the process of learning as I gained experience and my skill increased, I had to start using folders and place my files into sub folders. I ended up successfully including my files with the following: <?php include('../translation.php'); ?> My trouble-free coding took an unexpected turn when I decided to start using sub-sub folders. After placing all the files even deeper into the file structure I was shocked to find out that I cannot include them anymore, using: <?php include('.../translation.php'); ?> Now I'm lost. What did I do wrong? Am I to understand that I cannot include files deeper than 2 directories in the project? Should I start using a different file system?

  Read the article

• Creating a HTTP handler for IIS that transparently forwards request to different port?

  - by Lasse V. Karlsen

  I have a public web server with the following software installed: IIS7 on port 80 Subversion over apache on port 81 TeamCity over apache on port 82 Unfortunately, both Subversion and TeamCity comes with their own web server installations, and they work flawlessly, so I don't really want to try to move them all to run under IIS, if that is even possible. However, I was looking at IIS and I noticed the HTTP redirect part, and I was wondering... Would it be possible for me to create a HTTP handler, and install it on a sub-domain under IIS7, so that all requests to, say, http://svn.vkarlsen.no/anything/here is passed to my HTTP handler, which then subsequently creates a request to http://localhost:81/anything/here, retrieves the data, and passes it on to the original requestee? In other words, I would like IIS to handle transparent forwards to port 81 and 82, without using the redirection features. For instance, Subversion doesn't like HTTP redirect and just says that the repository has been moved, and I need to relocate my working copy. That's not what I want. If anyone thinks this can be done, does anyone have any links to topics I need to read up on? I think I can manage the actual request parts, even with authentication, but I have no idea how to create a HTTP handler. Also bear in mind that I need to handle sub-paths and documents beneath the top-level domain, so http://svn.vkarlsen.no/whatever/here needs to be handled by a single handler, I cannot create copies of the handler for all sub-directories since paths are created from time to time.

  Read the article

• Javascript/Jquery pop-up window in Asp.Net MVC4

  - by Mark

  Below I have a "button" (just a span with an icon) that creates a pop-up view of a div in my application to allow users to compare information in seperate windows. However, I get and Asp.Net Error as follows: **Server Error in '/' Application. The resource cannot be found. Requested URL: /Home/[object Object]** Does anyone have an Idea of why this is happending? Below is my code: <div class="module_actions"> <div class="actions"> <span class="icon-expand2 pop-out"></span> </div> </div> <script> $(document).ajaxSuccess(function () { var Clone = $(".pop-out").click(function () { $(this).parents(".module").clone().appendTo("#NewWindow"); }); $(".pop-out").click(function popitup(url) { LeftPosition = (screen.width) ? (screen.width - 400) / 1 : 0; TopPosition = (screen.height) ? (screen.height - 700) / 1 : 0; var sheight = (screen.height) * 0.5; var swidth = (screen.width) * 0.5; settings = 'height=' + sheight + ',width=' + swidth + ',top=' + TopPosition + ',left=' + LeftPosition + ',scrollbars=yes,resizable=yes,toolbar=no,status=no,menu=no, directories=no,titlebar=no,location=no,addressbar=no' newwindow = window.open(url, '/Index', settings); if (window.focus) { newwindow.focus() } return false; }); });

  Read the article

• Unable to access SQL reporting services on shared site with Themes enabled

  - by Grant

  Hi, i am having some trouble with my IIS web server & SQL reporting services. At the current time my site is playing host to both reporting services (/reports & /reportserver) as well as my personal website (domain.com) Only just recently have i implemented a Theme on my site and as such i have placed a statement in my web.config file directing it to apply a certain theme in the following manner <pages styleSheetTheme="General"> Because of this when i try to access the report pages it failed telling me it couldnt find the Theme so what i did was locate the source files for the /reports & /reportserver directories and place the App_Theme folder in them hoping that would sort everything out. What i am getting now is the following error *Using themed css files requires a header control on the page. e.g. head runat="server" * Does anyone know how i can get around this? Do i have to hack the sql reporting aspx pages? Please note i do NOT want to remove the web.config declaration.

  Read the article

• How to import a module from PyPI when I have another module with the same name

  - by kuzzooroo

  I'm trying to use the lockfile module from PyPI. I do my development within Spyder. After installing the module from PyPI, I can't import it by doing import lockfile. I end up importing anaconda/lib/python2.7/site-packages/spyderlib/utils/external/lockfile.py instead. Spyder seems to want to have the spyderlib/utils/external directory at the beginning of sys.path, or at least none of the polite ways I can find to add my other paths get me in front of spyderlib/utils/external. I'm using python2.7 but with from __future__ import absolute_import. Here's what I've already tried: Writing code that modifies sys.path before running import lockfile. This works, but it can't be the correct way of doing things. Circumventing the normal mechanics of importing in Python using the imp module (I haven't gotten this to work yet, but I'm guessing it could be made to work) Installing the package with something like pip install --install-option="--prefix=modules_with_name_collisions" package_name. I haven't gotten this to work yet either, but I'm guess it could be made to work. It looks like this option is intended to create an entirely separate lib tree, which is more than I need. Source Using pip install --target=lockfile_from_pip. The files show up in the directory where I tell them to go, but import doesn't find them. And in fact pip uninstall can't find them either. I get Cannot uninstall requirement lockfile-from-pip, not installed and I guess I will just delete the directories and hope that's clean. Source So what's the preferred way for me to get access to the PyPI lockfile module?

  Read the article

• AIR File.resolvePath won't work anymore

  - by Palleas

  Hi all, I'm having a very strange issue, it looks like my application can't create file anymore. It works w/ directories, but the so-many-times-used resolvePath() methods doesn't. Here is what I do : var databaseFileContent : File = new File(File.desktopDirectory.nativePath + "/testing"); databaseFileContent.createDirectory(); databaseFileContent.resolvePath("test"); (Here I'm trying on desktop but that's the same w/ applicationStorageDirectory) When I execute this, it works only for the "testing" folder which is actually created, but my file isn't. I tried to create another application, doing this : trace(File.desktopDirectory.resolvePath("maiswtf.db").exists); trace(File.applicationStorageDirectory.resolvePath("wtf.db").exists); Both are displaying "false". Am I missing something here? I have another application with this code : var databaseFileContent : File = File.applicationStorageDirectory.resolvePath(File.separator + "sitra.db"); When I run this one, it works perfectly! My file is created at /sitra.db! Any hints? I thinks I'm going mad :/ Thanks!

  Read the article

• GNU/Linux developement n00b needs help porting C++ application from windows to GNU/Linux.

  - by AndrejaKo

  Hi! These questions may not be perfectly suited for this site, so I apologize in advance for asking them here. I'm trying to port a computer game from windows to GNU/Linux. It uses Ogre3D,CEGUI, ogreogg and ogrenewt. As far as I know all dependencies work on GNU/Linux and in the game itself there is no ooze-specific code. Here's the questions part: Is there any easy way to port visual studio 2008 project to GNU/Linux tool-chain? How do I manage dependencies? In Visual Studio, I'd just add them in property sheets or default directories. I assume on GNU/Linux autoconf and make take care of that, but in which way? Do I have to add each .cpp and .hpp manually or is there some way to automate things? How do I solve the problem of dependencies on different locations on different systems? I'd like to use Eclipse as IDE under GNU/Linux. I know that the best answer to most of my questions is RTFM, but I'm not sure what I exactly need and where to start looking.

  Read the article

• How do I delete folders in bash after successful copy (Mac OSX)?

  - by cohortq

  Hello! I recently created my first bash script, and I am having problems perfecting it's operation. I am trying to copy certain folders from one local drive, to a network drive. I am having the problem of deleting folders once they are copied over, well and also really verifying that they were copied over). Is there a better way to try to delete folders after rsync is done copying? I was trying to exclude the live tv buffer folder, but really, I can blow it away without consequence if need be. Any help would be great! thanks! #!/bin/bash network="CBS" useracct="tvcapture" thedate=$(date "+%m%d%Y") folderToBeMoved="/users/$useracct/Documents" newfoldername="/Volumes/Media/TV/$network/$thedate" ECHO "Network is $network" ECHO "date is $thedate" ECHO "source is $folderToBeMoved" ECHO "dest is $newfoldername" mkdir $newfoldername rsync -av $folderToBeMoved/"EyeTV Archive"/*.eyetv $newfoldername --exclude="Live TV Buffer.eyetv" # this fails when there is more than one *.eyetv folder if [ -d $newfoldername/*.eyetv ]; then #this deletes the contents of the directories find $folderToBeMoved/"EyeTV Archive"/*.eyetv \( ! -path $folderToBeMoved/"EyeTV Archive"/"Live TV Buffer.eyetv" \) -delete #remove empty directory find $folderToBeMoved/"EyeTV Archive"/*.eyetv -type d -exec rmdir {} \; fi

  Read the article

• Redirect requests only if the file is not found?

  - by ZenBlender

  I'm hoping there is a way to do this with mod_rewrite and Apache, but maybe there is another way to consider too. On my site, I have directories set up for re-skinned versions of the site for clients. If the web root is /home/blah/www, a client directory would be /home/blah/www/clients/abc. When you access the client directory via a web browser, I want it to use any requested files in the client directory if they exist. Otherwise, I want it to use the file in the web root. For example, let's say the client does not need their own index.html. Therefore, some code would determine that there is no index.html in /home/blah/www/clients/abc and will instead use the one in /home/blah/www. Keep in mind that I don't want to redirect the client to the web root at any time, I just want to use the web root's file with that name if the client directory has not specified its own copy. The web browser should still point to /clients/abc whether the file exists there or in the root. Likewise, if there is a request for news.html in the client directory and it DOES exist there, then just serve that file instead of the web root's news.html. The user's experience should be seamless. I need this to work for requests on any filename. If I need to, for example, add a new line to .htaccess for every file I might want to redirect, it rather defeats the purpose as there is too much maintenance needed, and a good chance for errors given the large number of files. In your examples, please indicate whether your code goes in the .htaccess file in the client directory, or the web root. Web root is preferred. Thanks for any suggestions! :)

  Read the article

• How can I make one Maven module depend on another?

  - by Daniel Pryden

  OK, I thought I understood how to use Maven... I have a master project M which has sub-projects A, B, and C. C contains some common functionality (interfaces mainly) which is needed by A and B. I can run mvn compile jar:jar from the project root directory (the M directory) and get JAR files A.jar, B.jar, and C.jar. (The versions for all these artifacts are currently 2.0-SNAPSHOT.) The master pom.xml file in the M directory lists C under its <dependencyManagement> tag, so that A and B can reference C by just including a reference, like so: <dependency> <groupId>my.project</groupId> <artifactId>C</artifactId> </dependency> So far, so good. I can run mvn compile from the command line and everything works fine. But when I open the project in NetBeans, it complains with the problem: "Some dependency artifacts are not in the local repository", and it says the missing artifact is C. Likewise from the command line, if I change into the A or B directories and try to run mvn compile I get "Build Error: Failed to resolve artifact." I expect I could manually go to where my C.jar was built and run mvn install:install-file, but I'd rather find a solution that enables me to just work directly in NetBeans (and/or in Eclipse using m2eclipse). What am I doing wrong?

  Read the article

• importing symbols from python package into caller's namespace

  - by Paul C

  I have a little internal DSL written in a single Python file that has grown to a point where I would like to split the contents across a number of different directories + files. The new directory structure currently looks like this: dsl/ __init__.py types/ __init__.py type1.py type2.py and each type file contains a class (e.g. Type1). My problem is that I would like to keep the implementation of code that uses this DSL as simple as possible, something like: import dsl x = Type1() ... This means that all of the important symbols should be available directly in the user's namespace. I have tried updating the top-level __init__.py file to import the relevant symbols: from types.type1 import Type1 from types.type2 import Type2 ... print globals() the output shows that the symbols are imported correctly, but they still aren't present in the caller's code (the code that's doing the import dsl). I think that the problem is that the symbols are actually being imported to the 'dsl' namespace. How can I change this so that the classes are also directly available in the caller's namespace?

  Read the article

• Process a set of files from a source directory to a destination directory in Python

  - by Spoike

  Being completely new in python I'm trying to run a command over a set of files in python. The command requires both source and destination file (I'm actually using imagemagick convert as in the example below). I can supply both source and destination directories, however I can't figure out how to easily retain the directory structure from the source to the destination directory. E.g. say the srcdir contains the following: srcdir/ file1 file3 dir1/ file1 file2 Then I want the program to create the following destination files on destdir: destdir/file1, destdir/file3, destdir/dir1/file1 and destdir/dir1/file2 So far this is what I came up with: import os from subprocess import call srcdir = os.curdir # just use the current directory destdir = 'path/to/destination' for root, dirs, files in os.walk(srcdir): for filename in files: sourceFile = os.path.join(root, filename) destFile = '???' cmd = "convert %s -resize 50%% %s" % (sourceFile, destFile) call(cmd, shell=True) The walk method doesn't directly provide what directory the file is under srcdir other than concatenating the root directory string with the file name. Is there some easy way to get the destination file, or do I have to do some string manipulation in order to do this?

  Read the article

• Behavior of Struts2 and convention-plugin when there is Index(extends ActionSupport)

  - by hanishi

  We have an Action class named 'Index' immediately under com.example.common.action and is annotated @ParentPackage('default') which is declared in package directive in struts.xml and has "/" for its namespace and extends "struts-default". It also declares @Result so that it responses with jsp files corresponding the string values returned by its execute() method. In our struts.xml, the following struts setting is configured along with other necessary configurations that are needed for convention-plugin. <constant name="struts.action.extension" value=","/> When accessing /my_context/none_existing_path, the request apparently hits this Index class and the contents of the jsp declared in the Index's @Result section gets returned. However, if we provide /my_context/, we receive the following error: HTTP Status 404-There is no Action mapped for namespace[/] and action name [] associated with context path [/my_context]. We want to know the reason why accessing /my_context/none_existing_path, where none_existing_path has no matching action, can fallback to Index class, but error is returned when when the URL requested is just /my_context/. Currently, our convention-plugin settings are declared as follows: <constant name="struts.convention.package.locators.basePackage" value="com.example"/> <constant name="struts.convention.package.locators" value="action"/> Strangely, if we changed the value of the struts.convention.package.locators.basePackage to om.example.common, in which the aforementioned Index file can be immediately found by narrowing the search scope, requesting /my_context/ displays the content of the jsps declared in @Result section of the Index class. However, as our action classes are distributed throughout the com.example.[a-z].action packages, where [a-z] represents the large volume of directories we have in our package structure, we cannot use this trick as a workaround. We have also tried placing index.jsp at the top level of the class path, and have the index.jsp redirect to /my_context/index, which worked but not what we want. Could this be a bug? We appreciate your responses. Thank you in advance. EDIT: JIRA registered, problem solved (from Struts 2.3.12 up)

  Read the article

• Resources for setting up a Visual Studio/C++ development environment

  - by Tom H.

  I haven't done much "front-end" development in about 15 years since moving to database development. I'm planning to start work on a personal project using C++ and since I already have MSDN I'll probably end up doing it in Visual Studio 2010. I'm thinking about using Subversion as a version control system eventually. Of course, I'd like to get up and running as quickly as I can, but I'd also like to avoid any pitfalls from a poorly organized project environment. So, my question is, are there any good resources with common best practices for setting up a development environment? I'm thinking along the lines of where to break down a solution into multiple projects if necessary, how to set up a unit testing process, organizing resources, directories, etc. Are there any great add-ons that I should make sure I have set up from the start? Most tutorials just have one simple project, type in your code and click on build to see that your new application says, "Hello World!". This will be a Windows application with several DLLs as well (no web development), so there doesn't need to be a deploy to a web server kind of process. Mostly I just want to make sure that I don't miss anything big and then have to extensively refactor because of it. Thanks!

  Read the article

• What is the proper syntax for getting a Makefile to print the output directory of one of its output zip files?

  - by 9exceptionThrower9

  I'm trying to edit an Android Makefile in the hopes of getting it to print out the directory (path) location of one the ZIP files it creates. Ideally, since the build process is long and does many things, I would like for it print out the pathway to the ZIP file to a text file in a different directory I can access later: Pseudo-code idea: # print the desired pathway to output file print(getDirectoryOf(variable-name.zip)) > ~/Desktop/location_of_file.txt The Makefile snippet where I would like to insert this new bit of code is shown below. I am interested in finding the directory of $(name).zip (that is specific file I want to locate): # ----------------------------------------------------------------- # A zip of the directories that map to the target filesystem. # This zip can be used to create an OTA package or filesystem image # as a post-build step. # name := $(TARGET_PRODUCT) ifeq ($(TARGET_BUILD_TYPE),debug) name := $(name)_debug endif name := $(name)-target_files-$(FILE_NAME_TAG) intermediates := $(call intermediates-dir-for,PACKAGING,target_files) BUILT_TARGET_FILES_PACKAGE := $(intermediates)/$(name).zip $(BUILT_TARGET_FILES_PACKAGE): intermediates := $(intermediates) $(BUILT_TARGET_FILES_PACKAGE): \ zip_root := $(intermediates)/$(name) # $(1): Directory to copy # $(2): Location to copy it to # The "ls -A" is to prevent "acp s/* d" from failing if s is empty. define package_files-copy-root if [ -d "$(strip $(1))" -a "$$(ls -A $(1))" ]; then \ mkdir -p $(2) && \ $(ACP) -rd $(strip $(1))/* $(2); \ fi endef

  Read the article

• How to mock/stub a directory of files and their contents using RSpec?

  - by John Topley

  A while ago I asked "How to test obtaining a list of files within a directory using RSpec?" and although I got a couple of useful answers, I'm still stuck, hence a new question with some more detail about what I'm trying to do. I'm writing my first RubyGem. It has a module that contains a class method that returns an array containing a list of non-hidden files within a specified directory. Like this: files = Foo.bar :directory => './public' The array also contains an element that represents metadata about the files. This is actually a hash of hashes generated from the contents of the files, the idea being that changing even a single file changes the hash. I've written my pending RSpec examples, but I really have no idea how to implement them: it "should compute a hash of the files within the specified directory" it "shouldn't include hidden files or directories within the specified directory" it "should compute a different hash if the content of a file changes" I really don't want to have the tests dependent on real files acting as fixtures. How can I mock or stub the files and their contents? The gem implementation will use Find.find, but as one of the answers to my other question said, I don't need to test the library. I really have no idea how to write these specs, so any help much appreciated!

  Read the article

< Previous Page | 388 389 390 391 392 393 394 395 396 397 398 399  | Next Page >