Search Results

Search found 44476 results on 1780 pages for 'wcf test client'.

Page 392/1780 | < Previous Page | 388 389 390 391 392 393 394 395 396 397 398 399  | Next Page >

  • What is a Coding Dojo?

    - by huwyss
    Recently i found out that there is a thing called "coding dojo". The point behind it is that software developers want to have a space to learn new stuff like processes, methods, coding details, languages, and whatnot in an environment without stress. Just for fun. No competition. No results required. No deadlines.Some days ago I joined the Zurich coding dojo. We were three programmers with different backgrounds.We gave ourselves the task to develop a method that takes an input value and returns its prime factors. We did pair programming and every few minutes we switched positions. We used test driven development. The chosen programming language was Ruby.I haven't really done TDD before. It was pretty interesting to see the algorithm develop following the testcases.We started with the first test input=1 then developed the most simple productive program that passed this very first test. Then we added the next test input=2 and implemented the productive code. We kept adding tests and made sure all tests are passed until we had the general solution.When we improved the performance of our code we saw the value of the tests we wrote before. Of course our first performance improvement broke several tests.It was a very interesting experience to see how other developers think and how they work. I will participate at the dojo again and can warmly recommend it to anyone. There are  coding dojos all over the world.Have fun!

    Read the article

  • Block SMTP session with sender domain which doesn't itself accept SMTP connection.

    - by bignose
    I'm administrating a mail service for a small business. Their mail host's internet connection is an ADSL service with a permanent IP address. Unfortunately, many misconfigured mail systems will happily deliver to this host, but, when the host attempts to send mail back (e.g. a bounce notice, or a normal response from someone), the declared sender's domain has an MX which refuses to receive connections from this host. That misconfiguration makes their system a one-way mail sender, which is a problem. How can I configure Postfix on this customer's mail host to refuse SMTP sessions that declare a sender domain which itself refuses SMTP from this host? That is, if the SMTP client declares a domain that we can't make SMTP connections back to, then there's not much point accepting the incoming connection in the first place. Note that I'm not, as some commenters have assumed, talking about checking whether the SMTP client will receive messages. The check I want is whether the declared sender's domain (regardless of who the current SMTP client is) will accept SMTP connections from here. In other words: when we get around to sending a message back, we'll need the sender's domain to accept SMTP connections; I want to do that check before accepting the incoming session. I'm imagining a late check (after the low-cost checks to winnow most of the rubbish connections) that keeps the client on the other end while it attempts an SMTP client connection back to the declared domain of the sender. If that connection is rejected, the incoming one is also rejected. I'm also open to other suggestions for how this problem might be addressed (short of not using this mail host at all, which isn't an option).

    Read the article

  • FREE goodies if you are a UK based software house already live on the Windows Azure Platform

    - by Eric Nelson
    In the UK we have seen some fantastic take up around the Windows Azure Platform and we have lined up some great stuff in 2011 to help companies fully exploit the Cloud – but we need you to tell us what you are up to! Once you tell us about your plans around Windows Azure, you will get access to FREE benefits including email based developer support and free monthly allowance of Windows Azure, SQL Azure and AppFabric from Jan 2011 – and more! (This offer is referred to as Cloud Essentials and is explained here) And… we will be able to plan the right amount of activity to continue to help early adopters through 2011. Step 1: Sign up your company to Microsoft Platform Ready (you will need a windows live id to do this) Step 2: Add your applications For each application, state your intention around Windows Azure (and SQL etc if you so wish) Step 3: Verify your application works on the Windows Azure Platform Step 4 (Optional): Test your application works on the Windows Azure Platform Download the FREE test tool. Test your application with it and upload the successful results. Step 5: Revisit the MPR site in early January to get details of Cloud Essentials and other benefits P.S. You might want some background on the “fantastic take up” bit: We helped over 3000 UK companies deploy test applications during the beta phase of Windows Azure We directly trained over 1000 UK developers during 2010 We already have over 100 UK applications profiled on the Microsoft Platform Ready site And in a recent survey of UK ISVs you all look pretty excited around Cloud – 42% already offer their solution on the Cloud or plan to.

    Read the article

  • Deactivating website in ISPConfig shows another site

    - by Mattias
    A long time ago, one of our clients setup a subdomain pointing to our ip-adress. We added a website (SitesWebsiteAdd new website) that points to one of our servers. The project is now closed and the client wants us to remove the content. When we deactivate (by unclicking active) this site it automatically defaults to another website we have in our list (!?). So, because the client is still pointing to our ip, when entering project.client.com another client project is showing up by default. How is this possible? Any suggestions? I can ofcourse give you guys more details when you tell me what details you need. Thanks

    Read the article

  • kill sessions for other machines

    - by LipKee
    I've an admin and client site. Multiple users will view at client site at the same time. It is possible that I can force the users logout of my client site from admin site? I'm now using classic ASP and the In Proc session is used. Is there a way where I can kill all the sessions of the users and force them to logout?

    Read the article

  • Exposing SOAP, OData, and JSON Endpoints for RIA Services (Silverlight TV 26)

    In this video, John meets with Deepesh Mohnani from the WCF RIA Services team. Deepesh demonstrates how to expose various endpoints from WCF RIA Services. This is a great explanation and walk through of how to open RIA Services domain services to clients, including: Silverlight clients (of course) Creating an OData endpoint and showing how Excel can use it Creating a SOAP endpoint to a domain service and using it from a Windows Phone 7 application Creating a JSON endpoint and having...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • How to add delay in autologin

    - by raj
    I enabled autologin in my system (CentOS 6.2) for that I edited this file /etc/gdm/custom.conf In that I entered this code [daemon] AutomaticLoginEnable=true AutomaticLogin=test Here test means one account name, for that account autologin is working but the problem is not possible to logout. That is because everytime while I logout it will go to gdm(graphical display manager) and there it Again checks for account test. It is available right so it will again login to same account. Here I want add delay, that means it should wait for sometime, If no one login to any other account, then only test account will log. how to add delay?

    Read the article

  • Making Multilingual J! 1.5 + + Joomfish + VM 1.17 more workable

    - by rhand
    I have been working with a multilingual Joomla! 1.5.23 e-commerce website for a client for quite a while and made several customizations. But the client is still not happy he has to adjust content at at least three locations: Joomfish Virtuemart Article Manager Joomfish is nice in the way that it allows you to create multilingual content and copy and paste the source language on the same page, which makes translation work easier but it is annoying in the way you have to edit several custom fields at different locations/ content types. As Joomla! source language content still needs to be created in the article manager first this is the second location the client has to work at. The third location is Virtuemart. Here all the products and product categories are created. And here we added some custom fields as well. Now I was considering upgrading the website to Joomla 1.7 or later on to 1.8. This J! versions have better multilingual support. But I wonder if er can really make the client's life easier. We will still have to copy the source language to a new article and create content in another language. We will still have the issue of content in custom fields that needs to be translated and we will still have to create content. Should I go for another CMS such as Magento or do you think there is a way in a more recent Joomla! version to work with all content in one or max two locations?

    Read the article

  • Tomcat + Spring + CI workflow

    - by ex3v
    We're starting our very first project with Spring and java web stack. This project will be mainly about rewriting quite large ERP/CRM from Zend Framework to Java. Important factor in my question is that I come from php territory, where things (in terms of quality) tend to look different than in java world. Fatcs: there will be 2-3 developers, at least one of developers uses Windows, rest uses Linux, there is one remote linux-based machine, which should handle test and production instances, after struggling with buggy legacy code, we want to introduce good programming and development practices (CI, tests, clean code and so on) client: internal, frequent business logic changes, scrum, daily deployments What I want to achieve is good workflow on as many development stages as possible (coding - commiting - testing - deploying). The problem is that I've never done this before, so I don't know what are best practices to do this. What I have so far is: developers code locally, there is vagrant instance on every development machine, managed by puppet. It contains the same linux, jenkins and tomcat versions as production machine, while coding, developer deploys to vagrant machine, after local merge to test branch, jenkins on vagrant handles tests, when everything is fine, developer pushes commits and merges jenkins on remote machine pulls commit from test branch, runs tests and so on, if everything looks green, jenkins deploys to test tomcat instance Deployment to production is manual (altough it can be done using helping scripts) when business logic is tested by other divisions and everything looks fine to client. Now, the real question: does above make any sense? Things that I'm not sure about: Remote machine: won't there be any problems with two (or even three, as jenkins might need one) instances of same app on tomcat? Using vagrant to develop on php environment is just vise. Isn't this overkill while using Tomcat? I mean, is there higher probability that tomcat will act the same on every machine? Is there sense of having local jenkins on vagrant?

    Read the article

  • Postgres pgpass windows - not working

    - by Scott
    DB: Postgres 9.0 Client: Windows 7 Server Windows 2008, 64bit I'm trying to connect remotely to a postgres instance for purposes of performing a pg_dump to my local machine. Everything works from my client machine, except that I need to provide a password at the password prompt, and I'd ultimately like to batch this with a script. I've followed the instructions here: http://www.postgresql.org/docs/current/static/libpq-pgpass.html but it's not working. To recap, I've created a file on the client (and tried the server as well): C:/Users/postgres/AppData/postgresql/pgpass.conf, where postgresql is the db user. The file has one line with the following data: *:5432:*postgres:[mypassword] (also tried explicit ip/dbname values, all asterisks, and every combination in between. (I've also tried replacing each '*' with [localhost|myip] and [mydatabasename] respectively. From my client machine, I connect using: pg_dump -h [myip] -U postgres -w [mydbname] [mylocaldumpfile] I'm presuming that I need to provide the '-w' switch in order to ignore password prompt, at which point it should look in the AppData directory on the server. It just comes back with "connection to database failed: fe_sendauth: no password supplied. Any insights are appreciated. As a hack workaround, if there was a way I could tell the windows batch file on my client machine to inject the password at the postgres prompt, that would work as well. Thanks.

    Read the article

  • iis7 .net webservice 404 error

    - by agilenoob
    I have a webservice /test/Service1.asmx in the same folder as a page /test/test.aspx. The page works fine but I get the message bellow for the services in the same location. I know the file is there and the url is correct, and I have added the script module and managed handler as well. If anyone knows what I'm missing here I'd appreciate it Server Error in '/' Application. The resource cannot be found. Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. Please review the following URL and make sure that it is spelled correctly. Requested URL: /test/Service1.asmx Version Information: Microsoft .NET Framework Version:2.0.50727.4200; ASP.NET Version:2.0.50727.4016 FAILED REQUEST LOG: ModuleName ManagedPipelineHandler Notification 128 HttpStatus 404 HttpReason Not Found HttpSubStatus 0 ErrorCode 0 ConfigExceptionInfo Notification EXECUTE_REQUEST_HANDLER ErrorCode The operation completed successfully. (0x0)

    Read the article

  • Postgres pgpass windows - not working

    - by Scott
    DB: Postgres 9.0 Client: Windows 7 Server Windows 2008, 64bit I'm trying to connect remotely to a postgres instance for purposes of performing a pg_dump to my local machine. Everything works from my client machine, except that I need to provide a password at the password prompt, and I'd ultimately like to batch this with a script. I've followed the instructions here: http://www.postgresql.org/docs/current/static/libpq-pgpass.html but it's not working. To recap, I've created a file on the client (and tried the server as well): C:/Users/postgres/AppData/postgresql/pgpass.conf, where postgresql is the db user. The file has one line with the following data: *:5432:*postgres:[mypassword] (also tried explicit ip/dbname values, all asterisks, and every combination in between. (I've also tried replacing each '*' with [localhost|myip] and [mydatabasename] respectively. From my client machine, I connect using: pg_dump -h [myip] -U postgres -w [mydbname] [mylocaldumpfile] I'm presuming that I need to provide the '-w' switch in order to ignore password prompt, at which point it should look in the AppData directory on the server. It just comes back with "connection to database failed: fe_sendauth: no password supplied. Any insights are appreciated. As a hack workaround, if there was a way I could tell the windows batch file on my client machine to inject the password at the postgres prompt, that would work as well. Thanks.

    Read the article

  • One dns server in different subnets

    - by hofmeister
    I have installed a small Linux server; the server is in a different subnet as the internet hosts. I added a route to my nat router to create a connection between both subnets. In both subnets I use an extra dhcp Server. Subnet A: 192.168.0.0/26 Subnet B: 192.168.1.0/26 Router: 192.168.0.1, Server in A: 192.168.0.62, Server in B: 192.168.1.62 internet ____ nat router ___ (Sub A)___ internet hosts | |____(Sub B)___ other hosts I could ping every host. Also the hosts which are connected to the subnet b, has internet connection. But sadly I have a problem with the dns server. I use the dnsServer from my nat router, I set the dns Server for subnet b to the ip 192.168.0.1, but every dns entries are equal with the hostname from my linux server. Example if the hostname from the server is test Test 192.168.0.62 //Server subnet a Test-2 192.168.1.62 //Server subnet b Test-2-2 192.168.1.1 //host a Test-2-2-2 192.168.1.2 //host b Any idea what went wrong? The internet dns resolution works fine.

    Read the article

  • GMail detecting mail as spam

    - by Petru Toader
    I've been trying for a long time to get our company's mail server send mail that will get accepted by the GMail spam filter. I have managed making it work for Yahoo Mail and Hotmail, sadly GMail is still marking our mails as spam. I have configured DKIM, SPF, DMARC and verified our mail server IP address against blacklists. I also have pasted here the headers GMail gets when we send a mail. Delivered-To: [email protected] Received: by 10.42.215.6 with SMTP id hc6csp107427icb; Wed, 20 Aug 2014 07:34:26 -0700 (PDT) X-Received: by 10.194.100.34 with SMTP id ev2mr59101019wjb.76.1408545265402; Wed, 20 Aug 2014 07:34:25 -0700 (PDT) Return-Path: <[email protected]> Received: from mail.phyramid.com (mail.phyramid.com. [178.157.82.23]) by mx.google.com with ESMTPS id dj10si4827754wib.79.2014.08.20.07.34.24 for <[email protected]> (version=TLSv1.1 cipher=ECDHE-RSA-RC4-SHA bits=128/128); Wed, 20 Aug 2014 07:34:25 -0700 (PDT) Received-SPF: pass (google.com: domain of [email protected] designates 178.157.82.23 as permitted sender) client-ip=178.157.82.23; Authentication-Results: mx.google.com; spf=pass (google.com: domain of [email protected] designates 178.157.82.23 as permitted sender) [email protected]; dkim=pass [email protected] Received: from localhost (localhost [127.0.0.1]) by mail.phyramid.com (Postfix) with ESMTP id ED2BB2017AC for <[email protected]>; Wed, 20 Aug 2014 17:33:23 +0300 (EEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=phyramid.com; h= content-type:content-type:mime-version:x-mailer:subject:subject :message-id:to:from:from:date:date; s=dkim; t=1408545197; x= 1409409197; bh=e04RtoyF7G39lfCvA9LLhTz4nF64siZtN5IYmC18Xsc=; b=o +6mO8Uz4Uf1G4U2q6tKUiEy2N2n/5R2VtPPwIvBE5xzK/hEd2sDGMxVzQVgIDCsK Q0Xh+auPaQpxldQ+AEcL2XSZMrk/g0mJONjkpI19I5AwGIJCR1SVvxdecohTn9iR bCHzrGi2wAicfDBzOH6lUBNfh2thri79aubdCYc97U= X-Amavis-Modified: Mail body modified (using disclaimer) - mail.phyramid.com X-Virus-Scanned: Debian amavisd-new at mail.phyramid.com Received: from mail.phyramid.com ([127.0.0.1]) by localhost (mail.phyramid.com [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id 3JcgXZAXeFtX for <[email protected]>; Wed, 20 Aug 2014 17:33:17 +0300 (EEST) Received: from whiterock.local (unknown [109.98.21.30]) by mail.phyramid.com (Postfix) with ESMTPSA id 05CAE200280 for <[email protected]>; Wed, 20 Aug 2014 17:33:15 +0300 (EEST) Date: Wed, 20 Aug 2014 17:34:15 +0300 From: Company Mail <[email protected]> To: [email protected] Message-ID: <[email protected]> Subject: hey there! X-Mailer: Airmail (247) MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Content-Disposition: inline How was your summer? ---- Thanks a lot!

    Read the article

  • Which architecture should I choose for this project?

    - by Jichao
    I have a project. The server which based on a phone PCI-board is responsible for received phone calls from the customer and then redirect the phone calls to the operators. I have decided to code the server using c++ programming language and qt framework because the PCI-board SDK's interface is c/c++ originated and for the sake of portability. The server need to send the information of the the customer to the operator while ringing the operator and the ui interface of the operator client should be browser-based. Now the key problem is how could the server notify the operator that there is a phone call for he/she. One architecture I have considered is like this, The operator browser client use ajax pooling the web server to check whether there is call to the client; the web server pooling the database server to check whether there is call; the desktop server(c++) wait for the phone calls and set the information in the database. The other operations such as hang up the phone call from the client, retransfer the phone call to the other operator also use this architecture. Then, is there any way other than pooling the server(js code setInterval('getDail', 1000)) to decide whether there is a call to the operator? Is this architecture feasible or should I use some terrific techniques that I do know such as web services,xml-rpc, soap???

    Read the article

  • Synergy Windows 7 Screen Saver issue

    - by SynergyUser
    I have synergy server running on a Windows 7 laptop, I have another laptop running windows XP as the Client. When synergy is first started the Screen Saver will start after the 5 mins of inactivity no problem but after mouse/keyboard input then waiting another 5 minutes + the screen saver will not come back on. The mouse is on the server NOT the client. I have tried unchecking "sync screen savers" I have tried right clicking and running the synergy server as administrator. I have tried versions 1.3.4, 1.3.6, 1.4.2 both 32 bit and 64 bit. I have tried running in XP compatibility mode. I have tried disconnecting the client. It feels like I've tried everything. The setup is as follows: The server is below the Client, the client is above the server. The server has a secondary monitor attached to it and yes I've tried running without the secondary monitor. the sever is an acer 5552G-5828. Any help would be awesome! I love synergy but without the screensavers it is annoying. Thanks!

    Read the article

  • Remote script execution on Windows 2003 server - alternatives to PSEXEC

    - by chickeninabiscuit
    We are wanting to deploy our application to our Test server from our Hudson server. I'd like to be able to have hudson copy the application files and start a script that would run locally on our Test server. We can't use psexec because of a cross domain policy. Currently we are doing this manually, by RDPing to the Test server and checking out the code from subversion manually. Are there alternatives to PSExec that can bypass the cross domain policy problem?

    Read the article

  • Can only access asp.net app on localhost

    - by Kevin Donn
    I'm trying to get an asp.net application up on IIS on a Windows Server 2008 machine. I can hit the app from localhost, no problem. But I can't access the app using the server's domain name either locally or from another machine on the network. But here's the odd part. I can access a normal file on IIS using the domain name, both from a browser running on the server and from a browser running on another machine on the network. Here's a synopsis ("http" converted to "htp" below because I don't have enough points to have all these links in my message): From IE on the server itself: works htp://localhost/foo.htm works htp://localhost/App works htp://test.foo.com/foo.htm dead htp://test.foo.com/App From IE on another machine (inside or outside my subnet): works htp://test.foo.com/foo.htm dead htp://test.foo.com/App And when I say "dead" I mean the request times out. Any ideas?

    Read the article

  • SSRS reports print button missing in IE 8

    - by Will Sams
    Seems like this is broken again (http://serverfault.com/questions/177268/ssrs-report-unable-to-load-client-print-control and SQL 2008 SP2 RsClientPrint ActiveX - "Unable to load client print control"). We updated all of our Windows 7 clients last Friday and it looks like the mighty "Unable to load client print control" has returned since then. Anyone aware of possible problems with the latest batch of Windows Updates?

    Read the article

  • What is the value to checking in broken unit tests?

    - by Adam W.
    While there are ways of keeping unit tests from being executed, what is the value of checking in broken unit tests? I will use a simple example. Case sensitivity. The current code is Case Sensitive. A valid input into the method is "Cat" and it would return an enum of Animal.Cat. However, the desired functionality of the method should not be case sensitive. So if the method described was passed "cat" it could possibly return something like Animal.Null instead of Animal.Cat and the unit test would fail. Though a simple code change would make this work, a more complex issue may take weeks to fix, but identifying the bug with a unit test could be a less complex task. The application currently being analyzed has 4 years of code that "works". However, recent discussions regarding unit tests has found flaws in the code. Some just need explicit implementation documentation (ex. case sensitive or not), or code that does not execute the bug based on how it is currently called. But unit tests can be created executing specific scenarios that will cause the bug to be seen and are valid inputs. What is the value of checking in unit tests that exercise the bug until someone can get around to fixing the code? Should this unit test be flagged with ignore, priority, category etc, to determine whether a build was successful based on tests executed? Eventually the unit test should be created to execute the code once someone fixes it. On one hand it shows that identified bugs have not been fixed. On the other, there could be hundreds of failed unit tests showing up in the logs and weeding through the ones that should fail vs. failures due to a code check-in would be difficult to find.

    Read the article

  • How to have Windows 7 remember a password for a Domain

    - by Kelly Jones
    About eighteen months ago, I wrote a post covering how to clear saved passwords in Windows XP.  This week at work I was reminded how useful it is to not only deleted saved passwords, but to also setup wildcard credentials using this same interface. The scenario that I run into as consultant working at a client site, is that my laptop is not a member of the Windows Domain that my client uses to secure their network. So, when I need to access file shares, shared printers, or even the clients internal websites, I’m prompted for a name and password.  By creating a wildcard entry on my laptop (for the user account that the client issued to me), I avoid this prompt and can seamlessly access these resources.  (This also works when you’ve configured Outlook to access Exchange via RPC over HTTP.) How to create a credential wild card entry in Windows 7: Go to your Start Menu --> Type "user" into the Search box Click on the “Manage your credentials” in the column on the left Click on the “Add a Windows credential” link Enter the Domain (in my case my client’s domain), something like this: *.contoso.com Enter the username and password That’s it.  You should now be able to access resources in that Domain without being prompted for your name and password.  Please note: if you are required to change your password periodically for that domain, you’ll need to update your saved password as well.

    Read the article

  • Message Date/Time tag in Lotus Notes

    - by TeeKay
    I've noticed that within Notes (8.5.2, basic client, fat client and iNotes) the date/time displayed on the eMail envelope AND the date/time on the message header is the same and appearently that time that Domino received the message. When using BES, the message forwarded to the BlackBerry by Domino/BES has the RECEIVED date/time on the envelope and the SENT date/time displayed in the message. In the basic/fat client with properties the sent time is viewable in one of the "Received" tags. Having the sent time easily viewable is helpful, especially if your trying to trouble-shoot a problem. Is this a configuration feature? Is it selectable in the client or in Domino? Thx

    Read the article

  • IIS FTP service - download timeouts and restarts getting the data twice

    - by accel229
    We have an IIS FTP site on a Windows Server 2003 x64 machine. Application Layer Gateway service is disabled (so http://support.microsoft.com/kb/931130 does not apply). Windows Firewall service is disabled as well. Connection timeout for the FTP site (there is only one) is set to 1,200 seconds = 20 minutes. An external client can connect to the site, list directory contents and download small files. When a client attempts to download a large file (eg, if the download continues for 3 minutes, which is still under 20 minutes, but relatively long), the server sends all data, then the connection times out, the client issues REST / RETR commands attempting to restart the download since after the last byte (which I believe should succeed and receive exactly 0 bytes), and the server behaves as if the client tried to restart after byte 0, that is, it sends the entire file all over. Any ideas on how to fix this?

    Read the article

  • how to remotely open an URL in Firefox in a specific profile?

    - by miernik
    I have several instances of Firefox with several different profiles running. Among them profiles with the names "software" and "test". I am trying to open an URL from a bash script to have it open in profile "test", like this: firefox -P "test" http://www.example.org/ However that opens it in profile "software" anyway. Any ideas? Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.1.8) Gecko/20100308 Iceweasel/3.5.8 (like Firefox/3.5.8) No, it is not a permissions problem, all my profile directories are perfectly under my permissions: root@przehyba:~/.mozilla# ls -ld firefox/ drwx------ 13 miernik miernik 4096 Mar 11 09:15 firefox/ root@przehyba:~/.mozilla# ls -ld firefox/* drwxr-xr-x 9 miernik miernik 4096 Mar 12 11:29 firefox/info -rw-r--r-- 1 miernik miernik 560 Mar 11 09:15 firefox/profiles.ini drwxr-xr-x 10 miernik miernik 4096 Mar 16 11:51 firefox/software drwxr-xr-x 9 miernik miernik 4096 Mar 11 09:14 firefox/tech drwxr-xr-x 11 miernik miernik 4096 Mar 15 22:48 firefox/test root@przehyba:~/.mozilla#

    Read the article

< Previous Page | 388 389 390 391 392 393 394 395 396 397 398 399  | Next Page >