Search Results

Search found 21184 results on 848 pages for 'cable internet'.

Page 396/848 | < Previous Page | 392 393 394 395 396 397 398 399 400 401 402 403  | Next Page >

• What is an Acer Converter Port?

  - by ShadowHero

  What is this port "Acer Converter Port"? Very little information can be found on the internet. It's basically the same as miniDP? Can I connect a monitor like Dell U2713H on this one? EDIT From this page: http://acer.custhelp.com/app/answers/detail/a_id/30837/~/frequently-asked-questions-on-the-aspire-r7-series 9. Can I connect a DisplayPort monitor to the Acer Converter Port? The Acer Converter Port uses the same physical port as a Mini DisplayPort, but is designed to connect to an Acer proprietary cable. If you connect a DisplayPort monitor, Acer cannot guarantee the functionality of the monitor. No damage should occur to either monitor or notebook by connecting a Mini DisplayPort cable. So, the question is, can someone confirm this will work for sure?

  Read the article

• pptp server 2003 hands out gateway from nic not dhcp server

  - by Pete

  I have created a pptp RRAS server for a handful of clients to connect to. I would like them to use the servers default gateway (.1) for internet access. They are able to successfully connect (& see LAN) but it then cuts them off the internet. I understand that all internet traffic would be routed through the pptp server but that's ok since I have enough pipe. The problem seems to be that: the clients gateway shows as their assigned RAS ip. The clients assigned DNS settings seem to be what is set to the servers nic not what I have specified in dhcp (which is the same server). DHCP relay agent properties points to the nic DHCP is running on (192.168.100.163). .1 is gateway in nic hw properties & dhcp. I have different dns secondary & third entries on my nic properties than what dhcp is configured for. The problem is that I have a 10.10.1.x network that people can not see if they uncheck the gateway option but, they are then unable to see our other hosted sites on the internet.

  Read the article

• How to send Bluetooth audio to non-Bluetooth speakers?

  - by wonsungi

  In short, I am looking for a Bluetooth-3.5 mini stereo converter. What is this type of device called, and what are some of the best models (is there a difference in audio quality/lag)? I wish to connect some speakers (Altec Lansing inMotion IM7), which does not support Bluetooth, to my laptop (Lenovo X301) wirelessly. Currently, I can connect my laptop's headphone jack to the AUX jack on my speakers via a mini stereo cable. How do I replace this cable with some type of Bluetooth setup? I am not sure what this Bluetooth device is called. I thought I found something, but it actually does the opposite of what I need (3.5 mini stereo-Bluetooth). (My OS is Vista Enterprise, if that matters)

  Read the article

• Manually forcing TCP connection to retry

  - by Vi.

  I have a TCP connection (SSH session to some computer for example) Network suddenly goes down and drops all packets (disconnected cable, out of range). TCP resends packets again and again, retrying with increasing delays. I see the problem and plug the cable back (or restore network somehow). TCP connection finally successfully resends some packet and continues. The problem is that I need to wait for a some timeout on point 5. I want to use my opened SSH session now and not wait for 5-10 seconds until it finds out that connection is working again. How to force all TCP connections to resend data without delays in GNU/Linux?

  Read the article

• Changing Vim Home Directory

  - by mcaaltuntas

  Previously I've been using vim without any problems. However a few months ago our company made some network and security updates. After that whenever I plug a network cable into my laptop, it creates a network shared drive "H" with my company name and when I try to open vim it doesn't load plugins and other things that are in my vim home directory. I have found the reason but I don't know how to solve it. The problem is that these network updates changed our HOME directory. When I write: echo $HOME It prints H. Before plugging in a network cable my home was C:\Users\blabla. How can I change my HOME variable? When I run set it prints: C:\Windows\System32>set | findstr /R "^HOME" HOMEDRIVE=H: HOMEPATH=\ HOMESHARE=\\companyname\blabla\username$

  Read the article

• How do I hookup a dual video card Crossfire rig to a single monitor?

  - by Alexed

  I just received a new Alienware box preinstalled with two nice shiny ATI 6950 graphics cards. My goal is to use both of them to give me really good resolution and frame rate on my single monitor. There's zero documentation with the Alienware box and nothing I can find online. Do I just plug the monitor into one of the cards, and expect the two cards to do magic internally? The ATI Crossfire website indicates a need for an "external crossfirex connection cable". Do I need to buy one of these? If so, what kind of cable is it? The AMD Catalyst Control Center shows the second card as "Linked" but when I go to the AMD Overdrive section, the second card is at zero temperature, and clock, suggesting it's not actually doing anything. What do I need to do to make use of both cards? Is it something that doesn't kick in until I do something graphically intensive?

  Read the article

• Monitor has yellow tint when used with the graphics card

  - by artknish

  I have an nVIDIA graphics card when used produces an yellow tint on my monitor's display. I tried with another monitor and it had the same issue. I then switched back to my motherboard's inbuilt graphics output (not sure what the technical term is), and the display seems fine, except I can't get the optimal resolution of 1440x900 to work. So is my graphics card's life over? Or can I get it repaired? Any self remedies without calling a hardware guy? Should I try with a DVI cable? I've been using the VGA cable from my graphics card to the monitor so far. Thanks for your suggestions!

  Read the article

• Multiple Routers, Failover, DHCP and multiple gateways. NOT WAN-failover

  - by u_b

  I've had a look around google and this forum but could not find an answer to my question. So probably one of you can help me a little. My intended setup is: Router R1: wan connection to isp. connected backup server. provides some wireless SSID. other connected devices like printer, laptop, etc. both wired and wireless. Router R2: no wan connection to isp but connected to R2. connects mp3-streamer and music server. also serves as a wireless access point with same SSID. other than described connections only wireless connections. I would like to be able to control music even if R1 is off, e.g. with no internet connection. On the other hand I would like to access internet also in the case that R2 is off, i.e. no music access. Last but not least I would like to stream internet radio, i.e., R1 and R2 are on, and music is streamed from internet to R1 to R2 to streamer. I would like to realize all this using DHCP (also using static assignments) so i do not have to configure statically on android, laptop, etc. So my questions are: Can I make DHCP provide a list of two default gateways R1,R2? In order to make clients fallback to other gateway if currently assigned gateway is turned off? Thanks in advance, u_b

  Read the article

• How can you convert audio (3.5mm) to S/PDIF?

  - by SSumner

  I have a monitor that I want to use as my 'TV' for my gaming system. I connect it via HDMI, so sound and video go through the monitor, but I want sound to my headphones, which travels via optical (S/PDIF) cable. The monitor (Dell U2713HM) has a 3.5mm audio jack on it for line out, but I couldn't find anything that simply plugs in an converts the analog audio signal to a digital one so I can plug in a S/PDIF cable. What sort of device do I need to do this? (I am not asking for shopping recommendations, merely what options allow this conversion. I would prefer the smallest option, as space is limited).

  Read the article

• parallel to usb driver windows 7 dot matrix printer

  - by user975234

  I recently built a new Core i5 system with Windows 7 Professional. I had planned to hook up my TVS MSP 250 XL printer using a USB to parallel cable Once I plug the cable in, Windows 7 recognizes it as an IEEE-1284 controller and automatically installs the appropriate driver. However, in the status window it reports the following: "USB Printing Support -- Ready to use" "No Printer Attached -- Ready to use" When I then go ahead and manually add the printer using the "virtual printer port for USB" I can add the printer seemingly without problem. Once finished, it appears in the Devices and Printers panel. Yet, all attempts to print on this printer fail. It appears that simply no data is sent to the printer (either by programs like word or adobe or by attempting to print a test page. Does anybody know how to fix this?

  Read the article

• Has anyone had luck getting an external hard drive working with a PCMCIA USB card?

  - by Carl

  I would like to know if anyone has had any success in getting and external 2.5" IDE hard drive in an external case (w/USB cable) working when plugged into a PCMCIA USB card. My hard drive doesn't work when plugged into my HT-Link Cardbus/PCMCIA USB 2.0 2-port card (NEC / 32-bit). My MP3 player will work fine when plugged into it. I tried plugging in both of the USB cables that are one one end (Y cable), and it doesn't make a difference. I read the problem may be insufficient power.

  Read the article

• Can irssi ignore the 24h dsl-reconnect

  - by mcnesium

  A couple of weeks ago I had to switch my ISP from cable to DSL. Now I have this ridiculous disconnect and reconnect every 24h. It's no big deal insofar as having a new IP address every day, but for one exception. Since I host my irssi screen on a machine inside the LAN, my history gets affected by the reconnect in terms of a topic announcement, the users in each channel, creation date and so on. It's about 10 lines of redundant content every day. This is annoying especially in channels with very little traffic, because you hardly see the actual content in line with the every-day-junk. So I was wondering if I can tell irssi to silently ignore the reconnection details, so that my only meta-content in each channel goes back to "Day changed to ...", like back in the days of cable-internet.

  Read the article

• Proxmox: VMs and different public IPs

  - by Raj

  I have a server which has two NICs and both are directly connected to internet. I have five different public IP addresses available for the VMs. The host machine (Proxmox) doesn't need to use any (it'll use a private IP and that's all) but will have internet connection. I've gone through the Proxmox documentation and I'm not able to understand the big picture to set up the right network configuration for my needs. In short, what I have is: One server (Proxmox, host machine) On that server, 5 VMs are created 5 public IP addresses available (one for each VM), let's say: 80.123.21.1, 80.123.21.2, 80.123.21.3, 80.123.21.4, 80.123.21.5 What I have now for the host is the following: auto lo iface lo inet loopback auto eth0 iface eth0 inet manual auto eth1 iface eth1 inet manual auto vmbr0 iface vmbr0 inet static address 192.168.1.101 netmask 255.255.255.0 bridge_ports eth0 bridge_stp off bridge_fd 0 auto vmbr1 iface vmbr1 inet manual It can be reached from the internal network, so that's OK. It has internet connection, which is also OK. vmbr1 is going to be used by the VMs. Each VM will have its own IP on his network interfaces configuration file. For some reason, VMs will not have internet and they won't be able to have public IP address. If I use NAT, it will work correctly, but they will not use the public allocated IP addresses for them. Am I missing something?

  Read the article

• Laptop white screen on power-up. Still displays via HDMI output

  - by Inno

  my wife's laptop recently started displaying a white screen. It doesn't show post or anything, just a white screen when it's powered on. However, it works normally with HDMI output to our television. I took it apart and fiddled with both ends of the display cable, but I either didn't fiddle correctly or that's just not the problem. I also noticed that the screen won't turn off anymore when the laptop is closed. Is there a name for the mechanism that controls this function, so I can try and locate it? My guesses are that the problem lies with the screen itself or the display cable, but I'm curious if there's anything else I might be overlooking. Also of note is that the left hinge is partially broken. The corner of the plastic computer case broke off, so the hinge is exposed and doesn't stay in place. I've tried holding it in place, wiggling it around, tapping various parts of the computer, but the white screen remains.

  Read the article

• Can I mix CAT5 and CAT6?

  - by Jason94

  I'm thinking of upgrading the "backbone" of my network, taking a CAT6 cable from my router (DLINK DIR-655 (has cat6 ports)) to a gigabit swith in the tv rom (25m). I have two devices there that uses network (xbox and tvbox, both of them have cat5). Will my net be downgraded to 100mbit as max speed, or will I get 1 gigabit between my router and switch, and 100mbit between tvbox and xbox? From back in the days i have a tool to create my cat5 cable (the plug tool thingy), can I use this for my cat6 too?

  Read the article

• Can't reliably ping 6224 router from directly-attached system

  - by David Mackintosh

  OK, here's my situation. This is on the internet. The 6224 is the router in this picture and physically resides in Kanata. Both VLAN 1697 and 3994 are provided by an internet service provider. These VLANs are provided through a single 1Gb ethernet wire. The Kanata hosts are directly attached to the 6224; the other two sites are remote. VLAN 3994 is a single IP address space, so theoretically it shouldn't matter physically where the hosts on that subnet are. Here's the problem. I have a monitoring system which is connected further into the internet, so probes from the monitor would come in to this diagram on the 1697 VLAN. When I ping hosts at Albert or Bells Corners from the internet, there is 0 loss. The connection looks perfect. When I ping hosts at Kanata, I lose anywhere from 10 to 40% of the pings. The loss is not predictable, but: when I do lose them, I always lose at least 3, usually 4, rarely more, pings in a bunch. I have attached a monitor directly to the 6224 in Kanata on 3994.. When the monitor pings the 6224 routing interface, I see exactly the same loss pattern -- but NOT at the same time as the loss from the remote system. Ping time is around 1ms. When the monitor pings another system directly attached to the 6224, there is 0 loss. Ping time is about 0.1ms, one-tenth of the time to ping the router. Anyone know what is going on here?

  Read the article

• CPU fan making noise. heat sink or replace...

  - by user32185

  CPU fan is making noise ...i figured out reasons: Cable is hitting the fan causing a vibration. And may be also CPU fan is loose causing vibration... suggest options... i cleaned the fan ...but found that there is no heatsink compound /paste between processor and the fan..is it ok ..should i apply heat sink compound. How to correct the cable vibration... My processor is p4 2.4 ghz motherboard intel 845gvsr if i have to buy new fan ..which brand should i go for ..and estimated cost ?!

  Read the article

• Is it safe to use an IDE to SATA power adapter for an extended period of time?

  - by qwertymk

  I just bought a computer from HP and they failed to include SATA power connectors with the power supply other then the one HD and DVD drive. Meanwhile I have two IDE to SATA power adapters that came with my "USB 2.0 to SATA/IDE cable" http://www.amazon.com/USB-2-0-SATA-Cable-Adapter/dp/B001OORN06 3rd pic on the left. I was wondering if I would just open up my computer and use it to plug it my SATA drives to the IDE power sources and mount it to the motherboard, would it damage my drives in the long run or have any other significant effects. A friend told me he knows people who have had their HD burn out because of this

  Read the article

• How can I disable the network detection on Windows 7?

  - by Mad Scientist

  I have a computer running Windows 7 that shares some files on the network. This works fine for a while until for some unknown reason the computer decides that it is connected to a new, unknown public network and disables the file sharing capabilites. Nothing physically changes with the computer, it is still connected to the same network via ethernet cable. But it does misidentify the network every other day, just plugging out the ethernet cable and putting it back in leads Windows to correctly identify the work network and enabling the share again. Is there some way to stop Windows from trying to identify the network automatically, and just tell it that the network on that computer will never change?

  Read the article

• How to make Microsoft JVM work on Windows 7?

  - by rics

  I am struggling with the following problem. I cannot install MS JVM 3810 properly on Windows 7. When I start Interner Explorer 8 without starting any java 1.1 programs choosing Java custom settings under Internet options causes the crash of the browser. I have some Java 1.1 programs that work well in Internet Explorer 8 on Windows XP after the installation of MS JVM 3810. I know that it is not advised to use this old JVM but it is not a short-term option to port the programs in newer Java since it contains 3rd party components. Complete rewrite is a long-term plan. Strangely jview and appletviewer (jview /a) works from a console so the MS JVM 3810 is not completely busted just IE 8 does not like it. The problem with the appletviewer is that it cannot connect to the server even if both signed and unsigned content in Java custom settings have been set to Enable all. (Since Java custom settings was unreachable due to the crash the modifications - including My computer - were performed through the registry and pre-checked to behave correctly on Windows XP and Internet Explorer 8.) If jview was working then I could at least think of a workaround. Is there a way to configure MS JVM or jview properly on Windows 7? Another options would be: Checking Internet Explorer 9 Beta. Using virtualbox and Windows XP older IE in it. Delaying Windows 7 upgrade. ... Update Finally we have modified all the programs to work parallelly as applet and application as well. This way the programs can still be used from browser on older Windows versions. On Windows 7 the applications are started from the desktop. Installation to all user machine can easily be solved since they already have a large common application drive. The code update is fortunately only a few lines of modification: including a main method in the applet class. Furthermore instead of the starting html page a bat file is used to set the classpath before the startup with jview.

  Read the article

• Do 24pin motherboard wires have to be in a certain order?

  - by jasondavis

  I am wanting to sleeve all the wires in my new PC. On my 24pin motherboard connection cable, I must remove the end plastic connector piece from all the wires to sleeve them all individually. I have a couple questions about this cable though. 1) When I put all the wires back into the connector, must they be in the same order they are in now? 2) I have taken a low quality iphone photo below so you cannot see to well, but in a couple spots I marked with arrows, there is actually 2 wires going into a single slot. I am not sure what to do with those, do all 24pin motherboard connectors have some slots where 2 wires go in like that?

  Read the article

• Are all SATA cables compatible with SATA 3?

  - by Jim Fell

  I have a HP Compaq de5700 Small Form Factor desktop computer, and I am looking to upgrade it's hard drive. When I open up the box, it clearly has available SATA connectors on the motherboard, but no indication as to which SATA version (1, 2, or 3). The hard drive I am considering is a SATA 3. My concern is that if the motherboard also supports SATA 3 and I use an old SATA cable (v1 or v2), might there be problems? This is a bare drive, so I don't expect that a cable will come with it, and I have not been able to find the manual for this machine. Thanks.

  Read the article

• Windows 7 Line In Delay Issue [closed]

  - by CheeseConQueso

  Not sure if this question should be posted on a different stack exchange site, so if you find that it should not be posted here, please move it. Either way, if you know the solution, please advise. I'm running Windows 7 Pro 32-bit on my Dell Latitude 2100 netbook and I'm having an issue with the line in device/driver/functionality. The device & driver are stock: Driver Date: 7/13/2009 Driver Version: 6.1.7600.16385 I'm almost sure that the manufacturer of the sound card is RealTek. The problem is that there is a delay (when monitoring input) between the source and the speakers. My setup is bass guitar running through a 12' long instrument cable (1/4") with a 1/4" female to 1/8" male adapter into the line in port on the computer. Then the 15' long headphones/line out cable goes into a standard set of powered speakers. How do I get rid of this delay? Thanks for any help.

  Read the article

• Dell eSATAp not working with some SATA disks

  - by pistache

  I have a Dell Inspiron XPS 15 (L502X) laptop, with an eSATAp port. I also have a Western Digital 1TB 3"5 SATA drive, that I'd like to use with the laptop. I bought a eSATAp <- SATA 22-pin cable (from Delock). When I use this cable my 3"5 HDD does NOT power up, no spin up. I thought that it's just this HDD taking too much power from the motherboard. However, I tested too with my 2"5 SATA HDD and it works successfully. Now the weird thing is that this 2"5 HDD takes 1.1A at 5V, and that the 3"5 HDD takes 0.7A at 5V. I don't understand why it can't work. Is there anything I could do for it to work ? What is really the problem ? Thanks for your help, Hugo

  Read the article

• Share laptop wifi with router

  - by obie

  I hi guys i'm trying to accomplish something: i have a modem (ADSL) which servers as a wireless router as well. There's a laptop connected to it through cable. On the other room i have a laptop which is connected through the router wirelessly. Now the problem is, since i have other appliances that need to get connected but are not wifi cable i have another wifi router. What i want to know is how can i share the second laptop's wifi with the second router so that the router can then serve as an access point to give internet to my other applinaces through ethernet cables. so in breaf i want: INTERNETMODEM (WIFI)LAPTOP 1 (WIFI)LAPTOP 2 (WIFI)Router 2 (ETHERNET)DREAMBOX & WDTV

  Read the article

< Previous Page | 392 393 394 395 396 397 398 399 400 401 402 403  | Next Page >