Search Results

Search found 20009 results on 801 pages for 'microsoft visio 2013'.

Page 396/801 | < Previous Page | 392 393 394 395 396 397 398 399 400 401 402 403  | Next Page >

• Windows Server 2008 R2 network adapter stops working, requires hard reboot

  - by Geoff Dalgas

  TL;DR version: Turns out this was a Windows Server 2008 R2 kernel networking bug. After siccing Microsoft support on it, we (eventually) got an unpublished kernel hotfix from Microsoft to address it. If you, too, are experiencing mysterious low-level network driver failures requiring a reboot/bluescreen cycle, you might want that hotfix (or maybe Service Pack 1 whenever it is released, too.) We have been using HAProxy along with heartbeat from the Linux-HA project. We are using two linux instances to provide a failover. Each server has with their own public IP and a single IP which is shared between the two using a virtual interface (eth1:1) at IP: 69.59.196.211 The virtual interface (eth1:1) IP 69.59.196.211 is configured as the gateway for the windows servers behind them and we use ip_forwarding to route traffic. We are experiencing an occasional network outage on one of our windows servers behind our linux gateways. HAProxy will detect the server is offline which we can verify by remoting to the failed server and attempting to ping the gateway: Pinging 69.59.196.211 with 32 bytes of data: Reply from 69.59.196.220: Destination host unreachable. Running arp -a on this failed server shows that there is no entry for the gateway address (69.59.196.211): Interface: 69.59.196.220 --- 0xa Internet Address Physical Address Type 69.59.196.161 00-26-88-63-c7-80 dynamic 69.59.196.210 00-15-5d-0a-3e-0e dynamic 69.59.196.212 00-21-5e-4d-45-c9 dynamic 69.59.196.213 00-15-5d-00-b2-0d dynamic 69.59.196.215 00-21-5e-4d-61-1a dynamic 69.59.196.217 00-21-5e-4d-2c-e8 dynamic 69.59.196.219 00-21-5e-4d-38-e5 dynamic 69.59.196.221 00-15-5d-00-b2-0d dynamic 69.59.196.222 00-15-5d-0a-3e-09 dynamic 69.59.196.223 ff-ff-ff-ff-ff-ff static 224.0.0.22 01-00-5e-00-00-16 static 224.0.0.252 01-00-5e-00-00-fc static 225.0.0.1 01-00-5e-00-00-01 static On our linux gateway instances arp -a shows: peak-colo-196-220.peak.org (69.59.196.220) at <incomplete> on eth1 stackoverflow.com (69.59.196.212) at 00:21:5e:4d:45:c9 [ether] on eth1 peak-colo-196-215.peak.org (69.59.196.215) at 00:21:5e:4d:61:1a [ether] on eth1 peak-colo-196-219.peak.org (69.59.196.219) at 00:21:5e:4d:38:e5 [ether] on eth1 peak-colo-196-222.peak.org (69.59.196.222) at 00:15:5d:0a:3e:09 [ether] on eth1 peak-colo-196-209.peak.org (69.59.196.209) at 00:26:88:63:c7:80 [ether] on eth1 peak-colo-196-217.peak.org (69.59.196.217) at 00:21:5e:4d:2c:e8 [ether] on eth1 Why would arp occasionally set the entry for this failed server as <incomplete>? Should we be defining our arp entries statically? I've always left arp alone since it works 99% of the time, but in this one instance it appears to be failing. Are there any additional troubleshooting steps we can take help resolve this issue? THINGS WE HAVE TRIED I added a static arp entry for testing on one of the linux gateways which still didn't help. root@haproxy2:~# arp -a peak-colo-196-215.peak.org (69.59.196.215) at 00:21:5e:4d:61:1a [ether] on eth1 peak-colo-196-221.peak.org (69.59.196.221) at 00:15:5d:00:b2:0d [ether] on eth1 stackoverflow.com (69.59.196.212) at 00:21:5e:4d:45:c9 [ether] on eth1 peak-colo-196-219.peak.org (69.59.196.219) at 00:21:5e:4d:38:e5 [ether] on eth1 peak-colo-196-209.peak.org (69.59.196.209) at 00:26:88:63:c7:80 [ether] on eth1 peak-colo-196-217.peak.org (69.59.196.217) at 00:21:5e:4d:2c:e8 [ether] on eth1 peak-colo-196-220.peak.org (69.59.196.220) at 00:21:5e:4d:30:8d [ether] PERM on eth1 root@haproxy2:~# arp -i eth1 -s 69.59.196.220 00:21:5e:4d:30:8d root@haproxy2:~# ping 69.59.196.220 PING 69.59.196.220 (69.59.196.220) 56(84) bytes of data. --- 69.59.196.220 ping statistics --- 7 packets transmitted, 0 received, 100% packet loss, time 6006ms Rebooting the windows web server solves this issue temporarily with no other changes to the network but our experience shows this issue will come back. Swapping network cards and switches I noticed the link light on the port of the switch for the failed windows server was running at 100Mb instead of 1Gb on the failed interface. I moved the cable to several other open ports and the link indicated 100Mb for each port that I tried. I also swapped the cable with the same result. I tried changing the properties of the network card in windows and the server locked up and required a hard reset after clicking apply. This windows server has two physical network interfaces so I have swapped the cables and network settings on the two interfaces to see if the problem follows the interface. If the public interface goes down again we will know that it is not an issue with the network card. (We also tried another switch we have on hand, no change) Changing network hardware driver versions We've had the same problem with the latest Broadcom driver, as well as the built-in driver that ships in Windows Server 2008 R2. Replacing network cables As a last ditch effort we remembered another change that occurred was the replacement of all of the patch cords between our servers / switch. We had purchased two sets, one green of lengths 1ft - 3ft for the private interfaces and another set of red cables for the public interfaces. We swapped out all of the public interface patch cables with a different brand and ran our servers without issue for a full week ... aaaaaand then the problem recurred. Disable checksum offload, remove TProxy We also tried disabling TCP/IP checksum offload in the driver, no change. We're now pulling out TProxy and moving to a more traditional x-forwarded-for network arrangement without any fancy IP address rewriting. We'll see if that helps. Switch Virtualization providers On the off chance this was related to Hyper-V in some way (we do host Linux VMs on it), we switched to VMWare Server. No change. Switch host model We've reached the end of our troubleshooting rope and are now formally involving Microsoft support. They recommended changing the host model: http://en.wikipedia.org/wiki/Host_model http://technet.microsoft.com/en-us/magazine/2007.09.cableguy.aspx We did that, and.. we'll see.

  Read the article

• Projected Results

  - by Sylvie MacKenzie, PMP

  Excerpt from PROFIT - ORACLE - by Monica Mehta Yasser Mahmud has seen a revolution in project management over the past decade. During that time, the former Primavera product strategist (who joined Oracle when his company was acquired in 2008) has not only observed a transformation in the way IT systems support corporate projects but the role project portfolio management (PPM) plays in the enterprise. “15 years ago project management was the domain of project management office (PMO),” Mahmud recalls of earlier days. “But over the course of the past decade, we've seen it transform into a mission critical enterprise discipline, that has made Primavera indispensable in the board room. Now, as a senior manager, a board member, or a C-level executive you have direct and complete visibility into what’s kind of going on in the organization—at a level of detail that you're going to consume that information.” Now serving as Oracle’s vice president of product strategy and industry marketing, Mahmud shares his thoughts on how Oracle’s Primavera solutions have evolved and how best-in-class project portfolio management systems can help businesses stay competitive. Profit: What do you feel are the market dynamics that are changing project management today? Mahmud: First, the data explosion. We're generating data at twice the rate at which we can actually store it. The same concept applies for project-intensive organizations. A lot of data is gathered, but what are we really doing with it? Are we turning data into insight? Are we using that insight and turning it into foresight with analytics tools? This is a key driver that will separate the very good companies—the very competitive companies—from those that are not as competitive. Another trend is centered on the explosion of mobile computing. By the year 2013, an estimated 35 percent of the world’s workforce is going to be mobile. That’s one billion people. So the question is not if you're going to go mobile, it’s how fast you are going to go mobile. What kind of impact does that have on how the workforce participates in projects? What worked ten to fifteen years ago is not going to work today. It requires a real rethink around the interfaces and how data is actually presented. Profit: What is the role of project management in this new landscape? Mahmud: We recently conducted a PPM study with the Economist Intelligence Unit centered to determine how important project management is considered within organizations. Our target was primarily CFOs, CIOs, and senior managers and we discovered that while 95 percent of participants believed it critical to their business, only six percent were confident that projects were delivered on time and on budget. That’s a huge gap. Most organizations are looking for efficiency, especially in these volatile financial times. But senior management can’t keep track of every project in a large organization. As a result, executives are attempting to inventory the work being conducted under their watch. What is often needed is a very high-level assessment conducted at the board level to say, “Here are the 50 initiatives that we have underway. How do they line up with our strategic drivers?” This line of questioning can provide early warning that work and strategy are out of alignment; finding the gap between what the business needs to do and the actual performance scorecard. That’s low-hanging fruit for any executive looking to increase efficiency and save money. But it can only be obtained through proper assessment of existing projects—and you need a project system of record to get that done. Over the next decade or so, project management is going to transform into holistic work management. Business leaders will want make sure key projects align with corporate strategy, but also the ability to drill down into daily activity and smaller projects to make sure they line up as well. Keeping employees from working on tasks—even for a few hours—that don’t line up with corporate goals will, in many ways, become a competitive differentiator. Profit: How do all of these market challenges and shifting trends impact Oracle’s Primavera solutions and meeting customers’ needs? Mahmud: For Primavera, it’s a transformation from being a project management application to a PPM system in the enterprise. Also making that system a mission-critical application by connecting to other key applications within the ecosystem, such as the enterprise resource planning (ERP), supply chain, and CRM systems. Analytics have also become a huge component. Business analytics have made Oracle’s Primavera applications pertinent in the boardroom. Now, as a senior manager, a board member, a CXO, CIO, or CEO, you have direct visibility into what’s going on in the organization at a level that you're able to consume that information. In addition, all of this information pairs up really well with your financials and other data. Certainly, when you're an Oracle shop, you have that visibility that you didn’t have before from a project execution perspective. Profit: What new strategies and tools are being implemented to create a more efficient workplace for users? Mahmud: We believe very strongly that just because you call something an enterprise project portfolio management system doesn’t make it so—you have to get people to want to participate in the system. This can’t be mandated down from the top. It simply doesn’t work that way. A truly adoptable solution is one that makes it super easy for all types users to participate, by providing them interfaces where they live. Keeping that in mind, a major area of development has been alternative user interfaces. This is increasingly resulting in the creation of lighter weight, targeted interfaces such as iOS applications, and smartphones interfaces such as for iPhone and Android platform. Profit: How does this translate into the development of Oracle’s Primavera solutions? Mahmud: Let me give you a few examples. We recently announced the launch of our Primavera P6 Team Member application, which is a native iOS application for the iPhone. This interface makes it easier for team members to do their jobs quickly and effectively. Similarly, we introduced the Primavera analytics application, which can be consumed via mobile devices, and when married with Oracle Spatial capabilities, users can get a geographical view of what’s going on and which projects are occurring in various locations around the world. Lastly, we introduced advanced email integration that allows project team members to status work via E-mail. This functionality leverages the fact that users are in E-mail system throughout the day and allows them to status their work without the need to launch the Primavera application. It comes back to a mantra: provide as many alternative user interfaces as possible, so you can give people the ability to work, to participate, to raise issues, to create projects, in the places where they live. Do it in such a way that it’s non-intrusive, do it in such a way that it’s easy and intuitive and they can get it done in a short amount of time. If you do that, workers can get back to doing what they're actually getting paid for.

  Read the article

• web.config transforms not being applied on either publish or build installation package

  - by BenA

  Today I started playing with the web.config transforms in VS 2010. To begin with, I attempted the same hello world example that features in a lot of the blog posts on this topic - updating a connection string. I created the minimal example shown below (and similar to the one found in this blog). The problem is that whenever I do a right-click - "Publish", or a right-click - "Build Deployment Package" on the .csproj file, I'm not getting the correct output. Rather than a transformed web.config, I'm getting no web.config, and instead the two transform files are included. What am I doing wrong? Any help gratefully received! Web.config: <?xml version="1.0"?> <configuration xmlns="http://schemas.microsoft.com/.NetConfiguration/v2.0"> <connectionStrings> <add name="ConnectionString" connectionString="server=(local); initial catalog=myDB; user=xxxx;password=xxxx" providerName="System.Data.SqlClient"/> </connectionStrings> </configuration> Web.debug.config: <?xml version="1.0"?> <configuration xmlns:xdt="http://schemas.microsoft.com/XML-Document-Transform"> <connectionStrings> <add name="ConnectionString" connectionString="server=DebugServer; initial catalog=myDB; user=xxxx;password=xxxx" providerName="System.Data.SqlClient" xdt:Transform="SetAttributes" xdt:Locator="Match(name)"/> </connectionStrings> </configuration> Web.release.config: <?xml version="1.0"?> <configuration xmlns:xdt="http://schemas.microsoft.com/XML-Document-Transform"> <connectionStrings> <add name="ConnectionString" connectionString="server=ReleaseServer; initial catalog=myDB; user=xxxx;password=xxxx" providerName="System.Data.SqlClient" xdt:Transform="SetAttributes" xdt:Locator="Match(name)"/> </connectionStrings> </configuration>

  Read the article

• Why won't binding to a child object property with rdlc Report work in vs2010?

  - by andrej351

  A while ago someone asked how to bind to a child object's property in a rdlc report. Question here. The solution was to use an expression like this: =Fields!ChildObject.Value.SomeProperty I have recently tried to upgrade to version 10 of the reporting libraries (Microsoft.ReportViewer.WebForms and Microsoft.ReportViewer.Common) and for some reason this does not work anymore. I have got the report rendering and displaying all data fine except any which uses this technique. Instead of the property value i get the text: "#Error" Why doesn't this work anymore? Anybody know how to to this in the new version?

  Read the article

• Sql Server SMO connection timeout not working

  - by Uros Calakovic

  I have the following PowerShell code: function Get-SmoConnection { param ([string] $serverName = "", [int] $connectionTimeout = 0) if($serverName.Length -eq 0) { $serverConnection = New-Object ` Microsoft.SqlServer.Management.Common.ServerConnection } else { $serverConnection = New-Object ` Microsoft.SqlServer.Management.Common.ServerConnection($serverName) } if($connectionTimeout -ne 0) { $serverConnection.ConnectTimeout = $connectionTimeout } try { $serverConnection.Connect() $serverConnection } catch [system.Management.Automation.MethodInvocationException] { $null } } $connection = get-smoconnection "ServerName" 2 if($connection -ne $null) { Write-Host $connection.ServerInstance Write-Host $connection.ConnectTimeout } else { Write-Host "Connection could not be established" } It seems to work, except for the part that attempts to set the SMO connection timeout. If the connection is successful, I can verify that ServerConnection.ConnectTimeout is set to 2 (seconds), but when I supply a bogus name for the SQL Server instance, it still attempts to connect to it for ~ 15 seconds (which is I believe the default timeout value). Does anyone have experience with setting SMO connection timeout? Thank you in advance.

  Read the article

• Full text searching in SQL Server 2008 Express Advanced

  - by Iain Macleod

  Hi, I have recently installed SQL Server 2008 Express Edition with Advanced Services on XP Pro but am having trouble getting full text searching to work with an restored database. The database was originally created in SQL Server 2005. When I call a stored proc that uses the full text index then I get the following error: Full-Text Search is not installed, or a full-text component cannot be loaded. This is my db version: Microsoft SQL Server 2008 (RTM) - 10.0.1600.22 (Intel X86) Jul 9 2008 14:43:34 Copyright (c) 1988-2008 Microsoft Corporation Express Edition with Advanced Services on Windows NT 5.1 (Build 2600: Service Pack 3) When I run: SELECT DATABASEPROPERTY('DBNAME','ISFULLTEXTENABLED') I get: 1 Also, when I look in the advanced properties for the db server in Management Studio I see both the "Default Full-Text Language" and "Full-Text Upgrade Option" properties. However, when I go to SQL Server Configuration Manager I don't see the "MSSQLFDLauncher" service. Does anyone know how to get this working? Cheers, Iain

  Read the article

• Combining GPL with MPL and BSD

  - by thr

  I have a software project I want to release under GPLv3, it uses two pieces of code that other parties have developed (one is the DLR by Microsoft, which is under the Microsoft Public License and the other piece of code is under the New BSD License). The BSD licensed code is compiled into the same binary as my code (but none of it is changed) The Ms-PL licensed code is compiled into another assembly next to my code and linked at runtime (and none of it is changed what so ever). Can I release my software under GPLv3 and without any legal problems?

  Read the article

• Way to see all files ever checked into Visual SourceSafe by a user?

  - by Lee Warner

  Is there a way in Microsoft Visual SourceSafe to see all the files I've ever checked-in?

  Read the article

• is there a way to create an item template (t4) installer like the POCO generator?

  - by bryanjonker

  Subject says it all. I want to modify the POCO generation adapter (http://code.msdn.microsoft.com/EFPocoAdapter) to generate my own code. I have the .tt adapters done, but I want to be able to distribute this to coworkers, so they right-click on the model, choose "Generate Code", and my t4 templates appear in the options along with the other choices. Is there an easy way to do this? I found some articles at http://msdn.microsoft.com/en-us/library/tsyyf0yh(VS.80).aspx but it was focused on generic templates, and I'm looking for specifically model templates.

  Read the article

• Media Foundation: another way to call IMFActivate::ShutdownObject?

  - by KenC

  Hi, Here is a question about IMFActivate::ActivateObject and IMFActivate::ShutdownObject in Media Foundation. According to MSDN, the component that calls ActivateObject is responsible for calling ShutdownObject. But there are two examples not following this rule: http://msdn.microsoft.com/en-us/library/dd388503%28VS.85%29.aspx and http://msdn.microsoft.com/en-us/library/dd317912%28VS.85%29.aspx In these two examples, they call ActivateObject and then release IMFActivate interface without calling ShutdownObject method. This is going to lead to memory leaking, right? Or there is another way to release the resource occupied by the object? (Can I use IMFMediaSource::Shutdown to release the object instead of using IMFActivate::ShutdownObject) Thanks in advance.

  Read the article

• Change write-host output color based on foreach if elseif outcome in Powershell

  - by Emo

  I'm trying to change the color of write-host output based on the lastrunoutcome property of SQL Server jobs in Powershell....as in...if a job was successfull, the output of lastrunoutcome is "Success" in green....if failed, then "Failed" in red. I have the script working to get the desired job status...I just don't know how to change the colors. Here's what I have so far: # Check for failed SQL jobs on multiple servers [reflection.assembly]::LoadWithPartialName("Microsoft.SqlServer.Smo") | out-null foreach ($svr in get-content "C:\serverlist2.txt") { $a = get-date $BegDate = (Get-Date $a.AddDays(-1) -f d) + " 12:00:00 AM" $BegDateTrans = [system.datetime]$BegDate write-host $svr $srv=New-Object "Microsoft.SqlServer.Management.Smo.Server" "$svr" $srv.jobserver.jobs | where-object {$_.lastrundate -ge $BegDateTrans -and $_.Name -notlike "????????-????-????-????-????????????"} | format-table name,lastrunoutcome,lastrundate -autosize foreach ($_.lastrunoutcome in $srv.jobserver.jobs) { if ($_.lastrunoutcome = 0) { -forgroundcolor red } else {} } } This seems to be the closest I've gotten...but it's giving me an error of ""LastRunOutcome" is a ReadOnly property." Any help would be greatly appreciated! Thanks! Emo

  Read the article

• .Net installation issue with SqlServerPipelineHost and SqlServer.DtsMsg

  - by Melody Friedenthal

  I added a web service consumer to a vb 2005 Windows app and tried to install it on another computer, which had an earlier version already installed (ClickOnce deployment). An error came up saying I needed to install Microsoft.SqlServer.PipelineHist in the GAC. I added PipelineHost to the list of references and marked it Copy Local = true, rebuilt the solution, published it and tried to install it on that other computer. This time it said I needed to install Microsoft.SqlServer.DtsMsg, however, that component does not show up on my list of .Net components. Where do I go from here? Thank you.

  Read the article

• VB6 ADODB Fails with SQL Compact: Multipe-Step operation generated errors

  - by Belliez

  Hi, I am converting an old application to use SQL Compact database (it works ok with SQ Server 2005 and 2008) and using the following code gives an error when attempting to execute a simple select command: Private Const mSqlProvider As String = "Provider=Microsoft.SQLSERVER.CE.OLEDB.3.5;" Private Const mSqlHost As String = "Data Source=C:\database.sdf;" Private mCmd As ADODB.Command ' For executing SQL' Private mDbConnection As ADODB.Connection Private Sub Command1_Click() Dim DbConnectionString As String DbConnectionString = mSqlProvider & _ mSqlHost Set mDbConnection = New ADODB.Connection mDbConnection.CursorLocation = adUseClient Call mDbConnection.Open(DbConnectionString) If mDbConnection.State = adStateOpen Then Debug.Print (" Database is open") ' Initialise the command object' Set mCmd = New ADODB.Command mCmd.ActiveConnection = mDbConnection End If mCmd.CommandText = "select * from myTable" mCmd.CommandType = adCmdText mCmd.Execute ' FAILS HERE! ' End Sub I have referenced Microsoft ActiveX Data Access Object 6.0 Library in the project. The error I get is: Run-Time error -2147217887 (80040e21) Multipe-Step operation generated errors. Check each status value Just wondering if anyone has any suggestions? Thanks

  Read the article

• MOSS: Creating site templates from publishing sites

  - by nav

  Hi, On my MOSS site I am trying to save a publishing site as a site template. Then create subsites from this template. I am able to sucessfully create the site template and it is populated in the site template gallery. Following these instructions.. http://blah.winsmarts.com/2007-7-All_you_ever_wanted_to_know_about_SharePoint_2007_Site_Templates.aspx But when I try and create a subsite from this template, an error message is displayed stating: The template you have chosen is invalid or cannot be found. at Microsoft.SharePoint.Library.SPRequestInternalClass.ApplyWebTemplate(String bstrUrl, String& bstrWebTemplate, Int32& plWebTemplateId) at Microsoft.SharePoint.Library.SPRequest.ApplyWebTemplate(String bstrUrl, String& bstrWebTemplate, Int32& plWebTemplateId) Any help would be very appreciated, Thanks Nav

  Read the article

• Powershell - Problem with Start-transcript using remoting

  - by Sanjeev

  I have a file transcript-test.ps1 with below contents $log="TestLog{0:yyyyMMdd-HHmm}" -f (Get-Date) $logfile = 'C:\logs\'+$log+'.txt' Start-transcript -path $logfile -force Echo "To test if this message gets logged" Write-host "To test if this message gets logged" logged" Stop-transcript I try to run the script from lets say "box1" and the log file contains the below contents ********** Windows PowerShell Transcript Start Start time: 20110105114050 Username : domain\user Machine : BOX1 (Microsoft Windows NT 5.2.3790 Service Pack 2) ********** Transcript started, output file is C:\logs\TestLog20110105-1140.txt This should get logged in the log file C:\logs\TestLog20110105-1140.txt ********** Windows PowerShell Transcript End End time: 20110105114050 When I run the same script from another machine using below script I don't see any messages in the log file Invoke-command {powershell.exe -ExecutionPolicy Unrestricted -NoProfile -File C:\in ll\transcript-test.ps1} -computername box1 -credential $credential Contents of log file : ********** Windows PowerShell Transcript Start Start time: 20110105114201 Username : OX\qauser Machine : MODESIGNAU1 (Microsoft Windows NT 5.2.3790 Service Pack 2) ********** Windows PowerShell Transcript End End time: 20110105114201 Is there anyway to log the messages from the script to log file when invoked remotely ? Thanks! Sanjeev

  Read the article

• Searching Outlook Global Adress List

  - by MoominTroll

  I'm pulling up the Global Address List from Outlook like so... Microsoft.Office.Interop.Outlook.Application oApp = new Microsoft.Office.Interop.Outlook.Application(); AddressList gal = oApp.Session.GetGlobalAddressList(); ...with the aim of eventually being able to search through this in my own application to retrieve contact information which I can then supply to a method that squirrels off an email. Unfortunately given that my own GAL has about 20K entries in (the customers much more) using a foreach or something simply doesn't work in an acceptable timeframe. I want to pass a string like "Tom" to a method and have it return a list of possible contacts. Is this possible outside of actually opening up Outlook and creating the mail there? Note: There are a couple of other questions similar to this but most seem to have no good answer. I'm hoping I have more luck.

  Read the article

• Linking IronPython to WPF

  - by DonnyD

  I just installed VS2010 and the great new IronPython Tools extension. Currently this extension doesn't yet generate event handlers in code upon double-clicking wpf visual controls. Is there anyone that can provide or point me to an example as to how to code wpf event handlers manually in python. I've had no luck finding any and I am new to visual studio. Upon generating a new ipython wpf project the auto-generated code is: import clr clr.AddReference('PresentationFramework') from System.Windows.Markup import XamlReader from System.Windows import Application from System.IO import FileStream, FileMode app = Application() app.Run(XamlReader.Load(FileStream('WpfApplication7.xaml', FileMode.Open))) and the XAML is: <Window xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Title="WpfApplication7" Height="300" Width="300"> <Button>Click Me</Button> </Window> Any help would be appreciated.

  Read the article

• Async Socket Listener on separate thread - VB.net

  - by TheHockeyGeek

  I am trying to use the code from Microsoft for an Async Socket connection. It appears the listener runs in the main thread locking the GUI. I am new at both socket connections and multi-threading all at the same time. Having a hard time getting my mind wrapped around this all at once. The code used is at http://msdn.microsoft.com/en-us/library/fx6588te.aspx Using this example, how can I move the listener to its own thread? Public Shared Sub Main() ' Data buffer for incoming data. Dim bytes() As Byte = New [Byte](1023) {} ' Establish the local endpoint for the socket. Dim ipHostInfo As IPHostEntry = Dns.GetHostEntry(Dns.GetHostName()) Dim ipAddress As IPAddress = ipHostInfo.AddressList(1) Dim localEndPoint As New IPEndPoint(ipAddress, 11000) ' Create a TCP/IP socket. Dim listener As New Socket(AddressFamily.InterNetwork, SocketType.Stream, ProtocolType.Tcp) ' Bind the socket to the local endpoint and listen for incoming connections. listener.Bind(localEndPoint) listener.Listen(100)

  Read the article

• Aop, Unity, Interceptors and ASP.NET MVC Controller Action Methods

  - by Richard Ev

  Using log4net we would like to log all calls to our ASP.NET MVC controller action methods. The logs should include information about any parameters that were passed to the controller. Rather than hand-coding this in each action method we hope to use an AoP approach with Interceptors via Unity. We already have this working with some other classes that use interfaces (using the InterfaceInterceptor). However, we're not sure how to proceed with our controllers. Should we re-work them slightly to use an interface, or is there a simpler approach? Edit The VirtualMethodInterceptor seems to be the correct approach, however using this results in the following exception: System.ArgumentNullException: Value cannot be null. Parameter name: str at System.Reflection.Emit.DynamicILGenerator.Emit(OpCode opcode, String str) at Microsoft.Practices.ObjectBuilder2.DynamicMethodConstructorStrategy.PreBuildUp(IBuilderContext context) at Microsoft.Practices.ObjectBuilder2.StrategyChain.ExecuteBuildUp(IBuilderContext context)

  Read the article

• How do I use a command line tool to install .net 4 to IIS

  - by tehp

  I'm trying to deploy my WCF RIA services application to our in-house server for testing. I've been following the instructions and comments from this blog site: http://timheuer.com/blog/archive/2009/12/10/tips-to-deploy-ria-services-troubleshoot.aspx At the end someone points to this question: http://stackoverflow.com/questions/1528324/how-to-solve-a-http-error-404-3-not-found-error I've been trying to run that same tool with .net 4.0 but it keeps giving me an error: [Warning]The HTTP namespace reservation already exists. I am running the version of the exe that I found inside of C:\Windows\Microsoft.NET\Framework\v4.0.21006 There is also C:\Windows\Microsoft.NET\Framework\v3.0\Windows Communication Foundation that has (what I assume is) the same exe in it, and I can use it just fine. I've tried to un-install the 3.0 version before installing the 4.0 version, but I am still getting the same warning and failure. Has anyone successfully done this with .net 4.0?

  Read the article

• PHP - preg_match_all - iCalendar - REGEX

  - by aSeptik

  Hi All guys! ;-) i need help with creating a regex for putting all values into an array! assuming we have a huge file full of theese: Classic iCalendar style: so we know that each segment start with BEGIN:VEVENT and end with END:VEVENT ... END:VEVENT BEGIN:VEVENT UID:e3cafdf3-c5c7-427e-b8c3-653015e9321a SUMMARY:Some Text Here DESCRIPTION:Some Text Here\n555-555-555 ORGANIZER;CN=Some/Text/Here DTSTART;TZID="Some/Text/Here":20100802T190000 DTEND;TZID="Some/Text/Here":20100802T193000 STATUS:CONFIRMED CLASS:PUBLIC X-MICROSOFT-CDO-INTENDEDSTATUS:BUSY TRANSP:OPAQUE X-MICROSOFT-DISALLOW-COUNTER:TRUE DTSTAMP:20100423T021222Z SEQUENCE:1 END:VEVENT BEGIN:VEVENT ... by using preg_match_all that i think is the best choice for doing this, what's the regex that can hold all theese values into array!? PS: between segments there are no line break this is just for example! thank's to All for the time! Regards Luca Filosfi

  Read the article

• I can't Open my excel file in c#

  - by Ruben Guico

  Hi, Below is my code, i tried to open my excel file in my c# application but the program give's me an error message "Cannot Access "my excel.xls". But when I specify the file path in my string path variable it works, the problem is I need to get the file path from an openFileDialog. using System; using System.IO; using System.Collections.Generic; using System.Text; using System.Data; using System.Windows.Forms; using System.Data.OleDb; using System.Reflection; using MOIE = Microsoft.Office.Interop.Excel; using OFFICE = Microsoft.Office.Core; namespace EmpUploader { public class ExcelCon { private OleDbDataReader reader = null; private OleDbCommand excelCommand = new OleDbCommand(); private OleDbDataAdapter adapter = new OleDbDataAdapter(); private DataTable excelData = new DataTable(); private MOIE.ApplicationClass objExcel = new MOIE.ApplicationClass(); private MOIE.Workbook wb = null; private string myConn = ""; private string strSQL = ""; private string err = ""; private string path2 = ""; private int sheetCount = 0; private OleDbConnection Con = new OleDbConnection(""); #region "excel interop prarameters" private static object xl_missing = Type.Missing; private static object xl_true = true; private static object xl_false = false; private object xl_update_links = xl_missing; private object xl_read_only = xl_missing; private object xl_format = xl_missing; private object xl_password = xl_missing; private object xl_write_res_password = xl_missing; private object xl_ignore_read_only = xl_missing; private object xl_origin = xl_missing; private object xl_delimiter = xl_missing; private object xl_editable = xl_missing; private object xl_notify = xl_missing; private object xl_converter = xl_missing; private object xl_add_to_mru = xl_missing; private object xl_local = xl_missing; private object xl_corrupt_load = xl_missing; #endregion } //MY CODE FOR OPENING THE EXCEL //note that my file path came from an openfiledialog public void InitializeConnection(string path) { //connection string for excel myConn = @"Provider=Microsoft.Jet.OLEDB.4.0; Data Source=" + path + "; Extended Properties =Excel 8.0"; Con.ConnectionString = myConn; Con.Open(); //this is the sample specified path that worked when i test my application //path = @"C:\shinetsu p5 emp list.xls"; objExcel.Visible = false; wb = objExcel.Workbooks.Open(path, xl_update_links, xl_read_only, xl_format, xl_password, xl_write_res_password, xl_ignore_read_only, xl_origin, xl_delimiter, xl_editable, xl_notify, xl_converter, xl_add_to_mru, xl_local, xl_corrupt_load); sheetCount = wb.Worksheets.Count; } }

  Read the article

• Window Size when SizeToContent is not specified

  - by moogs

  When the following XAML used, the window size is not 5000x5000, but some small window where the button is cropped. <Window x:Class="WpfApplication1.Window1" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Title="Window1" > <Button Width="5000" Height="5000">XXX</Button> </Window> From what I can tell, size I did not specify the SizeToContent attribute, the default is "Manual", so it will use *size of a window is determined by other properties, including Width, Height, MaxWidth, MaxHeight, MinWidth, and MinHeight. * From the WPF Windows Overview, it seems those other properties are FrameworkElement::MinHeight/Width, and FrameworkElement::MaxHeight. But since the default for the Mins are 0, the Maxs are Infinity and the Width/Height is Nan....what's going on? Where is WPF getting the window size? Any pointers to the right direction would be appreciated.

  Read the article

• COM interop, Office 2010 x64 and Visual Studio 2010.

  - by Snake

  Hi, I just installed Offic 2010 x64 on my Windows 7 x64 laptop. It already had Visual Studio 2010 on it. Now I try to add Microsoft.Office.Interop.Excel or something to the project, but it just can't find the project. When I try to open a project from the website of Microsoft (a sample of Office development) Visual Studio says that that kind of project is not supported. How is this possible? Is it a problem that I installed x64 of Office? Or is the problem Visual Studio 2010? Thanks

  Read the article

• Escape from DataContext

  - by grayscales

  I have a window that get its data from another class that is passed as DataContext. But I now also want to do data binding within the window. The window looks as follows: <Window x:Class="WpfApplication1.Window1" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Title="Window1" Height="300" Width="300"> <StackPanel> <TextBlock Text="{Binding UserName}" /> <TextBlock x:Name="TestTextBlock">Hello World</TextBlock> <TextBlock x:Name="TestTextBlock2" Text="{Binding ElementName=TestTextBlock,Path=Text}" /> </StackPanel> </Window> The binding between the text blocks TestTextBlock and TestTextBlock2 works fine, but only until I change the DataContext-property of the window. How can I bind between those two textblocks so that changing the DataContext will not break the data binding? Thanks in advance, Stefan

  Read the article

< Previous Page | 392 393 394 395 396 397 398 399 400 401 402 403  | Next Page >