Search Results

Search found 21331 results on 854 pages for 'require once'.

Page 400/854 | < Previous Page | 396 397 398 399 400 401 402 403 404 405 406 407  | Next Page >

  • Glitch with updated nvidia drivers for Dual Monitor

    - by Shinhan
    Same problem already happened once so I rolled back to the latest non-problematic version, but it's been months now and I thought to try gain. Still the same problem, so now I thought to ask for help rather than rollback to this, now very old, version. Currently I use 266.58 version drivers for Windows 7 x64 and GeForce GTX 275. (Downloaded from the nvidia website) I have two monitors, Samsung SyncMaster 223BW (LCD) is primary and LG F900B (CRT, old but still works) is secondary. The problem: when I turn off the monitors (both or just secondary) all of the windows that were on the secondary monitor get moved to the primary. This also occurs when I use Sleep. Again, in the old drivers this didnt happen, but now it does and is very annoying, requiring me to manually move the windows back to the secondary monitor (which I use for most of the windows). I had no luck searching for this on google, but maybe somebody here will have a useful suggestion.

    Read the article

  • Shut Down took way too long because of "Background Programs"

    - by Christopher Chipps
    I tried shutting my desktop PC (with Windows7) down but after several attempts (like 4 or 5) at Start -- Shut Down, the GUI was still there and it was not shutting down. I didn't think there were any programs running when I pressed Shut Down, so I went into the taskbar (Ctrl + Alt + Del) to check out the processes. Once I did that, a screen appeared with a message stating that there are "background programs" still running and it gave me an option to "Force Shut Down" which I pressed and it shut down normally. Does anyone know why this would happen?

    Read the article

  • Entourage Reminders for events not on calendar

    - by Jon Lasser
    After a series of nasty mishaps, I needed to create a new Entourage profile and re-populate my calendar by resynching it with my Exchange Server. Now I'm receiving multiple notifications for a single appointment -- two or even four at once. (Perhaps four is due to the intermediate 'reset' attempts I made before discarding and creating a new profile.) Reviewing my calendar I see only a single appointment, not multiple appointments. Checking my Outlook calendar confirms only a single appointment. My local calendar is completely empty. Is there a separate Entourage database for reminders that I can clear or resync? Is there somewhere else for calendar appointments to live where I'm not looking?

    Read the article

  • Folder Permissions Apache

    - by user1671777
    I have a site that will need to store file uploads by the user once logged in. Currently I have a folder with permissions opened up, (777), because that was the only way I could get mkdir() to work. When the user uploads a file, the application creates several directories based on the user, in this directory then eventually stores the file. Couple of questions: How do I setup the permissions on each of these folders and sub folders so that only logged in users to my site have access to them? Is this even possible? Is there a more secure way of storing .pdf, word docs, and text files?

    Read the article

  • Remove auto-complete field entries in Google Chrome

    - by NT.
    Is there a way to stop the gmail address field (on the login page) from displaying all the gmail addresses that you have ever typed in it? When logging in with Google Chrome or trying to set up a new account, anything you type which starts with the same letter as the one that you are trying to use currently will show up in the auto-complete field, I don't want that. I understand that this is a convenient feature in some cases, but the thing is--I know this shouldn't've happened, but it has actually happened more than once--I sometimes mistyped my password in the Gmail address field right after the address, mistakingly assuming that the prompt had already been moved to the password field, and then hit "Enter" without looking first. The next time I tried to enter my Gmail address, it popped up the address followed by my password as one of the entries on the list of email addresses that shows up, and I couldn't get rid of the entry. Is there a way to remove these?

    Read the article

  • Why does my mac have page outs when I have inactive memory?

    - by Chace Fields
    From what I've read, page outs are a sign that you don't have enough RAM. I have also read that if you have inactive memory available, then the machine will use that memory when starting up new programs. I have about 2GB of inactive memory and very little available memory. Once this happens, my page outs go up. Why is this and do I need more memory? I have 8GB of RAM. I'm running VMware Fusion 5 with 2GB allotted to Windows 8.

    Read the article

  • PSU requirement question for my PC setup.

    - by user69474
    I understand that sometimes there may be a situation where the PSU is way more than required but in this case of mine, I'm not too sure. Sometimes when I play games, my computer will crash and restarts itself, 10 mins into the game. Once I received a message that says something like the power is overheating or something like that. Ok, so I have a 500W PSU. I have: 1x Internal DVD writer 1x SATA 250GB HD 1x Nvidia 8500 GT 2GB RAM. As I'm planning to get an additional 250GB SATA HD, I wonder if I need to increase my PSU as well -- in full knowledge of the previous crashes experienced before. Should I upgrade my PSU to 650W perhaps, or is that excessive?

    Read the article

  • Oracle WebCenter: Extending Oracle Applications & Oracle Fusion Applications

    - by kellsey.ruppel(at)oracle.com
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif";} -- Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif";}We’ve talked in previous weeks about the key goals of the new release of WebCenter are providing a Modern User Experience, unparalleled Application Integration, converging all the best of the existing portal platforms into WebCenter and delivering a Common User Experience Architecture.  We’ve provided an overview of Oracle WebCenter and discussed some of the other key goals in previous weeks, and this week, we’ll focus on how the new release of Oracle WebCenter extends Oracle Applications and Fusion Applications.When we talk about the new release of Oracle WebCenter, we really emphasize to customers that they can leverage their existing investments and benefit from WebCenter’s Complete, Open and Integrated platform. To summarize what we mean here, Oracle WebCenter is:COMPLETEComprehensive platform for Portals/Websites, Composite Applications with integrated Social/Collaboration services and Content Management infrastructureOPENStandards support improves reuse of existing resources and extends the value of existing systemsINTEGRATEDImplicit integration with Oracle Applications, Oracle Fusion Applications & other enterprise applicationsWith all the existing enterprise applications in Oracle’s application portfolio, in the new release of WebCenter we’ve got a set of pre-built catalogs that customers can use directly to get at all the portlet resources certified and available from Oracle.  It provides customers with a ready-to-use view of their application resources.  And since WebCenter provides seamless support for building these portlets/components in a professional IDE like JDeveloper or from within a Browser, developers and business analysts can quickly assemble the information they require for their existing application investment.  In addition, we’ve taken all the user flows and patterns that we’ve learned in building Fusion Applications and focused on making it dramatically easier to use tools to create reusable application UI components. In this way, one team in the organization using an application can share their components with other teams.  And more importantly, the new team can make changes to the component without breaking the original component.  When tied to enterprise applications, this capability is extremely powerful.  This is what Oracle means when they talk about Enterprise Mashups.  And finally, we’ve provided an innovative way to go well beyond traditional “on the glass” integration by enabling business transactions for the existing applications direct integration using activity streams. This delivers aggregated and “on time” delivery of information to the business users based on what‘s happening in the enterprise that is relevant to their particular job function.  Most importantly, it ties into the personalization interactions discussed earlier so that it can help target information to you directly based on past interactions.  Application integration is key to making businesses function more efficiently with these new Enterprise 2.0 technologies.Keep checking back this week as we share more information on how WebCenter is the most complete, open and integrated modern user experience platform and show key ways WebCenter can extend Oracle Applications & Oracle Fusion Applications.

    Read the article

  • What FTP clients securely handle FTP/TLS where the server has a self-signed cert?

    - by billpg
    I'm trying to connect to an FTP server that uses TLS on port 990. Unfortunately, the server uses a self-signed cert. What FTP clients for Windows handle this type of connection securely, such that I can securely verify the cert before continuing with the connection and logging in? (The server admin has supplied me with the expected certificate thumbprint to look for.) As an example of doing it wrongly, Core FTP LE 2.2 presents a dialog with basic information about the cert presented, inviting me to accept-once, accept-always or cancel. The dialog does not include the cert's hash/thumbprint and without that thumprint, I can't verify if the cert I'm being presented is the right one.

    Read the article

  • Global hotkeys: songbird on KDE

    - by alpha1
    I'm running songbird on opensuse 11.2 KDE 4.3.1 on my EEE pc. On windows, there is a hotkey thing inside Songbird, so i set META F9,10,11,12 as media keys and it work just fine. On linux, there is not hotkey thing in songbird, and I would like to set those same hotkeys. I've played around with the Amarok Hotkeys, which are now setup that way, and looked in all the KDE shortcuts, but cannot find a way to add a new program and new hot keys. I know its possible, I did it before once, but the KDE shortcut programs have changed and I no longer see the stuff i used to do it before. I'd like to do the same to banshee at some point, but Songbird is the important program. Any Ideas? Any way to set those keys to generic media buttons?

    Read the article

  • Apache2's recursive directory permission requirement

    - by Sn3akyP3t3
    The experience I've had thus far is from Ubuntu 10.04 and 12.04 64 bit OS so if there are other OS differences I'd like to know if this is an OS specific problem or not. The issue I've experienced is mostly confusion. Once the cause of the problem is identified and corrected there are no further related problems experienced. The symptom is Error 403 forbidden. Typically the cause is attempting to use a directory other than /var/www/ for content. The cause is simply permissions, but its puzzling why the required permissions must persist from at least one level deeper than root onward till the current working directory where the content is stored. For example: Alias /example/ "/home/user/permissions/can/be/confusing/with/apache/" <Directory /home/user/permissions/can/be/confusing/with/apache/> Options FollowSymLinks MultiViews AllowOverride None Order allow,deny Allow from all </Directory> With www-data being the user that spawned apache and "user" being a member of the www-data group. Thus, if ownership of /home/user/* is user:user then all that is necessary to display content with apache is permssions of read and execute. So d---r-x--- should suffice, but for practical purposes I'm using drwxr-x--- for most. However, if all directories /home/user/* are permissions of drwxr-x-- and /home/user/ itself has permissions of drwx------ then content will always fail with error 403. This is strange because it doesn't follow what I would consider traditional logic of permissions which should only be applicable to the current working directory or a particular file in that directory and not any directory further back in the chain. Is this by design or is it a bug?

    Read the article

  • SSIS DSN Not Showing as ODBC Data Source

    - by user1114330
    I have been following the directions here: http://social.msdn.microsoft.com/Forums/en-US/sqlintegrationservices/thread/05ccd778-b78c-4a83-a10a-c4ae412cc6e4 And ran into a problem where my System DSN is not showing up as a ODBC provider. I found this which seemed promising: http://support.microsoft.com/kb/2000277 I was not able to delete the key but followed but I did what was suggested: "If unable to delete the key, double-click the key and erase the Data value entered. Once done, the value should read ' (value not set) '" However, after following the instructions my System DSN still does not appear as an option. The USER DSN however does show...has shown but does not work as I get a permissions error. Any ideas?

    Read the article

  • Speaking at Dog Food Conference 2013

    - by Brian T. Jackett
    Originally posted on: http://geekswithblogs.net/bjackett/archive/2013/10/22/speaking-at-dog-food-conference-2013.aspx    It has been a couple years since I last attended / spoke at Dog Food Conference, but on Nov 21-22, 2013 I’ll be speaking at Dog Food Conference 2013 here in Columbus, OH.  For those of you confused by the name of the conference (no it’s not about dog food), read up on the concept of dogfooding .  This conference has a history of great sessions from local and regional speakers and I look forward to being a part of it once again.  Registration is now open (registration link) and is expected to sell out quickly.  Reserve your spot today.   Title: The Evolution of Social in SharePoint Audience and Level: IT Pro / Architect, Intermediate Abstract: Activities, newsfeed, community sites, following... these are just some of the big changes introduced to the social experience in SharePoint 2013. This class will discuss the evolution of the social components since SharePoint 2010, the architecture (distributed cache, microfeed, etc.) that supports the social experience, Yammer integration, and proper planning considerations when deploying social capabilities (personal sites, SkyDrive Pro and distributed cache). This session will include demos of the social newsfeed, community sites, and mentions. Attendees should have an intermediate knowledge of SharePoint 2010 or 2013 administration.         -Frog Out

    Read the article

  • Calculating Screen Resolutions Using WPF

    - by Jeff Ferguson
    WPF measures all elements in device independent pixels (DIPs). These DIPs equate to device pixels if the current display monitor is set to the default of 96 DPI. However, for monitors set to a DPI setting that is different than 96 DPI, then WPF DIPs will not correspond directly to monitor pixels. Consider, for example, the WPF properties SystemParameters.PrimaryScreenHeight and SystemParameters.PrimaryScreenWidth. If your monitor resolution is set to 1024 pixels wide by 768 pixels high, and your monitor is set to 96 DPI, then WPF will report the value of SystemParameters.PrimaryScreenHeight as 768 and the value of SystemParameters.PrimaryScreenWidth as 1024. No problem. This aligns nicely because the WPF device independent pixel value (96) matches your monitor's DPI setting (96). However, if your monitor is not set to display pixels at 96 DPI, then SystemParameters.PrimaryScreenHeight and SystemParameters.PrimaryScreenWidth will not return what you expect. The values returned by these properties may be greater than or less than what you expect, depending on whether or not your monitor's DPI value is less than or greater than 96. Since the SystemParameters.PrimaryScreenHeight and SystemParameters.PrimaryScreenWidth properties are WPF properties, their values are measured in WPF DIPs, rather than taking monitor DPI into effect. Once again: WPF measures all elements in device independent pixels (DIPs). To combat this issue, you must take your monitor's DPI settings into effect if you're looking for the monitor's width and height using the monitor's DPI settings. The handy code block below will help you calculate these values regardless of the DPI setting on your monitor: Window MainWindow = Application.Current.MainWindow; PresentationSource MainWindowPresentationSource = PresentationSource.FromVisual(MainWindow); Matrix m = MainWindowPresentationSource.CompositionTarget.TransformToDevice; DpiWidthFactor = m.M11; DpiHeightFactor = m.M22; double ScreenHeight = SystemParameters.PrimaryScreenHeight * DpiHeightFactor; double ScreenWidth = SystemParameters.PrimaryScreenWidth * DpiWidthFactor; The values of ScreenHeight and ScreenWidth should, after this code is executed, match the resolution that you see in the display's Properties window.

    Read the article

  • Caching of path environment variable on windows?

    - by jwir3
    I'm assisting one of our testers in troubleshooting a configuration problem on a Windows XP SP3 system. Our application uses an environment variable, called APP_HOME, to refer to the directory where our application is installed. When the application is installed, we utilize the following environment variables: APP_HOME = C:\application\ PATH = %PATH%;%APP_HOME%bin Now, the problem comes in that she's working with multiple versions of the same application. So, in order to switch between version 7.0 and 8.1, for example, she might use: APP_HOME = C:\application_7.0\ (for 7.0) and then change it to: APP_HOME = C:\application_8.1\ (for 8.1) The problem is that once this change is made, the PATH environment variable apparently still is looking at the old expansion of the APP_HOME variable. So, for example, after she has changed APP_HOME, PATH still refers to the 7.0 bin directory. Any thoughts on why this might be happening? It looks to me like the PATH variable is caching the expansion of the APP_HOME environment variable. Is there any way to turn this behavior off?

    Read the article

  • How to Access the Control Panel in Windows 8

    - by Matthew Klein
    With the old Windows Start menu, you could add the Control Panel as a menu or a drop-down list. With Windows 8, you can pin the Control Panel to the Start Screen and taskbar but first you need to know where it is. One of the chief complaints about Windows 8 (or any new version of Microsoft’s operating system) is “where did such-and-such go?” With Windows 8, when MS removed the Start button and Start Menu, it threw a lot of people for a loop. Because the Start Menu was like an old familiar hang out; one of those places that no matter how it changed over the years, it was a fairly reliable place to find stuff whether it was your Documents folder, Devices, Printers, the ability to search your programs and files, and of course, the Control Panel. There are about four ways (so far) to access the Control Panel in Windows 8 Preview Release. HTG Explains: What Is RSS and How Can I Benefit From Using It? HTG Explains: Why You Only Have to Wipe a Disk Once to Erase It HTG Explains: Learn How Websites Are Tracking You Online

    Read the article

  • Restarting Hudson - Windows Installation

    - by Toggo
    Whenever I update/install a new plugin or update hudson. Once the new plugin/update has been installed a button appears "Restart when no jobs are running." If I click this button hudson appears to try to restart but then just hangs. Has anyone else experienced this? Can hudson be forced to restart another way? I've tried restarting the service but this has no effect. I've asked this question over at stack overflow, so will update this if I get an answer from there. Thanks Tom

    Read the article

  • MySQL Database Replication and Server Load

    - by Willy
    Hi Everyone, I have an online service with around 5000 MySQL databases. Now, I am interested in building a development area of the exactly same environment in my office, therefore, I am about to setup MySQL replication between my live MySQL server and development MySQL server. But my concern is the load which will occur on my live MySQL server once replication is started. Do you have any experience? Will this process cause extra load on my production server? Thanks, have a nice weekend.

    Read the article

  • Windows 8 - can't drag files from Explorer and drop on applications

    - by FerretallicA
    In Windows 8 I find I can't drag files to applications like I've been able to do for as long as I can remember. Example: Drag MP3s to Winamp Drag folder full of music to Winamp Drag videos to VLC Drag txt, reg etc files to Notepad I have tried various combinations of: Running Explorer as administrator Running drop target as administrator Taking ownership of drop target application's folder Taking ownership of Explorer Changing user account to administrator Create a new user account Lowering UAC level Disabling UAC in GUI Disabling UAC in registry Running Explorer folders in a separate thread This is the last straw if there's no known proper (ie non hacky compromise) fix for this. "Little" things like this combined are a productivity nightmare and if I have to relearn so much and configure so much to get basic things done with an OS I might as well just move to Linux once and for all.

    Read the article

  • Black screen after grub kernal selection menu

    - by skip
    I have an Acer eMachines e727 with Intel GMA 4500M integrated graphics (drivers updated to latest). I installed Ubuntu 12.04 using Wubi. All is well until I select the kernal (first one on the list). My display goes black. I searched for solutions and found one on Unbuntu forum which partially helped. Following that sticky post, I pressed "e" at the kernal listings. I changed the $Linux... default line to "quiet splash nomodeset" and was able to get to the login screen and desktop. I edited grub to make the nomodeset permanent (also removed the vt command as recommended). I followed through with changing grub to match the graphics as recommended in the article using the grub cli (using info from vbeinfo). I updated grub with the recommended settings but still get the black screen after selecting the kernal. Only nomodeset works to get me to the login and desktop. Once I get to the desktop, my display resolution shows being set to 1024x768 but it actually looks like 800x680. What do I need to do to get past these issues? Thanks!

    Read the article

  • Dell Latitude will not boot after fresh Ubuntu 12.10 installation. Black screen

    - by James
    I have an old dell latitude d610 that I've just installed ubuntu 12.10 onto, and now unfortunately it will not complete booting up. The screen flashes purple but then fades out and dies. I'm fairly sure there is an issue with graphics drivers, as I had to turn on "nomodeset" in the options when installing off a DVD to see the installer, but I'm very new to linux and don't know terribly much at all apart from what I've read on the net. I have been able to hold down shift and bring up GRUB, and entered into recovery mode, and when I enter into the low graphics mode, the xserver log file says it can detect a screen but found none with a useable configuration, then goes on to say a fatal server error has occurred and no screen have been found at all, telling me to check a log file at "/var/log/xorg.0.log" I have no idea how to check this specific log file! Attempting to actually go further than this in low graphics mode and restart the display simply artefacts the screen. It is all very strange and annoying because I did once by random have the machine boot completely for no apparent reason, but upon restarting the issue reoccurred.

    Read the article

  • How can I install CentOS without a keyboard, mouse, or monitor?

    - by user1032531
    I will be buying a new computer which will be used as a CentOS server. I will put it on my home LAN, and once it is set up, will access it only through SSH. I don't want to spend a lot of money (maybe $500), and I don't want to buy another monitor or keyboard just to through them away after the server is setup. My question is how do I access the computer without a keyboard and monitor when I install the operating system? For media, I can use either the DVD or an ISO on the USB, so am good there. But how do I see what I am doing and enter commands without a monitor or keyboard? I have a Window 7 laptop, an XP laptop, and a CentOS laptop. Can I use one of my laptops to act as the MMI (Man Machine Interface)? If not, what is the easiest and least expensive option? Thank you

    Read the article

  • Next Generation Mobile Clients for Oracle Applications & the role of Oracle Fusion Middleware

    - by Manish Palaparthy
    Oracle Enterprise Applications have been available with modern web browser based interfaces for a while now. The web browsers available in smart phones no longer require special markup language such as WML since the processing power of these handsets is quite near to that of a typical personal computer. Modern Mobile devices such as the IPhone, Android Phones, BlackBerry, Windows 8 devices can now render XHTML & HTML quite well. This means you could potentially use your mobile browser to access your favorite enterprise application. While the Mobile browser would render the UI, you might find it difficult to use it due to the formatting & Presentation of the Native UI. Smart phones offer a lot more than just a powerful web browser, they offer capabilities such as Maps, GPS, Multi touch, pinch zoom, accelerometers, vivid colors, camera with video, support for 3G, 4G networks, cloud storage, NFC, streaming media, tethering, voice based features, multi tasking, messaging, social networking web browsers with support for HTML 5 and many more features.  While the full potential of Enterprise Mobile Apps is yet to be realized, Oracle has published a few of its applications that take advantage of the above capabilities and are available for the IPhone natively. Here are some of them Iphone Apps  Oracle Business Approvals for Managers: Offers a highly intuitive user interface built as a native mobile application to conveniently access pending actions related to expenses, purchase requisitions, HR vacancies and job offers. You can even view BI reports related to the worklist actions. Works with Oracle E-Business Suite Oracle Business Indicators : Real-time secure access to OBI reports. Oracle Business Approvals for Sales Managers: Enables sales executives to review key targeted tasks, access relevant business intelligence reports. Works with Siebel CRM, Siebel Quote & Order Capture. Oracle Mobile Sales Assistant: CRM application that provides real-time, secure access to the information your sales organization needs, complete frequent tasks, collaborate with colleagues and customers. Works with Oracle CRMOracle Mobile Sales Forecast: Designed specifically for the mobile business user to view key opportunities. Works with Oracle CRM on demand Oracle iReceipts : Part of Oracle PeopleSoft Expenses, which allows users to create and submit expense lines for cash transactions in real-time. Works with Oracle PeopleSoft expenses Now, we have seen some mobile Apps that Oracle has published, I am sure you are intrigued as to how develop your own clients for the use-cases that you deem most fit. For that Oracle has ADF Mobile ADF Mobile You could develop Mobile Applications with the SDK available with the smart phone platforms!, but you'd really have to be a mobile ninja developer to develop apps with the rich user experience like the ones above. The challenges really multiply when you have to support multiple mobile devices. ADF Mobile framework is really handy to meet this challenge ADF Mobile can in be used to Develop Apps for the Mobile browser : An application built with ADF Mobile framework installs on a smart device, renders user interface via HTML5, and has access to device services. This means the programming model is primarily web-based, which offers consistency with other enterprise applications as well as easier migration to new platforms. Develop Apps for the Mobile Client (Native Apps): These applications have access to device services, enabling a richer experience for users than a browser alone can offer. ADF mobile enables rapid and declarative development of rich, on-device mobile applications. Developers only need to write an application once and then they can deploy the same application across multiple leading smart phone platforms. Oracle SOA Suite Although the Mobile users are using the smart phone apps, and actual transactions are being executed in the underlying app, there is lot of technical wizardry that is going under the surface. All of this key technical components to make 1. WebService calls 2. Authentication 3. Intercepting Webservice calls and adding security credentials to the request 4. Invoking the services of the enterprise application 5. Integrating with the Enterprise Application via the Adapter is all being implemented at the SOA infrastructure layer.  As you can see from the above diagram. The key pre-requisites to mobile enable an Enterprise application are The core enterprise application Oracle SOA Suite ADF Mobile

    Read the article

  • How to rename files in a folder using the ls command output as a pipe ?

    - by user1179459
    I am using GNU/Linux and BASH shell, What i wanted to do is in server is to i need to be able to download the files stating with B* and D* and then rename them to ~B* and ~D*(same file name just ~ in-front) i wrote following which works fine for the downloading part ideally i would like it to use ls command output as well but dont know how to do that. cd inbox get D* get B* ls B*|rename $0 ~B.* bye Any idea ? ideally what i would like to do is ls command to send the list of files one by one to the get command and then the once the get command is completed i want rename command executed renaming the server files

    Read the article

  • Security Essentials not installing and I suspect my machine is infected with malware

    - by Jim
    My mouse seems to be automatically right-clicking every few seconds, and sometimes constantly. My cursor will abruptly become an hourglass for a moment every once in a while, as well. It happens in spurts, as in it hasn't happened for about 10 minutes, but the preceding 20 before that it was happening constantly. I suspect that my machine is infected with malware of some sort, so I've tried installing Microsoft Security Essentials, but it presents the following error upon installation failure: My questions are: How can I solve the MSE installation issue and run a scan? Are there any indications that malware isn't actually my issue? Is MSE my best way to go about solving my issue, assuming that malware actually is the problem? Many thanks!

    Read the article

< Previous Page | 396 397 398 399 400 401 402 403 404 405 406 407  | Next Page >