Search Results

Search found 60942 results on 2438 pages for 'help me'.

Page 395/2438 | < Previous Page | 391 392 393 394 395 396 397 398 399 400 401 402  | Next Page >

• Blue screen issue

  - by Jack

  I received several BSOD's that are recorded in the following logs: Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.256.48 Locale ID: 3081 Additional information about the problem: BCCode: 50 BCP1: FFFFF95FF8150C10 BCP2: 0000000000000008 BCP3: FFFFF95FF8150C10 BCP4: 0000000000000005 OS Version: 6_1_7601 Service Pack: 1_0 Product: 256_1 Files that help describe the problem: C:\Windows\Minidump\040412-20030-01.dmp C:\Users\Jack\AppData\Local\Temp\WER-33025-0.sysdata.xml ~~~~~ Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.256.48 Locale ID: 3081 Additional information about the problem: BCCode: 1e BCP1: 0000000000000000 BCP2: 0000000000000000 BCP3: 0000000000000000 BCP4: 0000000000000000 OS Version: 6_1_7601 Service Pack: 1_0 Product: 256_1 Files that help describe the problem: C:\Windows\Minidump\040412-32729-01.dmp C:\Users\Jack\AppData\Local\Temp\WER-64319-0.sysdata.xml It seems to occur at random. I have gone 2 months without a BSOD, then I have gone a week with 10+ without changing what I am doing. This is my system: Windows 7 Professional 64-bit Gigabyte GA-890GPA-UD3H AMD Phenom II x6 1090T Processor 3.2GHz 8GB Ram(4X 2GB) Radeon HD 7850 2TB HDD Thermaltake 500W PSU I'm not sure about what the BSOD says, it just counts to 100 by 5's then restarts the computer. It happens fast and I have tried to get a picture before but to no avail.

  Read the article

• Improving abysmal 802.11n wireless network

  - by concept

  I am in desperate need of help to improve the abysmal performance of my 802.11n wireless network. At best I get 30Mbs (this is an internet download) from a technology that boasts 300Mbs, even worse is the LAN where to date best i have ever gotten is 1Mbs. It is literally quicker to copy the file to a USB and walk it to the other computer. Infrastructure is this AP 802.11n only broadcasting at both 2.4GHz and 5GHz Mac with 802.11a/b/g/n card is connected to the AP via 5GHz Linux with 802.11a/b/g/n card is connected to AP via 2.4GHz I have conducted the following tests (results at end of post) Internet based speed test wired and wireless LAN file copy wired and wireless I have read: http://nutsaboutnets.com/troubleshooting-wi-fi-problems/ http://www.smallnetbuilder.com/wireless/wireless-basics/30664-5-ways-to-fix-slow-80211n-- speed http colon //www.wi-fiplanet dot com/tutorials/7-tips-to-increase-wi-fi-performance.html Slow file transfer on network between two 802.11n laptops (connected directly together via access point) Wireless Network Performance Issues Slower than expected 802.11n wireless network speeds I have made the following optimizations AP broadcasts only 802.11n on both 2.4GHz and 5GHz frequencies 2.4GHz is on a channel with least interference (live in an apartment with lots of APs), this did make a 10Mb/sec improvement Our AP is the only one transmitting on the 5GHz freq. Security: WPA Personal WPA2 AES encryption Bandwidth: 20MHz / 40MHz (i assume this to be channel bonding) I have tried the following with 0 improvement Dropped the Fragment Threshold to 512 Dropped the Request To Send (RTS) Threshold to 512 and 1 Even thought of buying a frequency spectrum analyzer, until i saw the cost of them!!! Speed test results Linux Wired: DOWNLOAD 128.40Mb/s UPLOAD 10.62Mb/s www dot speedtest dot net/my-result/2948381853 Mac Wired: DOWNLOAD 118.02Mb/s UPLOAD 10.56Mb/s www dot speedtest dot net/my-result/2948384406 Linux Wireless: DOWNLOAD 23.99Mb/s UPLOAD 10.31Mb/s www.speedtest dot net/my-result/2948394990 Mac Wireless: DOWNLOAD 22.55Mb/s UPLOAD 10.36Mb/s www.speedtest dot net/my-result/2948396489 LAN NFS 53,345,087 bytes (51Mb) file Linux Mac NFS Wired: 65.6959 Mb/sec Linux Mac NFS Wireless: .9443 Mb/sec All help is appreciated, even testing methods will be accepted.

  Read the article

• SpamAssassin bayesian score discrepancies

  - by CaptSaltyJack

  This makes my brain hurt. For some reason, SpamAssassin is giving high scores to certain emails, but when I test them on the command line, they get a low score. This one particular email has this in the header: X-Spam-Flag: YES X-Spam-Score: 8.521 X-Spam-Level: ******** X-Spam-Status: Yes, score=8.521 tagged_above=-9999 required=5 tests=[BAYES_99=3.5, BAYES_999=0.2, HTML_MESSAGE=0.001, NO_RECEIVED=-0.001, NO_RELAYS=-0.001, RAZOR2_CF_RANGE_51_100=0.5, RAZOR2_CF_RANGE_E8_51_100=1.886, RAZOR2_CHECK=0.922, URIBL_RHS_DOB=1.514] autolearn=no Yet when I dump the raw email into a file msg and run sudo su amavis -c 'spamassassin -t msg', I get this output: Content analysis details: (3.8 points, 5.0 required) pts rule name description ---- ---------------------- -------------------------------------------------- 1.5 URIBL_RHS_DOB Contains an URI of a new domain (Day Old Bread) [URIs: cliobeads.com] -1.0 ALL_TRUSTED Passed through trusted hosts only via SMTP 0.0 HTML_MESSAGE BODY: HTML included in message -0.0 BAYES_20 BODY: Bayes spam probability is 5 to 20% [score: 0.1855] 1.9 RAZOR2_CF_RANGE_E8_51_100 Razor2 gives engine 8 confidence level above 50% [cf: 100] 0.5 RAZOR2_CF_RANGE_51_100 Razor2 gives confidence level above 50% [cf: 100] 0.9 RAZOR2_CHECK Listed in Razor2 (http://razor.sf.net/) I'm really confused as to why when the email comes in, it gets a completely different score attached to it than when I run spamassassin -t. Is there some other way I should be testing emails? Also, my users have the ability to drag false positives into a folder called "False Positives," and every day a cron job fires off that runs this on every message in every user's folder: sa-learn --dbpath=/var/lib/amavis/.spamassassin --ham /tmp/*-*.eml >/dev/null I ran sudo locate bayes_toks and there's definitely only one bayes DB on the system, in /var/lib/amavis/.spamassassin. I'm clueless, any help would be great and may help restore my sanity!

  Read the article

• MSSQL Server Management Studio Express 2005 license limit error should not be displayed

  - by Erik Vold

  I just tried restoring a 250MB database from a backup on my local machine, and got the following message: TITLE: Microsoft SQL Server Management Studio Express ------------------------------ Restore failed for Server 'MULTIVIS-A0D9F3\SQLEXPRESS'. (Microsoft.SqlServer.Express.Smo) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.3042.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Restore+Server&LinkId=20476 ------------------------------ ADDITIONAL INFORMATION: System.Data.SqlClient.SqlError: CREATE DATABASE or ALTER DATABASE failed because the resulting cumulative database size would exceed your licensed limit of 4096 MB per database. (Microsoft.SqlServer.Express.Smo) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.3042.00&LinkId=20476 ------------------------------ BUTTONS: OK ------------------------------ I had 3 db's on the machine, one ~4.1gb db and two other dbs < 10mb each. So I did some googling on this error and saw the suggestion to try shrinking my other dbs to free up some space. So I did so on the 4.1gb db and now when I go to 'properties' for that db it says it is taking/using ~2.4gb. So I should have space now I figure, but whenever I try to restore the ~250mb database now I still get the error message above.. I tried restarting as well but that wasn't helpful. Any idea what the issue is?

  Read the article

• Postfix selective header_checks: smtpd_relay_restrictions vs. smtpd_recipient_restrictions

  - by luke

  Some of my customers implemented commercial software that violate email-RFCs such that we have had to relax our header checks. In consequence, we receive more spam. Prolog: I know the domains (customer.com) and IP-addresses (a.b.c.d/C) these emails come from Kind request for help: Is it possible to setup one Postfix (2.11) instance on Linux such that: It applies only some header checks for emails from .*@customer.com But applies all header checks for all other email sources? I thought of a combination of mynetworks that includes the subnet a.b.c.d/C in smtpd_recipient_restrictions -- allowing all these messages through -- and simultaneously avoid an open-relay with smtpd_relay_restrictions. However, this has not worked out as expected. Any idea or help is highly appreciated. Thanks in advance. Luke ==EDIT== For the current issue, I solved the problem by prepending REDIRECTs to header_checks as follows: /^received: from.*customer.com.*by mail.own.com.*for.*luke@own.*/ REDIRECT [email protected] This works so far as neeeded. Irrespective thereof, I am still looking for a postfix configuration that would turn this text-based setting into an IP-Address-Range based forwarding rule.... Thanks. Luke

  Read the article

• ssh connection slow when using @hostname.com but now when using @ipaddress

  - by Alex Recarey

  When connecting to a Debian server using ssh, if I use [email protected] (the IP address of hte server) the connection is instant. If however I use [email protected] (a DNS redirected to the IP address of the server) the ssh connection hangs for a 20 seconds before connecting successfully. The ssh logs show the following: [alex@alex home]$ ssh -v -v [email protected] OpenSSH_5.5p1, OpenSSL 1.0.0c-fips 2 Dec 2010 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 and here it hangs during 20 seconds before continuing. I think it might have something to do with reverse DNS or similar (the server does not really "know" it's name is hostname.com, it just has that DNS rediriected to its IP address). I have added the following options to /etc/ssh/sshd_config: UseDNS no GSSAPIAuthentication no to no effect. The server's DNS records in /etc/resolv.conf are configured correctly: ping hostname.com PING sub.domain.com (X.X.X.X) 56(84) bytes of data. 64 bytes from replicant (X.X.X.X): icmp_seq=1 ttl=64 time=0.029 ms 64 bytes from replicant (X.X.X.X): icmp_seq=2 ttl=64 time=0.050 ms?s Thanks for the help. Solution: It seems the DSL router my ISP saddled me with was causing the trouble. Changing my DNS server from 192.168.1.1 (router's IP) to google's (8.8.8.8, always good to know when you are in a hurry) instantly solved the connection delay problem. I am guessing that the 50€ router provided does not cache DNS entries, although I don't understand why pinging the DNS address had no delay, and 20 seconds is too long of a wait, even for uncached DNS. Tnanks again for the help!

  Read the article

• Apache, suexec, PHP, suPHP

  - by Chris_K

  While I'm quite comfortable as a Linux user, my Linux Admin-fu is a bit weak. Thus, I'm here looking for guidance with a CentOS server I'm about to build. I need to setup an Apache2 web server for a few of our clients. I want each client's web content to be under their home directory (USERDIR in apache.conf, right?) for the static HTML sites. I want Apache to run as the client (suexec?). Some of their stuff will be PHP apps and I'm under the impression I'll want to look at suphp as well then. So basically I want to look like a small version of a shared web hosting company. Considering how common those are I thought I'd easily find a nice current How-To guide on setting this all up but so far I've had very little luck. I suspect my search words are off. So the questions (feel free to answer any or all): Anyone have some solid links to current/modern guides that would help me set this all up? No, the apache documentation site is not a guide ;-) Since I have a mix of static sites and PHP apps do I want/need both suexec and suphp installed? If so, does that introduce any challenges I should be aware of? Should I be looking at other options instead of suexec and suphp? I plan to give the end users SSH, SFTP or SCP access to their stuff (if that affects anything). Thanks in advance for your help.

  Read the article

• WTH? Upgrading Ubuntu 9.10 to 10.04 Problem: No Internet Connection?

  - by damx

  Earlier today I tried upgrading my Ubuntu 9.10 Karmic Kaola from the update manager. (FYI: all 9.10 updates were applied prior to this) Everything was going well downloading until I got an error dialog informing me that some software packages weren't downloaded because of an Internet connection. Would say it was halfway thru. Anyway, Was told that the software packages that it did download, however, would kept and I figure it's not a big deal. Just run it again. But first ran Firefox to verify my connection as I haven't had any connection problems. But my internet connection was/is fine as evident by this posting. With that cleared, I ran the update manager again, clicked on "Upgrade" and this time I received "Could not download the release notes. Please check your internet connection" huh? This is my first time dealing w/ Ubuntu and my first upgrade so I am hoping someone can help. Not sure what the problem can be. I am can surf the web w/ no problems. Please help. PS: There was no installing at any point. Just downloading. PSS: The software it managed to download the first time around is now visible in the update manager but don't think I should install as I see in the compiz description it's for v1:0.8-4-0ubuntu2 I figure it's designed for 10.04 and might ruin things further if I install

  Read the article

• Why can't I install Java?

  - by Patrick

  I've been searching high and low for someone who can help me. I've been trying for a month. A month. to install Java on my new PC to no avail. No tech support forum can seem to help me. It all started while playing tekkit one day. I kept running out of memory (using the 32-bit JRE 7 u45) so I decided to install the 64-bit version. I uninstalled the 32-bit version first, for some reason, and downloaded the 64 bit runtime. In the installer, I go through all the normal screens until the installation progress bar appears. Then, it just sits there. No progress is made. No CPU is used by the installer, or any of its dependencies. The installer will stay like this for hours, days, and in one case a whole week without doing anything at all. I've tried installing older versions, the 32-bit version, even Java 6 and none of them will install. UAC is disabled, I've run regedit, CCleaner, and any other "fix-it" program there is. It's getting to the point where I may just have to wipe my hard drives and start over. I have several applications that require java, so this is an absolute necessity. Please, please, someone have the answer. Here are my system specs: -Intel i7-3770k -AsRock z77 Extreme3 -Samsung 840 pro SSD -WD Caviar Black 1tb

  Read the article

• HP Officejet 4500 G510n-z Not Showing up in Remote Desktop (Terminal Services)

  - by Greg_the_Ant

  I installed this printer on a windows XP machine. First using the wireless option, and later using USB. In both cases when I connect to my other computer (also Windows XP) via terminal services and check printers in the local resources tab it does not show up on the remote session. I used to have a Samsung connected to my local computer over USB and and that worked fine over terminal services. Things I tried so far: I did read this page and installed the software fix on both computers: (Printers that use ports that do not begin with...) I installed the minimum HP software install on the remote computer and that didn't help either. I also tried running the add new printer wizard on the remote computer: I selected "local printer attached to this computer" and did not check the "automatically.." option. On the next page of the wizard I can select an option for "use the following port". I see options for TS001 through TS009 there. I'm assuming those are coming from the local machine. I tried clicking each one and then checking "have disk" and pointing it to C:\3be8dc611b11322e8ddf8a67\i386\msxpsdrv.inf 1 but for every single TS00.. port it says "The specified location does not contain information about your hardware." Any help would be greatly appreciated. I'm pretty stuck at this point. 1 C:\3be8dc611b11322e8ddf8a67 is the folder I extracted the HP driver software to after I downloaded it.

  Read the article

• Ubuntu xrandr rotate issue

  - by user83544

  I've just bought a second monitor for my PC which happens to be a pivot monitor. I've already read lots of forums related to my problem but haven't come across a solution - I have the same symptoms as dozens of posts but no matter whatever I try it just doesn't work. I've already changed the xorg.conf file and added in the device section just under Driver "nvidia" the following for my second monitor: Option "RandRRotation" "on" When I save and reboot I try to rotate my screen with the nvidia X server settings by choosing the second monitor and clicking either "left" or "right" for the rotation. It immediately exits the nvidia settings window and does nothing. I tried within the terminal by typing: xrandr -o right I get the following error: X Error of failed request: BadMatch (invalid parameter attributes) Major opcode of failed request: 154 (RANDR) Minor opcode of failed request: 2 (RRSetScreenConfig) Serial number of failed request: 14 Current serial number in output stream: 14 I actually manage to rotate it with Option "Rotate" "CCW" instead of "RandRRotation". The problem with this solution is that you get the second monitor in the right position, but any window you open on that screen is practically unchangeable. You can't change the size nor move it, making it useless for reading PDFs, which is the main reason why I bought this second screen to help me write my thesis. Any help is really appreciated. sudo lshw -c video hiram@hiram-linux:~$ sudo lshw -c video *-display description: VGA compatible controller product: nVidia Corporation vendor: nVidia Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:16 memory:f8000000-f9ffffff memory:d8000000-dfffffff memory:d4000000-d7ffffff ioport:dc00(size=12 memory:fbd80000-fbdfffff

  Read the article

• Temporary boot problem after thunder storm - likely causes?

  - by alastairs

  The village where I live was sat under a thunder cloud for most of Friday, and we suffered a few power fluctuations (specifically, what seemed to be split-second outages). When I got back home from work, I found that my PCs had shut down during one of these outages. When I went to boot one of them back up, I couldn't get anything to display on screen, nor did the boot seem to complete correctly. I tried a number of things - unplugging different bits of hardware, swapping graphics adaptors, etc. - to no avail. I thought I was looking at a fried motherboard or CPU. Power seemed to be distributed correctly to the peripherals (the drives all appeared to be working) so I figured it couldn't be the PSU. Eventually I unplugged it from the mains and left it overnight (approx 12hrs unplugged). I tried it again this morning, and it booted up correctly. Woo-hoo! I have all my equipment protected by surge-protected power strips, so I don't think a spike caused these problems. Obviously it has something to do with the power fluctuations, and maybe the PSU in the problem machine got itself confused somehow. The questions are, for future reference and to help people with similar problems: What are the likely causes of the boot failure I experienced? Is a UPS a simple and cost-effective solution, or might other things help prevent this happening in future? What UPS can you recommend (my budget is limited)?

  Read the article

• Name resolution not working with ipv6 on centos

  - by jolivier

  I just installed CentOs 6.3 on a server to be installed in a data center, but cannot get name resolution / curl to work. I know this is because of it trying to use ipv6, since ping google.com works, curl -4 google.com works, but not curl google.com. I removed the ipv6 adress from the interface and it does not change anything. This is very problematic since most system tools like yum fail at name resolution currently. Browsers like Firefox work because they might be using another tool for name resolution than the one use by curl. I managed to fix this on workstations by completely disabling ipv6 following tutorials like this one / hardcoding name resolution in /etc/hosts. But since I am here configuring a server which will be later installed in a remote data center, I would like not to mess up, understand what is going on and fix it properly. Besides, I will face the same issue with more servers to come so I would really appreciate your help in understanding this problem and how to solve it. I would be happy to provide more information if needed to help understand what is going on. The current network configuration is a small enterprise network, with a DNS server (let's call it A) configured once a long time ago. dig google.com and dig -4 google.com are both refused by the A DNS. But this is also true for my workstation on which curl is working (and yes they both use the same A DNS server). Indeed this faulty server and my workstation have multiple nameservers in /etc/resolv.conf, and the second one is working fine for both of them, so if I remove A from my resolv.conf everything works fine! Regards, Olivier

  Read the article

• emacs error: "Symbol's value as variable is void: hostname"

  - by Florian Pilz

  After I installed emacs this error occurs every time on startup. It prevents me from installing plugins, e.g. auctex via aptitude. I already tried to install a plugin by hand (rails for ruby), but doesn't work. The error doesn't contain the message "hostname", but the hostname of my PC is displayed ("bloodredangel-ubuntu"). I changed my hostname to "bloodredangel", but the error message stays the same. While I changed my hostname I saw that in /etc/hostname were two entries: 127.0.0.1 bloodredangel-ubuntu I already asked this question in an ubuntu forum but they couldn't help. They recognised an misconfigured /etc/hosts file, which I corrected, but from time to time these incorrect configurations get attached by something. I didn't add them by hand, maybe it has something to do with the issue. The misconfigurations looked like this: 127.0.0.1 127.0.0.1 bloodredangel-ubuntu localhost.localdomain localhost 127.0.0.1 127.0.0.1:8080 bloodredangel-ubuntu localhost.localdomain localhost I didn't found a solution on the internet, so I hope I will find help here finally.

  Read the article

• VPN Trunk Between Cisco ASA 5520 and DrayTek Vigor 2930

  - by David Heggie

  I'm a bit of a VPN newbie, so please go easy on me ... I'm trying to use the VPN trunking capabilities of the DrayTek Vigor 2930 firewall to bond two IPSec VPN connections to a Cisco ASA 5520 device and I'm getting myself tied in knots and hope someone here with more knowledge / experience can help. I have a remote site with two ADSL connections and the DrayTek box. The main office site has the Cisco ASA device. I am able to setup a single IPSec connection between the two sites on either of the ADSL connections' public IP addresses, but as soon as I try to use the VPN bonding, nothing works. The VPN tunnels are both still up, but the traffic is getting lost somewhere. I suspect it's due to the ASA not knowing how to route the traffic back over the VPN - one minute, traffic from my remote office's network is coming from public ip address #1, the next it's coming from public address #2 and it doesn't know what to do. Well, that's my newbie impression of what's going wrong, but I don't really know: If this is really what's happening If what I'm trying to do (bond two VPN connections from a single remote network to improve the bandwidth / resiliency) is possible with the kit I've got Could anyone help?

  Read the article

• Slow INFORMATION_SCHEMA query

  - by Thomas

  We have a .NET Windows application that runs the following query on login to get some information about the database: SELECT t.TABLE_NAME, ISNULL(pk_ccu.COLUMN_NAME,'') PK, ISNULL(fk_ccu.COLUMN_NAME,'') FK FROM INFORMATION_SCHEMA.TABLES t LEFT JOIN INFORMATION_SCHEMA.TABLE_CONSTRAINTS pk_tc ON pk_tc.TABLE_NAME = t.TABLE_NAME AND pk_tc.CONSTRAINT_TYPE = 'PRIMARY KEY' LEFT JOIN INFORMATION_SCHEMA.CONSTRAINT_COLUMN_USAGE pk_ccu ON pk_ccu.CONSTRAINT_NAME = pk_tc.CONSTRAINT_NAME LEFT JOIN INFORMATION_SCHEMA.TABLE_CONSTRAINTS fk_tc ON fk_tc.TABLE_NAME = t.TABLE_NAME AND fk_tc.CONSTRAINT_TYPE = 'FOREIGN KEY' LEFT JOIN INFORMATION_SCHEMA.CONSTRAINT_COLUMN_USAGE fk_ccu ON fk_ccu.CONSTRAINT_NAME = fk_tc.CONSTRAINT_NAME Usually this runs in a couple seconds, but on one server running SQL Server 2000, it is taking over four minutes to run. I ran it with the execution plan enabled, and the results are huge, but this part caught my eye (it won't let me post an image): http://img35.imageshack.us/i/plank.png/ I then updated the statistics on all of the tables that were mentioned in the execution plan: update statistics sysobjects update statistics syscolumns update statistics systypes update statistics master..spt_values update statistics sysreferences But that didn't help. The index tuning wizard doesn't help either, because it doesn't let me select system tables. There is nothing else running on this server, so nothing else could be slowing it down. What else can I do to diagnose or fix the problem on that server?

  Read the article

• Connection reset by peer: mod_fcgid: error reading data from FastCGI server Issues

  - by user145857

  Help is greatly needed for our server. We are experiencing random "Connection reset by peer: mod_fcgid: error reading data from FastCGI server" errors which cause a 500 internal server error. If the page is then reloaded it loads normally as it should. We are running MPM Worker with mod FCGID to handle PHP. We had APC cache enabled but disabled it recently to see if it would fix the problem, but the random mod FCGID errors are still continuing. No other opcode cache is active now. Our settings are below: <IfModule worker.c> MinSpareThreads 25 MaxSpareThreads 150 ThreadsPerChild 25 ThreadLimit 100 ServerLimit 700 MaxClients 700 MaxRequestsPerChild 0 </IfModule> <IfModule mod_fcgid.c> FcgidMaxRequestLen 1073741824 FcgidMaxRequestsPerProcess 2000 FcgidMaxProcessesPerClass 100 FcgidMinProcessesPerClass 0 FcgidConnectTimeout 300 FcgidIOTimeout 900 FcgidFixPathinfo 1 FcgidIdleTimeout 300 FcgidIdleScanInterval 120 FcgidBusyTimeout 300 FcgidBusyScanInterval 120 FcgidErrorScanInterval 12 FcgidZombieScanInterval 12 FcgidProcessLifeTime 3600 </IfModule> The server is a 64 core 2.1 GHZ 94 GB RAM so it has some power. Some of the fcgid timeout settings are higher because we run large reports which take up to 15 minutes. Any help is greatly appreciated! Just to clarify, the random fcgid errors are occurring when a user clicks a page on our site and the 500 error page loads instantly. This is random and occurrs less than 1% of the time but it is still an issue.

  Read the article

• Flushing iptables broke my pipe, how can I save my instance?

  - by Niels

  I was setting up my iptables when I performed a iptables -F and my ssh pipe broke. This is the last output of my session: root@alfapaints:~# iptables -L Chain INPUT (policy DROP) target prot opt source destination ACCEPT all -- anywhere anywhere ACCEPT tcp -- anywhere anywhere state NEW,ESTABLISHED tcp dpt:2222 ACCEPT tcp -- li465-68.members.linode.com anywhere state NEW,ESTABLISHED tcp dpt:nrpe ACCEPT tcp -- anywhere anywhere tcp dpt:9200 state NEW,ESTABLISHED ACCEPT tcp -- anywhere anywhere tcp dpt:http state NEW,ESTABLISHED ACCEPT udp -- anywhere anywhere udp spt:domain Chain FORWARD (policy DROP) target prot opt source destination Chain OUTPUT (policy DROP) target prot opt source destination ACCEPT all -- anywhere anywhere ACCEPT tcp -- anywhere anywhere state ESTABLISHED tcp spt:2222 ACCEPT tcp -- anywhere anywhere state ESTABLISHED tcp spt:nrpe ACCEPT tcp -- anywhere anywhere tcp spt:9200 state ESTABLISHED ACCEPT tcp -- anywhere anywhere tcp spt:http state ESTABLISHED ACCEPT udp -- anywhere anywhere udp dpt:domain root@alfapaints:~# iptables -F Write failed: Broken pipe I tested my connection just before and I was able to connect with ssh. Now I did a nmap scan and not a single port is open anymore. I know my VPS is running on VMWare ESXi, could a reboot help? Or if not could I attach and mount the disk to another vm to save the data? Does anybody have some advise? And maybe an explanation what happend or what could have cause my pipe to break? ps: I didn't save my rules on the config directories of iptables. But used a file I stored in ~/rules.config to apply my rules like this: iptables-restore < rules.config So probably a reboot would help? Thanks a lot in advance.

  Read the article

• KVM network bridge with two NICs

  - by Eil

  Greetings, I'm trying to set up bridged networking with KVM and am getting nowhere. There are docs and tutorials on the subject, but they all seem to conflict or don't provide enough info. I was wondering if someone can give me a high-level overview of how to get this working. I can probably work out the details myself (configuring the interfaces, adding routes, etc), I just need help on the big picture: how everything is interconnected. I have a RHEL5 server with KVM installed and running. It has two physical NICs, eth0 and eth1 in the same VLAN. I would like to use eth1 for all traffic between the guests and the rest of the network and reserve eth0 for host management, guest migrations, etc if possible. I'm not picky about which one gets the default route, although it would be nice if we could make it eth0. All of the guests will have static IPs. I would prefer that when a new guest is added, the networking configuration only needs to be set from within the guest itself. Basically, I want this: eth0: all host traffic eth1: all guest traffic Open to any other suggestions if this isn't possible or will be kludgy/difficult. Pointers to existing documentation might not be helpful since I've already been though just about everything out there. Thanks for any help.

  Read the article

• Static noise in headphones

  - by John Murdoch

  I have a Asus P6T based system. I was using the on-board sound (plugging in Logitech X-230 2.1 analog speakers in the green "front speakers" 3.5mm analog output, then plugging in my headphones in that). I was quite happy with the sound quality (didn't hear any static noise if volume was turned down to my normal listening level). Then about a week ago I started having terrible static noise from the left channel, and no normal audio on that left channel. Right channel had more static noise than usual but did have a bit of sound. I tried using the AC'97 in front of my case but that seemed to have no signal. I decided my on-board sound card has gone bad and bought an internal sound card to replace it (Startech 7.1Ch PCI). This fixed the "no sound from left channel problem", but I had much more audible static noise. I decided the card was low quality and/or it had interference from all the other things happening inside the computer case, and bought a Sweex SC016 external USB sound card. But even with that I have static noise in headphones. Positioning the USB sound card differently doesn't seem to help. Trying the other analog outputs (e.g., surround) doesn't help. The static noise in all cases is proportional to the volume. I have tried different headphones, but the situation is situation though perhaps the flavour of the static noise changes slightly. So what are my options? a) Get another, more expensive, external USB sound card hoping the quality will improve? b) Get another, more expensive, internal sound card (PCIe 1x perhaps) hoping the quality will improve? c) Get a dedicated DAC box? d) Get some Hi-Fi earphones? Suggestions? tl;dr - Two different sound cards both still have static noise in headphones.

  Read the article

• Checkpoint VPN-1 R60 and Windows 7 64 Bit Client

  - by Mohit

  As per my knowledge of checkpoint VPN-1. My company is using checkpoint VPN-1 R 60 ( I guess as I dont know how to check server version) Firewall(VPN Server). Now the problem is that I installed Windows 7 64 bit. But, after my research I found that there are not even one client (SecuRemote/SecuClient) for Win7 64 bit, when Firewall or server is R60. I thought of some open source solutions. Can you guys please suggest me some with the configuration required. As of now, I know the IP of the server. I know my username and password using which I connect and that is not my domain password. that i can confirm to you guys. I am not a network guy. I am more of a developer. But, I need some help in this.So, let me know if I can provide you more details. Please please i need urgent help on this.

  Read the article

• Cisco QoS Guidence

  - by Kyle Brandt

  I have a 10M connection to the internet that is hooked into a 100M port. I am getting started with QoS, and am hopping for a little guidance on setting it up on a Cisco 3825 router. Right now I am going forward with the idea that I have to implement it on my router, and the provider can't provide QoS for me. How I envision it working is that the QoS will drop or queue packets on my router and that will help prevent a situation where the provider has to start dropping a lot of packets. Right now all I am tasked with is making sure that one of the 3 LANs gets a certain slice (say 3M for Gig Lan1) of the 10M internet connection (But ideally this will be more flexible in the Future). 10M Internet on 100M port on HWIC-4ESW +-----------------------+ | | Gig Lan1 | Cisco 3825 | Lan3 on HWIC-4ESW | | +-----------------------+ Gig Lan2 I need to learn more about QoS, but having a target technology and maybe example configuration will help me wrap my head around the reading I am doing a little more. Which Cisco QoS Technology do you recommend for this particular situation? Have a basic sample config of how this might work? Right now the 10M line is not congested, so this more to have something in place in case it starts to become mildly congested in the future.

  Read the article

• reverse proxy not rewriting to https

  - by polishpt

  I need your help. I'm having problems with reverse proxy rewriting to https: I have an alfresco app running on top of tomcat and as a front and an Apache server - it's site-enabled looks like that: <VirtualHost *:80> ServerName alfresco JkMount /* ajp13_worker <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined ServerSignature Off </VirtualHost> I also have a reverse proxy server running on second machine and i want it to rewrite queries to https. It's site-enabled looks like that: <VirtualHost 192.168.251.50:80> ServerName alfresco DocumentRoot /var/www/ RewriteEngine on RewriteRule (.*) https://alfresco/ [R] LogLevel warn ErrorLog /var/log/apache2/alfresco-80-error.log CustomLog /var/log/apache2/alfresco-80-access.log combined ServerSignature Off </VirtualHost> <VirtualHost 192.168.251.50:443> ServerName alfresco DocumentRoot /var/www/ SSLEngine On SSLProxyEngine On SSLCertificateFile /etc/ssl/certs/alfresco.pem SSLCertificateKeyFile /etc/ssl/private/alfresco.key SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown \ downgrade-1.0 force-response-1.0 ProxyRequests Off ProxyPreserveHost On <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass /alfresco http://192.168.251.50:8080/alfresco ProxyPassReverse /alfresco http://192.168.251.50:8080/alfresco LogLevel warn ErrorLog /var/log/apache2/alfresco-443-error.log CustomLog /var/log/apache2/alfresco-443-access.log combined ServerSignature Off </VirtualHost> Now, ProxyPass works, when I go to alfresco/alfrsco in a browser application opens, but rewriting to https doesn't work. Plese help. Regards when I go to 192.168.251.50 Tomcat configuration page shows up. When I go to 192.268.251.50:8080 - the same as above when I go to 192.168.251.50:8080/alfresco - alfresco app page shows app when I go to alfresco/alfresco - same as above when i go to https://alfresco or https://alfresco i get an error connecting to a server

  Read the article

• How to reset the postgres super user password on mac os x

  - by Andrew Barinov

  I installed postgres on my mac running 10.6.8 and I would like to reset the password for the postgres user (I believe this is the super user password) and then restart it. All the directions I found do not work because I think my user name is not recognized by pg as having authority to change the password. (I am on the admin account of my mac) Here is what I tried: Larson-2:~ larson$ psql -U postgres Password for user postgres: psql (9.0.4, server 9.1.2) WARNING: psql version 9.0, server version 9.1. Some psql features might not work. Type "help" for help. postgres=# ALTER USER postgres with password 'mypassword' postgres-# \q and for restart I did: Larson-2:~ larson$ su postgres -c 'pg_ctl -D /opt/local/var/db/postgresql84/defaultdb/ restart > Which didn't work, as the password remained the same as it was before. Can someone provide directions for doing this and for making sure it's recognized by PG? Update I went ahead and edited the pg_hba.conf file located in /Library/PostgreSQL/9.1/data and set the settings as follows: # TYPE DATABASE USER ADDRESS METHOD # "local" is for Unix domain socket connections only local all all trust # IPv4 local connections: host all all 127.0.0.1/32 trust # IPv6 local connections: host all all ::1/128 trust However, like before, the password stayed the same after I changed it. I am not sure what further steps I can take from here.

  Read the article

• "Path Not Found" when attempting to write to a sub folder within a mapped drive

  - by Adam

  We have an interesting issue with one of our server shares, or possibly, our Win 7 desktops. When our users try to save files in a sub folder, either via copy/paste or through an application, to a mapped drive on our DC they receive an error saying "Path not found". They can however browse this folder and open files from it. This is where the "Path Not Found" error doesn't seem to stack up in my opinion. Users can however save files fine in the root folder of the mapped drive, it appears only to affect sub folders. It seems to be random which users and machines this affects. The users can log on to a different machine and be able to save in sub folders fine, on the same mapped drive. Event viewer hasn't been much help either. Currently, the only solution we have found is to image the machines affected which solves the issue. Our servers are Server 2008 R2 with Win 7 Pro desktops. Any help/pointers/suggestions would greatly be appreciated.

  Read the article

< Previous Page | 391 392 393 394 395 396 397 398 399 400 401 402  | Next Page >