Search Results

Search found 19408 results on 777 pages for 'output formats'.

Page 401/777 | < Previous Page | 397 398 399 400 401 402 403 404 405 406 407 408  | Next Page >

• Read only file system

  - by Jack Moon

  I'm running Ubuntu 12.10, Upon opening any shell I get the following error: /home/jack/.rbenv/libexec/rbenv-init: line 87: cannot create temp file for here-document: Read-only file system I realised this wasn't simply a rbenv issue, as any file I try to write to returns an error saying the system is Read-only. I don't know how else to describe my problem, each time I boot up the system goes through a disk check, where it supposedly fixes several errors in my disk. Here is my /etc/fstab # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda1 during installation UUID=1cc4b2ab-a984-4516-ac25-6d64f5050244 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=4e0dfeae-701a-43ce-b5c6-65f15ab3d8e3 none swap sw 0 0 The entire file system is read-only. I've tried the following sudo fsck.ext4 -f /dev/sda1 which gave the following (shortened) output /dev/sda1: ***** FILE SYSTEM WAS MODIFIED ***** /dev/sda1: ***** REBOOT LINUX ***** /dev/sda1: 1257080/45268992 files (1.0% non-contiguous), 50696803/181051904 blocks

  Read the article

• Accessing Server-Side Data from Client Script: Accessing JSON Data From an ASP.NET Page Using jQuery

  When building a web application, we must decide how and when the browser will communicate with the web server. The ASP.NET WebForms model greatly simplifies web development by providing a straightforward mechanism for exchanging data between the browser and the server. With WebForms, each ASP.NET page's rendered output includes a <form> element that performs a postback to the same page whenever a Button control within the form is clicked, or whenever the user modifies a control whose AutoPostBack property is set to True. On postback, the server sends the entire contents of the web page back to the browser, which then displays this new content. With WebForms we don't need to spend much time or effort thinking about how or when the browser will communicate with the server or how that returned information will be processed by the browser. It just works. While this approach certainly works and has its advantages, it's not without its drawbacks. The primary concern with postback forms is that they require a large amount of information to be exchanged between the browser and the server. Specifically, the browser sends back all of its form fields (including hidden ones, like view state, which may be quite large) and then the server sends back the entire contents of the web page. Granted, there are scenarios where this large quantity of data needs to be exchanged, but in many cases we can use techniques that exchange much less information. However, these techniques necessitate spending more time and effort thinking about how and when to have the browser communicate with the server and intelligently deciding on what information needs to be exchanged. This article, the first in a multi-part series, examines different techniques for accessing server-side data from a browser using client-side script. Throughout this series we will explore alternative ways to expose data on the server so that it can be accessed from the browser using script; we will also examine various tools for communicating with the server from JavaScript, including jQuery and the ASP.NET AJAX library. Read on to learn more! Read More >

  Read the article

• AS3: StageWidth for BOX2D?

  - by Gabriel Meono

  I know BOX2D uses meters, and AS3 uses pixels. I'm trying to create objects which are limited to the stageWidth. If I do this variable: for (var i:int = 0; i<(stage.stageWidth); i++){...} The animation will freeze, and this output appears: TypeError: Error #1009: Cannot access a property or method of a null object reference. at Box2D.Collision::b2BroadPhase/CreateProxy() at Box2D.Collision.Shapes::b2Shape/CreateProxy() at Box2D.Dynamics::b2Body/CreateShape() at com.actionsnippet.qbox.objects::CircleObject/build() at com.actionsnippet.qbox::QuickObject/init() at com.actionsnippet.qbox::QuickObject() at com.actionsnippet.qbox.objects::CircleObject() at com.actionsnippet.qbox::QuickBox2D/create() at com.actionsnippet.qbox::QuickBox2D/addCircle() at BOX2D_Test_Tutorial_fla::MainTimeline/frame1() Does anyone know how to fix this? Full Code: [SWF(width = 350, height = 600, frameRate = 60)] import com.actionsnippet.qbox.*; var sim:QuickBox2D = new QuickBox2D(this); sim.createStageWalls(); // make a heavy circle sim.addCircle({x:3, y:3, radius:0.4, density:1}); // create a few platforms // make pins for (var i:int = 0; i<(stage.stageWidth); i++){ //End sim.addCircle({x:1 + i * 1.5, y:18, radius:0.1, density:0}); sim.addCircle({x:2 + i * 1.5, y:17, radius:0.1, density:0}); sim.addCircle({x:1 + i * 1.5, y:16, radius:0.1, density:0}); sim.addCircle({x:2 + i * 1.5, y:15, radius:0.1, density:0}); //Mid end sim.addCircle({x:0 + i * 2, y:14, radius:0.1, density:0}); sim.addCircle({x:0 + i * 2, y:13, radius:0.1, density:0}); sim.addCircle({x:0 + i * 2, y:12, radius:0.1, density:0}); sim.addCircle({x:0 + i * 2, y:11, radius:0.1, density:0}); sim.addCircle({x:0 + i * 2, y:10, radius:0.1, density:0}); } sim.start(); sim.mouseDrag();

  Read the article

• My New BDD Style

  - by Liam McLennan

  I have made a change to my code-based BDD style. I start with a scenario such as: Pre-Editing * Given I am a book editor * And some chapters are locked and some are not * When I view the list of chapters for editing * Then I should see some chapters are editable and are not locked * And I should see some chapters are not editable and are locked and I implement it using a modified SpecUnit base class as: [Concern("Chapter Editing")] public class when_pre_editing_a_chapter : BaseSpec { private User i; // other context variables protected override void Given() { i_am_a_book_editor(); some_chapters_are_locked_and_some_are_not(); } protected override void Do() { i_view_the_list_of_chapters_for_editing(); } private void i_am_a_book_editor() { i = new UserBuilder().WithUsername("me").WithRole(UserRole.BookEditor).Build(); } private void some_chapters_are_locked_and_some_are_not() { } private void i_view_the_list_of_chapters_for_editing() { } [Observation] public void should_see_some_chapters_are_editable_and_are_not_locked() { } [Observation] public void should_see_some_chapters_are_not_editable_and_are_locked() { } } and the output from the specunit report tool is: Chapter Editing specifications    1 context, 2 specifications Chapter Editing, when pre editing a chapter    2 specifications should see some chapters are editable and are not locked should see some chapters are not editable and are locked The intent is to provide a clear mapping from story –> scenarios –> bdd tests.

  Read the article

• Can you disable UNC paths in Windows?

  - by Evan

  We are trying to lock down a Terminal Server, and want to remove a commercial package's ability to accept UNC file paths, ie. paths in the app can then only be entered using the windows drive letters. Is there any way to do this in Windows? Can we disallow UNC paths for just the app? Can we disallow UNC paths for the entire Terminal Server session? The intention is to allow the application to only write to certain directories (as mapped in the Terminal Server session). The aim is to prevent the output of files to directories that the users have access to, but are not mapped in the Terminal Server session.

  Read the article

• Audio doesn't work on Windows XP guest (WS 7.0)

  - by Mads

  I can't get audio to work with on a Windows XP guest running on VMware Workstation 7.0 and Ubuntu 9.10 host. Windows fails to produce any audio output and the Windows device manager says the Multimedia Audio Controller is not working properly. Audio is working fine in the host OS. When I open Multimedia Audio Controller properties it says: Device status: The drivers for this device are not installed (Code 28) If I try to reinstall the driver I get the following error message: Cannot Install this Hardware There was a problem installing this hardware: Multimedia Audio Controller An Error occurred during the installation of the device Driver is not intended for this platform Has anyone else experienced this problem?

  Read the article

• Middle Mouse Button does not work in XFCE / Arch Linux

  - by Alp

  I have the XFCE desktop manager installed on my Arch Linux system. With E17 (Enlightenment desktop manager) i had no problems with my mouse: all buttons worked correctly out of the box. But in XFCE my middle mouse button does not fire an event at all (no output with xev). Evdev seems to identify my mouse correctly (Razer Deathadder) because it echoes its name in the xorg logs. I have no idea what could cause this and how to debug the problem. I start both e17 and xfce with startx. Here is my ~/.xinitrc: exec startxfce4 --with-ck-launch #exec enlightenment-start

  Read the article

• Connection problem between redmine and svn

  - by WombaT

  I have server controlled by Debian 6.0. I installed and configured redmine some time ago, and now configured svn server. Now i'm trying to configure redmine to be able to view svn repository. URL is: https://192.168.11.78/svn/bee Connection is not working, log show this error: Error parsing svn output: #<REXML::ParseException: No close tag for /lists/list> Google says that its common error, and its possible to fix it by permamently accept of server certificate so i did it and nothing. Still dont work. Later, i added [global] store-plaintext-passwords = no in file .subversion/servers I did this (and cert accept) for both root and www-data users. Nothing helped, still got error in redmine The entry or revision was not found in the repository. What else i can do with it?

  Read the article

• Can't bind spawn-fcgi to address

  - by Xeoncross

  Following some nice instructions I am almost through setting up PHP to run on nginx. However, every time I try to start spawn-fcgi I get an error message demo@desktop:/usr/bin$ sudo /etc/init.d/php-fastcgi start spawn-fcgi: bind failed: Cannot assign requested address My /etc/init.d/php-fastcgi startup script is: #!/bin/bash PHP_SCRIPT=/usr/bin/php-fastcgi FASTCGI_USER=demo RETVAL=0 case "$1" in start) su - $FASTCGI_USER -c $PHP_SCRIPT RETVAL=$? ;; stop) killall -9 php5-cgi RETVAL=$? ;; restart) killall -9 php5-cgi su - $FASTCGI_USER -c $PHP_SCRIPT RETVAL=$? ;; *) echo "Usage: php-fastcgi {start|stop|restart}" exit 1 ;; esac exit $RETVAL console output which loads /usr/bin/php-fastcgi #!/bin/sh /usr/bin/spawn-fcgi -a 127.0.0.1 -p 9000 -C 6 -u demo -f /usr/bin/php5-cgi One thing to note is that I am running the PHP cgi as the user "demo" which is my account.

  Read the article

• Are there any font rendering libraries for games development that support hinting?

  - by Richard Fabian

  I've used angel code's bitmap font generator quite a bit and though it's very good, I wondered if there would be a way of using the hinting information to provide a better readable result by using hinting to provide differing thickness based on size/pixel coverage. I imagine any solution would have to use the distance field tech presented in the valve paper on smoothing fonts while maintaining or reducing asset size. (http://www.gamedev.net/community/forums/topic.asp?topic_id=494612) but I haven't found any demos of it being used with hinting information turned on or included in the field gradients in any way. Another way of looking at this is whether there are any font bitmap generators that will output mipmaps that still maintain their readability in the face of pixel size. I think the lower mip levels would try to guarantee fill and space where it is necessary to maintain readability/topology over maintaining style/form (the point of hinting). In response to "Is there a reason you can't just render the size you want", the problem lies in the fact that font rasterisers currently don't render in 3D, and hinting information would be important in different amounts due to the pixel density being different along different axes, even differing in importance along the length of a string due to the size reducing over distance. For example, I only want horizontal hinting in a texture that is viewed from the side, and only really want vertical hinting in a font that is viewed from below or above. This isn't meant to be a renderer that tries to render a perfect outline as accurately as possible, as hinting distorts the reality of the font, instead this is meant to be a rendering solution for quite static scenes, but scenes that have 3D transformed and warped text layout. In this case the legibility is important, more important than the accuracy of representation of the polygon shape.

  Read the article

• Problem with SLATEC routine usage with gfortran

  - by user39461

  I am trying to compute the Bessel function of the second kind (Bessel_y) using the SLATEC's Amos library available on Netlib. Here is the SLATEC code I use. Below I have pasted my test program that calls SLATEC routine CBESY. PROGRAM BESSELTEST IMPLICIT NONE REAL:: FNU INTEGER, PARAMETER :: N = 2, KODE = 1 COMPLEX,ALLOCATABLE :: CWRK (:), CY (:) COMPLEX:: Z, ci INTEGER :: NZ, IERR ALLOCATE(CWRK(N), CY(N)) ci = cmplx (0.0, 1.0) FNU = 0.0e0 Z = CMPLX(0.3e0, 0.4e0) CALL CBESY(Z, FNU, KODE, N, CY, NZ, CWRK, IERR) WRITE(*,*) 'CY: ', CY WRITE(*,*) 'IERR: ', IERR STOP END PROGRAM And here is the output of the above program: CY: ( 5.78591091E-39, 5.80327020E-39) ( 0.0000000 , 0.0000000 ) IERR: 4 Ierr = 4 meaning there is some problem with the input itself. To be precise, the IERR = 4 means the following as per the header info in CBESY.f file: ! IERR=4, CABS(Z) OR FNU+N-1 TOO LARGE - NO COMPUTA- ! TION BECAUSE OF COMPLETE LOSSES OF SIGNIFI- ! CANCE BY ARGUMENT REDUCTION Clearly, CABS(Z) (which is 0.50) or FNU + N - 1 (which is 1.0) are not too large but still the routine CBESY throws the error message number 4 as above. The CY array should have following values for the argument given in above code: CY(1) = -0.4983 + 0.6700i CY(2) = -1.0149 + 0.9485i These values are computed using Matlab. I can't figure out what's the problem when I call CBESY from SLATEC library. Any clues? Much thanks for the suggestions/help. PS: if it is of any help, I used gfortran to compile, link and then create the SLATEC library file ( the .a file ) which I keep in the same directory as my test program above. shell command to execute above code: gfortran -c BesselTest.f95 gfortran -o a *.o libslatec.a a GD.

  Read the article

• Resizing an iscsi LUN on an EMC under Linux RHEL 5

  - by niXar

  I expanded a LUN on my SAN (from 30G to 50G), and tried all kind of voodoo but it looks like the system still believes the device is still small, despite showing me the new size alright. # blockdev --getsize64 /dev/sdl 53687091200 # dd if=/dev/sdl skip=$(( 31*1024*1024*1024/512 )) count=1|hexdump -C dd: reading `/dev/sdl': Input/output error The dd line works for blocks below the 30G original size. If I reboot, the problem goes away, but I don't want to since the machine has a dozen VMs running. I tried various magic, such as: iscsiadm -m node -R -I iface0 ... to no avail. Note: I'm not using multipath.

  Read the article

• Fun with RadCaptcha for ASP.NET AJAX and OCR software

  A friend of mine was evaluating OCR software and finally decided to go with FineReader. I was curious what would happen if we put the RadCaptcha control in. Will the advanced OCR manage to decode it or not? At first he showed me a test run with the RadCaptcha demo description, to get an idea of the basic output:    Naturally, the captured description text was no problem - only a few characters were misread but then corrected with the spellcheck. Next, the real test was performed:    These were only a couple of the results, but there is no need to post the rest of the tests - none of the RadCaptcha images were recognized by the OCR software. Here are the CaptchaImage settings used in the tests: Background Noise Level: Low /default value Line Noise Level: Low /default value Font Warp Factor: Low /Medium is default value...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• WinXP How to Tunnel LPT over USB

  - by Michael Pruitt

  I have a windows program that accesses a device connected to a LPT (1-3) 25 pin port. The communication is bidirectional, and I suspected the control lines are also accessed directly. I would like to migrate the device to a machine that does not have a LPT port. I saw the dos2usb software, but that takes the output (from a DOS program) and 'prints' it formatted for a specific printer. I need a raw LPT connection, and a cable that provides access to all the control signals. I do have a USB to 36-pin Centronics that may have the extra signals. I use it with a vinyl cutter that doesn't like most of the USB dongles. It comes up as USB001. Would adding and sharing a generic printer, then mapping LPT1 to the share get me closer? Would that work for a parallel port scanner? My preferred solution is a USB cable with a driver that will map it to LPT1, LPT2, or LPT3.

  Read the article

• July, the 31 Days of SQL Server DMO’s – Day 20 (sys.dm_tran_locks)

  - by Tamarick Hill

  The sys.dm_tran_locks DMV is used to return active lock resources on your server. Locking is a mechanism used by SQL Server to protect the integrity of data when you have multiple users that may potentially access the same data at the same time. Let’s run a query against this DMV so we can analyze the results. SELECT * FROM sys.dm_tran_locks As we can see, its a lot of lock information returned from this DMV. I will not go into detail about each of the columns returned, but I will touch on the ones that I feel are the most important. The first column in the output is the resource_type column which tells you the type of lock a particular row represents. It could be a PAGE lock, RID, OBJECT, DATABASE, or several other lock types. The resource_database_id represents the id of the database for a particular lock resource. The resource_lock_partition column represents the ID of a lock partition. When you have a table that is partitioned, locks can be escalated to the partition level before going to a table level lock. The request_mode column gives us information about the type of lock that is being requested. From the screenshots above we see RangeS-S locks which represent a share range lock and IS locks which represent Intent Shared locks. The request_status column displays whether the lock has been granted or whether the lock is waiting to be acquired. The request_session_id  shows the session_id that is requesting the lock. This DMV is the best place to go when you need to identify the exact locks that are being held or pending for individual requests. You might need this information when you are troubleshooting severe blocking or deadlocking problems on your server. For more information on this DMV, please see the below Books Online link: http://msdn.microsoft.com/en-us/library/ms190345.aspx Follow me on Twitter @PrimeTimeDBA

  Read the article

• Nexenta/OpenSolaris filer kernel panic/crash

  - by ewwhite

  I've an x4540 Sun storage server running NexentaStor Enterprise. It's serving NFS over 10GbE CX4 for several VMWare vSphere hosts. There are 30 virtual machines running. For the past few weeks, I've had random crashes spaced 10-14 days apart. This system used to open OpenSolaris and was stable in that arrangement. The crashes trigger the automated system recovery feature on the hardware, forcing a hard system reset. Here's the output from mdb debugger: panic[cpu5]/thread=ffffff003fefbc60: Deadlock: cycle in blocking chain ffffff003fefb570 genunix:turnstile_block+795 () ffffff003fefb5d0 unix:mutex_vector_enter+261 () ffffff003fefb630 zfs:dbuf_find+5d () ffffff003fefb6c0 zfs:dbuf_hold_impl+59 () ffffff003fefb700 zfs:dbuf_hold+2e () ffffff003fefb780 zfs:dmu_buf_hold+8e () ffffff003fefb820 zfs:zap_lockdir+6d () ffffff003fefb8b0 zfs:zap_update+5b () ffffff003fefb930 zfs:zap_increment+9b () ffffff003fefb9b0 zfs:zap_increment_int+68 () ffffff003fefba10 zfs:do_userquota_update+8a () ffffff003fefba70 zfs:dmu_objset_do_userquota_updates+de () ffffff003fefbaf0 zfs:dsl_pool_sync+112 () ffffff003fefbba0 zfs:spa_sync+37b () ffffff003fefbc40 zfs:txg_sync_thread+247 () ffffff003fefbc50 unix:thread_start+8 () Any ideas what this means?

  Read the article

• Mac OS ? Assembly Language Esoteria

  - by veryfoolish

  I've been playing around with assembly and object files in general on Mac OS ? and was wondering if somebody could provide some edification. Specifically, I'm wondering what the extra code GCC generates when compiling the C file in the following example does. I have a toy C program so I can comprehend the assembly output. int main() { int a = 5; int b = 5; int c = a + b; } Running this through gcc -S creates the following assembly: .text .globl _main _main: LFB2: pushq %rbp LCFI0: movq %rsp, %rbp LCFI1: movl $5, -4(%rbp) movl $5, -8(%rbp) movl -8(%rbp), %eax addl -4(%rbp), %eax movl %eax, -12(%rbp) leave ret LFE2: .section __TEXT,__eh_frame,coalesced,no_toc+strip_static_syms+live_support EH_frame1: .set L$set$0,LECIE1-LSCIE1 .long L$set$0 LSCIE1: .long 0x0 .byte 0x1 .ascii "zR\0" .byte 0x1 .byte 0x78 .byte 0x10 .byte 0x1 .byte 0x10 .byte 0xc .byte 0x7 .byte 0x8 .byte 0x90 .byte 0x1 .align 3 LECIE1: .globl _main.eh _main.eh: LSFDE1: .set L$set$1,LEFDE1-LASFDE1 .long L$set$1 LASFDE1: .long LASFDE1-EH_frame1 .quad LFB2-. .set L$set$2,LFE2-LFB2 .quad L$set$2 .byte 0x0 .byte 0x4 .set L$set$3,LCFI0-LFB2 .long L$set$3 .byte 0xe .byte 0x10 .byte 0x86 .byte 0x2 .byte 0x4 .set L$set$4,LCFI1-LCFI0 .long L$set$4 .byte 0xd .byte 0x6 .align 3 LEFDE1: .subsections_via_symbols The LCFI1 section seems to contain the actual logic for the program, but I'm not sure what the misc. other stuff is for... also, is there any scheme these labels are following? I'm sorry this is such a vague question. I'd appreciate anything, including being pointed to a resource where I can find out more about this. Thanks!

  Read the article

• iptables rules keep showing up

  - by Omriko

  I just installed an ubuntu precise server, after a few weird communications issues I checked the iptables list and found: Chain INPUT (policy DROP) target prot opt source destination ACCEPT all -- anywhere anywhere ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT tcp -- 10.0.0.0/24 anywhere tcp spts:1024:65535 dpt:ssh state NEW ACCEPT icmp -- anywhere anywhere state NEW ACCEPT icmp -- anywhere anywhere state NEW ACCEPT icmp -- anywhere anywhere state NEW ACCEPT icmp -- anywhere anywhere state NEW DROP tcp -- anywhere anywhere tcp dpt:10520 state NEW DROP udp -- anywhere anywhere udp spts:1:65535 dpt:31337 state NEW DROP udp -- anywhere anywhere udp spts:1:65535 dpt:31338 state NEW DROP udp -- anywhere anywhere udp spts:1:65535 dpt:54320 state NEW DROP udp -- anywhere anywhere udp spts:1:65535 dpt:54321 state NEW DROP tcp -- anywhere anywhere tcp dpt:12345 state NEW DROP tcp -- anywhere anywhere tcp dpt:12346 state NEW DROP tcp -- anywhere anywhere tcp dpt:20034 state NEW DROP tcp -- anywhere anywhere tcp dpt:16600 state NEW DROP tcp -- anywhere anywhere tcp dpt:16660 state NEW DROP tcp -- anywhere anywhere tcp dpt:65000 state NEW DROP udp -- anywhere anywhere udp dpt:34555 state NEW DROP udp -- anywhere anywhere udp dpt:35555 state NEW DROP udp -- anywhere anywhere udp spts:netbios-ns:netbios-dgm dpts:netbios-ns:netbios-dgm state NEW DROP tcp -- anywhere anywhere tcp spts:1024:65535 dpt:netbios-ssn state NEW DROP tcp -- anywhere anywhere tcp spts:1024:65535 dpt:microsoft-ds state NEW DROP udp -- anywhere anywhere udp spt:microsoft-ds dpt:microsoft-ds state NEW DROP udp -- anywhere anywhere udp spts:1024:65535 dpt:microsoft-ds state NEW DROP tcp -- anywhere anywhere tcp spts:1024:65535 dpt:loc-srv state NEW DROP tcp -- anywhere anywhere tcp spts:1024:65535 dpt:5000 state NEW DROP tcp -- anywhere anywhere tcp spts:1024:65535 dpts:1025:1029 state NEW DROP udp -- anywhere anywhere udp spts:1:65535 dpt:loc-srv state NEW ACCEPT tcp -- anywhere anywhere tcp spts:1024:65535 dpt:28082 state NEW DROP all -- anywhere anywhere state NEW Chain FORWARD (policy DROP) target prot opt source destination Chain OUTPUT (policy DROP) target prot opt source destination ACCEPT all -- anywhere anywhere ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT tcp -- anywhere anywhere tcp spts:tcpmux:65535 dpts:tcpmux:65535 state NEW ACCEPT udp -- anywhere anywhere udp dpts:1:65535 state NEW ACCEPT icmp -- anywhere anywhere state NEW ACCEPT tcp -- anywhere anywhere tcp spts:1024:65535 dpt:28082 state NEW DROP all -- anywhere anywhere state NEW I tried to wipe the rules, I disabled UFW, Ive rewritten and saved iptables rules according to this guide, but every minute or so the old rules return.... I checked crontab for scheduled tasks, there is nothing in there but still these rules appear every minute... please help!

  Read the article

• VoteCounts: bookmarklet to display up/down votes even for rep<1k

  - by SztupY

  Screenshot / Code Snippet About This small bookmarklet will allow anyone to use the "vulnerability" of the API that it allows you to check the up/down vote count - a feat you could normally achieve by being a 1k+rep user. Mainly useful for sites where you don't have this amount of rep, but want to check the stats of the more controversial questions (usually on meta) No API key is actually used here, but it's trivial to add one. License I don't think a code like this deserves anything other than WTFPL Download It's the following line (javascript - 375 bytes): javascript:(function(){a='jsonp';c=' .vote-count-post';d='up_vote_count';e='down_vote_count';$.ajax({url:document.location.href.replace(/(http:\/\/)(.*)(\/questions\/.*)\/.*/,'$1api.$2/1.0$3'),dataType:a,jsonp:a,success:function(x){b=x.questions[0];$('#question'+c).html(b[d]+"-"+b[e]);$.each(b.answers,function(z,y){$('#answer-'+y.answer_id+c).html(y[d]+"-"+y[e])})}})})() EDIT: This is longer, but it will make the result look like exactly on SO. Took a while to make it exactly 508 chars, so it works with IE too. javascript:(function(){w=function(t,q){l='_vote_count';h='up'+l;j='down'+l;k='</div>';s='<div style="color:';$(t).html(s+'green">'+(q[h]?'+':'')+q[h]+k+'<div class="vote-count-separator">'+k+s+'maroon">'+(q[j]==0?'':'-')+q[j]+k)};a='jsonp';c=' .vote-count-post';$.ajax({url:document.location.href.replace(/(http:\/\/)(.*)(\/questions\/.*)\/.*/,'$1api.$2/1.0$3'),dataType:a,jsonp:a,success:function(x){b=x.questions[0];w('#question'+c,b);$.each(b.answers,function(z,y){w('#answer-'+y.answer_id+c,y)})}})})() Platform For any jquery/bookmarklets compatible browser. Tested with Chrome, FF3.6 and IE8 for SU,SO,MSO Contact sztupy.hu Code It was written in notepad already in minified form. Used firebug to debug. Code is above. Contribute(=decrease code size or make the output nicer) any way you want. I'd be great if you'd do the second code shorter than 508 bytes. Known bugs If a question has more than 30 answers then some of the answers won't be resolved. This can be solved easily for <=100 answers, but for questions with more than 100 answers this is more difficult EDIT: updated to API version 1.0. Answers doesn't work yet.

  Read the article

• How to SSH to guest ubuntu OS in vmplayer4

  - by Grace

  I have installed vmplayer4.0.4 on Windows7, and install ubuntu12.04 as Guest OS. Basically i have two problems: Default vmplayer use NAT for network access. I could ping the guest OS from the Host OS. But how could i access the Guest OS from outside the Host OS? If i change to Bridged Mode, sure the Guest Ubuntu OS could get DHCP ip in the same subnet as Host OS. But i could not ping the Guest OS from the Host OS, or vice versa, even if i disable the iptables firewall on Ubuntu Guest OS like following: iptables -F iptables -X iptables -t nat -F iptables -t nat -X iptables -t mangle -F iptables -t mangle -X iptables -P INPUT ACCEPT iptables -P FORWARD ACCEPT iptables -P OUTPUT ACCEPT I could not figure it out, could anyone help on this issue? Thanks in advance.

  Read the article

• How to get headphones and speakers working at the same time?

  - by Borek

  I have a Gigabyte P55-UD3 motherboard which comes with a Realtek sound card and audio header for the front panel. My headset is permanently connected to the front panel (mic in, headphones in) and I also have speakers connected at the rear of the computer. What I want to achieve is that both the headphones and the speakers work at the same time. On my old PC with Realtek, I was able to do this by clicking "Device advanced settings" in the Realtek HD Audio Manager and then clicking "Make front and rear output devices playback two different audio streams simultaneously" and then doing some reassigning of front/rear settings in the Realtek Audio Manager (can't remember the details). But that doesn't seem to be working now - either the speakers play sounds or the headphones, not both at the same time. To pose the question differently, Windows plays the sounds on the "default device". I'd like to make both headphones and the speakers kind of like the default devices.

  Read the article

• hp pavilion g6 1250 with a BCM 4313 doesn't see any wireless networks

  - by Ahmed Kotb

  i have tried using ubuntu 10.04 and ubuntu 11.10 and both have the same problem the driver is detected by the additional propriety drivers wizard and after installation, ubuntu can't see except on wireless network which is not mine (and i can't connect to it as it is secured) There are plenty of wireless networks around me but ubuntu can't detect them and if i tried to connect to one of them as if it was hidden connection time out. the command lspci -nvn | grep -i net gives 04:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) 05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05) iwconfig gives lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=19 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off i guess it is something related to Broadcom driver .. but i don't know , any help will be appreciated UPDATE: ok i installed a new copy of 11.10 to remove the effect of any trials i have made i followed the link (http://askubuntu.com/q/67806) as suggested all what i have done now is trying the command lsmod | grep brc and it gave me the following brcmsmac 631693 0 brcmutil 17837 1 brcmsmac mac80211 310872 1 brcmsmac cfg80211 199587 2 brcmsmac,mac80211 crc_ccitt 12667 1 brcmsmac then i blacklisted all the other drivers as mentioned in the link the wireless is still disabled.. in the last installation installing the Brodcom STA driver form the additional drivers enabled the menu but as i have said before it wasn't able to connect or even get a list of available networks so what should i do now ? the output of command rfkill list all rfkill list all 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no

  Read the article

• How do I stop Gimp from autolaunching on startup?

  - by Joshua Fox

  Gimp launches every time I log into Xubuntu (v. 13.10). Gimp is not shown under Settings Manager- Sessions and startup. It does not appear in ~/.config/autostart. I immediately close Gimp in these cases, so it is not running when I shut down the session. How do I stop Gimp from autolaunching on startup? Diagnostic Info: Note that cd / find . -name gimp.desktop Only produces ./usr/share/applications/gimp.desktop and nothing else Here is the output of grep -lIr 'gimp' ~/ ~/Gimp-search-results.txt sbin/vgimportclone home/joshua/.gimp-2.8/controllerrc home/joshua/.gimp-2.8/tags.xml home/joshua/.gimp-2.8/dockrc home/joshua/.gimp-2.8/gimprc home/joshua/.gimp-2.8/themerc home/joshua/.gimp-2.8/templaterc home/joshua/.gimp-2.8/gtkrc home/joshua/.gimp-2.8/sessionrc home/joshua/.gimp-2.8/toolrc home/joshua/.gimp-2.8/pluginrc home/joshua/.gimp-2.8/menurc home/joshua/Gimp-search-results.txt home/joshua/.local/share/ristretto/mime.db home/joshua/.wine/drive_c/windows/system32/gecko/1.4/wine_gecko/dictionaries/en-US.dic home/joshua/.wine/drive_c/windows/syswow64/gecko/1.4/wine_gecko/dictionaries/en-US.dic home/joshua/.cache/software-center/piston-helper/rec.ubuntu.com,api,1.0,recommend_app,skype,,0495938f41334883bd3a67d3b164c1d1 home/joshua/.cache/software-center/piston-helper/rec.ubuntu.com,api,1.0,recommend_app,gnome-utils,,91bba9b826fb21dbfc3aad6d3bd771cb home/joshua/.cache/software-center/piston-helper/rec.ubuntu.com,api,1.0,recommend_app,icedtea-plugin,,7bb5e4ad0469ef8277032c048b9d7328 home/joshua/.cache/software-center/piston-helper/reviews.ubuntu.com,reviews,api,1.0,review-stats,any,any,,1c66e24123164bb80c4253965e29eed7 home/joshua/.cache/software-center/piston-helper/rec.ubuntu.com,api,1.0,recommend_app,wine1.4,,2bac05a75dcec604ee91e58027eb4165 home/joshua/.cache/software-center/piston-helper/software-center.ubuntu.com,api,2.0,applications,en,ubuntu,saucy,amd64,,32b432ef7e12661055c87e3ea0f3b5d5 home/joshua/.cache/software-center/apthistory.p home/joshua/.cache/software-center/reviews.ubuntu.com_reviews_api_1.0_review-stats-pkgnames.p home/joshua/.cache/oneconf/861c4e30b916e750f16fab5652ed5937/package_list_861c4e30b916e750f16fab5652ed5937 home/joshua/.cache/sessions/xfwm4-23e853443-fb4b-42fd-aa61-33fa99fdc12c.state home/joshua/.cache/sessions/xfce4-session-athena:0 home/joshua/.config/abiword/profile

  Read the article

• Computer starts, POSTs normal, no video

  - by Annath

  So, I recently tried to start up an old computer of mine. It would not power on, so I replaced the PSU. When I powered it on, all the fans spun up and the POST beeps indicated a normal startup. The problem was there was no video output. Every couple of minutes, I hear the post code again. I think it is restarting after POST, but without video I have no idea why. Does anyone have an idea as to why this is happening, and how to fix it? EDIT: The video card is a PCI-e card. There is no integrated graphics on the motherboard. If I remove the video card, the POST indicates a missing card. When I put it back, it goes back to normal, so I know that it recognizes that the card exists.

  Read the article

• Excel: conditionally format a cell using the format of another, content-matching cell

  - by Eric A. Meyer

  I have an Excel spreadsheet where I’d like to be able to create a “key” of formatted cells with unique values, and then in another sheet format cells using the key formatting. So for example, my key is as follows, with one value per cell and the visual formatting indicated in parentheses: A (red background) B (green background) C (blue background) So that’s on one sheet (or in a remote corner of the current sheet—whichever is better). Then, in an area that I mark for conditional formatting, I can type one of those three letters and have the cell where I typed it visually formatted according to the key. So if I type a “B” into one of the conditionally formatted cells, it gets a green background. (Note that I’m using backgrounds here solely for ease of explanation: ideally I want to have all visual formatting copied over, whether it’s foreground color, background color, font weight, borders, or whatever. But I’ll take what I can get, obviously.) And—just to make it extra-tricky—if I change the formatting in the key, that change should be reflected in cells that reference the key. Thus, if I change the “B” formatting in the key from a green background to a purple background, any “B” in the main sheet should switch to the new color. Similarly, it should be possible to add or remove values from the key and have those changes applied to the main data set. I’m okay with the formatting-update-on-key-change being triggered by clicking a button or something. I suspect that if any of this is possible it will require VBA, but I’ve never used it so I’ve no idea where to start if that’s the case. I’m hoping it’s possible without VBA. I know it’s possible to just use multiple conditional formats, but my use case here is that I’m trying to create the above-described capability for someone who isn’t conversant with conditional formatting. I’d like to let them be able to define a key, update it if necessary, and keep on truckin’ without me having to rewrite the spreadsheet’s formatting rules for them. --- UPDATE --- So I think I was a bit unclear about my original request. Let me try again with an image. The image shows the “key” on the left, where values and styles are defined using keyboard and mouse input. On the right, you see the data that should be formatted to match the key. Thus if I type a “C” into a cell in the Data area, it should be blue-backed. Furthermore, if I change the formatting of “C” in the Key to have a purple background, all the “C” cells should switch from blue to purple. For further craziness, if I add more to the Key (say, “D” with a yellow background) then any “D” cells will be styled to match; if I remove a Key entry, then matching values in the Data area should revert to default styling. So. Is that more clear? Is it possible, in whole or in part? I don’t have to use conditional formatting for this; in fact, at this point I suspect I probably shouldn’t. But I’m open to any approach!

  Read the article

< Previous Page | 397 398 399 400 401 402 403 404 405 406 407 408  | Next Page >