Search Results

Search found 16784 results on 672 pages for 'white box'.

Page 395/672 | < Previous Page | 391 392 393 394 395 396 397 398 399 400 401 402  | Next Page >

• Host a subdomain from an IIS7 server on another server

  - by brennanmur

  I am running a network with two server, one running SBS 2008 which hosts a majority of the network services (DNS, DHCP, Exchange, IIS, DC, AD...), including the primary webpage at mydomain.com. The other server is a linux box running an apache web server. I'm trying to set the apache server to host the site site2.mydomain.com. I have changed the DNS settings on the first server so that site2.mydomain.com can be accessed from the internal network, but I cannot access site2.mydomain.com from the internet. I have tried using server farms and application request routing cache, as described on this page, http://forums.iis.net/t/1156458.aspx, but I still can't access site2.mydomain.com from the internet. I don't have much experience with web servers, I usually just administer local networks, so I'm not sure if I'm going about this the right way. Any help or suggestions would be much appreciated.

  Read the article

• Lost USB BlueTooth Dongle for Keyboard and Mouse

  - by Tyndall

  I lost my USB bluetooth dongle (from HP) which I used for a wireless keyboard and mouse. They came together in a set when I bought my last HP computer. Are the keyboard and mouse useless now? or will any bluetooth dongle allow them to work? If I can just buy a new one - any recommendations on a replacement (good price, and perhaps works with Windows and Ubuntu out-of-the-box? Forgive me if this is an easy question. I'm just not that familiar with wireless mice/keyboards.

  Read the article

• does the *physical* order/location of drives in a mdadm-managed RAID-10 array matter?

  - by locuse

  i've setup a 4-drive RAID-10 array using mdadm-managed, software-raid on an x86_64 box. it'd up & running and works as expected, cat /proc/mdstat md127 : active raid10 sdc2[2] sdd2[3] sda2[0] sdb2[1] 1951397888 blocks super 1.2 512K chunks 2 far-copies [4/4] [UUUU] bitmap: 9/466 pages [36KB], 2048KB chunk atm the four SATA drives are physically plugged into the motherboard's 1st four SATA ports. i'd like to gather the necessary/complete info for catastrophic recovery. reading starting here, http://neil.brown.name/blog, and the mailing list, i'm not yet completely confident i have it right. i understand 'drive order matters'. is that logical, &/or physical order that matters? if i unplugged the four drives in this array, and plugged them each back into different ports on the motherboard or a pci card, as long as i've changed nothing in software config, will the array correctly auto-re-assemble?

  Read the article

• IM and File Transfers Integrated With VoIP

  - by Ehtyar

  I have an Asterisk box serving an office of people. I'd like to provide instant messaging and file sharing capabilities alongside the voice and video capabilities provided by Asterisk (ala Windows Live Messenger, Skype etc). Asterisk does not seem to offer IM outside the context of a SIP call, nor am I aware that it provides file transferring capabilities whatsoever. The clients will be using Jitsi, so there are many protocols to choose from, but I'd like to provide as much integration as possible between the VoIP and IM/file transfer (ideally a single account that facilitates voice/video and IM/file transfer). Is this possible, and if not, what would be the most appropriate alternative? Thank you.

  Read the article

• MySQL will Stop working after being Started

  - by user115343

  i am new to a webserver thing. I use Centmin mod to install nginx + mariaDB to setup small wordpress blog,the first day it is ok,there are nice "hello world" on my box's IP,but today i have checked that mysql is stop working so i immediately start it again but it is stoped again after some minutes! i use this tutorial but still,it will stop after some period here is my log [root@rylai ~]# tail -f /var/log/mysqld.log 120326 16:19:05 [Note] Plugin 'PBXT_STATISTICS' is disabled. 120326 16:19:05 [Note] Plugin 'InnoDB' is disabled. 120326 16:19:06 [Note] Event Scheduler: Loaded 0 events 120326 16:19:06 [Note] /usr/sbin/mysqld: ready for connections. Version: '5.2.10-MariaDB-mariadb107' socket: '/var/lib/mysql/mysql.sock' port: 3306 (MariaDB - http://mariadb.com/) 120326 16:20:36 mysqld_safe Number of processes running now: 0 120326 16:20:36 mysqld_safe mysqld restarted 120326 16:20:39 [Note] Plugin 'ARCHIVE' is disabled. 120326 16:20:39 [Note] Plugin 'FEDERATED' is disabled. 120326 16:20:40 mysqld_safe mysqld from pid file /var/lib/mysql/rylai.pid ended I only access mysql on CLI,didnt install any panel yet

  Read the article

• suggestions for migrating a windows 7 install to a new 4K sector disk

  - by myCubeIsMyCell

  Hi, I'm looking to upgrade the disk on a windows 7 box to a new larger drive. In the past for such migrations I'd just hook both drives up and use a linux boot disk and use dd to copy from one disk to the next... boot up the new drive & expand the partition. The drive I just purchased however is a western digital using 4k sectors... not sure if there'd be any complications using my old method moving from a 512b sector drive. Current plan is to try the migration by doing a win7 system image backup to an external drive... then restore the image to the new drive via system restore boot disk. Any suggestions or recommendations on how to best complete this migration would be greatly appreciated. Thanks!

  Read the article

• Data Validation of a Comma Delimited List

  - by Brad

  I need a simple way of taking a comma seperated list in a cell, and providing a drop down box to select one of them. For Example, the cell could contain: 24, 32, 40, 48, 56, 64 And in a further cell, using Data Validation, I want to provide a drop-down list to select ONE of those values I need to do this without VBA or Macros please. Apolgies, I want this to work with Excel 2010 and later. I have been playing around with counting the number of commas in the list and then trying to split this into a number of rows of single numbers etc with no joy yet.

  Read the article

• How can I keep gnu screen from becoming unresponsive after losing my SSH connection?

  - by Mikey

  I use a VPN tunnel to connect to my work network and then SSH to connect to my work PC running cygwin. Once logged in I can attach to a screen session and everything works great. Now, after a while, I walk away from my computer and sooner or later, the VPN tunnel times out. The SSH connection on each end eventually times out and then I eventually come back to my computer to do some work. Theoretically, this should be a simple matter of just restarting the VPN, reconnecting via SSH, and then running "screen -r -d". However apparently when the sshd daemon times out on the cygwin PC, it leaves the screen session in some kind of hung state. I can reproduce a similar hung state by clicking the close box on a cygwin bash shell window while it's running a screen session. Is there any way to get the screen session to recover once this has happened, so that I don't lose anything?

  Read the article

• why do Vagrant docs suggest using public IP address 33.33.33.10 for local VMs?

  - by Gert

  I'm following a tutorial to set up vagrant (a tool to build and configure portable virtual machine images), and it seems that vagrant documentation suggests using IPv4 address 33.33.33.10 to configure a new box. That is a publicly routed IP adress, so I'm a bit confused why using this address is suggested. Since I don't own this network, I should not use an address from the 33.33.33.10/8 range. Am I correct in thinking that I should only use either a public address from a network I own, or an address from one of the private ranges as defined in RFC 1918? If so, why does Vagrant documentation suggest otherwise?

  Read the article

• Debian 5 is randomly shutting down.

  - by revofreak

  My debian 5 vps is suffering from random shutdowns. I reinstalled it several times, the hosts moved me to a different physical box, check the install image and said everyone else also uses it and is fine. Heres the output from syslog Mar 27 00:19:19 noobintraining-1 -- MARK -- Mar 27 00:32:01 noobintraining-1 shutdown[18142]: shutting down for system halt Mar 27 00:32:06 noobintraining-1 init: Switching to runlevel: 0 Mar 27 00:32:06 noobintraining-1 xinetd[15907]: Exiting... Mar 27 00:32:07 noobintraining-1 named[15865]: received control channel command 'stop -p' Mar 27 00:32:07 noobintraining-1 named[15865]: shutting down: flushing changes Mar 27 00:32:07 noobintraining-1 named[15865]: stopping command channel on 127.0.0.1#953 Mar 27 00:32:07 noobintraining-1 named[15865]: stopping command channel on ::1#953 Mar 27 00:32:07 noobintraining-1 named[15865]: no longer listening on ::#53 Mar 27 00:32:07 noobintraining-1 named[15865]: no longer listening on 127.0.0.1#53 Mar 27 00:32:07 noobintraining-1 named[15865]: no longer listening on 89.238.172.132#53 Mar 27 00:32:07 noobintraining-1 named[15865]: exiting Mar 27 00:32:07 noobintraining-1 exiting on signal 15 Any help is most appreciated!

  Read the article

• How to query a DHCP server to get the local DNS servers

  - by Dan Berlyoung

  I have a ClarkConnect (CentOS based) box running as my home router on a RR connection. I had the DNS servers set up to use Google's DNS server. I want to change them back to the local DNS servers but I can't find an obvious/easy way to get those address short of a) reconfiguring the router's network to DHCP them (would rather not interrupt everyone) or b) calling their tech support (kill me now!). Is there a command line tool/command I can use to query the DHCP server on the external NIC to see what DNS servers it would set me up with w/o munging my existing setup?

  Read the article

• Where to obtain openssl-devel for SunOS 5.10

  - by user35949

  So I am having an issue that I have seen other people have on many different systems. I have to build Subversion on a SunOS 5.10 box and have run into issues. I have the openssl source code installed and in the subversion-1.6.9 folder, I run the following: ./configure --with-ssl --with-libs=/opt/exp/lib/openssl/lib and receive the error: checking for library containing RSA_new... not found configure: error: could not find library containing RSA_new configure failed for neon I have also tried running the command without the "lib" on the end of the --with-libs path. I read online that I need the openssl-devel packages, but I have been unable to find them for SunOS 5.10, and they do not show up already installed on my system when running pkginfo. I have looked online including http://www.sunfreeware.com/ which I was told was a good SunOS software source. Any help you can provide would be welcomed. Thanks, Sean

  Read the article

• Is it possible to have zsh+keychain+tmux not ask for keys?

  - by Wayne Werner

  I'm using tmux and zsh, and I've recently been learning about ssh-agent and keychain. From the manpage for zsh, it says that it will source .zlogin only if the shell is, well, a login shell. Following advice I read, I stuck keychain --clear in my .zlogin, which worked perfectly. When I logged into the box I had to unlock my key. However, each time I create a new window in tmux, it clears/makes me re-add my key. This is a little annoying... but I can understand it if, in fact, each new tmux window is a login window. I haven't been able to find much help outside of the manpages on this topic. So is each new tmux window a login shell, or is there any way that I can make it not clear my keys only when I create a tmux window?

  Read the article

• Exclude path from Windows 7 search?

  - by Jez

  It's really quite incredible how bad Windows 7's search seems to be. The latest problem I have with it is that I want to search for filenames including the string "user", so I go to the directory I want to search in (C:\Users\jez\testing), type *user* in the search box, and hit enter. It gives me... every single file. Because "user" is in the path of every file, with everything being under "C:\Users..." OK, this is useless. Is there a way to just search for the string within files rather than their paths, or do I need to download some decent 3rd party search software?

  Read the article

• Run a command from Windows 7 Start Menu

  - by Abhijeet Patel

  I'm trying to run commands such as "cmd.exe", "appwiz.cpl" etc by typing it in the Search box of the Start Menu in Windows 7 (x86). I'm able to do this just fine in Vista. After typing in "cmd" I notice that I see a link to "Programs" in the start menu so it seems that "cmd" is being recognized but when I click on "Programs" link which is shown,I get the following message. "These files can't be opened. Your internet security settings prevented one or more files from being opened" P.S. - I'm not looking for enabling the "Run" command to show in the Start Menu Any help would be much appreciated

  Read the article

• How to make addin visible on toolbar by script or batch process?

  - by David.Chu.ca

  I have an addin for Excel 2003. I tried to use MSDN's vbs script to make it installed, see my previous post question. It seems working as addin, but it does not displayed on toolbar when it is first installed on a box. What I have to do is to go to Tools-Add-Ins.. to uncheck my addin, for example myAddin, and then go back to the same dialog window again to check it. I think there must be somewhere Excel has config settings in xml or registry? Any way to run a script to set this addin visible in toolbar?

  Read the article

• Need help connecting to SRW2024 Linksys Switch from CentOS 5.4

  - by sxanness

  I am configured a Linksys SRW2024, I accidently changed the management VLAN before changing the VLAN configuration thus I can no longer access it with the net. The only way I have read to get into it now is via a console cable, my laptop with me is a MacBook Pro with no Serial port connection, apart from driving around a town that I am unfamilar with to find an adapter I thought I would try on a Linux box. I have a CentOS 5.4 server here (PowerEdge R300) that I am trying to use to talk to the switch. I tried minicom first but I do not see the console. Another site suggested the screen command. I tried "screen /dev/ttyS0 38400" but all I get is blinking curser, I do not see the configuration. I don't know if anyone here as any tips but I hope someone does. Thank You,

  Read the article

• Windows 2008 additional disk going offline with reboots on Amazon EC2

  - by Ernest Mueller

  OK, so I took the stock Windows 2008 64-bit Amazon AMI and wanted to add a D: drive for page file space and crash dumps. I launched the instance with a second EBS volume attached as xvdf and went into Disk Management set it online, and added the page file and crash dump settings and all that works. But when I reboot, the box comes back up with that second drive as "Offline." How do I get that disk to automatically come online on reboot (or most notably, when I turn this into an AMI and launch more instances off it - I've tried that too and same deal with the D:).

  Read the article

• Connect to wired and wireless networks at same time, Ubuntu

  - by Gary Chambers

  Currently, I have a media PC running Ubuntu 10.04 that I am trying to connect via a wired network cable directly to a NAS box, and wirelessly to the router. This works no problem after I run sudo /etc/init.d/networking restart but I can't get both interfaces to come up on system startup. My /etc/network/interfaces file reads as follows: auto eth0 iface eth0 inet static address 10.0.1.2 netmask 255.255.254.0 broadcast 10.0.1.255 network 10.0.1.0 auto wlan2 iface wlan2 inet dhcp As I say, I know this works, because I can get it to work by restarting the network interfaces, but I can't bring them both up on system startup. Does anyone know why this might be?

  Read the article

• This operation has been cancelled due to restrictions in effect on this computer

  - by Dan

  I have this HUGELY irritating problem on Windows 7 (x64). Whenever I click on ANY link (that exists on a Word document, Excel or Outlook), I get an alert box with the message: This operation has been canceled due to restrictions in effect on this computer I have been scouring my settings and the Internet for a solution, but to no avail. What is the reason for this problem? It even happens when I click anchors in word document. That is, I can't even click on an entry in a Table of Contents to go to the appropriate page - I get this same error then. Is this a Windows 7 thing? Is there any way to turn this off?

  Read the article

• How do I unmount a charging device in Linux?

  - by PeanutsMonkey

  I have a mobile device attached via USB to a Linux box and wish to unmount it. I ran the command fdisk -l however it does not list a mount point. I then ran the command lsusb which yielded the screenshot below. I then proceeded to search the /dev/disk/by-id directory and was found the following file The file is a symbolic link to what appears to be /dev/sdc Questions Why does it not appear when I run the command fdisk -l? How do I unmount it properly without simply yanking the USB cord from the USB port?

  Read the article

• monitor just what's going on -on a firewall

  - by bbutle01

  I have this little snapgear firewall. It's a little purpose built box running a custom linux, SH4 processor @240 Mhz, 64MB of ram. Basically how close we are to capacity is a mystery to me. I know I can run top and see the status of all the processes, but how can I see just how much of the processor is going to passing data... and how to estimate when I'm going to need to upgrade, and by tweaking iptables rules, how does that help/hurt the processor. suggestions?

  Read the article

• EC2 server in VPC stops responding after joining domain

  - by Geoff

  We have a EC2 Windows Server set up and running in our VPC, connected to our network via a Juniper 5GT. This is working well, with the tunnel up and stable. If I then join the server to our local domain, it appears to work - I can then log on using domain credentials, and use domain accounts when applying security to folders etc. After I log out, if I give it around an hour, the box becomes unresponsive. I can't ping it, although a tracert goes all the way barring the last hop - so the tunnel is ok. I can't RDP into it. If I reboot it, then it works for a while before doing the same thing. Un-joining it from the domain fixes the problem, and it stays up and stable. The event logs don't show anything obvious, at least to me. Any ideas?

  Read the article

• Why would a FaceBook application "work" on a profile, but not a page?

  - by edt

  I made a FaceBook application that works fine on profiles, but I can't figure out how to get it to show on a FaceBook page. For example, after I visit the application canvas URL, allow the application, then edit application settings and "add" to box and tab view... I cannot click the "plus" symbol to the left of the tabs in order to add a tab for the application. It does not appear in the list of available applications. Meanwhile, the application is working/showing up on profiles with no issues. I DID check the "Installable to Pages" checkbox on the application (authentication tab) settings. What could cause this? Here is the application canvas URL: http://apps.facebook.com/russian_girls/

  Read the article

• Ubuntu VPN Server (PPTPD) Configuration - Pass Traffic to Internet

  - by SnAzBaZ

  I am trying to configure PPTPD on my Ubuntu box to pass all VPN traffic through to it's internet connection, so I essentially want it to work like a Proxy. I think the problem is that no default gateway is being assigned to my PPTP client (Windows 7). I can connect to the VPN fine, I get an IP address and DNS servers but no default gateway. Do I need to configure a specific option to tell the VPN server to forward all traffic it receives down it's eth0 port and out to the internet. Thanks!

  Read the article

< Previous Page | 391 392 393 394 395 396 397 398 399 400 401 402  | Next Page >