pure virtual - Page 393

Renaming VLAN Interfaces in Linux

- by rhololkeolke

I need to know how to rename VLAN interfaces. I'm currently running Ubuntu 11.04. I'm running a networking application that takes frames on one interface applies things like delays and errors and then forwards the frames out another interface. The default naming convention which names things <interface>.<vlan> e.g. eth0.2 will not work for my purposes because the program which parses the configuration script for the networking application doesn't like the decimal in the interface name. I ran vconfig set_name_type VLAN_PLUS_VID which solves the decimal in the interface name problem, however, I can then no longer assign the same vlan id to multiple interfaces because they have the same name. I know how to change physical interface names using udev rules, but because the vlan's will have the same MAC address and they aren't physical interfaces I can't use those rules to rename the interfaces. Is there a way to rename any interface in linux, including the virtual ones? Is there a way to specify your own naming convention for config set_name_type option without having to recompile the source of vconfig?

Read the article

CentOS 6 and Sun/Oracle Java Issue

- by user1710563

I have a OpenVZ VPS running CentOS 6.3 64 bit and when I try to install JRE 7 64bit using the command: rpm -Uvh java.rpm It gives me this error: Preparing... ########################################### [100%] 1:jre ########################################### [100%] Unpacking JAR files... rt.jar... Error: Could not open input file: /usr/java/jre1.7.0_09/lib/rt.pack jsse.jar... Error: Could not open input file: /usr/java/jre1.7.0_09/lib/jsse.pack charsets.jar... Error: Could not open input file: /usr/java/jre1.7.0_09/lib/charsets.pack localedata.jar... Error: Could not open input file: /usr/java/jre1.7.0_09/lib/ext/localedata.pack I then tried the command: java -version And it gives me this error: Error occurred during initialization of VM Could not reserve enough space for object heap Error: Could not create the Java Virtual Machine Error: A fatal exception has occurred. Program will exit. Why does this happen if I have more than enough RAM on the VPS to run this (1GB)? Could it be an issue with the host node of the VPS? Thanks EDIT 1: Link to beancounter screenshot http://puu.sh/1xwxB EDIT 2: Link to htop screenshot http://puu.sh/1xwDl

Read the article

Increasing link speed on OpenVPN (bandwidth)

- by Mike

I have bought a tunnel service by using OpenVPN. For a year I've had 10 Mbps max upload/download speed but now I've bought an additional 20 Mbps making the available total bandwidth 30 Mbps for me. On their homepage there are some controls available for me, for example to restart the tunnel. I've done that. It also says that the speed has indeed been upgraded to 30 Mbps on their page. I also got an email that said they have upgraded the speed. However after I reboot my machine, and OpenVPN has started up and is running as usual, when I look at the Windows Task Manager (opens when pressing CTRL+SHIFT+ESC) in the "Networking" tab I still have a link speed of only 10 Mbps. Two adapters are listed: Local Area Connection 4 (10 Mbps) and Local Area Connection 5 (100 Mbps). LAC5 is my "real" adapter, I have a 100 Mbps Internet connection if I don't use a tunnel. LAC3 is the virtual adapter used by OpenVPN. The problem is that it is still showing 10 Mbps even though I have upgraded to 30 Mbps. How can I fix this?

Read the article

Better urls for this internal web server?

- by sprugman

I've got a server that I have admin access to, but don't fully manage. (I think it's a virtual machine, but I'm not 100% sure. It's running Apache on Windows Server 2003.) I share the ip with another user, so my sites all have to use the :8080 port. This is kind of ugly. Also, AFAIK, the only access I have is through an ip address. (I'm inside a corporate firewall and don't think I have access to a DNS server or anything.) I've adjusted my hosts file so I don't have to use the ip address on my local machine, but that's not a very generic solution. Are there any options to 1) get rid of the port requirement 2) be able to use a name (maybe a machine name) instead of the ip address in a generic way? (I'm not really a network admin -- I'm a developer managing this machine. The IT folks who really manage it are a few people away from me and tough to get to do anything, so I'm looking for a light-weight solution if possible.)

Read the article

How can I undo what I did when I accidentally booted linux host inside itself with VMware?

- by ThomasGHenry

Hello, I'm dual booting XP and Kubuntu. I wanted to boot to my existing raw scsi XP partition inside Kubuntu, not a virtual XP instance. I accidentally booted Kubuntu inside itself. I know this is a big mistake, so I interrupted the VM, which saved the state and closed. I rebooted the host and now I can't load the Kubuntu partition at boot time. I get a maintenance shell and the Kubuntu partition is read-only. I am able to boot XP as usual. I removed the HDD and tried to mount it on another computer as an external drive and neither partition (XP or Kubuntu) will be recognized, it just appears to be one device that still mounts and appears empty. From the maintenance shell I can see all the files are still on the Kubuntu partition. How can I undo what I did when I accidentally booted Kubuntu inside itself? Is it a matter of unlocking some files somewhere? how can I do that on a RO filesystem? Thanks!

Read the article

Our clients site is redirecting to a pill scammy site [closed]

- by Alex Demchak

Possible Duplicate: My server's been hacked EMERGENCY We've usually host our clients site, but we aren't hosting this one. The website itself (weddle-funeral.com) works just fine. if you load google and search for weddle funeral stayton oregon - and click that link, the site links to a scammy pill site. I went through the site and there were some php files in the wordpress plugins that got quarantined by my antivirus. I removed ALL non essential files, and uploaded fresh versions of all the plugins, but it's STILL redirecting from google. I tried logging in to the cpanel (on a virtual private server), and the cpanel flashed a red warning screen The site's security certificate is not trusted! You attempted to reach XXXXX.com, but the server presented a certificate issued by an entity that is not trusted by your computer's operating system. This may mean that the server has generated its own security credentials, which Google Chrome cannot rely on for identity information, or an attacker may be trying to intercept your communications. You should not proceed, especially if you have never seen this warning before for this site. (Keep in mind, that's for the HOSTING accounts CPanel) Is there something in the SERVER probably that's causing the redirect? EDIT: .htaccess file contents # BEGIN WordPress <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / RewriteRule ^index\.php$ - [L] RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule . /index.php [L] </IfModule> # END WordPress

Read the article

Page pool memory

- by legiwei

I'm currently using Windows XP SP3 32 bit, using C2D E6320 with 2GB RAM. When I am playing Starcraft 2, I encounter an error where it says my system is running low on page pool memory. Starcraft graphic settings suggested a high settings for me. I do not think it has to do with my GC but with my RAM. I then made a search to try to rectify the problem. Apparently, it's something to do with my virtual memory. I then proceed to try to the suggested solution which is to temper the registry and limit the page pool memory to 384MB. However, having done so, I still could not achieved it. I've seen screenshot settings of windows XP with 2GB having 384MB of page pool memory. My default settings puts it at 195MB whereas when I try to increase the pool limit, it can only go to a max of 229MB. I tried increasing my RAM capacity to 3GB but the pool limit still remains. I like to know how to increase my page pool memory. I've tried searching for solution but to no avail other than the one that I've mentioned above (which didn't solve my problem completely).

Read the article

Windows 7 VM log on lockout

- by AKa

My Windows 7 XP Mode virtual machine has just locked me out of password log on. Two years of use and it never required I use a password on wake up, I never asked for that. Suddenly yesterday, password required! I located password and used it successfully a couple of times, but now even that is not good enough! Perhaps (unfairly) because I tried to get to the bottom of the new phenomenon and removed the password from the user accounts? Permissions are still set to ok for all users. I have been all the way through the settings I can access with the VM file hibernated, and have deleted the previously saved log on info, which always previously worked automatically as charged. Now when I attempt to log on it asks me for credentials, seems like progress, but when I offer them, and check the "remember my credentials" box, I still get the splash screen "The system could not log you on. [reminder about caps...]" !! Round and round. Back up and restore point versions of the VM toss me back into the same log on loop. There are no other machines on any network, I am the administrator and sole user. It must be specifically about the log on, a speck of dust corruption ... is there a way around this? I tried creating a new VM but the black inner box gets stuck at one point requesting I insert a boot disc. Thanks for input, AKa

Read the article

Print over the internet from a remote linux session locally (on a Windows 7 machine) to the shared printers?

- by obeliksz

I'm trying to use a linux virtual machine as a file server for windows clients. I have successfully implemented remote file sharing (samba+ssh) with which I am able to print locally with a little program that I made for this purpose (jetforms style)... but I would like to hear about a somewhat more direct approach. How can I attach the printers to the server, so that I can for example open a file on the remote session and in the print dialogbox I would see my local printers (on the machine from which I have established a remote session)? I guess there should be some kind of putty tunneling, but dont know how. I have a windows 7 machine locally; there is a CentOS 6 VM over the internet. It has ssh, cups, and samba. I have found a question which asks the opposite: there is a windows based server to connect form linux but that windows has a domain, mine is just a simple windows workstation that is behind NAT and has a dynamic IP. That question is: Print from Linux to Windows networked printer.

Read the article

Can I host multiple sites with one Amazon EC2 instance [duplicate]

- by user22

This question already has an answer here: Can you help me with my capacity planning? 2 answers I currently have VPS server and I pay around $75 per month and I get: 40GB HD 2Gb RAM 100GB BW 6 core cpu (but i dont use much) I have only one live website running and traffic is only max 100 user visit per day. I mostly do the my testing stuff and some of my inter sites for playing with coding. But I do need one server. I am thinking of moving to Amazon EC2 if the price diff is not so much because then I can learn some more stuff. I am thinking of getting the 3 years Heavy utilization Reserved instance because my server will be running all day and night. I tried their online caluclator with Medium Instance Heavy reserved for 3 years for EC2 it comes $31 per month(effective price) and for EBS and S3 , I think even if thats it $40 for all other stuff. I will be at no loss for what I am getting at present. Am i correct or I missed something?? Now In my current VPS I have Apache for PHP sites and MOD wsgi for python sites. I am not sure if I will be able to do all that stuff in Amazon EC2. Can I host python and PHP sites both in Amazon EC2 instance using Named Virtual Hosts and Ngnix

Read the article

Computers on network crashing

- by Phil Cross

We have recently upgraded our network to Windows 7 clients with Windows server 2008 servers. The upgrade was completed by the end of September and until now has been fine (apart from the minor bugs). Recently (within the last 2 weeks) we've notice all computers on the network (around 1000) start to slow down to the point their unusable. It starts at about 08:45 and finishes at 09:15. Because of this, we think something may be broadcasting across the network. This happens every day, between these times. I cant use my computer at all at the slowdown peak, and looking at task managers performance graphs, Physical memory is hovering around 35% and CPU usage is at 0-10% (idle) yet still crashing. I've looked on DHCPs server log and cant see anything which stands out. The only change we made prior to the slowdown was installing adobe CS6 on some computers, however the slowdown affects computers without CS6. We have 2 physical machines, each with around 5-7 virtual machines running on them with ample memory. Does anyone have any suggestions as to what we can do to narrow down whats causing the crashes? Any help, suggestions or advice would be appreciated.

Read the article

How to provide users with isolated drive letters in Windows 2008 R2 (Terminal Server) [migrated]

- by Pierre

I need to be able to host several RDP sessions on a Terminal Server, where users of group A see a drive X: mapped to a given folder of the server and another group B see the same drive letter X: mapped to another folder. For instance : User 1, Group A X: --> C:\data\A User 2, Group A X: --> C:\data\A User 3, Group B X: --> C:\data\B User 4, Group C X: --> C:\data\C Is this possible. If so, how do I configure the virtual drive mapping so that the user has nothing special to do; i.e. I want the letter X: to be available to Remote Apps launched by the user, or if the user logs in to the remote desktop. Can I somehow use subst to get this to work? I would like to avoid, if possible, mounting drive letters on local shares (i.e. I don't like the idea of having to go through \\localhost\data-A to reach the user's data).

Read the article

vmware server 64 bit on ubuntu 9.10 64 bit with P2V windows 2003 SBS poor network speed

- by RobertHC

configuration is ubuntu 2.6.31-21 64 bit vmware 2.0.2 64 bit last release hardware is core 2 quad with 8GB ram guest is win 2003 server SBS 32 bit Dear friends, we have a converted physical to virtual windows sbs 2003, converted with last converter available nowadays http://www.vmware.com/products/converter/ vCenter converter. Running the P2V 2K3 SBS on vmware server, it does boot fine, but we do note an abnormal CPU activity and a poor lan speed. As attempts we did what follow. We removed all unneeded peripherals, we removed one NIC (phisycal server was 2 nics), we changed the vmx to ged the nic recognized as intel instead than amd, we removed 1 cpu (physical was 2 cpu), we removed anything was reported as failed driver from system events monitor. Nothing to do, no way and funny results. Let's read some tests results. All are made with the same file copied in different source folders. Copying from client side (both directions copy, to/from server) results are i.e. 10 seconds, copying the same files from server side (again from and to server) results are different... from client to server, speed is round about (bit more) 10 seconds, but from server to client direction is slower: double the time. Beeing very fast and launching a simultaneous copy "from server to client"+"from client to server", this made from the server side, results in a stuck traffic... 45 seconds to do the copy. vmware tools are installed and e1000 driver has been updated. With one processor CPU activity is still going up and down but much less than with two. Because of test, we installed win 2k8 STD 64 bit. We repeated all the above tests with exactly the same file result is just one: always 5 seconds (this matches the lan speed) Any idea about this issue is welcome and thank you if any. Kind regards R.

Read the article

Copy past speed very slow for a large number of files on Windows [closed]

- by Arno2501

I've run the following test I've created a folder containing 15'000 files of 400 bytes using this batch : @ECHO off SET times=15000 FOR /L %%i IN (1,1,%times%) DO ( fsutil file createnew filename%%i.txt 400 ) then I copy past it on my Windows Computer using this command : robocopy LargeNumberOfFiles\ LargeNumberOfFiles2\ After it has completed I can see that the transfer rate was 915810 Bytes/sec this is less than 1 MB/s. It took me several seconds to copy 7 MBytes Please note that this is very slow. I've tried the same with a folder with a single file of 50 Mbytes and the transfer rate is 1219512195 Bytes/sec. (yeah GB/s) instantaneous. Why copying large number of files take so much time - ressources on a windows filesystem ? Please note that I've tried to do the same on a linux system which runs on the same computer in a virtual machine (vmware player) with ext3 filesystem. I use the cp command and the copy is instantaneous ! Please also note the following : no antivirus I've tested that behaviour on multiple windows computers (always ntfs) i always get comparable results (transfer rate under 1MB/s avg 7-8 seconds to copy 7 MBytes) I've tested on multiple linux ext3 system the copy is always instantaneous for that amount (15000 files of 400 bytes) The question is about understanding what makes windows filesystem so slow to copy large number of files compared to a linux one for instance.

Read the article

Glassfish 3 Cant update JDK no way

- by Parhs

Hello.. I was using 1.6.0_19 jdk and installed 1.6.0_20 jdk.. Glassfish doesnt like that... Here are my windows environment variables.. ALLUSERSPROFILE=C:\ProgramData ANT_HOME=C:\apache-ant-1.8.1\ APPDATA=C:\Users\Parhs\AppData\Roaming CommonProgramFiles=C:\Program Files\Common Files COMPUTERNAME=PARHS-PC ComSpec=C:\Windows\system32\cmd.exe FP_NO_HOST_CHECK=NO HOMEDRIVE=C: HOMEPATH=\Users\Parhs JAVA_HOME=C:\Program Files\Java\jdk1.6.0_20\ LOCALAPPDATA=C:\Users\Parhs\AppData\Local LOGONSERVER=\\PARHS-PC NUMBER_OF_PROCESSORS=2 OS=Windows_NT Path=C:\Program Files\PHP\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wb em;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\Toshiba\Bluetoot h Toshiba Stack\sys\;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\apa che-ant-1.8.1\bin PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC PHPRC=C:\Program Files\PHP\php.ini PROCESSOR_ARCHITECTURE=x86 PROCESSOR_IDENTIFIER=x86 Family 6 Model 14 Stepping 8, GenuineIntel PROCESSOR_LEVEL=6 PROCESSOR_REVISION=0e08 ProgramData=C:\ProgramData ProgramFiles=C:\Program Files PROMPT=$P$G PSModulePath=C:\Windows\system32\WindowsPowerShell\v1.0\Modules\ PUBLIC=C:\Users\Public SESSIONNAME=Console SystemDrive=C: SystemRoot=C:\Windows TEMP=C:\Users\Parhs\AppData\Local\Temp TMP=C:\Users\Parhs\AppData\Local\Temp USERDOMAIN=Parhs-PC USERNAME=Parhs USERPROFILE=C:\Users\Parhs VS90COMNTOOLS=C:\Program Files\Microsoft Visual Studio 9.0\Common7\Tools\ windir=C:\Windows Also here is my asenv.bat REM DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER. REM REM Copyright 2004-2009 Sun Microsystems, Inc. All rights reserved. REM REM Use is subject to License Terms REM set AS_IMQ_LIB=....\mq\lib set AS_IMQ_BIN=....\mq\bin set AS_CONFIG=..\config set AS_INSTALL=.. set AS_DEF_DOMAINS_PATH=..\domains set AS_DERBY_INSTALL=....\javadb set AS_JAVA="C:\Program Files\Java\jdk1.6.0_20" And although restarting system and server i am getting this report Operating System Information: Name of the Operating System: Windows 7 Binary Architecture name of the Operating System: x86, Version: 6.1 Number of processors available on the Operating System: 2 System load on the available processors for the last minute: -1.0. (Sum of running and queued runnable entities per minute) General Java Runtime Environment Information for the VM: 6152@Parhs-PC JRE BootClassPath: C:\glassfishv3\glassfish/modules/endorsed\javax.annotation.jar;C:\glassfishv3\glassfish/modules/endorsed\jaxb-api-osgi.jar;C:\glassfishv3\glassfish/modules/endorsed\webservices-api-osgi.jar;C:\Program Files\Java\jdk1.6.0_19\jre\lib\resources.jar;C:\Program Files\Java\jdk1.6.0_19\jre\lib\rt.jar;C:\Program Files\Java\jdk1.6.0_19\jre\lib\sunrsasign.jar;C:\Program Files\Java\jdk1.6.0_19\jre\lib\jsse.jar;C:\Program Files\Java\jdk1.6.0_19\jre\lib\jce.jar;C:\Program Files\Java\jdk1.6.0_19\jre\lib\charsets.jar;C:\Program Files\Java\jdk1.6.0_19\jre\classes;C:\glassfishv3\glassfish\lib\monitor\btrace-boot.jar JRE ClassPath: C:\glassfishv3\glassfish\modules\glassfish.jar;C:\glassfishv3\glassfish\lib\monitor\btrace-agent.jar JRE Native Library Path: C:\Program Files\Java\jdk1.6.0_19\bin;.;C:\Windows\Sun\Java\bin;C:\Windows\system32;C:\Windows;C:\Program Files\PHP\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\Toshiba\Bluetooth Toshiba Stack\sys\;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\apache-ant-1.8.1\bin JRE name: Java HotSpot(TM) Client VM Vendor: Sun Microsystems Inc. Version: 16.2-b04 List of System Properties for the Java Virtual Machine: ANTLR_USE_DIRECT_CLASS_LOADING = true AS_CONFIG = C:\glassfishv3\glassfish\config\..\config AS_DEF_DOMAINS_PATH = C:\glassfishv3\glassfish\config\..\domains AS_DERBY_INSTALL = C:\glassfishv3\glassfish\config\..\..\javadb AS_IMQ_BIN = C:\glassfishv3\glassfish\config\..\..\mq\bin AS_IMQ_LIB = C:\glassfishv3\glassfish\config\..\..\mq\lib AS_INSTALL = C:\glassfishv3\glassfish\config\.. AS_JAVA = C:\Program Files\Java\jdk1.6.0_20\jre GlassFish_Platform = Felix awt.toolkit = sun.awt.windows.WToolkit catalina.base = C:\glassfishv3\glassfish\domains\domain1 catalina.home = C:\glassfishv3\glassfish\domains\domain1 catalina.useNaming = false com.sun.aas.configRoot = C:\glassfishv3\glassfish\config com.sun.aas.derbyRoot = C:\glassfishv3\javadb com.sun.aas.domainsRoot = C:\glassfishv3\glassfish\domains com.sun.aas.hostName = Parhs-PC com.sun.aas.imqBin = C:\glassfishv3\mq\bin com.sun.aas.imqLib = C:\glassfishv3\mq\lib com.sun.aas.installRoot = C:\glassfishv3\glassfish com.sun.aas.installRootURI = file:/C:/glassfishv3/glassfish/ com.sun.aas.instanceName = server com.sun.aas.instanceRoot = C:\glassfishv3\glassfish\domains\domain1 com.sun.aas.instanceRootURI = file:/C:/glassfishv3/glassfish/domains/domain1/ com.sun.aas.javaRoot = C:\Program Files\Java\jdk1.6.0_19\jre com.sun.enterprise.config.config_environment_factory_class = com.sun.enterprise.config.serverbeans.AppserverConfigEnvironmentFactory com.sun.enterprise.hk2.cacheDir = C:\glassfishv3\glassfish\domains\domain1\osgi-cache\felix com.sun.enterprise.jaccprovider.property.repository = C:\glassfishv3\glassfish\domains\domain1/generated/policy com.sun.enterprise.security.httpsOutboundKeyAlias = s1as common.loader = ${catalina.home}/common/classes,${catalina.home}/common/endorsed/*.jar,${catalina.home}/common/lib/*.jar eclipselink.security.usedoprivileged = true ejb.home = C:\glassfishv3\glassfish\modules\ejb felix.config.properties = file:/C:/glassfishv3/glassfish/osgi/felix/conf/config.properties felix.fileinstall.bundles.new.start = true felix.fileinstall.debug = 1 felix.fileinstall.dir = C:\glassfishv3\glassfish/modules/autostart/ felix.fileinstall.poll = 5000 felix.system.properties = file:/C:/glassfishv3/glassfish/osgi/felix/conf/system.properties file.encoding = Cp1253 file.encoding.pkg = sun.io file.separator = \ glassfish.version = GlassFish v3 (build 74.2) hk2.startup.context.args = #Mon Jun 07 20:27:37 EEST 2010 -startup-classpath=C\:\\glassfishv3\\glassfish\\modules\\glassfish.jar;C\:\\glassfishv3\\glassfish\\lib\\monitor\\btrace-agent.jar __time_zero=1275931657334 hk2.startup.context.mainModule=org.glassfish.core.kernel -startup-args=--domain,,,domain1,,,--domaindir,,,C\:\\glassfishv3\\glassfish\\domains\\domain1 --domain=domain1 -startup-classname=com.sun.enterprise.glassfish.bootstrap.ASMain --domaindir=C\:\\glassfishv3\\glassfish\\domains\\domain1 hk2.startup.context.root = C:\glassfishv3\glassfish\modules http.nonProxyHosts = localhost|127.0.0.1|Parhs-PC java.awt.graphicsenv = sun.awt.Win32GraphicsEnvironment java.awt.printerjob = sun.awt.windows.WPrinterJob java.class.path = C:\glassfishv3\glassfish\modules\glassfish.jar;C:\glassfishv3\glassfish\lib\monitor\btrace-agent.jar java.class.version = 50.0 java.endorsed.dirs = C:\glassfishv3\glassfish/modules/endorsed;C:\glassfishv3\glassfish/lib/endorsed java.ext.dirs = C:\Program Files\Java\jdk1.6.0_19\jre/lib/ext;C:\Program Files\Java\jdk1.6.0_19\jre/jre/lib/ext;C:\glassfishv3\glassfish\domains\domain1/lib/ext java.home = C:\Program Files\Java\jdk1.6.0_19\jre java.io.tmpdir = C:\Users\Parhs\AppData\Local\Temp\ java.library.path = C:\Program Files\Java\jdk1.6.0_19\bin;.;C:\Windows\Sun\Java\bin;C:\Windows\system32;C:\Windows;C:\Program Files\PHP\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\Toshiba\Bluetooth Toshiba Stack\sys\;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\apache-ant-1.8.1\bin java.net.useSystemProxies = true java.rmi.server.randomIDs = true java.runtime.name = Java(TM) SE Runtime Environment java.runtime.version = 1.6.0_19-b04 java.security.auth.login.config = C:\glassfishv3\glassfish\domains\domain1/config/login.conf java.security.policy = C:\glassfishv3\glassfish\domains\domain1/config/server.policy java.specification.name = Java Platform API Specification java.specification.vendor = Sun Microsystems Inc. java.specification.version = 1.6 java.util.logging.config.file = C:\glassfishv3\glassfish\domains\domain1\config\logging.properties java.vendor = Sun Microsystems Inc. java.vendor.url = http://java.sun.com/ java.vendor.url.bug = http://java.sun.com/cgi-bin/bugreport.cgi java.version = 1.6.0_19 java.vm.info = mixed mode java.vm.name = Java HotSpot(TM) Client VM java.vm.specification.name = Java Virtual Machine Specification java.vm.specification.vendor = Sun Microsystems Inc. java.vm.specification.version = 1.0 java.vm.vendor = Sun Microsystems Inc. java.vm.version = 16.2-b04 javax.net.ssl.keyStore = C:\glassfishv3\glassfish\domains\domain1/config/keystore.jks javax.net.ssl.keyStorePassword = changeit javax.net.ssl.trustStore = C:\glassfishv3\glassfish\domains\domain1/config/cacerts.jks javax.net.ssl.trustStorePassword = changeit javax.rmi.CORBA.PortableRemoteObjectClass = com.sun.corba.ee.impl.javax.rmi.PortableRemoteObject javax.rmi.CORBA.StubClass = com.sun.corba.ee.impl.javax.rmi.CORBA.StubDelegateImpl javax.rmi.CORBA.UtilClass = com.sun.corba.ee.impl.javax.rmi.CORBA.Util javax.security.jacc.PolicyConfigurationFactory.provider = com.sun.enterprise.security.provider.PolicyConfigurationFactoryImpl jdbc.drivers = org.apache.derby.jdbc.ClientDriver jpa.home = C:\glassfishv3\glassfish\modules\jpa line.separator = org.glassfish.web.rfc2109_cookie_names_enforced = false org.jvnet.hk2.osgimain.autostartBundles = osgi-adapter.jar, org.apache.felix.shell.jar, org.apache.felix.shell.remote.jar, org.apache.felix.configadmin.jar, org.apache.felix.fileinstall.jar org.jvnet.hk2.osgimain.bundlesDir = C:\glassfishv3\glassfish\modules org.jvnet.hk2.osgimain.excludedSubDirs = autostart/ org.omg.CORBA.ORBClass = com.sun.corba.ee.impl.orb.ORBImpl org.omg.CORBA.ORBSingletonClass = com.sun.corba.ee.impl.orb.ORBSingleton org.osgi.framework.storage = C:\glassfishv3\glassfish\domains\domain1\osgi-cache\felix os.arch = x86 os.name = Windows 7 os.version = 6.1 osgi.shell.telnet.ip = 127.0.0.1 osgi.shell.telnet.maxconn = 1 osgi.shell.telnet.port = 6666 package.access = package.definition = path.separator = ; security.home = C:\glassfishv3\glassfish\modules\security server.loader = ${catalina.home}/server/classes,${catalina.home}/server/lib/*.jar shared.loader = ${catalina.home}/shared/classes,${catalina.home}/shared/lib/*.jar sun.arch.data.model = 32 sun.boot.class.path = C:\glassfishv3\glassfish/modules/endorsed\javax.annotation.jar;C:\glassfishv3\glassfish/modules/endorsed\jaxb-api-osgi.jar;C:\glassfishv3\glassfish/modules/endorsed\webservices-api-osgi.jar;C:\Program Files\Java\jdk1.6.0_19\jre\lib\resources.jar;C:\Program Files\Java\jdk1.6.0_19\jre\lib\rt.jar;C:\Program Files\Java\jdk1.6.0_19\jre\lib\sunrsasign.jar;C:\Program Files\Java\jdk1.6.0_19\jre\lib\jsse.jar;C:\Program Files\Java\jdk1.6.0_19\jre\lib\jce.jar;C:\Program Files\Java\jdk1.6.0_19\jre\lib\charsets.jar;C:\Program Files\Java\jdk1.6.0_19\jre\classes;C:\glassfishv3\glassfish\lib\monitor\btrace-boot.jar sun.boot.library.path = C:\Program Files\Java\jdk1.6.0_19\jre\bin sun.cpu.endian = little sun.cpu.isalist = pentium_pro+mmx pentium_pro pentium+mmx pentium i486 i386 i86 sun.desktop = windows sun.io.unicode.encoding = UnicodeLittle sun.java.launcher = SUN_STANDARD sun.jnu.encoding = Cp1253 sun.management.compiler = HotSpot Client Compiler sun.os.patch.level = user.country = GR user.dir = C:\glassfishv3\glassfish\domains\domain1 user.home = C:\Users\Parhs user.language = el user.name = Parhs user.timezone = Europe/Athens user.variant = web.home = C:\glassfishv3\glassfish\modules\web weld.home = C:\glassfishv3\glassfish\modules\weld Why it is so damn hard??? What am i missing?

Read the article

Reflect.Emit Dynamic Type Memory Blowup

- by Firestrand

Using C# 3.5 I am trying to generate dynamic types at runtime using reflection emit. I used the Dynamic Query Library sample from Microsoft to create a class generator. Everything works, my problem is that 100 generated types inflate the memory usage by approximately 25MB. This is a completely unacceptable memory profile as eventually I want to support having several hundred thousand types generated in memory. Memory profiling shows that the memory is apparently being held by various System.Reflection.Emit types and methods though I can't figure out why. I haven't found others talking about this problem so I am hoping someone in this community either knows what I am doing wrong or if this is expected behavior. Contrived Example below: using System; using System.Collections.Generic; using System.Text; using System.Reflection; using System.Reflection.Emit; namespace SmallRelfectExample { class Program { static void Main(string[] args) { int typeCount = 100; int propCount = 100; Random rand = new Random(); Type dynType = null; for (int i = 0; i < typeCount; i++) { List<DynamicProperty> dpl = new List<DynamicProperty>(propCount); for (int j = 0; j < propCount; j++) { dpl.Add(new DynamicProperty("Key" + rand.Next().ToString(), typeof(String))); } SlimClassFactory scf = new SlimClassFactory(); dynType = scf.CreateDynamicClass(dpl.ToArray(), i); //Optionally do something with the type here } Console.WriteLine("SmallRelfectExample: {0} Types generated.", typeCount); Console.ReadLine(); } } public class SlimClassFactory { private readonly ModuleBuilder module; public SlimClassFactory() { AssemblyName name = new AssemblyName("DynamicClasses"); AssemblyBuilder assembly = AppDomain.CurrentDomain.DefineDynamicAssembly(name, AssemblyBuilderAccess.Run); module = assembly.DefineDynamicModule("Module"); } public Type CreateDynamicClass(DynamicProperty[] properties, int Id) { string typeName = "DynamicClass" + Id.ToString(); TypeBuilder tb = module.DefineType(typeName, TypeAttributes.Class | TypeAttributes.Public, typeof(DynamicClass)); FieldInfo[] fields = GenerateProperties(tb, properties); GenerateEquals(tb, fields); GenerateGetHashCode(tb, fields); Type result = tb.CreateType(); return result; } static FieldInfo[] GenerateProperties(TypeBuilder tb, DynamicProperty[] properties) { FieldInfo[] fields = new FieldBuilder[properties.Length]; for (int i = 0; i < properties.Length; i++) { DynamicProperty dp = properties[i]; FieldBuilder fb = tb.DefineField("_" + dp.Name, dp.Type, FieldAttributes.Private); PropertyBuilder pb = tb.DefineProperty(dp.Name, PropertyAttributes.HasDefault, dp.Type, null); MethodBuilder mbGet = tb.DefineMethod("get_" + dp.Name, MethodAttributes.Public | MethodAttributes.SpecialName | MethodAttributes.HideBySig, dp.Type, Type.EmptyTypes); ILGenerator genGet = mbGet.GetILGenerator(); genGet.Emit(OpCodes.Ldarg_0); genGet.Emit(OpCodes.Ldfld, fb); genGet.Emit(OpCodes.Ret); MethodBuilder mbSet = tb.DefineMethod("set_" + dp.Name, MethodAttributes.Public | MethodAttributes.SpecialName | MethodAttributes.HideBySig, null, new Type[] { dp.Type }); ILGenerator genSet = mbSet.GetILGenerator(); genSet.Emit(OpCodes.Ldarg_0); genSet.Emit(OpCodes.Ldarg_1); genSet.Emit(OpCodes.Stfld, fb); genSet.Emit(OpCodes.Ret); pb.SetGetMethod(mbGet); pb.SetSetMethod(mbSet); fields[i] = fb; } return fields; } static void GenerateEquals(TypeBuilder tb, FieldInfo[] fields) { MethodBuilder mb = tb.DefineMethod("Equals", MethodAttributes.Public | MethodAttributes.ReuseSlot | MethodAttributes.Virtual | MethodAttributes.HideBySig, typeof(bool), new Type[] { typeof(object) }); ILGenerator gen = mb.GetILGenerator(); LocalBuilder other = gen.DeclareLocal(tb); Label next = gen.DefineLabel(); gen.Emit(OpCodes.Ldarg_1); gen.Emit(OpCodes.Isinst, tb); gen.Emit(OpCodes.Stloc, other); gen.Emit(OpCodes.Ldloc, other); gen.Emit(OpCodes.Brtrue_S, next); gen.Emit(OpCodes.Ldc_I4_0); gen.Emit(OpCodes.Ret); gen.MarkLabel(next); foreach (FieldInfo field in fields) { Type ft = field.FieldType; Type ct = typeof(EqualityComparer<>).MakeGenericType(ft); next = gen.DefineLabel(); gen.EmitCall(OpCodes.Call, ct.GetMethod("get_Default"), null); gen.Emit(OpCodes.Ldarg_0); gen.Emit(OpCodes.Ldfld, field); gen.Emit(OpCodes.Ldloc, other); gen.Emit(OpCodes.Ldfld, field); gen.EmitCall(OpCodes.Callvirt, ct.GetMethod("Equals", new Type[] { ft, ft }), null); gen.Emit(OpCodes.Brtrue_S, next); gen.Emit(OpCodes.Ldc_I4_0); gen.Emit(OpCodes.Ret); gen.MarkLabel(next); } gen.Emit(OpCodes.Ldc_I4_1); gen.Emit(OpCodes.Ret); } static void GenerateGetHashCode(TypeBuilder tb, FieldInfo[] fields) { MethodBuilder mb = tb.DefineMethod("GetHashCode", MethodAttributes.Public | MethodAttributes.ReuseSlot | MethodAttributes.Virtual | MethodAttributes.HideBySig, typeof(int), Type.EmptyTypes); ILGenerator gen = mb.GetILGenerator(); gen.Emit(OpCodes.Ldc_I4_0); foreach (FieldInfo field in fields) { Type ft = field.FieldType; Type ct = typeof(EqualityComparer<>).MakeGenericType(ft); gen.EmitCall(OpCodes.Call, ct.GetMethod("get_Default"), null); gen.Emit(OpCodes.Ldarg_0); gen.Emit(OpCodes.Ldfld, field); gen.EmitCall(OpCodes.Callvirt, ct.GetMethod("GetHashCode", new Type[] { ft }), null); gen.Emit(OpCodes.Xor); } gen.Emit(OpCodes.Ret); } } public abstract class DynamicClass { public override string ToString() { PropertyInfo[] props = GetType().GetProperties(BindingFlags.Instance | BindingFlags.Public); StringBuilder sb = new StringBuilder(); sb.Append("{"); for (int i = 0; i < props.Length; i++) { if (i > 0) sb.Append(", "); sb.Append(props[i].Name); sb.Append("="); sb.Append(props[i].GetValue(this, null)); } sb.Append("}"); return sb.ToString(); } } public class DynamicProperty { private readonly string name; private readonly Type type; public DynamicProperty(string name, Type type) { if (name == null) throw new ArgumentNullException("name"); if (type == null) throw new ArgumentNullException("type"); this.name = name; this.type = type; } public string Name { get { return name; } } public Type Type { get { return type; } } } }

Read the article

C++ Multithreading with pthread is blocking (including sockets)

- by Sebastian Büttner

I am trying to implement a multi threaded application with pthread. I did implement a thread class which looks like the following and I call it later twice (or even more), but it seems to block instead of execute the threads parallel. Here is what I got until now: The Thread Class is an abstract class which has the abstract method "exec" which should contain the thread code in a derive class (I did a sample of this, named DerivedThread) Thread.hpp #ifndef THREAD_H_ #define THREAD_H_ #include <pthread.h> class Thread { public: Thread(); void start(); void join(); virtual int exec() = 0; int exit_code(); private: static void* thread_router(void* arg); void exec_thread(); pthread_t pth_; int code_; }; #endif /* THREAD_H_ */ And Thread.cpp #include <iostream> #include "Thread.hpp" /*****************************/ using namespace std; Thread::Thread(): code_(0) { cout << "[Thread] Init" << endl; } void Thread::start() { cout << "[Thread] Created Thread" << endl; pthread_create( &pth_, NULL, Thread::thread_router, reinterpret_cast<void*>(this)); } void Thread::join() { cout << "[Thread] Join Thread" << endl; pthread_join(pth_, NULL); } int Thread::exit_code() { return code_; } void Thread::exec_thread() { cout << "[Thread] Execute" << endl; code_ = exec(); } void* Thread::thread_router(void* arg) { cout << "[Thread] exec_thread function in thread" << endl; reinterpret_cast<Thread*>(arg)->exec_thread(); return NULL; } DerivedThread.hpp #include "Thread.hpp" class DerivedThread : public Thread { public: DerivedThread(); virtual ~DerivedThread(); int exec(); void Close() = 0; DerivedThread.cpp [...] #include "DerivedThread.cpp" [...] int DerivedThread::exec() { //code to be executed do { cout << "Thread executed" << endl; usleep(1000000); } while (true); //dummy, just to let it run for a while } [...] Basically, I am calling this like the here: DerivedThread *thread; cout << "Creating Thread" << endl; thread = new DerivedThread(); cout << "Created thread, starting..." << endl; thread->start(); cout << "Started thread" << endl; cout << "Creating 2nd Thread" << endl; thread = new DerivedThread(); cout << "Created 2nd thread, starting..." << endl; thread->start(); cout << "Started 2nd thread" << endl; What is working great if I am only starting one of these Threads , but if I start multiple which should run together (not synced, only parallel) . But I discovered, that the thread is created, then as it tries to execute it (via start) the problem seems to block until the thread has closed. After that the next Thread is processed. I thought that pthread would do it unblocked for me, so what did I wrong? A sample output might be: Creating Thread [Thread] Thread Init Created thread, starting... [Thread] Created thread [Thread] exec_thread function in thread [Thread] Execute Thread executed Thread executed Thread executed Thread executed Thread executed Thread executed Thread executed .... Until Thread 1 is not terminated, a Thread 2 won't be created not executed. The process above is executed in an other class. Just for the information: I am trying to create a multi threaded server. The concept is like this: MultiThreadedServer Class has a main loop, like this one: ::inet::ServerSock *sock; //just a simple self made wrapper class for sockets DerivedThread *thread; for (;;) { sock = new ::inet::ServerSock(); this->Socket->accept( *sock ); cout << "Creating Thread" << endl; //Threads (according to code sample above) thread = new DerivedThread(sock); //I did not mentoine the parameter before as it was not neccesary, in fact, I pass the socket handle with the connected socket to the thread cout << "Created thread, starting..." << endl; thread->start(); cout << "Started thread" << endl; } So I thought that this would loop over and over and wait for new connections to accept. and when a new client arrives, I am creating a new thread and give the thread the connected socket as a parameter. In the DerivedThread::exec I am doing the handling for the connected client. Like: [...] do { [...] if (this-sock_-read( Buffer, sizeof(PacketStruc) ) 0) { cout << "[Handler_Base] Recv Packet" << endl; //handle the packet } else { Connected = false; } delete Buffer; } while ( Connected ); So I loop in the created thread as long as the client keeps the connection. I think, that the socket may cause the blocking behaviour. Edit: I figured out, that it is not the read() loop in the DerivedThread Class as I simply replaced it with a loop over a simple cout-usleep part. It did also only execute the first one and after first thread finished, the 2nd one was executed. Many thanks and best regards, Sebastian

Read the article

Managing the layout of a Java MainFrame of Canvas3d

- by John N

Hi, Im trying to organise the layout of four canvas3d objects in a single MainFrame. Iv tried using some layout managers but none are working (or im doing it wrong). Can anyone give me advice or point me to a way to get this to display the four canvas's as a grid of four? Thanks, John public class Main { public static void Main(){ Window win = new Window(); } } import javax.media.j3d.BranchGroup; import javax.media.j3d.Canvas3D; import javax.media.j3d.Locale; import javax.media.j3d.PhysicalBody; import javax.media.j3d.PhysicalEnvironment; import javax.media.j3d.Transform3D; import javax.media.j3d.TransformGroup; import javax.media.j3d.View; import javax.media.j3d.ViewPlatform; import javax.media.j3d.VirtualUniverse; import javax.vecmath.Vector3f; import com.sun.j3d.utils.picking.PickCanvas; public class Universe { boolean camera = true; Canvas3D canvas1, canvas2, canvas3, canvas4; VirtualUniverse universe; Locale locale; TransformGroup vpTrans1, vpTransRight, vpTransFront, vpTransPers; TransformGroup mouseTransform = null; View view1, view2, view3, view4; BranchGroup scene; PickCanvas pickCanvas1 = null; PickCanvas pickCanvas2 = null; PickCanvas pickCanvas3 = null; PickCanvas pickCanvas4 = null; BranchGroup obj = new BranchGroup(); // Create a BranchGroup node for the view platform BranchGroup vpRoot = new BranchGroup(); //Temp vars for cam movement public Universe(Canvas3D c1, Canvas3D c2, Canvas3D c3, Canvas3D c4, BranchGroup scene) { this.canvas1 = c1; this.canvas2 = c2; this.canvas3 = c3; this.canvas4 = c4; this.scene = scene; // Establish a virtual universe that has a single // hi-res Locale universe = new VirtualUniverse(); locale = new Locale(universe); // Create a PhysicalBody and PhysicalEnvironment object PhysicalBody body = new PhysicalBody(); PhysicalEnvironment environment = new PhysicalEnvironment(); // Create a View and attach the Canvas3D and the physical // body and environment to the view. view1 = new View(); view1.addCanvas3D(c1); view1.addCanvas3D(c2); view1.addCanvas3D(c3); view1.addCanvas3D(c4); view1.setPhysicalBody(body); view1.setPhysicalEnvironment(environment); // Create a BranchGroup node for the view platform BranchGroup vpRoot = new BranchGroup(); // Create a ViewPlatform object, and its associated // TransformGroup object, and attach it to the root of the // subgraph. Attach the view to the view platform. Transform3D t = new Transform3D(); t.set(new Vector3f(0.0f, 0.0f, 2.0f)); ViewPlatform vp = new ViewPlatform(); vpTrans1 = new TransformGroup(t); vpTrans1.addChild(vp); vpRoot.addChild(vpTrans1); vpRoot.addChild(scene); view1.attachViewPlatform(vp); // Attach the branch graph to the universe, via the // Locale. The scene graph is now live! locale.addBranchGraph(vpRoot); } } import javax.media.j3d.BranchGroup; import javax.media.j3d.Canvas3D; import javax.media.j3d.Locale; import javax.media.j3d.PhysicalBody; import javax.media.j3d.PhysicalEnvironment; import javax.media.j3d.Transform3D; import javax.media.j3d.TransformGroup; import javax.media.j3d.View; import javax.media.j3d.ViewPlatform; import javax.media.j3d.VirtualUniverse; import javax.vecmath.Vector3f; import com.sun.j3d.utils.picking.PickCanvas; public class Universe { boolean camera = true; Canvas3D canvas1, canvas2, canvas3, canvas4; VirtualUniverse universe; Locale locale; TransformGroup vpTrans1, vpTransRight, vpTransFront, vpTransPers; TransformGroup mouseTransform = null; View view1, view2, view3, view4; BranchGroup scene; PickCanvas pickCanvas1 = null; PickCanvas pickCanvas2 = null; PickCanvas pickCanvas3 = null; PickCanvas pickCanvas4 = null; BranchGroup obj = new BranchGroup(); // Create a BranchGroup node for the view platform BranchGroup vpRoot = new BranchGroup(); //Temp vars for cam movement public Universe(Canvas3D c1, Canvas3D c2, Canvas3D c3, Canvas3D c4, BranchGroup scene) { this.canvas1 = c1; this.canvas2 = c2; this.canvas3 = c3; this.canvas4 = c4; this.scene = scene; // Establish a virtual universe that has a single // hi-res Locale universe = new VirtualUniverse(); locale = new Locale(universe); // Create a PhysicalBody and PhysicalEnvironment object PhysicalBody body = new PhysicalBody(); PhysicalEnvironment environment = new PhysicalEnvironment(); // Create a View and attach the Canvas3D and the physical // body and environment to the view. view1 = new View(); view1.addCanvas3D(c1); view1.addCanvas3D(c2); view1.addCanvas3D(c3); view1.addCanvas3D(c4); view1.setPhysicalBody(body); view1.setPhysicalEnvironment(environment); // Create a BranchGroup node for the view platform BranchGroup vpRoot = new BranchGroup(); // Create a ViewPlatform object, and its associated // TransformGroup object, and attach it to the root of the // subgraph. Attach the view to the view platform. Transform3D t = new Transform3D(); t.set(new Vector3f(0.0f, 0.0f, 2.0f)); ViewPlatform vp = new ViewPlatform(); vpTrans1 = new TransformGroup(t); vpTrans1.addChild(vp); vpRoot.addChild(vpTrans1); vpRoot.addChild(scene); view1.attachViewPlatform(vp); // Attach the branch graph to the universe, via the // Locale. The scene graph is now live! locale.addBranchGraph(vpRoot); } }

Read the article

C++ simple logging class with UTF-8 output [code example]

- by Andrew

Hello everyone, I was working on one of my academic projects and for the first time I needed pure C++ without GUI. After googling for a while, I did not find any simple and easy to use implementation for logging and created my own. This is a simple implementation with iostreams that logs messages to screen and to the file simultaneously. I was thinking of using templates but then I realized that I do not expect any changes and removed that. It is modified std::wostream with two added modifiers: 1. TimeStamp - prints time-stamp 2. LogMode(LogModes) - switches output: file only, screen only, file+screen. *Boost::utf8_codecvt_facet* is used for UTF-8 output. // ############################################################################ // # Name: MyLog.h # // # Purpose: Logging Class Header # // # Author: Andrew Drach # // # Modified by: <somebody> # // # Created: 03/21/10 # // # SVN-ID: $Id$ # // # Copyright: (c) 2010 Andrew Drach # // # Licence: <license> # // ############################################################################ #ifndef INCLUDED_MYLOG_H #define INCLUDED_MYLOG_H // headers -------------------------------------------------------------------- #include <string> #include <iostream> #include <fstream> #include <exception> #include <boost/program_options/detail/utf8_codecvt_facet.hpp> using namespace std; // definitions ---------------------------------------------------------------- // ---------------------------------------------------------------------------- // DblBuf class // Splits up output stream into two // Inspired by http://wordaligned.org/articles/cpp-streambufs // ---------------------------------------------------------------------------- class DblBuf : public wstreambuf { private: // private member declarations DblBuf(); wstreambuf *bf1; wstreambuf *bf2; virtual int_type overflow(int_type ch) { int_type eof = traits_type::eof(); int_type not_eof = !eof; if ( traits_type::eq_int_type(ch,eof) ) return not_eof; else { char_type ch1 = traits_type::to_char_type(ch); int_type r1( bf1on ? bf1->sputc(ch1) : not_eof ); int_type r2( bf2on ? bf2->sputc(ch1) : not_eof ); return (traits_type::eq_int_type(r1,eof) || traits_type::eq_int_type(r2,eof) ) ? eof : ch; } } virtual int sync() { int r1( bf1on ? bf1->pubsync() : NULL ); int r2( bf2on ? bf2->pubsync() : NULL ); return (r1 == 0 && r2 == 0) ? 0 : -1; } public: // public member declarations explicit DblBuf(wstreambuf *bf1, wstreambuf *bf2) : bf1(bf1), bf2(bf2) { if (bf1) bf1on = true; else bf1on = false; if (bf2) bf2on = true; else bf2on = false; } bool bf1on; bool bf2on; }; // ---------------------------------------------------------------------------- // logstream class // Wrapper for a standard wostream with access to modified buffer // ---------------------------------------------------------------------------- class logstream : public wostream { private: // private member declarations logstream(); public: // public member declarations DblBuf *buf; explicit logstream(wstreambuf *StrBuf, bool isStd = false) : wostream(StrBuf, isStd), buf((DblBuf*)StrBuf) {} }; // ---------------------------------------------------------------------------- // Logging mode Class // ---------------------------------------------------------------------------- enum LogModes{LogToFile=1, LogToScreen, LogToBoth}; class LogMode { private: // private member declarations LogMode(); short mode; public: // public member declarations LogMode(short mode1) : mode(mode1) {} logstream& operator()(logstream &stream1) { switch(mode) { case LogToFile: stream1.buf->bf1on = true; stream1.buf->bf2on = false; break; case LogToScreen: stream1.buf->bf1on = false; stream1.buf->bf2on = true; break; case LogToBoth: stream1.buf->bf1on = true; stream1.buf->bf2on = true; } return stream1; } }; logstream& operator<<(logstream &out, LogMode mode) { return mode(out); } wostream& TimeStamp1(wostream &out1) { time_t time1; struct tm timeinfo; wchar_t timestr[512]; // Get current time and convert it to a string time(&time1); localtime_s (&timeinfo, &time1); wcsftime(timestr, 512,L"[%Y-%b-%d %H:%M:%S %p] ",&timeinfo); return out1 << timestr; } // ---------------------------------------------------------------------------- // MyLog class // Logs events to both file and screen // ---------------------------------------------------------------------------- class MyLog { private: // private member declarations MyLog(); auto_ptr<DblBuf> buf; string mErrorMsg1; string mErrorMsg2; string mErrorMsg3; string mErrorMsg4; public: // public member declarations explicit MyLog(string FileName1, wostream *ScrLog1, locale utf8locale1); ~MyLog(); void NewEvent(wstring str1, bool TimeStamp = true); string FileName; wostream *ScrLog; wofstream File; auto_ptr<logstream> Log; locale utf8locale; }; // ---------------------------------------------------------------------------- // MyLog constructor // ---------------------------------------------------------------------------- MyLog::MyLog(string FileName1, wostream *ScrLog1, locale utf8locale1) : // ctors mErrorMsg1("Failed to open file for application logging! []"), mErrorMsg2("Failed to write BOM! []"), mErrorMsg3("Failed to write to file! []"), mErrorMsg4("Failed to close file! []"), FileName(FileName1), ScrLog(ScrLog1), utf8locale(utf8locale1), File(FileName1.c_str()) { // Adjust error strings mErrorMsg1.insert(mErrorMsg1.length()-1,FileName1); mErrorMsg2.insert(mErrorMsg2.length()-1,FileName1); mErrorMsg3.insert(mErrorMsg3.length()-1,FileName1); mErrorMsg4.insert(mErrorMsg4.length()-1,FileName1); // check for file open errors if ( !File ) throw ofstream::failure(mErrorMsg1); // write UTF-8 BOM File << wchar_t(0xEF) << wchar_t(0xBB) << wchar_t(0xBF); // switch locale to UTF-8 File.imbue(utf8locale); // check for write errors if ( File.bad() ) throw ofstream::failure(mErrorMsg2); buf.reset( new DblBuf(File.rdbuf(),ScrLog->rdbuf()) ); Log.reset( new logstream(&*buf) ); } // ---------------------------------------------------------------------------- // MyLog destructor // ---------------------------------------------------------------------------- MyLog::~MyLog() { *Log << TimeStamp1 << "Log finished." << endl; // clean up objects Log.reset(); buf.reset(); File.close(); // check for file close errors if ( File.bad() ) throw ofstream::failure(mErrorMsg4); } //--------------------------------------------------------------------------- #endif // INCLUDED_MYLOG_H Tested on MSVC 2008, boost 1.42. I do not know if this is the right place to share it. Hope it helps anybody. Feel free to make it better.

Read the article

MVC4 Model in View has nested data - cannot get data in model

- by Taersious

I have a Model defined that gets me a View with a list of RadioButtons, per IEnumerable. Within that Model, I want to display a list of checkboxes that will vary based on the item selected. Finally, there will be a Textarea in the same view once the user has selected from the available checkboxes, with some dynamic text there based on the CheckBoxes that are selected. What we should end up with is a Table-per-hierarchy. The layout is such that the RadioButtonList is in the first table cell, the CheckBoxList is in the middle table cell, and the Textarea is ini the right table cell. If anyone can guide me to what my model-view should be to achieve this result, I'll be most pleased... Here are my codes: // // View Model for implementing radio button list public class RadioButtonViewModel { // objects public List<RadioButtonItem> RadioButtonList { get; set; } public string SelectedRadioButton { get; set; } } // // Object for handling each radio button public class RadioButtonItem { // this object public string Name { get; set; } public bool Selected { get; set; } public int ObjectId { get; set; } // columns public virtual IEnumerable<CheckBoxItem> CheckBoxItems { get; set; } } // // Object for handling each checkbox public class CheckBoxViewModel { public List<CheckBoxItem> CheckBoxList { get; set; } } // // Object for handling each check box public class CheckBoxItem { public string Name { get; set; } public bool Selected { get; set; } public int ObjectId { get; set; } public virtual RadioButtonItem RadioButtonItem { get; set; } } and the view @model IEnumerable<EF_Utility.Models.RadioButtonItem> @{ ViewBag.Title = "Connect"; ViewBag.Selected = Request["name"] != null ? Request["name"].ToString() : ""; } @using (Html.BeginForm("Objects" , "Home", FormMethod.Post) ){ @Html.ValidationSummary(true) <table> <tbody> <tr> <td style="border: 1px solid grey; vertical-align:top;"> <table> <tbody> <tr> <th style="text-align:left; width: 50px;">Select</th> <th style="text-align:left;">View or Table Name</th> </tr> @{ foreach (EF_Utility.Models.RadioButtonItem item in @Model ) { <tr> <td> @Html.RadioButton("RadioButtonViewModel.SelectedRadioButton", item.Name, ViewBag.Selected == item.Name ? true : item.Selected, new { @onclick = "this.form.action='/Home/Connect?name=" + item.Name + "'; this.form.submit(); " }) </td> <td> @Html.DisplayFor(i => item.Name) </td> </tr> } } </tbody> </table> </td> <td style="border: 1px solid grey; width: 220px; vertical-align:top; @(ViewBag.Selected == "" ? "display:none;" : "")"> <table> <tbody> <tr> <th>Column </th> </tr> <tr> <td> </td> </tr> </tbody> </table> </td> <td style="border: 1px solid grey; vertical-align:top; @(ViewBag.Selected == "" ? "display:none;" : "")"> <textarea name="output" id="output" rows="24" cols="48"></textarea> </td> </tr> </tbody> </table> } and the relevant controller public ActionResult Connect() { /* TEST SESSION FIRST*/ if( Session["connstr"] == null) return RedirectToAction("Index"); else { ViewBag.Message = ""; ViewBag.ConnectionString = Server.UrlDecode( Session["connstr"].ToString() ); ViewBag.Server = ParseConnectionString( ViewBag.ConnectionString, "Data Source" ); ViewBag.Database = ParseConnectionString( ViewBag.ConnectionString, "Initial Catalog" ); using( var db = new SysDbContext(ViewBag.ConnectionString)) { var objects = db.Set<SqlObject>().ToArray(); var model = objects .Select( o => new RadioButtonItem { Name = o.Name, Selected = false, ObjectId = o.Object_Id, CheckBoxItems = Enumerable.Empty<EF_Utility.Models.CheckBoxItem>() } ) .OrderBy( rb => rb.Name ); return View( model ); } } } What I am missing it seems, is the code in my Connect() method that will bring the data context forward; at that point, it should be fairly straight-forward to set up the Html for the View. EDIT ** So I am going to need to bind the RadioButtonItem to the view with something like the following, except my CheckBoxList will NOT be an empty set. // // POST: /Home/Connect/ [HttpPost] public ActionResult Connect( RadioButtonItem rbl ) { /* TEST SESSION FIRST*/ if ( Session["connstr"] == null ) return RedirectToAction( "Index" ); else { ViewBag.Message = ""; ViewBag.ConnectionString = Server.UrlDecode( Session["connstr"].ToString() ); ViewBag.Server = ParseConnectionString( ViewBag.ConnectionString, "Data Source" ); ViewBag.Database = ParseConnectionString( ViewBag.ConnectionString, "Initial Catalog" ); using ( var db = new SysDbContext( ViewBag.ConnectionString ) ) { var objects = db.Set<SqlObject>().ToArray(); var model = objects .Select( o => new RadioButtonItem { Name = o.Name, Selected = false, ObjectId = o.Object_Id, CheckBoxItems = Enumerable.Empty<EF_Utility.Models.CheckBoxItem>() } ) .OrderBy( rb => rb.Name ); return View( model ); } } }

Read the article

Why does Process Explorer cause highly targeted failure of some applications / basic UI functions in a high-power EC2 Windows instance?

- by Dan Nissenbaum

Update: I have determined that Process Explorer itself - the program I am using to debug a performance issue - seems to be the cause of the issue. See note, with updated question, at end. I am running a high-power (cc2.8xlarge) Amazon AWS EC2 Windows instance off of a boot EBS volume, provisioned at 2500 PIOPS, which was created from a snapshot of a previous boot volume. My purpose with the instance is to use it as a development workstation with many developer tools installed, such as Visual Studio, a local XAMPP stack, etc. I have upwards of 40 programs installed on the machine. The usability of the instance as a development machine often works quite well. The RDP lag is adequately small. I have used it for hours on end without problems for some of my most intense development tasks. As a result, I have just purchased a reserved instance, and I opted to rebuild my development machine starting from scratch with a Windows Server 2012 AMI. After having installed all of my desired/required applications for development over this past week, again the machine seems to often work well and I have worked for up to an hour at a time without problems doing heavy development work. However, I continue to run into catastrophic OS usability issues that may prevent me from being able to rely on this machine as a development machine. I would like to track down the source of the problem, if there is an easily identifiable source. (Update: I have tracked down the source to be Process Explorer, the very program I was using to debug the problem. See update at end.) The issues are as follows. (These are some primary examples) Some applications, after a period of adequate responsiveness, suddenly begin to respond very, very slowly to basic user interface actions such as clicking on menus and pressing Ctrl-Tab to switch between open documents. Two examples are UltraEdit and PhpEd. It typically takes ~2 seconds for a menu to appear, and ~4 seconds to switch between open documents. Additionally, insertion point motion in the editor is lagged by upwards of ~2 seconds. Process Explorer, which I am using to help debug the problem, seems to run acceptably for a couple of minutes, but on multiple occasions Process Explorer itself hangs completely. It hangs at the same time as the problems noted above. When it hangs, it is 100% unresponsive. Clicking on its taskbar icon neither causes it to come to the top or go behind, and its viewable area is filled with nothing but a region partially containing pure white and partially containing incomplete windows widgets that are unreadable, and that never change. Waiting 10 minutes does not clear the problem. Attempting to force-quit Process Explorer by right-clicking on its taskbar icon and choosing "Close Window" takes about 5 full minutes to exit (Process Explorer itself can't be used to exit Process Explorer, and it is registered as a Task Manager substitute). Other programs work just fine during this time. For example, Chrome tabs flip very quickly back and forth, menus pop open instantly, web pages load quickly, and typing in forms/web applications inside the browser works promptly. Another example of an application that works crisply is Filemaker - its menus open instantly, and switching views in this application occurs promptly. Other applications also work without issue. Also, switching between applications occurs promptly as well. It is only a handful of applications that exhibit the problem, with some primary examples given above. At first I thought that EBS IOPS might be a problem. Therefore, I ran Performance Monitor, and watched the "Disk Transfers/sec" monitor in real time. At no point did this measure come anywhere close to hitting the 2500 PIOPS provisioned for the EBS volume. The RAM was also well under the limit (~10 GB used out of 60 GB). I did notice that one CPU core (out of 32 logical cores) was fully thrashing at 100% (i.e., ~3.1%) during the problematic periods. This seems to indicate that a single CPU core is handling the menus / flipping between open documents (for some applications only) / managing the Process Explorer user interface, and that this single core was hosed for some reason during the problematic periods. Also note that I have a desktop workstation (Windows 7) that I also use as a development machine, via a remote connection, with a nearly identical set of programs installed, and this desktop workstation does not exhibit any of the problems I've discussed above. I have been using it heavily for well over a year now. Any suggestions regarding either the source of the problem, or steps I might take to investigate the source of the problem, would be appreciated. Thanks. Note: After extensive testing & investigation, I have noticed that when I quit Process Explorer, the problem vanishes and the system performance returns to normal, and then reappears quickly when I run Process Explorer again (note: again, the performance problems only appear for a subset of applications - other applications work perfectly fine during the same period). My question is therefore (thankfully) more specific: Why does Process Explorer cause highly targeted failure of some applications (including itself) and basic UI functions, in a high-power EC2 Windows instance?

Read the article

Upgrading Team Foundation Server 2008 to 2010

- by Martin Hinshelwood

I am sure you will have seen my posts on upgrading our internal Team Foundation Server from TFS2008 to TFS2010 Beta 2, RC and RTM, but what about a fresh upgrade of TFS2008 to TFS2010 using the RTM version of TFS. One of our clients is taking the plunge with TFS2010, so I have the job of doing the upgrade. It is sometimes very useful to have a team member that starts work when most of the Sydney workers are heading home as I can do the upgrade without impacting them. The down side is that if you have any blockers then you can be pretty sure that everyone that can deal with your problem is asleep I am starting with an existing blank installation of TFS 2010, but Adam Cogan let slip that he was the one that did the install so I thought it prudent to make sure that it was OK. Verifying Team Foundation Server 2010 We need to check that TFS 2010 has been installed correctly. First, check the Admin console and have a root about for any errors. Figure: Even the SQL Setup looks good. I don’t know how Adam did it! Backing up the Team Foundation Server 2008 Databases As we are moving from one server to another (recommended method) we will be taking a backup of our TFS2008 databases and resorting them to the SQL Server for the new TFS2010 Server. Do not just detach and reattach. This will cause problems with the version of the database. If you are running a test migration you just need to create a backup of the TFS 2008 databases, but if you are doing the live migration then you should stop IIS on the TFS 2008 server before you backup the databases. This will stop any inadvertent check-ins or changes to TFS 2008. Figure: Stop IIS before you take a backup to prevent any TFS 2008 changes being written to the database. It is good to leave a little time between taking the TFS 2008 server offline and commencing the upgrade as there is always one developer who has not finished and starts screaming. This time it was John Liu that needed 10 more minutes to make his changes and check-in, so I always give it 30 minutes and see if anyone screams. John Liu [SSW] said: are you doing something to TFS :-O MrHinsh [SSW UK][VS ALM MVP] said: I have stopped TFS 2008 as per my emails John Liu [SSW] said: haven't finish check in @_@ can we have it for 10mins? :) MrHinsh [SSW UK][VS ALM MVP] said: TFS 2008 has been started John Liu [SSW] said: I love you! -IM conversation at TFS Upgrade +25 minutes After John confirmed that he had everything done I turned IIS off again and made a cup of tea. There were no more screams so the upgrade can continue. Figure: Backup all of the databases for TFS and include the Reporting Services, just in case. Figure: Check that all the backups have been taken Once you have your backups, you need to copy them to your new TFS2010 server and restore them. This is a good way to proceed as if we have any problems, or just plain run out of time, then you just turn the TFS 2008 server back on and all you have lost is one upgrade day, and not 10 developer days. As per the rules, you should record the number of files and the total number of areas and iterations before the upgrade so you have something to compare to: TFS2008 File count: Type Count 1 1845 2 15770 Areas & Iterations: 139 You can use this to verify that the upgrade was successful. it should however be noted that the numbers in TFS 2010 will be bigger. This is due to some of the sorting out that TFS does during the upgrade process. Restore Team Foundation Server 2008 Databases Restoring the databases is much more time consuming than just attaching them as you need to do them one at a time. But you may be taking a backup of an operational database and need to restore all your databases to a particular point in time instead of to the latest. I am doing latest unless I encounter any problems. Figure: Restore each of the databases to either a latest or specific point in time. Figure: Restore all of the required databases Now that all of your databases are restored you now need to upgrade them to Team Foundation Server 2010. Upgrade Team Foundation Server 2008 Databases This is probably the easiest part of the process. You need to call a fire and forget command that will go off to the database specified, find the TFS 2008 databases and upgrade them to 2010. During this process all of the 6 main TFS 2008 databases are merged into the TfsVersionControl database, upgraded and then the database is renamed to TFS_[CollectionName]. The rename is only the database and not the physical files, so it is worth going back and renaming the physical file as well. This keeps everything neat and tidy. If you plan to keep the old TFS 2008 server around, for example if you are doing a test migration first, then you will need to change the TFS GUID. This GUID is unique to each TFS instance and is preserved when you upgrade. This GUID is used by the clients and they can get a little confused if there are two servers with the same one. To kick of the upgrade you need to open a command prompt and change the path to “C:\Program Files\Microsoft Team Foundation Server 2010\Tools” and run the “import” command in “tfsconfig”. TfsConfig import /sqlinstance:<Previous TFS Data Tier> /collectionName:<Collection Name> /confirmed Imports a TFS 2005 or 2008 data tier as a new project collection. Important: This command should only be executed after adequate backups have been performed. After you import, you will need to configure portal and reporting settings via the administration console. EXAMPLES -------- TfsConfig import /sqlinstance:tfs2008sql /collectionName:imported /confirmed TfsConfig import /sqlinstance:tfs2008sql\Instance /collectionName:imported /confirmed OPTIONS: -------- sqlinstance The sql instance of the TFS 2005 or 2008 data tier. The TFS databases at that location will be modified directly and will no longer be usable as previous version databases. Ensure you have back-ups. collectionName The name of the new Team Project Collection. confirmed Confirm that you have backed-up databases before importing. This command will automatically look for the TfsIntegration database and verify that all the other required databases exist. In this case it took around 5 minutes to complete the upgrade as the total database size was under 700MB. This was unlike the upgrade of SSW’s production database with over 17GB of data which took a few hours. At the end of the process you should get no errors and no warnings. The Upgrade operation on the ApplicationTier feature has completed. There were 0 errors and 0 warnings. As this is a new server and not a pure upgrade there should not be a problem with the GUID. If you think at any point you will be doing this more than once, for example doing a test migration, or merging many TFS 2008 instances into a single one, then you should go back and rename the physical TfsVersionControl.mdf file to the same as the new collection. This will avoid confusion later down the line. To do this, detach the new collection from the server and rename the physical files. Then reattach and change the physical file locations to match the new name. You can follow http://www.mssqltips.com/tip.asp?tip=1122 for a more detailed explanation of how to do this. Figure: Stop the collection so TFS does not take a wobbly when we detach the database. When you try to start the new collection again you will get a conflict with project names and will require to remove the Test Upgrade collection. This is fine and it just needs detached. Figure: Detaching the test upgrade from the new Team Foundation Server 2010 so we can start the new Collection again. You will now be able to start the new upgraded collection and you are ready for testing. Do you remember the stats we took off the TFS 2008 server? TFS2008 File count: Type Count 1 1845 2 15770 Areas & Iterations: 139 Well, now we need to compare them to the TFS 2010 stats, remembering that there will probably be more files under source control. TFS2010 File count: Type Count 1 19288 Areas & Iterations: 139 Lovely, the number of iterations are the same, and the number of files is bigger. Just what we were looking for. Testing the upgraded Team Foundation Server 2010 Project Collection Can we connect to the new collection and project? Figure: We can connect to the new collection and project. Figure: make sure you can connect to The upgraded projects and that you can see all of the files. Figure: Team Web Access is there and working. Note that for Team Web Access you now use the same port and URL as for TFS 2010. So in this case as I am running on the local box you need to use http://localhost:8080/tfs which will redirect you to http://localhost:8080/tfs/web for the web access. If you need to connect with a Visual Studio 2008 client you will need to use the full path of the new collection, http://[servername]/tfs/[collectionname] and this will work with all of your collections. With Visual Studio 2005 you will only be able to connect to the Default collection and in both VS2008 and VS2005 you will need to install the forward compatibility updates. Visual Studio Team System 2005 Service Pack 1 Forward Compatibility Update for Team Foundation Server 2010 Visual Studio Team System 2008 Service Pack 1 Forward Compatibility Update for Team Foundation Server 2010 To make sure that you have everything up to date, make sure that you run SSW Diagnostics and get all green ticks. Upgrade Done! At this point you can send out a notice to everyone that the upgrade is complete and and give them the connection details. You need to remember that at this stage we have 2008 project upgraded to run under TFS 2010 but it is still running under that same process template that it was running before. You can only “enable” 2010 features in a process template you can’t upgrade. So what to do? Well, you need to create a new project and migrate things you want to keep across. Souse code is easy, you can move or Branch, but Work Items are more difficult as you can’t move them between projects. This instance is complicated more as the old project uses the Conchango/EMC Scrum for Team System template and I will need to write a script/application to get the work items across with their attachments in tact. That is my next task! Technorati Tags: TFS 2010,TFS 2008,VS ALM

Read the article

CodePlex Daily Summary for Sunday, March 14, 2010

CodePlex Daily Summary for Sunday, March 14, 2010New ProjectsBeerMath.net: BeerMath.net lets brewers calculate expected values for their recipes. Written entirely in C#, it can be used in any .Net language.Bible Study: Данный проект предусматривает создание программного обеспечения, предоставляющего пользователю гибкие и мощные инструменты для чтения и изучения Пи...E-Messenger: Description détaillé du sujet : Développement d'une application (client lourd) de messagerie instantané et de partage de fichier interne à ESPRIT....Facebook Azure Toolkit: The Facebook Azure Toolit provides a flexible and scalable hosting platform for the smallest and largest of Facebook applications. This toolkit hel...Gherkin editor: A simple text editor to write specifications using Gherkin. The editor supports code completion, syntax highlighting, spell checker and more.Mydra Center: Mydra Center is a Media center with the particularity to be very flexible, allowing developers to extend it and add new features. The philosophy be...MyTwits - A rich Twitter client for Windows powered by WPF: MyTwits is a free Twitter client for Windows XP/Vista/7 powered by WPF which gives you freedom to twit right from your desktop. You can do almost a...na laborke: aaaaaaaaaaaaaaasssssssssssssssddddddddddddddddddddfffffffffffffNMTools: The "Network Management Tools" (NMTools) complete OpenSLIM CMDB capabilities with Network Discovery, Automation and Configuration Managem...orionSRO: This project aims to make a fully functional server.Project Naduvar: Project Naduvar, is a centralized Locking Service in distribute systems. You can use this service in any of your existing distributed application. ...Silverlight Input Keyboard: Silverlight Input Keyboard and Behaviorsuh: uh.py is a command line tool that helps developers porting native projects from a case-insensitive filesystem to a case-sensitive filesystem by sea...New ReleasesAmiBroker Plug-ins with C#. A non official AmiBroker Plug-in SDK: AmiBroker Plug-in SDK v0.0.3: Small changesAmiBroker Plug-ins with C#. A non official AmiBroker Plug-in SDK: AmiBroker Plug-in SDK v0.0.4: Small updatesAStyle AddIn for SharpDevelop (Alex): 2.0 Production: #D 3.* add in with updated GUI elements.Coding Cockerel code samples: Validation with ASP .NET MVC and jQuery: Code sample related to the following blog post, http://codingcockerel.co.uk/consistent-validation-with-asp-net-mvc-and-jquery/.CoreSystem Library: Release - 1.0.3725.10575: This release contains a new class Crypto which makes encryption and descryption of string easy, it uses TripleDESCrystal Mapper: Release - 2.0.3725.11614: This is preview if release 2.0* that I promised, it contains following new features Tracking dirty entities and provide Save function to save all ...Digital Media Processing Project 1: Image Processor: Image Processor Alpha: First Release Features Include: Curve Adjustment Tool Region Growing Segmetation Threshold Segmentation Guassian/Butterworth High/Low pass filter...Exepack.NET: Exepack.NET version 0.03 beta: Exepack.NET is executable file compressor for .NET Framework. It allows to package your .NET application consisting of an executable file and sever...Export code as Code Snippet - Addin for Visual Studio 2008/2010 RC: VS 2010 Release Candidate: This release targets Visual Studio 2010 Release Candidate. It includes full Visual Basic 2010 source code. Fixes already available in previous ve...Facebook Azure Toolkit: 0.9 Beta: This is the initial beta releaseFamily Tree Analyzer: Version 1.0.5.0: Version 1.0.5.0 Change the way Census & Individual reports columns are sized so that user can resize later. Add filter to exclude individuals over...Home Access Plus+: v3.1.2.1: Version 3.1.2.1 Release Change Log: Added SSL SMTP Added SSL Authentication File Changes: ~/bin/CHS Extranet.dll ~/bin/CHS Extranet.pdb ~/we...Home Access Plus+: v3.1.3.1: Version 3.1.3.1 Release Change Log: Fixed Help Desk File Changes: ~/bin/CHS Extranet.dll ~/bin/CHS Extranet.pdb ~/helpdesk/*.htmIceChat: IceChat 2009 Alpha 11.6 Full Install: IceChat 2009 Alpha 11.6 - Full Installer, installs IceChat 2009, and the Emoticons, and will also download .Net Framework 2.0 if needed.IceChat: IceChat 2009 Alpha 11.6 Simple Binaries: This simply the IceChat2009.exe and the IPluginIceChat.dll needed to run IceChat 2009. Is not an installer, does not include emoticons.IceChat: IceChat 2009 Alpha 11.6 Source Code: IceChat 2009 Alpha 11.6 Source CodeLunar Phase Silverlight Gadget: Lunar Phase RC: Stable release. 6 languages Auto refresh. Name / Light problem fixedMiracle OS: Miracle OS Alpha 0.001: Our first release is the Alpha 0.001. Miracle OS doens't work at all, but we work on it. You to? Please help us.MyTwits - A rich Twitter client for Windows powered by WPF: MyTwits BETA 1: I'm happy to release first BETA version of MyTwits. Just download the zip file attached and run setup.exe and you are done! If you've any problem...MyTwits - A rich Twitter client for Windows powered by WPF: MyTwits Source BETA 1: I'm providing you just a project file, I'll upload complete source code once I fine tuned the code.NMock3: NMock3 - Beta 5, .NET 3.5: Hilights of this releaseTutorials have been updated and are in a much better place now. (they compile) Public API is getting locked down. Void me...Project Naduvar: com.declum.naduvar.locking: First ReleaseQueryToGrid Module for DotNetNuke®: QueryToGrid Module version 01.00.01: This module is a proof of concept for both using AJAX in a DotNetNuke® module, and for using SQL in a module. »»» IMPORTANT NOTE ««« Using this mo...SCSI Interface for Multimedia and Block Devices: Release 10 - Almost like a commercial burner!!: I made many changes in the ISOBurn program in this version, making it much more user-friendly than before. You can now add, rename, and delete file...Silverlight Input Keyboard: Initial Release: For more information see http://www.orktane.com/Blog/post/2009/11/09/Virtual-Input-Keyboard-Behaviours-for-Silverlight.aspxThe Silverlight Hyper Video Player [http://slhvp.com]: RC: The release candidate is now in place. Unfortunately, because there are aspects of it that I'm not yet ready to discuss, the code for the RC will...twNowplaying: twNowplaying 1.0.0.3: Press the Twitter icon to get started, don't forget to submit bugs to the issue tracker. What's new This release has some minor UI fixes.uh: 1.0: This is the first stable release. It isn't super full featured but it does the basics.UriTree: UriTree 2.0.0: This release is the WPF version of this application.VCC: Latest build, v2.1.30313.0: Automatic drop of latest buildVr30 OS: Blackra1n: The software was made by blackra1n for jailbreak iphone and ipod touch. Is not the Vr30 OS Team ProjectVr30 OS: Vr30 Operating System Live Cd 1.0: The Operating system linux made by team. For more information go to http://vr30os.tuxfamily.orgWatchersNET.TagCloud: WatchersNET.TagCloud 01.01.00: Whats New Decide between Tags generated from the Search words, or create your own Tag List Custom Tag list changes Small BugfixesZeta Resource Editor: Source code release 2010-03-13: New sources, some small fixes.ZipStorer - A Pure C# Class to Store Files in Zip: ZipStorer 2.35: Improved UTF-8 Support Correct writting of modification time for extracted filesMost Popular ProjectsMetaSharpWBFS ManagerRawrAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)ASP.NET Ajax LibraryASP.NETMicrosoft SQL Server Community & SamplesMost Active ProjectsRawrN2 CMSBlogEngine.NETpatterns & practices – Enterprise LibrarySharePoint Team-MailerFasterflect - A Fast and Simple Reflection APICaliburn: An Application Framework for WPF and SilverlightjQuery Library for SharePoint Web ServicesCalcium: A modular application toolset leveraging PrismFarseer Physics Engine

Read the article

CodePlex Daily Summary for Thursday, February 25, 2010

CodePlex Daily Summary for Thursday, February 25, 2010New ProjectsAptusSoftware.Threading: AptusSoftware.Threading is a class library designed primarily to assist in the development of multi-threaded WinForm applications, although there i...AxiomGameDesigner: It is going to be a universal scene editor for Axiom 3D game engine. It is in pure C# and will be kept portable to MONO for compatibility with linu...Badger - Unity Productivity Extensions: A set of Microsoft Unity Extensions. Why Badger? Because I love badgers.Business & System Analysis Templates and Best Practices for Russian: http://saway.codeplex.com/Conectayas: Conectayas is an open source "Connect Four" alike game but transformable to "Tic-Tac-Toe" and to a lot of similar games that uses mouse. Written in...FastCode: .NET 3.5 Extensions set to increase coding speed.Hundiyas: Hundiyas is an open source "Battleship" alike game totally written in DHTML (JavaScript, CSS and HTML) that uses mouse. This cross-platform and cro...Icelandic Online Banking: Icelandic Online Banking is project defining a web service interface for online banking.IE8 AddOns XML Creator: Application that helps on creating the xml files for IE8 Accelerators, Search Providers and the markup for Web Slices.iKnowledge: a asp.net mvc demoLearn ASP.NET MVC: Learn ASP.NET MVC is a project for the members of the Peer Learning group in Silicon Valley. It contains the SportsStore solution from the Pro ASP...Live at Education Meta Web-Service: Live at Education Meta Web-Service is intended to abstract from several technologies that are included in Live@edu set of services. This web-ser...Low level wave sound output for VB.NET: Low level sound output class for VB.NET using platform invocation services to call winmm.dllMailQ: MailQ makes it easier for developers to send mail messages from an application. The system sends mails based on a database queue system (store, se...Managed DXGI: Managed DXGI library is Fully managed wrapper writen on C# for DXGI 1.0 and 1.1 technology. It makes easier to support DXGI in managed application....Multivalue AutoComplete WinForms TextBox in C#: This project is a sample application that demonstrates how to create a multivalue WinForms textbox in C# using .NET Framework 3.5.Nifty CSharp Tools: Nifty CSharp Tools, will contain various tools and snippets. IRCBot, splashscreens, linq, world of warcraft log parsing, screenshot uploaders, twi...PHP MPQ: A port of StormLib to PHP for handling Blizzard MPQ files.RedDevils strategy - Project Hoshimi Programming Battle: Source Code of RedDevils strategy. Imagine Cup 2008 - Project Hoshimi Programming Battle.RNUNIT: rNunit is a distributed Nunit project. Many application these days are client-server application, distributed application and regular unit testing ...Samar Solution: Samar Solutions is a business system for office automation.Silverlight OOMRPG Game Engine: Silverlight OOMRPG Game EngineSimulator: GPSSimulatorSLARToolkit - Silverlight Augmented Reality Toolkit: SLARToolkit is a flexible Augmented Reality library for Silverlight with the aim to make real time Augmented Reality applications with Silverlight ...Spiral Architecture Driven Development (SADD) for Russian: Это русская версия сайта sadd.codeplex.comSQLSnapshotManager: Easily manage SQL Server database snapshots in a easy to use visual interface.Twilio with VB.NET MVC: Twilio with VB.NET MVC is a sample application for developing with Twilio's REST based telephony API. It includes an XML Schema of the TwiML respon...Ultra Speed Dial: UltraSpeedDial.com - Online Speed Dial Page.Visual HTML Editor justHTML: justHTML - is simle windows-application WYSIWYG editor that allow everyone - without any knowledge of HTML - to create and edit web-pages. It supp...WinMTR.NET: .NET Clone of the popular Windows clone of the popular Linux Matt's TracerouteWPF Dialogs: "WPF Dialogs" is a library for different Dialogs in WPF (e.g. FolderBrowseDialog, SaveFileDialog, OpenFileDialog etc.). These Dialogs are written i...WPFLogin: A small Login window in WPF and C#XNA PerformanceTimers: CPU Timers for Windows and Xbox360. Can track multiple threads, and presents output as a log on-screen.New ReleasesAptusSoftware.Threading: 2.0.0: First public release. This release is in production as part of several commercial applications and is stable. The source code download includes a...BizTalk Software Factory: BizTalk Software Factory v2.1: This is a service release for the BizTalk Software Factory for BizTalk Server 2009, containing so far: Fix for x64: the SN.EXE tool is now locate...Business & System Analysis Templates and Best Practices for Russian: R00 The Place reserver: Just to reserve the place Will be filled out soonChronos WPF: Chronos v1.0 Beta 2: Added a new SplashScreen Added a new Login View and implemented Log Off Added a new PasswordBoxHelper (http://www.codeproject.com/Articles/371...dotNetTips: dotNetTips.Utility 3.5 R2: This is a new release (version 3.5.0.3) compatible with .NET 3.5. Lots of new classes/features!! Requires SP1 if using the Entity Framework extensi...fleXdoc: template-based server-side document generator (docx): fleXdoc 1.0 beta 3: The third and final beta of fleXdoc. fleXdoc consists of a webservice and a (test)client for the service. Make sure you also download the testclien...FluentPS: FluentPS v1.0: - FluentPS is moved from ASMX to WCF interface of the Project Server Interface (PSI) - Impersonation changes to work in compliance with WCF interfa...FolderSize: FolderSize.Win32.1.0.4.0: FolderSize.Win32.1.0.3.0 A simple utility intended to be used to scan harddrives for the folders that take most place and display this to the user...iTuner - The iTunes Companion: iTuner 1.1.3707 Beta 3: As promised, the iTuner Automated Librarian is now available. This automatically cleans an entire album of dead tracks and duplicates as tracks ar...Live at Education Meta Web-Service: LAEMWS v 1.0 beta: Release Candidate for LAEMWS.Macaw Reusable Code Library: LanguageConfigurationSolution: This Solution helps developing a multi language publishing web siteManaged DXGI: Initial Release.: Base declaration of interfaces, most of them untested yet.Math.NET Numerics: 2010.2.24.667 Build: Latest alpha buildMiniTwitter: 1.08.1: MiniTwitter 1.08.1 更新内容変更インクリメンタル検索時には大文字小文字の区別をしないように変更クライアント名の表示を本家にあわせて from から via に変更修正公式 RT 時にステータスが上に表示されたり二重に表示されるバグを修正自分が自分へ返信...Multivalue AutoComplete WinForms TextBox in C#: 1.0 First public release: Multivalue autocomplete textbox control and host application in this release are released in a single Visual Studio 2008 projects. See my related b...NMock3: NMock3 - Beta3, .NET 3.5: This release has some exciting new features. Please start providing feedback on the tutorials. The first several are complete and the rest are no...nxAjax - an asp.net ajax library using jQuery: nxAjax v3 codeplex 7: nxAjax v3 codeplex 7 binary and test website. Bug Fixed: ajax:Form control Add: Drag and drop Rewritten: DragnDropManager DragPanel DropPan...Office Apps: 0.8.7: whats new? Document.Editor and Document.Viewer now supports FlowDocument (.xaml) files bug fix'sPDF Rider: PDF Rider 0.3: Application PrerequisitesMicrosoft Windows Operating Systems (XP (tested) - Vista - 7) Microsoft .NET Framework 3.5 runtime A PDF rendering sof...ShellLight: ShellLight 0.1.0.1 Src: Codeplex project released. This is only a preview of the product. Until the first final release there will be many improvements.Silverlight OOMRPG Game Engine: SilverlightGameTutorialSolution v1.01: Please visit my blog for Silverlight OOMROG Game Tutorial: http://www.cnblogs.com/Jax/archive/2010/02/24/1673053.html.Simple Savant: Simple Savant v0.4: Added support for full-text indexing (See Full-Text Indexing) Added support for attribute spanning and compression for property values larger tha...Spiral Architecture Driven Development (SADD) for Russian: R00: R00 to reserve site nameTeamReview - TFS Code Review: Release 1.1.3: Release Features New expanded product positioning for capturing any targeted coding work as a trackable, assignable, reportable Work Item for any r...Text Designer Outline Text Library: 10th minor release: Version 0.3.1 (10th minor release)Fixed the gradient brush being too big for the text, resulting in not much gradient shown in the text. Gradient...TFS Workflow Control: TeamExplorer and TSWA control 1.0 for TFS 2010 RC: This is a special version for TFS 2010 RC. Use the RC version of the power tools to modify the layout of your work items (http://visualstudiogaller...thinktecture WSCF.blue: WSCF.blue V1 Update (1.0.7) - VS2010 RC Support: This update adds support for Visual Studio 2010 RC in addition to Visual Studio 2008. Please note that Visual Studio 2010 Beta 2 is NOT supported a...Tumblen3: tumblen3 Version 25Feb2010: ready for Twitter's xAuthUMD文本编辑器: UMDEditor文本编辑器V2.1.0: 2.1.0 (2010-02-24) 增加查找章节内指定文本内容的功能 2.0.4 (2010-02-06) 章节内容框增加右键菜单，包含编辑文本的基本操作 ------------------------------------------------------- 执行 reg.bat ...VCC: Latest build, v2.1.30224.0: Automatic drop of latest buildVisual HTML Editor justHTML: Latest binary: Latest buid here. Executable and mshtml.dll included in this archive. Ready to use ;)Visual HTML Editor justHTML: Source code for version 2.5: Visual studio 2008 project with full source code.VOB2MKV: vob2mkv-1.0.2: The release vob2mkv-1.0.2 is a feature update of the VOB2MKV project. It now includes a DirectShow source filter, MKVSOURCE. A source filter allo...WinMTR.NET: V 1.0: V 1.0WPF Dialogs: Version 0.1.0: Version 0.1.0 FolderBrowseDialog is implementet for more information look here Version 0.1.0 (german: Version 0.1.0 - Deutsch).WPF Dialogs: Version 0.1.1: Version 0.1.1 Features FolderBrowseDialog was extended / FolderBrowseDialog - Deutsch wurde erweitertXNA PerformanceTimers: XNA PerformanceTimers 0.1: Initial release.Zeta Resource Editor: Release 2010-02-24: Added HTTP proxy server support.Most Popular ProjectsASP.NET Ajax LibraryManaged Extensibility FrameworkWindows 7 USB/DVD Download ToolDotNetZip LibraryMDownloaderVirtual Router - Wifi Hot Spot for Windows 7 / 2008 R2MFCMAPIDroid ExplorerUseful Sharepoint Designer Custom Workflow ActivitiesOxiteMost Active ProjectsDinnerNow.netBlogEngine.NETRawrInfoServiceSLARToolkit - Silverlight Augmented Reality ToolkitNB_Store - Free DotNetNuke Ecommerce Catalog ModuleSharpMap - Geospatial Application Framework for the CLRjQuery Library for SharePoint Web ServicesRapid Entity Framework. (ORM). CTP 2Common Context Adapters

Read the article

Mauritius Software Craftsmanship Community

There we go! I finally managed to push myself forward and pick up an old, actually too old, idea since I ever arrived here in Mauritius more than six years ago. I'm talking about a community for all kind of ICT connected people. In the past (back in Germany), I used to be involved in various community activities. For example, I was part of the Microsoft Community Leader/Influencer Program (CLIP) in Germany due to an FAQ on Visual FoxPro, actually Active FoxPro Pages (AFP) to be more precise. Then in 2003/2004 I addressed the responsible person of the dFPUG user group in Speyer in order to assist him in organising monthly user group meetings. Well, he handed over management completely, and attended our meetings regularly. Why did it take you so long? Well, I don't want to bother you with the details but short version is that I was too busy on either job (building up new companies) or private life (got married and we have two lovely children, eh 'monsters') or even both. But now is the time where I was starting to look for new fields given the fact that I gained some spare time. My businesses are up and running, the kids are in school, and I am finally in a position where I can commit myself again to community activities. And I love to do that! Why a new user group? Good question... And 'easy' to answer. Since back in 2007 I did my usual research, eh Google searches, to see whether there existing user groups in Mauritius and in which field of interest. And yes, there are! If I recall this correctly, then there are communities for PHP, Drupal, Python (just recently), Oracle, and Linux (which used to be even two). But... either they do not exist anymore, they are dormant, or there is only a low heart-beat, frankly speaking. And yes, I went to meetings of the Linux User Group Meta (Mauritius) back in 2010/2011 and just recently. I really like the setup and the way the LUGM is organised. It's just that I have a slightly different point of view on how a user group or community should organise itself and how to approach future members. Don't get me wrong, I'm not criticizing others doing a very good job, I'm only saying that I'd like to do it differently. The last meeting of the LUGM was awesome; read my feedback about it. Ok, so what's up with 'Mauritius Software Craftsmanship Community' or short: MSCC? As I've already written in my article on 'Communities - The importance of exchange and discussion' I think it is essential in a world of IT to stay 'connected' with a good number of other people in the same field. There is so much dynamic and every day's news that it is almost impossible to keep on track with all of them. The MSCC is going to provide a common platform to exchange experience and share knowledge between each other. You might be a newbie and want to know what to expect working as a software developer, or as a database administrator, or maybe as an IT systems administrator, or you're an experienced geek that loves to share your ideas or solutions that you implemented to solve a specific problem, or you're the business (or HR) guy that is looking for 'fresh' blood to enforce your existing team. Or... you're just interested and you'd like to communicate with like-minded people. Meetup of 26.06.2013 @ L'arabica: Of course there are laptops around. Free WiFi, power outlet, coffee, code and Linux in one go. The MSCC is technology-agnostic and spans an umbrella over any kind of technology. Simply because you can't ignore other technologies anymore in a connected IT world as we have. A front-end developer for iOS applications should have the chance to connect with a Python back-end coder and eventually with a DBA for MySQL or PostgreSQL and exchange their experience. Furthermore, I'm a huge fan of cross-platform development, and it is very pleasant to have pure Web developers - with all that HTML5, CSS3, JavaScript and JS libraries stuff - and passionate C# or Java coders at the same table. This diversity of knowledge can assist and boost your personal situation. And last but not least, there are projects and open positions 'flying' around... People might like to hear others opinion about an employer or get new impulses on how to tackle down an issue at their workspace, etc. This is about community. And that's how I see the MSCC in general - free of any limitations be it by programming language or technology. Having the chance to exchange experience and to discuss certain aspects of technology saves you time and money, and it's a pleasure to enjoy. Compared to dusty books and remote online resources. It's human! Organising meetups (meetings, get-together, gatherings - you name it!) As of writing this article, the MSCC is currently meeting every Wednesday for the weekly 'Code & Coffee' session at various locations (suggestions are welcome!) in Mauritius. This might change in the future eventually but especially at the beginning I think it is very important to create awareness in the Mauritian IT world. Yes, we are here! Come and join us! ;-) The MSCC's main online presence is located at Meetup.com because it allows me to handle the organisation of events and meeting appointments very easily, and any member can have a look who else is involved so that an exchange of contacts is given at any time. In combination with the other entities (G+ Communities, FB Pages or in Groups) I advertise and manage all future activities here: Mauritius Software Craftsmanship Community This is a community for those who care and are proud of what they do. For those developers, regardless how experienced they are, who want to improve and master their craft. This is a community for those who believe that being average is just not good enough. I know, there are not many 'craftsmen' yet but it's a start... Let's see how it looks like by the end of the year. There are free smartphone apps for Android and iOS from Meetup.com that allow you to keep track of meetings and to stay informed on latest updates. And last but not least, there is a Trello workspace to collect and share ideas and provide downloads of slides, etc. Trello is also available as free smartphone app. Sharing is caring! As mentioned, the #MSCC is present in various social media networks in order to cover as many people as possible here in Mauritius. Following is an overview of the current networks: Twitter - Latest updates and quickies Google+ - Community channel Facebook - Community Page LinkedIn - Community Group Trello - Collaboration workspace to share and develop ideas Hopefully, this covers the majority of computer-related people in Mauritius. Please spread the word about the #MSCC between your colleagues, your friends and other interested 'geeks'. Your future looks bright Running and participating in a user group or any kind of community usually provides quite a number of advantages for anyone. On the one side it is very joyful for me to organise appointments and get in touch with people that might be interested to present a little demo of their projects or their recent problems they had to tackle down, and on the other side there are lots of companies that have various support programs or sponsorships especially tailored for user groups. At the moment, I already have a couple of gimmicks that I would like to hand out in small contests or raffles during one of the upcoming meetings, and as said, companies provide all kind of goodies, books free of charge, or sometimes even licenses for communities. Meeting other software developers or IT guys also opens up your point of view on the local market and there might be interesting projects or job offers available, too. A community like the Mauritius Software Craftsmanship Community is great for freelancers, self-employed, students and of course employees. Meetings will be organised on a regular basis, and I'm open to all kind of suggestions from you. Please leave a comment here in blog or join the conversations in the above mentioned social networks. Let's get this community up and running, my fellow Mauritians! Recent updates The MSCC is now officially participating in the O'Reilly UK User Group programm and we are allowed to request review or recension copies of recent titles. Additionally, we have a discount code for any books or ebooks that you might like to order on shop.oreilly.com. More applications for user group sponsorship programms are pending and I'm looking forward to a couple of announcement very soon. And... we need some kind of 'corporate identity' - Over at the MSCC website there is a call for action (or better said a contest with prizes) to create a unique design for the MSCC. This would include a decent colour palette, a logo, graphical banners for Meetup, Google+, Facebook, LinkedIn, etc. and of course badges for our craftsmen to add to their personal blogs and websites. Please spread the word and contribute. Thanks!

Search Results

Search found 11221 results on 449 pages for 'pure virtual'.

Page 393/449 | < Previous Page | 389 390 391 392 393 394 395 396 397 398 399 400 | Next Page >

- by rhololkeolke

- by user1710563

- by Mike

- by sprugman

- by ThomasGHenry

- by Alex Demchak

- by legiwei

- by AKa

- by obeliksz

- by user22

- by Phil Cross

- by Pierre

- by RobertHC

- by Arno2501

- by Parhs

- by Firestrand

- by Sebastian Büttner

- by John N

- by Andrew

- by Taersious

- by Dan Nissenbaum

- by Martin Hinshelwood

< Previous Page | 389 390 391 392 393 394 395 396 397 398 399 400 | Next Page >