Search Results

Search found 24784 results on 992 pages for 'process integration packs'.

Page 398/992 | < Previous Page | 394 395 396 397 398 399 400 401 402 403 404 405  | Next Page >

• What type of data store should I use for my ios app?

  - by mwiederrecht

  I am pretty new to ios and using servers so forgive me. I am building an ios app for research. I need to monitor things that the user does and then push it up to a server for analysis (yes, with user and IRB permission). On the client's side I need to keep quite a bit of data that won't really change except in the case of pulling an updated version from the server, and then a minimal amount of user-specific data. Most of the data I will collect needs to be pushed to a server for analysis and then can be deleted from the client side. I am struggling to figure out what kind of data store I need to use, especially since I am not quite sure how the pushing and pulling from the server process works yet. Does it make sense to use Core Data? XML? SQLite? I like the Core Data idea, but I am not sure what kind of problems I will run into when I need to send large amounts of data to it and from it from the server. I imagine I might need to send data in a different form than it is probably stored in on either end - so what kind of overhead am I likely to run into in the process of converting that data? Is there a good format to save stuff in that would work well for me on both ends AND for sending the data? As you can probably tell, I could use some advice. Thanks!

  Read the article

• "Thread was being aborted" 0n large dataset

  - by Donaldinio

  I am trying to process 114,000 rows in a dataset (populated from an oracle database). I am hitting an error at around the 600 mark - "Thread was being aborted". All I am doing is reading the dataset, and I still hit the issue. Is this too much data for a dataset? It seems to load into the dataset ok though. I welcome any better ways to process this amount of data. rootTermsTable = entKw.GetRootKeywordsByCategory(catID); for (int k = 0; k < rootTermsTable.Rows.Count; k++) { string keywordID = rootTermsTable.Rows[k]["IK_DBKEY"].ToString(); ... } public DataTable GetKeywordsByCategory(string categoryID) { DbProviderFactory provider = DbProviderFactories.GetFactory(connectionProvider); DbConnection con = provider.CreateConnection(); con.ConnectionString = connectionString; DbCommand com = provider.CreateCommand(); com.Connection = con; com.CommandText = string.Format("Select * From icm_keyword WHERE (IK_IC_DBKEY = {0})",categoryID); com.CommandType = CommandType.Text; DataSet ds = new DataSet(); DbDataAdapter ad = provider.CreateDataAdapter(); ad.SelectCommand = com; con.Open(); ad.Fill(ds); con.Close(); DataTable dt = new DataTable(); dt = ds.Tables[0]; return dt; //return ds.Tables[0].DefaultView; }

  Read the article

• Compile C++ in Visual Studio

  - by Kasun

  Hi All.. I use this method to compile C++ file in VS. But even i provide the correct file it returns false. Can any one help me... This is class called CL class CL { private const string clexe = @"cl.exe"; private const string exe = "Test.exe", file = "test.cpp"; private string args; public CL(String[] args) { this.args = String.Join(" ", args); this.args += (args.Length > 0 ? " " : "") + "/Fe" + exe + " " + file; } public Boolean Compile(String content, ref string errors) { if (File.Exists(exe)) File.Delete(exe); if (File.Exists(file)) File.Delete(file); File.WriteAllText(file, content); Process proc = new Process(); proc.StartInfo.UseShellExecute = false; proc.StartInfo.RedirectStandardOutput = true; proc.StartInfo.RedirectStandardError = true; proc.StartInfo.FileName = clexe; proc.StartInfo.Arguments = this.args; proc.StartInfo.CreateNoWindow = true; proc.Start(); //errors += proc.StandardError.ReadToEnd(); errors += proc.StandardOutput.ReadToEnd(); proc.WaitForExit(); bool success = File.Exists(exe); return success; } } This is my button click event private void button1_Click(object sender, EventArgs e) { string content = "#include <stdio.h>\nmain(){\nprintf(\"Hello world\");\n}\n"; string errors = ""; CL k = new CL(new string[] { }); if (k.Compile(content, ref errors)) Console.WriteLine("Success!"); else MessageBox.Show("Errors are : ", errors); }

  Read the article

• looking for advise on importing excel into mysql with php

  - by Ole Media

  Alright, see if I can pick your brains from you all. I'm currently working on a project where all the information comes from different clients, the only thing in common is that the received data is done with excel. The excel spread sheet that they present is just a bunch of references and codes, and the problem than I'm facing is that I need the references and codes to be entered in certain format in order for the website to work. The perfect situation will be to go to each client and teach how I would need the data, but I can't do that because of the large number of clients, and more importantly I will be interrupting their work flow. Each client has its own codes and reference model and they are not willing to change their process The good news is that there is a standard pattern for the codes, but I'm talking close to 200 thousand codes with a bunch of combination. They way that we are currently solving the problem is that we have a person who checks each excel sheet received, runs a few macros, and manually fixes those codes in which the macro was not able to fix. The person that is doing this, is already burn out and frustrated and I would like to automatize this process with php. Suggestions?

  Read the article

• Get type of the parameter from list of objects, templates, C++

  - by CrocodileDundee

  This question follows to my previous question Get type of the parameter, templates, C++ There is the following data structure: Object1.h template <class T> class Object1 { private: T a1; T a2; public: T getA1() {return a1;} typedef T type; }; Object2.h template <class T> class Object2: public Object1 <T> { private: T b1; T b2; public: T getB1() {return b1;} } List.h template <typename Item> struct TList { typedef std::vector <Item> Type; }; template <typename Item> class List { private: typename TList <Item>::Type items; }; Is there any way how to get type T of an object from the list of objects (i.e. Object is not a direct parameter of the function but a template parameter)? template <class Object> void process (List <Object> *objects) { typename Object::type a1 = objects[0].getA1(); // g++ error: 'Object1<double>*' is not a class, struct, or union type } But his construction works (i.e. Object represents a parameter of the function) template <class Object> void process (Object *o1) { typename Object::type a1 = o1.getA1(); // OK }

  Read the article

• Information about PTE's (Page Table Entries) in Windows

  - by Patrick

  In order to find more easily buffer overflows I am changing our custom memory allocator so that it allocates a full 4KB page instead of only the wanted number of bytes. Then I change the page protection and size so that if the caller writes before or after its allocated piece of memory, the application immediately crashes. Problem is that although I have enough memory, the application never starts up completely because it runs out of memory. This has two causes: since every allocation needs 4 KB, we probably reach the 2 GB limit very soon. This problem could be solved if I would make a 64-bit executable (didn't try it yet). even when I only need a few hundreds of megabytes, the allocations fail at a certain moment. The second problem is the biggest one, and I think it's related to the maximum number of PTE's (page table entries, which store information on how Virtual Memory is mapped to physical memory, and whether pages should be read-only or not) you can have in a process. My questions (or a cry-for-tips): Where can I find information about the maximum number of PTE's in a process? Is this different (higher) for 64-bit systems/applications or not? Can the number of PTE's be configured in the application or in Windows? Thanks, Patrick PS. note for those who will try to argument that you shouldn't write your own memory manager: My application is rather specific so I really want full control over memory management (can't give any more details) Last week we had a memory overwrite which we couldn't find using the standard C++ allocator and the debugging functionality of the C/C++ run time (it only said "block corrupt" minutes after the actual corruption") We also tried standard Windows utilities (like GFLAGS, ...) but they slowed down the application by a factor of 100, and couldn't find the exact position of the overwrite either We also tried the "Full Page Heap" functionality of Application Verifier, but then the application doesn't start up either (probably also running out of PTE's)

  Read the article

• Activator.CreateInstance uses a huge amount of memory

  - by Marco

  I have been playing a bit with Silverlight and try to port my Silverlight 3.0 application to Silverlight 4.0. My application loads different XAP files and upon a user request create an instance of a Xaml user control and adds it to the main container, in a sort of MEF approach in order I can have an extensible and pluggable application. The application is pretty huge and to keep acceptable the performances and the initial loading I have built up some helper classes to load in the background all pages and user controls that might be used later on. On Silverlight 3.0 everything was running smoothly without any problem so far. Switching to SL 4.0 I have noticed that when the process approaches to create the instances of the user controls using Activator.CreateInstance, the layout freezes unexpectedly for a minute and sometimes for more. Looking at the task manager the memory usage of IE jumps from 50MB to 400MB and sometimes to 1.5 GB. If the process won't take that much the layout is rendered properly and the memory falls back to 50 MB. Otherwise everything crashes due to out of memory exeption. Does anybody encountered the same problem? Or has anybody a solution about this tricky issue?

  Read the article

• Recently used contacts getting corrupted Outlook 2010

  - by advis12

  We are using Microsoft's Identity Integration Feature Pack to sync contacts between two separate domains at two separate branches of our company. Recently we have run into an issue with a few of the contacts being pulled/synced from this remote location. When people in our organizaion are sending emails to certain contacts that are being synced from the remote location, the message delivery fails. After looking into the issue we are seeing that this failure is the result of the email being sent to some obscure email address rather than the correct email address. For example, the email address is getting changed to IMCEAEX_O=NT5_ou=44C5AE1BBEE0ED499F607407769311BB_cn=2F31FA0CA187314FA8D6A99BEFC52C36@domain.com rather than [email protected] Clearing the recently used contact list seems to solve the issue, but it does not solve the underlying problem. Because this issue is starting to happen to several different people I would like to solve the underlying cause. Does anyone have any input on how to start troubleshooting this issue? Also, we are using Exchange 2010. Thank you for taking the time to look at this.

  Read the article

• How change encoding ?

  - by simply denis

  I need convert or set encoding windows-1251 Process p = new Process(); StreamWriter sw; StreamReader sr; StreamReader err; ProcessStartInfo psI = new ProcessStartInfo("cmd"); psI.UseShellExecute = false; psI.RedirectStandardInput = true; psI.RedirectStandardOutput = true; psI.RedirectStandardError = true; psI.CreateNoWindow = true; p.StartInfo = psI; p.Start(); sw = p.StandardInput; sr = p.StandardOutput; err = p.StandardError; sw.AutoFlush = true; if (tbComm.Text != "") sw.WriteLine(tbComm.Text); else //execute default command sw.WriteLine("dir \\"); sw.Close(); textBox1.Text = sr.ReadToEnd();// this not support russian word. I need convert or set encoding windows-1251 textBox1.Text += err.ReadToEnd();

  Read the article

• Freeing of allocated memory in Solaris/Linux

  - by user355159

  Hi, I have written a small program and compiled it under Solaris/Linux platform to measure the performance of applying this code to my application. The program is written in such a way, initially using sbrk(0) system call, i have taken base address of the heap region. After that i have allocated an 1.5GB of memory using malloc system call, Then i used memcpy system call to copy 1.5GB of content to the allocated memory area. Then, I freed the allocated memory. After freeing, i used again sbrk(0) system call to view the heap size. This is where i little confused. In solaris, eventhough, i freed the memory allocated (of nearly 1.5GB) the heap size of the process is huge. But i run the same application in linux, after freeing, i found that the heap size of the process is equal to the size of the heap memory before allocation of 1.5GB. I know Solaris does not frees memory immediately, but i don't know how to tune the solaris kernel to immediately free the memory after free() system call. Also, please explain why the same problem does not comes under Linux? Can anyone help me out of this? Thanks, Santhosh.

  Read the article

• Recommendations for IPC between parent and child processes in .NET?

  - by Jeremy

  My .NET program needs to run an algorithm that makes heavy use of 3rd party libraries (32-bit), most of which are unmanaged code. I want to drive the CPU as hard as I can, so the code runs several threads in parallel to divide up the work. I find that running all these threads simultaneously results in temporary memory spikes, causing the process' virtual memory size to approach the 2 GB limit. This memory is released back pretty quickly, but occasionally if enough threads enter the wrong sections of code at once, the process crosses the "red line" and either the unmanaged code or the .NET code encounters an out of memory error. I can throttle back the number of threads but then my CPU usage is not as high as I would like. I am thinking of creating worker processes rather than worker threads to help avoid the out of memory errors, since doing so would give each thread of execution its own 2 GB of virtual address space (my box has lots of RAM). I am wondering what are the best/easiest methods to communicate the input and output between the processes in .NET? The file system is an obvious choice. I am used to shared memory, named pipes, and such from my UNIX background. Is there a Windows or .NET specific mechanism I should use?

  Read the article

• Software for Company internal Website [closed]

  - by LordT

  hope this is the right stackexchange site to ask this: We've a group of webpages/services at work (SE Startup), ranging from SVN, trac, continous integration to link collections to a DMS. Nearly everything has an RSS Feed to get the info I need, with the exception of SVN. I'm looking for some kind of software that can integrate these well on a kind of start-page. The most recent changes, upcoming events etc should be clearly visible, as well as an option to search (the search will be provided from a different tool). A news area should be included as well. Currently, I'm pondering doing this with either wordpress or TWiki, although wordpress seems to be the simpler solution in terms of getting something good looking quickly. Authentication should be handled by HTTP-Basic Auth, which we already have in place and working well. I normally would consider Sharepoint a viable option for this, but we're exclusively mac and linux, I won't put up a windows server just for this.

  Read the article

• Communicating with a running python daemon

  - by hanksims

  I wrote a small Python application that runs as a daemon. It utilizes threading and queues. I'm looking for general approaches to altering this application so that I can communicate with it while it's running. Mostly I'd like to be able to monitor its health. In a nutshell, I'd like to be able to do something like this: python application.py start # launches the daemon Later, I'd like to be able to come along and do something like: python application.py check_queue_size # return info from the daemonized process To be clear, I don't have any problem implementing the Django-inspired syntax. What I don't have any idea how to do is to send signals to the daemonized process (start), or how to write the daemon to handle and respond to such signals. Like I said above, I'm looking for general approaches. The only one I can see right now is telling the daemon constantly log everything that might be needed to a file, but I hope there's a less messy way to go about it. UPDATE: Wow, a lot of great answers. Thanks so much. I think I'll look at both Pyro and the web.py/Werkzeug approaches, since Twisted is a little more than I want to bite off at this point. The next conceptual challenge, I suppose, is how to go about talking to my worker threads without hanging them up. Thanks again.

  Read the article

• Overlay an image over video using OpenGL ES shaders

  - by BlueVoodoo

  I am trying to understand the basic concepts of OpenGL. A week into it, I am still far from there. Once I am in glsl, I know what to do but I find getting there is the tricky bit. I am currently able to pass in video pixels which I manipulate and present. I have then been trying to add still image as an overlay. This is where I get lost. My end goal is to end up in the same fragment shader with pixel data from both my video and my still image. I imagine this means I need two textures and pass on two pixel buffers. I am currently passing the video pixels like this: glGenTextures(1, &textures[0]); //target, texture glBindTexture(GL_TEXTURE_2D, textures[0]); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_LINEAR); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_CLAMP_TO_EDGE); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_CLAMP_TO_EDGE); glTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA, width, height, 0, GL_BGRA, GL_UNSIGNED_BYTE, buffer); Would I then repeat this process on textures[1] with the second buffer from the image? If so, do I then bind both GL_TEXTURE0 and GL_TEXTURE1? ...and would my shader look something like this? uniform sampler2D videoData; uniform sampler2D imageData; once I am in the shader? It seems no matter what combination I try, image and video always ends up being just video data in both these. Sorry for the many questions merged in here, just want to clear my many assumptions and move on. To clarify the question a bit, what do I need to do to add pixels from a still image in the process described? ("easy to understand" sample code or any types of hints would be appreciated).

  Read the article

• Is there a better way to keep track of session variable creation/access throughout different pages?

  - by Brandon

  Here's what I am working on. At my website I have multiple processes with each one containing multiple steps. Now in one of the processes, there is an error checking routine executed before proceeding to the next step of that process. A session var is set indicating the error status and it will either redirect back to the referrer or display the next page's contents. Now this kind of functionality, I believe, is common throughout web development. The issue that is occurring is that session vars are left around and are not being cleaned up properly. At times this introduces undesired behavior. My website is growing and I find that I am requiring more and more session vars to keep track of different system and error states. So I was thinking about creating a kind of "session variable keeper" to keep track of session var usage. The idea is fairly simple. It will have the notion of a context (e.g. registration process) and allow access to a predefined set of session vars within that context. In addition, the var and context will be paired with an action to proceed to some form of event handling. So if you haven't noticed I'm new to web development. Any thoughts or comments on the idea that I am proposing would be greatly appreciated. The back-end is written in PHP/MySQL.

  Read the article

• What is the easiest way to copy Chrome's login/passses into KeePass without creating duplicates?

  - by ldigas

  Okey, here's the thing. I have most of my login info in two places; one is in Keepass file and the other is in Chrome. Being a lazy sort of person, and since Chrome/Keepass integration never really started to work the way it should, a couple times a year I use the Nirsoft tool to get the Chrome login/passwords into a textual .csv file and then import it in Keepass. Creating lots of duplicates in the process which I then clean and so on. In the meantime, all the new logins I accumulate just stay in Chrome. As you might notice, this is not really the best way to do it. Is there a faster way to do this; copy logins from Chrome to Keepass without creating duplicates in Keepass, or has anyone perhaps found a way to get Keepass to work with Chrome under Win XP SP3? Keepass 1.0 or 2.0, doesn't make the difference as long as it works.

  Read the article

• Think this is a naming problem

  - by RussP

  Must be really dumb today - sorry in advance; anyhow have this unordered list <ul> <li><div class="openuserform" >Info</div> <div class="userform"></div></li> <li><div class="openuserform" >Appearence</div> <div class="userform"></div></li> <li><div class="openuserform" >Pages</div> <div class="userform"></div></li> <li><div class="openuserform" >Services</div> <div class="userform"></div></li> <li><div class="openuserform" >Community</div> <div class="userform"></div></li> </ul> which on click <div class="openuserform" > I want to load a separate form e.g. $('.openusersform').live('click',(function(){ $('.userform').load('form page.php'); }); OK I can get the forms to load in the right div using $(this).next('.userform').show(); $('.userform').load('form page.php'); but it's very ugly (I think) and I can only every get the first form to process propery. It is laid out like (ul,li etc.) this so I can have each loaded form aligned under the relevant li. But I think there has to be a better way as I do not seem to get any if(){} stemnents working to process the forms i.e. if(form1){ $.ajax etc } if (form2) {more ajax} Suggestions please - thanks

  Read the article

• How can I write to a single xml file from two programs at the same time?

  - by Tom Bushell

  We recently started working with XML files, after many years of experience with the old INI files. My coworker found some CodeProject sample code that uses System.Xml.XmlDocument.Save. We are getting exceptions when two programs try to write to the same file at the same time. System.IO.IOException: The process cannot access the file 'C:\Test.xml' because it is being used by another process. This seems obvious in hindsight, but we had not anticipated it because accessing INI files via the Win32 API does not have this limitation. I assume there's some arbitration done by the Win32 calls that work at a higher level than the the XmlDocument.Save method. I'm hoping there are higher level XML routines somewhere in the .Net library that work similarily to the Win32 functions, but don't know where to start looking. Or maybe we can set up our file access permissions to allow multiple programs to write to the same file? Time is short (like almost all SW projects), and if we can't find a solution quickly, we'll have to hold our noses and go back to INI files.

  Read the article

• Migrating Ajax web application to web socket

  - by Bastan

  Hi, I think i'm just missing a little detail that is preventing me from seeing the whole picture. I have a web application which use ajax request every x time to update client with new information or tasks. I also have a long running process on the server which is a java computation engine. I would like this engine to send update to the client. I am wondering how to migrate my web app to using websocket. Probably phpwebsocket or similar. Can my server 'decide' to send information to a specific client? It seems possible looking at the php-websocket. Can my java backend long process use the websocket server to send notification to a specific client. How? well I can say that my java app could use a class that could send over websocket instead of http. But how the websocket server knows to which client to send the 'info'. I am puzzle by all this. Any document that explain this in more details? It seems that the websocket could create an instance of my web application. Thanks

  Read the article

• Multiple PCs - Single profile

  - by martixy

  Or how to create an AD(or similar) environment at home? So... I work in this big IT company(they have and AD environment ofc) and I've seen first hand how nice integration and log-in-from-anywhere(roaming?) profiles can be. So I wanna create the same setup at home, where I have 3 machines. Mostly logging in with the same profile and preserving the settings(things like UAC being off, a few group policies I've customized, things like that). How can I achieve something like this?

  Read the article

• Do I lose the benefits of macro recording if I develop Excel apps in Visual Studio?

  - by DanM

  I've written lots of Excel macros in the past using the following development process: Record a macro. Open the VBA editor. Edit the macro. I'm now experimenting with a Visual Studio 2008 "Excel 2007 Add-In" project (C#), and I'm wondering if I will have to give up this development process. Questions: I know I can still record macros using Excel, but is there any way to access the resulting code in Visual Studio? Or do I just have to copy and paste then C#-ize it? What happens with my "Personal Macro Workbook"? Can I use the macros I have stored in there within C#? Or is there some way to convert them to C#? If there is some support for opening and editing VBA macros in Visual Studio, can you provide a very brief summary of how it works or point me to a good reference? Do you have any other tips for transitioning from writing macros in VBA using Excel's built-in editor to writing them in C# with Visual Studio?

  Read the article

• Read data from form

  - by Superhuman

  This is a strange question, I've never tried to do this before. I have a repetitive process requiring that I copy and paste data from text boxes in one program into another program for further processing. I'd like to automate this process using VB .NET. The application from which the data is gathered isn't mine, so I don't have ActiveX-like access to its controls. How would you write an application to gain access to a form from another application, to be able to find the controls on the form, and gather the values from them? Just experimenting, I've used the following code. This resulted in only the name of the form to which this code belongs. It didn't find the names of any other forms I have open, and I have a lot open to choose from. This is frustrating because it's only step one of what I'll need to do to make my life easier... Public Declare Function EnumWindows Lib "user32" (ByVal lpEnumFunc As CallBack, ByVal lParam As Integer) As Integer Public Delegate Function CallBack(ByVal hwnd As IntPtr, ByVal lParam As IntPtr) As Boolean Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click Dim cb As New CallBack(AddressOf MyCallBack) EnumWindows(cb, 8) End Sub Public Function MyCallBack(ByVal hwnd As Long, ByVal lparam As Long) As Boolean Dim frm As System.Windows.Forms.Control frm = System.Windows.Forms.Form.FromHandle(hwnd) If frm Is Nothing Then Return True If frm.Text <> "" Then TextBox1.Text += frm.Text & ", " End If Return True End Function Does anyone have a recommendation? Thanks, SH

  Read the article

• "Ghost" values in PHP/Smarty.

  - by Kyle Sevenoaks

  I've been working on a site for a while changing the layout and skin of a webshop checkout process. I've noticed that if you go all the way through the process until the last page, then click the link to go back to the view products page, the delivery method price displays underneath the navigation buttons, until you refresh and it goes away again. I've downloaded both sourced from the browser (Chrome, but this bug applies to all browsers) and used a file difference tool to display the differences, the result being only: < error.html vs > normal.html 34c34 < <link href="gzip.php?file=167842c1496093fbcd391b41cf7b03da.css&time=1272272181" rel="Stylesheet" type="text/css"/> --- > <link href="gzip.php?file=167842c1496093fbcd391b41cf7b03da.css&time=1272272348" rel="Stylesheet" type="text/css"/> Which is just the way it zips up the CSS stylesheets. (afaik) Has anyone ever encountered such a problem, or anything similar? Normal: Error: I can't even hazard a guess as to what is causing this, at all. I've searched over Google for anything and come up with nothing. What could be causing this? The site in question is Euroworker.no. HTML @ Pastebin. Smarty snippet: {if !$CANONICAL} {canonical}{self}{/canonical} {/if} <link rel="canonical" href="{$CANONICAL}" /> <!-- Css includes --> {includeCss file="frontend/Frontend.css"} {includeCss file="backend/stat.css"} {if {isRTL}} {includeCss file="frontend/FrontendRTL.css"} {/if} {compiledCss glue=true nameMethod=hash} <!--[if lt IE 8]> <link href="stylesheet/frontend/FrontendIE.css" rel="Stylesheet" type="text/css"/> {if $ieCss} <link href="{$ieCss}" rel="Stylesheet" type="text/css"/> {/if} <![endif]--> Thanks.

  Read the article

• Does IE completely ignore cache control headers for AJAX requests?

  - by Joshua Hayworth

  Hello there, I've got, what I would consider, a simple test web site. A single page with a single button. Here is a copy of the source I'm working with if you would like to download it and play with it. When that button is clicked, it creates a JavaScript timer that executes once a second. When the timer function is executed, An AJAX call is made to retrieve a text value. That text value is then placed into the DOM. What's my problem? IE Caching. Crack open Task Manager and watch what happens to the iexplorer.exe process (IE 8.0.7600.16385 for me) while the timer in that page is executing. See the memory and handle count getting larger? Why is that happening when, by all accounts, I have caching turned off. I've got the jQuery cache option set to false in $.ajaxSetup. I've got the CacheControl header set to no-cache and no-store. The Expires header is set to DateTime.Now.AddDays(-1). The headers are set in both the page code-behind as well as the HTTP Handler's response. Anybody got any ideas as to how I could prevent IE from caching the results of the AJAX call? Here is what the iexplorer.exe process looks like in ProcessMonitor. I believe that the activity shown in this picture is exactly what I'm attempting to prevent.

  Read the article

• localhost yes but phpmyadmin blank

  - by Giskin Leow

  WAMP people having problem with both localhost and phpmyadmin loads blank which usually the port problem. Mine is only phpmyadmin blank. sqlbuddy and phpinfo no problem. tried uninstall reinstalled wamp. tried xampp, same problem, all works well, not phpmyadmin. mysql log: 120905 8:03:08 [Note] Plugin 'FEDERATED' is disabled. 120905 8:03:08 InnoDB: The InnoDB memory heap is disabled 120905 8:03:08 InnoDB: Mutexes and rw_locks use Windows interlocked functions 120905 8:03:08 InnoDB: Compressed tables use zlib 1.2.3 120905 8:03:09 InnoDB: Initializing buffer pool, size = 128.0M 120905 8:03:09 InnoDB: Completed initialization of buffer pool 120905 8:03:09 InnoDB: highest supported file format is Barracuda. 120905 8:03:09 InnoDB: Waiting for the background threads to start 120905 8:03:10 InnoDB: 1.1.8 started; log sequence number 1595675 120905 8:03:11 [Note] Server hostname (bind-address): '(null)'; port: 3306 120905 8:03:11 [Note] - '(null)' resolves to '::'; 120905 8:03:11 [Note] - '(null)' resolves to '0.0.0.0'; 120905 8:03:11 [Note] Server socket created on IP: '0.0.0.0'. 120905 8:03:13 [Note] Event Scheduler: Loaded 0 events 120905 8:03:13 [Note] wampmysqld: ready for connections. apache log [Wed Sep 05 08:03:09 2012] [notice] Apache/2.2.22 (Win32) PHP/5.4.3 configured -- resuming normal operations [Wed Sep 05 08:03:09 2012] [notice] Server built: May 13 2012 13:32:42 [Wed Sep 05 08:03:09 2012] [notice] Parent: Created child process 3812 [Wed Sep 05 08:03:09 2012] [notice] Child 3812: Child process is running [Wed Sep 05 08:03:09 2012] [notice] Child 3812: Acquired the start mutex. [Wed Sep 05 08:03:09 2012] [notice] Child 3812: Starting 64 worker threads. [Wed Sep 05 08:03:09 2012] [notice] Child 3812: Starting thread to listen on port 80. [Wed Sep 05 08:03:09 2012] [notice] Child 3812: Starting thread to listen on port 80. [Wed Sep 05 08:04:14 2012] [error] [client 127.0.0.1] File does not exist: C:/wamp/www/favicon.ico [Wed Sep 05 08:09:50 2012] [error] [client 127.0.0.1] File does not exist: C:/wamp/www/favicon.ico [Wed Sep 05 08:41:03 2012] [error] [client 127.0.0.1] File does not exist: C:/wamp/www/phpMyAdmin

  Read the article

< Previous Page | 394 395 396 397 398 399 400 401 402 403 404 405  | Next Page >