Search Results

Search found 30127 results on 1206 pages for 'home network'.

Page 397/1206 | < Previous Page | 393 394 395 396 397 398 399 400 401 402 403 404  | Next Page >

• Bridging 10GbE with 12.04 - bridging works but the bridging computer has no internet access

  - by Donal

  I have been trying to get 12.04 bridging working with two 10GbE cards. I have 2 10GbE cards in a linux box being used only for this bridge, 1 with 2 10GbaseT ports and another with a single CX4 port. I have 2 client computers connected with 10GbaseT cards and the CX4 card connects to a procurve switch. I can get the bridging happening mostly the way that I want, The clients receive dhcp information from the dhcp server (not the bridging machine) and can connect to and properly see the rest of the network. Speeds are ok, not amazing but working on that is another matter. My problem is that the bridging machine has no internet access ... meaning I can't update anything or apt-get anything It can ping all other machines on the local network. I've tried the helpful hints from: https://help.ubuntu.com/community/NetworkConnectionBridge "Enabling Internet Use on the Bridging Computer" and get the following RTNETLINK answers: File exists but dhclient br0 does nothing for me :( I think if it is anything it a multiple route problem as both br0 and eth4 have ipaddresses ... even though I have only set it up so that br0 has one ... Bridge setup details: /etc/network/interface auto br0 iface br0 inet static address 192.168.0.246 netmask 255.255.255.0 gateway 192.168.0.1 broadcast 192.168.0.255 dns-nameservers 192.168.0.1 dns-search example.com dns-domain example.com #(eth2 & eth3 are the 10GbaseT) #(eth4 is the CX4 connection) pre-up ip link set eth2 down pre-up ip link set eth3 down pre-up ip link set eth4 down pre-up brctl addbr br0 pre-up brctl addif br0 eth4 eth3 eth2 pre-up ip addr flush dev eth3 pre-up ip addr flush dev eth2 pre-up ip addr flush dev eth4 post-down ip link set eth4 down post-down ip link set eth2 down post-down ip link set eth3 down post-down ip link set br0 down post-down brctl delif br0 eth2 eth3 eth4 post-down brctl delbr br0 ifconfig -a br0 Link encap:Ethernet HWaddr 00:15:17:22:20:34 inet addr:192.168.0.102 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::215:17ff:fe22:2034/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4957 errors:0 dropped:0 overruns:0 frame:0 TX packets:1077 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:596320 (596.3 KB) TX bytes:139952 (139.9 KB) eth4 Link encap:Ethernet HWaddr 00:60:dd:47:7c:05 inet addr:192.168.0.57 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::260:ddff:fe47:7c05/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:9000 Metric:1 RX packets:15391 errors:0 dropped:51 overruns:0 frame:0 TX packets:1207 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:5916769 (5.9 MB) TX bytes:154312 (154.3 KB) Interrupt:70 route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth4 0.0.0.0 192.168.0.1 0.0.0.0 UG 100 0 0 br0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 br0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 br0 192.168.0.0 0.0.0.0 255.255.255.0 U 1 0 0 eth4

  Read the article

• How do I edit my resolv.conf file?

  - by Ahatius

  I have the problem that my ubuntu machine uses the wrong dns server. For some reason he queries localhost for dns records. I have added the dns server in the network settings gui, but /etc/resolv.conf still contains 127.0.0.1 as dns server. Now I tought I could just edit the file by myself, but it explicitly says I should not edit the file by hand. Now, since the network settings GUI didn't generate the file with the right settings, how do I generate a new resolv.conf file by myself?

  Read the article

• How to set a Static Route on a Storage Node

  - by csoto

  To set up a host route to an IP address, here are the procedures for BUI and CLI. You need to know the destination, mask, interface and network. Note that, in this case, the values are just examples. CLI - Log into CLI and run the commands below: configuration net routing create set family=IPv4 set destination=203.246.186.80 set mask=32 set gateway=192.168.100.230 set interface=igb0 commit BUI - Log in to the web ui of the ZFSSA NAS head - Click Configuration - Network - Routing - (+) - In the popup window that will be displayed, enter the values accordingly on the popup window shown on the screenshot below: Any of the two above procedures should get your desired route in place.

  Read the article

• Why can't I get a working session with vnc4server

  - by ysap

  We have a couple of (identical) Ubuntu 11.10 machines, configured with gnome-classic, which we use as remote servers, and let our clients log into personal user accounts we create for them using vnc4server. We configured all the machines in the same way, following a short manual we compiled, describing how to download, install and prepare a few tools and our software. The connection usually works fine, but today I set up a fresh machine, and experienced problems. After installing vnc4server, I ran vncpasswd and copied the following startup file to ~/.vnc/xstartup: #!/bin/sh unset SESSION_MANAGER unset DBUS_SESSION_BUS_ADDRESS gnome-session --session=gnome-classic & [ -x /etc/vnc/xstartup ] && exec /etc/vnc/xstartup [ -r $HOME/.Xresources ] && xrdb $HOME/.Xresources xsetroot -solid grey vncconfig -iconic & Then, I started vnc4server and used two viewers (the Ubuntu Remote Desktop Viewer and Windows RealVNC Client) in two other machines, but instead of getting my desktop, I see an empty window with a grey-ish background pattern like this: and the cursor is a bold X. What is wrong with the setup and why don't I get a remote session as expected?

  Read the article

• Iptables Issue can't SSH Remote Machines

  - by Lonston

  I want to SSH to 192.168.1.15 Server from my machine, my ip was 192.168.1.99 Source Destination was UP, with IP 192.168.1.15. This is LAN Network there are 30 Machine's Connected to the network and working fine, I'm Playing around the local machine's cos i need to apply the same rules in Production VPS I have applied the below iptables in my machine 192.168.1.99, Now i can't receive any packets from Outside and i can't send any packets Outside, While applying the Below Chain iptables -P INPUT DROP iptables -P OUTPUT DROP iptables -P FORWARD DROP After the above CHAIN i have added the Below rules and it want to allow ssh from machine to 192.168.1.15 to access the 192.164.1.15 but still i can't access 192.168.1.15 iptables -A INPUT -p tcp -i eth0 --dport 22 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -p tcp -o eth0 --sport 22 -m state --state ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --dport 22 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A INPUT -i eth0 -p tcp --sport 22 -m state --state ESTABLISHED -j ACCEPT Any one Please Check Weather my Rules are Wrigt. Still i can't access the machine 15

  Read the article

• Programmatically adding metatags to Masterpages in Web Forms and MVC [migrated]

  - by Mike Clarke

  Has anyone got any ideas on where we should be adding our SEO metadata in a Web Forms project? Why I ask is that currently I have two main Masterpages, one is the home page and the other one is every other page, they both have the same metadata that’s just a generic description and set of key words about my site. The problem with that is search engines are only picking up my home page and my own search engine displays the same title and description for all results. The other problem is the site is predominantly dynamic so if you type in a search for beach which is a major categories on the site you get 10000 results that all go to different information but all look like a link to the same page to the user. edit It's live here www.themorningtonpeninsula.com

  Read the article

• How do I stop icons appearing on the desktop under conky?

  - by Seamus

  When I download something to my desktop, or insert a CD or flash drive, the icon appears on my desktop. When I have conky running, the icon sometimes appears in the top right corner, underneath conky; where I can't see it. How do I stop this happening? My .conkyrc is pasted below. I didn't write it all myself, so I'm not entirely sure what I need to change, or what parts are relevant for this particular question... # UBUNTU-CONKY # A comprehensive conky script, configured for use on # Ubuntu / Debian Gnome, without the need for any external scripts. # # Based on conky-jc and the default .conkyrc. # INCLUDES: # - tail of /var/log/messages # - netstat shows number of connections from your computer and application/PID making it. Kill spyware! # # -- Pengo # # Create own window instead of using desktop (required in nautilus) own_window yes own_window_type override own_window_transparent yes own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager # Use double buffering (reduces flicker, may not work for everyone) double_buffer yes # fiddle with window use_spacer right # Use Xft? use_xft yes xftfont DejaVu Sans:size=8 xftalpha 0.8 text_buffer_size 2048 # Update interval in seconds update_interval 3.0 # Minimum size of text area # minimum_size 250 5 # Draw shades? draw_shades no # Text stuff draw_outline no # amplifies text if yes draw_borders no uppercase no # set to yes if you want all text to be in uppercase # Stippled borders? stippled_borders 3 # border margins border_margin 9 # border width border_width 10 # Default colors and also border colors, grey90 == #e5e5e5 default_color grey own_window_colour brown own_window_transparent yes # Text alignment, other possible values are commented #alignment top_left alignment top_right #alignment bottom_left #alignment bottom_right # Gap between borders of screen and text gap_x 10 gap_y 20 # stuff after 'TEXT' will be formatted on screen TEXT $color ${color orange}SYSTEM ${hr 2}$color $nodename $sysname $kernel on $machine ${color orange}CPU ${hr 2}$color ${freq}MHz Load: ${loadavg} Temp: ${acpitemp} $cpubar ${cpugraph 000000 ffffff} NAME ${goto 150}PID ${goto 200}CPU% ${goto 250}MEM% ${top name 1} ${goto 150}${top pid 1} ${goto 200}${top cpu 1} ${goto 250}${top mem 1} ${top name 2} ${goto 150}${top pid 2} ${goto 200}${top cpu 2} ${goto 250}${top mem 2} ${top name 3} ${goto 150}${top pid 3} ${goto 200}${top cpu 3} ${goto 250}${top mem 3} ${top name 4} ${goto 150}${top pid 4} ${goto 200}${top cpu 4} ${goto 250}${top mem 4} ${color orange}MEMORY / DISK ${hr 2}$color RAM: $memperc% ${membar 6}$color Swap: $swapperc% ${swapbar 6}$color Home: ${fs_free_perc /home}% ${fs_bar 6 /}$color Free Space: ${fs_free /home} ${color orange}NETWORK (${addr eth0}) ${hr 2}$color Down: $color${downspeed eth0} k/s ${alignr}Up: ${upspeed eth0} k/s ${downspeedgraph eth0 25,140 000000 ff0000} ${alignr}${upspeedgraph eth0 25,140 000000 00ff00}$color Total: ${totaldown eth0} ${alignr}Total: ${totalup eth0} ${execi 30 netstat -ept | grep ESTAB | awk '{print $9}' | cut -d: -f1 | sort | uniq -c | sort -nr} ${color orange}WIRELESS (${addr wlan0}) ${hr 2}$color Down: $color${downspeed wlan0} k/s ${alignr}Up: ${upspeed wlan0} k/s ${downspeedgraph wlan0 25,140 000000 ff0000} ${alignr}${upspeedgraph wlan0 25,140 000000 00ff00}$color Total: ${totaldown wlan0} ${alignr}Total: ${totalup wlan0} ${execi 30 netstat -ept | grep ESTAB | awk '{print $9}' | cut -d: -f1 | sort | uniq -c | sort -nr}

  Read the article

• Installing Cairo to get FastRWeb working for R gWidgetsWWW2 -pkg

  - by hhh

  I want to install FastRWeb for R but it requires some Cairo. How can I install the Cairo? compilation terminated. make: *** [xlib-backend.o] Error 1 ERROR: compilation failed for package ‘Cairo’ * removing ‘/home/xfz/R/i686-pc-linux-gnu-library/2.13/Cairo’ ERROR: dependency ‘Cairo’ is not available for package ‘FastRWeb’ * removing ‘/home/xfz/R/i686-pc-linux-gnu-library/2.13/FastRWeb’ The downloaded packages are in ‘/tmp/Rtmpno8hhF/downloaded_packages’ Warning messages: 1: In install.packages("FastRWeb", , "http://rforge.net/", type = "source") : installation of package 'Cairo' had non-zero exit status 2: In install.packages("FastRWeb", , "http://rforge.net/", type = "source") : installation of package 'FastRWeb' had non-zero exit status I cannot find what the Cairo is here, 16 entries with this search term below. It is apparently some library. $ apt-cache search libcairo|wc 16 132 996 Perhaps related http://stackoverflow.com/questions/9826128/r-making-r-rook-program-into-rscript-program-r http://stackoverflow.com/questions/9812547/r-gui-vizualiser-with-command-line-access-browser-based-letting-users-to-s Some related packages FastRWeb and RServe for the gWidgetsWWW2 -pkg.

  Read the article

• Best way to remote restart Ubuntu from Windows machine

  - by robsoft

  Background: I'm looking to put a series of Ubuntu machines into retail locations, they're being used as dumb kiosks to show a series of slides onto large LCD panel TV screens. Once installed, they won't have a keyboard or mouse connected but will have a fixed IP on the local network. Everything is configured to auto-start, no automatic updates, no power saving etc - I think we're pretty-much good to go apart from one thing. I need the retail staff to be able to restart the boxes if a problem arises. We have VNC running (now that we've turned off desktop enhancements!) so that we can remotely get into the machines if we need to, but that's not something we would allow the retail staff to do. The machines are going to be physically 'out of the way' (probably in the ceiling space) so the power button is not easily accessible!. I'd like to have some means of allowing the retail staff to restart the Ubuntu machine, from the desktop of one of their Windows terminals. I don't really want to give them some kind of raw terminal access (the command line will frighten them!) and I don't want them to use VNC (as stated above). Ideally there would be an icon on the Windows desktop, they double-click it, reply to a simple 'are you sure?' prompt, and then the Ubuntu box is told to restart. The Windows side of that won't be a problem, we can write something using Delphi, Python & Qt4, whatever - it's the Ubuntu side of it I'm stuck with. Out of sight/view, could I have a Windows program open a terminal across the network and tell Ubuntu to restart? Is this what SSH could be used for (I have never set that kind of thing up). The Windows programming side isn't really an issue, it's just that I'm a total Ubuntu noob and don't know where to start from the platform point of view. The other thing we considered is also having the machine automatically restart itself at a set time each day (obviously out of store hours!). To me, that seems a bit unnecessary (though forcing a restart once a week/month might be worthwhile). Any thoughts or suggestions? Being able to restart the box on demand across the network is my prime requirement.

  Read the article

• Can't get into the admin console after migrating to new server

  - by Emerson

  I migrated my WordPress blog to a new server, and everything seemed to be working fine until it started giving me the error when entering the admin area: Fatal error: Allowed memory size of 33554432 bytes exhausted (tried to allocate 4864 bytes) in /home/neworder/public_html/blog/wp-admin/includes/plugin.php on line 729 The line 729 has: $protected = array( '_wp_attached_file', '_wp_attachment_metadata', '_wp_old_slug', '_wp_page_template' ); I had installed the maintenance-mode, and I have suspicions that this is what broke the forum. If I remove the plugin it then gives another error: Fatal error: Allowed memory size of 33554432 bytes exhausted (tried to allocate 19456 bytes) in /home/neworder/public_html/blog/wp-admin/includes/post.php on line 1158 And that line has: $content .= '<p class="hide-if-no-js">' . esc_html__( 'Remove featured image' ) . '</p>'; } I tried to restore the blog file-system from the old server and also to restore the database from the old server (2x), but still it gives me the same error. The blog itself seems to be working fine: http://blog.antinovaordemmundial.com/

  Read the article

• Is the wireless driver from Live USB different from the standard install?

  - by Rafael Magalhães

  Linux newbie here. I've been trying to use Ubuntu (x64) as my main OS since 11.10, but my wireless connection on it has been very unstable, droping every other 5-10 mins. For this reason I see myself forced to use Windows 7 (dual booting), where connection works flawlessly -- which really bothers me. My card is an Atheros 9k, which claims a reasonable amount of wireless complaints on Ubuntu forums. I've tried every suggestion given on past questions to this site but to no avail. However, while running Ubuntu Live USB for some of the tests, I noticed that my wireless connection never failed on it and wondered if its network configuration differs from the one on the default Ubuntu install. If this is the case, how could I reproduce the Live USB network environment on my hard drive install?

  Read the article

• 302 Moved Temporarily or 301?

  - by user11221

  I have a question on redirects. HTTP status code checker tool shows "HTTP/1.1 302 Moved Temporarily" for the home page url http://someurl.com (just a namesake url). Also, this url opens up http://www.someurl.com/general/index. As you can see, a non-www url to a www url redirect is happening. My questions are: Is a 302 redirect acceptable for the home page? Will this affect the site showing up in search results in anyway? Isnt redirection to /general/index a bad practice?

  Read the article

• How to Sync Files Between Computers Without Storing Them in the Cloud

  - by Chris Hoffman

  So you have multiple computers and you want to keep your files in sync, but you don’t want to store them on someone else’s servers. You’ll want a service that synchronizes files directly between your computers. With such a service, you can synchronize an unlimited amount of files and people can’t gain access to your files just by gaining access to an account on a server and viewing the files via the web interface. We’re focused on syncing files over the network here — either over a local network or the Internet. We’re looking for Dropbox-style solutions that don’t store files on a central server like Dropbox does.    

  Read the article

• Changing from one file to another

  - by jbander

  I'm told to go to /home/jbander/Downloads, so how do I do that, I assume you do it in terminal but what do you do next, I can get to home but thats it. How do I go from one directory or file or whatever they are, to another and once I'm there what do I do to see what is in the download file. One more question if I want to change it from e.g. cow to e.g. duck how would I do that(they are just arbitrary names) how do I get rid of cow and how do I put duck in it's place.

  Read the article

• Is it possible to remove a particular host key from known_hosts?

  - by Kaustubh P

  I usually end up deleting the entire known_hosts file, which I have no problems for. But just out of curiosity, Is it possible to remove just a single entry? I opened the known_hosts file, and other han understanding that the file contains fingerprints for a given machine, I ddnt understand anything. Below is the message I faced, which led me to ask this question. Add correct host key in /home/wissen16/.ssh/known_hosts to get rid of this message. Offending key in /home/wissen16/.ssh/known_hosts:1 RSA host key for foo.com has changed and you have requested strict checking. Host key verification failed. Thanks.

  Read the article

• Will Google crawl session based website

  - by DonShwep

  I have a website, it is split into 3 categories but using PHP its an all-in one kind of style. When a user chooses a category on the home page a session is set, this is then used to set the style and contents of the website. Would Googlebot and other bots be able to still scan my website? If a page is accessed and no session is set then the user is sent back to the home page. I have created special links, that set a session but go straight to the contact page. Even this page doesn't seem to be showing up. Any ideas if a sitemap with specially crafted links (to set the session) will help Google?

  Read the article

• Which hidden files and directories do I need?

  - by Sammy Black

  In a previous question, I explained my situation/plan: backing up home directory on external drive, reformatting laptop drive, installing 14.04, putting home directory back. (It hasn't happened yet because I can't seem to find the down time, in case things aren't working right away.) It occurred to me that maybe I don't want all of those hidden files and directories (e.g. .local/share/ubuntuone/syncdaemon/, .cache/google-chrome/, etc.) Just judging by the amount of time in copying, I can tell that some of these hidden directories are large. Question: Are there any hidden directories that I obviously don't need/want when I have the laptop running an updated distribution? Will they cause conflicts? (I plan on copying the backed-up directory tree back onto the laptop with the --no-clobber option.)

  Read the article

• how to make Chromium-browser start on vnc display?

  - by Oleksandr Dudchenko

  I have started Tightvncserver on Lubuntu 12.04 via the command $ tightvncserver -geometry 800x600 -depth 16 :2 VNC server successfully started and I got message like follows. New 'X' desktop is gateway:2 Starting applications specified in /home/dolv/.vnc/xstartup Log file is /home/dolv/.vnc/gateway:2.log Then I've successfully loged in from remote PC using realvncclient. Trying to start Chromium-browser from menu... no luck. There was one more attempt: I opened the LXTerminal from menu. Trying to start is from terminal with the command /usr/bim/chromium-browser & it returned the message like follows: Xlib: extention "RANDR" missing on desktop :2 I have also discovered that after my two attampts the chromium-browser has created 2 new windows on the host on which was session running on display :0 The Question: How to make the browser start on that display from which it was called (in my occasion from vnc session display)?

  Read the article

• Slow on browsing web, but normal when using apt-get

  - by Arif Setyawan

  I have a problem with my fresh instalation of Ubuntu 11.10. The problem happen when i start up my browser and accessing website such google, askubuntu.com, facebook and other sites. frustate on the situation i try watch the progress in system monitor. the result from monitor shows that there is no data transfer when i try to accessing the page. firstly, i assume that it is the trouble from my ISP or my home connection. But it is not. When i try pinging google it shows transaction between my computer and the network but still null from browser. Then i tried to test the aptitude and it was work fine but still the browser won't recieve any packet from the internet. Here is the detail of my tools : Laptop : Toshiba Satellite e205 (network card atheros) Operating System : Ubuntu 11.04 dual booted with Win7 Browser : Mozilla Firefox comes up with the Ubuntu 11.10 installation Chrome : Last version (just yesterday install it) Thank You before :) [this question posted via win]

  Read the article

• Cannot login to newly created user account

  - by penner

  Trying to switch accounts to my newly created account I get a black screen and then it takes me back to the main login screen after entering the correct password. Upon logging into my previously existing account I get: "System Program Problem Detected" Details: Executable path /usr/bin/Xorg Package: xserver-xorg-core 2:1.11.4-0ubuntu10.1 Details: Crash ... (tons more, but no way to copy paste or save) When I try to su su -l penner I get: No directory, logging in with HOME=/ I manually created the home directory and this error goes away but still no luck with the login. Seems something has gone wrong with the user creation? How can I correct this?

  Read the article

• VLC doesnot play any file [ any video/.mp3] in local machine , closes when a file is opened

  - by hsemarap

  When I run vlc from terminal I get: In the VLC dialog box: Your input can't be opened: VLC is unable to open the MRL 'file:///media/Ent/movies/the%20mask.avi'. Check the log for details. In terminal: VLC media player 2.0.1 Twoflower (revision 2.0.1-0-gf432547) [0x8fe8f8] main input error: open of `file/xspf-open:///home/para/.local/share/vlc/ml.xspf' failed [0x8fe8f8] main input error: Your input can't be opened [0x8fe8f8] main input error: VLC is unable to open the MRL 'file/xspf-open:///home/para/.local/share/vlc/ml.xspf'. Check the log for details. [0x8f1aa8] main interface error: no suitable interface module [0x8f9b08] main interface error: no suitable interface module [0x8be008] main libvlc error: option http-user-agent does not exist [0x8be008] main libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface. [0x8f9b08] qt4 interface error: Unable to load extensions module [0x7f5280000b78] main input error: open of `file:///media/Ent/movies/the%20mask.avi' failed [0x8fc718] main playlist error: could not export playlist

  Read the article

• Is it possible to remove a particular host key from SSH's known_hosts file?

  - by Kaustubh P

  I usually end up deleting the entire known_hosts file, which I have no problems for. But just out of curiosity, Is it possible to remove just a single entry? I opened the known_hosts file, and other han understanding that the file contains fingerprints for a given machine, I dont understand anything. Below is the message I faced, which led me to ask this question. Add correct host key in /home/wissen16/.ssh/known_hosts to get rid of this message. Offending key in /home/wissen16/.ssh/known_hosts:1 RSA host key for foo.com has changed and you have requested strict checking. Host key verification failed. Thanks.

  Read the article

• After installing ubuntu 12.04 my internet connection has completely disappeared

  - by Tony

  On my PC after installing Ubuntu 12.04 my networks are completely gone. Inside the terminal, after typing in nm-tool I get the following: The program nm-tool is currently not installed. You can install by typing: sudo apt-get install network-manager After I type that in then my password I get this: Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: network manager : Depends: iputils-arping but it is not going to be installed E: Unable to correct problems, you have held broken packages I'm a complete novice when it comes to computers so I have no clue.

  Read the article

• Netflix Rolls Out Polished New iPhone and Android Apps [Video]

  - by Jason Fitzpatrick

  If you’re a Netflix subscriber, you’ve got a brand spanking new mobile interface to take for a spin. Last week Netflix released a brand new iOS interface, this week it’s a brand new Android interface. The above video showcases the new iOS interface for mobile playback on devices like the iPhone and iPad. The slick new layout makes it even easier to browser new content and resume watching content you’ve paused at home or on the go. For a peek at the new (and similar) Android interface, check out the video below: For more information about the respective apps, visit their download pages to read up and grab a copy. Netflix for Android / iOS How To Create a Customized Windows 7 Installation Disc With Integrated Updates How to Get Pro Features in Windows Home Versions with Third Party Tools HTG Explains: Is ReadyBoost Worth Using?

  Read the article

• Java Spotlight Episode 101: JavaOne 2012 Part 2 - Community Events

  - by Roger Brinkley

  An interview with Martijn Verberg on Adopt A JSR, Nichole Scott and John Yeary on Community, and Hellena O'Dell on the Oracle Musical Festival about community events and happenings at JavaOne 2012. Right-click or Control-click to download this MP3 file. You can also subscribe to the Java Spotlight Podcast Feed to get the latest podcast automatically. If you use iTunes you can open iTunes and subscribe with this link:  Java Spotlight Podcast in iTunes. Show Notes Events Sep 30-Oct 4, JavaONE, San Francisco Oct 3-4, Java Embedded @ JavaONE, San Francisco Oct 15-17, JAX London Oct 30-Nov 1, Arm TechCon, Santa Clara Oct 22-23, Freescale Technology Forum - Japan, Tokyo Oct 31, JFall, Netherlands Nov 2-3, JMagreb, Morocco Nov 13-17, Devoxx, Belgium Feature InterviewAdopt a JSR Adopt a JSR Home Adopt OpenJDK Home LJC's Adopt a JSR jClarity - Java Performance Tuning for the Cloud Community Events at JavaOne User Groups at Oracle World and JavaOne To access the Java User Group content on Sunday, go to the content catalog for JavaOne and filter the search criteria to Sunday sessions Oracle Music Festival

  Read the article

< Previous Page | 393 394 395 396 397 398 399 400 401 402 403 404  | Next Page >